Responsibilities:

• To provide engineering support to the Project team from validation phase to project implementation

• To identify type of material and equipment requirement during validation phase.

• To involve in preparation and submission of engineering submittals.

• Programming of devices & creating and programming graphics in accordance with the project requirement.

• To assist in Test and Commissioning of system equipment.

• To assist in preparation and submission of operation and Maintenance Manuals.

• To provide Bill of Quantity for the projects.

• Any other duties as assigned by superior

• Ensure all works carried out in accordance with the specified quality and EHS standards

Requirements:

• Diploma/ Degree in Engineering or Building Control in relevant field

• Min 1-2 years of relevant work experience

• Experience in PLC programming is added advantage

• Experience in handling energy management systems/ HVAC systems/ Chiller Plant systems/ Building Management Systems will be a plus

• Knowledge of IT networking and database programming, Function Block programming, Structured Language Programming or HTML5 programming will be of added advantage

• Knowledge of industrial system protocols like BACnet, Modbus, LONTalk

• Strong customer management and problem solving skills

• Able to work with the team and self-motivated

Responsibilities:

• Coordinating and leading design consultants.
• Supervising design consultants and design engineers.
• Reviewing outcomes of design consultants.
• Assessing the risk of geological hazards and ensuring any factors affecting engineering works are identified and managed.
• Preparing reports for management to check design progress and identify risks.

Requirements:

• Minimum of 10 years of geotechnical engineering experience.
• With a Bachelor degree in Civil Engineering recognized by the PE Board, or a qualification acceptable to the Commissioner of Building Control as eligible for application as a Resident Engineer. Alternatively, a recognized degree in the relevant field subject to the acceptance of the Engineer.
• More than 5 years of experience in Design and working on LTA projects.

Responsibilities:

• Coordinating and leading design consultants.
• Supervising design consultants and design engineers.
• Reviewing outcomes of design consultants.
• Assessing the risk of geological hazards and ensuring any factors affecting engineering works are identified and managed.
• Preparing reports for management to check design progress and identify risks.

Requirements:

• Minimum of 10 years of geotechnical engineering experience.
• With a Bachelor degree in Civil Engineering recognized by the PE Board, or a qualification acceptable to the Commissioner of Building Control as eligible for application as a Resident Engineer. Alternatively, a recognized degree in the relevant field subject to the acceptance of the Engineer.
• More than 5 years of experience in Design and working on LTA projects.

Responsibilities

· Responsible for providing preventive maintenance service for BMS (Building Management System)

· Carry out troubling shooting, analyzing and rectification of the system on time

· Support client with system operation and recommendation for improvement

· Data analyzing and determination of the system operation status

· Response client’s request and attend the issue in short notice

· Supervise subcontractor to carry out the work safely

· Provide the assistance to colleague and mentoring actively

· Ensure all works carried out in accordance with the specified quality and EHS standards

· Prepare and submit quotations, including material, labor, and scope of works

· Perform replacement/repair, fit out works/A&A for existing BMS site

· Perform weekly standby on rotation schedule

· Perform calibration and verification of BMS sensors annually

· Provide sales support BMS service and site survey

Requirements

· Diploma/ Degree from a recognized technical institute

· Hands on experience in BMS Control System

· Hands on experience in programming languages and logic gates

· Familiar with digital fundamental

· Knowledge on basic networking

· Strong customer management & problem solving skills

· Excellent communication & presentation skills

· Skilled in the use of MS office

· Knowledge on ACMV system

Main Responsibilities:

• Infrastructure Management: Administer servers, storage systems, hypervisors, and network equipment such as switches, firewalls and wireless access points.
• Network Administration: Manage network infrastructure, including routing protocols, DNS, Active Directory, and GPO. To also maintain current VPN connectivity.
• Technical Support: Provide Tier-2/Tier-3 in-person or remote support for escalated issues and troubleshoot hardware, software, and network incidents.
• Collaboration Tools & AV Support: Ensure smooth operation of Microsoft Teams, video conferencing, and meeting equipment.
• User Training: Conduct training and knowledge transfer for end-users on deployed systems, focusing on Microsoft 365 services.
• Peripheral Management: Oversee IP phones, printers, display TVs, CCTV systems, and door access, collaborating with vendors as needed.
• Cybersecurity: Support basic cybersecurity measures and compliance with IT policies.
• Project Support: Participate and/or take ownership in IT upgrades, deployments, and other technical initiatives.

Job requirements:

• Bachelor's Degree in IT / Computer Science / relevant field or higher, certifications in CCNA, VMware VCP, or Microsoft Certified: Azure Administrator is a plus.
• At least 5 years in IT infrastructure, with hands-on expertise in network protocols, virtualization practices, and Microsoft 365 administration and configuration.
• Proficiency in Active Directory, DNS, GPO, SQL Server, and backup solutions (e.g., Druva). Knowledgeable in networking topologies, protocols and methodologies and cybersecurity concepts will be an advantage.
• Excellent Problem-solving skills, good communication skills and fluent in common language, and teamwork ability.

Project Location: A&A work (South)

Includes night shift work

Job Description:

• Manage a team of technical supervisors on site to ensure that all site activities comply with the regulations and client's requirements.
• Report to C&S QP, works closely with the regulatory authorities and contractors to provide supervision on site, resolve all site issues and ensure timely completion of the projects.
• To be competent in carrying out supervision of structural works by identifying any non-conformity of contractor's works on site. The appointed person must have the strong ability to interpret the drawings and contract documents on works to be carried.
• Appointed person possesses a complete understanding of local requirements especially to comply with BCA's criteria for build-ability and safety assurance system.
• Carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM.
• Manage the site supervisors with respect to C&S engineering works, architectural and M&E engineering works.
• Implement and sustain the site supervision quality & safety assurance system
• Ensure that proper site documentation for on-going works, site meetings, safety records, method statements, shopdrawings, as built submissions, etc are well managed.
• To attend site progress, technical, client-consultant, variation and coordination meetings
• Interpret drawings and contract documents on works to be carried
• Any other task assigned from time to time.
• Estimated commencement of work in February 2025.

Requirements:

• Recognized Degree in Civil/Structural Engineering acceptable for registration with the PE Board, Singapore
• Accredited with IES/ACES with a valid Resident Engineer Practicing Certificate
• Minimum 8 years’ C&S work experience with strong knowledge in construction of building structures.
• Knowledge in BIM and VDC capabilities will have an added advantage.
• A good team player with effective communication skills and able to interact with people at all levels.
• Preferably with experiences in additions and alterations of buildings/Commercial Developments.
• Preferably conversant with local codes and familiar with local authority’s regulations and requirements
• Good supervisory and leadership skills, with experience in leading a team of Resident Technical Officers

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application

Job Description:

• Ensure incoming equipment meet the purchase specifications
• Arrange for protection and maintenance of equipment and system
• Review the commissioning work processes to enhance efficiency and productivity
• Review the commissioning work processes to enhance efficiency and productivity
• Coordinate with all sections for testing / commissioning requirements with different stakeholders and arrange for facilities and instruments for the job

Job Requirement:

• Degree/ Diploma in Naval Architecture/ Civil/ Marine & Offshore/ Mechanical / Electrical / Chemical Engineering / Certificate of Competency (Marine Engineer Officer) Class 1 (Motorship), or its equivalent
• At least 4 years of relevant experience for Engineer position, and 6 years of relevant experience for Senior Engineer position
• At least 4 years of relevant experience for Engineer position, and 6 years of relevant experience for Senior Engineer position.

Working hours & locations:

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon to Thurs: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte Ltd and our group of companies, shall be used for the purposes of evaluation and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals.

Purpose:

• To manage logistic activities within QC department

Key Responsibilities:

• Performs receipt and storage of sample in accordance to local procedure.
• Performs routine and non-routine sampling of raw materials and utilities with observation of GMP requirements
• Ensures proper packaging of samples and correct samples are shipped to offsite recipient timely
• Ensures a good inventory of QC materials (purchased and prepared materials/glassware) to support testings; ensures no over surplus of inventory
• Ensures wastes are disposed appropriately and promptly.
• Practices 6S and ensures good housekeeping of laboratory, work area and equipments.
• Supports equipment calibration and maintenance, performs autoclave requalification and washing machine verification
• Performs peer review for verification of task and data.
• Participates in laboratory investigation (when required) and assist in the timely closure investigations, CAPAs.
• Ensures proper archival of submitted document for easy retrieval
• Identifies and reports problems in QC to supervisor in a timely manner.
• Adheres to all safety and security policies and practises
• Manages ad-hoc support tasks
• Assist QC support manager in the management and operations of the team
• Scheduling day-to-day shopfloor activities and resources handling to ensure timely sample and material management Provides training to the team
• Provide guidance, support, and technical expertise to the team Involves in investigation and protocol and report writing (when required).
• Involves in SOP writing and updating.
• Organization and Management Responsibilities
• Creates strong team morale and a culture of accountability and ownership
• Provides leadership, guidance and technical expertise/support to the juniors
• Ensures continuous improvements of the QC operations
• Ensures expenditures are within budget

Skills:

Professional

• For QC Support Technologist - Fresh graduate of NITEC, Diploma in Science (or equivalent)
• For Senior QC Support Technologist Graduate of NITEC, Diploma in Science (or equivalent) with at least 4 years of experience/Degree holder with at least 2 years of working experience.
• For Lead QC Support Technologist Graduate of NITEC, Diploma in Science (or equivalent) with at least 8 years of experience/Degree holder with at least 4 years of working experience.

Technical

• Competent technical skills in good laboratory knowledge and hands on experience in inventory management
• Knowledge of cGLP & cGMP

Business

• For QC Support Technologist, Senior QC Support Technologist 1, 2
• Basic report writing skills (preferably with legible hanwriting)
• Basic planning and organizing skills (for individual time management and work planning) Good interpersonal skills
• Team player
• For Senior QC Support Technologist 3 and Lead
• Effective report writing skills
• Planning and organizing skills (for individual time management and work planning)
• Leadership and problem solving with analytical and logical thinking

Competencies:

• Effective report writing skills
• Planning and organization skills
• Able to work independently
• Team player
• Analytical skills with logical thinking

​​

Where will I be based?

You will be based at one of our manufacturing site in Singapore near Tuas.

• Design and building of infrastructure/ Water plant / building engineering works (Civil / Structural)
• Conducting technical feasibility study, life cycle study and planning for building engineering.
• Preparation of design report, calculation, drawings, specification, cost estimation and details / schedules for projects.
• Assist Project Manager in up-keeping the project ISO quality documentation and records.
• Evaluation of tenders and preparation of tender assessment reports.
• Assist Professional Engineer in liaison preparation and follow up of authority submission.

Requirements:

• Bachelor Degree / Diploma in Civil / Mechanical / Electrical Engineering
• Minimum 5 years hands-on design experience in building and/or infrastructure projects
• Good project management and technical skills
• Familiar with local code and authority submission procedures
• Team player and able to work independent with minimal supervision
• Proficient in AutoCAD and BIM
• Good communication skills; ability to work well in a team
• Must hold valid Singapore License

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Responsibilities:

• Tracks and report daily work progress to the Yard Manager
• Ensures that the repair, conversion and construction jobs defined in the Specifications to be performed are carried out in accordance to the budget and schedule set by the Project Manager.
• Appoints approved subcontractors in consultation with Subcontracts Dept and Yard Manager and authorize purchase of equipment, spares and materials
• Ensures that records of work done are copied to the billing and project manager for their follow-up actions
• Responds to customer complaints and take corrective and preventive actions on errors of staff, subcontractors and suppliers
• Implements and maintain the Safety Management and Quality Management Systems.
• Communicate progress, highlights, and prioritizes between Hull Shop and Hull Afloat.
• Carries out special project documentation and case studies including work methods improvements.
• Ensures the safety of personnel through compliance with Occupational Safety and Health and Environmental Regulations.
• Ensures that Health, Safety & Environmental operating procedures are followed and counsel employees about compliance as necessary.

Requirements:

• Diploma or Degree in Marine Engineering/ or related engineering disciplines
• At least 4 years of relevant working experience in FPSO EPC projects
• Ability to read and interpret technical blueprint, plan tools/ equipment/ material take off, prepare project schedule, and input manpower loading
• Willing to go on overseas assignment (2 - 3 months)
• Understands the yard’s various functional systems, ship repair knowledge and related commercial matters.
• Good Degree of planning, organisation, control, problem-solving, decision-making, interpersonal, communication and people management skills required.
• Good knowledge in standards and class requirements on various works in ship repair industry.
• Good knowledge on safety requirements and standards for various works carried out in the yard.
• Possess skill to assess the cost and time required for the additional works.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Summary

The Business Support Executive is responsible to provide high-quality customer support through processing orders to shipment and delivery of orders. The Executive is also responsible for managing external customers and factories, coordinating with internal colleagues. This role also involves answering calls or emails from customers, participating in meetings with the factories and Sales.

Responsibilities

• Attend to pre-sales enquiries on product availability, lead time and price.
• Initiate and follow up on new item creation/customer creation in the system.
• Customer PO and contract review, including but not limited to the price and cost analysis, contract clause, and credit.
• Ensure price and credit have been approved before entering the ERP system.
• PO operation based on the sales order demand, track with vendors not only the inter-company vendor but the 3rd party about the schedule to meet customer’s demand.
• Daily order tracking & updating to ensure project schedule is under control.
• The shipment arrangement includes getting items from vendor and schedule pickup from customer.
• Follow-up on payment and forwarder details with customers and the factory.
• Review LC draft, prepare and collate documents from various factories for LC presentation.
• Coordinate with related parties on product quality issues.
• Communicate and provide timely responses between customer, sales, operation and factory.
• Generate and update sales order backlog reports to the sales & customer for update.
• Weekly & monthly sales & order forecast collection and summary.
• Support request from management e on reports from management’s request.
• Support manager to monitor the execution process of commercial contracts to conform to the company compliance & policy.
• Any other tasks assigned by manager.

Requirements

• Minimum Diploma or equivalent with experience in Customer Service support for at least 3 years.
• Work experience in import/export business, order fulfilment and management or purchasing function is desired.
• Responsible and reliable with integrity, highly adaptable and a great sense of teamwork.
• Willingness to learn new skills and open to development, willing to work extra hours if required.
• Proficient in Microsoft Office & ERP systems, analytical and sensitive to numbers.
• Good interpersonal and communication skills.
• Strong sense of urgency and self-motivation.
• Customer-focused, clear thinker and team player.

JOB DESCRIPTION

Responsibilities:

• Ensure proper risk assessment is in place to provide a safe working environment for workforce by periodically reviewing risks and hazards associated to workplace, executing control measures and communicate effectively to workforce.
• Respond to technical queries from subordinates to account for timely project completion by consulting relevant parties such as mould loft and engineering department for practical solution.
• Monitor quality of welding and NDT completion on end products to prevent carry over work to next station by preforming on site checks and reviewing NDT records.
• Set daily targets for workforce to achieve to account for timely project completion by monitoring daily output and conducting daily reviews of the results.
• Study production drawings to spot possible mistakes or possible fabrication issues to ensure production schedule can be met without unexpected delays by detailed discussion and review of drawings with technical staffs.
• Prepare weekly report on progress and KPI to ensure project progress in on track by monitoring block status and compiling production progress data from site.
• Identify bottlenecks to ensure no unexpected delays to project progress by conducting meetings with subordinates, analyzing weekly reports and formulate optimal production flows for any issues identified.
• Review manpower allocation and effectiveness to ensure project progress is on track by analyzing daily and weekly KPI against progress, discussing with managers should additional manpower or reallocation of manpower is needed.
• Performs supervision on site to ensure fabrication work have been safely executed accordingly to drawings and quality requirements to account for timely project completion by checks on the floor, communicating and getting feedback from workforce.
• Identify the production capacity and plan station schedule to ensure accordance to sequence by comparing to hullshop master schedule and hullshop historical productivity data.
• Set the KPI and manpower allocation for each station to achieve required schedule by analyzing workforce and facilities capabilities and historical date and previous projects.
• Study project requirements, identify any gap that exists with current hullshop practices and propose recommendations to close the gaps to ensure no unexpected delays to project schedule by conducting reviews and meetings with QA and QC personnel.
• Ensure Standard Operation Procedures (SOP) in place so that work can be performed according to project requirements by communicating SOP's to workforce.
• Determine block fabrication sequence to ensure most effective way to fabricate blocks by analyzing drawing and 3D model and holding discussion with production and mould loft team.
• Ensure proper lifting plan is available for blocks to account for safe block lifting by advising engineering lifting team on block fabrication method in advance.
• Review subordinates competency to ensure effectiveness in performing work by analyzing productivity data, non conformance received and feedback from QA, QC and clients.
• Take active role in Incident Investigation to find root cause and proper preventive measures are implemented by conducting interviews with injured person(s) and witnesses, analyzing accident scenes and other investigative processes together with HSE Team.
• Propose training required by workforce to prevent shortfall in certain roles by compiling workforce skills and comparing with production requirements.
• Participate in Safety Innovation Programs by actively contributing to department Safety Innovation Team

JOB REQUIREMENTS

Requirements:

• Degree in Engineering
• At least 3 years of relevant working experience, preferably in marine/ offshore industry
• Knowledge of functional and operational requirements related to design of all types of ships and offshore vessels
• Knowledge and experience of his engineering field
• Knowledge of regulatory and class requirements
• Able to read and understand engineering drawings
• Possess good communication and interpersonal skills
• Possess supervisory skill to coach and motivate staff
• Able to work in a team
• Proficient in Microsoft Office and engineering design software (e.g. Tribon, GEMS)

Seatrium - Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Job Responsibilities

• Responsible for developing all electrical, controls, instrumentation documents and specification for the project.
• To carry out electrical, controls and instrumentation related detailed design and preparation of drawings and datasheets
• To interpret and interface with other engineering discipline documents like P&ID, GA, client control and instrumentation systems
• To check and review all electrical, controls, instrumentation related drawings and documents from suppliers and vendors.
• To liaise with clients, consultants, sub-contractors and OEM to resolve technical issue at site and in office.
• To interface with engineers of other disciplines within the engineering department.
• To prepare procurement support including evaluation of technical and commercial bid from vendor and supplier.
• To provide engineering support in tendering of new projects such as preliminary design, material and cost estimates etc.
• To provide technical support to project team for on-going projects and resolve any technical issue on site.

Job Requirements

• Degree or Diploma in Controls, Electronics and Electrical Engineering.
• 3 years relevant experience required for Senior position
• Knowledge of SCADA, PLC and other instrumentation systems will be an advantageous
• Experience in design and drafting of LV and HV systems.
• Familiar with Electrical Installation works and international electrical codes and standards.
• Knowledge in MS, Autocad, Programming languages will be advantageous
• Strong analytical, communication and presentation skills.
• A self-motivated team player with a high level of creativity and initiative.
• Willing to travel occasionally.
• Able to work independently in a flexible, dynamic and fast-paced environment.

Responsibilities:

• Assist the Business Development Manager and/or Management to support business unit growth and profit objectives, driving demand for select area of business
• Ensure to meet business unit objectives, sales goals and client retention goals; increase brand recognition; and enhances market position
• Manage PSC marketing efforts including marketing materials, website, social media, tradeshows and events
• Develop a thorough knowledge of products and services, business models, operations, competition, and the industry
• Develop and maintain technical sales expertise, stay updated on all trend and development related to product portfolio
• Track sales progress and support forecast efforts
• Identify business opportunities by identifying prospects and evaluating their position in the industry; researching and analysing sales options
• Support Sales staff in key account management through sales cycle in the preparation of quotations, proposals, service contracts, purchase orders, deliveries and manage customer payments
• Establish pricing strategy to improve on product sales and for new business opportunities
• Support local sales process in tender specification, configuration, product presentation and demonstration, trial, user training and support for onsite service coordination
• Manage customer satisfaction
• Follow up on submitted information by telephone or email
• Be committed to independence, neutrality and impartiality in dealing with colleagues, customers and supplier; safeguarding the confidentiality of customers and suppliers, will not disclose confidential information to third parties unless prior agreement has been provided

Requirements:

• Diploma or Degree in Chemical Engineering, Chemistry, Business Management or Marketing or equivalent. Preferably with experience in Services / Product Marketing
• Excellent Microsoft Office skills specifically Word and Excel
• Excellent administration skills
• Business-to-business marketing experience
• Excellent written and spoken English communication skills
• Good eye for detail
• Team player

Responsibilities:

• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall produce and review all design deliverables, including design specifications, schedules, drawings, and calculations, and have a comprehensive knowledge of CAD and BIM design.
• The candidate shall review clients' or third-party designs and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall challenge client asset standards where a clear opportunity exists to use an alternative, cost-effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX
• Preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The candidate shall have about 8 years of experience in mechanical design works, preferably with contractor experience in water and wastewater industry
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be advantageous, by reviewing pump calculations, hydraulic calculations, P&IDs, Process Flow Diagrams and technical specifications
• General experience in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Job Responsibilities:

• Supervise new erections, additions, and alterations (A&A) to existing buildings, including earth retaining and stabilizing systems, as well as specialist designs for demolition works.
• Plan and implement the project,ensuring all construction activities on-site align with the master and detailed work programs.
• Work independently and as an integral member of the Site Management team.
• Prepare, plan, and submit project-related documents such as schedules, method statements, design plans, risk assessments, monthly reports, etc.
• Supervise the execution of construction works to ensure compliance with contract specifications, construction drawings, the company’s quality standards, Environmental, Safety & Health (ESH) practices, and other contract documents.
• Coordinate and liaise with the client’s representatives, relevant authorities, consultants, subcontractors, suppliers, etc., to address both technical and non-technical issues and document resolutions.
• Plan and coordinate site works while resolving drawing details and discrepancies.
• Identify potential and existing problems impacting the work schedule, offering solutions to the relevant team/department.
• Liaise with clients or consultants for site inspections and technical report submissions, ensuring all necessary records are maintained on-site.
• Assist the Contracts Department (QS) in verifying progress payments and claims from contractors.
• Attend regular meetings with clients’ representatives, consultants, and contractors to ensure project progress is on schedule.
• Establish and maintain an effective document control system, conducting reviews of detailed design drawings, project documents, and specifications.

Job Requirements:

• A minimum of a Degree in Civil Engineering, Architecture, or an equivalent field.
• At least 10 years of project or site management experience, particularly in Demolition projects.
• A driven individual with the ability to work independently and lead site management activities effectively.
• Familiarity with wiresaw cutter and waterjet cutter methods for demolition is a must.

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 5 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

About the role

To run R&D, product development activities and projects related to aerogel such as paints and fire resistant coatings, boards, blankets and other innovation solutions for commercial thermal insulation applications for various industries such as Oil and Gas, Built and Environment, Marine and Offshore and Electric Vehicles. As a core member, it has a pivotal role in shaping the technology, developing the core products together and defining the vision of the company.

Locations: 8 Cleantech Loop, #08-37 Singapore 637145 .CleanTech 3

Working Days: 5 days a week

Time: 9 - 6 pm

Basic Salary ranges from $4500 to $7000 (Depending on qualifications and experience).

Other benefits include transport allowance and basic medical coverage, annual leave, paternity/maternity and compassionate leave.

Roles & Responsibilities

• Establish R&D procedures and work processes.
• Manage laboratory day-to-day operations including lab organization, laboratory facilities, and safety protocols.
• Stay up to date with scientific literature/patent, brainstorm new ideas with founders and contribute to the intellectual property of the company.
• Development of new and/or improved product formulation to meet customers requirements.
• Work closely with business team and customers/industry partner for pilot trials, implement their feedback and improve existing product to achieve customer specification.
• Development of a suitable manufacturing process for the product formulation.
• Production of sample batch in lab scale and pilot scale.
• Responsible for effective technology transfer and upscaling to commercial scale batches
• Work closely with process engineers to validate manufacturing methods for production scale batches.
• Train production personnel on manufacturing processes.
• Source and evaluate new raw materials for formulation improvement to roll out new variants.
• Monitors the progress of stability study for R&D samples.
• Develop technical specifications, datasheets for commercial and R&D products.
• Trouble-shooting in the areas of formulation and process for routine production.
• Provides documentation to support registration of products with regulatory authority.
• To ensure the quality of product is in accordance with the specification.
• To ensure that products are produced, stored according to the appropriate documentation and monitor storage conditions for materials and products in order to obtain or maintain the required quality.
• To implement quality control framework for commercial products such as COA and COC.
• To ensure that company is always updated with the regulatory requirements.
• To establish and maintain Good Manufacturing Practices for all R&D and commercial projects.
• Mentor and manage junior staff.
• Prepare progress update and presentations
• To ensure all GMP quality related record are kept properly

Requirements

• A minimum of bachelors degree in chemical engineering, chemistry, materials science/engineering, manufacturing engineering, or a related field.
• A minimum of 5 years' experience with track record in formulating / developing new coating products with commercial release.
• Experience working with various types of solvent free, water based and solvent-based coatings /paint chemistry is advantageous.
• Leadership abilities, problem solving skills and a good communicator
• Experience in paint additive chemistry
• Project Management expertise
• Experience in industrial coating performance standards such as ISO, ASTM., etc.
• Ability to drive innovation and creativity in a team setting
• Experience in nanotechnology or surface coatings is a plus
• Ambitious, confident, curious and decisive amidst ambiguity and uncertainty

To Apply:

You can apply directly by sending your cover letter and resume directly to [email protected] quoting ‘Lead Materials Engineer (R&D)’ in the subject line. In the CV/resume, outline why you would be the best fit for this job, date of availability, residential status in Singapore, details of your educational background and work experience.

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore

JOB DUTIES & RESPONSIBLITIES:

1. Organize, monitor and ensure manufacturing processes operated with minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.

2. Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.

3. Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.

4. Work with HR Department and assure that employee grievances are addressed in a timely fashion.

5. Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the maintenance technicians and engineering staff.

6. Maintain and ensure work safety and practices. Also continually improve safety record by addressing both physical safety issues and employee safety attitudes.

7. Maintain and improve housekeeping in all areas.

8. Evaluate, Train and Maintain individual skills (including work performance) are keeping up to date with best engineering management concepts and practices.

9. Ensure on time submission of overtime record to HR Dept for computation of monthly salary.

10. Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.

11. Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.

12. Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner.

13. Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the staff.

14. Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.

15. Assist in hiring of production personnel.

16. Maintain and update operating manuals for all the manufacturing equipment and facilities.

17. Maintain and update operating training manuals for all manufacturing processes.

18. Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

Skill/Experience

* Minimum 2-3 years working experience in manufacturing environment.

* Able to supervise and lead the subordinates.

* Willing to work after working hour or during non-working days.

* Able to work under pressure.

* Computer literate.

* Knowledge in ISO is an advantage.

WhatsApp me @ 8780 0117 for a prompt response to your enquiry!

Joreen Hung | Reg No.: R24119971

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Job Description

Sea Forrest Engineering Pte Ltd (a subsidiary of BH Global Corporation Ltd) seeking a skilled and experienced Electrical Design and Commissioning Engineer to join our dynamic team specializing in marine vessel electrical propulsion and energy management systems. The ideal candidate will have a strong background in electrical engineering, a deep understanding of marine systems, and a proven track record of designing and commissioning complex electrical systems for marine vessels. This role will involve working on cutting-edge technologies to enhance the performance, efficiency, and reliability of propulsion and control systems for various types of marine vessels.

Responsibilities

1) Electrical Design

• Collaborate with cross-functional teams to define electrical system requirements, specifications, and design criteria for marine vessel propulsion and control systems.
• Develop detailed electrical schematics, wiring diagrams, and layouts using industry-standard design tools.
• Select appropriate electrical components, equipment, and materials to ensure compliance with safety, regulatory, and performance standards.
• Design and implement control logic, automation, and monitoring systems for propulsion and manoeuvring.

2) Commissioning and Integration

• Oversee the installation, integration, and testing of electrical systems on marine vessels during construction or retrofit projects.
• Conduct thorough testing, troubleshooting, and validation of electrical systems to ensure proper functionality and adherence to design specifications.
• Collaborate with shipyard personnel and subcontractors to ensure proper installation and alignment of propulsion and control components.
• Coordinate with project managers to establish commissioning schedules, manage resources, and ensure timely project completion.

3) System Optimization and Performance Enhancement

• Analyse and evaluate the performance of propulsion and control systems, identifying opportunities for optimization, efficiency improvement, and performance enhancement.
• Work closely with the research and development team to implement innovative technologies and solutions to address emerging challenges in marine propulsion and control.

4) Documentation and Reporting

• Create comprehensive technical documentation, including operation manuals, maintenance guides, and as-built drawings for electrical systems.
• Generate commissioning reports, test procedures, and status updates for internal teams, project stakeholders, and clients.

5) Regulatory Compliance and Safety

• Ensure that all designed and commissioned electrical systems comply with relevant maritime regulations, industry standards, and safety guidelines.
• Collaborate with regulatory bodies and classification societies to obtain necessary approvals and certifications for electrical systems.

Requirements

• Diploma or Bachelor's degree in Electrical Engineering or related field.
• Proven experience (5+ years) in electrical design and commissioning, preferably in marine propulsion and control systems.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, EPLAN) and simulation tools.
• Strong knowledge of marine electrical systems, power distribution, propulsion methods, and control strategies.
• Familiarity with marine industry standards (e.g., ABS, DNV, IMO) and relevant regulations.
• Excellent problem-solving skills and ability to troubleshoot complex electrical issues.
• Effective communication skills for collaborating with multidisciplinary teams and presenting technical information to clients and stakeholders.
• Project management skills with the ability to manage priorities, timelines, and resources effectively.
• Willingness to travel to shipyards and vessels for commissioning activities.
• Willingness to travel overseas as required.
• Positive with a can-do attitude.

Interested candidates, do send your resume to [email protected]

**Shortlisted candidates will be notified through email for an interview.

Purpose and Scope

You will provide mechanical maintenance works to support the operations of the Energy from Waste plant.

Key Roles and Responsibilities

• Plan and schedule corrective and preventive maintenance works. Include liaising with operations, prioritize jobs, mobilize work force, spares and allocate resources
• Lead technicians in implementing in preventive and corrective maintenance
• Trouble shoot critical or major plant issues, participate in Root Cause Analysis (RCA) studies, plant improvement initiative, and drive cost management.
• Implement management initiatives to optimize the assets and seek to continuously improve on the methods, procedures and update with the latest developments in the market by adopting a suitable approach like proactive initiatives viz predictive and preventive maintenance activities and default actions like failure finding, redesign and run to failure
• Review budget, monitor spending against budget. control cost
• Upkeep risk registers, take part in safety walkdowns, implement safety initiatives, and ensure that good safety practices are practiced by all parties’ maintenance work
• Develop and establish maintenance procedures, risk assessment and method statements for all maintenance activities to ensure safe execution
• Ensure that maintenance works, and plant equipment comply with Statutory Requirements
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)
• Other ad-hoc duties as assigned

Qualification, Skills and Experience

• Degree in Mechanical engineering
• Minimum 3 years’ experience in a Power Plant environment or oil & gas industry
• Organized and detail oriented
• Good Team player and able to deliver results within tight deadlines
• Strong interpersonal, communication and presentation skills
• Proactive in keeping up with new technologies and looking for solutions to optimize plant operations
• Independent with initiatives, resourceful and positive altitude
• Possess good leadership skills
• Good attitudes and willing to learn from experienced people
• Willing to conduct literature researches for problem solving and carry out root cause analysis

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.