JOB DESCRIPTION

Responsibilities:

• Ensure proper risk assessment is in place to provide a safe working environment for workforce by periodically reviewing risks and hazards associated to workplace, executing control measures and communicate effectively to workforce.
• Respond to technical queries from subordinates to account for timely project completion by consulting relevant parties such as mould loft and engineering department for practical solution.
• Monitor quality of welding and NDT completion on end products to prevent carry over work to next station by preforming on site checks and reviewing NDT records.
• Set daily targets for workforce to achieve to account for timely project completion by monitoring daily output and conducting daily reviews of the results.
• Study production drawings to spot possible mistakes or possible fabrication issues to ensure production schedule can be met without unexpected delays by detailed discussion and review of drawings with technical staffs.
• Prepare weekly report on progress and KPI to ensure project progress in on track by monitoring block status and compiling production progress data from site.
• Identify bottlenecks to ensure no unexpected delays to project progress by conducting meetings with subordinates, analyzing weekly reports and formulate optimal production flows for any issues identified.
• Review manpower allocation and effectiveness to ensure project progress is on track by analyzing daily and weekly KPI against progress, discussing with managers should additional manpower or reallocation of manpower is needed.
• Performs supervision on site to ensure fabrication work have been safely executed accordingly to drawings and quality requirements to account for timely project completion by checks on the floor, communicating and getting feedback from workforce.
• Identify the production capacity and plan station schedule to ensure accordance to sequence by comparing to hullshop master schedule and hullshop historical productivity data.
• Set the KPI and manpower allocation for each station to achieve required schedule by analyzing workforce and facilities capabilities and historical date and previous projects.
• Study project requirements, identify any gap that exists with current hullshop practices and propose recommendations to close the gaps to ensure no unexpected delays to project schedule by conducting reviews and meetings with QA and QC personnel.
• Ensure Standard Operation Procedures (SOP) in place so that work can be performed according to project requirements by communicating SOP's to workforce.
• Determine block fabrication sequence to ensure most effective way to fabricate blocks by analyzing drawing and 3D model and holding discussion with production and mould loft team.
• Ensure proper lifting plan is available for blocks to account for safe block lifting by advising engineering lifting team on block fabrication method in advance.
• Review subordinates competency to ensure effectiveness in performing work by analyzing productivity data, non conformance received and feedback from QA, QC and clients.
• Take active role in Incident Investigation to find root cause and proper preventive measures are implemented by conducting interviews with injured person(s) and witnesses, analyzing accident scenes and other investigative processes together with HSE Team.
• Propose training required by workforce to prevent shortfall in certain roles by compiling workforce skills and comparing with production requirements.
• Participate in Safety Innovation Programs by actively contributing to department Safety Innovation Team

JOB REQUIREMENTS

Requirements:

• Degree in Engineering
• At least 3 years of relevant working experience, preferably in marine/ offshore industry
• Knowledge of functional and operational requirements related to design of all types of ships and offshore vessels
• Knowledge and experience of his engineering field
• Knowledge of regulatory and class requirements
• Able to read and understand engineering drawings
• Possess good communication and interpersonal skills
• Possess supervisory skill to coach and motivate staff
• Able to work in a team
• Proficient in Microsoft Office and engineering design software (e.g. Tribon, GEMS)

Seatrium - Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Project Management

• To resolve all technical and non-technical issues.
• To ensure the tracking and monitoring of items per contractual requirement.
• Responsible for submission and monitoring of technical drawings, method statements and proposals.
• To ensure construction meeting client & regulatory requirements.
• To carry out short-term planning to meet site progress.
• To co-ordinate, program and monitor site work, materials, plant & equipment.
• Carry out project objectives to align with company goals.
• Reduce material wastages on site and maximise usage of machineries/equipment.
• To control the allocated direct workforce effectively i.e. no. of direct workers and overtime etc.
• Follow approved construction method that is cost effective, productive & without compromising on Quality.
• Meet targeted progress of works so as to achieve the intended cash flow.

Technical Understanding

• Understands the drawings and scope of works
• Understand the implications of different technical choices so as to meet the project objectives.
• Involving in providing value engineering solutions basing on his knowledge.
• To have knowledge in the preparation of engineering project proposals and method statements.

Job Requirements

• Candidate must possess at least Degree in Engineering (Civil) or equivalent (Recognized by PEB).
• Experience in leading a team or subcontractors would be advantageous.
• Strong communication skills.
• Highly committed and motivated individual.
• Versed in PUB(WRN) projects with more than 5 Year(s) of working experience in the related field is an advantage.
• Candidate with comparable qualification will be considered for Project Manager post.
• Fresh graduates are also welcome to apply.

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Job Responsibilities

• Responsible for developing all electrical, controls, instrumentation documents and specification for the project.
• To carry out electrical, controls and instrumentation related detailed design and preparation of drawings and datasheets
• To interpret and interface with other engineering discipline documents like P&ID, GA, client control and instrumentation systems
• To check and review all electrical, controls, instrumentation related drawings and documents from suppliers and vendors.
• To liaise with clients, consultants, sub-contractors and OEM to resolve technical issue at site and in office.
• To interface with engineers of other disciplines within the engineering department.
• To prepare procurement support including evaluation of technical and commercial bid from vendor and supplier.
• To provide engineering support in tendering of new projects such as preliminary design, material and cost estimates etc.
• To provide technical support to project team for on-going projects and resolve any technical issue on site.

Job Requirements

• Degree or Diploma in Controls, Electronics and Electrical Engineering.
• 3 years relevant experience required for Senior position
• Knowledge of SCADA, PLC and other instrumentation systems will be an advantageous
• Experience in design and drafting of LV and HV systems.
• Familiar with Electrical Installation works and international electrical codes and standards.
• Knowledge in MS, Autocad, Programming languages will be advantageous
• Strong analytical, communication and presentation skills.
• A self-motivated team player with a high level of creativity and initiative.
• Willing to travel occasionally.
• Able to work independently in a flexible, dynamic and fast-paced environment.

Engineer/Assistant Engineer (Software Programmer)

-Knowledge in electrical schematics

-Knowledge in PLC Programmer, SCADA and HMI

-Experience with Omron, Keyence, Siemens and/or Allen Bradley

-C/C++ knowledge would be advanage

-Have interest in Programmer,creative in HMI Design

-Ability to Travel Overseas at short notice

Responsibilities

- Manage and analyze yield for new product off-loads and qualifications.

- Collaborate with customers on product correlation, qualification runs, design and optimization of test process and test program improvements.

- Develop and maintain test programs / hardware for Wafer Sort and Final Test.

- Prepare engineering reports and conduct technical reviews with customers.

- Develop and transfer test solutions for Wafer Sort and Final Test to production.

- Provide engineering support to Test Operations in productivity improvement

- Participate in manufacturing activities to enhance test processes and flow specifications, minimizing downtime and optimizing productivity.

Requirements

- Degree in Electronics Engineering or a related technical field.

- Minimum 2 years working experience in similar capacity preferred, fresh graduates are also welcome to apply.

- Knowledge of programming languages is an advantage.

- Experience in product testing and software / hardware debugging is beneficial.

- Possess project management, analytical, and problem-solving skills.

- Positive attitude with excellent communication and interpersonal skills.

• Prepare quality reports, perform process audit, develop & implements quality assurance standards, policies, processess & controls.
• Able to liaise & resolve with customers on quality related issues.
• Data compliation, co-ordination and facilitation of all internal and external audits, re-certification of ISO 9001.

COMPANY DESCRIPTION

We are one of the largest one-stop Underground Utilities Infrastructure companies based in Singapore. We provide Underground Utilities Infrastructure construction and maintenance, sewer pipeline rehabilitation, road and airfield construction and maintenance as well as asphalt pre-mix production and construction waste recycling.

RESPONSIBILITIES

• Assist the Project Manager with daily project activities, including coordination, scheduling, planning, and implementation of work.
• Conduct regular site inspections to ensure construction activities are carried out in compliance with approved designs, contract specifications, safety standards, and quality requirements.
• Provide recommendations for corrective actions when deviations from the project scope, schedule, or quality occur.
• Serve as the point of contact for clients, consultants, authorities, and internal teams, ensuring effective communication of project progress, specifications, and any challenges.
• Review project proposals and plans to align project objectives with management expectations, ensuring performance criteria and client needs are clearly understood and incorporated.
• Oversee project timelines and milestones, proposing adjustments and modifications to the schedule as needed to ensure timely delivery.
• Assist in the achievement of team goals by actively contributing to relevant tasks and maintaining a collaborative work environment.
• Liaise with clients to coordinate project plans, schedules, and deliverables, ensuring alignment with client expectations and project requirements.
• Prepare and submit all necessary documentation, including method statements, risk assessments, progress reports, monthly reports, and other key project documents.
• Prepare and submit monthly progress claims in a timely manner, ensuring accuracy and completeness.
• Perform other duties or tasks as assigned by immediate superior or Head of Department.

• Degree in Civil Engineering recognized by Singapore Professional Engineers Board (PEB)
• Minimum 3 year of experience in constructions or civil engineering
• Those with experience in underground utilities especially cable pipes will be advantageous
• Possess excellent interpersonal and communication skills
• Service-oriented client relationship and people
• Self-motivated and able to work independently
• Preferably possess a valid Class 3 license

• 6 days work week
• Preferably possess a valid Class 3 license

Other Benefits

• Enjoy a company-provided shuttle for easy transportation to and from the office, including lunch trips.
• Free access to medical teleconsultation services for your convenience.
• Portable Medical Benefits Scheme (PMBS). Enjoy an additional monthly contribution directly to your Medisave account.
• Comprehensive Medical Benefits. Includes coverage for dental care and health screening through the company's provider.

Why Join Us

• Dynamic Work Environment: Thrive in a fast-paced, ever-evolving workplace that offers new challenges and opportunities every day.
• Varied Responsibilities: Take on diverse and exciting tasks that keep your role engaging and fresh.
• Collaborative Team Culture: Join a team that values open communication, efficiency, and a strong commitment to security.
• Growth and Development: Benefit from a supportive environment with ample opportunities for professional growth, skill development, and career advancement.

Requirements:

Minimum - bachelor’s degree in civil engineering

Job Description

1. Experience in Civil Engineering Design works in the area of;

- Structural Steel design

- Reinforced Concrete design

- Geotechnical Engineering Design

4. Able to work under rushing schedule of works

5. Able to do AutoCAD drafting (if required)

6. Familiarize with preparation of Authorities Submission documents (BCA, URA, JTC, etc..)

7. Able to communicate with clients and Authorities

Job Description

· Procurement and sales

· Source & procure equipment/ components/ spares, etc.

· Vendor evaluation and registration

· Prepare purchase requisitions

· Price negotiations

· Prepare sales contracts

· Prepare shipping documents

· Management of supplier and client relationships

· Resolve issues related to requirements, substitutions, damages, quality, delivery and other important terms and conditions.

· Ensure accurate and timely payment for invoices

· After sales service

Job Requirements

· Candidate must possess a Diploma in Engineering or Business Admin with at least 5 year(s) of relevant experience in Marine/ Shipyard.

· Strong communication negotiation and interpersonal skill

· Bilingual in English and Mandarin

· Proficient in Microsoft Office applications (Outlook, Excel, Words and Powerpoint, etc.)

• World-leading provider of cargo and load handling equipment (MNC)
• Basic $4,000 - $6,000
• Allowances + OT payable
• Office location: Jurong East-International Business Park

Responsibilities

• Steel Work Supervision: Supervise structural steel repairs, including welding, fabrication, and modifications on RoRo vessels, container vessels, and bulk carriers, ensuring compliance with industry and safety standards.
• Maintenance: Perform preventative maintenance, corrective actions, and upgrades equipment, including RoRo ramps, doors, and hatches.
• Inspections: Conduct thorough inspections of steel structures and mechanical systems to ensure compliance with safety and quality standards.
• Project Management: Lead and manage subcontractors during larger steel repair projects, ensuring the work is completed on time and within budget.
• Customer Support: Establish and maintain excellent relationships with internal and external customers, providing technical support and feedback to the relevant teams.
• Safety Compliance: Adhere to all Quality, Health, Safety, and Environmental (QHSE) standards and site-specific safety protocols.

Requirements

• Min with technical qualification in steel fabrication, marine or other relevant engineering fields.
• Min 2-3 years working experience in supervising steelworks or marine industry.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

Job Responsibilities:

1. Assisting and supporting technical sales team in terms of scope of supplies and costing with respect to electrical, automation requirements during the prospecting stage for water/wastewater related systems and projects.
2. Liaising and communicating with agents/distributors/OEM partners/end-user customers on technical details and specifications of parts and components where EICA works are concerned.
3. Design and producing electrical, control panel drawings (AutoCAD or Eplan), BOM list generation and hardware component selection.
4. Developing PLC programming & HMI project (Siemens /Allen Bradley etc) for all process and functional controls of water/wastewater related systems and instrument.
5. Liaising, negotiating, and managing sub-suppliers/sub-contractors in Singapore and in the region with respect to procurements of all wiring and cabling works, fabrication and assembly of control panels for systems as well as for in-situ installation of water/wastewater related systems or projects.
6. Determining and monitoring procurement and production progress and schedules where cabling and wiring works, control panels’ PLC works and supplies are concerned.
7. On site electrical installation supervision, electrical panel testing, instrumentation configuration, loop test and automation commissioning works.
8. Compiling and handing over operation and maintenance (O&M) manuals (electrical and PLC portions etc) to our agents/distributors and end-user customers.

Requirements:

• Diploma / Degree in Electrical Engineering or Computer Science.
• Good Interpersonal relationship and communication skills with proficiency in spoken and written English.
• Minimum 5 to 8 years of working experience in Water Industry or engineering projects would be advantageous.
• Knowledge of PLC programming (Siemens /Allen Bradley etc)
• Willingness to travel locally or to regional countries occasionally for site installation, trouble-shooting or testing and commissioning duties at clients' project sites
• Able to work independently and a good team player.
• Senior position will be considered for candidates with more experience.
• Candidate who are able to start work within short notice or immediately would be advantageous.

JOB RESPONSIBILITY

• Find tender opportunities GeBIZE.

• Prepare Tender and submission.

• Familiar with reinstatement and maintenance work.

• Review and analysis of Tenders Drawings & Documentation.

• Preparing Tender submissions and reviewing Procurement & Reviewing of Contracts, and ensuring compliance.

• Reviewing and commercial management of all projects, to ensure accurate and reliable reporting.

• Review all incoming correspondence from Clients, Consultants & Design Team to identify contractually critical items and to initiate replies.

• Estimating a range of projects in a variety of sectors.

• Improve and implement best practice commercial processes and accurate budgeting.

• Maintain accurate records and provide necessary detailed backup to support commercial tracking and costing.

• On Site measurement of Electrical Services.

• Preparation of specialist sub-contract work packages.

• Preparing monthly Commercial Progress reports.

• Other ad-hoc duties assigned by Construction Manager.

• Marine & Offshore industry
• Basic $3000 - $4200
• 5 days (8.30am – 6.00pm)
• Location: West Area
• Transport provided from Jurong East, CCK, Serangoon, Bishan

Responsibilities

• Design control systems
• Preparation of drawings for customer approval
• Preparation of drawings/BCM for shop floor production
• Co-ordinating with clients, consultants and internal department.
• Drafting work with use of CAD system (AUTOCAD/SOLIDWORKS).

Qualifications

• Min Diploma/ Degree in Electrical with no working experience are also welcome.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

Job Responsibilities:

• Supervise all engineering works, restricted activities civil, architectural, electrical and mechanical works carried out by the Contractors/SWCs etc
• Liaise with QP(s) for technical issues and coordinate the site activities with subcontractors
• Overall project planning, scheduling, monitoring and updating to meet project completion targets
• Daily site activities planning, preparing work breakdown, daily site operations, site coordination, monitoring and report work progress.
• Attend all meetings with Stakeholders such as Authorities, Subcontractors, etc
• Prepare Monthly Progress Report
• Ensure site safety and compliance to Authorities' requirements

Requirements:

• Candidate must possess at least Bachelor's Degree in Civil Engineering Recognised by the PE Board
• At least 5 Year(s) of working experience in construction of civil and structures for LTA/MRT Projects
• Availability for Night Shifts: Candidates must be able to work during night shifts.
• Required Skill(s): Registered engineer
• Preferably Senior Executive specialized in Engineering - Civil/Construction/Structural or equivalent

The Service Engineer is responsible for carrying out after sales field service jobs including testing & commissioning, servicing, troubleshooting and overhaul of Ingersoll Rand’s air compressor at our installed bases. He/she will require technical knowledge of compressed air systems, customer orientation and strong ownership mindset to be successful in this role.

Responsibilities

• Perform installation, inspection, diagnose, maintenance and rectification on compressed air system at various commercial and industrial establishments.
• Conduct site and classroom training to customers on compressed air system.
• Recommend necessary actions to improve the efficiency and reliability of customer’s compressed air system.
• General service report writing for internal and external customers.
• Document and prepare field service quality reports. If there are quality problems, it is necessary to feedback specific product defects to the production department and assist customers to take corrective measures.
• Provide technical support for the Industrial Technologies & Services (ITS) products, including but not limited to Compressed Air System, Air Dryers System, Air Audit and IIOT system.

Basic Qualifications

• Degree in Mechanical/Electrical Engineering with strong field service experience in compressed air systems and PLC panel programming or related.
• Singapore Class 3 driving license.

Travel & Work Arrangements/Requirements

Office & Site-based within Singapore for field service jobs at installed bases.

Key Competencies

• Customer Orientation
• Ownership
• Independent
• Basic software applications such as Microsoft Office (e.g., Excel, Word, Outlook) and corporate systems (e.g., SAP).

What we Offer

• Equity Grant
• Employee Insurance
• Medical Health Screening
• Outpatient Medical & Specialist
• Dental
• Overtime & Allowances

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Supporting project communication systems Installation, Configuration, Integration and Testing at customer site to ensure timely project delivery.
• Working closely with subcontractors to ensure tasks on site are completed on schedule.
• Understanding the system and be able to perform system fault isolation and troubleshooting.
• Collaborating with fellow engineers / engineering team in system setup, system validation and problem resolution.
• Supporting the generation of project documentation

Requirements

Primary Work Location: Jurong East Hub

Working Hours : 8.30am – 6pm

Qualification : Diploma in Mechatronic, Mechanical, Electrical & Electronic

Job Summary

The Sales Engineer will be based in Singapore and is accountable to generate profitable sales revenue and increase operating income by broadening sales coverage, establishing new accounts, and providing total solutions for compressed air to customers in Singapore.

Responsibilities

• Identify and source new clients and business prospects (e.g., perform outreach to cold leads via calls and emails).
• Achieve sales target set for area of responsibilities and industries by building and maintaining close relationships with customers (incl. customer visits) to solicit for orders.
• Negotiate tender, contract terms and condition and prepare Sales contract.
• Prepare sales report, analysing cost and sales, quotations and maintaining and creating new client accounts.
• Provide pre-sales technical assistance (incl. demonstration & technical presentations), product training and after-sales support.
• Attending trade shows, conferences, marketing, and other events.
• Work closely with supply chain management, sales support and project engineer and order fulfilment team.

Basic Qualifications

• Degree / Diploma in Mechanical Engineering or related fields.
• Sales experience with industrial products such as Air Compressors, Dryers, or other similar industrial equipment.

Travel & Work Arrangements/Requirements

Office-based, will be required to travel within Singapore to meet clients or overseas for business needs.

Key Competencies

• Customer Orientation
• Ownership
• Business Awareness

What we Offer

• Commissions
• Equity Grant
• Employee Insurance (Incl. Dependants)
• Medical Health Screening
• Outpatient Medical & Specialist
• Dental
• Annual, Sick, Hospitalisation, Marriage, Exam, Compassionate, Maternity, Volunteerism Leaves.

Help us get ahead of disease together with our GSK Biologics Tuas Business Area

Education required: BS degree from an accredited college/university, preferably in Mechanical or Chemical Engineering discipline with a focus in Process equipment reliability and maintenance

Language requirement: Written and spoken fluency in English

Expected Start date: Immediately

Application deadline: We will close this vacancy when we have enough applications, so please apply as soon as you can so your application can be considered.

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals

What will you do?

Involve in and not limited to:

Maintenance and Calibration Project, Improvement in process reliability, Equipment troubleshooting, Qualification of new equipment, SOP amendment due to periodic review/CAPA and Continuous improvement Programme.

What will you learn?

You will be expose to but not limited to:

• The different type of equipment that are used for Vaccines manufacturing.
• How the equipment functions and the impact of each equipment have on the production system.
• Liaising with external contractors and vendors for equipment issues and projects.
• Liaising with above site (GSK sister plant outside Tuas) for sharing issue or requesting for support.
• Working closely with quality and production department on understanding problems that are contributed by process equipment.
• Understanding and using the different type of modules in SAP for routine and ad-hoc activities.
• Deeper understanding the requirements of a Vaccines site on producing vaccines.

What are we looking for?

• A lively interest in vaccines manufacturing, the commercial world and the biopharma industry
• Appetite to work as a business partner, building strong relationships with key stakeholders
• Adaptability to change and working under pressure
• Excellent communication skills that help you influence
• Strong problem-solving skills driven by curiosity
• Drive and confidence to trust your own judgment
• Great project management skills and the ability to prioritise

What do we offer you?

• Understand and experience the GSK Culture
• Work with a diversified team of professionals
• Implement technical knowledge and skills that you have acquired at school
• Apply and develop soft skills such as interpersonal, communications and negotiation skills
• Transport to and from site to MRT stations in centralised locations all across Singapore (only for manufacturing sites)

We are seeking an Assistant Marine Engineer (Shore-Based) to support the maintenance, repair, and operation of marine systems and equipment. You will assist in coordinating technical services, overseeing compliance with maritime standards, and ensuring vessel readiness from a shore-based perspective.

Key Responsibilities:

• Assist in planning and supervising maintenance and repair activities for vessels.
• Monitor and ensure compliance with maritime regulations and safety standards.
• Conduct technical inspections and troubleshoot marine systems as needed.
• Coordinate with vendors, suppliers, and ship crews for timely parts procurement and service.
• Prepare technical reports and documentation on vessel performance and maintenance.

Requirements:

• Bachelor’s degree in Marine Engineering or equivalent.
• 5-10 years of experience in marine engineering or a related field (shore-based experience preferred).
• Knowledge of maritime regulations and safety standards (e.g., IMO, SOLAS).
• Strong problem-solving and communication skills.
• Proficiency in using technical software and tools relevant to marine engineering.
• Willingness to travel occasionally for inspections and project oversight.

Job Description

• Oversee in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc.
• Manage ACMV design coordination with other trades with BIM coordination.
• Liaise with ACMV suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for ACMV equipment and materials to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required.
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based ACMV experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in ACMV calculations including heat load, pump sizing, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more.
• Experience of design and coordination skill.
• Familiar to ACMV, Green Mark and fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage.

A quantity surveyor may work for either the client, the contractor or sub-con, working in an office or on site. They are involved in a project from the start, preparing estimates and costs of the work.

When the project is in progress, quantity surveyors keep track of any variations to the contract that may affect costs and create reports to show profitability.

Aside from Quantity Surveyor, he or she will also act as project engineer wherein will take charge of the suprvising the project, adhere to construction procedures, coordinate all work schedule with the main con and liase with project manager and archi coordinator.

He or She should monitor and ensure that the work progress is within project schedules and manage the project independently as well as lead and motivate team.

Estimation of quantities, preparing BOQ, BBS as per drawing.

• Coordinating with Design & Construction team.

• Review engineering drawing and specifications and ensure the correctness of transfer of drawing details to ground, Checking all centering and reinforcement works.

• Physical measurement of quantities and tracking the productivity.

• Ensuring timely resource availability.

• Undertaking cost analysis for repair and alteration done by customer in project work.

• Evaluating completed work and arranging payments

• Ensure quality of structure, works as per drawing and specifications & ensure no rework

• Analyzing outcomes and writing detailed progress reports.

• Preparation of Daily, Weekly and Monthly reports and submitting it to the Management

• Degree/ Diploma/ Certificate in electrical & electronic engineering (AC & DC motors, lead acid & lithium batteries, electrical control circuits)

• years of hand on troubleshooting experience

• customer support experience

• ability to work as part of a team and possess strong communication skills

• local driving licence is a plus

Job Description

• To participate in the development of a large-scale web application using Microsoft .NET Framework and SQL Server.
• Understands functional requirements from stakeholders and business analysts, and perform impact analysis.
• Develop, unit testing and system integration testing of the application components.
• To support code merging, code compilation and deployment to Development, UAT and Production environments.
• Provide and update software documentation.
• Provide operational support for existing systems by investigating reported issues and resolving them.

Requirements:

• Degree in Computer Science or relevant.
• Minimum 2 years working experience in software development using .NET 4.5, C#, ASP.NET, T-SQL using SQL Server 2012 and onwards.
• Have experience in end-to-end software development life cycle.
• Knowledge in web front-end technologies such as CSS, JavaScript, JQuery, etc.
• Knowledge in code version control process and continuous integration process are required.
• Strong analytic skills and problem-solving skills are required.
• Good interpersonal skills and ability to work in a team-oriented, collaborative environment.
• Good written and verbal communication skills in English.
• Knowledge in Java and Oracle is preferred, but not required.
• Candidates with longer and relevant working experience may be given senior roles.
• Candidates with experience in technical architecting and design may be given lead roles.

NOTE:

By submitting your Curriculum Vitae (CV)/Resume, you agree to your data being used in conjunction with recruitment and employment purposes.

In order to maximize your opportunities to work with us, you are encouraged to keep the information provided accurate, complete and up-to-date.

Our Data Protection Notice for Job Applicants is attached here:
https://www.secur.sg/dataprivacy/data-protection-notice

We DON'T collect any of the following:
1) NRIC/FIN
2) Photo
3) Date of Birth
4) Age
5) Spouse/Family information