• Report to Construction Manager
• Manage and oversee construction activities near existing SPPG tunnel/GTP
• Coordination between client, consultant and sub-contractor(vendors)
• Ensure compliance with safety procedure and regulations
• Carry-out regular inspections and regular checks of concerned construction activities
• Resolve technical and engineering issue
• Ensure proper documentation (including Risk assessment/Method statement) and record-keeping of construction activities
• Ensure the activities comply with the local Authorities’ quality, environment, health & safety requirements and Clients’ General Specification
• Ensuring Permit to Work (PTW) is verified and valid for assigned duties.

Job Requirements:

• Degree in Civil Engineering from a recognized university, accredited by the Singapore PE Board
• Registered Resident Engineer with IES and valid certification in Singapore (Mandatory)
• Minimum of 1 year of Engineering experience
• 2 years of experience in the supervision of construction projects preferred
• Progress oriented, team player
• Technical expertise and knowledge in Civil Engineering Construction especially piling/RC works
• Proficient in Microsoft Offic and Auto CAD
• Attained CSCPM/BCSS/Confined space/Work At Height
• Good interpersonal skills and hardworking
• Location : Woodlands
• Project : Viaducts

KEY DUTIES AND RESPONSIBILITES:

· Develop detailed project plans, including scope, goals, deliverables, resource allocation, timelines, and budgets.

· Planning & execution of all new and retrofit projects related to utilities & facilities.

· Ensuring the best available technologies are incorporated by design.

· Techno commercial evaluations of consultants, vendors, and contractors.

· Delivering the project within the budget and timeline approved.

· Responsible for relevant project costing and annual budget preparation related to engineering, facilities and EHS.

· Coordinating with statutory authorities for relevant approvals.

· Complying with operational and personnel standards, regulatory and statutory requirement to ensure efficient, reliable, and uninterrupted operation.

· Ensure smooth handing over of the project to end-users, coordinate and ensure deliverables as per plan.

· Ensure the site's facilities are kept to the highest standards for cGMP requirements, including Purified water system, WFI System, HVAC system, EMS, BMS, Boilers, fire safety, security, pest control, cleaning services and waste removal.

· Responsible for development SOPs and quality standard for site with following of site QMS procedures.

· Ensure to meet the required regulatory requirements (e.g. HSA, FDA etc.) and keep the site audit ready for all the time.

· Responsible for managing a team of vendors / contractors.

· To assist on any ah-hoc duties that have been assigned / task by the immediate Superior

Education:

· Bachelor’s / master’s degree in mechanical engineering or a related field. SCEM, Water efficiency Manager will be an added advantage.

· Project management certification: PMP or PRINCE2

Experience:

· Proficient / experienced in the Microsoft project software and project tracking.

· Proficient / experienced in AutoCAD.

· 3~5 years of experience in the green field / brown field area project management.

· Capability handles the pharma project from USD 2-5 million.

Soft Skills:

· Strong problem-solving abilities and analytical thinking.

· Excellent communication and teamwork skills.

· Ability to manage multiple projects and meet deadlines.

· Good investigation and report writing skills.

· Knowledge of industry standards and regulations.(GMP, PICs)

TO APPLY:

Candidates are encouraged to apply this position via email to [email protected] with the following information in the resume.

· Work experiences and job responsibilities.

· Current and Expected salary

· Reason for leaving.

· Date of availability

· Education background

We regret that only shortlisted candidates will be contacted.

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Implement established project plan; monitor progress and performance against the project plan, identify, resolve or escalate operational problems to minimize delay
• Analyse project requirement and perform standard technical calculations
• Coordinate the activities of external contractors to project integration and satisfactory standards of service
• Estimate the costs, resources and time required to complete the assigned phase of an engineering project and monitor activities, allocate resources and assign tasks to ensure targets are met
• Conduct project meetings and prepare regular reports to communicate the status of the project within and beyond the project team
• Set priorities, allocate tasks, and coordinate with project staff to meet project targets and milestones
• Any other duties to be assigned from time to time

Pre-requisites

• Bachelor’s Degree in Electrical Engineering
• Minimum 5 years of relevant experience in power and/or industrial plants construction projects required
• Hardworking, independent, resourceful, energetic and dynamic
• Ability to handle stress and be sensitive to deadlines.
• Proactive learner and ability to multi-tasks
• Willing to work long hours and under construction site conditions
• Project location: Jurong Island

Nanyang Technological University’s National Centre for Research in Digital Trust (DTC) is a Trust Technology Research Centre to execute a national program to help put Singapore into a strong trust hub. The key objective is to support efforts to create a trusted digital environment for people and businesses in the digital transformation by providing businesses and consumers with greater assurance and confidence as they digitalize. For more details, please view https://www.ntu.edu.sg/dtc

We are looking for a Research Engineer to develop, implement, and oversee techniques and systems in Trust Technology and related areas such as privacy, security and blockchain, which are important components of digital trust platforms. The role will focus on emerging technologies that engenders trust and espouse the values of fairness, safety, and privacy in digital technologies.

Key Responsibilities:

• Conduct research into trust technologies testing – translating algorithms, tools, and frameworks into working prototypes that can explain how research outputs can be productized into new capabilities.
• Work closely with Centre’s researchers to design and develop system implementation work from research into the product.
• Design and build working tools that can support the technology transfer of new capabilities to research partners and can be used to showcase the value of a given research outcome.
• Write and maintain technical documentation, presentations, and papers on research into trust technologies testing, helping to educate and raise the overall competency in emerging areas of trust technologies.
• Engage global partners and researchers to understand latest trends and advance Singapore’s mindshare in this domain.

Job Requirements:

• Bachelor’s degree in computer science/ engineering or related fields.
• Proficiency in Python; experience with Java, C/C++, Go, and PyTorch/TensorFlow is a plus.
• Proficient with Linux (e.g., Ubuntu, CentOS) and shell scripting with experience with cloud platforms (AWS, GCP, Azure) and containerization (Docker, Kubernetes). Familiarity with version control systems (Git) and collaborative development tools.
• Experience in developing and deploying machine learning models, especially in NLP and LLMs, including tasks like data preprocessing, feature extraction, and model training/evaluation. Strong knowledge of machine learning, deep learning (e.g., knowledge graphs, AI testing, machine unlearning).
• Experience in end-to-end ML system development (data exploration, feature engineering, model training/evaluation) with strong understanding of software engineering principles and best practices as well as attention to ethical considerations in AI, including data privacy and security.
• Ability to communicate technical concepts to both technical and non-technical stakeholders, with strong analytical, problem-solving, and collaborative skills
• Self-motivated, able to work independently in a fast-paced environment.

We regret to inform that only shortlisted candidates will be notified.

About Beca

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.

We are currently recruiting for experienced Senior Engineer - Electrical to join our Building Services team in Singapore.

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

In this role, you will be responsible to:

● Leading electrical services design for building projects

● Assume responsibility and undertake engineering tasks of increasing scope and complexity

● Responsible for analysis of information, production of design, checking shop drawings, tenders, proposals and mechanical report writing

● Assist in coordination of quality assurance and commissioning of designs with other disciplines and other design consultants

● In charge of jobs control, planning, monitoring, progress and job cost reporting

● Communicate effectively with the client, sub-consultants, contractors, and other parties relevant to the job

● Assist in assessment and review of designs prepared by others on behalf of the clients

● Liaise with authorities on plans submission and compliance

Key Requirements

· Degree in Electrical Engineering / Electrical Engineering degree recognised by Professional Engineers Board, Singapore will be an advantage.

· Minimum 5 years’ experience with 4 years in a consultancy environment

· Experience in leading roles for design & design management of commercial and/or institutional projects. Experience in data centre projects will be an advantage

· Familiarity with codes of practice, relevant regulations and a working knowledge of authority submission and approval procedures

· Competent user of relevant engineering software

· Excellent written & spoken communication skills in English

· Able to work independently & exercise initiative

· Excellent delegation and communication skills, which see you enlist the help of others to meet objectives

· A team, client and delivery focused working style

Job Highlights

• Career Advancement
• Medical & Telecommunication Allowance
• AWS & Variable Bonus

Ready to make a move?

We offer a comprehensive career growth and development programme along with a vibrant and supportive team environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for its people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply online now with your CV.

Please include the following information in your resume:

• Education background
• Work experiences
• Reason(s) for leaving (if any)
• Current and Expected salary
• Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore

Job Descriptions:

* Development & Implementation of Instrumentation & Control, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Electrical Control Design

* Implementation of Process Automation, Instrumentation and Control, Testing and Commissioning, Technical Support, Customer Service, PLC Programming, SCADA / HMI programming, Computer and Server, Industrial Networking

* Responsible for design & development, implementation, onsite testing & commissioning, support, documentation and training

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Relevant graduate degree for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance. Fresh graduates are welcome.

* Hands on experience in instrumentation implementation

* Knowledge of Building Automation & Process Control

* Experience in BMS / PLC / HMI process control / automation system, onsite commissioning

* Good technical skills in Allen-Bradley / Siemens PLC programming, SCADA

* Strong problem-solving and analytical skills

* Hardware configuration and software coding

* IT knowledge for Server/Client and Infrastructure

* Electrical control, instrumentations and control knowledge

* Customer orientated

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Able to interact well with vendors.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Nanyang Technological University’s National Centre for Research in Digital Trust (DTC) is a Trust Technology Research Centre to execute a national program to help put Singapore into a strong trust hub. The key objective is to support efforts to create a trusted digital environment for people and businesses in the digital transformation by providing businesses and consumers with greater assurance and confidence as they digitalize. For more details, please view https://www.ntu.edu.sg/dtc

We are looking for a Research Engineer to Support research in exploring mechanistic interpretability of vision-language models. Vision-Language Models (VLMs) are powerful tools for processing and understanding text and images. This research aims to study the processing of visual tokens in the language model component of VLM. The role will focus on analyzing the localization of object information, the evolution of visual token representations across layers, and the mechanism of integrating visual information for predictions.

Key Responsibilities:

• Conduct research and analyzing the localization of object information, the evolution of visual token representations across layers, and the mechanism of integrating visual information for predictions.
• Work closely with Centre’s researchers to design and develop research prototypes into the proof-of-concept systems.
• Design and build working tools that can support the technology transfer of new capabilities to research partners and can be used to showcase the value of a given research outcome.
• Write and maintain technical documentation, presentations, and papers on research into trust technologies testing, helping to educate and raise the overall competency in emerging areas of trust technologies.
• Engage global partners and researchers to understand latest trends and advance Singapore’s mindshare in this domain.

Job Requirements:

• Bachelor’s / Master’s degree in computer science or related field
• Ability to communicate complex technical concepts effectively to both technical and non-technical stakeholders, bridging the gap between research and practical application.
• Strong analytical and problem-solving skills, with a focus on developing innovative solutions for LLMs.
• Self-motivated and able to work independently, managing multiple tasks and projects in a fast-paced environment.
• Strong collaborative skills, with experience working in cross-functional teams.
• Keen attention to detail and commitment to high-quality deliverables.
• Understanding of ethical considerations and best practices in AI research, particularly concerning data privacy and security.
• Conduct research and analyzing the localization of object information, the evolution of visual token representations across layers, and the mechanism of integrating visual information for predictions.
• Work closely with Centre’s researchers to design and develop research prototypes into the proof-of-concept systems.
• Design and build working tools that can support the technology transfer of new capabilities to research partners and can be used to showcase the value of a given research outcome.
• Write and maintain technical documentation, presentations, and papers on research into trust technologies testing, helping to educate and raise the overall competency in emerging areas of trust technologies.
• Engage global partners and researchers to understand latest trends and advance Singapore’s mindshare in this domain.

​

We regret to inform that only shortlisted candidates will be notified.

Responsibilities:

1. Material research, planning and shipment coordination

2. Technical purchasing and project cost management

3. Project workflow management and execution

4. Data collection and analysis

Requirements:

1. Strong organization skills; able to prioritise tasks, organise personnel, budgets and materials planning for each project

2. Ability to work under demanding situations, adhere to strict timelines and in meeting deadlines.

3. Ability to communicate effectively, both written and verbally.

4. Ability to interpret demands effectively and understand stakeholders’ needs, especially with those of foreign entities.

5. Strong leadership skills to motivate and lead the team.

For Fresh Graduates

A degree in a related field, including chemical engineering, environmental science, civil, mechanical or electrical, is preferred.

Job purpose

To monitor and maintain the networks, application softwares and hardware systems in the company; providing technical support to local and overseas staff via remote or in person and proposing cost-saving solutions to meet the needs.

Duties and responsibilities

Providing first-level helpdesk and end-user support.

· Installing and configuring computer hardware, software, systems, networks, printers and handheld scanners.

· Monitoring and maintaining computer systems and network infrastructure from end to end – patch panels, UPS, routers, switches, wireless access points, Firewalls, internet connectivity, VPN connectivity etc.

· Administration and management of physical and virtual servers (patching, updating etc.).

· Administration of user accounts (Active Directory, LDAP).

· Troubleshooting system and network problems and diagnosing and solving hardware or software faults.

· Repairing equipment and replacing parts as required.

· Managing backup jobs.

· Providing support, including procedural documentation and relevant reports

· Supporting the roll-out of new applications.

· Maintaining records of software licenses.

· Managing IT Assets, inventory and other IT supplies.

· Source and co-ordinate with vendors for procurement, maintenance and support issues.

· Testing and evaluating new technology.

Requirements

· Proven 3 – 4 years of hands-on experience working in an end-user IT Support role or computer operations environment.

· Experience in installation, setup, configuration, migration, upgrading and maintenance of servers, PCs, OS, software and other related peripherals.

· Required technical troubleshooting skills for Windows 10, 11.

· Knowledge on Windows Server 2012, 2016 and 2021.

· Managing of Action Directory and User email accounts, Symantec Endpoint Protection and Veritas Backup Exec Virtualisation preferably VMware.

· Basic networking protocol (DNS, DHCP, VLAN) with advanced printer / peripheral device troubleshooting.

· Support for handheld smartphones and tablets.

· Monitor and ensures compliance with company’s IT Security policies.

· Patch management.

· Able to work independently and carry out day-to-day IT support with good analytical problem-solving, time management and decision making skills.

· Willingness to take ownership of task and express interests in learning new technologies and systems.

· Cyber-security background will be an added advantage.

Working conditions

· Singapore based.

· 5.5 work days / alternate Saturday

Position Responsibilities

High School Educator Responsibilities

• Foster a sense of student belonging by cultivating joy and purpose throughout the High School.
• Contribute to our commitment to extraordinary care by acting as an advisor for a small group of students and by teaching our advisory social-emotional learning curriculum.
• Identify essential learning and use a planning framework with standards, learning targets, real-world connections, and a culturally responsive curriculum.
• Design quality standards-based formative, summative and self assessments that provide students with frequent feedback and communicate students’ growth and achievement.
• Plan and implement engaging learning experiences that are inquiry-based collaborative, culturally responsive, and differentiated.
• Respond to learners’ diverse needs using responsive, measurable, and research-informed interventions and extensions.
• Utilize flexible, rigorous and adaptive Tier I instructional practices to allow students of all diverse language and learning styles to effectively access learning.
• Possess experience and/or demonstrated skills facilitating restorative conversations when supporting student behavior in the learning environment.
• Collaborate as a member of a Professional Learning Communities (PLCs) that creates a supportive community, plans curriculum, gives and receives feedback, and engages in professional learning and reflection.
• Actively engage in professional learning and growth through regular observation and feedback cycles, walkthroughs, and reflection with Professional Learning Community Coach and Principals, and participate in external opportunities.
• Design and implement inquiry-based learning experiences in and beyond the classroom to prompt learners to question, investigate, create, and reflect.
• Demonstrate an understanding of interdisciplinary connections, teaching and/or learning.
• Creatively leverage flexible learning spaces and flexible grouping to provide for a variety of learning styles, ability levels, and educational backgrounds
• Integrate technology in innovative ways in daily instruction to enhance learning.
• Engage with students in meaningful activities beyond the classroom that extend student learning experiences (coaching, organizing field trips, sponsorship of clubs, events, overseas travel and/or community service projects, etc.).
• Strive for continuous self-improvement as a life-long learner.
• Model the Core Values in your interactions with all members of the school community.
• Lead and engage with students in meaningful activities beyond the learning spaces, which extend learning experiences for students (i.e. travel on Interim Semester, sports coaching, field trips, sponsorship of clubs, attend events beyond the school day, community service projects, etc.)
• Connect with and be available to parents and students during and outside of school hours (in person and via email communication)

Role-Specific Responsibilities

• Use diagnostic assessment to determine students’ strengths and needs in literacy, numeracy, and/or executive function.
• Write/update students’ Individual Education Support Plan using data to inform SMART goals
• Plan data-informed interventions to support the development of reading, writing, math, and executive function skills.
• Use a variety of progress monitoring strategies to monitor student progress toward their goals
• Collaborate in Professional Learning Communities to review data and share progress monitoring documentation and planning for next steps for a plan of intervention.
• Collaborate with PLC members, students, and parents to write Individual Education Support Plans with SMART goals as well as Individual Accommodation Plans
• Collaborate with subject-area teachers and implement a broad range of strategies to support students in a co-taught, inclusive classroom

Position Requirements & Qualifications

• Bachelor’s Degree in relevant field
• Master’s Degree in relevant field preferred
• Teaching license or a degree in education
• A certification in special education preferred
• At least two years full time teaching experience preferred
• Extensive experience working with students with a variety of learning differences
• Experience differentiating instruction and assessment based on student learning needs
• Experience tracking effectiveness of teaching strategies or interventions with the use of progress monitoring documentation
• Experience with tiered supports including but not limited to Response to Intervention (RTI) framework or Multi-Tiered Systems of Support (MTSS)
• Comprehensive knowledge of current best practices in teaching early literacy and numeracy skills
• Demonstrate proficiency in implementing strategies and interventions to support the development of executive function skills.
• Extensive experience in collaborating in Professional Learning Communities to review data and share progress monitoring documentation and planning for next steps for a plan of intervention.
• Must be confident in their ability to teach any student, and have a willingness to provide intervention regardless of the significance of disability or learning need(s)
• Standards-based curriculum experience preferred
• Excellent verbal and written English language skills
• Confident technology skills for teaching and administrative tasks

Working Requirements

• Sponsoring and/or coaching after school arts, activities or sports are part of the responsibility of the professional educator. Therefore, faculty shall be available to direct, coach and/or sponsor an athletic team or other extra curricular activity or arts. Each faculty member is expected to do a minimum of one category 1 activity or sport per year.
• Mandatory attendance of weekly faculty meetings beyond the school day, new hire orientation and educator professional learning days.
• Chaperone and participate in a minimum of four evening and/or weekend school activities each year, as assigned (including "Back-to-School Night", learning conferences, musicals, concerts, and more).
• SAS faculty members are expected to commit to chaperoning learning experiences including those requiring overseas and/or overnight excursions, including but not limited to High School Interim Semester, IASAS Music and other curricular and co-curricular trips.

COMPANY DESCRIPTION

REC Group is an international pioneering solar energy company dedicated to empowering consumers with clean, affordable solar power through high-quality solar panels with a leading power density. As Solar's Most Trusted, REC is known for its patented innovations and multiple award-winning products with reliable long-term performance. The cornerstone for REC's strong reliability is advanced and highly efficient manufacturing using Industry 4.0 practices. Founded in 1996 in Norway, REC has always been committed to a low carbon footprint in its solar materials and panels. REC is headquartered in Norway with operational headquarters in Singapore and regional hubs in North America, Europe, and Asia-Pacific. As of December 2021, REC is part of Reliance Industries Limited, India's largest private sector company with revenues of USD 104.6 billion.

Find out more at recgroup.com

RESPONSIBILITIES

Be the key driver to ensure that REC Modules deliver world class leading top quality product through well controlled process and manufacturing flow, from material supplies to product deliveries.

Be key driver to ensure improvement, qualification and implementation of new processes/products including changes and/or new product introduction, are in-line with the overall production performance enhancement targets.

Support production line issues with appropriate and permanent corrective solution, as and when necessary.

In plant expansion phase, work closely with process/equipment/technology and contribute to establish good product quality and specification.

Establish investment proposals and projects in order to utilize best available practice and competence.

Support managements' directives and projects as and when needed.

Possessed very good ability in project management, providing key milestone, timeline and execution, overseeing the completion of project on time.

Candidate working in Cell PD is responsible for development new cell processes or optimize existing processes in Solar cell Manufacturing.

Candidate will need to work with external suppliers to bring in new materials or integrate new processes into the current cell processing line. Candidate will also work on continuous improvement projects to improve the cell efficiency and cost of a solar cell.

Candidate with semiconductor or solar cell background would have an added advantage.

Able to mentor junior cell PD engineers and be a role model for them.

Depending on the competencies developed, process development will be required to be rotated to different departments as required by management.

• Degree in engineering disciplines (electrical, mechanical, mechatronics, material science or related discipline)
• 5 years or more working experience
• Knowledge in product design environment.
• Knowledge of interpreting design intent for DFM and DFA
• Strong knowledge of semiconductor or PV.
• Knowledge in Prototype PV Module design functionalities that ensure good quality and manufacturability would be an advantage
• Knowledge of product functionality of PV modules/panels would be an advantage
• Good presentation and communication skills
• Must be able to work independently and knowledgeable in project management
• Supportive in other job functions assign by superior

Your Job

Molex Singapore is seeking for a Process Outsource Engineer to support production process improvements for subcontractors outside Molex Singapore, ensuring quality, yield, and productivity enhancements. You will be responsible for the smooth release of new products to manufacturing, resolving process-related issues, and tracking assets.

Our Team

This role involves extensive collaboration with various internal departments, subcontractors, fabrication vendors, and machine vendors/suppliers.

What You Will Do

• Develop and continuously improve the sub-con quality system to meet agreed goals.
• Monitor project deadlines and budgetary expenditures.
• Collaborate with Sub-Con, Product Design, QA, and Components Engineers to ensure new product release for manufacturing, including full qualification.
• Implement productivity, quality, and cost reduction programs, as well as machine and process improvements.
• Address and resolve quality and process-related issues at sub-cons for assigned products.
• Provide production support to resolve sub-con quality/process problems.
• Manage product capacity expansion, including duplicating machines/fixtures if necessary.
• Qualify all tooling releases to manufacturing at sub-con.
• Maintain proper documentation control for process capability studies, process FMEA, SOPs, process specifications, OJT task analyses, training records, production records, and assets.
• Oversee equipment transfers from in-house to sub-con, ensuring machine setup and production qualification.
• Provide coaching and supervision for new engineers.

Who You Are (Basic Qualifications)

• Degree or Diploma in Mechanical, Manufacturing, or Production Engineering.
• Minimum of 4 years of experience in a similar position (for external candidates) or a minimum of 2 years in a Process Engineer position at Molex (for internal candidates).
• Proficient in process improvement.
• Knowledge of quality systems.
• Ability to identify and propose solutions for directional errors.

What Will Put You Ahead

• Ability to work effectively in a team environment.
• Willingness to take on challenges and demonstrate initiative.
• Six Sigma certification

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Your Job

You will be responsible for the design and development of new high-speed custom automation. You will lead the machine development process and guide the activities of tooling design engineers, overseeing the machine lifecycle from quoting to mechanical design and delivery scheduling.

Our Team

You will collaborate closely with the Mass Production, Quality, Product Design, Tooling Design, and Machine Build Teams. This position is part of the DSS Manufacturing Services division and focuses on automation shop activities, design, and project management.

What You Will Do

• Provides assembly feasibility (Design for Manufacturability) and equipment cost estimates to the new product development team.
• Works with engineering department to determine design complete dates. Prioritizes work and delegates work assignments to designer engineers.
• Designs new connector and cable manufacturing machinery utilizing the Siemens NX CAD software.
• Assists in developing and executing the machine qualification plan.
• · Provides technical support for the launch of equipment produced by the LR-Automation Team. Responsibilities will include traveling to mass production facilities for machine install & qualification, training of technicians and operators to ensure the proper and safe operation of equipment and developing re-tooling strategies.
• Attends Design Reviews and PFMEA’s while working with design engineers to improve current and future designs of automation.
• Tracks projects using internal methods for summarizing component cost, labor, and leadtime. Develops accurate, up-to-date BOM’s and Spare Tooling Lists
• Understands, supports, and contributes to complete projects according to internal product development procedures, TQM and IS/QS-9000 requirements. Embraces Six Sigma, International Standards Organization (ISO) and Environmental, and/or Health and Safety (EH&S) Management Systems by following stated policies and procedures.
• Performs other related duties as assigned by management.
• International Travel: Up to 20% per year.

Who You Are (Basic Qualifications)

• Bachelor's degree in Mechanical Engineering.
• 5+ years of mechanical design experience.
• 3+ years of project management experience.
• Proficiency in Siemens NX or a comparable 3D CAD package.
• Experience with high-speed synchronous, asynchronous, and flexible (robotics) assembly systems.

What Will Put You Ahead

• PMP Project Management Certificate along with a Bachelor's degree in Mechanical Engineering.
• Knowledge of machine building techniques.
• Experience in scheduling and budgeting.
• Design experience with electrical connectors or cable assemblies and/or automotive assemblies.
• Mechanical cam/linkage analysis experience and toolmaking knowledge.
• Familiarity with mechanical and electrical systems design standards and machine wiring & industrial electrical logic.

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Your Job

As a Product Design Engineer specializing in IO connectors, your primary focus will be on supporting the development and manufacturing of new products. This will involve collaborating with manufacturing teams to review and provide feedback on the feasibility and plant capability of new concepts. You will also conduct analysis activities such as Proof of Concept (POC), Finite Element Analysis (FEA), and Tolerance Analysis to ensure product performance and integrity.

Our Team

You will be reporting to Manager, Product Design

What You Will Do

• Support of new Product Development and manufacturing for IO connectors.
• Review new concepts with manufacturing and provide feedback on feasibility and plant capability
• Support analysis activities such as POC, FEA and Tolerance Analysis
• Provide alternative solutions to resolve gaps in achieving target specifications
• Manage activities related to FOT, FSV and DVP&R testing
• Support existing product already in production or launching.
• Provide Engineering support of customer quality issues to ensure product reliability
• Provide Engineering support to plant for cost reductions and yield improvements
• Create Product Modifications and series expansions to increase market share
• Other duties as assigned by Management

Who You Are (Basic Qualifications)

• Bachelor’s degree in engineering
• 3 years mechanical product design experience with electronic products
• Experienced with product development process
• Understanding of Tolerance analysis, DFMEA, FEA
• Attention to details, be creative, good interpersonal skills to work effectively with internal cross functional teams and external customers
• Self-starter with confidence to initiate action independently

What Will Put You Ahead

• Bachelor’s degree in mechanical engineering and similar work experience
• From connector industries
• 5 years with specific high speed data connector design knowledge in the commercial or consumer space
• Knowledge of SMT design and signal integrity
• Strong mechanical aptitude and experience with clean sheet new product development component design
• Advanced tolerance stack understanding and risk mitigation skills
• Familiar with the component manufacturing environment, understanding of industry quality standards and requirements
• Basic knowledge on component design (injection, diecasting, sheet metal stamping)

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Your Job

You will be responsible for the design and development of new high-speed custom automation electrical control systems, machine software, and user interfaces. Your creativity is key to producing easy-to-operate, safe, on-time equipment that will give Molex a competitive advantage in the marketplace.

Our Team

You will be working closely with Mass Production, Quality, Product Design, Automation Mechanical Design, and Machine Build Teams. This collaborative environment ensures that all aspects of automation and manufacturing are seamlessly integrated and optimized.

What You Will Do

• Provides controls feasibility and equipment cost estimates to automation development team.
• Works with mechanical engineering department to determine design complete dates. Prioritizes work to fulfill deadlines.
• Specifies Control Hardware and generates Bills of Material, Designs Control Panels and Enclosures, Creates Electrical & Pnuematic Schematics.
• Assists in executing the machine debug, qualification, and installation
• Provides technical support for the launch of equipment produced by the LR-Automation Team. Responsibilities will include traveling to mass production facilities for machine install & qualification, training of technicians and operators to ensure the proper and safe operation of equipment and supports any software changes in the field.
• Attends Design Reviews and PFMEA’s while working with mechanical engineers to improve current and future designs of automation.
• Tracks projects using internal methods for summarizing component cost, labor, and leadtime. Develops accurate, up-to-date BOM’s and Spare Parts Lists
• Understands, supports, and contributes to complete projects according to internal product development procedures, TQM and IS/QS-9000 requirements. Embraces Six Sigma, International Standards Organization (ISO) and Environmental, and/or Health and Safety (EH&S) Management Systems by following stated policies and procedures.
• Performs other related duties as assigned by management.
• International Travel: Up to 20% per year.

Who You Are (Basic Qualifications)

• Associate's degree in Electrical Engineering or Electrical Engineering Technology.
• 3+ years of Control Panel Design & PLC Programming experience.
• 2+ years of Project Management experience.
• Proficiency in Yaskawa NON-IEC PLC Programming Language.
• Experience in generating industrial electrical schematics, including safety guarding standards.
• Expertise in the design and documentation of machine controls.
• Strong computer skills and the ability to read and interpret electrical and pneumatic drawings.

What Will Put You Ahead

• Bachelor's degree in Electrical Engineering.
• HMI Programming experience (Redlion, Pro-Face).
• Experience with Vision Systems (Cognex or Keyence).
• Scheduling and budgeting experience.
• Design experience with electrical connectors or cable assemblies and/or automotive assemblies.
• Some PC language programming skills (.Net or C++).

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Your Job

As a Product Design Engineer specializing in IO connectors, your primary focus will be on supporting the development and manufacturing of new products. This will involve collaborating with manufacturing teams to review and provide feedback on the feasibility and plant capability of new concepts. You will also conduct analysis activities such as Proof of Concept (POC), Finite Element Analysis (FEA), and Tolerance Analysis to ensure product performance and integrity.

Our Team

You will be reporting to Manager, Product Design

What You Will Do

• Support of new Product Development and manufacturing for IO connectors.
• Review new concepts with manufacturing and provide feedback on feasibility and plant capability
• Support analysis activities such as POC, FEA and Tolerance Analysis
• Provide alternative solutions to resolve gaps in achieving target specifications
• Manage activities related to FOT, FSV and DVP&R testing
• Support existing product already in production or launching.
• Provide Engineering support of customer quality issues to ensure product reliability
• Provide Engineering support to plant for cost reductions and yield improvements
• Create Product Modifications and series expansions to increase market share
• Other duties as assigned by Management

Who You Are (Basic Qualifications)

• Bachelor’s degree in engineering
• 3 years mechanical product design experience with electronic products
• Experienced with product development process
• Understanding of Tolerance analysis, DFMEA, FEA
• Attention to details, be creative, good interpersonal skills to work effectively with internal cross functional teams and external customers
• Self-starter with confidence to initiate action independently

What Will Put You Ahead

• Bachelor’s degree in mechanical engineering and similar work experience
• From connector industries
• 5 years with specific high speed data connector design knowledge in the commercial or consumer space
• Knowledge of SMT design and signal integrity
• Strong mechanical aptitude and experience with clean sheet new product development component design
• Advanced tolerance stack understanding and risk mitigation skills
• Familiar with the component manufacturing environment, understanding of industry quality standards and requirements
• Basic knowledge on component design (injection, diecasting, sheet metal stamping)

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Position Overview

Be responsible to research and develop innovative computer vision/deep learning algorithms for image applications.

Responsibilities

1. Research, develop and optimize computer vision/deep learning algorithms for image applications, such as, object recognition, face recognition, video analytics, image quality enhancement, and 3D reconstruction.

2. Explore, design and implement new algorithms/features according to marketing requirements.

3. Algorithm testing and verification.

4. Algorithm integration in system architecture.

Requirements

1. Ph.D. or MS with equivalent practical experience in Computer Science or Electrical Engineering or related disciplines such as Applied Mathematics/Statistics.

2. Broad knowledge in various computer vision related topics such as deep learning, object recognition (detection, classification, segmentation) and tracking, stereo, and/or 3D reconstruction; candidate with image sensor knowledge is a plus.

3. Strong knowledge and extensive hands-on experience of independent algorithm research; candidate with strong mathematics background is a plus.

4. Excellent C/C++ programming skills, proficient with scripting languages (e.g. Python or Matlab), and extensive experience with OpenCV.

5. Excellent verbal and written communication skills.

After Sales Executive

by Charmaine Soh [R24122333]

Benefits:

• S$3000 basic +++++++++++
• 5 Days work week (Monday to Friday, 9am to 6pm)
• Company transport available (Pioneer, CCK, Potong Pasir, Yee Tee )

Responsibilities:

• Arrange export shipment to distributors/customer from YASC (Drop shipment and Export shipment)
• Prepare and handle commercial documentation like invoices/ delivery orders/shipping documents, etc using in-house systems RPMS
• Coordinate shipments / cargo collection with warehouse department
• Prepare certificates required for shipments (SMF/COO/COQ etc)
• Prepare Letter of Credit submission to bank
• Liaise with external vendors like freight forwarders, clearing houses, 3rd party logistics, delivery contractors, etc.
• Process manual purchase orders and shipping instructions to other vendors in Japan/America/Europe/China/Indonesia/Thailand/India
• Negotiate rates and contracts to optimize delivery load and cost
• Plan and monitor inbound shipment/freights from overseas and local suppliers
• Track and monitor cost of unloading and loading
• Investigate claims made by distributors for any shortages, mis-supply, defective parts, etc with warehouse person in charge
• Prepare orders and monthly reports when necessary

Requirements:

• Nitec & above
• Min 3 years of relevant experience

Responsibilities for Civil Engineer
Follow safety rules, guidelines and standards for all projects.
May plan, assign and supervise the work of others.
Review of reports and plans prepared within the office.
Coordinate and manage any field survey tasks and personnel.
Liaise with clients and agencies, subcontractors, and design teams on projects.
Plan, organize, and carry out pavement evaluations and investigations.
Engage with clients to define and achieve a successful outcome.
Coordinate with local and nationwide teams for project delivery.
Analyze survey reports, maps, and other data to plan projects.
Participate in team meetings, all staff meetings, and other non-billable planning sessions.
Work with the engineering team on the production of design drawings.
Evaluate, select, and apply standard engineering techniques and procedures.
Provide cost estimates and budget projections for technical proposals.
Write and review/approve reports and specifications and make presentations.
Assist with/review scope, budget, and schedule of new project tasks.
Develop and apply advanced engineering solutions to complex problems.
Perform independent research and analysis for significant and complex engineering projects.
Conduct field studies and surveys to collect technical data.
Contribute to company standard detail and specification development and updates.
Prepare design reports and construction plans using local and state standards.
Willingness to travel to construction site locations is expected.

Qualifications for Civil Engineer
Diploma in civil engineering, construction engineering technology, or electrical engineering or equivalent experience.
Experience with AutoCAD and CAD Software.
Prior experience in a consulting position.
A leader and problem solver with a demonstrated collaborative work ethic.
Experience with calculus and statistics.
Demonstrated skill in project design.
Fluency in surveying and site design.
Fluency in sediment control, erosion control, sanitary sewer management, and digging.
Strict attention to detail.
Can produce cost estimates.

1) Oversee Project , liaise with Qualified Persons/Architecs , contractors

2) Technically competent

3) Plan and oversee project schedule

4) Attend to site meetings as and when required

5) Update superior site progress

Requirements

1) minimum 5 years experience in related field

2) Minimum Degree holder in related field

• Identifying deficiencies in mechanical processes and developing improvements

• Designing and developing prototypes

• Analyzing and testing prototypes and each revision of a device

• Supervising the development of computer-aided design (CAD) project drawings from junior team members

• Developing, initiating and managing all phases of projects

• Preparing documentation of critical analysis and providing suggestions for correcting errors

• Collaborating with Production Managers for proper allocation and tracking of resources

Element has an opportunity for an Engineer to join our rapidly expanding team in Singapore

In this role , you will perform variety of routine and non-routine testing assignments within civil testing operations and esure timely and accurate test results under minimal direct supervision

This role is based in Sungei Kadut Loop , Singapore.

Job Duties:

• Be accountable for accurate and timely release of testing data to customers and oversee standard and/or routine technical problem solving activities
• Interact with customers on technical issues and questions and provide input and support on business development opportunities with new or existing customers
• Provide formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders
• Assist in the professional development of novice technicians and engineers within the local laboratory and utilize an assortment of skill, methods, procedures and materials in advanced testing analysis
• Be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions

Job Requirements:

• Possess a Bachelors of Science degree in a science or testing related field with a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic/professional qualifications
• In-depth understanding of testing concepts and able to apply academic knowledge within the context of Element’s business
• A team player with advanced computer and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

• 5.5 Days work
• 8.30am to 5.30pm, 8.30am to 12.30pm
• Office at Kallang
• Yearly renewable contract + Completion Bonus

Responsibilities:

• Assist and support the Project Manager in handling and monitoring the progress of projects to ensure that work on site is on schedule
• Liaise and co-ordinate project site works with consultants, vendors/suppliers and sub-contractors
• Carry out site supervision and ensure work done on site is fully complied with specification and drawing
• Work with sub-contractors on shop drawings, equipment submission, site inspection and testing & commissioning matters

Requirement:

• Diploma in Mechanical / Electrical Engineering or similar
• Min 4 years of working experience involving ACMV and M&E works

Kindly submit your CV by clicking “APPLY Now” or email to "[email protected]"

EA Reg. No: R1880058 | Dylan