• Design and building of infrastructure/ Water plant / building engineering works (Civil / Structural)
• Conducting technical feasibility study, life cycle study and planning for building engineering.
• Preparation of design report, calculation, drawings, specification, cost estimation and details / schedules for projects.
• Assist Project Manager in up-keeping the project ISO quality documentation and records.
• Evaluation of tenders and preparation of tender assessment reports.
• Assist Professional Engineer in liaison preparation and follow up of authority submission.

Requirements:

• Bachelor Degree / Diploma in Civil / Mechanical / Electrical Engineering
• Minimum 5 years hands-on design experience in building and/or infrastructure projects
• Good project management and technical skills
• Familiar with local code and authority submission procedures
• Team player and able to work independent with minimal supervision
• Proficient in AutoCAD and BIM
• Good communication skills; ability to work well in a team
• Must hold valid Singapore License

Job Responsibilities

• Respond to the recovery and repair of Ride & Show mechanical, electrical, hydraulic, and pneumatic equipment at Universal Studios Singapore (USS).
• Troubleshoot failed components using basic test equipment, schematics/prints, and specialized tools, equipment, and resources.
• Report to the Team Lead during the reset of Ride & Show systems to ensure safe operation.
• Support the Attractions Operations team in the safe evacuation of guests from ride vehicles during downtime.
• Operate company forklifts or specialized vehicles, such as high-reach boom lifts, when required for the recovery of rides and shows (training will be provided by the company).
• Operate equipment and tools safely in accordance with general handling practices and Safe Work Procedures.
• Log completion of inspections, corrective actions, and/or repairs made, including a list of applicable parts used.
• Generate required Work Orders for repair work performed.

Job Requirements

• Diploma in Mechanical, Electrical, Mechatronic Engineering, or a related field of study.
• 3-5 years of experience in troubleshooting and repairing basic to moderately complex systems, including electrical/PLC controls, electro-mechanical devices, hydraulics, pneumatics, and mechanical equipment (experience in these areas will be an advantage).
• Strong ability to troubleshoot electromechanical problems and use good judgment in high-pressure situations.
• Ability to work at height.
• Willingness to perform 12-hour shift work, including permanent day shifts, weekends, and public holidays.

Key Responsibilities and Duties

· Coordinate all IT Tasks of the project.

· Collaboration with 2nd and 3rd level of support of company.

· Familiar with CCTV installation and configuration

· IT assets documentation & administration.

· Able to manage multiple complex technical issues.

· Planning and installation of new site offices

· Active Directory knowledge

· File server administration

· ITIL cert is preferrable.

· CCNA or equivalent cert is preferrable.

· Any other IT tasks as assigned.

Requirements

· Proven experience as IT Technician or relevant position.

· Excellent diagnostic and problem solving skills.

· Excellent communication ability.

· Outstanding organizational and time management skills.

· In-depth understanding of diverse computer systems and networks.

· Good knowledge of internet security and data privacy principles.

· Certification as IT Technician will be an advantage (e.g. Comp TIAA + Microsoft Certified IT Professional)

Job Description

• Hardware support: technical diagnosis and coordination with OEM vendors for repair of defective hardware for a variety of devices including desktops/laptops/workstations, mobile devices, tablets, meeting room equipment, printers etc.
• Software support: diagnosis and resolution of software functionality for both the operating system (Win 11 and Mac OS) and standard desktop applications (MS 365 and etc.)
• IMACD: physical installations, moves, adds, changes, and de-installs for a wide variety of supported hardware devices including desktops/laptops/workstations, mobile devices, tablets, meeting room equipment, printers and etc. and supported software
• Enhanced support for VIP users including 7x24 on-call support
• Coordinate with infrastructure teams to resolve issues with network, servers or other infrastructure devices or services that impact the normal work of end users
• Support hardware and software changes (e.g. hardware device change/refresh, system upgrade/migration, patch update, etc.) for end users
• Asset management support for end user devices by following defined processes
• Provide smart hand support for all kinds of hardware such as printers, servers, network devices, backup devices, meeting room equipment, scientific devices etc.
• Onsite support for events such as trade shows or special meetings
• Regular checks for IT Room devices and Meeting Room equipment when required
• Deployment services for large-scale efforts include asset auditing and discovery, project support, image integration, on-site installation, user self-installation, migration, and asset recovery governed with full project status and reporting

Requirements

• 2-3 years of deskside support experience (MNC support experience and VIP support experience preferred)
• Experience in using ServiceNow is preferred
• Good deskside support technical skills and basic infrastructure knowledge
• Good communication and coordination skills
• Fluent English in both writing and speaking
• Be polite, patient, helpful
• Have a good sense of service mindset
• Have a good capacity of adaptability
• Willing to work overtime when required

Responsibilities:

• Provide maintenance and support for Customers' IT Network Services.
• Hands-on experience in troubleshooting large, complex networks comprises of 10 to 20 nodes.
• Experience working with LAN/WAN/WLAN which include:

1. Cisco Wireless, Routers, Catalyst and Nexus Switches, Firepower, IPS/IDS, ISE, ASA, ESA, WSA, SMA
2. Alcatel Wireless and OmniSwitch
3. Arista Switches and Cloudvision
4. Fortinet, Checkpoint, SolarWinds NPM/NCM/NTA, F5 LTM and Aruba ClearPass
   

• Perform break-fix which include troubleshooting and problem identification for any network services.
• Develop test cases and conduct proof of concept tests on new software and hardware prior to upgrade/deployment.
• Perform the role of Project Lead / Coordinator in project management for small to medium size projects or Service Requests.
• Work closely with Service Delivery Manager to fulfil deliverables, service report and operational request.
• Establish TAC cases with the principal vendor for complex problem until its resolved.
• Mentor Tier 1 Engineers and conduct training to align the Engineers’ technical competency.

Requirements:

• Required to have minimum 3 – 5 years of hands-on network technical support experience in SI Environment.
• Cisco and Arista certification is preferred.
• Experience with LAN, WAN, WLAN, Data and Security networking in implementation, maintenance support and break-fix.
• Fast-paced environment
• Proven analytical and problem-solving abilities.
• Highly self-motivated and directed, with keen attention to detail.
• Experience working in a team-oriented, collaborative environment.
• Good communication and writing skills.
• Strong customer service orientation.
• Able to work in 24 x 7 standby duties

Work location: Jurong East

Responsibilities:

• Reviews technical specifications, drawings, procedures, and standards pertaining to project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents, and weekly update drawing register form documents controller and distribute to project Quality Assurance personnel.
• Administrates the project's internal quality audit to ensure compliance with the project quality plan.
• Monitors the inspection and documentation activities of the Quality Assurance Inspector to ensure compliance with the inspection test plan and project quality requirements
• Resolves quality-related issues arising from subcontractor and in-house production
• Ensures protection and preservation of various systems
• Ensures updates on electrical completion and mechanical completion progress in the project database
• Assigns the systems to be tested by the various supervisors and technicians involved in the operation
• Reviews the quality work processes to enhance efficiency and productivity
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, Quality Assurance Department, and vendors
• Reports non-conformance and issue improvement notes where necessary
• Any other assigned duties and responsibilities

Requirements:

• Degree in Naval Architecture, Marine and Offshore or Electrical Engineering
• Minimum 3 years of relevant experience in Quality Assurance working experience, and the offshore or marine industry

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Summary

The Business Support Executive is responsible to provide high-quality customer support through processing orders to shipment and delivery of orders. The Executive is also responsible for managing external customers and factories, coordinating with internal colleagues. This role also involves answering calls or emails from customers, participating in meetings with the factories and Sales.

Responsibilities

• Attend to pre-sales enquiries on product availability, lead time and price.
• Initiate and follow up on new item creation/customer creation in the system.
• Customer PO and contract review, including but not limited to the price and cost analysis, contract clause, and credit.
• Ensure price and credit have been approved before entering the ERP system.
• PO operation based on the sales order demand, track with vendors not only the inter-company vendor but the 3rd party about the schedule to meet customer’s demand.
• Daily order tracking & updating to ensure project schedule is under control.
• The shipment arrangement includes getting items from vendor and schedule pickup from customer.
• Follow-up on payment and forwarder details with customers and the factory.
• Review LC draft, prepare and collate documents from various factories for LC presentation.
• Coordinate with related parties on product quality issues.
• Communicate and provide timely responses between customer, sales, operation and factory.
• Generate and update sales order backlog reports to the sales & customer for update.
• Weekly & monthly sales & order forecast collection and summary.
• Support request from management e on reports from management’s request.
• Support manager to monitor the execution process of commercial contracts to conform to the company compliance & policy.
• Any other tasks assigned by manager.

Requirements

• Minimum Diploma or equivalent with experience in Customer Service support for at least 3 years.
• Work experience in import/export business, order fulfilment and management or purchasing function is desired.
• Responsible and reliable with integrity, highly adaptable and a great sense of teamwork.
• Willingness to learn new skills and open to development, willing to work extra hours if required.
• Proficient in Microsoft Office & ERP systems, analytical and sensitive to numbers.
• Good interpersonal and communication skills.
• Strong sense of urgency and self-motivation.
• Customer-focused, clear thinker and team player.

Summary

Responsible for identifying new leads/accounts/channels within the Chromatography products/territory markets and to meet/exceed the set goals. Be the contact point of communication supporting and resolving all accounts enquiries. Execute pre-sales and post sales activities.

Key accountabilities

Overall

• Responsible for orders and revenue growth of Chromatography products in Singapore.
• Develop and maintain good business partnership with all customers.
• Network actively with the scientific community to understand the current and future market trends.

Pre-sales (70%)

• Build funnels via account planning, mapping and data analysis to provide accurate forecast and sales strategy.
• Develop and execute go-to-market strategy.
• Work with other sales members to ensure offerings of total solutions and presenting to new and existing customers.
• Understand market trends and competitive situation.
• Faithful in updating sales opportunity records in CRM/Salesforce.com.

Post sales (30%)

• Conduct training and responsible for collateral development, joint customer visits and regular communication.
• Conduct after sales activities by providing technical and software training, method set-up and responding to customers’ queries.

Requirements

• Degree specialized in Chemistry or related scientific disciplines / MBA / PhD.
• 3 to 5 years sales experiences in a related industry.
• Mix of technical field experiences and customer facing roles.
• Good interpersonal, communication, presentation and negotiation skills.
• Highly motivated individual who can be a team player, assertive and result oriented with drive and high energy.
• Customer service oriented.
• Confident decision maker with good business acumen.
• Proficient in MS office and SFDC.
• Proficiency in QS3 usage is an added advantage.
• Proficient in training material development for internal and external use.

POSITION SUMMARY

Involves the completion of administrative and/or operational tasks relating to the front-line operation which may include data entry, ramp activities, sort activities, trace activities, dispatch activities and local customer service.

PRINCIPLE DUTIES, AND RESPONSIBILITIES

• Responsible for the completion of defined processes and procedures to deadline, ensuring accuracy, completeness, and compliance with relevant internal and external standards. Identifies anomalies as they arise and uses judgement based on rules and procedures to resolve. For complex issues, may escalate to senior team members.
• Performs defined procedures and processes with accuracy and completeness. Ensures time commitments and deadlines are met. Processes may include use of manual procedures or local or regional systems. Verifies data and completes procedural checks against predefined processes or criteria to ensure accuracy and quality. Uses appropriate tools and equipment as required. May make decisions relating to procedural checks, including situations where the outcome is not clearly indicated. Seeks support of senior team members as required. Provides feedback on processes and procedures proactively, making recommendations for continuous improvement to senior team members.
• Investigates and resolves problems or exception situations using systems or equipment, as appropriate. May act as the focal point for specific types of resolutions within the department and across other teams. Makes decisions based on clearly defined criteria and escalates others as appropriate to senior members. As required, evaluates options, escalates and gains approval for solutions that are outside of established parameters. Supports implementation of corrective actions.
• Uses appropriate communication methods to understand and share information with customers, team members including vendor staffs and other departments. Supports team members and other departments during process changes including participating in the development of appropriate Job Aids, procedures & on-the-job training materials. May deliver required training in accordance with defined standards.
• Validates or completes accurate and timely reporting. Supports/research relevant data and collates for analysis and interpretation. Prepares reports as required and may include recommendations for areas of improvement. Inputs data to company systems. Ensures accuracy of own and others’ data and completes checks of system to ensure data integrity is maintained.
• Ensures ongoing compliance with defined FedEx processes and procedures, relevant legislation and external regulations, and predefined agreements. Ensures required approvals are sought throughout processes. Notifies management of any non-compliance issues as they arise.
• Works closely with customer, team including vendor staffs and other departments to ensure accuracy of information and completion of processes to deadline. Also includes contact with customers, vendors or employees, to investigate or resolve issues as required. Aligns and gains commitment to actions from the different stakeholders.

JOB SPECIFICATIONS

Academic:

• Secondary education or equivalent
• Fresh graduates are welcome

Experience, knowledge & attribute:

• Accuracy & Attention to Detail
• Microsoft Office & PC Skills
• Planning & Organizing Skills
• Interpersonal Skills
• Problem Solving Skills

Job Description

• To assist engineering supervisor in the review of project orders relevant specification and/or data sheets
• Act as secondary check and make recommendation based on common industrial engineering practice, where necessary
• To aid supervisor in providing and implementing cost effective and best engineering solutions for project in order to stay competitive
• To support sales, project and production team on various aspects of technical/engineering matters
• To prepare and maintain accurate engineering documents, i.e. general assembly drawing with BOM, control schematic drawing, test procedure, data sheet and engineering library
• Manage engineering change function and ensure engineering documents are updated accordingly
• To support and assist engineering supervisor in providing sound engineering practice and engineering calculation where applicable in a timely manner top meet project timeline
• Providing field support for the customers to resolve after sales / any technical issues
• Travel along with Technicians to installation base and sites if situation arises
• To act as the main administrator and to maintain the SAP item master data
• To assist engineering supervisor and manager to drive the department’s improvement programs and/or process efficiency initiatives
• Perform additional related duties as requested or required

Job Requirement

• Bachelor degree / Diploma in Mechanical/Instrumentation or equivalent
• 1-2 years experience in either marine, oil & gas or automation industry is preferred
• Possess knowledge in instrumentation and control system
• Conversant with all industrial standards related to valve automation
• Able to read and interpret drawings, specifications and technical documents
• Knowledge of Autocad 2D/3D or drafting software and SAP will be an advantage
• Strong verbal and written communication skills
• Fresh graduates are welcome to apply for this entry level position

Mandatory Skills

Job scope

• Organize/Support Webex Event
• High profile meeting support and monitoring
• Advance troubleshooting for application related issue
• Issue TAC and collecting of log
• Perform daily system health check
• Perform CR
• Preparation of report and material
• Chinese speaking (prefer but not compulsory, to support our regional markets)

Mandatory Skills

Job scope

• Organize/Support Webex Event
• High profile meeting support and monitoring
• Advance troubleshooting for application related issue
• Issue TAC and collecting of log
• Perform daily system health check
• Perform CR
• Preparation of report and material
• Chinese speaking (prefer but not compulsory, to support our regional markets)

Electrical PLC Engineer

1. Experienced Electrical Design Engineer For HVAC System
2. Report to Engineering Department Electrical Manager.
3. Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT.
4. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel, Include Chiller Unit, Air Condenser Unit, AHU, Cold Room Provision Plant by use Auto Cad software.
5. Issue Documentation for Electrical & Instruments. Include Block Diagram, Control Philosophy, Cause & Effect Control Philosophy, Power Loading List, FAT testing procedure, Control Panel General Arrangement Drawing, Junction Box Drawing.
6. Choose electrical element and Instrument based on project requirement.
7. Use Siemens S7-400 PLC to do the HVAC System PLC program. Experience in CPU Redundancy, Modbus Communication Redundancy.
8. Use S7-1200 PLC to do the HVAC Control System PLC program
9. Use Siemens HMI software to do the Touch Screen Program.
10. Fully understood HVAC System D & ID, P & ID.
11. Marine and Offshore commissioning experience are required.
12. Sometimes will go to site trouble shooting.
13. Contact with client about the project requirement.
14. Contact with supplier about the control panel, Electrical Component and Instrument requirement.

Electrical Engineer

1. Experienced Electrical Design Engineer For HVAC System
2. Report to Engineering Department Electrical Manager.
3. Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT.
4. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel, Include Chiller Unit, Air Condenser Unit, AHU, Cold Room Provision Plant by use Auto Cad software.
5. Issue Documentation for Electrical & Instruments. Include Block Diagram, Control Philosophy, Cause & Effect Control Philosophy, Power Loading List, FAT testing procedure, Control Panel General Arrangement Drawing, Junction Box Drawing.
6. Choose electrical element and Instrument based on project requirement.
7. Fully Understand PLC control system.
8. Fully understood HVAC System D & ID, P & ID.
9. Marine and Offshore commissioning experience are required.
10. Sometimes will go to site for trouble shooting.
11. Contact with client about the project requirement.
12. Contact with supplier about the control panel, Electrical Component and Instrument requirement.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

About Our Company

Established in 1991, Gan Teck Kar is a privately-owned company started by food-loving folks who are passionate about bringing the finest products from all around the world. Our core business is the importation and distribution of premium food products to Singapore and Malaysia with business partners all around the Southeast Asian Region.

Job Highlights / Benefits

● Free meals provided

● In-house gym

● Staff discounts

● Walking distance from Tuas Link MRT

Title:

E-Commerce Sales Support

Reports to:

Sales Manager

Introduction:

We are looking for a dynamic individual to support and drive our company’s e-commerce business for multi-brands across different marketplace platforms and online buyers.

Responsibilities:

• Responsible for the overall e-commerce sales on Shopee, Lazada, Amazon and Shopify.
• Responsible for daily e-commerce operations, including uploading and monitoring product information on the platforms.
• Ensure timely execution of order process management.
• Update stock count, monitor shipment & delivery of orders, assure on-time deliveries and update systems accordingly.
• Provide customer service to support the sales growth.
• Attend queries, resolve any concerns on their orders with minimum TAT, maintain accurate and timely records of correspondences or discussions with customers.
• Prepare monthly summary sales reports.
• Plan and execute e-commerce promotion campaigns.
• Work with in-house designers to prepare promotion banners, category banners and campaign artwork.

Requirements:

• Energetic, collaborative and results-oriented person with 1-2 years of sales experience in FMCG. Experience in handling e-commerce platforms is a bonus.
• Possess at least a Diploma in any field.
• Self-starter who is technologically savvy, organised and able to operate well in a team under pressure.
• Possess good analytical skills to evaluate sales reports to build competitive sales strategy and promotions for each platform.
• Proficient in Microsoft Office Suite (Excel, PowerPoint, Word).

Job Responsibilities

• Manage targeted orders and monitor delivery status;
• Attend to inbound calls from customers;
• Handling incoming enquiries, complains and feedback and resolve them in accordance with the company’s standards;
• Resolve all in scope enquiries and take appropriate escalation actions when required;
• Provide alternatives solutions with excellent customer service via phone calls and emails;
• Follow-up with customer, when necessary, in a timely manner;
• Liaise with internal department to solve customer’s issue;
• Coordinate with delivery team on orders;
• Coordinate and provide sales support to the sales team;
• Maintain proper filling system;
• To perform any ad hoc assignments as assigned by immediate superior

Job Requirements

• Meticulous and detail oriented as the job requires documentation work;
• Able to work in fast pace environment;
• Excellent telephone etiquette with passion in customer service;
• Possess initiative to respond to customers’ needs with a commitment and customer service skills;
• Proficient in MS Office
• Good team player

Please forward your resume in MS WORD FORMAT to [email protected] [email protected]

Interested application kindly state your expected salary, last drawn salary and starting date

Job Purpose :

Engineer produces specifications for, design, develop technical drawings. He/she is expected to service and give technical advice to customers and fellow colleagues. He/she will be the main contact person for shutdown projects.

Duties and Responsibilities :

* Attend site / plant shutdown meeting

* Relay information to sales to work on preliminary quotation

* Liaise with Customers and Sales to carry out production of work orders as specified

* Liaise with Sales with regards to availability of raw materials for production or request purchase of required material when necessary.

* Monitoring progress reports on gasket usage by Customers during plan shutdown (container service) and generate weekly consumption report for customer.

* Compile and consolidate all expenses incurred by the Company (ie. manpower, overtime, meals and transportation) during shutdown project period.

* Attend to quality and technical problems at client's site and recommend the use of appropriate substitutes.

* Attend to quality and technical questions from fellow colleagues.

* Planning of work schedule for shutdown projects.

* Allocation of manpower for shutdown projects.

* Conduct product presentation to customer.

* Verify materials for use in manufacturing as specified in the work orders.

* Ensure smooth running of projects from beginning to the end.

* Ensure to meet customer's project deadline within time frame given.

* Ensure stocks are sufficient to support customers during the shutdown project.

* Maintain and housekeep all records of equipment drawings.

* Handle customer's complaint, if any

* Determine and plan training requirement needs of subordinating staff.

* Plan for the staffing requirements and recruitment of new employees if needed.

* Design technical training materials for other departments.

* Any other duties assigned by Business Unit Manager.

Reporting to General Manager, Sales & Marketing, this position will play a key role in driving our sales and marketing strategies focusing on technical support initiatives for global and Japanese customers. This role involves orchestrating joint trials, crafting technical proposals, and resolving complex issues. Additionally, the role will mentor and support technical executives within the Sales & Marketing division.

Responsibilities:

• Forge strategic alliances with Research & Development (R&D) team in Japan Headquarters (HQ) and counterparts from other countries to drive application and market expansion initiatives through thorough understanding of customers’ needs in global and Japanese markets
• Conduct in-depth analysis of market trends and competitive landscapes across global markets to formulate technical strategies tailored to diverse markets
• Deliver exemplary technical services to our global clientele, including Japanese customers and business partners for commercialization of polyolefin, polyethylene and other chemical products
• Devise and execute impactful marketing strategies, including innovative sustainable solutions, to elevate the company's brand and products presence and market value

Requirements:

• Bachelor’s Degree in Chemical Engineering/Polymer Science with 12 to 15 years relevant working experience
• In-depth knowledge in polymer and packaging industry related to m-LLDPE/HDPE/PP
• Proficient in Japanese language to liaise with counterparts from HQ in Japan
• Strong understanding of Japanese market and culture
• Highly self-motivated, meticulous, independent and resourceful
• Strong leadership and communication skills and an effective team player
• Effective customer orientation
• Able to travel within short notice when required

Job Description

Perform mechnical & piping design review, technical agreement review and other engineering related matters for new building and conversion projects

Job Requirements or Responsibilities

• To support project in addresings engineering issues involving designers and classifications.
• To perform TA review in accordance with the contractual requirement and review schedule.
• To conduct an integration meeting involving pertinent parties for the purpose of design integration.
• To scrutinize all drawings received from supplier and designers, and provide comment as per contractual requirements, rules & regulations and operational practice

Job Description:

- Prepare weekly reports on vehicle repair status.

- Assist in writing meeting minutes to track outstanding issues.

- Conduct team briefings before starting work.

- Coordinate and manage team assignments and vehicle parking allocation.

- Plan and monitor vehicle sequencing and status for operational tasks.

- Provide documentation support to the Operations Leader for work-related needs.

Job Requirements:

- Degree in Engineering (Mechanical, Electrical, Hydraulic, Automotive, Electrical & Electronics, Mechatronics) or a Diploma in a related field with 5 years of relevant industry experience.

- Strong team player.

- Ability to lead a team effectively.

1. Degree in Building/Construction Studies/Civil & Structural Engineering/Geological Science or equivalent

2. Ensure full adherence to company policies on-site, particularly health and safety standards

3. Able to manage and control workers and monitor their work closely

4. Attend project site meetings with the clients, consultants, sub-contractors, suppliers, authorities, etc. and to ensure the smooth progress of the project

5. Supervise the collection of soil and rock samples and instrument installation works

6. Prepare reports from fieldwork eg. Borelogs, installation records and daily journals

7. Co-ordinating with materials suppliers and managing the delivery, quality and installation of materials

• MEP Contractor
• Basic up to $5000
• Office hour 6 days
• Bus from MRT Pioneer

Job Responsibilities:

• Oversee quality checks for incoming, in-process, and outgoing products, ensuring adherence to inspection criteria, quality plans, and finishing work per method statements.
• Work with QA, Process, Engineering, and Product teams to address quality issues, perform audits, and implement corrective actions.
• Manage and control supplier quality standards, ensuring compliance with required specifications.
• Prepare inspection reports, coordinate site visits, and liaise with Project Managers, Engineers, and Authorities for certifications.
• Provide training to workers on method statements and ensure compliance with construction and quality standards.

Job Requirements:

• Minimum ITE, Diploma, or Degree in Manufacturing or Quality Engineering.
• Preferably at least 2 years of experience in a Product Manufacturing environment.
• Knowledge of ISO standards (9001, 14001, 13485, 45001) is a plus.
• Understanding of quality requirement of DMA Modular Prefab MEP product, Materials Selection, Fabrication, Assembly and Inspection will be an advantage.

For consideration, kindly submit your CV by clicking “APPLY NOW” or email to [email protected] for confidential discussion.

*Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R24124448 | Nana Yeoh Li Xuan

Addcel has been delivering deep value to clients across the Oil and Gas, Petrochemical, Energy, Pharmaceutical, Data Centers, Environmental Solutions and Infrastructure industries since 2010.

Specialising in Design & Building of utility systems, prefabrication/ DFMA works, facility & plant maintenance and construction implementation such as structural steel, piping, storage tanks & silos as well as the equipment installation, we take pride and passion in all that we do.

The Project Engineer reports to the Project Manager and is responsible for the below:

• Prepare and submit required documents for Project, working with respective stack holders based on project proposal.
• Prepare and maintain the project document summary.
• Upon confirmation of project resources, update other stakeholders to prepare submission and record for final MDR.
• Prepare and follow up with Engineering and drawing related documents.
• Receive, review, update and issue latest revised drawing to project team.
• Prepare and monitor STQ / RFI for technical details.
• Preparation and updating of project schedule.
• Prepare and update Regular reports and Project Forecast.
• Base on approved layout and schematic drawings, prepare and update MTO upon approval from client.
• Escalate any abnormalities compared to bidding quantity to PM and procurement team.
• Update the revised MTO (material take off) to project team, ensuring material availability as well as manpower resources.
• Attend daily toolbox meeting.
• Update Project managers about the progress, plans and challenges.
• Assist in the preparation of the complete subcontract Scope of Work.
• Work with all stakeholders to ensure that we have the latest equipment connection drawings.
• Prepare, monitor and update status to procurement, and submit monthly progress claim.
• Record additional works and variation orders.
• Prepare variation claim with proposal team.

To be a good fit, you would possess these qualities and skills

• Bachelor’s degree in Engineering or equivalent.
• Min. 3 - 5 years of relevant working experience, preferably managing projects for Semi-con, Pharma & Oil & Gas.
• Proficient knowledge in AutoCAD software & Microsoft Office.
• Able to work independently and as a team with good prioritization skills.
• Good time management.
• Good communication skills, both verbal and written.
• Enjoy challenging yourself in a fast pace environment.

Join us in adding value everyway and creating value everyday with pride and with passion!

Job Description

• Develop battery data analytics processes and visualizations for vehicle programs.
• Data management and retrieval using Spark, Hive, Hue, and Jupiter Notebooks.
• Data analysis using Python, MATLAB, and R.
• Data visualization with Power BI, Tableau, Matplotlib, and ggplot2.
• Collaborate with battery data analytics and engineering groups on algorithm design, results, modifications, production issues, data consumption methods, and lessons learned.
• Apply analytical methods to assemble insight from electric vehicle usage data. Use the appropriate statistical methods to make actionable inferences.
• Fit comp.
• lex models to multi-factor datasets using Python, MATLAB, R.
• Model and project the long-term trends of key electric vehicle metrics. Validate results.
• Apply statistical and machine learning models to understand battery production quality metrics.
• Contribute to analytics forums and cross-functional groups by sharing learning within and beyond Global Battery Engineering and Automotive Engineering for PSV operation.

Job Requirement

• Any qualification in Automotive/Electrical/Mechanical Engineering, Computer Science, Applied Mathematics, Statistics, or Data Analytics.
• Minimum technical knowledge of data analysis methods and success in solving complex problems.
• Proficiency using relevant tools. (Python, Spark, Hive, MATLAB, Power BI, R).
• Real-world experience using Hive to query Hadoop data file structures.
• Practical knowledge of machine learning and predictive methods.
• Ability to lead multiple projects and assignments with high level of autonomy and accountability for results.
• Knowledge of high voltage batteries and electrification subsystems.
• Electrochemistry background.
• Willingness to learn and quickly adjust to new tools and systems.
• Capable of converting ambiguous problem statements into concrete project requirements.
• Proven proficiency in statistical analysis techniques.
• Practical knowledge of machine learning and predictive methods.

· Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.

· Formulating project parameters and assigning responsibilities to the most capable employees and monitoring the project team.

· Interacting with clients, interpreting their needs and requirements, and representing them in the field.

· Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project's status.

· Cooperating and communicating with the project manager and other project participants and collaborating with senior engineers to create more efficient project methods and to maintain the project's profitability.

· Reviewing the engineering tasks and initiating the necessary corrective actions.

· Developing specifications for the project's needed equipment.

· Creating frameworks to measure the project's metrics and data collection.

· Establishing field test methods and methods for monitoring the quality of those tests.

· Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications.

Project Engineer Requirements:

· A Bachelor's degree in engineering or a related field.

· 3 or more years' field and project planning experience.

· Excellent computer literacy and knowledge of design and visualization software.

· The ability to work with multiple discipline projects.

· Excellent project management and supervision skills.

· Excellent organizational, time management, leadership, and decision-making skills.

· Strong written and verbal communication skills.

· Knowledge of applicable codes, policies, standards, and best practices.