Responsibilities:

• Understand Contract Specification.
• Understand Marine Class and Regulatory Requirement, Piping, Special Item and Valve Material Specification.
• Understand P&ID and Piping routines.
• Good knowledge in preparing Technical specification and Material take off (MTO).
• Review and comments technical proposal from vendor.
• Technical Bid Evaluation for procurement.
• Monitor procurement process to meet Project Schedule.
• Review vendor certified Document (VCD).
• Monitor piping bulk material usage, surplus material and warehouse balance utilisation.
• Interface with vendor, other discipline lead, procurement, production, commissioning.
• Attend factory acceptance test (FAT) if required.
• Able to perform piping procurement related activities with no or minimum supervision.

Requirements

• Prefer to have at least 5 years of piping engineering related working experience or similar activities as describe above.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.
• Prefer to have experience in FPSO project, both topsides & marine.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability. We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies.

By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities:

• Understand contract and scope of work (i.e. SOW) and extracting the contract requirement into the checklist.
• Follow up FEED, P&IDs developed by consultant.
• Able to perform equipment sizing for pump required flow rate and pumping head together with NPSH verification.
• Able to perform piping line sizing.
• Able to develop system UFD/PFD.
• Able to create System Process Data Sheet.
• Develop/Update FPSO Hull common system related Topside, Safety, Hull marine systems in P&ID.
• Well understanding of common Class requirement such as ABS, LR and DNV Rules for marine system design.
• Well understanding of Equipment Isolation Philosophy and Specification from client.
• Well understanding of common piping material selection and application for marine system design as reference to International Standard.
• Able to incorporate the recommendations from the safety studies into the P&IDs and other relevant documents
• Able to review/comments technical proposal and vendor certified documents (VCD) from vendor (i.e. control valves specifications, PSVs specifications, etc.)
• Liaise with other discipline for relevant information that are needed for process design.
• Able to understand safety related drawing & documents (e.g. Safety Plan, Area Classification, Safety Signaling, Technical Specification for safety equipments, HSE Manual, Hydrant Location Study etc).
• Understand P&IDs and other related process, safety & instrumentation items
• Well understanding of the galvanic corrosion phenomena in the system design and able to avoid or resolve the galvanic corrosion related problems.
• Define control narrative and alarm set point for the instruments.
• System descriptions & all other kind of OIM (operation & maintenance manual)
• Sizing calculations (i.e. PSVs calculation, BDV calculations, SDV calculation, Control valves calculation).
• Carry out Hull Process related studies and prepare official report.
• Good knowledge in process simulation (PRO-II / HYSYS process simulator)
• Familiar System Design Safe Chart, Cause & Effect Matrix, Narrative Control Logic.
• Having knowledge to evaluate the relevant safety studies in FPSO design (i.e. HAZOP, HAZID, Radiation Study, Fire Explosion Study).
• Understanding of Working Environment Requirement and Human Ergonomic Design.
• Support commissioning activities and troubleshooting of system performance related issues.

Requirements:

• Prefer to have at least 5 years of Hull Process engineering related working experience or similar activities as describe above.
• Prefer to have experience in FPSO project, both topsides & marine.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8.00am - 5:15pm

Fri: 8.00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability. We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

The Senior Infrastructure Engineer is responsible to develop software based on design requirements and ensure software and subroutines are working to specification, program codes have conformed to standards and are delivered with quality meeting schedule and requirements. He will also implement systems in accordance to specifications & service level. Where relevant, perform the necessary system programming & configuration.

• Develop, test, and deploy scalable, secure, and high-performance web applications using Microsoft .Net framework, C#.Net, and ASP.Net

• Design and implement database solutions utilizing MS SQL Server and TSQL, ensuring optimal performance and data integrity

• Collaborate with cross-functional teams to gather requirements, analyze user needs, and translate business requirements into technical specifications

• Troubleshoot and debug issues in existing software applications, providing timely resolutions and enhancements

• Stay updated with industry trends and best practices, continuously enhancing technical expertise and contributing to the improvement of development processes

• Support existing applications and report generation

Required Skills:

• Bachelor’s degree in computer science, Engineering, or a related field

• At least 2 years of relevant experience in software development using .Net technologies

• Proficiency in Microsoft .Net framework, C#.Net, ASP.Net, and web technologies

• Strong experience in developing and optimizing database solutions using MS SQL Server and TSQL

• Solid understanding of software development methodologies, object-oriented programming principles, and design patterns

• Excellent problem-solving skills

• Effective communication and teamwork abilities.

Good to Have:

• Familiarity with PowerShell scripting for automation and system administration tasks

• Experience with Microsoft 365 (M365) platform and integration

• Knowledge of cloud platforms (e.g., Azure, AWS) and services

• Knowledge of google workspace.

Roles and Responsibilities:

• Responsible for preparation and delivery of process calculations, design drawings and other documents for water, wastewater treatment, and air treatment projects.
• Aware the requirements for full compliance to local authorities
• Conduct process calculations such as treatment unit sizing, pipe or ducting pressure losses for above mentioned projects.
• Design PFD, P&ID drawings for these projects.
• Select equipment or propose the parameters for selection of equipment such as pumps, fans.
• Design the layout and section views of the overall treatment system including process treatment units, equipment, and pipings and ductings with the help of drafters.
• Prepare other textual documents in process discipline such as control philosophy, datasheets.
• Evaluate technical documents from subcontractors and suppliers.
• Coordinate the works with mechanical engineers, and electrical, control and instrument engineers.
• Provide technical support to sales and project teams.
• Develop or provide design recommendations, value engineering and training to clients or co-workers
• Liaising with other departments (Project, QAQC or Commissioning) on schedule and deliverables timeline.
• Report to engineering manager.

Requirements:

• A recognized degree in environmental engineering, chemical engineering, mechanical engineering, or all other process related engineering.
• 3 years above work experience in water, wastewater treatment, or air treatment.
• Master degree holders with less experience will be considered.
• Proficiency in CAD, MS office or other design softwares.  Strong analytical and problem solving, critical thinking skills.
• Experiences in ultrapure water treatment, air treatment scrubbers, and thermal oxidizers are preferred.
• Good writing and communication skills.

• Manage & develop new customers based for spare part sales in the industrial, Marine & Offshore/Oil Gas market.
• Responsible for maintaining a high standard level of customer services and good customer relation.
• Responsible for maximizing a high level of profit margin and ensure meeting the pre-set sales target.
• Executing sales & marketing strategies to maximize opportunities in both domestic and international markets.
• Make sales presentation and provide technical support to customer
• Gather information on market demand, competition and latest technologies.
• Submission of weekly, monthly and quarterly reports.

The Field Service Engineer is responsible for providing technical expertise and support at customer sites within the maritime industry. This role involves installing, maintaining, troubleshooting, and repairing equipment and systems to ensure optimal performance and customer satisfaction.

Key Responsibilities:

Installation & Commissioning

· Perform installation, setup, and commissioning of maritime equipment and systems onboard vessels or at customer facilities.

· Conduct functional testing and calibration to ensure systems meet operational requirements.

Maintenance & Troubleshooting

· Diagnose and resolve technical issues on mechanical, electrical, and control systems.

· Conduct scheduled and preventive maintenance to minimize equipment downtime.

· Prepare detailed service reports and recommend corrective actions.

Customer Support

· Provide technical advice and training to customers to ensure proper system operation.

· Act as the primary point of contact for technical support during and after project completion.

Compliance & Documentation

· Ensure all work complies with industry standards, safety regulations, and company policies.

· Maintain accurate service records, inspection reports, and parts inventory.

Collaboration

· Liaise with internal teams (sales, engineering, and procurement) to ensure seamless service delivery.

· Provide feedback to improve product design, reliability, and customer experience.

The Lead Project Engineer is responsible for achieving project objectives within the defined time and cost framework while ensuring full delivery scope and quality. This role involves comprehensive project management, technical verification, and stakeholder communication to ensure customer satisfaction and successful project execution.

Key Responsibilities:

Project Objectives & Delivery

• Achieve project objectives within the defined time and cost framework.
• Ensure the delivery scope and quality meet the desired standards.

Customer & Stakeholder Liaison

• Liaise with the Customer, End User, and/or appointed Engineering Contractor.
• Ensure technical compliance with specifications.
• Technically verify customer requirements for order processing.

Project Management & Execution

• Manage projects within budget and on schedule until customer acceptance and hand-over.
• Oversee tender evaluation and provide Project Management support.
• Source third-party components and manage subcontractors.

Documentation & Data Management

• Manage documentation required by the project.

Team Leadership

• Lead and mentor other project team members when necessary.

Progress Reporting

• Report regularly to the Project Department Manager on project progress.

Responsibilities:

• Plan, design and supervise C&S engineering works (e.g. buildings, roads, drains, sewers, earthworks, underground buildings, temporary structures).
• Perform analysis and design for the project.
• Supervise the drafting of drawings related to design.
• Ensure all engineering works comply with relevant statutory standards, regulations and Codes of Practice.
• Manage project stakeholders, clients, design team, site team and other relevant parties.
• Coordinate with contractors, project team and design consultants.

Requirements:

• Possess a Civil and Structural Engineering degree recognized by the Professional Engineers Board of Singapore.
• Prior working experiences in structural engineering projects preferred.
• Familiar with structural engineering design to local Codes, Regulations and requirements,and Eurocode.
• Well verse in structural design software, e.g. ETABS, STAAD Pro, SAFE, SAP 2000, MIDAS, etc.
• Familiar with authority submission requirements for civil-structural works.
• Experience in design/project management works in BIM.
• Conversant with statutory code and requirements for site supervision, quality control procedure and construction administration.

• Prepare quality reports, perform process audit, develop & implements quality assurance standards, policies, processess & controls.
• Able to liaise & resolve with customers on quality related issues.
• Data compliation, co-ordination and facilitation of all internal and external audits, re-certification of ISO 9001.

Job Responsibilities

• Developing and designing network architecture and computer systems infrastructure.
• Overseeing the development, installation, and administration of computer systems.
• Monitoring computer systems and networks for viruses, malfunctions, and errors.
• Analyzing network data and infrastructure to determine inefficiencies and problems.
• Plan, design and manage AWS cloud implementations.
• Evaluate cyber security posture and recommend improvement.

Job Requirements

• Bachelor’s degree in Computer Science / Information Technology / or similar field.
• Solid working knowledge of networking (e.g. CCNA), Windows Domain, Office 365 administration, AWS cloud technologies and network security.
• At least 3 years of systems and network engineering related experience.
• Good communication skills in English.
• Good communication skills in Korean will be an added advantage

Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

ACMV Design/Site Engineer - Job Description

1. System Design: Create and optimise air-conditioning and mechanical ventilation systems, including load calculations and equipment selection.

2. Site Supervision: Oversee the installation, testing, and commissioning of ACMV systems on-site to ensure they meet design specifications and quality standards.

3. Technical Support: Provide on-site troubleshooting and technical guidance during construction, resolving any issues related to HVAC systems.

4. Regulatory Compliance: Ensure all designs and installations adhere to local and international codes and standards (e.g., ASHRAE,Green Mark).

5. Project Coordination: Collaborate with architects, contractors, and other stakeholders to ensure seamless integration of ACMV systems into the overall building design.

6. Client Communication: Interface with clients to address their needs, provide updates, and ensure satisfaction throughout the project lifecycle.

7. Minimum Requirements: Bachelor's degree in Mechanical Engineering, 3-5 years of experience in HVAC design and site supervision, proficiency in design and project management tools, and strong problem-solving skills.

ACMV Engineer Minimum Requirements

1. Education: Bachelor’s degree in Mechanical Engineering or related field; a diploma with extensive experience may be considered.

2. Professional Accreditation: Registration with the Professional Engineers Board (PEB) Singapore; Green Mark Accredited Professional (GMAP) is advantageous.

3. Experience: 3-5 years of relevant experience in HVAC or ACMV design, preferably within Singapore.

4. Technical Skills: Proficiency in HVAC design software (e.g., AutoCAD, Revit MEP); strong understanding of Singapore's SS 553, SS 530, and SS 531 standards.

5. Regulatory Compliance: Knowledge of local building codes, fire safety regulations, and BCA standards, including Green Mark Certification requirements.

6. Soft Skills: Strong communication, problem-solving, and project management abilities.

7. Continuing Education: Commitment to Continuous Professional Development (CPD) as required by professional bodies like IES or PEB.

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Basic Responsibilities:

Ø Conduct research on Atomic Layer Deposition technology for perovskite solar cells

Ø Effectively execute related experimental arrangements.

Ø Participate in maintaining laboratory equipment.

Ø Design, execute, and analyze experiments, and submit reports and analyses as required.

Ø Strong written and verbal communication skills.

Ø Other responsibilities, and job description subject to change at any time.

Education/Experience:

Bachelor's or master's degree in engineering or a similar technical discipline, majoring in materials, chemistry, physics, electronics, or a similar field.

Required Skills/Competencies:

Ø Experience with ALD process is preferred.

Ø Some experience working in a chemical/material/semiconductor laboratory.

Ø Basic understanding of materials science, semiconductor device physics, and chemistry.

Ø Ability to handle complex data, analyze, and communicate results effectively.

Ø Ability to coordinate activities between various engineering and operations teams. Good verbal and written communication skills.

The primary focus of the Senior IT Systems Engineer role is to leverage extensive expertise in network administration and systems support to provide expert technical guidance and assistance in resolving complex IT issues. This role requires close collaboration with other IT team members to ensure IT systems effectively support the organization's business objectives.

Responsibilities:

• Network management

- Responsible for company IT infrastructure network management, including the design, implementation and maintenance of computers networks with network hardware such as routers, switches, access points, and network circuits.

- Utilise network technology such as HP Aruba, ClearPass, Cisco switching and routing, Fortinet and Palo Alto firewall.

- Provide network administration support to ensure IT network operates optimally.

- Keep network diagrams and topology up to date.

- Maintain accurate company network documentation, such as IP Address management (IPAM), configuration changes and adhering to the network lifecycle management records.

• Network troubleshooting and monitoring

- Quickly identity and resolve network issues promptly to minimize downtime.

- Monitor network performance and troubleshoot connectivity issues including investigating and resolving network outages or performance bottlenecks.

• Network Configuration and lifecycle management

- Configuring and deployment of network equipment (e.g., routers, switches, firewalls) including tightening up security.

- To maintain and support office network and manufacturing plant production network.

- To patch and update the network devices to remediate the vulnerabilities and network flaws

• System and Network security support

- Assist in implementing and maintaining security measures (Server, Network, backup).

- Participate in vulnerability assessments and carry out remediation work.

• Systems administration and server support

- Assist in providing systems administration support on server management, WINTEL and Hyperconverged infrastructure platform, Dell Vxrail, VMware, HyperV.

- Be responsible for system backup and recovery management.

- To patch and update Systems OS/ firmware/ software to remediate the vulnerabilities.

• Serve as a point of escalation for network/server issue and be ready to be providing guidance and assistance when they encounter challenging problems.
• Responsible for liaising with network solution integrator and 3rd party expertise on IT Infrastructure network continuous improvement topics.
• Review company IT infrastructure network lifecycle management processes, procedures, policies and access account to comply with internal/external audit.
• Assist providing training and support to users. This may include training on how to use new software or hardware, providing helpdesk support

Key Required Experience and Skills:

• At least 5 years of network administration experience.
• Ability to work independently with minimal supervision.
• Strong technical skills, including knowledge of a wide range of IT networks and systems, and the ability to troubleshoot and resolve complex technical issues.
• A strong understanding of networking protocols, network security principles, cybersecurity best practices, and experience with network diagnostic, monitoring, and analysis tools.
• Excellent communication skills, with the ability to effectively communicate IT infrastructure network topics to both IT and non-IT stakeholders.
• Strong problem-solving skills, including the ability to identify and troubleshoot complex technical issues and develop and implement solutions.

· Certified or equipped with in-depth knowledge in server hosting operations, network, IT security and server/storage technology.

· CCNA, CCNP will be added advantage.

Job Responsibilities

· Create firmware specifications based on design rules, internal processes, and product/system requirements.

· Specify, design and develop signal processing algorithms, write codes for mircocontrollers in new and customized industrial sensors and HMI products

· Create and conduct review on test methodologies, validate design performance to specifications, debug embedded software, and document final design.

· Support production implementation in the embedded software perspective

· Collaborate with cross functional teams to sustain product lifecycle including customer complaints, failure analysis, etc.

· Liaising with Headquarter on the technical support and technology transfer.

· Verify regulatory compliance with support from head office.

Job Requirements

· Master / Bachelor in Electronic / Computer Engineering or equivalent.

· Minimum 3 years relevant experience in embedded software design and development.

· Strong knowledge and direct experience with C & C++ programming languages.

· Strong knowledge on digital electronics hardware including I2C, SPI, UART, PWM, ADC, USB, etc.

· Experience in designing, coding, debugging and validating on ARM Cortex microcontrollers are preferred.

· Knowledge on Python & Matlab would be advantage.

· Logical and strong interpersonal with analytical skills, strong team player and independent.

· Creative, self-driven and willing to acquire new skills and grow himself/herself.

Responsibilities:

• Develop/update hull material, architectural outfitting specifications and weight and centre gravity (W&CG) study.

• Coordinate/execute contract specification requirements and production inputs into engineering drawing/document.

• Prepare bill of material, review and selection of materials.

• Provide progress reporting and schedule management of engineering deliverables.

• Perform site visits to rectify engineering issues, determine existing conditions or verify new construction.

• Coordinate work and integration with other engineering disciplines, production, QA/QC and clients.

• Meet with vendors, client reps, accreditation representatives when required.

• Perform any other tasks as may be assigned by the supervisor.

Requirements:

• Minimum 5 years working experience in a marine/offshore industry either with shipyards or marine equipment manufacturers.

• Minimum Diploma or Bachelor's Degree in Structural Engineering or Marine Engineering.

• Ability to understand and perform structural analysis of the hull and structures, knowledge of Intergraph-SmartMarine 3D Software will be advantageous.

• Familiar with Marine & Offshore rules, regulations and requirements.

About our group:

Servo team spans the globe from Singapore to the United States. We invent and deliver servo electronics and code to satisfy all HDD product requirements. We also develop the required test and debug systems hardware and software to build, debug and validate servo systems in HDD products.

The is an individual contributor role, reports to the Manager, based in Singapore.

About the role - you will:

• Bring up newer generation and maintain existing preamp related driver code.
• To Involve in development of next generation servo demodulation channel and SOC.
• Failure analysis on servo demodulation related drive failures.
• Develop new algorithms to enhance the robustness of servo system, especially servo channel, Preamp and power management.
• Be part of the team responsible for improving servo code process.
• Be part of the global servo team to deliver best in class servo design.

About you:

• Not afraid to take on unfamiliar engineering tasks and willing to learn.
• Naturally inquisitive with a strong inclination in technical research.
• Flexible working hours to attend either early morning or evening conference calls with global counterparts.
• Able to work under pressure and meet aggressive deadlines without compromising work quality, while maintaining a positive attitude
• Take initiative, teamwork and self-motivated.

Your experience includes:

• Bachelor’s degree or higher and/or equivalent experience
• Experience in programming languages, such as C, Python and MATLAB.
• Familiar with real time embedded systems and digital signal processing.
• Familiar with Perforce, Jira systems will be an added advantage.
• At least five years’ experience of HDD servo systems, HDD manufacturing process, servo related failure analysis, servo test, data crunching and analysis.

You might also have:

• Strong analytical skills

Candidates are expected to performance quality inspections on incoming products.

He/she is also be expected to prepare/handle FAI reports and non-conformance reports.

Liaise with customers and suppliers on quality requirements and matters.

He/she who is familiar and have experience with C-parts (fasteners, small mechanical components etc) will be preferred.

Technical knowledge of mechanical components would be advantageous.

Familair with quality documentations. ISO.

Willing to learn and be a team player.

Candidates with relevent experience may be considered for senior positions.

Responsibilities:

• Report directly to Mechancial Department Head in all matters
• Supporting Engineers and Senior Engineers in day to day operation
• Supervise and ensure safety of vessel maintenance and repair works.
• Leading a team of Technician to perform repair and maintenance onboard ships
• Carry out troubleshooting and rectification of mechanical/diesel defects.
• Perform joint inspection and acceptance with ship representative
• Hands on work in rectification of defects and maintenance of mechanical components
• Ensure quality of work performed by ownself and technician deployed
• Assist in logistic support, lifting of equipment and workshop equipments etc

Requirements:

• Diploma in Mechanical / Marine Engineering
• Able to use IMTE Tools such as Torque Wrench, Pressure gauges, Internal and External Micrometer
• Able to work under pressure
• Able to work in a team
• Able to perform hands on work
• Able to work in shipyard environment – heat, grease, dust
• Proficiency in Microsoft Word, Excel
• Only Singapore Citizens will be considered for this role

Other Information:

• Location: Changi
• Transport provided at or nearby: Jalan Bahar, Pioneer MRT, Boon Lay MRT, Lakeside MRT, Jurong West & East, Jalan Bukit Merah, Choa Chu Kang MRT, Bukit Panjang Plaza, Woodlands, Sembawang MRT, Yishun MRT, Bishan MRT, Ang Mo Kio MRT, Hougang Ave 8, Sengkang Square, Punggol Central, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

Job Description

• Prepare and submit MSRA prior to the commencement of work
• Liaise with SO team to clear off inspection
• Lead the site supervisor in clearing off site inspection, and to check and ensure that the work is carried out safely as per drawing, and is of good quality
• Coordinate with subcontractor to resolve the issues and to ensure that the work is carried out as per approved MSRA & design, and to meet the schedules
• Check and ensure all the temporary work is carried out as per PE design

Requirements

• Degree in Civil Engineering or equivalent
• Min 2 to 3 Years Relevant Work Experience (C&S RC / building work)
• Proficient in English writing and speaking
• Microsoft application (words, excel, ppt etc)

We are looking for Senior Plant & Machinery (Mechanical / Electrical) Engineers for:

Metal Shredder & non–ferrous separation / Metal Shear Plant

Waste Wood-To-Energy Plant

Responsibilities:

• Responsible for ensuring highest possible production and uptime in the scrap processing or WTE plant.
• Responsible for plant production and reliability / perform root cause investigations to increase reliability and general performance of machinery & equipment.
• Target for incident free and reliable operations, including timely and proper maintenance of systems.
• Responsible for implementing Maintenance Excellence by aligning with Best Practices.
• Ensure that preventive maintenance activities are proactively planned, prepared and scheduled with the required level of equipment reliability.
• Liaison with production team and other stakeholders; manage on-going maintenance activities.
• Ensure plant & machinery documentation and Preventive Maintenance (PM) procedures are constantly updated.
• Ensure technical, environmental and safety aspects in all matters are in compliance with the HSE regulations.

Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree, Engineering (Mechanical/Electrical) or equivalent.
• Required language(s): English & dialect (in order to communicate with dialect-speaking production team and other stakeholders to stay updated on the on-going operations & maintenance activities.)
• At least 2 Year(s) of working experience in the related field is required for this position.
• Required knowledge: hydraulic system, rotating parts, PLC systems, conveyor belts.
• Preferably Executive specialized in Engineering - Mechanical or equivalent.
• Required to work 5.5 days.

Engineer for the product development of door hardware products. (i.e. door closers and floor springs)

An experienced professional responsible for leading and executing entire product development cycles, from new concept design generation, concept and feasibility evaluation, detailed design to prototyping and testing until series production.

Job Responsibilities

• Product development for dormakaba’s surface-mounted and concealed door closers and floor springs.
• Develops and manages new product designs in accordance with project requirements, while adhering to project milestones and schedule.
• Conduct feasibility studies, FMEA, cost analysis and material selection to support design decisions.
• Collaborate closely manufacturers, and suppliers to address technical challenges through DFM & DFA and ensure successful implementation of designs.
• Prepare and present design proposals, progress reports, and project updates to stakeholders, while abiding to timely delivery within project’s budget.
• Utilizes SolidWorks software to generate detailed 3D models and technical drawings for prototypes and production.
• Setup test plans using DOE methodology, analyze test results and iterate design to meet performance and quality standards.
• Participate in team design reviews, providing constructive feedback and contributing to continuous improvement initiatives.
• Collaborate with cross-functional teams, such as manufacturing, quality assurance, and marketing.

Job Requirements

• Bachelor’s Degree in Mechanical/Material Engineering is required.
• Min 3 years’ design experience in a product development environment, contributing to a product’s successful delivery into series production will be preferred.
• Experienced in designing springs, custom gears (e.g. rack and pinion, worm drives), cam drives, bearings and hydraulic systems.
• Skilled in material selection for steel and aluminum, with expertise in manufacturing processes, including machining, cast iron / aluminum casting, metal forming and heat treatment.
• Knowledge in theoretical calculations related to the field of statics, dynamics and kinematics.