Electrical PLC Engineer

1. Experienced Electrical Design Engineer For HVAC System
2. Report to Engineering Department Electrical Manager.
3. Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT.
4. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel, Include Chiller Unit, Air Condenser Unit, AHU, Cold Room Provision Plant by use Auto Cad software.
5. Issue Documentation for Electrical & Instruments. Include Block Diagram, Control Philosophy, Cause & Effect Control Philosophy, Power Loading List, FAT testing procedure, Control Panel General Arrangement Drawing, Junction Box Drawing.
6. Choose electrical element and Instrument based on project requirement.
7. Use Siemens S7-400 PLC to do the HVAC System PLC program. Experience in CPU Redundancy, Modbus Communication Redundancy.
8. Use S7-1200 PLC to do the HVAC Control System PLC program
9. Use Siemens HMI software to do the Touch Screen Program.
10. Fully understood HVAC System D & ID, P & ID.
11. Marine and Offshore commissioning experience are required.
12. Sometimes will go to site trouble shooting.
13. Contact with client about the project requirement.
14. Contact with supplier about the control panel, Electrical Component and Instrument requirement.

Electrical Engineer

1. Experienced Electrical Design Engineer For HVAC System
2. Report to Engineering Department Electrical Manager.
3. Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT.
4. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel, Include Chiller Unit, Air Condenser Unit, AHU, Cold Room Provision Plant by use Auto Cad software.
5. Issue Documentation for Electrical & Instruments. Include Block Diagram, Control Philosophy, Cause & Effect Control Philosophy, Power Loading List, FAT testing procedure, Control Panel General Arrangement Drawing, Junction Box Drawing.
6. Choose electrical element and Instrument based on project requirement.
7. Fully Understand PLC control system.
8. Fully understood HVAC System D & ID, P & ID.
9. Marine and Offshore commissioning experience are required.
10. Sometimes will go to site for trouble shooting.
11. Contact with client about the project requirement.
12. Contact with supplier about the control panel, Electrical Component and Instrument requirement.

Responsibilities:

• Lead RTL design, simulation, and verification for company ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Assist Project Manager with project functions, including project management, site management, and risk control to achieve project goals.
• Support Project Manager in planning and coordinating construction works according to the master and detailed work programs.
• Guide junior Engineers in daily work execution.
• Prepare and submit project documents such as schedules, method statements, design plans, risk assessments, and reports.
• Supervise construction to ensure compliance with contract specifications, drawings, quality standards, and ESH practices.
• Coordinate and liaise with clients, authorities, consultants, subcontractors, and suppliers on all project matters.
• Facilitate site inspections, submit technical reports, and maintain records. Assist in verifying progress payments and contractor claims.
• Attend regular meetings with clients, consultants, and contractors to monitor project progress.
• Establish and maintain a document control system for design drawings and project documents.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 3 years of working experience in construction and infrastructure industry (LTA, Roadwaorks, MRT Projects).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

• To carry out scheduled maintenance and attend breakdown service call for installed BMS/Security/ELV System

• To carry out A&A work

• To provide technical and engineering support

• To co-ordinate with relevant parties to ensure the work is carried smoothly

• Ad-hoc duties as assigned

Job Requirements:

• Diploma/Degree in Mechanical, Electrical or Electronics Engineering

• Candidates without experience will be considered

• Preferably with experience in BMS or ELV

Other info:

· Company specializes in integrated automated systems

· Salary $2500 - $3500

Interested candidates, pls apply with resume in MS Word format

You may email to [email protected]

EA License No: 17C8809

EA Reg No: R1108561

Job Description

• Lead and manage a team of Sub-contractors for all addition and alteration (A&A) work
• Plan, organize, co-ordinate and implement A&A work timely and ensure compliance to all authority and client's requirement
• Liaise with sub-contractor and vendor for quotations and purchase orders
• Evaluate project requirements and generate feasible proposals for work completion
• Liaise with client's appointed officer on all issues related to the A&A and project work
• Preparation and submission of shop drawings, point schedule, materials, write-ups, and other necessary items for approval
• Track and manage project progress and submit progress claims
• Lead, coordinate, and execute testing & commissioning works for A&A works with proper documentation
• Conduct site surveys, attend meetings on-site, evaluate installation progress on-site
• To arrange and provide servicing & maintenance works for active sites

Requirement

• Diploma/Degree in Mechanical Engineering or Electrical Engineering or any related discipline
• At least 1~3 years of working experience in construction or retrofit project in BMS/ACMV/Electrical/ELV
• Good knowledge of Building Services (BMS, ACMV or Electrical or ELV) and project management
• Proactive individual who can work independently
• Good interpersonal and Communication skills
• Able to multi-task and achieve deliverables on schedule
• Able to generate project reports via Word, Excel, Powerpoint

We regret only short listed candidate will be notified.

Project Design & Engineering Calculations and Proposal drawings to Client.

Preferable 2D & 3D knowledge in AutoCAD & Autodesk Inventor or Solid Works

Reverse Engineering as Equipment sample or Site measurement studies

Inspect and review projects to monitor compliance with safety codes, and other regulations.

Prepare contracts and negotiate revisions, changes and additions to contractual agreements with Engineering approval from Authority, consultants, clients, suppliers and subcontractors.

Schedule the project in logical steps and budget time required to meet deadlines.

Site & office project management and daily operations including Engineering Design, Drawing and Fabrication, inspections, site measurements and handover to client’s.

Attend Site meeting, Equipment rectification in assembly and dismantling when required.

Overall project planning, scheduling, monitoring, and updating to meet project completion targets.

Liaison and meeting with client's representatives, relevant authorities, and consultants.

Site co-ordination, monitoring and report work progress.

Flair in design; able to sketch fast and produce good design concept

Coordinate all new and current on-going projects and able to communicate well with all levels

Review M&E Design Drawings and ensure compliance with design specifications and guidelines. Identify discrepancies between M&E, Structural, ID, Architectural and Client provisions.

Review incoming engineering, ISO piping drawings and assess impact of extra work or changes on schedule.

Ensure all regulatory and statutory requirements regarding testing and record keeping are met.

Supervise and coordinate M&E and Mechanical piping/equipment installation in accordance with approved drawings and materials. Coordinate M&E details with Clients, Consultants, Sub-contractors and other site staffs.

Monitor performance of multi-skilled craft workers in the installation, removal, or adjustment of equipment or components in accordance with established project procedures, requirements and specifications.

Monitor construction schedules, methods, manning charts, materials and equipment requirements.

Establish effective communications with the Client's field representative, through discussions, and such other arrangements as are required to maintain close working relationships.

Supervise electrical and instrumentation construction work as per IFC drawings.

Monitor construction schedules, methods, manning charts, material and equipment requirements.

Monitor the activities of contractors and subcontractors performing craftwork, ensuring compliance with project quality, safety, and security requirements.

Min 5-7 years’ of experience in Engineering related activities in Mfg, Recycle, Oil & Gas and Chemical plant industry.

Responsible for safety of supervised personnel; ensures that craft personnel comply with established safety policies and procedures, and that they practice safe work habits.

Applicable only for Singaporeans / PR's

Project Design & Engineering Calculations and Proposal drawings to Client Management.

Preferable 2D & 3D knowledge in AutoCAD & Autodesk Inventor or Solid Works

Reverse Engineering as per Equipment sample or Site measurement studies

Analyse sub-contractor proposals, design and calculation feasibility study.

Coordinate with Government and various agencies.

Inspect and review projects to monitor compliance with safety codes, and other regulations.

Manpower planning, deployment and control and on-time schedule.

Coordinate to resolve engineering and construction issues and manage the schedule.

Safety mindset and ability to develop RA and permit to work application.

Maintain proper project documentation and ensure accuracy of all design submissions to comply with project specifications and clients’ requirements.

Monitoring of site activities, material requisition, cost control, project supervision and schedule of works

Ensure that works are executed within an acceptable standard of workmanship and in line with safety procedures

Understand and ensure compliance in project requirement and scope of work

Issuing of material requisition form, assist in purchasing materials/items required by production/customers, prepare marketing material & etc.

Prepare contracts and negotiate revisions, changes and additions to contractual agreements with Engineering approval from Authority, consultants, clients, suppliers and subcontractors.

Establish effective communications with the Client's field representative, through discussions, and such other arrangements as are required to maintain close working relationships.

Any adhoc duties as assigned by management.

Min 3-5 years’ of experience in Engineering mfg, Recycling, Oil & Gas and Chemical plant industry.

Applicable for Only Singaporeans & PR's.

Job Description:

Are you ready to revolutionize the future of water and wastewater treatment systems while enjoying flexibility in your work environment? Join our innovative team and make a difference in shaping sustainable solutions for various industries. As a valued team member, you will:

• Contribute to the design of cutting-edge water and wastewater treatment systems throughout the tendering and project stages, leveraging your expertise to drive impactful change.
• Prepare meticulous documents and drawings, including Flow diagrams, GA, and technical specifications, ensuring precision and adherence to standards.
• Lead detailed engineering efforts for secured projects, crafting comprehensive plans encompassing PFD, PID, technical specifications, process descriptions, and control philosophies.
• Assess engineering requirements meticulously, from equipment sizing and material selection to piping specifications, ensuring optimal process functionality.
• Collaborate seamlessly within a team to craft compelling commercial and technical submissions for tenders and proposals, engaging with clients and suppliers to deliver outstanding results.
• Facilitate technical discussions and clarifications with stakeholders, fostering effective communication and alignment.
• Contribute to testing and commissioning activities, ensuring project success and client satisfaction.
• Support the preparation of operation and maintenance manuals, ensuring seamless project handover and continued excellence.

Requirements:

• Hold a Diploma or Degree in Engineering Discipline or Environmental Science.
• Possess a minimum of 4-6 years of experience in process design for wastewater industries; senior positions available for candidates with extensive experience.
• Demonstrate proficiency in Aerobic/Anerobic processes, membrane technology (UF, MBR), and sludge handling applications in water/wastewater treatment.
• Exhibit self-drive, results orientation, and the ability to excel both independently and collaboratively within a team.
• Fluent in Mandarin to facilitate effective communication with Chinese clients and vendors.
• Prefer immediate availability or a short notice period.
• Must hold Singaporean citizenship.

Other info:

Work hours: 9.00am to 6.00pm, Monday to Friday.

Medical and Dental Benefits

Insurance

Embark on a rewarding career journey with us and be at the forefront of shaping a cleaner, more sustainable world. Apply now to join our dynamic team!

Job Highlights

• Well versed in ISO 9001, QA metholodogies & tools
• Scope to innovate & develop continuous improvement processes

Job Description

• Develop & implement QMS system & take the lead of continuous improvement process & initiatives
• Provide root cause analysis & preventive action plans to resolve non-compliance issues
• Analyze internal & external data to identify areas for improvement & communicate with relevant parties for quality improvements
• Ensure the compliance with ISO 9001 & all relevant standards to both internal company policies & customer standards
• Maintains and implements the Quality Management System (QMS) for the organization.
• Manages Quality Assurance and Quality Control (QA&QC) by conducting audits for quality system conformance, and by liaising across departments to maintain good documentation control and management.
• Conducts investigations into inconsistent quality processes and non-conformance and recommends preventive actions to eliminate recurrences of such issues.
• Monitors product failure data and performance trends, and initiates remedial actions with relevant departments, where necessary.
• Identifies opportunities and prepares recommendations for continuous improvement in quality, productivity and cost efficiency.
• Handle Customer Complaint resolution, onsite & offsite
• Lead supervise OQA production lot acceptance and FAI submission team for achieving OTD objective.

Job Requirements

• Diploma/Bachelor Degree in Precision Engineering, Mechanical, Quality, Engineering or equivalent.
• Meticulous, thinks systematically and is able to work independently.
• Possesses good organization, problem-solving, interpersonal and communication skills.
• Good knowledge of Quality Management System and ISO 9001-2015. Certified Auditor will be a plus.
• Knowledge of LEAN Six Sigma and 8D Discipline methodology highly desirable.
• MS Excel, PowerPoint a MUST and ERP knowledge an advantage.
• Only Singaporean may apply.

• Efficient project management, including project scheduling, leading, and coordinating the project team (supervisors, foreman, workers, and subcontractors)
• Liaise with clients, architects, consultants, and main contractors to resolve site issues and ensure timely project execution
• Coordinate workers on site and make accurate, decisive, and prompt decisions related to work matters
• Prepare, check, and submit shop drawings and as-built drawings, ensuring conformance to regulations and client requirements
• Produce detailed manufacturing drawings to implement design solutions to all relevant engineering and quality standards by using SolidWorks and other AUTOCAD software

We are seeking a highly skilled and motivated Service Engineer to join our team. The ideal candidate will be responsible for providing technical expertise, performing maintenance, and delivering support services to ensure the efficient operation of equipment and systems.

• Designing and developing electrical systems for marine vessels
• ⁠Installing and commissioning electrical systems on ships
• Supervising the work of marine engine technicians
• Inspecting and testing electrical systems and equipment
• Maintaining and repairing electrical systems and equipment
• Designing tray routes and electrical panel positions
• Creating single-line diagrams of lighting and other electrical panels
• ⁠Supervising the installation, cabling, and termination of electrical equipment
• Independently testing and Commissioning electrical panels
• Presenting surveys of electrical systems to relevant authorities

Organizational Relationships: • Reports directly to Project Director.

Authorities: In charge of planning, executing, and finalizing projects according to strict deadlines and within budget. This includes acquiring resources and coordinating the efforts of team members and third-party contractors or consultants in order to deliver projects according to plan. In addition, the Project Manager will also define the project’s objectives and oversee quality control throughout its life cycle.

Responsibilities:

1. Typical duties will include but not be limited to the preparation and/or modification of the following:

• Civil/Structural engineering plans, design, and layout.
• Civil/Structural project specifications.
• Civil/Structural engineering portion of project proposals.
• Civil/Structural engineering portion of project cost estimates.

2. Provide drawing for own designs and produce sketches to incorporate in drawings by drafters.

3. Develop probable construction cost estimates for projects.

4. Use computer-assisted engineering design and software and equipment to prepare engineering design documents.

5. Perform field activities such as observe and record existing field conditions, take and verify measurements within project

area.

6. Direct and manage project development from beginning to end.

7. Define project scope, goals and deliverables that support business goals in collaboration with senior management and

stakeholders.

8. Develop full-scale project plans and associated communications documents.

9. Effectively communicate project expectations to team members and stakeholders in a timely and clear fashion.

10. Liaise with project stakeholders on an ongoing basis.

11. Estimate the resources and participants needed to achieve project goals.

12. Draft and submit budget proposals, and recommend subsequent budget changes where necessary.

13. Where required, negotiate with other department managers for the acquisition of required personnel from within the

company.

14. Determine and assess need for additional staff and/or consultants and make the appropriate recruitments if necessary

during project cycle.

15. Set and continually manage project expectations with team members and other stakeholders.

16. Delegate tasks and responsibilities to appropriate personnel.

17. Identify and resolve issues and conflicts within the project team.

18. Identify and manage project dependencies and critical path.

19. Plan and schedule project timelines and milestones using appropriate tools.

20. Track project milestones and deliverables.

21. Develop and deliver progress reports, proposals, requirements documentation, and presentations.

22. Proactively manage changes in project scope, identify potential crises, and devise contingency plans.

23. To carry out any tasks that is required by Management and as assigned for upholding the ISO 9001: 2008 and OHSAS

18001:2007 Intergrated Management System.

Qualifications:

1. Educational Qualification: Bachelor Degree in Civil Engineering or equivalent.

2. Relevant Experience: 2 years in project management, with special focus on structural engineering.

3. Computer Literacy: Advanced experience with Microsoft Office, AutoCad and StruCad and Project Management software.

Competency Requirements:

In a multicultural environment / work force, the incumbent should:

• be proficient in English
• have strong interpersonal skills, including written and oral communication skills.
• be persuasive, encouraging, and motivating.
• possess the ability to defuse tension among project team, should it arise.
• possess the ability to effectively prioritize and execute tasks in a high-pressure environment is crucial.
• possess the ability to read communication styles of team members and contractors who come from a broad spectrum of disciplines.
• possess the ability to shift priorities, demands and timelines through analytical and problem-solving capabilities.
• react to project adjustments and alterations promptly and efficiently.
• possess the ability to elicit cooperation from a wide variety of sources, including upper management, clients, and other departments.

Ensure that all works carried out are of highest quality standard to meet customer satisfaction.

§ Execute the site testing and commissioning activities of the company to the satisfaction of the owners and builders

§ Liaise with Yard’s commissioning personnel to close out issues which will affect the smooth completion of project

§ Ensure that Punch List are corrected and Test Memo and Service Acknowledgement Report are signed

§ Ensure that site issues are highlighted to the Production Manager/Assistant Production Manager in order to come up with proper and timely solution

§ Inform the project engineers in the event of changes on design, drawings and system operation which may arise during the job execution.

§ Highlight to Project Engineers any changes that may be required on supplied equipment for quality improvement

§ Ensure that the equipment used for commissioning are calibrated and maintained in good working condition to achieve quality standard.

§ Ensure non-conformity report is being raised as and when necessary.

§ Ensure that non-conformances are promptly resolved by means of investigation and corrective action.

· Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.

· Formulating project parameters and assigning responsibilities to the most capable employees and monitoring the project team.

· Interacting with clients, interpreting their needs and requirements, and representing them in the field.

· Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project's status.

· Cooperating and communicating with the project manager and other project participants and collaborating with senior engineers to create more efficient project methods and to maintain the project's profitability.

· Reviewing the engineering tasks and initiating the necessary corrective actions.

· Developing specifications for the project's needed equipment.

· Creating frameworks to measure the project's metrics and data collection.

· Establishing field test methods and methods for monitoring the quality of those tests.

· Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications.

Project Engineer Requirements:

· A Bachelor's degree in engineering or a related field.

· 3 or more years' field and project planning experience.

· Excellent computer literacy and knowledge of design and visualization software.

· The ability to work with multiple discipline projects.

· Excellent project management and supervision skills.

· Excellent organizational, time management, leadership, and decision-making skills.

· Strong written and verbal communication skills.

· Knowledge of applicable codes, policies, standards, and best practices.

JOB DESCRIPTION

1. Responsible for overall project progress and ensure project is complete within the specific time, within budget and meet client’s requirement;
2. Liaise with design team on engineering and design issues;
3. Responsible for planning and deployment of resources such as manpower, machinery, equipment and material;
4. Resolve any disputes/clarifications during the execution of project;
5. Ensures settlement of project final accounts at the end of the contract;
6. Prepares and attends project budget presentation and review;
7. Prepares audit reports;
8. Chairs Safety and Health coordination meetings.

REQUIREMENT

1. Diploma in Mechanical Engineering or Equivalent Certificate;

2. At least 3 years of relevant experience in the Marine Industry;

3. Good office coordination skill and interpersonal skill;

4. Independent and resourceful;

5. Good communication skill;

6. Able to handle pressure;

7. Preferably able to understand and read Mandarin.

Job Description

• Develop battery data analytics processes and visualizations for vehicle programs.
• Data management and retrieval using Spark, Hive, Hue, and Jupiter Notebooks.
• Data analysis using Python, MATLAB, and R.
• Data visualization with Power BI, Tableau, Matplotlib, and ggplot2.
• Collaborate with battery data analytics and engineering groups on algorithm design, results, modifications, production issues, data consumption methods, and lessons learned.
• Apply analytical methods to assemble insight from electric vehicle usage data. Use the appropriate statistical methods to make actionable inferences.
• Fit comp.
• lex models to multi-factor datasets using Python, MATLAB, R.
• Model and project the long-term trends of key electric vehicle metrics. Validate results.
• Apply statistical and machine learning models to understand battery production quality metrics.
• Contribute to analytics forums and cross-functional groups by sharing learning within and beyond Global Battery Engineering and Automotive Engineering for PSV operation.

Job Requirement

• Any qualification in Automotive/Electrical/Mechanical Engineering, Computer Science, Applied Mathematics, Statistics, or Data Analytics.
• Minimum technical knowledge of data analysis methods and success in solving complex problems.
• Proficiency using relevant tools. (Python, Spark, Hive, MATLAB, Power BI, R).
• Real-world experience using Hive to query Hadoop data file structures.
• Practical knowledge of machine learning and predictive methods.
• Ability to lead multiple projects and assignments with high level of autonomy and accountability for results.
• Knowledge of high voltage batteries and electrification subsystems.
• Electrochemistry background.
• Willingness to learn and quickly adjust to new tools and systems.
• Capable of converting ambiguous problem statements into concrete project requirements.
• Proven proficiency in statistical analysis techniques.
• Practical knowledge of machine learning and predictive methods.

Job Description

• Develop battery data analytics processes and visualizations for vehicle programs.
• Data management and retrieval using Spark, Hive, Hue, and Jupiter Notebooks.
• Data analysis using Python, MATLAB, and R.
• Data visualization with Power BI, Tableau, Matplotlib, and ggplot2.
• Collaborate with battery data analytics and engineering groups on algorithm design, results, modifications, production issues, data consumption methods, and lessons learned.
• Apply analytical methods to assemble insight from electric vehicle usage data. Use the appropriate statistical methods to make actionable inferences.
• Fit complex models to multi-factor datasets using Python, MATLAB, R.
• Model and project the long-term trends of key electric vehicle metrics. Validate results.
• Apply statistical and machine learning models to understand battery production quality metrics.
• Contribute to analytics forums and cross-functional groups by sharing learning within and beyond Global Battery Engineering and Automotive Engineering for PSV operation.

Job Requirement

• Any qualification in Automotive/Electrical/Mechanical Engineering, Computer Science, Applied Mathematics, Statistics, or Data Analytics.
• Minimum technical knowledge of data analysis methods and success in solving complex problems.
• Proficiency using relevant tools. (Python, Spark, Hive, MATLAB, Power BI, R).
• Real-world experience using Hive to query Hadoop data file structures.
• Practical knowledge of machine learning and predictive methods.
• Ability to lead multiple projects and assignments with high level of autonomy and accountability for results.
• Knowledge of high voltage batteries and electrification subsystems.
• Electrochemistry background.
• Willingness to learn and quickly adjust to new tools and systems.
• Capable of converting ambiguous problem statements into concrete project requirements.
• Proven proficiency in statistical analysis techniques.
• Practical knowledge of machine learning and predictive methods.

Job Description

• Develop battery data analytics processes and visualizations for vehicle programs.
• Data management and retrieval using Spark, Hive, Hue, and Jupiter Notebooks.
• Data analysis using Python, MATLAB, and R.
• Data visualization with Power BI, Tableau, Matplotlib, and ggplot2.
• Collaborate with battery data analytics and engineering groups on algorithm design, results, modifications, production issues, data consumption methods, and lessons learned.
• Apply analytical methods to assemble insight from electric vehicle usage data. Use the appropriate statistical methods to make actionable inferences.
• Fit complex models to multi-factor datasets using Python, MATLAB, R.
• Model and project the long-term trends of key electric vehicle metrics. Validate results.
• Apply statistical and machine learning models to understand battery production quality metrics.
• Contribute to analytics forums and cross-functional groups by sharing learning within and beyond Global Battery Engineering and Automotive Engineering for PSV operation.

Job Requirement

• Any qualification in Automotive/Electrical/Mechanical Engineering, Computer Science, Applied Mathematics, Statistics, or Data Analytics.
• Minimum technical knowledge of data analysis methods and success in solving complex problems.
• Proficiency using relevant tools. (Python, Spark, Hive, MATLAB, Power BI, R)
• Real-world experience using Hive to query Hadoop data file structures.
• Practical knowledge of machine learning and predictive methods.
• Ability to lead multiple projects and assignments with high level of autonomy and accountability for results.
• Knowledge of high voltage batteries and electrification subsystems.
• Electrochemistry background.
• Willingness to learn and quickly adjust to new tools and systems.
• Capable of converting ambiguous problem statements into concrete project requirements.
• Proven proficiency in statistical analysis techniques.
• Practical knowledge of machine learning and predictive methods.

Job Description:

· Industry/ Organization Type: Manufacturing/ Chemical

· Working Location: Jurong

· Working Hours: Monday – Friday, 8:30am – 6:20pm

· Duration: Permanent

Job Responsibilities:

· Manage quality assurance program to monitor incoming wastewater profile and implement control measures to ensure compliance.

· Analyse wastewater analytic results and work with Plant Manager on daily wastewater treatment plan.

· Work with Plant Manager to conduct testing and acceptance of new wastewater streams.

· Work with Plant Manager to conduct trials and tests to optimize treatment efficiency.

· Ensure proper upkeep of laboratory records and maintain the integrity of database.

· Oversee the smooth and safe operations of lab function to support the plant operations.

· Ensure lab procedures are updated and operators are trained properly to conduct the lab analysis.

· Procure and manage laboratory supplies such as chemicals, reagents and consumables, etc

· Manage the maintenance plan for laboratory Instruments and conduct scheduled calibration

Requirements:

· Diploma or Degree in chemical engineering field.

· Proficiency in Microsoft words and excel.

· Min 3 years relavant working experiences.

· Result-oriented, self-disciplined and responsible.

Summary:

• Basic up to $3500 + AWS + VB
• Full time position
• 5 working days
• Tuas

Responsibilities:

• Act as the technical point of contact for new product development and implement improved processes.
• Perform hands-on testing, process development, and troubleshoot issues using scientific moulding principles to enhance efficiency and quality.
• Develop and document moulding processes, including technical documentation like FMEA, validation protocols, and engineering reports.
• Trial, evaluate, and modify new tooling and equipment to meet quality and production standards.
• Collaborate with customer engineering teams, internal teams, and vendors to align designs with manufacturing processes and business objectives.
• Participate in improvement activities, provide cost inputs for quotations, and support development efforts, including travel for onsite testing and knowledge transfer.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at www.rkgroup.sg

RK Recruitment Pte Ltd | EA License No.: 20C0280

Raymond Ng Jun Han | EA Personnel No.: R1657009

Job summary:
Experience in marine and oll & gas sector.
Responsible for the assigned customer account, to ensure all product quality, process quality andsystem quality to conform with customers' specifications and internal quality system reauirements

Roles & Responsibilities:
1.To liaise with Customer Quality representatives on all Quality matters.
2.Lead the investigation on all Customer Quality Feedback, Complaints and CAR with internal cross.functional team for comprehensive root cause failure analysis and ensure closure with effectiveimplementation of corrective actions and preventive actions.
3. Monitor product quality performance and generate quality reports; chair monthly product qualityimprovement meetings to reduce the customer reject and field return rate for continual improvement!Identify Quality lmprovement projects and initiatives to drive Customer Satisfaction with Quality.
4.Establish with customer representative and internal team on New Product Quality plans, procedureswork instruction for overall auality control and coordinate implementatilon and maintenance of suchplans, procedures or instructions; conduct quality training/ cross training for QA inspectors.
5.Audit customer fabrication line for compliance to applicable standards and procedures in QMs andEMS

58 RECRUITMENT PTE. LTD

19C9772

67026282

Job Description

• Supporting the Power Plant to meet the contractual, technical and commercial set-up and operation.
• Prepare the scope of works for electrical services, specifications of spare parts for the maintenance work.
• Maintain and updated all the drawings, data and maintenance record for all electrical equipment and plant utilities in Power Plant.
• Ensure the proper preventive, corrective and condition-based maintenance (including emergency situation) carried out for all electrical equipment and plant utilities in the Power Plant.
• Perform technical evaluation on external service engagement and material purchase.
• Assist in preparation of the annually maintenance budgetary cost on electrical equipment and plant utilities.
• Provide necessary guidance and advice to maintenance staff to ensure the quality maintenance is carried out as per good engineering practice.
• Ensures that subordinates are adequately trained and recommends necessary training.
• Ensure PPE are provided, and subordinates are utilizing it by executing works with all safety precautions.
• Ensure all Power Plant jobs executed are in line with statutory requirements of concerned authorities and power plant policies and procedures.

Job Requirements

• Possess a Bachelor Degree in Electrical Engineering
• At least 3 years of relevant working experience in Power Plant Maintenance ideally on a CCPP
• Involvement in technical aspects of Power Plant maintenance
• Experience in the erection, testing and commissioning, and initial start-up phases of a modern Power Plant
• Knowledge on electrical system including installation, troubleshooting, routine inspection and maintenance
• Knowledge on electromagnetic rotating equipment
• Knowledge on protection relays
• Knowledge on electrical equipment, i.e. GIS, MV/LV switchgear, transformer, generator, Automatic Voltage Regulator, Uninterruptable Power Supply, VFD, DC System-Battery and charger, HVAC, Communication System, etc
• Knowledge on control circuitry of power plant electrical system
• Knowledge in maintaining maintenance record in CMMS