Responsibilities:

• Evaluate and prepare Technical Bid Evaluation (TBE) for vendor’s proposals
• Liaise with other disciplines and departments to optimize areas of interface, during design development, review and checking processes
• Selection of piping materials, manual valves and special piping items
• Establishing methodologies, schedules and piping material take-off items
• Perform piping planning studies and assist in plot plan and line list developments
• Preparing technical queries and liaise with site personnel
• Review all piping design deliverables and documentation done by designers & drafters

Requirements:

• Degree in Chemical or Mechanical engineering
• Minimum 5 years of piping design experience in Oil & Gas industry.
• Familiar with piping routing practices on pipe racks, sleepers, pumps, tanks, heat exchangers, pressure vessels, flares and etc.
• Hands of experience of CAESAR II is an advantage
• 3D model design
• Able to perform piping tie-in surveys and piping tie-in design
• Able to perform piping material take-off
• Familiar with respective code of practices for piping design such as ANSI, ASME, API, DEP/PTS

Responsibilities:-

1. Prepare material requisition lists for job requirements.

2. Plan and design electrical switchboards, consoles and control panels according to customer's requirements and Terasaki standards.

3. Prepare approval drawings, shop drawings, final drawings / documents, short circuit calculations, instruction manuals as required for submission to clients and shop floor production.

4. Co-ordinate with clients and consultants on the technical requirements. Attend technical discussions with clients and consultants when required.

5. Feed back to Sales & Marketing Department on the changes of technical requirements by clients for claims of additional costs and time.

6. Check and follow-up on design and shop drawings with production departments.

7. Develop and improve on design of electrical switchboards, consoles and control panels. While taking note of quality, standard, cost effective designs are to be considered.

8. Assist and advise Sales & Marketing Department on technical matters, provide technical backup for securing of contracts.

9. Carry out other responsibilities as and when assigned by the superiors.

10. Follow the procedures of design control, documentation and data control, and quality system of the total Quality Management System.

Criteria:-

Applicant must possess experiences in marine/industrial switchboard design.

Job Description

· Assist Engineering Manager for mechanical drawing and engineering document.

· Prepare Material Take Off list of ducting system.

· Make duct Spool drawings and shop drawings.

· Closely work and liaise with the Commercial Department and the Operation Department on projects.

· Provide technical support to the field works related to HVAC system and equipment.

· Technical survey and inspection at site if necessary.

· Project coordination between worksite, office, clients and suppliers.

· Any other duties assigned by the Management as and when necessary.

Requirements

· Tertiary education in engineering discipline

· At least 2 years’ working experience in HVAC systems, preferably in marine industry

· Has in-depth knowledge of HVAC Ducting System.

· Good written and verbal communication and coaching skills

The Singapore Centre for 3D Printing (SC3DP) offers a full range of additive manufacturing services, from design and infrastructure to production and validation. With advanced technologies such as topology optimization, generative design, and bioinspired design, SC3DP creates optimized products using a variety of novel materials and printing processes, including hybrid printing, post-processing, and emerging technologies. Sustainability is a top priority for SC3DP, which offers material development and control services that combine artificial intelligence, big data, and other digital tools for process optimization, as well as non-destructive testing for AM parts. Backed by a team of experts and a state-of-the-art facility equipped with the latest equipment and technologies, SC3DP is committed to leading the way in sustainable additive manufacturing research and development.

The centre is seeking to hire a staff to manage the laboratory operations and activities. The candidate would be responsible for providing efficient technical and administrative support for the labs. He/she will also need to oversee the safety standards in the lab in compliance to ISO 45001 standard. The candidate will provide essential technical, administrative support and engineering expertise to faculty, research staff, and students to ensure the smooth operation and safety of the laboratories in enabling the faculty, research staff and students to accomplish their academic and research activities effectively and efficiently.

Responsibilities:

Provide training, expertise, maintenance and support in equipment operations on additive manufacturing and related processes:

• Operate all relevant equipment and accessories (within a team or individually depending on activity)
• Understand and implement existing and emerging technologies in additive manufacturing
• Perform regular maintenance, troubleshooting and calibration of equipment, and ensure equipment is in working condition at all times
• Oversee lab activities to enforce proper and safe utilization
• Provide technical advice and support on equipment including responding to technical questions, troubleshooting and correcting experimental errors
• Coach researchers on the operation of equipment and in carrying out experiments in a safe and effective way
• Liaise with all relevant internal and external stakeholders and manage vendors and contractors for the technical needs of the laboratory
• Support all stakeholders in administrative procedures and logistics

Perform routine checks and inspection of assigned laboratories and researcher office to maintain good housekeeping, enforce safety regulations and create safety awareness among all stakeholders:

• Conduct daily housekeeping and regular checking of all contents of the assigned laboratories and researcher office to ensure compliance to safety regulations
• Follow up on all safety inspection findings and ensure the corrective actions are implemented on schedule
• Perform in assigned safety role(s)
• Regular updates of lab records and documentation

Support the daily operations of all safety, administrative, procurement and security matters in SC3DP:

• Ensure that duties are carried out in compliance to safety, OHSAS 18001/SS 506/ISO 45001:2018 and relevant national regulations
• Maintain security of laboratory’s access and compliance of house rules by users of the laboratory
• Enforce safety, security rules and regulation in the laboratory
• Ensure all Risk Assessment and safety documents are up to date
• Procures and manages the budget of equipment consumables to ensure that consumables are tracked and purchased in time to ensure that the laboratory is well-stocked.

Requirements:

• Diploma or Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, Aerospace Engineering or equivalent
• Experience in handling various industrial / workshop machines and peripherals.
• Prior experience in additive manufacturing and working in a laboratory environment will be an advantage.
• Good social and communication skills
• Proficient in MS Office (Word, Excel, PowerPoint
• Meticulous, organized and diligent
• Highly adaptable, resourceful and self-motivated
• Able to work independently as well as in teams
• Able to multi-task and work in a dynamic environment
• Hands-on and enjoys creating and building things
• Sharp, innovative doer
• Create solutions to problems that have yet to be solved

Job Duties & Responsibilities:

• Liaise with internal departments personnel on project related activities.
• Coordinating with Site Personnel for updates regarding the work in progess and updating the Client.
• Assist to liaise with customers on job matters.
• Assist to monitor manpower planned for the job tasks and the actual do not deviate to compile timely report of deviations for discussion at the Managenent level.
• Assist to monitor the tools, equipment and materials planned for the various projects for their availability and timely delivery.
• Monitor departments productivity indicators and to compile report for HODs and Management perusal and follow-up actions.
• Monitor progress of the project according to plan schedule to meet deadlines.
• Compile Work Instructions for all the jobs.
• Ad-hoc assignments assigned by the managements.

Job Requirements:

• Degree/diploma holder in Engineering or its equivalent.
• At least 1-year experience as Planner in Manufacturing, Petrochemical, Pharmaceutical and Oil & Gas Sector.
• Knowledgeable in MS Access, MS Office
• With interpersonal skills.
• Can work with minimum supervision.

Purpose

Roche is a global pioneer & leader in Personalized Healthcare. We provide breakthrough differentiated medicines and diagnostic tests using expertise in Science, Technology and Data so that people can live better lives. We believe it’s urgent to deliver medical solutions right now – even as we develop innovations for the future. We commit ourselves to scientific rigor, unassailable ethics, and access to medical innovations for all. The rapid digitalization of healthcare fuels an accelerated transformation in our industry. This change requires leaders who are entrepreneurial, who foster innovation & inspire teams to take risks, learn and progress quickly.

Your Opportunity

Regional Finance Development Program identifies top early-in-career talent and accelerates their development across APAC countries and across different parts of the business, enabling them to be key contributors to our company’s ambition and purpose, “Doing now what patients need next”.

Recognizing the central importance of experiential learning and development, Regional Finance Development Program provides a platform to strengthen a broad regional network and to gain experience and skills in different areas that will be vital for a career in Finance. We want you to reach your full potential by stretch assignments, doing rotations in different exciting roles. You will be part of transforming Finance and making it ready for the future.

What we offer you
The opportunity to build skills and capabilities across Finance in a variety of functions in APAC, roles, projects and locations during a 2 years time period. From Affiliate to Roche Services & Solutions (RSS), from Pharmaceuticals to Diagnostics. Post program, you are fully empowered to assess opportunities and decide on your further career with Roche. Mobility support is provided wherever that’s needed. Inspiring peers and thought leaders, and broad personal support by your Program Manager, a Rotation Manager, and a Senior Leader Mentor. Lifelong learning is part of our strategy; you will receive on-the-job training, formal leadership & self-directed learning, and will learn through targeted mentoring & coaching, and other networking resources.

Your Profile
● You bring a diverse perspective and you are ready to collaborate for impact. You are intrigued to work at the confluence of Finance, Science and Technology. You thrive in a collaborative work environment which enables teams to achieve beyond the sum of their parts. You understand that everyone leads, irrespective of hierarchy. As a fast learner, you proactively drive outcomes, integrate well into different cultures, teams and business settings. As a member of the Roche Finance community, you will embrace entrepreneurial spirit, enterprise thinking, inclusive collaboration and continuous learning. You are keen to build capabilities as a Finance professional to generate business outcomes. To be a successful candidate, you fulfill all of the following requirements:
● Excellent academic profile: Bachelors in Business Administration, Finance, accounting or any other related degree which has a Finance major or speciality, CFA/MBA/CIMA preferred
● Between 1-3 years of working experience with a focus in Finance, Healthcare Industry, consumer goods, Tech or Consulting with an exposure to projects related to innovation in digital or advanced analytics technologies
● Have a structured problem-solving and strategic analytical and agility skills

● Simplifying complex information into clear, synthesized insights as basis for decision making at all levels of the organization
● Excellent communication and influencing skills which enable collaboration in local and global networks
● Be passionate about driving adoption of new technologies, including AI, machine learning and RPA to provide financial transparency, drive productivity and derive insights
● Be comfortable collaborating in self-managed, cross-functional teams
● Be a team player and your personal qualities match our values of integrity, passion and courage
● Have a global mindset and think beyond boundaries with a high degree of regional/global mobility during and after the program
● Show strong leadership potential and have the ambition to take on a leadership position in finance in the near future
● Have an entrepreneurial spirit and foster a culture of business innovation

Roles & Responsibilities:

• Daily Update of Project/Operation Progress to immediate superior.
• To have and maintain good daily attendance and punctuality.
• Oversee the work of Electricians and Instrument Techs, responsible for training and testing, responsible for maintenance of and compliance with electrical safety program, including LOTO System.
• Must have hands on knowledge and experience with various types of instrument and electrical systems, equipment and software. Looking for construction sector experienced candidate.
• Comply with company procedures and legal obligations.
• Promote and comply with environmental compliance.
• Deliver the works safely and to deadline.
• Promote best practice for Safety , Quality and Productivity.
• Ensure work is delivered defect/snag free.
• Coordinate with client and other Contractors for the project interface activities.
• Production of accurate records, drawing registers and weekly Reports.
• Must have good relationship with Site team & client technical representative.

Requirements:

• Diploma in Electrical / Electronics Engineering and minimum 3 years of relevant experience
• Familiar with automatic control engineering
• Knowledge in frequency converters, Siemens Masterdrives and Micromaster
• Knowledge of MS Office is a must, Driving license is additional advantange.
• Ability to read complex circuit diagrams
• Basic knowledge in mechanics, pneumatics and hydraulics
• Strong personality with a hands-on attiude
• Ability to work rotating shift and perform overtime on weekdays & weekends
• Self- motivated, flexible and capable of working in a fast-paced environment.
• Good verbal and written communication skills

• Develop new customers while managing our existing customer base
• Pre-sales preparation (preparing project budgetary prices, quotations, costings, completion of technical specifications, delivering catalogues and engineering data to customers)
• Provide technical and engineering support to customers, whenever necessary.
• Electrical & mechanical products knowledge

Responsiblities :

1) To prepare design, calculations and review of structural design

drawings according to clients specification and requirement;

2) Plans and supervise archtectural work progress at site;

3) Liaise closing with the subcontractors on the progress of work.

4) Coordinate with client’s representatives, consultants and sub-

contractors on technical matters.

5) Ensure quality of works is achieved and safety regulations are

complied with

Requirement :

1) Diploma or Degree in Architecture;

2) Competent in Autocad/BIM/Tekla Software ;

3) Proficient in Microsoft Office (Excel / Word / PowerPoint / Outlook);

4) At least 3 years of relevant experience;

5) Good Communication and interpersonal Skills.

To handle and support on business development activities in expanding data center business in regional market.

Planning and Specification

• To identify Data Center customer’s needs and enhance the company’s chances of securing orders.
• Conduct company and product presentation for owners, consultants, and any other new external stakeholders.
• To spec in our brand and product into consultant and owner’s vendor list, influence them to apply our brand.
• To work closely with cross functional team, like Engineering, QA, GSC and any other on handling inquiries.

Business Development

• To identify and engage new Data Center customers and consultant, obtain new contacts for key account and regional managers.
• Develop and maintain knowledge of consumers, competitors, and market trends through engagement, to support on market analysis.
• To lead on global purchase / LOA agreement inquiries from customers.
• Stay up to date with industry best practices and standards through attending events and seminars, attending individual and group training programs, and reading industry publications and newsletters.
• Communicates the information acquires to superior for the purpose of maximizing on sales opportunities, keeping the department and the business at par with the latest trends and best practices, giving the business a competitive edge and solidifying its position as a market leader.
• To identify and expand business into potential industry segments, develop market entry strategies, engage potential business partners to spec in and obtain enquiries leading to order.

Sales Activities

• Meet with Data Center customers/dealers to discuss their evolving needs and to assess the quality of our company’s relationship with them.
• Networking through attend exhibitions, seminar and any other activities that can enhance our brand awareness as well as building connections.
• To handle Data Center inquiries and project tenders on assigned region by superior.

Product Development

• Collaborate with engineering and marketing team to identify opportunities for improving existing products and marketing materials, based on market demand and latest advancements.
• Gather feedbacks from clients and dealers, and channel it to engineering, QA & GSC for product and services quality improvement.
• And any other ad hoc task request from superior.

Requirements:

• Diploma or Degree in Mechanical or Electrical or any equivalent Engineering
• 3 years of related genset and data center sales experience preferred
• Proven regional Sales Engineer experience in a relevant industry
• Experience on handing distributor, key accounts & customers
• Possess technical presentation skills
• Proficiency in Microsoft Excel - Pivot Table and Advanced Formulas & Analytics
• Effective negotiation and influencing skills
• Having strong ice-breaking and engagement abilities.
• Able to work on any ad-hoc task
• Willing to travel and within short notice

The Engineer, Supply Engineering shall be responsible for the consistent supporting and monitoring of proposal development, tracking of projects progress, and driving development of engineering advancements across group companies in A&O (Asia & Oceania).

Key Responsibilities

• Collaborate with cross functional team to support developments of proposal for various engineering projects within group companies.
• Review and provide inputs on technical aspects, feasibility and alignment with company objectives, best practices, and standards.
• Regularly liaise with assigned project leaders in group companies to gather updates, identify challenges and ensure adherence to project timelines.
• Explore new collaborations with well-established vendors globally while concurrently assessing existing equipment manufacturers to ensure the necessary support for projects and proposals.
• Organize and facilitate engineering programs for the group companies, fostering continuous learning and professional development.
• Collaborate with safety and productivity teams to identify areas for continuous improvement in safety measures and operational efficiency.
• Regularly communicate and present to key stakeholders and Group Engineering in NSHD on proposal development, project progress, engineering programs, safety measures and other collaborative improvement initiatives

General Requirements

• Bachelor’s degree in engineering or a related field.
• Diploma in Engineering with more than 5 years’ relevant experience can be considered
• Proven experience of at least 3 years in project management and/or proposal development on Plant Process in Gas and Chemical Industry.
• Strategic thinking and problem-solving capabilities
• Possess good communication and interpersonal abilities.
• Initiative, drive, and the ability to work independently.
• English speaking & writing skill
• Result-oriented and energetic with positive attitude.
• Willing and able to travel.
• Proficiency in AutoCAD software

We help people stay employable

About JobTech

JobTech is the world's leading artificial intelligence and big labour data analytics product company that empowers leaders to develop people for new work realities, driven by real labour market needs and individuals' personal aspiration. JobTech is growing rapidly with global big names customers from both private and public sectors.

About the Team
The JobTech team is an enthusiastic bunch, obsessed with solving human capital business problems in talent development, using deep technology and labour market data. We embrace empowerment and appreciate the depth of every member’s area of expertise. We are hands-on dreamers who are willing to invest in projects and people. If you think you should be part of this awesome team looking to scale faster and better, don’t be shy and let us know!

Job Description

JobTech is a product start-up looking to solve real world labour problems and deliver the best possible experience to our end users. We are looking for passionate and self-driven hands-on developers who can lead by example.

· Design, build and maintain webservices to deliver high availability and performance

· Design, build and maintain complex business rules engine in a production environment

· Implement and oversee DevOps framework and practices

· Own and take responsibility of end-to-end delivery of modules and deployments

· Work closely with our technical leaders to enhance software architecture and infrastructure.

· Collaborate with data scientists to seamlessly integrate the different analytics components

· Engage with both technical and business stakeholders to ensure customer success

· Maintain code quality, organization and automation. Set out design principles for the rest of the technical team

· Strategically plan ahead according to JobTech’s technology roadmap.

Requirements

· A self-starter that can thrive in a fast-paced environment

· At least 8 years of experience in the software development industry

· Advance proficiency in Java/J2EE and Python as well as Java libraries and frameworks such as Spring Boot

· Advance knowledge of database management and scaling: MariaDB, MongoDB. Experience working with cloud databases (e.g. RDS, BigTable) and GraphDB is an added advantage.

· Experience in building and optimising large scale systems including search and recommendation engines (ElasticSearch, Solr, Redis etc)

· Prior experience leading a software team (including experience with managing remote developers)

· Hands-on experience with Kubernetes and Docker is a plus

Email: [email protected]

We are looking for a Solar Project Engineer who is passionate about deploying solar energy in Singapore. The successful candidate will be in charge of executing solar projects on roof tops all across Singapore and the region.

Job Requirement

• Design, build and install solar energy systems
• Onsite planning and managing of installation teams
• Contact point between the company and client during construction stage
• Create and execute project work plans and revise as appropriate to meet changing needs and requirements.
• Hands on implementation on site
• Design the full construction from pre to post-construction and handover of the system to the client
• Complete assigned projects on schedule and within budget
• Identify any potential safety risks within projects and putting in place strategies to mitigate any risks
• Ensure all required Environmental, Health and Safety requirements are met.
• Prepares for engagement reviews and quality assurance procedures.
• Ensure smooth delivery of the project completion/SystemTurn On

Skills and Competencies

• Excellent communicator who is able to work independently
• Diploma/Degree in Electrical Engineering or related fields
• 3-5 Years of experience in project management
• Candidate with experience in solar project execution will be in advantage
• Knowledge in energy modelling software (PVsyst), Autocad and construction modelling software
• A team player who is results and customer oriented, independent, creative and passionate about renewables
• Singaporeans/PRs only

** ONLY Singaporeans/ PRs may apply ** No Agents Please**

About us

We are a global technology company, driving energy innovation for a balanced planet.​

Together, we create amazing technology that unlocks access to energy for the benefit of all.​

Our inclusive culture is the key to our success. We collaborate with our internal community of colleagues, alumni, and our valued external partners to support each other and achieve our goals. We aim to raise the bar high. We look for people who are committed to innovation and success and act with integrity to become and be a part of one of the most diverse group of experts in our industry, anywhere around the globe.

Global in outlook, local in practice – and with a united, shared passion for discovering solutions, we hire talented, driven people and support them to succeed, personally and professionally.

Mechanical Engineer

Roles and Responsibilities:

You as a Mechanical Engineer must be able to apply your skills and expertise to generate solutions that

require development or sustainment of new or improved techniques, procedures, or products. Your success

includes assisting with planning, conducting, and evaluating approaches to meet project objectives in a timely,

cost-effective fashion.

Successful Mechanical Engineers are self-motivated and work effectively in team or individual situations. They

have excellent communication skills and can handle multiple projects and activities simultaneously.

HOW YOU’LL SUCCEED

• Be able to analyze, design, develop and maintain products and assist in commercialization to gain
• industrial insights and knowledge as an engineer such as design expertise.
• Assisting in identifying and organizing requirements and applying usability procedures and principles
• at project or product-line level or through customer input can help to gain insights if customer
• expectations and product knowledge.
• Being able to build prototypes, products and systems for testing and setting up and running laboratory
• simulations can aid and provide valuable insights of product design and materials
• Design testing procedures, coordinating testing and documenting results helps with both developing
• client presentation and gaining insights to further develop or improve product quality and understand
• customer needs.
• Conduct or participate in technical review such as requirements, specifications, design, codes and
• other artifacts to help with documenting and tracking which gains industry compliance and standards
• as an engineer
• Evaluate engineering approaches and risks to produce and iterate development which could enable
• you to feel empowered and gain responsibility in a long run.
• Mentor clients and field representatives this way you will understand clients needs and building
• meaningful relationships
• By contributing and identifying a lot of novel technical concepts to the market you would able to gain problem
• solving skills and hep in market expansion which could positively help your portfolio
• Aid design reuse and input design standards which can help in product development and improve
• product quality
• Acquire the skills to produce technical reports, papers, articles, presentations and patents this could
• help you in the work to be more efficient and less time consuming

Qualifications and Experience:

• Master’s, or bachelor’s degree in mechanical or aerospace engineering
• Excellent verbal and written communication skills in English
• Eagerness to take on challenges and to learn new skills

Responsibilities:

• Manage, maintain, and support network, desktop & server infrastructure which includes setting up and maintenance of servers, storage equipment and conducting backup and data recovery activities
• Provide Server administration (Linux RedHat and Windows server) support troubleshooting in cloud environment and on premise.
• Experience with Fibre Channel attached SAN storage, ISCSI, and Network Attached Storage solutions
• Troubleshoot and fix storage issues like LUN visibility, access issues, performance issues etc.
• Hands-on on storage appliances including SAN & NAS protocols
• Handle onsite/remote hardware & software issues including drive, part failure of storage system and liaising with OEM vendor for support and resolution and performing remediation activities wherever required
• Standby for after office hours and weekend support
• Preferable technologies
• Experience on SAN Brocade SAN switches including Zoning, Masking, Mapping devices to servers,
• Experience with cabling FC cables for Switches Experience on Dell switches
• Experience of working in multi switch environment, configuration of ISL, trunking Netbackup Strong background with backup systems & experience in Veritas Net Backup 8.x, 9.X. Familiarity with SAN-based and IP-based backup solutions. Knowledge in operating systems
• Experience on Net Backup in a large multi-platform environment including SSO, Master/media server and client configurations, MSDP, storage lifecycle Policy (SLP)
• Experience installing, configuring, supporting, and maintaining enterprise backups in a large heterogeneous data centre environment.
• Experience configuring fibre-based tape and disk environments consisting of tape libraries and tape devices, EMC Data Domains, Veritas Net Backup Appliances Good understanding of networking protocols
• Experience with support, troubleshooting and problem resolution for tape backup and SAN environments.
• Experience with Tape Storage Capacity Planning.
• Experience with backup and DR recovery technologies and techniques encompassing architecture, design implementation and support functions.
• Demonstrated ability to provide technical recommendations on backup architecture.
• Strong knowledge in backup/recovery administration/design responsibilities in an enterprise environment Windows experience is a plus
• Document the policies and procedures to support the operational storage environment and participate in the design and ongoing refinement of procedures and policies.
• Prepare reports on storage administration best practices, new technologies, etc. and recommend enhancements and configuration changes to improve and optimize storage.
• Ensuring the data is accessible and recoverable.
• Involve in incident management, change request, service request and change request
• Good knowledge of Vmware and Nutanix

· To identify project : Active participation and identification of prospective project through regular contacts with customer (face to customer)

· To liaise with allocated customer for sales acquisition

· To review customer requirements and prepare offers to allocated customer and follow-up offers with customer and keep updated project information

· To finalise and negotiate on contract with customers

· To commit and achieve the order intake budget

· To prepare project schedules

· To maintain existing account and help expand sales network

· M&E Products knowledge

Today, Lonza is a global leader in life sciences operating across three continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

Lonza is currently looking to hire a Associate Engineer, Maintenance. Role is responsible to execute daily routine and repair work orders as assigned. The role will perform basic troubleshooting equipment breakdowns and carry out basic repairs on production equipment/ systems or report back to Engineer/Manager. Position will escort vendors/service providers for routine maintenance work to ensure equipment is maintained in full operational status. And promptly inform the Engineer/Manager of any incidents or events, irrespective of the nature and severity.

Key responsibilities:

• Execute daily routine and repair work orders as assigned.
• Be vigilant on safety to ensure jobs are done in a safe way and maintaining a high level of GMP compliance.
• Ensure all maintenance works are duly carried out as scheduled and in compliance with Engineering standards and procedures.
• Perform shift if required and respond on-call for maintenance/service breakdown and support ongoing operations.
• Basic troubleshoot equipment breakdowns and carry out basic repairs of production equipment/ systems or report back to Engineer/Manager.
• Escort contractors, vendors/service providers for maintenance work to ensure equipment is maintained in full operational status.
• Promptly inform engineers of any incidents or events, irrespective of the nature and severity.
• Keeps all areas clean and well organized
• Communicate to Engineer/Manager when encounter non-compliance issues including work delay, breakdown, missing parts etc.
• Carry out any other duties as assigned by Engineer/Manager, inclusive but not limited to the above.

Key requirements:

• A Diploma or a relevant Trade certificate with relevant work experience in process equipment & maintenance in Pharmaceutical/Biotechnology, Medical, Semiconductor, O&G industry.
• Hands-on production equipment’s/systems operations, repair and maintenance experience in Biopharma, Pharmaceutical or a relevant environment.
• Strong problem solving and troubleshooting skills.
• With strong hands-on technical skills or willing to be hands-on on Utilities system/ process equipment.
• Detailed and Quality conscious.
• Ability to follow SOPs and instructions.
• Diligent in performing operational checks.
• Able to work independently.
• Ability to lead a small group of contractors for PM.
• Willing to lead and support on maintenance continuous improvement projects.
• Good Communication skills.
• Excellent Team player.
• Able to work on rotating Shift.

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

Job Responsibility：

• Plan, organize, supervise and liaise closely with operation team and sub-contractors on all lifting activities.
• Overall in-charge for preparing lifting and erection plan for all the Gantry Cranes.
• Prepare, develop and review Lifting plans, Method Statement, Risk Assessment and Safe Work Procedure of all subcontractor for any lifting activities.
• Conduct routine checks and inspections on work site to ensure compliance with authorities and client’s requirements.
• Daily walk about around assign areas of site and make a note of compliance and non-compliance to HSE operating procedure.
• Able to prepare and review lifting plan and coordinate site lifting supervisors, riggers and signalman, and being the focal point for all site lifting operations Perform discipline checks of the procedures and analysis.
• Read project specifications and provide feedback from an engineering perspective. Liaise with clients, and subcontractors.
• To coordinate and interface with Client/ other contractors to harmonize the onsite lifting arrangement.
• To conduct safety assessment & discussion with EHS team (safety) for any latest safety policy and implement the safety requirement when needed.
• To periodically monitor and implement any procedural changes according to the local authority / client’s requirement & regulation updates.
• To periodically monitor and execute the lifting work improvement at lifting site inclusive all facilities/tools.

Job Requirements:

• Minimum 5 years site experience to oversee the activities of the various lifting supervisors on site, completed the "appointed persons - lifting operations course" conducted by IES or equivalent course approved by the engineer.
• Possess a Bachelor Degree in relevant engineering field.
• Have relevant experience and direct involvement in assembling, traversing and operation of lifting frame and/or any other systems adopted by the Contractor, and safety assessment of heavy lifting work.
• Able to communicate well (spoken and written).

JOB DESCRIPTION

• Inspects, maintains and repairs various types and brand of air conditioner system, including split units, window and casement units.

• Performs regular preventive maintenance and corrective works on air conditioning system.

• Diagnoses electrical and mechanical defects and malfunctions.

• Carries out repair works such as replacement of air con compressor, fan coil motors etc.

• Any other tasks, when required by the immediate supervisor.

• To carry out air conditioner maintenance, servicing and repair works

•Troubleshoot error code and malfunctions of air-conditioning system

•Ensure all works are carried out safely with safety procedures

Requirements:

• Minimum 10 years of Aircon engineering supervisory experience
• Education not much required, But Preferred overseas experience.
• Education is not necessary. Must practically Aircon experience.
• Must able to work as a Engineer
• Willing to work on rotating shifts,
• Able to do hardworking,
• Willing to work weekend and public holiday when required.

Job Description

• Ensure effective implementation of the Quality Management Systems on projects and report on system performance
• Support in the planning and management of internal quality and environmental audits covering all operations and to take an active role in QAQC audits
• Monitor quality reports and other documents to ensure that all relevant project quality records are properly controlled and maintained
• Conduct inspections and testing exercises according to the Quality Management Systems
• Identify potential technical issues and provide recommendations to rectify them
• Coordinate with clients, project teams and external parties on project quality related matters
• Any other other ad hoc duties assigned.

Job Requirments

• Candidates with LTA project experience are highly preferred
• Preferably Manager specialized in Engineering - Civil/Construction/Structural or equivalent.
• Proficiency in Microsoft application (Excel, Word, and PowerPoint)
• Able to work independently and willing to learn
• Good communication and interpersonal skills

. Understanding the construction plan of the project

. Determining the time constraints to complete the job

. Identifying the raw material and the manpower required

. Supervising along with the contractor the construction site

. Managing daily activities on the site

. Ensuring the raw materials used are as per the specifications

. Ensuring the subcontractors are following the blueprints

. Working in collaboration with Engineers , Architects, Contractors and other team members

. Providing recommendations on improving efficiency and reducing costs

. Coming up with technical solutions for problems that are causing a delay in the projects

. Maintaning the documentation of the construction projects

. Filling documents to the local jurisdiction as and when required

. Presenting the reports to the Project Leaders and Executives

. Adhering to all the environmental and safety standards

-----------------

We regret to inform you that only shortlisted candidates will be contacted

Roles & Responsibilities

- To perform a variety of administrative and clerical tasks.

- Providing support to our managers and employees, assisting in daily office needs and managing our company’s general administrative activities.

- Able to work independently and confidence

- Willing to learn

Job Description

• Design engineering structure according to technical requirements as defined by contract, class rules and specific standard within quality, time and cost given.
• Prepare and provide design calculation / BOM / general arrangement / sectional drawings.
• Produce accurate assembly / detail drawings within an agreed time scale.
• Ensure drawing list are updated.
• Ensure production drawings and documents are completed and issued on time.
• Update and understand know-how on rules, class, authorities and etc.
• Prepare 3rd party approval submission documents.
• Investigate scope of re-work / modification brought forward by the Production.
• Able to use STAADPro is a must to perform design calculation.
• Perform engineering coordination / drafting (drawings) / checking as and when required.
• Any other duties as assigned.

Job Requirement

• Degree / Diploma in Engineering or equivalent.
• Minimum 5 years of relevant experience preferably in similar industry.
• Software knowledge in STAADPro is a must.
• Hands on AutoCAD and drafting knowledge.
• Organised, meticulous, team player with sense of responsibility.

To maintain the operational capability of the incineration plant such as performing scheduled maintenance such as preventive and predictive programs of the plant equipment and machinery. Performing daily inspection on equipment to look out for anomalies and having good documentation on various records and reports for the maintenance operation. Candidate shall be equipped with the ability to understand system schematics and drawings.

Maintenance

· Ensure the plant day-to-day operation is functional at its optimum level.

· Assist the Engineer and lead a team of skilled worker in the maintenance and expeditious repair of the plant’s mechanical equipment

· Performing scheduled maintenance such as preventive and predictive programs of the plant equipment and machinery

· Perform daily inspection on equipment.

· Analyze breakdowns, diagnose faults and execute the required rectification process. ]

· Take part in plant overhaul activities.

· Ensure close coordination with various parties for maintenance activities.

· To ensure that equipment maintenance & service procedures and programs are effectively implemented consistent with sound engineering practices.

· Ability to understand system schematics and drawings.

· Assist the engineer in any other duties as required.

Requirements

· Minimum Diploma in Mechanical or Electrical

· Minimum 8 years’ experience in Waste to Energy Plant

· Boiler Attendant / Steam Engineer Certification will be a plus

· Medically fit.

· Proficient with Microsoft Word, Excel and PowerPoint.

· Able to work 5.5 days a week and if required, including public holidays and weekends.

· Shift work is not required.

· Team player that is proactive and able to work under pressure.

· Maintaining a positive outlook in the event of adverse condition.

· Process Plant WSH Supervisor Certificate and above.

· Confined Space Supervisor and above.

· Work At Height Supervisor and above.

To maintain the operational capability of the incineration plant such as performing scheduled maintenance such as preventive and predictive programs of the plant equipment and machinery. Performing daily inspection on equipment to look out for anomalies and having good documentation on various records and reports for the maintenance operation. Candidate shall be equipped with the ability to understand system schematics and drawings.

Maintenance

· Ensure the plant day-to-day operation is functional at its optimum level.

· Assist the engineer and lead a team of skilled worker in the maintenance and expeditious repair of the plant’s mechanical equipment

· Performing scheduled maintenance such as preventive and predictive programs of the plant equipment and machinery

· Perform daily inspection on equipment.

· Analyze breakdowns, diagnose faults and execute the required rectification process. ]

· Take part in plant overhaul activities.

· Ensure close coordination with various parties for maintenance activities.

· To ensure that equipment maintenance & service procedures and programs are effectively implemented consistent with sound engineering practices.

· Ability to understand system schematics and drawings.

· Assist the engineer in any other duties as required.

Requirements

· Minimum Diploma in Mechanical or Electrical

· Minimum 2 years’ experience in Waste to Energy Plant

· Boiler Attendant / Steam Engineer Certification will be a plus

· Medically fit.

· Proficient with Microsoft Word, Excel and PowerPoint.

· Able to work 6 days a week and if required, including public holidays and weekends.

· Extended working hours might be required if urgent work needs to be done to machinery or plant.

· Shift work is not required.

· Team player that is proactive and able to work under pressure.

· Maintaining a positive outlook in the event of adverse condition.

· Process Plant WSH Supervisor Certificate and above.