To assist Design for Safety Professional to carry out following duties:

• Recognise the importance of design for safety and health of a construction project to eliminate or mitigate such risks throughout the different life cycle of a building and structure
• Recognise, and advise stakeholders on, the duties and responsibilities of DfS Professionals in accordance with relevant legal requirements and WSH (DfS) Regulations
• Prepare for DfS review meetings in accordance with WSH (DfS) regulations
• Coordinate DfS review meetings for consideration of safety and health risks during different phases in the lifecycle of a building and structure
• Apply hazard identification tools and risk assessment for DfS review meetings in accordance with organisational procedures
• Establish types of safety and health records to be kept in the DfS Register in accordance with WSH(DfS) regulations
• Coordinate the flow of relevant information to stakeholders throughout the construction project
• Familiar with Design for Safety Guidelines of MOM
• Able to work with consultant team to carry out Design for Safety Review Meetings / Workshops in accordance to GUIDE 1, GUIDE 2 and GUIDE 3 according to MOM regulations
• Prepare and Maintain Design Risk Registers
• Prepare Design Risk Register documentation and handed over to relevant parties

JOB SCOPE & JOB RESPONSIBILITIES

• Design for single line diagram, electrical distribution system, small power, street lighting, compound lighting, ELV etc
• Determine the cable sizing & design routing for sub-main cabling and conduit/trunking wiring.
• Selection for cable, circuit breaker, transformers, UPS, VFD, generator.
• Supervise electrical Installation, testing and commissioning.
• Preparation of project documents including technical proposal, load list, cable schedule, cable routing, switch-room layout, load flow, etc.
• Prepare the BQ for the RFQ.
• Fault and short circuit study, harmonic analysis.
• Preparing specifications and datasheet for RFQ and review offers from vendors for compliance to technical specification, compliance with codes and regulation.
• Prepare documentation for submission and supporting project team on plant start-up, performance test, and optimization.
• Perform the cable sizing calculation and the voltage drop calculation.
• Supervise electrical Installation, testing and commissioning

JOB REQUIREMENT

• Bachelor's degree in Electrical & Electronic engineering.
• Minimum 3 years work experience in process plants or in the water/wastewater industry, with good knowledge in electrical desgin of water and/or wastewater treatment plants.
• Familiarity with AutoCAD, Navisworks.

Job Responsibilities:

• Manage Workers and site progress.
• Prepare Waterproofing Safety Risk Assessment (RA), Method of Statement (MOS), and Safe Work Procedure (SWP).
• Draw waterproofing sub-drawing using AutoCAD and MicroStation software.
• Ensure that the waterproofing procedures comply with specifications, quality standards, and requirements.
• Liaise with Authorities and Main-contractors.
• Take site measurements and prepare monthly progress claims and monthly progress reports.
• Ensuring Supervisors & Foremen meet client & regulatory work requirements.
• Ensure that works are carried out according to specifications, drawings, and programmes without compromising on quality and safety.
• Maintain project schedule by monitoring project progress, coordinating activities, and resolving problems.
• Maintain safe & clean working environment by enforcing rules & regulations.
• Lead a team of supervisors to ensure full-time supervision of works on site.

Job Requirements:

• Bachelor's Degree in Civil Engineering or equivalent
• BCSS Certificate
• Proficient in AutoCAD and MicroStation
• Knowledge of Waterproofing works & Technical
• Knowledge of working at Height
• Minimum 1-year experience in waterproofing works
• Applicants with LTA project experience will be an added advantage
• Good oral and written communication skills

JOB SCOPES

1. Develop detailed designs and specifications for HVAC systems, including air conditioning, heating, and ventilation systems.
2. Create and review blueprints, schematics, and system layout.
3. Select appropriate mechanical equipment and components based on system requirements and performance criteria.
4. Coordinate with other engineering disciplines, such as electrical and structural engineers, to ensure seamless system integration.
5. Oversee the installation of HVAC systems to ensure they are installed according to design specifications and industry standards.
6. Conduct system commissioning to verify that all components are functioning correctly and efficiently.
7. Troubleshoot and resolve mechanical issues in HVAC systems to minimize downtime and ensure reliable operation.
8. Design systems with a focus on energy efficiency and sustainability.
9. Evaluate and recommend energy-saving solutions and technologies to reduce operational costs and environmental impact.
10. Ensure that HVAC systems comply with local building codes, safety regulations, and industry standards.
11. Address any safety concerns related to the mechanical aspects of HVAC systems.
12. Manage HVAC projects from conception through to completion, including budget management, scheduling, and coordination with contractors and suppliers.
13. Monitor project progress and resolve any issues that arise during the implementation phase.
14. Communicate effectively with clients, project managers, and other stakeholders to understand their needs and provide technical support.
15. Provide training and documentation for system operation and maintenance.
16. Stay updated with the latest developments and technologies in HVAC systems.

- Propose alternative design to substitute tender design that is practical, liable, cost-saving and conforms to relevant building code of practice.

- Liaise with client, architect, consultant, and main contractor for any site issues to ensure timely project execution. To represent the Company at site meetings and other meetings as required.

- Responsible for site coordination workers and to make accurate, decisive, and prompt decisions relating to work matters. Feedback to management on site problems for corrective actions to be taken.

- To ensure details in subcontracts, purchase orders are accurate and meet with the project specifications in covering the full scope of work intended and required by the main contract.

- Efficient project management which includes project scheduling, lead, and co-ordinate the whole project team which include supervisors, foreman, workers and subcontractors.

- Source for more competitive costs in equipment and subcontractor costs to minimize project cost and capital utilization.

- Responsible for preparation, checking and submission of shop drawings before commencement of installation works and as-built drawings upon completion. The drawings shall provide for the openings through building structures for the passage of M & E services and shall ensure conformance to regulation and clients’ requirements.

- Submission of monthly progress claim to clients and monitoring of variation works, avoid wide differential in claim and payment amounts. To finalize project accounts and variation claims early for client’s verification and payment.

- To monitor the progress of work on site and recommend, if appropriate, the interim payment certification to supplier/subcontractors proposed by the designated Project Engineer.

- To access, recommend and recruit suitable subcontractors and work force to provide quality engineering services to our clients.

- To be readily involved in tender estimation, variation quotation and costing preparation and assist the project manager in the preparation of budgetary statement.

- Responsible for all correspondences with the clients, authorities, main-contractors, subcontractors, vendors, architects, consultants, etc.

- To be actively involved with quality management system of the company.

- Perform any other duties as assigned by higher management or superior.

Job Requirements:

- Degree or Diploma holder in Mechanical Engineering or equivalent.

- Have more than 3 years or dible experiences in ACMV system.

- Proficient in Microsoft Office, AutoCAD and BIM.

- Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment.

- Strong analytical and problem-solving skills, with the ability to identify and resolve complex issues.

We regret that only the shortlisted candidates will be notified

Responsibilities:-

• Ensure precast produced in accordance to shop drawings
• Update of precast production status
• Carry out checks between precast plants
• Ensure precast quality in accordance to specifications

Requirement

• Minimum 2-3 years’ experience in precast management as a supervisor /
• engineer
• Able to work independently with minimal supervision
• Applicants with Precast Concrete Construction Course certification will have an
• advantage

About Sleek

Through proprietary software and AI, along with a focus on customer delight, Sleek makes the back-office easy for micro SMEs.

We give Entrepreneurs time back to focus on what they love doing - growing their business and being with customers. With a surging number of Entrepreneurs globally, we are innovating in a highly lucrative space.

We operate 3 business segments:

Corporate Secretary: Automating the company incorporation, secretarial, filing, Nominee Director, mailroom and immigration processes via custom online robots and SleekSign.  We are the market leaders in Singapore with ~5% market share of all new business incorporations.

Accounting & Bookkeeping: Redefining what it means to do Accounting, Bookkeeping, Tax and Payroll thanks to our proprietary SleekBooks ledger, AI tools and exceptional customer service.

Business banking: Overcoming a key challenge for Entrepreneurs by offering digital banking services to new businesses.

Sleek launched in 2017 and now has around 15,000 customers across our offices in Singapore, Hong Kong, Australia and the UK.  We have around 450 staff with an intact startup mindset. 

We have achieved >70% compound annual growth in Revenue over the last 5 years and as a result have been recognised by The Financial Times, The Straits Times, Forbes and LinkedIn as one of the fastest growing companies in Asia. Backed by world-class investors, we are on track to be one of the few cash flow positive, tech-enabled unicorns based out of Singapore.

Sleek is also a proudly certified B Corp.  Since we started our journey in 2017, we’ve been committed to building Sleek as a force for good. In just over 5 years, we’ve joined a community of industry leaders like Patagonia, Ben & Jerry's, and P&G who are building an inclusive, equitable, and a regenerative economy. We have planted over 29,271 trees to reforest our ecosystem and saved 7 tons of paper from landfills by processing over 1.4M pages through SleekSign. We aim to be Carbon Neutral by 2030.

About the role

We are looking for a Principal Engineer that is excited about the below Mission and Outcomes over the next 6-12 months.

Mission: Work closely with product teams to translate our business vision into impactful technical solutions. Drive the alignment of product requirements with strategic goals, ensuring each feature not only meets user needs but also advances our core objectives. Be pivotal in bridging the gap between business aspirations and technical execution, tackling complex challenges, and setting the stage for an exceptional user experience. Shape the roadmap, influence design decisions, and empower our team to deliver innovative, high-quality solutions every day.

Outcomes: 

1. Limit issues on KYC through Onfido/Myinfo to <1% of all onboarded customers.
2. Halve support tickets related to KYC onboarding by way of implementing an intuitive KYC flow and updating SOP with stakeholders.
3. Ensure 100% of customers' identity is compliant and up-to-date in platform by automating regular due-diligence checks in line with risk profile.
4. Review implementation of compliance flows related to information collection and validations, such as change of particulars, KYC invitations, address validations, and shareholder acceptance, ensuring that all information is accurate and certified.

To do this, you will have a minimum of 8 years experience as Fullstack Software Engineer or Software Architect and you will most likely be located in Singapore.

We are looking for a highly skilled Fullstack Engineer with a strong blend of technical expertise and business acumen. The ideal candidate will possess:

1. A solid academic foundation, preferably from renowned universities.
2. Proven experience working with leading organizations, demonstrating success in high-performing teams.
3. Over 8 years of expertise in Fullstack Engineering, with in-depth knowledge of both front-end and back-end development.
4. A demonstrated ability to translate technical skills into product-driven outcomes, creating significant business impact.
   

Behavioural fit is also important at Sleek, and we will be looking for candidates that have a proven track record of embodying the below attributes in their recent roles:

Ownership: This shows reliability and helps build trust within the team. We move fast and need to know that everyone will see things through to completion and proactively help to get things back on track when challenges arise. Accountability is really important to us.

Humility: There is so much we don’t know. Humility allows for open-mindedness to feedback and a willingness to learn from others. It paves the way for collaboration and creates a positive work environment. It is a key ingredient of self awareness and emotional intelligence.

Structured Thinking: Our business is complex with many layers (many services, many countries, many cultures). Regardless of whether you’re more analytical or creative in nature, being able to show sound judgement is important to us. It ensures solutions are pragmatic and balance the needs of the organisation, team and customers.

Data driven: We are a data rich business with ~15,000 small customers.  Each decision we make can impact many more people than we realise - so it’s critical that we use sound data to support our strategies and review the success of our initiatives.

Can have tough conversations in a positive way: It’s not a matter of if, but when difficult interpersonal situations arise.  Disagreement, conflict and disappointment are a given in a fast moving business where people care about their work.  People that proactively have tough conversations with kindness build empathy, trust and great working relationships. 

Problem Solving: You’ll need to be able to think on your feet as this role requires you to identify, diagnose, and resolve production issues quickly, reducing downtime. You will leverage your strong infrastructure and development skills in post-incident reviews to find the underlying cause of failures and prevent future incidents.

User-centric: You understand the importance of system reliability and performance for both internal and external users and make sure users are heard before suggesting solutions. Our business relies on our platform availability and you need to be cognizant of your actions as it comes with great responsibility.

Humility and kindness: Humility is a core attribute we hire for, which means we have a culture of not taking ourselves too seriously and being able to laugh. Kindness is also incredibly important. We are committed to creating and nurturing a diverse and inclusive environment. 

Flexibility: You’ll be able to work from home 5 days per week. If you need to start early or start late to cater to your family or other needs, we don’t mind, so long as you get your work done and proactively communicate. You can also work fully remote from anywhere in the world for 1 month each year.

Financial benefits: We pay competitive market salaries and provide staff with generous paid time off and holiday schedules. Additionally, you’ll be able to access our S$1,200 pa flexi benefits scheme for home office equipment or health and fitness expenditure.  Certain staff at Sleek are also eligible for our employee share ownership plan and can share in the upside of our stellar growth trajectory as we work toward listing on a prominent stock exchange in the Asia Pacific region.

Personal growth: You’ll get a lot of responsibility and autonomy at Sleek - we move at a fast pace so you’ll be making decisions, making mistakes and learning. There’s also a range of internal and external facing training programmes we run. We’re also at the forefront of utilising AI in our space and are developing a regional centre of AI excellence. It is our intention that if you leave Sleek, you leave as a more well-rounded person and professional.

Job Description:

• Handle project planning, scheduling, monitoring and updating to meet project completion targets
• Perform site planning, coordination and inspection relating to the construction project so as to ensure that project completion timeline, requirements and budget are met
• Liaise with the BIM team to update the drawings or BIM Model with the latest information available timely
• Prepare as-built drawings or BIM Model and compile O&M Manual for submission
• To assist in project coordination and oversee of all Civil and Structural works on site and ensure all related activities are carried out as per drawings
• Review architectural & structural submission documents & submission drawings prior relevant authorities' submission
• Assist the Project team in site walk-down survey with other discipline engineers and Client representatives as required, in resolving technical issues until construction completion
• Liaise with internal and external parties for project management
• Any ad-hoc duties as assigned

Job Requirements:

• Minimum of 2 years’ HDB experience
• Recognized Degree in Civil Engineering, Project Management, Structural Engineering or equivalent approved by PEB, BOA or SISV
• Good knowledge of technical design and engineering, construction methodology and construction planning
• Good oral, written and inter-personal communications skills in dealing with individuals and groups at all levels
• Proficient in Microsoft Office, AutoCAD and knowledge of BIM
• Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment
• Obtain CONQUAS supervisor certificate will be added advantage

Mission:

- Develop Go to Market Strategies on the IDEC’s focused products for specific vertical markets in the APAC Region

- Meet the growth target of product group in the APAC

- Develop sales across APAC & Middle East as per assigned targets

- Assist distribution channel during customer visits to conduct design-in opportunity

- Regular visits to direct account/customers to maximize IDEC opportunities

- Generate NBO (New Business Opportunities)

- Maintain a strong level of relationship with Distributors & Direct Accounts

- Following the group's pricing and sales policies

- Provide timely and accurate weekly and monthly Sales report to the sales management

- Maintain and share competitive intelligence

- provide customers feedback, market trend and new product development ideas to the sales/product management

Main Tasks:

- Tracking product performance against target

- Provide go to market strategy and for successful penetration into the focused vertical markets, identifying suitable portfolio for specific vertical markets

- Sales management and mentoring of distributors in assigned territories to generate NBOs and achieve budget

- Periodic visits to the distributors to conduct business reviews and regular joint customer visits

- Raise and follow up special price enquiries, prepare quotations with objective to maximize margin

- Assist distributors during exhibitions both at Marcom level and physical presence during the event

- Finding new prospective distributors and customers when needed

- Analyzing feedback from various channels and proposal of actions to Management

- Collect and feedback any competition information

- Prepare and Manage Sales Forecast quarterly/yearly in conjunction with Company Business Plan

- Work with colleagues and managers to understand & promote Company strategy & objectives

- Presentation of periodic reports with activity analysis

- Any other reasonably duties define by direct manager

Key Performance Indicators:

- Achievement of company turnover objective

- Achievement of personal turnover objective

- Achievement of Product and Vertical market growth target

- Achievement of NBO generation & win (number to be defined)

Territory Focus: APAC and Middle East. Region to be defined (e.g. Singapore, Malaysia, Indonesia, Vietnam, Philippines, S. Korea, Australia)

Candidate Profile:

- Bachelor’s Degree in electrical engineering is preferred (not mandatory)

- Minimum of 4 years of experience in OEM or distribution sales, product management

- Experience working with multiple distribution channels

- Ability to translate customer requirements into workable solutions

- Strong oral and written communications skills

- Strong technical aptitude & the ability to understand & communicate technical information

- Strong organizational skills & the ability to coordinate multiple projects simultaneously

- Able to travel overseas as required

- Good attention to detail and strong follow-up skills

- Ability to analyse sales results, interpret data and prepare action plan accordingly

- Knowledge of Microsoft Word, Excel and PowerPoint

- Experience with Salesforce.com is a plus (not mandatory)

- Posess a driving licence and car is desired (not mandatory)

Attractive package based on fixed salary + Variable bonus based on KPI’s achievement + Local travel allowance + Telephone allowance.

Halo Microelectronics, a developer of Analog and Mixed Signal Integrated Circuits enabling energy-efficient smart systems is looking for experiences Analog Circuit Design Engineers to join the Singapore Design Team.

Responsibilities:

* Transistor level design of Analog circuits, simulation, evaluation and characterization, system verification.

* Circuits design includes reference, amplifiers, drivers, LDOs, switching regulators or other mixed signal circuits.

* Coordinate with Layout Engineer in layout/mask design.

* Coordinate with application and product engineer, testing engineer to bring the products to production successfully.

* Work with application engineer and FAE to solve customers technical issues.

Qualifications:

* Strong educational or industrial background in Analog Circuit Design.

* Experience with bipolar and CMOS IC design.

* Personal character and team building skills essential to enabling on-time delivery of devices.

* Ability to work independently

* Must demostrate good communication and interpersonal skills.

* Must be able to perform as a team member.

As a Salvage engineer, the world is your playground. You never know when or where a ship gets into trouble. That is why for a Salvage Engineer literally every day is different. It sounds like a cliché, but it is the reality. As a Salvage Engineer, you will have an adventurous job. When a ship is in distress, you will travel to the emergency scene with a multidisciplinary team. Once on-site, you work together with the team to repair the ship's plant and get the systems up and running again. It is vital to salvage the vessel as quickly as possible. As well as working on actual ship salvage operations.

Your responsibilities as a Salvage Engineer

• As part of the mobile team, provide support to the Salvage Master/Project Manager at site.
• When at base, assisting the technical manager and the operations manager in the selection of new salvage equipment and setting up the right maintenance procedures.
• Maintaining company owned salvage equipment.
• Sharing knowledge with other engineers about complex ship's systems.
• Advising the salvage inspector and superintendent about how to break into existing ship's systems in order to use them during the salvage operation.
• Producing reports about the actions taken to get systems operational again. As you can expect from a leading international maritime service company, you will work with state-of-the-art equipment.

Your qualities
To make your mark as a salvage engineer with SMIT Salvage, you will need a flexible approach; you never know when or where your next project will be. You adapt easily to working with different teams and you are fully proficient in English. Of course, you are happy to work irregular hours and to spend longer periods of time abroad. In addition, you have:

• A minimum degree in any field with experience sailing onboard ships.
• Worked for at least 5 years on modern (merchant) ships.
• Preferably experience with a range of different types of vessels and engine-room plants.
• Willingness to work on weekends and public holidays frequently, with OT and allowances compensated.

• PLC & HMI system design and develop applications that effectively accomplish objectives and needs
• Analyse and edit existing PLC applications to improve functionality
• Test & simulate PLC applications extensively to ensure they are error and bug free
• Liaise with customer/end-users to identify technical requirements and develop solutions
• Create and present application prototypes that align with requirements
• Problem solving and troubleshooting skill
• Identify and evaluate technology solution to fulfil system requirements
• Determine project constraints including estimated time and costs
• Perform maintenance, troubleshooting and calibration on machines & equipment.
• Other duties/activities as assigned by management

Computer Engineering Technical Skills

- Knowledge of operating systems

- Understand computer network and hardware

- Debugging and troubleshooting

- Strong written and verbal communication skills

- Interested and passion in robotics

Jobe Description

- Development and test new features for robotic systems

- Participate in the whole development cycle including design,

development and deployment

- Application of software product onto real-world industrial

environment

- Product fiscovery and evaluation of emerging technologies for robotic

use cases

• PLC & HMI system design and develop applications that effectively accomplish objectives and needs
• Analyse and edit existing PLC applications to improve functionality
• Test & simulate PLC applications extensively to ensure they are error and bug free
• Liaise with customer/end-users to identify technical requirements and develop solutions
• Create and present application prototypes that align with requirements
• Problem solving and troubleshooting skill
• Identify and evaluate technology solution to fulfil system requirements
• Determine project constraints including estimated time and costs
• Perform maintenance, troubleshooting and calibration on machines & equipment.
• Other duties/activities as assigned by management

We are seeking a skilled Civil Engineer to support the site project. The candidate will also supervise concreting operations and manage estimation of Bill of Quantities, project progress claims and earthwork supervision. Proficiency in AutoCad to review and make necessary adjustment to project

drawings.

Responsibilities:

• Install, configure, and maintain server operating systems (Windows/Linux/VMWare)
• Deploy, configure, manage, and troubleshoot the following software/hardware - Active Directory, Exchange Server & Exchange Online, VMware ESXi, SAN Storage & Backup
• Perform routine system administration duties
• Monitor servers and troubleshoot issues
• Provide additional support when necessary (eg. backup and storage functions)
• Perform proper documents for all processes
• Recommend solutions and ensure all IT issues have been corrected, and maintain records of work performed
• Provide technical support across the company, including Singapore, regional offices, and retail stores
• Provide technical support to server and network infrastructure and perform regular upgrades to ensure systems remain updated
• Troubleshoot system failures or bugs, and provide solutions to restore functionality
• Assist with any ad-hoc tasks as assigned

Requirements:

• Minimum Diploma in Computer Science, Information Technology, or a similar field
• At least 2-3 years of working experience in the related field
• Experience in configuring, monitoring, and troubleshooting systems
• Able to communicate effectively in both oral and written aspects
• Able to work independently and in a team
• Possesses analytical skills and works well in a fast-paced environment

Responsible to manage system development, implementation and support of EAI applications, including:

• Develops applications that effectively accomplish client objectives and user needs.

• Designs and writes code for applications and maintain applications databases.

• Analyzes and edits existing software applications to improve and optimize functionality, fix problems, and enable their use on new hardware platforms.

• Remodels and adapts applications as needed to optimize performance.

• Identifies specific client needs and preferences related to the application.

• Tests applications extensively to ensure they are error and bug-free.

• Installs applications and acts as technical advisor.

• Communicates with relevant internal technical stakeholders to obtain information on project limitations, performance requirements and interfaces.

• Consults with clients in the design phase to determine client needs.

• Produces software documentation following company/client software process and templates.

• Participates in software product review meetings and team meetings.

• Performs any other related task as required.

Key Requirement

• Bachelor's degree or equivalent in computer science or software engineering or related field.

• Seasoned Software Applications Engineering, Software Development experience, or related work experience.

• Seasoned experience with Programming Languages such as (but not limited to) ANSI C, C++, and Unix Korn Shell programming

• Seasoned experienced with Linux or Unix and Windows operating systems.

• Seasoned experience working with Oracle Tuxedo, IBM MQ Series.

• Experience in banking or financial industry

• Certification in various programming languages, for example (but not limited to) Java, Perl, Python, C++ preferred.

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry innovation research project where you will be part of the research team to develop a mobile app for visualising geospatial data.

Key Responsibilities

• Participate in and manage the research project with Principal Investigator (PI), Co-PI and the research team members to ensure all project deliverables are met.
• Undertake these responsibilities in the project:
  1. Implement code for improved cartographic algorithms and thematic map designs.
  2. Design human-subject experiments that test how the implemented map designs are used on electronic devices.
  3. Obtain approval for conducting experiments from the Institutional Review Board.
  4. Perform statistical analysis and report the results in the format of journal articles and conference contributions.
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaison with vendors/suppliers.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment.

Job Requirements

• Have relevant competence in the areas of mobile app development.
• Have programming experience in Python and JavaScript.
• Have a Ph.D. degree in computer science, statistics, geography or a closely related field from a regionally or internationally accredited institutions.
• Knowledge of experimental design and computational geometry will be advantageous.
• Knowledge of C++ and R is desirable.

Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever.

Micron's Assembly Package Technology Development team is looking for a motivated and experienced individual contributor for this position in Process Development team. A good candidate will be developing, configuring and optimizing Package Assembly processes (front end, bonding and back end) for Micron's memory from pathfinding through to NPI start up and certification side by side with Manufacturing teams. Assessing processes by knowledge and skills, taking measurements and interpreting data are everyday responsibilities and expectations for the successful candidate. Other deliverables in this job function are Assembly design rules development working side by side with Design teams (Globally) and you will be involved in the design approvals (Substrate and Silicon), running, testing and upgrading systems and processes, approving the materials, process and equipment changes in the CCB (change control board). An important topic is the path finding of innovative package technology: Deep fundamental understanding of the key risks in Bumping, Flip chip and HBM technologies. Actual experience with TCB (Thermal Compression Bonding), CMP (Chemical Mechanical Polish), WSS (Wafer Support System), photo process and Ball Mount is a plus. Finally, the hands-on integration experience in Package Assembly and Wafer Level package process are needed, may need to conduct the supplier interactions/meetings and drive new NDAs with new projects, which all together requires a significant understanding of the processes, first principles and process control systems.

Requirements

• Bachelor’s or Master’s degree in Electrical Engineering, Materials Science, Physics, or related field.
• Minimum of 3 years of experience in semiconductor manufacturing or related fields.
• Proven track record in yield management and driving yield improvement initiatives.
• Deep understanding of semiconductor manufacturing processes, yield analysis, and statistical process control (SPC).
• Hands-on experience with data analysis tools such as JMP, or equivalent.
• Strong communication skills, and able to present complex technical data and trends to leadership and non-technical audiences.
• Proven ability to work with multi-functional teams and influence partners to achieve strategic goals.
• Problem-Solving Skills: Strong analytical skills with the ability to troubleshoot and resolve complex technical issues in a high-pressure environment.
• Project Management: Ability to manage numerous projects simultaneously and prioritize tasks in a fast-paced environment.
• Cross-Cultural Communication: Experience working with teams across different geographies and cultures.

Performs hardware, software, semiconductor design or telecomm engineering assignments. This job mapping should be used only if the position cannot be mapped specifically to other design/development engineering jobs.

Key Accountabilities

• Technical support to Group sales affiliates in the region for product groups such as control products, IAQ products and air conditioning installation material products
• Perform as the technical supporting desk
• Support the installation and commissioning for each job site
• Create demo kits for assigned product for regional promotion
• Support the marketing department to give the technical advice for the sales promotion enhancement
• Analyse and test product failures for better quality achievement
• Any adhoc duties as assigned by superior

Requirements

• Degree in Electrical/Electronic/Mechanical Engineering, or relevant
• Experience in air-conditioning or electrical industry will be an advantage
• Proactive and influential personality with ability to persuade and drive decisions
• Good to have PC programming and drafting skills
• Willing to travel with APEC regions

We are seeking a dynamic Junior Data Engineer to join our Regional Data team to help foodpanda make smart, data-driven business decisions. We maintain data ingestion pipelines while creating and maintaining products and frameworks to empower teams to craft insights and build quality data products.

Responsibilities

• Architecting, defining, and building data pipelines to enable faster, better, data-informed decision-making.
• Ingesting first and third-party data sources into our petabyte-sized data warehouse.
• Curating and maintaining high-quality data assets so our data scientists and analysts can make informed decisions and create better products.
• Creating and maintaining tools that enable data consumers to use our data better.
• Collaborating with cross-functional teams to deliver high-quality data assets.

Office Location : Tai Seng

Working hours : Monday to Friday | 8am to 6pm | Saturday 8am to 12pm

Salary (commensurate with experience) : Up to $5,000 + Variable Bonus + Annual Leaves + Medical Benefits

Industry : Construction Sector - A&A / Building Works

Job Description

•Check and analysis drawings, authority requirements and tender specifications

•Check site installation whether it is in accordance to design and standards

•Oversee the projects, ensure compliance of contracts and the drawings with regulatory specifications.

•Able to coordinate with owners, architects, consultants, project managers, sub-contractors and suppliers.

•Attend meetings with architects and consultants

•Other ad-hoc duties as assigned

Job Requirements: Possess at least diploma in Electrical Engineering and Mechanical Engineering (M&E) or equivalent

•However, entry level are encouraged to apply, from recognized University by Singapore PE Board as training will be provided.

•Good operational planning for construction projects

•Good in communication and written abilities

•Required skill: Able to use Microsoft Project to present schedule to the client

•Knowledge in Construction and Renovation.

•Skills required: Autocad

Maxhunt Resource Pte Ltd | EA Licence: 22C1322
Loh Wing Sheng | Registration No: R22110239

My client is a leading consulting company in the Lifesciences industry and works with big pharma players in the market for different engineering projects. Being in the consultancy business for over 10 years, one of the area they truly invest in is training and growing your career development.

My client believes in digital transformation and will be looking to hire talents with the following diciplines

Computer System Validation CSV Engineer

- Perform risk assessment and validation on CSV systems

- Execute validation protocols (IQ, OQ, PQ) and prepare detailed documentation

Laboratory Instruments/ Equipment Engineer

- Execute qualification protocols for lab equipments (HPLC, GC)

- Troubleshoot and resolve issues with lab equipments

CQV (Commissioning, Qualification and Validation)

- Manage and optimise HVAC systems, utilities and overall facilities infrastructure

- Oversee any facility upgrades and maintenance schedules

To be successful you should have

- Degree in Engineering/ Lifesciences or a related discipline

- Proven experience of at least 2 years in this filed

- Familiar with industry standards, regulations such as GxP, ISO, FDA, EMA)

Interested applicants, please send your profile to [email protected]

Gina Yeo

Life Sciences Consultant/ Head

CEI: R1660520 | Licence No: 19C9622 |

Job Position:- Resident Engineer (C&S)

Working hours

Mon - Fri (08.00 am to 5.00 pm)

Sat - (08.00 am - 12.00 pm)

Education & Qualification

• Degree in Civil or Structural Engineering or equivalent.
• Registered as Resident Engineer with BCA/IES/ACES.
• 3 to 10 years of relevant site supervision experience as a resident engineer.

Skills And Knowledge

• Strong technical knowledge to review design details and method statements.
• Ability to resolve site issues during construction.
• Familiarity with local building codes, regulations, and authority requirements.
• Completion of at least one safety course and ability to identify potential safety infringements.
• Ability to manage a team of Site Supervisors (for Senior Resident Engineer, Resident Engineer, and Resident Architect roles).
• Administrative skills to maintain discipline and manage personnel records.
• Good communication and interpersonal skills to work effectively as a team player.
• Diligent, methodical, and meticulous.
• Willingness to work overtime and adapt to digitalization efforts in projects.
• Keen learner and supportive of new technologies in the built environment.

Job Position:- Resident Engineer (M&E)

Working hours

Mon - Fri (08.00 am to 5.00 pm)

Sat - (08.00 am - 12.00 pm)

Education & Qualification

• Degree in Mechanical or Electrical Engineering or equivalent.
• Possess at least 8 years of relevant and practical experience on site;

Skills And Knowledge

• Strong technical knowledge to review design details and method statements.
• Ability to resolve site issues during construction.
• Familiarity with local mechanical & electrical codes, regulations, and authority requirements.
• Completion of at least one safety course and ability to identify potential safety infringements.
• Ability to manage a team of Site Supervisors (for Senior Resident Engineer, Resident Engineer, and Resident Architect roles).
• Administrative skills to maintain discipline and manage personnel records.
• Good communication and interpersonal skills to work effectively as a team player.
• Diligent, methodical, and meticulous.
• Willingness to work overtime and adapt to digitalization efforts in projects.
• Keen learner and supportive of new technologies in the built environment.