Overall Job Objectives

Assists the PM to oversee the construction activities, progress, planning, implementing, and monitoring of work schedules in accordance with the master and detailed work programme.

Core Responsibilities

1. Attend site meetings and inspection

2. Preparation of documentation including project status report, method of statement and work procedure for the project.

3. Planning, executing, monitoring and control of the project.

4. Liaising and coordinating with all parties such as clients, consultants, consultants’ representatives, site supervisors, and sub-contractors

5. Handing of technical and engineering problems

6. Supervise ongoing site activities closely

7. Ensuring that the quality control of the project is met

8. Ensure that all the construction safety rules and regulations are being observed

9. Prepare necessary work and safety permits, submission documents and drawings once work are completed.

10. Any other ad-hoc tasks assigned

Job Specifications

1. Degree in Engineering or related disciplines

2. Able to read/understand/execute work based on construction drawings

3. Good communication, interpersonal and collaboration skills

4. Minimum 3 years of relevant experience.

Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Purpose: Responsible for establishing process steps to produce in-house-made parts and meet customer expectations concerning quality, lead time, cost, and technological needs. Process Engineer drives improvements in process methods to enhance performance and output.

Key Area of Responsibilities:

• Establish process steps to produce in-house-made parts and meet customer expectations in terms of quality, lead time, cost, and technological needs, without compromising health and safety.
• Create process routing (work instructions) & BOM in BaaN, and prepare an Inspection Method Sheet (IMS)/checklist.
• Read and interpret 2D drawing, 3D model and customer specifications on drawing.
• Ensure process routing is ready for both the first article and volume production.
• Perform sustaining engineering work (documentation of the process, optimization of resources, support production team, resolving technical/quality issues).
• Monitor process performance (quality, cost, lead time) and yield using tools (e.g.: SPC).
• Monitor First Article (FA) progress and resolve technical issues in a timely manner to ensure smooth production flow from FA to volume production.
• Drive improvements to process methods to enhance performance and output.
• Take accountability in leading special projects and processes, treating it like a specialist in the identified process assigned by a superior.

Qualification & Experiences:

• Degree in Mechanical, Precision Engineering, or other relevant discipline.
• Minimum 3 years of working experience in the precision machining industry.
• Strong knowledge of manufacturing processes
• Knowledge of interpretation of engineering drawing
• Knowledge of designing tools (GD&T)
• Problem Solving and Continuous Improvement

Maintain budgets and adjust according to needs as they arise.

Track performance and analyse the completion of key goals.

Document and report project progress to stakeholders and clients.

Problem solving skills with for to manage the pressurised situations.

Coordination and good communication with our own team for project support and sharing experience.

Field Engineer - Job Summary

A Field Engineer is responsible for overseeing and managing engineering projects at construction or operational sites. They ensure that the work is executed according to plans, specifications, and safety standards. This role combines technical skills with hands-on fieldwork to address real-time issues during construction, installation, and testing.

Key Responsibilities:

• Project Supervision: Oversee construction or installation processes, ensuring work meets project specifications and quality standards.
• Site Inspections: Conduct regular site inspections to monitor progress, identify issues, and ensure safety protocols are followed.
• Coordination: Work closely with contractors, engineers, and other stakeholders to ensure efficient execution of the project.
• Documentation: Maintain detailed records of work progress, site conditions, and any deviations from the original plans.

Skills & Qualifications:

• A Bachelor's degree or Diploma in Civil Engineering, Mechanical Engineering, Electrical Engineering, or related fields.
• Fresh graduates are welcome to apply, with on-the-job training and mentorship opportunities.
• Strong problem-solving, communication, and organizational skills.
• Ability to work in field environments
• Able to work under pressure.

Responsibilities:

• Execute service and maintenance workflows efficiently.
• Coordinate with client representatives on all service/maintenance matters.
• Assist the supervisor in organizing teams for service tasks and delegating responsibilities.
• Manage daily client interactions, ensuring their expectations are met.
• Support the supervisor in troubleshooting and timely completion of security system services.
• Understand each client's business to ensure high customer satisfaction.
• Ensure all work complies with Workplace Safety and Health Act regulations.

Requirements:

• Minimum Nitec in Electrical/Electronic Engineering.
• At least 2 years of working experience in related field.
• Requires knowledge and practical experience with security systems (e.g., Integrated Security Management, Card Access Control, Intrusion Detection, and CCTV systems).
• IT/Network/Server knowledge is a plus.
• Transport allowance provided.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Summary

The Lead Technical Officer for Electric Vehicle (EV) Buses will oversee the technical aspects of the development, deployment, and maintenance of electric bus systems. The role involves coordinating engineering teams, ensuring compliance with industry standards, optimizing performance, and leading innovation in electric bus technology. The Lead Technical Officer will collaborate with manufacturers, suppliers, and regulatory bodies to implement sustainable and cost-effective electric bus solutions. The role also includes managing the technical roadmap, troubleshooting issues, and ensuring fleet reliability and safety.

Key Responsibilities :

Technical Leadership

• Lead the design, development, and implementation of EV bus systems and infrastructure.
• Oversee and manage the technical team, ensuring that all projects align with company goals and industry standards.
• Ensure continuous improvement of EV bus technology, including batteries, charging systems, electric motors, and control systems.

Innovation and Research

• Stay updated with the latest developments in EV technology, batteries, energy storage, and charging solutions.
• Lead research initiatives aimed at improving EV bus efficiency, reducing costs, and enhancing durability and performance.
• Collaborate with R&D teams to drive innovation in areas such as fast-charging technologies, vehicle-to-grid (V2G) integration, and energy management systems.

Compliance and Safety

• Ensure that all EV buses meet regulatory requirements, safety standards, and environmental guidelines.
• Oversee the development and implementation of safety protocols for EV bus operations, including battery safety, charging infrastructure, and maintenance procedures.
• Monitor and assess the performance of EV buses to ensure reliability, safety, and efficiency.

Training and Development

• Develop training programs for technical staff on new technologies, systems, and troubleshooting methods related to electric buses.
• Provide leadership, mentorship, and development opportunities to junior engineers and technical personnel.

Data Analysis and Reporting

• Monitor performance data from electric buses, analyze trends, and identify areas for improvement.
• Prepare detailed technical reports, performance reviews, and presentations for senior management and stakeholders.

Job Summary

The Lead Technical Officer for Electric Vehicle (EV) Buses will oversee the technical aspects of the development, deployment, and maintenance of electric bus systems. The role involves coordinating engineering teams, ensuring compliance with industry standards, optimizing performance, and leading innovation in electric bus technology. The Lead Technical Officer will collaborate with manufacturers, suppliers, and regulatory bodies to implement sustainable and cost-effective electric bus solutions. The role also includes managing the technical roadmap, troubleshooting issues, and ensuring fleet reliability and safety.

Key Responsibilities :

Technical Leadership

• Lead the design, development, and implementation of EV bus systems and infrastructure.
• Oversee and manage the technical team, ensuring that all projects align with company goals and industry standards.
• Ensure continuous improvement of EV bus technology, including batteries, charging systems, electric motors, and control systems.

Innovation and Research

• Stay updated with the latest developments in EV technology, batteries, energy storage, and charging solutions.
• Lead research initiatives aimed at improving EV bus efficiency, reducing costs, and enhancing durability and performance.
• Collaborate with R&D teams to drive innovation in areas such as fast-charging technologies, vehicle-to-grid (V2G) integration, and energy management systems.

Compliance and Safety

• Ensure that all EV buses meet regulatory requirements, safety standards, and environmental guidelines.
• Oversee the development and implementation of safety protocols for EV bus operations, including battery safety, charging infrastructure, and maintenance procedures.
• Monitor and assess the performance of EV buses to ensure reliability, safety, and efficiency.

Training and Development

• Develop training programs for technical staff on new technologies, systems, and troubleshooting methods related to electric buses.
• Provide leadership, mentorship, and development opportunities to junior engineers and technical personnel.

Data Analysis and Reporting

• Monitor performance data from electric buses, analyze trends, and identify areas for improvement.
• Prepare detailed technical reports, performance reviews, and presentations for senior management and stakeholders.

Job Summary

The Lead Technical Officer for Electric Vehicle (EV) Buses will oversee the technical aspects of the development, deployment, and maintenance of electric bus systems. The role involves coordinating engineering teams, ensuring compliance with industry standards, optimizing performance, and leading innovation in electric bus technology. The Lead Technical Officer will collaborate with manufacturers, suppliers, and regulatory bodies to implement sustainable and cost-effective electric bus solutions. The role also includes managing the technical roadmap, troubleshooting issues, and ensuring fleet reliability and safety.

Key Responsibilities :

Technical Leadership

• Lead the design, development, and implementation of EV bus systems and infrastructure.
• Oversee and manage the technical team, ensuring that all projects align with company goals and industry standards.
• Ensure continuous improvement of EV bus technology, including batteries, charging systems, electric motors, and control systems.

Innovation and Research

• Stay updated with the latest developments in EV technology, batteries, energy storage, and charging solutions.
• Lead research initiatives aimed at improving EV bus efficiency, reducing costs, and enhancing durability and performance.
• Collaborate with R&D teams to drive innovation in areas such as fast-charging technologies, vehicle-to-grid (V2G) integration, and energy management systems.

Compliance and Safety

• Ensure that all EV buses meet regulatory requirements, safety standards, and environmental guidelines.
• Oversee the development and implementation of safety protocols for EV bus operations, including battery safety, charging infrastructure, and maintenance procedures.
• Monitor and assess the performance of EV buses to ensure reliability, safety, and efficiency.

Training and Development

• Develop training programs for technical staff on new technologies, systems, and troubleshooting methods related to electric buses.
• Provide leadership, mentorship, and development opportunities to junior engineers and technical personnel.

Data Analysis and Reporting

• Monitor performance data from electric buses, analyze trends, and identify areas for improvement.
• Prepare detailed technical reports, performance reviews, and presentations for senior management and stakeholders.

COMPANY DESCRIPTION

REC Group is an international pioneering solar energy company dedicated to empowering consumers with clean, affordable solar power through high-quality solar panels with a leading power density. As Solar's Most Trusted, REC is known for its patented innovations and multiple award-winning products with reliable long-term performance. The cornerstone for REC's strong reliability is advanced and highly efficient manufacturing using Industry 4.0 practices. Founded in 1996 in Norway, REC has always been committed to a low carbon footprint in its solar materials and panels. REC is headquartered in Norway with operational headquarters in Singapore and regional hubs in North America, Europe, and Asia-Pacific. As of December 2021, REC is part of Reliance Industries Limited, India's largest private sector company with revenues of USD 104.6 billion.

Find out more at recgroup.com

RESPONSIBILITIES

Be the key driver to ensure that REC Modules deliver world class leading top quality product through well controlled process and manufacturing flow, from material supplies to product deliveries.

Be key driver to ensure improvement, qualification and implementation of new processes/products including changes and/or new product introduction, are in-line with the overall production performance enhancement targets.

Support production line issues with appropriate and permanent corrective solution, as and when necessary.

In plant expansion phase, work closely with process/equipment/technology and contribute to establish good product quality and specification.

Establish investment proposals and projects in order to utilize best available practice and competence.

Support managements' directives and projects as and when needed.

Possessed very good ability in project management, providing key milestone, timeline and execution, overseeing the completion of project on time.

Candidate working in Cell PD is responsible for development new cell processes or optimize existing processes in Solar cell Manufacturing.

Candidate will need to work with external suppliers to bring in new materials or integrate new processes into the current cell processing line. Candidate will also work on continuous improvement projects to improve the cell efficiency and cost of a solar cell.

Candidate with semiconductor or solar cell background would have an added advantage.

Able to mentor junior cell PD engineers and be a role model for them.

Depending on the competencies developed, process development will be required to be rotated to different departments as required by management.

• Degree in engineering disciplines (electrical, mechanical, mechatronics, material science or related discipline)
• 5 years or more working experience
• Knowledge in product design environment.
• Knowledge of interpreting design intent for DFM and DFA
• Strong knowledge of semiconductor or PV.
• Knowledge in Prototype PV Module design functionalities that ensure good quality and manufacturability would be an advantage
• Knowledge of product functionality of PV modules/panels would be an advantage
• Good presentation and communication skills
• Must be able to work independently and knowledgeable in project management
• Supportive in other job functions assign by superior

Job Description

• Industry Type: Ship
• Working Location: Boon Lay
• Working Hours: 5.5 days (Alternate Saturday)
• Duration: Permanent Role
• Only Singaporean may apply

Responsibilities

· Responsible for managing the incoming and outgoing orders

· Handle Import/Export permit declarations, custom clearance

· Maintain accurate records of shipping documents as per SOP standards

· Arrange and coordinate import/export shipments

· Coordinate sea/ air freight shipments and transport arrangement

· Liaise with air/sea freight forwarding, shipping lines, transporters to ensure timely delivery of shipment

· Process shipping operation and courier service

· Handling of all billing and invoices

· Ad-hoc duties as and when required

Requirements

· Diploma or equivalent

· With 1 – 3 years of relevant experience

· Proactive and positive working attitude

· Meticulous with good organizational skills

· Proficient in MS Office

· Good interpersonal skills and able to work independently with minimum supervision

Description:

• Understand read of 3D drawing of equipment, piping system and pipe support
• Familiar with equipment layout drawing, detailed piping drawing and isometric drawing.
• Co-ordinate with process, civil & structural, electrical & instrumentation team, to understand the elevation & structural requirements.
• Develop MSRA for mechanical, piping construction works.
• Manage and supervisor workforce for construction works.
• Prepare the material list depicting all the materials, sizes, specification, special requirements, testing requirements to meet the design. This document shall be used as an input for procurement team.
• Review the documents & drawings of vendor supplied equipment, valves, and skids to verify the piping requirements are meet.
• Perform site inspection at vendor manufacturing unit to qualify & check vendor can supply the bulk requirement on demand.
• Assist project & engineering team for modification requirement during construction. Prepare as-built drawings after completion of construction and documents, as necessary.

Requirements:

• Degree in Mechanical Engineering,
• Minimum 3 year’s relevant experience in piping construction and developing process piping system.
• Good knowledge of GA drawings, ISO drawings,
• Knowledge & experience to work in oil & gas plant, chemical plant,
• Able to provide quick and effective technical solutions, to suit requirements at all stage of the project

Responsibilities:

• Execute service and maintenance workflows efficiently.
• Coordinate with client representatives on all service/maintenance matters.
• Assist the supervisor in organizing teams for service tasks and delegating responsibilities.
• Manage daily client interactions, ensuring their expectations are met.
• Support the supervisor in troubleshooting and timely completion of security system services.
• Understand each client's business to ensure high customer satisfaction.
• Ensure all work complies with Workplace Safety and Health Act regulations.

Requirements:

• Minimum Nitec in Electrical/Electronic Engineering.
• At least 2 years of working experience in related field.
• Requires knowledge and practical experience with security systems (e.g., Integrated Security Management, Card Access Control, Intrusion Detection, and CCTV systems).
• IT/Network/Server knowledge is a plus.
• Transport allowance provided.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Milestone 1. To provide technical expertise and solution consultancy for system migration on AFE systems such as Radio Switch, Radio integration, Mux deployment, Power system and deep knowledge on Gov comms operation routine and setup. Scopes Include and not limited to sites surveys, working out ICIT solutions and console placement.

Milestone 2. To supervise installation and setup in accordance to ICIT design. Ensure installation is carried out with minimum operations impact.

Milestone 3. To conduct system testing and assist system acceptance test with end user.

Milestone 4. To provide info and assist in completing Installation control documents and acceptance test plan.

Contract: 1 Year, potentially extendable

Qualifications:

1. 10+ years of experience in dealing with AFE system.

2. Proven ability to understand customer needs and provide appropriate technical solutions.

3. Strong communication skills to explain technical concept to our customers.

Service Engineer

Basic up to $4300

5 days work

Location: Tuas

Key Responsibilities:

* Install, maintain, and repair automatic and manual welding machines and/or CNC Machining

* Diagnose mechanical, electrical, and software-related issues and propose appropriate solutions.

* Conduct preventive maintenance and calibration of equipment to ensure optimal performance.

* Resolve production technical concerns and requirements.

* Provide in-house training on the proper use and maintenance of equipment.

Requirements:

* Proven experience as a Service Engineer or similar role in the O&G industry

* Experience in Fronius machines is a bonus.

EA Name: MANPOWER ACCESS PTE LTD

EA License No: 13C6854

EA Personnel Name: Teo Zhi Wee

EA Personnel Registration No: R22103947

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Purpose and Scope

You will provide mechanical maintenance works to support the operations of the Energy from Waste plant.

Key Roles and Responsibilities

• Plan and schedule corrective and preventive maintenance works. Include liaising with operations, prioritize jobs, mobilize work force, spares and allocate resources
• Lead technicians in implementing in preventive and corrective maintenance
• Trouble shoot critical or major plant issues, participate in Root Cause Analysis (RCA) studies, plant improvement initiative, and drive cost management.
• Implement management initiatives to optimize the assets and seek to continuously improve on the methods, procedures and update with the latest developments in the market by adopting a suitable approach like proactive initiatives viz predictive and preventive maintenance activities and default actions like failure finding, redesign and run to failure
• Review budget, monitor spending against budget. control cost
• Upkeep risk registers, take part in safety walkdowns, implement safety initiatives, and ensure that good safety practices are practiced by all parties’ maintenance work
• Develop and establish maintenance procedures, risk assessment and method statements for all maintenance activities to ensure safe execution
• Ensure that maintenance works, and plant equipment comply with Statutory Requirements
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)
• Other ad-hoc duties as assigned

Qualification, Skills and Experience

• Degree in Mechanical engineering
• Minimum 3 years’ experience in a Power Plant environment or oil & gas industry
• Organized and detail oriented
• Good Team player and able to deliver results within tight deadlines
• Strong interpersonal, communication and presentation skills
• Proactive in keeping up with new technologies and looking for solutions to optimize plant operations
• Independent with initiatives, resourceful and positive altitude
• Possess good leadership skills
• Good attitudes and willing to learn from experienced people
• Willing to conduct literature researches for problem solving and carry out root cause analysis

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

• Coordinating with the client and attending client meeting whenever required
• Supervise and coordinate with team to produce deliverable per schedule and quality
• Administrative role of 3D modelling process with AVEVA software
• Review and comment on various engineering documents
• Design & incoporate structural components of project into AVEVA 3D model and produce 3D structural models
• Multi-discipline design coordination to avoid & correct interferences in AVEVA 3D model
• Prepare construction drawings (2D Structure drawings, bending template, profile nesting, plate nesting and material list) utilizing AVEVA Marine Drafting
• Modelling of Equipment and Outfitting in AVEVA
• Extraction of Outfitting General Arrangement from AVEVA
• Prepare a wide range of engineering related documents such as plot plans, Key plan
• Extraction of Piping layout and Piping General Arrangement from AVEVA
• Extraction of Isometric drawing with MTO and Line list
• Data consistency and Clash checking in AVEVA
• Prepare support drawings
• Checking the piping and other discipline documents as per shipyard payment
• Perform 3D Modelling of Electrical equipment and cable tray/ladder, supports and instruments in AVEVA
• Preparation of 2D deliverables (lighting layout, wiring diagram, equipment layout, interconnection diagram, cable tray/ladder layout, cable tray/ladder fill report and MCT layout)

Job Responsibilities:

1. Design of commercial, residential, industrial buildings in precast.
2. To liaise and coordinate with consultants and main-contractor on project details and resolving technical issues.
3. Accountable for the preparation and completion of precast shop drawings with specific time and meets all clients’ requirements.
4. Accountable for accuracy and updating amendments to precast shop drawings.
5. Attend meetings with consultants and main-contractor as well as site meetings.
6. Manage drafting staff and check drawings to ensure compliance with design concept.
7. Manage, plan and schedule projects, shop drawings for submission and production.
8. To liaise internally with coordinator and production on submission/issuance of shop drawings any technical issue and keep them updated of any revision.
9. Conduct review on details of design to ensure the accuracy of shop drawings produced.

Job Requirements:

1. Bachelor degree in Civil & Structural Engineering from recognised University.
2. 3 years working experience in construction design.
3. Familiar with design analysis software such as Etabs, Prokon etc.
4. Good communication skills.

Build a career with confidence

Carrier Global Corporation, global leader in intelligent climate and energy solutions is committed to creating solutions that matter for people and our planet for generations to come. From the beginning, we've led in inventing new technologies and entirely new industries. Today, we continue to lead because we have a world-class, diverse workforce that puts the customer at the center of everything we do.

About the role

This position is for a Service Sales Representative, who is responsible for pursuing opportunities for quick turn projects to keep our customers operating effectively, supporting various Outside Sales activities and customer relationship management. Responsible for supporting the company's interests and establishing business relationships to enhance outside sales performance.

Key Responsibilities:

As a Sales Engineer, you’ll be responsible for:

• Establishes prospects and develops a professional relationship to understand the customer needs and suggest products and/or services that meet the customer needs.
• Responsible for leveraging existing Service Agreement Customers / Non-Service Agreement Customer base for service repair / Upgrade opportunities.
• Aids in and supports business development activities for prospects within defined customer segment to support the business strategy.
• Provide leads for service agreement sellers / Service Modernization team when dealing with customers not under contract
• Utilize SFDC to manage customer interactions, activities, and opportunity pipeline.
• Prospects bid opportunities, participates in the preparation of bid responses and the negotiation with potential customers.
• Develops personal customer relationships with prospective accounts to influence opportunities.
• Establish and build credibility with knowledge of Carrier products/solutions.
• Develop and sustain customer relationships Clearly articulate the value of Carrier’s value offerings and how they map to the customers’ needs.
• Ability to detect the Customer’s buying stage and adjust selling accordingly.
• Attends trade shows at times to increase the visibility of the organization and potentially influence prospects.
• Achieve order booking in a timely manner meeting consistently sales metrics and annual targets.

Requirements

We are looking for people who has a passion for sales and possesses great communication skills. If this is you, get in touch.

As a minimum you must have:

• Minimum Degree holder.
• Preferably 2-3 years experiences in Sales or Engineering, candidates without prior relevant experience are welcome to apply.
• Proficient in Microsoft Office Skills.
• Able to communicate with stakeholders of all levels.

Benefits

We are committed to offering competitive benefits programs for all of our employees, and enhancing our programs when necessary.

Our commitment to you

Our greatest assets are the expertise, creativity and passion of our employees. We strive to provide a great place to work that attracts, develops and retains the best talent, promotes employee engagement, fosters teamwork and ultimately drives innovation for the benefit of our customers. We strive to create an environment where you feel that you belong, with diversity and inclusion as the engine to growth and innovation. We develop and deploy best-in-class programs and practices, providing enriching career opportunities, listening to employee feedback and always challenging ourselves to do better. This is The Carrier Way.

Join us and make a difference.

Apply Now!

· Report to Project Director / Project Manager.

· Attend site visit and prepare cost estimation.

· Co-ordinating and follow up all the individual respective project team like Civil, E&I, Scaffolding, Automation, Passivation, Safety, Lifting and others.

· As a Controls Engineer you should perform a vital role in designing and developing systems for manufacturing operations.

· Draft tender documents and cost estimation spreadsheet.

· Design layouts, materials and information flow, or machine placement.

· You should responsible to evaluating performance and proposing and implementing improvements new or existing systems.

· Present final figures and unit rates to management.

· Submit tender documents and attend clarification meeting (if requested by client).

· Attend project/ safety meeting with client/sub-contractor/internal and prepare minutes of meeting.

· Prepare overall construction detail schedule for the project.

· Plan, coordinate and execute the job to meet the schedule and quality requirements.

· Prepare / review of project specification, P&ID and material take-off.

· Handling all technical queries and investigating all work-related problems and coordinating with client/sub-contractor/supplier to clarify the problems.

· Ensure the Safety, Productivity and Quality of the project.

· Prepare Method of Statement (MOS), Inspection Test Plan (ITP), Project Schedule and other working procedures.

· Ensure the installation / erection works meets the specification and requirements.

· Liaise with QA/QC personnel and ensure all the works comply with the requirements.

· To carry out inspecting and rectifying any unsafe practices and unsafe place of work.

· You will oversee the safety and job/ project operation.

· Prepare weekly / monthly progress reports/ safety reports/ manpower reports etc.

· You are to direct, guide and manage all tasks under your charge and ensure it is carried out in the most creative, efficient and professional manner to the best of your ability.

· You shall ensure, uphold and comply with all office standards, local by-laws and regulatory requirements.

· Report to Project Director / Project Manager.

· Attend site visit and prepare cost estimation.

· Co-ordinating and follow up all the individual respective project team like Civil, E&I, Scaffolding, Automation, Passivation, Safety, Lifting and others.

· As a Controls Engineer you should perform a vital role in designing and developing systems for manufacturing operations.

· Draft tender documents and cost estimation spreadsheet.

· Design layouts, materials and information flow, or machine placement.

· You should responsible to evaluating performance and proposing and implementing improvements new or existing systems.

· Present final figures and unit rates to management.

· Submit tender documents and attend clarification meeting (if requested by client).

· Attend project/ safety meeting with client/sub-contractor/internal and prepare minutes of meeting.

· Prepare overall construction detail schedule for the project.

· Plan, coordinate and execute the job to meet the schedule and quality requirements.

· Prepare / review of project specification, P&ID and material take-off.

· Handling all technical queries and investigating all work-related problems and coordinating with client/sub-contractor/supplier to clarify the problems.

· Ensure the Safety, Productivity and Quality of the project.

· Prepare Method of Statement (MOS), Inspection Test Plan (ITP), Project Schedule and other working procedures.

· Ensure the installation / erection works meets the specification and requirements.

· Liaise with QA/QC personnel and ensure all the works comply with the requirements.

· To carry out inspecting and rectifying any unsafe practices and unsafe place of work.

· You will oversee the safety and job/ project operation.

· Prepare weekly / monthly progress reports/ safety reports/ manpower reports etc.

· You are to direct, guide and manage all tasks under your charge and ensure it is carried out in the most creative, efficient and professional manner to the best of your ability.

· You shall ensure, uphold and comply with all office standards, local by-laws and regulatory requirements.

• Coordinating with the client and attending client meeting whenever required
• Supervise and coordinate with team to produce deliverable per schedule and quality
• Administrative role of 3D modelling process with AVEVA software
• Review and comment on various engineering documents
• Design & incoporate structural components of project into AVEVA 3D model and produce 3D structural models
• Multi-discipline design coordination to avoid & correct interferences in AVEVA 3D model
• Prepare construction drawings (2D Structure drawings, bending template, profile nesting, plate nesting and material list) utilizing AVEVA Marine Drafting
• Modelling of Equipment and Outfitting in AVEVA
• Extraction of Outfitting General Arrangement from AVEVA
• Prepare a wide range of engineering related documents such as plot plans, Key plan
• Extraction of Piping layout and Piping General Arrangement from AVEVA
• Extraction of Isometric drawing with MTO and Line list
• Data consistency and Clash checking in AVEVA
• Prepare support drawings
• Checking the piping and other discipline documents as per shipyard payment
• Perform 3D Modelling of Electrical equipment and cable tray/ladder, supports and instruments in AVEVA
• Preparation of 2D deliverables (lighting layout, wiring diagram, equipment layout, interconnection diagram, cable tray/ladder layout, cable tray/ladder fill report and MCT layout)