· Degree in Mechanical Engineering

· Minimum 5 years relative Design Experience in Marine Industry

· Able to independently do calculations, develop ship piping system Engine Room Layouts, HVAC, Shafting, etc

· Able to develop Specifications related to Machinery

· Knowledge of different classification Rules Regulations SOLAS,MARPOL,IMO,MEPC etc

· Able to liase with Class, Owner’s Yard & Clients

· Should have adequate knowledge of pipe routings,

· Knowledge of Piping Standards

Job Description:

• Technical review on new project orders and order assignments to Technical Engineer & Drafter team.
• Ensure timely submission of engineering documents i.e. Control Schematic Drawing, General Assembly Drawing, Wiring Diagram, Nameplate Drawing, Test Procedure, Data Sheet etc.
• Review all project engineering documents before submitting them to client.
• Manage engineering change function and ensure engineering documents are updated accordingly.
• Provide advice and guidance to Technical Engineer & Drafter team for any technical queries and to support other ops team on various aspects of technical/engineering matters.
• To check and make recommendations based on common industrial engineering practice, where necessary.
• To provide and implement cost effective and best engineering solutions for project to stay competitive.
• To provide sound engineering practice and engineering calculation where applicable in a timely manner to meet project timeline.
• To review international standards and/or project specifications for product compliance. i.e. ISO 12490 / API 6DX / IOGP S-707 / SHELL DEP standards or other industrial standards related to Valve Automation and/or instrumentation.
• Providing field support for customers to resolve after-sales technical issues or technical clarifications.
• To attend internal/external kick off Meeting (KOM) when required.
• Travel with technicians to installation base and sites if the need arises.
• To assist manager to lead the department’s improvement programs and/or process efficiency initiatives.
• To assist manager in maintaining and updating the department's Standard Operating Procedures.
• To carry out Engineering personnel annual performance review to ensure competency and give counselling when required.
• Support new employee orientation by providing brief engineering department process flow training.
• Support Operations department in resolving aftermarket technical issues such as Product Design changes / Fault Finding / Supplier Discrepancies.
• Support development and upkeep of staff technical competency and training management.
• Performs additional related duties as requested or required.

Requirements:

• Bachelor’s Degree or Diploma in Mechanical/Instrumentation Engineering or equivalent.
• At least 6-8 years supervisory experience in Valve Automation and/or instrumentation background.
• Conversant with ISO 12490 / API 6DX / IOGP S-707 / SHELL DEP standards or other industrial standards related to Valve Automation and/or instrumentation.
• Possess a strong knowledge of pneumatic and hydraulic circuits.
• Must be able to read and interpret drawings, specifications, and technical documents.
• Knowledge of AutoCAD 2D/3D or drafting software & SAP will be an added advantage.
• Familiar and possess intermediate knowledge in Microsoft Office and Microsoft 365
• Very self-driven and able to drive the team.
• Possess strong interpersonal skills and can work as a team.
• Strong verbal and written communication skills

With the business expansion, we're looking to hire a Singapore based Technical Sales Engineer to look after key accounts.

For this role, you will need to

• Build and maintain rapport with existing and potential clients, partners and other stakeholders.
• General sales leads and lead technical and commercial discussion.
• Attend regional marketing event/networking session.
• Gather and analyse on customers/competitors' activities/products/industry developments and compile market intelligence reports, work closely with product development team to fulfill client's requirement.
• Deliver product presentations to current and potential clients.

Job requirement

• Degree/Diploma in any field (engineering related major is preferred).
• At least 2 years of sales experience within engineering space, candidates with technical background are welcome to apply.
• Team player and independent, good communication skills.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

In Helmsion Engineering, we believe each and everyone in the company are valuable in contributing to our business. Besides monetary rewards, we also provide on-job training. In this role you will make an important contribution to the entire sales process from business development prospecting to closing of sales.

Sales Engineer

· Coordinate and participate in sales reporting and customer meetings.

· Provide good customer service with technical support and attend to their enquiries.

· Conduct site visits and assessments to meet the clients' needs.

· Seek referrals andcontinue to build customer base.

· Analyse opportunities and make recommendations to customers’ requirements.

· Clearly articulate the value of Helmsion products and services, demonstrate a strong understanding of our product offerings and the competitive landscape.

· Prepare budgetary proposals, Request for Information, Request for Proposals.

· Work with the team to negotiate and close complex deals.

· Strategize with the team to explore the market and maximize profits.

· Prepare analysis reports on sales performance against revenue objectives, sales productivity and ideas to review effectiveness.

Requirements

· Degree in Business/Mechanical Engineering or Technical Education

· Excellent multi-lingual and interpersonal skills

· Excellent time-management with consistent follow-up skills

· Team player who can work independently and possess a ‘go-getter’ attitude

· Excellent relationship management skills with the ability to establish and maintain strong relationships with contacts

· Experience in outdoor industrial equipment sales will be an advantage

· Basic + Allowance - HP & Transport + Commission base on sales target

· Required to visit customers

· Fresh graduates are welcomed to apply if:

(1) you are a team player with strong desire to learn and succeed

(2) Positive, high energy, enthusiasm, drive with an extroverted character

(3) Enjoy working and engaging with people from all walks of life, building professional networks with them

Purpose: Responsible for supervising staff, ensuring health and safety regulations at work are followed, making sure adequate training has been provided to the workers in the usage of equipment, and identifying deficiencies to be improved in production.

Key Area of Responsibilities:

• Supervising the man and assembly process, ensuring quality work is done safely and efficiently.
• Organize and motivate the mini-companies to perform daily production activities.
• Draw up training, and job rotation plans to develop manpower to be more flexible and competent and stimulate continuous productivity improvement.
• Liaising with other Engineers to develop plans that improve productivity, in terms of costs and manpower required.
• Support engineering/manufacturing teams, draw up safety protocols, report issues to the manager, and develop strategies to improve efficiency and profit.
• Take part in quality meetings with QA and process, conduct production CAB meetings, and ensure corrective actions are carried out.
• Conduct daily supervisor and production meetings to achieve delivery reliability.
• Record and report on the department’s activities and production results regularly in each productivity review meeting.
• Manage consumables and non-capitalized equipment spending.
• Maintain and ensure 5S housekeeping on the shop floor.

Qualification & Experiences:

• Diploma/bachelor’s in engineering (Mechanical, Mechatronics, Electrical, Precision or Industrial Engineering).
• At least 3 years of experience as an engineer in the manufacturing assembly environment.
• Good communication skills to perform mentoring and coaching to production staff.
• Good knowledge in problem-solving methodology.
• Ensure the safety standards and process safety management is duly followed.

Purpose: Provide the fabrication steps & process time to calculate the cost of the part. This includes assessing whether the design provided is machinable, the availability of machines or tools to support the requirements and proposing cost-efficient methods.

Key Areas of Responsibility:

• Provide machining process steps for quote submission to determine process cost calculation.
• Review the part drawings & specifications provided and consider the critical dimensions or process.
• Identify machining issues and provide Design for Manufacturing (DFM) slides to highlight issues; present an alternative proposal when possible.
• Generate a drawing/list of the requirements before sending the Request for Quote (RFQ) to suppliers.
• Inform suppliers of requirements & stipulate a cost breakdown list. Ensure that suppliers meet the specified timeline.
• Provide Part Cost estimation for Outsource Build to Print (BTP) parts for the Commodity team to use as a price reference.
• Mentor new hires on operations and part calculation processes to ensure they receive the information and guidance needed to perform their jobs effectively.
• Support and participate in company continuous improvement program.

Qualifications & Experiences:

• Nitec/Dilpoma/Degree in Mechanical Engineering or relevant field.
• Minimum 1 year of working experience in the Semiconductor or High precision equipment industry, with relevance to costing will be an advantage.
• Knowledge of Solidworks or other computer-aid design software.
• Application of measuring equipment and techniques
• Knowledge of geometric dimensioning and tolerancing

• 5.5 Days work
• 8.30am to 5.30pm, 8.30am to 12.30pm
• Office at Kallang
• Yearly renewable contract + Completion Bonus

Responsibilities:

• Assist and support the Project Manager in handling and monitoring the progress of projects to ensure that work on site is on schedule
• Liaise and co-ordinate project site works with consultants, vendors/suppliers and sub-contractors
• Carry out site supervision and ensure work done on site is fully complied with specification and drawing
• Work with sub-contractors on shop drawings, equipment submission, site inspection and testing & commissioning matters

Requirement:

• Diploma in Mechanical / Electrical Engineering or similar
• Min 4 years of working experience involving ACMV and M&E works

Kindly submit your CV by clicking “APPLY Now” or email to "[email protected]"

EA Reg. No: R1880058 | Dylan

About Beca

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.

We are currently recruiting for an Executive Engineer – Electrical to join our Building Services team. This position will be based in our Singapore Office.

Executive Engineer - Electrical (Building Services)

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

In this role, you will be responsible to:

● Carry out engineering design with minimal supervision in accordance with local codes or relevant international design codes

● Assume responsibility and undertake engineering tasks of increasing scope and complexity

● Responsible for analysis of information, production of design, tenders, proposals and technical report writing

● Assist in coordination of quality assurance and commissioning of designs with other disciplines and other design consultants

● Observe, review and report of works on site

● Handle client liaison and reporting

● Provide leadership to projects including planning, monitoring, progress and job cost reporting

● Assist in assessment and review of designs prepared by others on behalf of the clients

● Liaise with authorities on plans submission and compliance

● To work with the Qualified Person (QP) to develop electrical building services designs and calculations.

Job Requirements

· Degree in Electrical Engineering

. Minimum 3 years’ experience in the design & supervision of building service projects

· Experience in design & design management of healthcare, residential, commercial, institutional or hotel projects will be an advantage

· Familiarity with codes of practice, relevant regulations and a working knowledge of authority submission and approval procedures

· Experience user with relevant engineering software, Building Information Modelling and Navisworks

· Excellent written & spoken communication skills in English

· Able to work independently & exercise initiative

· Excellent delegation and communication skills, which see you enlist the help of others to meet objectives

· A team, client and delivery focused working style

· Experience in a consulting environment

Job Highlights

· Career Advancement

· Medical Allowance

· AWS & Variable Bonus

Ready to make a move?

We offer a comprehensive career growth and development programme along with a vibrant and supportive team environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for its people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply now with your CV and cover letter online today.

Please include the following information in your resume:

· Education background

· Work experiences

· Reason(s) for leaving (if any)

· Current and Expected salary

· Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Develops and manages new designs in accordance with project requirements and objectives, while adhering to project milestones and schedule.
• Conduct feasibility studies, FMEA, cost analysis and material selection to support design decisions.
• Collaborate closely manufacturers, and suppliers to address technical challenges through DFM & DFA and ensure successful implementation of designs.
• Prepare and present design proposals, progress reports, and project updates to stakeholders, while abiding to timely delivery within project’s budget.
• Utilizes SolidWorks software to generate detailed 3D models and technical drawings for prototypes and production.
• Setup test plans using DOE methodology, analyze test results and iterate design to meet performance and quality standards.
• Participate in team design reviews, providing constructive feedback and contributing to continuous improvement initiatives.

Job Requirements

• Bachelor’s Degree in Mechanical/Material Engineering is required.
• Min 3 years’ design experience in a product development environment, contributing to a product’s successful delivery into series production will be preferred.
• Proficiency in CAD software for 3D modeling and technical drawings, SolidWorks knowledge will be preferred.
• Strong understanding of materials and manufacturing processes. Knowledge in machining, metal forming, heat treatment and casting are preferred.
• Knowledgeable in design principles, such as springs, bearings and hydraulics, and in theoretical calculations related to the field of statics, dynamics and kinematics.
• Keen interest and experience in a hands on approach towards the construction of prototypes and testing.

Responsibilities:

• Execute service and maintenance workflows efficiently.
• Coordinate with client representatives on all service/maintenance matters.
• Assist the supervisor in organizing teams for service tasks and delegating responsibilities.
• Manage daily client interactions, ensuring their expectations are met.
• Support the supervisor in troubleshooting and timely completion of security system services.
• Understand each client's business to ensure high customer satisfaction.
• Ensure all work complies with Workplace Safety and Health Act regulations.

Requirements:

• Minimum Nitec in Electrical/Electronic Engineering.
• At least 2 years of working experience in related field.
• Requires knowledge and practical experience with security systems (e.g., Integrated Security Management, Card Access Control, Intrusion Detection, and CCTV systems).
• IT/Network/Server knowledge is a plus.
• Transport allowance provided.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

THIS IS A 2-YEARS RENEWABLE / CONVERTIBLE CONTRACT ROLE

The Centre Management System Support, Executive/Senior Executive is responsible for overseeing the upkeep, procurement & maintenance of all exhibits, audio-visual equipment, facilities and essential services for daily operations for centres/museums under Defence Collective Singapore (DCS).

RESPONSIBILITIES

• Maintenance Planning: Planning and implementation of building maintenance programs for architectural, electrical, and mechanical, exhibits and attractions AV lighting systems. Co-ordinate and liaise with internal and external vendors for the execution of maintenance services. Conduct joint inspection rounds with Specialists/Technical Officers on building/Exhibit/AV & lighting defects.
• Safety Compliance: Ensure compliance with safety equipment, work methods, and procedures. Promptly rectify any unsafe situations, adhering to Workplace Safety and Health (WSH) regulations. Be responsible for implementing Company’s SOP and policies including compliance to QEHS policies. Conducting regular checks on the entire building to ensure the prompt removal of fire hazards, proper functioning of fire escapes, fire doors, and obstruction-free access.
• Supervise Works: Control and supervise all AV Lighting and exhibition related works performed by Specialists/Technical Officers and contractors, including those carried out by tenant's fitting out contractors. Supervise and inspect the works of contractors and the works of the service providers (cleaning, housekeeping, landscaping, pest control, car park and security). To ensure contractors’ compliance to safety, regulations and level of standards set by DCS.
• Repairs and Emergency Situations: Responding to emergency situations & troubleshoot sound and video and ensuring prompt repairs of property facilities. Providing updates to Centre Management team with regards to the situation.
• Procurement: Manage budgetary control of expenditures including preparation of annual budgets and forecast. Conduct tender exercises for OPEX/CAPEX works such as replacement, upgrading or redevelopment works and manage such works according to timeline including putting up of documents and procurement for OPEX/CAPEX requests.
• Daily Operations: Responsible for the coordination of meetings and events such as logistics support, obtaining quotations, raising of invoices etc. Conduct regular inspection of the centre to ensure high standard of cleanliness and service are provided by term contractors related to cleaning, landscape, pest control etc.
• Reports: Monitor and report on the work progress of minor improvement projects or A&A work. Tabulate inspection report and plans for defects rectification.
• Project Management: Procurement of services as well as management of services and projects from inception, execution and to completion. Project lead to manage all aspects of project.
• Event Management: To provide audio, visual and media services for events and activities (e.g. Family Day, celebrations, etc). To help staff (hands-on) on setup of technology in the venues.
• Others: provide training to staff and students on the use of AV and lighting equipment, carry out any ad-hoc duties, handyman work, projects as assigned.

REQUIREMENTS

• Minimum diploma in the audiovisual technology, sound engineering, lighting design technology or any related field, such as digital media or related disciplines.
• Demonstrated ability to communicate effectively, including proficiency in clear, concise, and compelling oral and written communication in English.
• Demonstrated ability to work independently and under pressure and to manage multiple concurrent tasks and responsibilities while dealing with changing priorities.
• Possess strong working knowledge with maintenance work, local codes and regulations. Familiar with statutory requirements on building services, facility operations, maintenance, and safety.
• Withstand various strenuous activities such as frequent walking, prolonged standing, climbing ladders, bending, and kneeling without restriction.
• Able to work on rotating shifts, weekends, and public holidays.
• Relevant experiences in facilities management/MCST, ACMV, M&E Systems, building automation system (BAS), Certification as Fire Safety Manager will be an added advantage.

Responsibilities

• Configure and manage infrastructure systems, applications, and network equipment (e.g., Active Directory, data centers, firewalls, VPN, video conferencing).
• Oversee desktops, mobile, and remote devices.
• Ensure automated backups, disaster recovery processes, and system patches, with close monitoring of resource usage.
• Work with external vendors to uphold SLAs.
• Develop and update technical documentation (admin and user guides).
• Support local and international users over LAN/WAN securely.
• Identify suitable products, solutions, and suppliers for project needs.
• Provide L1/L2 support and participate in projects as a lead or team member.

Requirements:

• Diploma/Degree in Computer Science, IT, or CCNA Certification.
• At least 1 year of relevant experience.
• Proficient in enterprise networking (WAN, LAN, VPN optimization).
• Skilled in Microsoft Server (2012+), Microsoft 365, Google Suite.
• Knowledgeable in internet architecture (TCP/IP, DNS, DHCP, Proxy, Firewall).
• Familiar with Alcatel PABX, FortiGate, Cisco, and Unifi Wireless AP Controller.
• Strong understanding of CyberRisk and CyberSecurity; PDPA familiarity preferred.
• Experience with Veeam, VMware, and UNIX/Linux is beneficial.
• Background in API/Web Programming and Database Administration is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• After market sales related promotion to existing customers in Singapore
• Regular " patrol " activity as pro-active maintenance promotion. Patrol / Check machine condition / Report / Service proposal with quotation & manage prospective / secure order / execute maintenance job by team
• Solutioning skills such as Troubleshooting / proper report and action order to the team.
• Compressor system improvement proposals
• Energy saving proposal with existing system diagnosis
• Help up and coordination with Sales & Marketing department. Job task share when the existing customer does machine replacement or expansion / upgrading orders.

Requirements

• Diploma or above in Engineering related academic
• More than 3 years experience in similar industry
• Possess Class 3 Driving License.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to kenneth(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Kenneth Tan Guan Quan

EA Personnel Reg No: R1550240

Responsibilities:

• Perform servicing of chillers & other HVAC equipment
• Carry out corrective and preventive maintenance for chillers and related equipment
• Have basic knowledge of overhaul & start up jobs on chillers
• Liaising with customers to resolve complaints cases
• Coordination with vendors and contractors in job coordination
• Assist or involve in schedule planning & prepare technical analysis reports for management’s review
• Ensure all works carried out in accordance with the specified quality and EHS standards
• Any other duties as deemed necessary from times to times

Requirements:

• NITEC/ Diploma/ Degree in Mechanical, Electrical, Electronic Engineering or equivalent
• Relevant experience in Chiller Systems/ Air-conditioning / BMS / ACMV / HVAC
• Positive attitude

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to kenneth(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Kenneth Tan Guan Quan

EA Personnel Reg No: R1550240

Key Roles and Responsibilities:

Marine Vessel Maintenance & Repair

• Perform regular inspections, maintenance, and repair work on marine vessels, including engines, propulsion systems, electrical systems, and HVAC systems.
• Troubleshoot and diagnose issues with marine equipment, machinery, and systems.
• Carry out emergency repairs and provide solutions to minimize downtime and ensure the continued safety of operations

Technical Support & Problem-Solving

• Provide technical support for complex repairs, ensuring compliance with safety and environmental regulations.
• Work closely with ship crews and offshore teams to address immediate and long-term repair needs.
• Develop and implement corrective actions to improve vessel performance and reduce operational risks.

Documentation & Reporting

• Maintain accurate records of all maintenance and repair activities, includingreports on inspections, repairs, parts used, and time spent.
• Ensure all repair work complies with regulatory and industry standards and is appropriately documented for audit purposes.
• Prepare maintenance schedules and provide recommendations for necessary upgradesor replacements.

Quality Control & Safety Compliance

• Monitor the quality of repair work and ensure all maintenance activities are carried out to the highest standards.
• Ensure compliance with maritime safety and environmental regulations, including adherence to SOLAS (Safety of Life at Sea) and MARPOL (Marine Pollution) requirements.
• Conduct safety checks and recommend improvements to prevent future damage or failure.

Collaboration with Other Departments

• Work closely with the project management, procurement, and logistics teams to ensure timely delivery of parts and services required for repairs.
• Collaborate with vendors, suppliers, and manufacturers for technical support and part procurement.

Training & Development

• Provide technical guidance and training to junior engineers, technicians, and crew members on vessel repairs and maintenance.
• Stay updated with the latest developments in marine engineering technology, repair techniques, and industry standards.

Qualifications & Requirements:

• Bachelor's degree or diploma in Marine Engineering, Mechanical Engineering, or a related field.
• Minimum of 3-5 years of experience in marine repair, maintenance, and troubleshooting of marine vessels.
• In-depth knowledge of marine systems such as propulsion, electrical, mechanical, and safety equipment.
• Stron understanding of maritime safety regulations and industry standards.
• Ability to read and interpret technical drawings and manuals.
• Strong problem-solving and troubleshooting skills.
• Good communication skills and the ability to work in a team environment.
• Must be willing to work offshore or in dry docks if required.
• Certification in marine safety and repair procedures (e.g., STCW, Basic Safety Training) is a plus.

Benefits:

• Competitive salary and benefits package
• Opportunities for career advancement and professional development
• A dynamic and supportive work environment

If you are passionate about marine engineering and have the skills to ensure the safe and efficient operation of marine vessels, we would love to hear from you. Apply today!

Job Description

• Researches, plans, coordinates and proposes original designs of mechanical products and systems. Performs testing of prototype and production equipment.
• Participates in customer and project review meetings relating to project assignments. Reports and presents information as required.
• Analyzes projects work scope to develop and coordinate design/drafting manpower requirements for project demand and scheduling.
• Assists in conceptual customer design proposal, identification of application. Prepares designs and layouts that define equipment concepts, or the basic functional characteristics of systems, components, structures or equipment.
• Leads design staff, on a project basis, in analyzing design alternatives. Suggests design options and prepares layouts illustrating the need of the customer.
• Review complete product layouts, working from detail drawings and sub-assemblies. Prepares and review all levels of engineering calculations.
• Create, check and review TCE and Engineering documentation through the ECN process
• Is responsible for project status for on-time delivery, productivity and quality and safety of design. Reports as required on assigned projects.
• Provide a link with the Product Groups to transfer new technologies or design improvement to the operations
• Follow all TFMC rules and procedures for Engineering, Quality, Environment, Health and Safety.
• Conducts and prepare design reviews
• Conduct SITs
• Goes on field assignments for new products installation and commission
• Provides technical support to manufacturing and marketing

Requirements

• Mechanical engineering degree (minimum honors, masters preferred) or minimum ten years related design/drafting experience within FMC engineering
• Knowledge of TFMC products and manufacturing processes or related experience preferred.
• Ability to perform high level engineering calculations.
• Experience in leading and supporting others in team building and time management skills.
• Skills include design, product knowledge, enabling technology, and computer skills.

Purpose: Responsible for reviewing customer supplied data and drawings; and the creation of manufacturing data, programs, tools, jigs and fixtures required for the manufacture of complex machined parts in the most efficient and safe machining process.

Key Area of Responsibilities:

• Review customer (internal/external) supplied data and drawings to ensure that supplied information aligns with project requirements and standards.
• Create manufacturing data, programs, tools, jigs, and fixtures required for the manufacture of complex machined parts in the most efficient and safe machining process.
• Perform machine simulation for all CNC programs to ensure error-free machining prior to release.
• Create detailed and clear shopfloor documentation such as machining setup sheets and tool list.
• Handle workshop feedback and troubleshoot problems relating to CNC machining, programming, and cutting tools in order to ensure parts are produced according to customers' drawings specifications.
• Manage revision control on the 3D model, drawing, program, tool list, and setup sheet documentation to ensure accurate records and allow all parties to follow the right revisions.
• Drive continual improvement on existing CNC program.

Qualification & Experiences:

• Degree in Mechanical, Precision Engineering, or other relevant discipline.
• Minimum 5 years of working experience in the precision machining industry.
• Knowledge of interpretation of engineering drawing
• Knowledge of designing tools (GD&T)
• Experience with 3D CAD, 3D CAM and simulation software (e.g. NX, and Vericut)
• Technical knowledge of cutting methodologies and cutting tools
• Experience with tool database software, automation, and post-processor development is advantageous.
• Problem Solving and Continuous Improvement

Job Description

• Interpret contract specifications, architectural standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manage budgets; write reports; and carry out additional administrative duties associated with the projects that are allocated
• Oversee architectural planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise and prepare construction and architectural documents and drawings
• Oversee architectural projects, communicate with clients and subcontractors regarding architectural issues, and guarantee the highest levels of architectural workmanship
• Provide the architectural designers with technical guidance on building requirements
• Organize and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in engineering
• Min 3 years of construction experience

Purpose: To create, control and manage changes to customer's Technical Product Data (TPD) packages (Items, Bill of Materials, Product specification documents) in the Product Lifecycle Management (PLM) and Enterprise Resource Planning (ERP) systems. To deploy TPD changes to the relevant Persons-in-Charge (PICs) for execution.

Key Area of Responsibilities:

• Check the correctness and completeness of product packages, such as Technical Product Data (TPD) and Bill of Materials (BOM) received from customers.
• Work with the user of TPDs to define the new TPD requirement and update the ISO document (for new customers or any change in TPD requirement).
• Maintain required customer items, BOM, and TPDs in PLM and ERP systems.
• Create and control the item part number, BOM and TPD in the PLM and ERP systems.
• Create projects in the ERP system for the fulfillment of customer Sales orders.
• Implement Engineering Change Order (ECOs) and deploy the changes to the next inline PIC (such as planner, purchaser, process engineer and Sales & Program dept.)
• Check and ensure all required information for the TPD (items, BOMs, documents) and/or configuration change are provided, and approved by the customer.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Diploma/Degree in Mechanical Engineering/Science or relevant field.
• Minimum 2 years of working as a product data engineer in the semiconductor industry or similar position.
• Proficient in Microsoft Excel functions
• Good communication skills

• Calculated BOQ and invited subcontractor for cost estimation.
• Sourced Quotations and Specifications from suppliers and contractors.
• Collected BQ and arranged cost comparison.
• Attended internal, external meeting.
• Performed site inspection to ensure that work is carried out based on specification and drawing.
• Prepared report and method statement whenever necessary.
• Supervised daily site installation.
• Day to Day management of the site, including supervised and monitored the site labour force.
• Inspected Handover inspection with consultant engineer and client.
• Follow up with clients and handover the project
• Good knowledge civil, Structure and M&E deoartment

Responsibilities:

• Checked technical specifications, M&E drawings and documents.
• Coordination of drawings with clients, main contractors and updating of drawings base on meetings and discussion.
• Produced M&E Services design drawing including electrical system and ELV system, Fire Protection system, Plumbing and waste, etc.
• Performed draft detailed for M&E shop drawings, as built drawings and standard detail and SLD drawing, Layout, Schematic based on preliminary concepts, sketches, calculation, specification sheets and other data.
• Provided technical support and assistances to project manager and engineers at every project stages.

Purpose and Scope

You will provide mechanical maintenance works to support the operations of the Energy from Waste plant.

Key Roles and Responsibilities

• Plan and schedule corrective and preventive maintenance works. Include liaising with operations, prioritize jobs, mobilize work force, spares and allocate resources
• Lead technicians in implementing in preventive and corrective maintenance
• Trouble shoot critical or major plant issues, participate in Root Cause Analysis (RCA) studies, plant improvement initiative, and drive cost management.
• Implement management initiatives to optimize the assets and seek to continuously improve on the methods, procedures and update with the latest developments in the market by adopting a suitable approach like proactive initiatives viz predictive and preventive maintenance activities and default actions like failure finding, redesign and run to failure
• Review budget, monitor spending against budget. control cost
• Upkeep risk registers, take part in safety walkdowns, implement safety initiatives, and ensure that good safety practices are practiced by all parties’ maintenance work
• Develop and establish maintenance procedures, risk assessment and method statements for all maintenance activities to ensure safe execution
• Ensure that maintenance works, and plant equipment comply with Statutory Requirements
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)
• Other ad-hoc duties as assigned

Qualification, Skills and Experience

• Degree in Mechanical engineering
• Minimum 3 years’ experience in a Power Plant environment or oil & gas industry
• Organized and detail oriented
• Good Team player and able to deliver results within tight deadlines
• Strong interpersonal, communication and presentation skills
• Proactive in keeping up with new technologies and looking for solutions to optimize plant operations
• Independent with initiatives, resourceful and positive altitude
• Possess good leadership skills
• Good attitudes and willing to learn from experienced people
• Willing to conduct literature researches for problem solving and carry out root cause analysis

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Coordinating with the client and attending client meeting whenever required
• Supervise and coordinate with team to produce deliverable per schedule and quality
• Administrative role of 3D modelling process with AVEVA software
• Review and comment on various engineering documents
• Design & incoporate structural components of project into AVEVA 3D model and produce 3D structural models
• Multi-discipline design coordination to avoid & correct interferences in AVEVA 3D model
• Prepare construction drawings (2D Structure drawings, bending template, profile nesting, plate nesting and material list) utilizing AVEVA Marine Drafting
• Modelling of Equipment and Outfitting in AVEVA
• Extraction of Outfitting General Arrangement from AVEVA
• Prepare a wide range of engineering related documents such as plot plans, Key plan
• Extraction of Piping layout and Piping General Arrangement from AVEVA
• Extraction of Isometric drawing with MTO and Line list
• Data consistency and Clash checking in AVEVA
• Prepare support drawings
• Checking the piping and other discipline documents as per shipyard payment
• Perform 3D Modelling of Electrical equipment and cable tray/ladder, supports and instruments in AVEVA
• Preparation of 2D deliverables (lighting layout, wiring diagram, equipment layout, interconnection diagram, cable tray/ladder layout, cable tray/ladder fill report and MCT layout)