As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and , efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

The Senior Mechanical Engineer is a leadership role within EOS Defence Systems (EOS DS) and is responsible for solving problems using disciplined engineering techniques (e.g. software, mechanical, electronics, system, testing etc) to enable development of baselined and software designs that support the product development and product goals of EOS DS.

The Senior Mechanical Engineer exercises in-depth engineering technical knowledge within or across specialist disciplines and the ability to enable strategic alignment. Adherence to governance and standards and mobilising people to achieve business outcomes with the appropriate levels of integrity, safety and ethics is critical to the role.

The Senior Mechanical Engineer exercises initiative and judgement in the interpretation and application of policy and procedures. The Senior Mechanical Engineer may lead a small team and are responsible for managing, developing and guiding staff to achieve their full potential. They provide a high level of support to their team, in consultation with senior leadership, suggest staffing and workflow priorities and monitor and manage performance, health and wellbeing.

Primary Duties:

Specific Functions & Tasks

• Lead and support a multi-disciplinary team to ensure the timely and professional delivery of project outcomes.
• Produce mechanical designs that enable and satisfy defined requirements in the specified time frames.
• Work with systems engineers to ensure that all requirements are identified, captured and analysed.
• Work with project engineers to ensure design solutions are delivered on time and on budget and meet identified requirements.
• Produce mechanical designs that satisfy defined requirements in the specified time frames.
• Develop, review, update, modify, and approve mechanical design plans and work schedules.
• Prepare and review all documentation required to support designs.
• Perform conceptual design, models and drawings of complex mechanical assemblies.
• Perform FEA of models.
• Document designs including calculations, design options and decisions.
• Conduct design reviews with the view to endorse mechanical design.
• Perform test, evaluation, characterisation, verification & validation of mechanical assembles in collaboration with Test Engineers.
• Prototype mechanical assemblies and systems.
• Work closely with other engineering disciplines to ensure cohesive and complete system designs.
• Apply DFX principles (manufacturability, testability, excellence).
• Outline and assign work, review work for technical accuracy and adequacy and provide guidance and mentorship the Mechanical Engineers.
• Adhere to and ensure understanding and compliance with company procedures to achieve a safe and secure work environment.
• Other duties as required.

Strategy and Architecture

• Contribute to and communicate strategy for emerging, new, and current technologies, products, services within Defence Systems and have authority over and accountable for the innovation and delivery practices required to assure the implementation of this strategy.
• Assess and enable a high level of leadership and deep industry, defence system knowledge, and systems engineering best practice to maintain competitive advantage, exploit EOS DS technologies and minimise exposure and risk.
• Communicate, advocate and influence stakeholders through effective negotiation and communication while fostering an environment of innovation, learning and continuous improvement within and outside the organisation.

Development and implementation of Engineering

• Self-initiated and managed under broad direction and governance to be responsible for demonstrably leading self and others to produce designs and products that satisfy defined requirements in the specified time frames and meet group objectives.
• Undertake cohesive best practice designs and analysis and develop efficient work practices to support product development activities and business outcomes.
• Champion the assessment and use of rigorous development and problem-solving methods to enable safe, secure, and reliable solutions to engineering problems.
• Lead and work collaboratively with engineers across functional teams to solve complex problems as a team and ensure all requirements are identified, captured, and analysed such that the design/product can be developed that satisfies the safety, quality, policy, legislative and design authority requirements.
• Undertake clear and pragmatic tests, evaluation and verification activities on integrated system designs and prototypes (including formal check points) to verify and provide recommendations for sign-off of all design requirements to the lead engineer and design authorities based on relevant legislative requirements, standards and contracts.
• Prepare and review all documentation required to support designs and provide tailored advice and recommendations to teams and decision makers.

Relationship and engagement

• Actively listen, share knowledge and experience, provide guidance and mentorship, and work collaboratively to mobilise teams across engineering and other relevant internal and external customers to deliver engineering and business outcomes.
• Work with Production Engineers and Technicians to enable and ensure the best design solutions are delivered to solve production problems and obtain business outcomes under the broad direction of the Chief Technology Officer.
• Enable EOS Executive, Project Managers, and Project Engineers to ensure design solutions are delivered on time and on budget and meet other project management requirements.
• Communicate insights and provide deep engineering judgement for progress and the advancement of sound engineering solutions.

Delivery and operation

• Guide the design and execution of user acceptance testing and other verification activities to provide recommendations to the Chief Technology Officer, Chief Engineers and other Design Authorities.
• Support production and review manufacturing and supplier requirements to meet specified timeframes, engineering standards, and business outcomes.

People and skills

Work in cross functional multidisciplinary teams to enable self and others to solve engineering problems and implement solutions

Key Attributes:

• Ethical Leader.
• Influencer.
• Deep Technical knowledge.
• Problem solver.
• Engineering judgement.
• Details oriented.
• Works Collaboratively.
• Insightful.
• Communicates well.
• Inventive.
• Solution orientated.
• Team builder.
• Uses experience for sound judgements

Responsibilities:

- Respond promptly to and handle customer requests and queries.

- Resolve incidents by troubleshooting system and network problems, diagnosing and resolving hardware/software issues, and analyzing system logs for potential issues.

- Fulfill change requests, service requests, and close problem tickets, including applying OS updates, patches, and configuration changes.

- Conduct preventive maintenance tasks and vulnerability assessments to ensure security compliance and system hardening.

Requirements:

- Bachelor’s degree in Computer Science, Information Technology, or related field.

- Preferred certifications: CCNA, CCNP, CCIE.

- 1-3 years of experience in network and security management.

- Have experience in supporting firewall and network equipment such as Cisco switches, Check Point, and Palo Alto Networks.

- Strong problem-solving skills and a proactive approach to information security.

- Ability to work independently and collaboratively in a team environment.

Position Overview:

The Principal Electronics Engineer is a senior leadership role within EOS Defence Systems (EOS DS) and is responsible for solving problems using disciplined engineering techniques (e.g., software, mechanical, electronics, system, testing, project etc) to assure and advise on the development and/or delivery of products. The Principal Electronics Engineer possess deep technical and industry knowledge with the ability to influence and guide company direction, ensuring strategic alignment. The Principal Electronics Engineer is also responsible for developing products and designs that support the product development and product goals of EOS DS.

The Principal Electronics Engineer will lead and mentor engineers, up to and including Senior Engineers. They may provide technical assistance to multiple teams and provide a high level of support to those teams. In consultation with senior leadership, suggest staffing and workflow priorities and monitor and manage performance, health and wellbeing.

The Principal Electronics Engineer will have extensive engineering experience across the product lifecycle in a Defence environment, allowing them to provide leadership across engineering teams and execute technical authority as allocated.

Primary Duties:

Specific Functions & Tasks

• Provide necessary guidance and direction to produce electronics designs and analysis that satisfy defined product development requirements in the specified time frames and exercise allocated technical authority.
• Work with systems engineers to ensure all requirements are identified, captured and analysed.
• Lead conceptual design and schematic capture of complex electronic circuits.
• Ensure test and evaluation activities on electronics and system designs are undertaken to verify and sign-off of all design requirements.
• Initiate and/or participate in planning on electronics designs.
• Develop, review and champion the electronics engineering process within EOS DS.
• Ensure the preparation and review of all documentation to support designs.
• Perform conceptual, preliminary and detailed design of complex electronics assemblies.
• Simulate analogue and digital circuits.
• Document designs including calculations, design options and decisions.
• Prepare for and contribute to design reviews.
• Perform test, evaluation, characterisation, verification & validation of electronic subsystems in collaboration with test engineers.
• Prototype electronic circuits, wiring harnesses and other systems.
• Work closely with other engineering disciplines to ensure cohesive and complete electronic designs are delivered on time and on budget and meet project requirements.
• Apply DFx principles (manufacturability, testability, excellence).
• Review work and provide guidance and mentorship to Senior Electronics Engineers.
• Engage key stakeholders and subject matter experts across technical engineering and specialty areas to understand the concept of operations and user needs to elicit and decompose electrical requirements.
• Adhere to and ensure understanding and compliance with company procedures to achieve a safe and secure work environment.
• Other duties as required.

Strategy and Architecture

• Contribute to and influence strategy for emerging, new, and current technologies, products, services within Defence Systems and have authority over and accountable for the innovation and delivery practices required to assure the implementation of this strategy.
• Assess and ensure a high level of leadership and deep industry, defence system knowledge and systems engineering best practice to maintain competitive advantage, exploit EOS DS technologies and minimise exposure and risk.
• Communicate, advocate and influence persuasively through effective negotiation and communication while fostering an environment of innovation, learning and continuous improvement within and outside the organisation.

Development and implementation of Engineering

• Self-initiated and managed under broad direction and governance to be responsible for demonstrably leading self and others to produce designs and products that satisfy defined requirements in the specified time frames and meet group objectives.
• Undertake cohesive best practice designs and analysis and develop efficient work practices to support product development activities and business outcomes.
• Lead and work collaboratively with engineers across functional teams to solve complex problems as a team and ensure all requirements are identified, captured, and analysed such that the design/product can be developed that satisfies the safety, quality, policy, legislative and design authority requirements.
• Undertake clear and pragmatic tests, evaluation, and verification activities on integrated system designs and prototypes to verify and provide recommendations for sign-off of all design/product requirements to the Chief Engineer and Design Authorities based on relevant legislative requirements, standards, and contracts.
• Prepare and review all documentation required to support designs and provide tailored advice and recommendations to teams and decision makers.

Relationship and engagement

• Actively listen, share knowledge and experience, provide guidance and mentorship, and work collaboratively to mobilise teams across engineering and other relevant internal and external customers to deliver engineering and business outcomes.
• Work with Production Engineers and Technicians to ensure the best design solutions are delivered to solve production problems and obtain business outcomes under the broad direction of the Chief Engineer.
• Support the leadership alongside with the EOS Executive, Project Managers, and Project Engineers to ensure design solutions are delivered on time and on budget and meet other project management requirements.
• Communicate insights and provide thorough engineering judgement for progress and the advancement of engineering solutions.
• Apply interdisciplinary, collaborative approach to requirements including analysis of functional and non-functional requirements and functional performance specifications to develop effective solutions.

Delivery and operation

• Guide the design and execution of user acceptance testing and other verification activities to provide recommendations to the Chief Engineer and other Design Authorities.
• Support production and review manufacturing and supplier requirements to meet specified timeframes, engineering standards, and business outcomes.

People and skills

Work in cross functional multidisciplinary teams to enable self and others to solve engineering problems and implement solutions.

Key Attributes:

• Ethical Leader.
• Influencer.
• Deep Technical knowledge.
• Problem solver.
• Engineering judgement.
• Details oriented.
• Works Collaboratively.
• Insightful.
• Communicates well.
• Inventive.
• Solution orientated.
• Team builder
• Uses experience for sound judgement

Electrical Project Engineer / Licensed Electrical Worker (LEW)
Working Hours: Monday-Friday [ 830am - 530pm ]
Address: 1 Bukit Batok Street 22, #04-01 GRP Building, Singapore 659592
Salary: $2,500-$4,000

Requirements:

• Degree in Electrical Engineering (Major in Power)
• Prefer with Class 3 driving license

Responsibilities:

• Preparation of technical specifications.
• Carry out site inspections on LT and HT installations per EMA requirements.
• Assist PE/ LEW to carry out switching of electrical panels.
• Standby and attend emergency call up services at customer installations.
• Prepare incident reports, technical proposals, etc.
• Site supervision of sub-contractors on maintenance works.

Cyber Security Engineer Job description

- To implement and deploy solutions like SIEM, EDR, and NMS:

o Splunk

o QRadar

o Carbon Black EDR

o SolarWinds NMS

o Other new onboarded products or solutions

- To manage and work/liaise with product vendors, partners, and customers in terms of schedule, expectation, and requirements

- To be able to research and stage test environment for project preparation

- To provide consistent and clear communication to external and internal stakeholders

- To provide informal training to partners and customers

Requirements:

- Diploma/Degree in Computer Engineering, Computer Science, Information Systems or equivalent

- Minimum 2 years of relevant work experience in IT security implementation and deployment

- Minimum 1 year of relevant work experience with relevant product deployment

- Good understanding of operating system technology, such as Unix, Linux, and Windows Server

- Good networking & scripting knowledge

- Technically inclined and hands-on

- Good interpersonal skills, independent, proactive and a team player

- Good communication, presentation, and writing skills

- Able to work independently

- Preferably from a System-Integrator or Distributor background

About the Role:

A team member of RRC (Regional Repair Center) and will be responsible to perform repair of medical endoscopes in RRC. He is also responsible to strictly adhered to the process, safety and quality standards required to repair medical equipment. He also has responsibility to maintain the proper condition of repair workbench as assigned.

Roles and responsibilities:

· Perform repair of medical endoscopes

· Carry out workshop maintenance task assignments

· Ensure compliance with GDPMDS requirements at all times

· Perform 5S in individual and scope repair areas at all times

· Any other duties as assigned

About Olympus:

Our purpose at Olympus is to make peoples’ lives healthier, safer and more fulfilling. We do this through innovation. As a technology pioneer, we design and deliver solutions across our Medical division that make a positive contribution to society.

Our products are used to capture the medical and diagnostic images of our world, from the microscopic to the endoscopic. They are instrumental in furthering research, and for travelling inside the human body to help diagnose, treat and prevent illness.

Our commitment to customers and our social responsibility is the cornerstone of everything we do.

Why work at Olympus?

At Olympus, we are dedicated to fostering a high-performing culture, a collaborative environment, and enabling everyone to shine. Our common values of Patient Focus, Integrity, Innovation, Impact and Empathy, form the foundation of our culture and guide our behaviour, where our people feel like they are making a difference every single day.

Not only will you benefit from a meaningful, rewarding and challenging career, you will have access to a range of benefits:

· A competitive salary package including AWS and Variable Bonus

· 18 days of annual leave in your first year

· Health and Wellbeing initiatives (Annual Medical Checkups, Flu Vaccinations, Dental benefits, and Employee Assistance Programs)

What we are looking for:

· Diploma or ITE in Engineering / Biomedical Engineering

· More than 3 years of Medical Equipment service provision

· Personality: Team Player, meticulous and organized

· Traits: Steady hands and keen eyes to handle delicate components

· Electrical & Mechanical soldering skills

· Require critical thinking and problem solving skills

· Good with Microsoft Office

Apply Now:

To submit your interest in this opportunity, select “Apply for this job”.

In the meantime, follow us on:

· LinkedIn - Olympus APAC

· Company website - www.olympus.com.sg

WHO YOU’LL WORK WITH

Apparel and Accessories Costing Team is a function of Apparel and Accessories Supply Chain, driving costing model that is transparent, fair and fully digital across apparel and accessories. The team provides predictability, scalability and benchmarking of Nike manufacturing costs that improves end to end margin planning, cost mitigation and sourcing decisions. This role reports to Director, Apparel/Acc Costing, N Asia based in Shanghai

WHO WE ARE LOOKING FOR

The ideal candidate should have relevant experience and knowledge in Apparel/Accessories industrial engineering, costing, product construction, or production management. Good in product complexity analysis, workflow study and data management skills. Have good communication in technical manufacturing concepts with other stakeholders. A self-starter with ability to work independently and meet deadlines. Willing to learn and with “can-do” attitude. And below qualifications:

• Diploma or above. Minimum of 2-year work experience
• Certificate of General Sewing Data (GSD) and relevant knowledge in SAM (Standard Allowed Minute) /SMV (Standard Minute Value) analysis.
• Able to communicate in verbal and written English. Mandarin is a plus.
• Computer skills: Microsoft Excel, Word, PowerPoint, and Outlook.

WHAT YOU’LL WORK ON

As a Cost Engineer, this role will work closely with ACE managers and directors in optimizing the cost models in Nike, creating SAM/SMV database, managing the product cost analysis from manufacturing perspective, and driving cost improvement with best practice sharing. She/He will closely collaborate with both Nike internal and external stakeholders including factory partners to understand, collect and analyze the cost-related information, and then align the standard and processes.

Core Responsibilities include:

• Product Cost Engineering Analysis

1. Assist the Director/IE (Industrial Engineer) managers to design and enhance the product cost review tools (e.g. Product Standard Minutes - SAM/SMV database, Cost Matrices & Calculators) for quick and accurate product cost assessment.
2. Analyze the product cost based on style constructions, factory cost structure and other related cost factors e.g. Manufacturing efficiency during product development.
3. Liaise with Factory Partners (mostly their costing or IE teams) in case of critical gap (e.g. in SAM/SMV or other related production process) vs their quotation. Support the product development to resolve the costing challenges from product perspective.

• Update Nike cost model

1. Collect, review and analyze manufacturing information from factories or market research (machines, workflow, output/efficiency…) for setting the reasonable and sustainable cost models.
2. Track and report cost drivers (e.g. SAM/SMV, Efficiency/Productivity) Study the impact and drive the review with the key functions including factory partners, Manufacturing Engineering team and Product creation team.

• Improve factory cost performance

1. Collect and analyze production data. Report the factory performance through scoring Manufacturing Index or other measurements.
2. Study and share the best practice to improve the cost performance of factories. Regularly review and update any related cost benchmarks.

Responsibilities

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Requirements

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Candidate must have min 6 years of relevant working experience in design engineering of ACMV / HVAC, Fire Protection and Plumbing services with Engineering Consultancies in Singapore
• Proven track record of working across organization boundaries to define requirements, solve complex problems and drive programs to successful completion
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)
• BIM and CAD capabilities (REVIT / Microstation / Autocad) will be added advantage

Responsibilities:

• Handles the technical aspects of patch deployment and system updates.
• Ensures that patches are tested, scheduled, and deployed with minimal disruption to system availability.
• Responsible for testing patches in a controlled environment before deploying them to production systems.
• Verify that patches do not introduce new issues or conflicts.
• Regular scanning and analysis.
• Scheduled and controlled patch deployment.
• Perform risk-based prioritization.
• Rigorous testing in a controlled environment.
• Collaborate with customer’s IT team for user acceptance testing.
• Emergency response for critical vulnerabilities.
• Understand the customer’s infrastructure and become familiar with the Customer’s infrastructure environment and support processes and procedures to ensure supporting customer with proper SLAs.
• Troubleshoot production issues to fix any user related issues and work with principal vendors and customer to provide the resolution within the proposed timelines.
• Be available for customers’ questions in assisting their needs to support any issues and monitor customer’s environment leveraging appropriate monitoring tools as well for special scheduled activities performed during non-business hours or public holidays due to system upgrades.

The Individual and their Experience:

• Linux OS patching
• MySQL system and patching knowledge
• MSSQL system and patching knowledge
• Maria DB system and patching knowledge
• Eagerness and willingness to pick up & adapt new skills and automation.

Our customers span across industries such as financial services, TMT (Telecommunications, Media and Technology), Education, Healthcare, Retail, Government, Manufacturing and Professional services. Our focus is to engage in the dynamics of our customers’ vertical markets and apply the skills of our employees in modernizing key digital pillars, Data centres and Cloud services, Security and Network Infrastructure, Workspace communications and collaboration, Data and information strategies, and IT operations modernization.

Logicalis Group has an annualized revenue of over $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4 billion.

Interested applicants please submit your application with your expected salary and notice period to be considered for the role.

We regret that only shortlisted candidates will be notified.

As part of any recruitment process, we collect and processes personal data relating to job applicants. We are committed to being transparent about how we collect and use that data and to meeting our data protection obligations. By applying to this post and sending us your resume, you agree to the collection, use and/or disclosure of your personal data in the manner as set out in our Data Protection Notice for Job Applicants which can be found

Logicalis is committed to protecting your privacy.

Click below to view the data protection notice.

https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf.

As a Supply Chain Management Associate in our company, you will:

Procurement & Vendor Management:

• Source and manage suppliers for components, products, and services in line with company requirements and the timely delivery of goods.
• Establish and maintain strong relationships with key suppliers and vendors.

Supply Chain Operations:

• Coordinate with internal departments (R&D, production, and finance) to align supply chain operations with business objectives.
• Ensure smooth logistics and transportation, working with external partners to manage the distribution and delivery of products.

Compliance & Risk Management:

• Ensure compliance with regulatory requirements and standards, especially in medical and consumer product categories.
• Identify potential supply chain risks and work on mitigation strategies.

Process Improvement:

• Evaluate existing supply chain processes and recommend improvements to enhance efficiency and cost savings.
• Implement best practices in supply chain management, ensuring alignment with the company’s goals.

Data Management & Reporting:

• Track key supply chain metrics and prepare regular reports for management review.
• Maintain accurate records of inventory, orders, and supplier details in the Auto-count and BLM system.
• Handle QMS system, not limited to SCM department.

Collaboration & Communication:

• Work closely with cross-functional teams, including R&D, finance, and production, to ensure alignment between supply chain activities and overall business objectives.

Serve as the point of contact for suppliers and external logistics providers.

Qualifications / Experience:

• Diploma or equivalent in supply chain/logistic preferred with at least 3 years of working experience in procurement, sourcing, logistics and supplier management.
• Previous experiences of working in a purchasing team; preferably within a medical or manufacturing environment.
• Good knowledge of purchasing, price negotiation, commercial understanding and cost breakdown.
• Experience of working closely with suppliers/freight forwarders.
• Able to add value, reduce costs and input to business improvements.
• Strong collaboration across departments.
• Computer literate, with advanced Excel skills/abilities.

The Job

• Gathering Feedback: Actively collect and analyze feedback from Driver-Partners to understand their needs and improve their experience.
• Code of Conduct Monitoring: Identify and report any Driver-Partners who violate our Code of Conduct (COC) to ensure a safe and respectful environment for all.
• Issue Escalation: Collaborate with the Partner Trust team to escalate issues and feedback, ensuring timely resolution and support.
• Partner Rewards: Implement and manage various campaigns to reward our Driver-Partners for their hard work and dedication.
• Educational Engagement: Conduct educational sessions focused on Safety and Quality to enhance the knowledge and skills of our Driver-Partners.
• Event Assistance: Support engagement events by performing ad hoc duties such as distributing goodies, packing items, and ensuring a positive experience for all participants.

The Talent

• Driving license Class 3 /3Awith min. 2 years’ experience
• Strong communication and interpersonal skills
• Ability to work collaboratively in a team environment
• Detail-oriented with strong organizational skills

Next Step

• Drop your resume and contact us to follow-up, or send your resume to [email protected]
• Email Topic: Driver Engagement
• Only shortlisted candidates will be contacted

Isaac Tan Yang En

EA Licence No: 91C2918

Personnel Registration No: R24123927

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and , efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Key Responsibilities:

• Partner with multidisciplinary teams to craft, build, and launch top-tier software applications, spanning mobile and web interfaces, as well as corresponding backend systems.
• Advocate for and implement industry-leading software development methodologies, including collaborative coding, peer review, and test-driven development.
• Spearhead technical forums, design system architectures, and coach team members to cultivate expertise and excellence.

Requirements:

• A minimum of 5 years of experience as a full-stack developer, with a demonstrated history of delivering high-performance, scalable solutions.
• In-depth knowledge of modern web development frameworks, including ReactJS, NextJS, TypeScript, and Kotlin/Java.
• Skilled in designing, implementing, and managing continuous integration and delivery pipelines, with expertise in deploying applications on cloud-based platforms such as AWS.
• Familiarity with database migration tools and techniques is a plus.
• Experience working in Agile/Scrum environments is also desirable.
• Excellent verbal and written communication skills, with the ability to clearly articulate complex technical concepts.
• A self-driven and proactive individual with a strong passion for innovation and continuous improvement.

We regret to share that only shortlisted candidates will be notified.

www.dadaconsultants.com

Data provided is for recruitment purposes only

EA Registration Number: R21102607

Business Registration Number: 201735941W

Licence Number: 18S9037

http://www.dadaconsultants.com/

—------------

EA License number : 20S0283

EA Personnel : R1332294

Job Description

• Undertake detailed design in one or more of the following field of expertise: Civil (drainage, sewage), Bridge/Tunnel, Underground Excavation and Tunnelling works
• Execution of projects and liaison with the Client, Client’s Consultants, Contractor, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Analysis on structural components using various engineering software

Requirements

• Degree in Civil and Structural Engineering or its equivalent
• Prefer degree recognized by the Professional Engineers Board of Singapore for Associate level
• Minimum 5 years relevant experience
• Good exposure in the analysis and design of geotechnical works, concrete structures, steel structures, civil works, or soil-structure interactions
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

Responsibilities

• Communicate and reconcile quality / technical matters to various stakeholders.
• Investigate supplier non-conformance, drive root cause analysis, discuss corrective actions and implement process improvement, including source inspection.
• Work with suppliers to ensure their manufacturing processes comply with customers’ expectations.
• Monitor non-conformance performance and collaborate with suppliers to drive continuous improvement in supplier’s quality.
• Maintain and improve product quality by completing product and compliance audits.
• Prepare and review monthly data to analyse quality issues.
• Process engineering changes (ECN).
• Maintain customer’s claims system.
• Maintain calibration process for Shimadzu’s equipment.
• Ad-hoc duties as assigned.

Requirements

• Diploma or degree in supply chain management, engineering or science.
• At least three years of experience in quality engineering or related role.
• Having experiences in mechanical engineering or related field will be advantageous.
• Possess good communication skills and able to articulate ideas succinctly to local and international stakeholders.
• Possess a good analytical mind, positive attitude and patience under challenging situations.
• Having a tenacious desire to solve challenging technical problems will be a distinct advantage.
• Possess a good organizational skill and a strong penchant for neatness.
• Possess a high level of proficiency in Microsoft Office and Microsoft 365.
• Able to work independently and a good team player.
• Possession of a Class 3 driving licence is preferred.

We regret that only shortlisted candidates will be contacted.

· To conduct inspections of and provide assistance to the workers deployed to ensure that the entire container trucking operations, including related wharf and yard operations, are closely monitored to achieve the safety and productivity standards and targets.

· Candidate must possess at least a Pass in PSLE English OR WPLN: Reading, Listening & Numeracy – Level 4

· ITE Skills certified course sponsorship.

· Able to work OT and Flexi Rotating Shifts.

· Full-Time Staff Benefits with High Remunerations.

• All other job enquiries are welcome including Wharf Operations Supervisor, Forklift (Medium) Operator, Container Trucking Specialist, and Lashing Specialist.

About Cynapse

Cynapse is an awarded AI Software Product company specializing in Enterprise-grade Vision AI in highly challenging environments. cynapse’s software platform is leveraging cutting-edge cloud/on-premise/edge platforms, advanced computer vision algorithms, advanced ML concepts & models, and more.

The company Headquarter is located in Singapore (one-north Area)

Job Description

Cynapse is looking for a talented and highly motivated Computer Vision & Machine Learning Developer to join our AI team that delivers a challenging, enterprise-scale Video Content Analytics solutions to global customers. You will conform to high standards of design and coding, working in a cutting-edge, dynamic and professionally challenging environment.

Responsibilities

• Assist in the development and training of computer vision models using state-of-the-art machine learning techniques.
• Work with large datasets for model training.
• Collaborate with engineers to implement and fine-tune models, focusing on performance, accuracy, and scalability.
• Contribute to the deployment and monitoring of trained models in production environments, ensuring robustness and reliability.
• Participate in the development and maintenance of MLOps pipelines, automating the process of model training, deployment, and monitoring.
• Conduct research to explore and implement the latest computer vision and MLOps techniques and technologies.
• Maintain and update model pipelines, ensuring they meet project requirements and deadlines.

Qualifications

• Bachelor’s degree in Computer Science, Data Science, Artificial intelligence, Mathematic, Electrical Engineering, or a related field.
• Solid understanding of machine learning concepts, particularly neural networks and their applications in computer vision (e.g., convolutional neural networks, transfer learning, and deep learning architectures).
• Proficient in one or more popular machine learning frameworks such as TensorFlow, PyTorch, or similar.
• Experienced with computer vision libraries like OpenCV, scikit-image, or equivalent.
• Strong programming skills in Python, with expertise in using tools like NumPy, Pandas, and Matplotlib for data manipulation and visualization.
• Knowledge of data preprocessing techniques, including image augmentation, normalization, and resizing.
• Basic understanding of MLOps practices, including version control, continuous integration, and continuous deployment (CI/CD).
• Strong analytical and problem-solving skills with attention to detail.
• Good communication skills, both written and verbal, with the ability to work collaboratively in a team environment.
• Eagerness to learn and adapt to new tools and technologies in the rapidly evolving fields of machine learning, computer vision, and MLOps.
• (Optional) Experience with cloud platforms like AWS, GCP, or Azure is a plus.
• (Optional) Knowledge of Docker or other containerization tools for model deployment.
• (Optional) Familiarity with MLOps tools like MLflow, Kubeflow, or similar is a plus.

Personal Competencies

• Innovative, motivated and a quick learner
• Ability to work well in a small team and take end-to-end ownership of problems and their resolution
• Attention to detail, curiosity, and passion for technology

Benefits

• Competitive base salary and a generous stock option package
• Unique opportunity to work with a talented global team on cutting edge technologies
• informal and exciting work environment with flexible hours

Due to the nature of the role, the position is considered for candidates that are only based in Singapore

Job Type: Full-time

Benefits:

• Health insurance

Schedule:

• Monday to Friday

Supplemental Pay:

• 13th month salary

Work Location: In person

COMPANY

At Peptobiotics we have built a new biotechnology product to replace the billions of dollars of antibiotics currently used in agriculture - enabling a productive, sustainable food system free from disease, and helping prevent the superbug crisis. We use genetically modified microbes to produce novel antimicrobial peptides. Our strain and bioprocess teams work together designing our product around straightforward scale-up and profitable unit economics.

OBJECTIVES

• Operation of bioreactor systems for submerged fermentation, downstream processing and sample analysis.
• Liaise with Chinese contract manufacturers for production at ~80kL scale and assist them in troubleshooting when required.
• Drive process optimisation by overseeing rigorous data collection, recording, and analysis. Use effect size analysis, DoE, etc to accelerate yield improvements and scale up.
• Preparation of SOPs for fermentation and downstream processing.
• Work with other team members to align molecular, bioproduction and veterinary research.
• Training and mentorship of junior team members.

REQUIREMENTS

ATTRIBUTES

• Experience with benchtop microbial bioreactor systems.
• Experience with yeast secreted protein production fermentation optimization preferred.
• PhD or Masters with work experience.
• Ideally has some experience or familiarity with downstream processing and analytical methods.
• Ideally has some experience or familiarity with industrial-scale fermentation.
• English and Chinese language working fluency are both required.
• Good communicator that enjoys working with and supporting others.
• Driven and takes initiative.
• Interested in entrepreneurship, biomanufacturing, synthetic biology, sustainability/agriculture,aquaculture, technology commercialisation and science with real world impact.

Job Description and Qualifications for a Engineer in the Petrochemical Industry

A Engineer in the petrochemical industry at Jurong Island plays a crucial role in overseeing engineering activities at the site. Here is a job description and qualifications typically required for this role:

Job Description:

1. Technical Oversight: Provide technical expertise and support, resolve drawing discrepancies & technical difficulties with technical team and ensure preparation of detailed method statements and work instructions for scheduled job are done. Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.

2. Project Management: Manage engineering projects, including planning, scheduling, and budgeting to ensure projects are completed on time and within budget.

3. Safety Compliance: Ensure strict adherence to safety regulations and protocols of the job site to maintain a safe working environment.

4. Quality Control: Oversee quality control procedures to maintain high standards of construction and operation.

5. Team Collaboration: Work closely with multidisciplinary teams, including chemical engineers, mechanical engineers, and technicians. Coordinates between sub-contractors/vendors/stakeholders and monitor site manpower / material / equipment demands to meet schedules. Liaise with the owners and consultants on the submission related to structural works, project, maintenance works, electrical works and Technical Department.

6. Problem Solving: Identify and troubleshoot engineering issues, offering effective solutions.

7. Documentation: Prepare technical reports, documentation, and progress reports.

8. Supervision: Monitor and supervise Engineers / foremen, ensure compliance to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.

• Full time supervision at site
• Able to communicate and team work
• Other Ad-Hoc related duties assigned by the company

Qualifications:

1. Education: A Bachelor's Degree in Engineering or a related field is typically required

2. Experience: 10 years of experience as a Engineer or similar job role in the electrical Engineering industry or Mechanical cum steel structural work and maintenace works.

3. Technical Skills: Technical expertise and knowledge in mechanical cum steel structural works , electrical , maintenance works , M& E engineering. Proficient in Microsoft Project and Good knowledge on method statements, Autocads drawing –piping isometric and etc

4. Communication Skills: Effective communication and teamwork are crucial for collaborating with various teams and stakeholders.

5. Project Management: Project management skills are valuable for overseeing engineering projects effectively.

6. Safety Awareness: A strong commitment to safety and the ability to ensure compliance with safety standards is essential.

• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team / department.
• Ensuring that the site works are completed with high quality standards and adhering to safety requirements throughout the project or maintenance works.

Job description:

As the RFFE Module design team leader, the candidate plays key design role in development and commercialization of MEMS Based RF-FE module for consumer electronics from new concept design, verification to mass production.

Candidates will designs develop, modifies, and evaluates electronic parts, components, or integrated circuitry for electronic equipment and other hardware systems on a multinational team basis.

Responsibilities:

- Co-working with international team including China and Singapore on a cross-disciplinary team basis

- Design and development of RF-FE modules to meet customer’s specification and needs

- Lead and produce 4G, 5G, WiFi module design, fulfil product lifecycle from engineering and transfer to production team

- Coordinate with engineering teams globally to produce module samples

Qualifications/Desired skills:

- Track record in commercialization of RF-FE modules.

- Broad understanding of RF analog component performance characterization via Smith Chart, tuning via passives, etc

- Extremely familiar with module application in RF application and have the ability to use advanced modelling techniques to design modules

- Strong skill in EM modelling and RF simulation tools Solid background in resonator/filter design, simulation, finite element analysis, layout, and package design

Nitto Denko Asia Technical (NAT) Centre was established in 2008 and backed by a 100-year-old Japanese corporation, Nitto Denko Corp. NAT is situated in Biopolis, heart of Singapore’s biomedical hub. NAT’s mission is to develop the Integrated Organic Optoelectronic for Biosensor Application. To achieve this mission, NAT is carrying out many concurrent research projects with top research institutions both locally and overseas.

Are you passionate about creating disruptive innovations that will shape the future of Southeast Asia’s emerging markets? We are seeking a visionary and entrepreneurial Business Development Strategist to lead our efforts in discovering, designing, and launching groundbreaking businesses across Southeast Asia. This is a newly created position.

As part of our fast-growing team, you will be responsible for identifying new business opportunities, leading market research, and collaborating with our talented engineering team to turn ideas into reality. This role offers the exciting opportunity to impact the region’s dynamic economies while playing a key role in the expansion of our company’s presence throughout Southeast Asia.

You will:

• Drive the end-to-end development of new business initiatives, from ideation to launch, with a focus on scalability across Southeast Asia.
• Conduct thorough market research, identify trends, and analyze opportunities within various industries across Southeast Asia, adapting strategies to different cultural and economic contexts.
• Collaborate closely with our engineering and product teams to develop innovative solutions that meet market needs and align with our overall business goals.
• Build strong business models, define the go-to-market strategy, and ensure successful execution and market penetration.
• Lead the validation process through testing prototypes and gathering customer feedback, iterating on ideas to ensure product-market fit.
• Establish partnerships with local stakeholders, investors, and key players across Southeast Asia to support business growth and regional expansion.
• Manage and track project performance, financials, and key metrics to ensure the business meets its targets and delivers impact across the region.

Skills/Qualifications:

• Experience: Proven experience in business development, new business creation, or entrepreneurship, particularly in Southeast Asia or similar emerging markets. Experience in tech startups or innovative industries is highly valued.
• Market Knowledge: Deep understanding of Southeast Asia’s economic, social, and business landscapes, with the ability to navigate diverse markets and adapt strategies accordingly.
• Analytical Skills: Strong analytical and problem-solving abilities, with experience in market research, competitor analysis, and data-driven decision-making.
• Innovation-Driven: Passion for innovation and the ability to translate complex ideas into actionable business strategies. Experience in product development or service design is a plus.
• Collaboration: Ability to work effectively with cross-functional teams, including engineers, product managers, and external partners. Strong communication and leadership skills are a must.
• Entrepreneurial Mindset: Self-starter who thrives in fast-paced, ambiguous environments. Willing to take ownership of projects and drive them forward with limited oversight.
• Cultural Sensitivity: Ability to work across different cultural contexts in Southeast Asia, building relationships and partnerships that respect local nuances.
• Languages: Fluency in English is required. Proficiency in regional languages (e.g., Japanese, Mandarin, Bahasa, Thai, or Vietnamese) is an advantage.
• Flexibility: Willingness to travel across Southeast Asia to meet partners, conduct market research, and oversee projects on-site.
• Internal alignment: Our HQ is in Japan. Internal alignment experience with Japanese company are needed
• Education: A bachelor’s degree in Business Administration, Economics or equivalent.

Job Responsibilities:

• Responsible for the architecture design and construction of the backend for social products and participating in technical planning.
• Responsible for the design of system software architecture, system modules, key components, and interfaces.
• Participate in writing core code, conduct project code reviews, continuously optimize code, and assist in resolving complex bugs.
• Adjust algorithm configurations in real-time based on business requirements.
• Participate in technical architecture reviews, ensuring high-quality technical designs.
• Guide, coordinate, and resolve technical issues that arise during the development process.

Job Requirements:

• Bachelor’s degree or above, majors in Computer Science, Software Engineering, or related fields.
• Minimum 5 years of experience in internet research and development, with experience in designing large-scale application systems. Experience in social product development is preferred.
• Proficient in microservices architecture and distributed architecture design, with experience in system development and optimization for high traffic, high availability, high fault tolerance, and high-load environments.
• Solid backend development skills, proficient in Java, with in-depth understanding and practical experience in data handling, performance optimization, concurrency, online system maintenance, and horizontal scaling.
• Familiar with Spring Cloud, Zookeeper, Redis, Kafka, Elasticsearch, and underlying architectures, including principles, cluster deployment, parameter optimization, and secondary development capabilities.
• Familiarity with recommendation technologies, algorithm engineering, and real-time estimation techniques is a plus.
• Strong communication, team collaboration, and project management skills, with the ability to work under pressure.
• A foundation in data analysis and a willingness to learn deeply, coupled with strong business acumen.
• Fluency in both English and Chinese for professional use.

Job Responsibilities:

• Responsible for the design, deployment, maintenance, and optimization of database systems, including installation, configuration, backup, and recovery.
• Monitor and optimize database performance to improve response speed and stability.
• Plan and expand database capacity to ensure scalability.
• Create and configure cloud servers, networks, storage, and other infrastructure on AWS to ensure a stable and reliable environment.
• Set up and manage monitoring tools to track AWS environment performance and operational status, proactively identifying and resolving potential issues to enhance system performance and reliability.
• Familiar with various AWS services and features, capable of selecting and configuring appropriate services based on business requirements.

Job Requirements:

• Bachelor's degree or higher in Computer Science, Software Engineering, or related fields.
• Minimum 3 years of database management experience, with familiarity with mainstream database systems such as Oracle, MySQL, and SQL Server.
• Proficient in database installation, configuration, maintenance, performance tuning, and troubleshooting.
• Solid knowledge of cloud computing and networking, with expertise in AWS services and architecture; previous experience managing AWS environments is required.
• Strong communication, team collaboration, and project management skills, with the ability to work under pressure.
• A foundation in data analysis and a willingness to learn deeply, coupled with strong business acumen.
• Fluency in both English and Chinese for professional use.

Job Summary

The Technical Superintendent is responsible for the overall technical management of the tugboat assigned to him/her, ensuring safe, efficient, and compliant operations. This role involves overseeing vessel maintenance, repairs, inspections, and managing the shipboard technical teams to ensure the tugboats are maintained to the highest standards. The Technical Superintendent will work closely with the Operations team, HSEQ Team and Crewing team, and external service providers to ensure the fleet operates efficiently and meets regulatory requirements.

Role and Responsibilities

• Ensure vessels comply with safety, environmental, maritime, and regulatory requirements, including class and flag state regulation & requirements. Oversee the daily operations of the tugboat fleet to ensure compliance with company standards.
• Supervise the planning and execution of regular maintenance, repairs, and dry-docking activities, while ensuring the vessels are always prepared for operational deployment.
• Provide technical support to the vessel during operational issues or breakdowns, troubleshooting and resolving any technical problems that arise in daily operations. Collaborate with crew members/Chief Engineers and contractors to quickly and effectively address equipment malfunctions or failures.
• Conduct regular audits and inspections to assess vessel condition and ensure timely certification. Promote a safety-first culture by maintaining safety standards.
• Develop and manage annual maintenance and repair budgets for the fleet.
• Prepare detailed maintenance plans and schedules, including the coordination of dry dockings and planned maintenance activities.
• Track and report on maintenance and repair costs, ensuring expenditure remains within budget.
• Provide technical training and development to crew members to ensure they are highly skilled and familiar with onboard systems. Assist and participate in drills and emergency exercises to ensure crew members are fully prepared for emergencies.
• Maintain accurate and up-to-date technical records for each vessel, including maintenance logs, inspections, and repairs, while preparing and submitting regular reports on fleet performance, technical issues, and maintenance status to management.
• Oversee all technical projects, including vessel retrofits, upgrades, and modifications, while coordinating the work of external contractors and suppliers involved in these projects.
• Carry out other duties assigned by the Management.

Job Requirements:

• Degree in Marine Engineering, Mechanical Engineering, Naval Architecture, STCW certification (Standards of Training, Certification, and Watchkeeping), or a related field. Preferably with COC2.
• Minimum 4-6 years of experience as a Technical Superintendent
• Occasional travel may be required
• Experience in technical management of tugboats is an advantage
• Relevant experience in electrical and automation systems
• Sea-going experience preferred