JOB DESCRIPTION

· Wireless AP software development and firmware development

· Network communication protocol development

· Embedded system development

· Execution of pre-test for IoT/ Wi-Fi router related certification

JOB REQUIREMENTS

· Bachelor’s Degree or above in Computer Science, Computer Engineering, Electronic, Telecommunication or Networking Engineering

· Familiar with C/C++ and Linux system

· Familiar with networking and embedded system development

· WiFi development experience is an advantage

· Good communication and team working skills

· Good problem solver, ability to think out of the box

· Passion in programming is an advantage

Job Description

• Oversee in-house engineering design works of Fire Protection (Sprinkler, Hose Reel, Fire Hydrant, Dry Riser, etc) and Plumbing and Sanitary system, including detailed design, hydraulic calculation, shop drawings, pipe sizing, equipment selection, etc.
• Manage Fire Protection & Plumbing design coordination with other trades with BIM coordination.
• Liaise with Fire Protection & Plumbing suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for Fire Protection & Plumbing system to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based FP & Plumbing experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in FP & Plumbing calculations including pump sizing, hydraulic calculation, tank sizing and more.
• Experience of design and coordination skill.
• Familiar to fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Senior/Staff Software Engineer, Edge AI - Toolchain

Job Description

We are looking for Senior/Staff Software Engineers to grow our Edge AI & Systems software team to the next level. This team works within the larger ASIC team to architect and enhance Neural Network solutions in the Video Processor roadmap including these current and older products:

• https://www.ovt.com/products/oax8000/
• https://www.ovt.com/products/oax4600/
• https://www.ovt.com/products/oa7100/

This position works in a smaller team that specifies, develops and delivers the toolchain that allows our customers and partners to develop or port AI models to run optimally on our Neural Processing Units.

Responsibilities

• Specify and develop new toolchain features for existing and new NPU architectures, working with the inference engine sub-team
• Enhance, maintain and support existing toolchain features, and modify model network layers for NPU optimality, working with the application engineering teams and sometimes customers/partners.
• Constantly improve productivity through automation in all areas

Skills

• Strong Python class based product development skills based on knowledge of design patterns
• Strong understanding of all aspects of a compiler and related development and debugging technologies, code generation, program analysis, and pipeline optimizations
• Good communication, collaboration, task estimation & reporting, CI/CD via tools such as Confluence, Git, JIRA etc.
• Familiarity with the following is a plus:
• Deep Learning compilers like TVM
• Deep Learning framework - PyTorch
• Eclipse development for toolchain frontend
• CPU/DSP/GPU/NPU architectures

Requirements

1. Ph.D./MS/BS in Computer Science or Computer Engineering
2. At least 5 years of commercial development experience of which at least 3 are in compiler-related areas

Position Overview:

Develop image/video processing algorithms for camera related applications.

Responsibilities:

1. Expand existing solutions to new levels of functionality, quality, and performance.
2. Assist other teams with algorithm implementation, testing and verification
3. Drive the productization of the hardware.
4. Algorithm documentation
5. Collaboration with external researchers.

Requirements:

Key Qualification:

1. BS/MS/PhD in Electrical Engineering, Computer Science or equivalent.
2. Knowledge of image processing algorithm development;
3. Good understanding of digital photography, image quality assessment.
3. Proficiency in C/C++
4. Demonstrate great teamwork, outstanding communication skills, and willingness to learn.

Advantageous:

1. Farmiliar with image and color processing techniques, including HDR, AWB, color correction, noise reduction, IR removal/suppression and CFA demosaicing, etc.
2. Proficinecy in developing, implementing and deploying image processing algorithms for ISPs, or CMOS image sensors
3. Strong mathematics background and track record of independent algorithm research.

Job Description:

• Preparation of construction schedule, monitoring of production and subcontractor's work progress.
• Able to handle with technical method statement.
• Resolving of technical matters and geotechnical issue.
• Submission of progress claims & variation order.
• Cost control measures & wastage control.
• Arrange work progress records.
• Preparation & submission of relevant documents to contractors.
• Able to attend to contractors' queries and comments.
• Attending of site progress meeting.
• Coordinate with Professional Engineer (PE) for PE Endorsement which includes test pile, trench stability, working platform, COS & etc.
• Prepare official letter to Main-contractor to record standby period, EOT claims, variation order, obstruction record
• Summarize diaphragm walls and bored pile panel record.

Requirements:

• Degree in Civil Engineering or relevant studies.
• Working experience in foundation works such as diaphragm walls and bored piles would be an advantage.
• Construction site working environment.
• Fresh Graduate are welcome to apply.

Job Description

Bring more to life.

Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology?

At SCIEX, one of Danaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.

You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn ideas into impact – innovating at the speed of life.

As part of SCIEX, you will help to influence life changing research and outcomes, while accelerating your potential. For more than 50 years, we have been empowering our customers to solve the most impactful analytical challenges in quantitation and characterization through ground-breaking innovation and outstanding reliability and support. You will be part of a winning team, enabled by DBS, that is passionate about helping life science experts around the world get to answers they can trust.

Learn about the Danaher Business System which makes everything possible.

The Senior System Engineer, R&D is responsible for designing, building, and testing complex or large-scale, systems, ensuring that the components of the system are integrated and function. The incumbent determines the overall structure of the system, organizes the interaction between components, and evaluates the influence of the environment.

This position is part of the SCIEX Research and Development organization and will be located in Singapore. We empower our customers to solve the most impactful analytical challenges in quantitation and characterization through ground-breaking innovation and outstanding reliability and support.

In this role, you will have the opportunity to:

• Define system architecture to provide desired functionality in product based on User Needs and regional Regulatory Standards. Thereafter generate the system requirements specification (SRS) based on the architectural decisions and technology choices made.
• Work with engineering disciplines to decompose System/Subsystem Requirements Specifications (SRS/SSRS) and allocate to subsystems. Thereafter, lead/oversee the development of SSRS working jointly with the Subsystem Technical Leads to ensure that the content is developed by the appropriate subject matter experts to achieve performance, functionality and reliability.
• Ensure that SCIEX Systems Engineering Processes are adhered to as per internal documents.
• Perform, lead/or participate in feasibility study, technical design reviews and FMEA in projects where necessary and ensure the mitigations are in place for potential risks. Identify gaps in design proposals, technical capabilities / techniques, and supports the development of strategies to overcome them through DFM & DFS practices.
• Provide technical support and investigation to field escalation and drive design improvements.

The essential requirements of the job include:

• M.Sc. / Bachelor degree in Electrical/Electronic/Mechanical or Systems Engineering.
• Minimum 5 years’ experience in New Product Development environment working with complex integrated systems
• Good knowledge with precision injection and fluidic control, Injections Electrokinetic and / or Electrospray ionization will be an advantage.
• DFSS knowledge and experience is preferred.

Travel Requirements:

• The position requires traveling to company locations and customer sites in US, Canada, Europe, Japan, and China. The successful candidate should be prepared to travel up to 20% of the time.

It would be a plus if you also possess previous experience in:

• Technologies such as electrophoresis sodium dodecyl sulfate (CE-SDS), ribonucleic acid (RNA) analysis and / or glycan characterization analysis.
• Capillary isoelectric focusing (cIEF) and imaged capillary isoelectric focusing (icIEF).

SCIEX, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it’s a health care program or paid time off, our programs contribute to life beyond the job. Check out our benefits at Danaher Benefits Info.

Our Engineers support internal and external manufacturing operations remain operational, continuously improve and innovate. With our extensive range of facilities and environments, our Engineers have opportunities across many diverse areas including Biological, Chemical, Automation, Capital Projects, Maintenance, Safety, Process Development, Technical Services, Utilities and Validation.

WHAT YOU WILL DO

The Process Engineer either independently or with minimal support introduces new products to the site, provides technical expertise on the manufacture of assigned drug products on site and transfers drug products to other facilities. In collaboration with supporting functional groups, the Process Engineer provides technical guidance on deviations, investigations and customer complaints. The Process Engineer also develops and leads/participates in continuous process improvement activities to enhance site performance metrics.

• Leads simple new product introductions to the site by conducting process and equipment comparisons, new raw material introduction, development studies and clinical supplies manufacturing, cleaning processes development and validation and training of technicians as required.
• Designs and executes small/full-scale experiments using design of experiments methodology and/or simulations for new products to evaluate the impact of proposed changes to validated equipment/processes.
• Supports filing activities by developing and leading process qualification activities for equipment, process and material changes.
• Understands the principles of Quality by Design (QbD) and executes the requirements in support of a QbD filing
• Supports routine supply manufacture by providing on going technical support and reviews IPT metrics to identify and implement opportunities for improvement utilizing the lean six sigma tools.
• Proactively monitors the performance of equipment/module(s) or unit operation(s) during manufacturing and cleaning through the use of control charts. Performs statistical analysis of the data and responds to shifts and trends in performance appropriately by engaging various functional areas. The Sr. Engineer, PTO is the change owner for process Global Change Management (GCM) change controls.
• Develops continuous process verification (CPV) plans, analyses the data and authors the CPV reports and annual product reviews. Conducts periodic cleaning assessments as part of continuous process improvement.
• Executes complex equipment/process/automation changes as required for process improvements, including changes to process/cleaning batch sheets.
• Provides technical expertise related to equipment and manufacturing/cleaning processes in response to deviations to understand and eliminate the root cause(s).
• Leads investigations for emergency product complaints, investigations and deviations.
• Provides technical guidance in supports of site and divisional capital projects and new facility start-up activities, including full-scale process demonstration, process validation, and cleaning validation
• Demonstrates and promotes safety, health & environment (SHE) leadership behavior, ensuring that all activities are carried out in accordance with SHE requirements
• Any other duties as assigned by the Supervisor.

WHAT YOU MUST HAVE

To be successful in this role, you will have:

• Bachelor or Masters Degree in a technical field, including Chemical/ Mechanical Engineering, or Pharmaceutical Sciences
• 0 to 3 years of technical experience in manufacturing industry preferred.
• Knowledge of problem-solving tools (such as fishbone analysis, 5 WHY, logic fault tree etc.) and troubleshooting skills
• Knowledge of data analysis (familiarity with use of statistical software such as Minitab or JMP is preferred)
• Good verbal communication skill and technical writing skill
• Attention to detail

This is an Advanced Professional Conversion Program under Workforce Singapore (WSG) and candidates must meet the following criteria and are open to the following conditions:

• Fresh graduates with relevant internship are welcome to apply
• PMETs/Mid-Careerist with no prior work experience in Biopharma industry are welcome to apply

WHAT YOU CAN EXPECT

• Limitless opportunities across various areas in Manufacturing; well-structured career path
• A state-of-the-art facility that delivers solution to its customers world-wide
• Highly engaging team that aims to innovate the future

Responsibilities:

• Assist BD Director in managing program related issues and correspondences
• Coordinate and work with tool and assembly equipment suppliers to ensure smooth program launches
• Design work flows and optimise production layout together with production department to improve machine efficiency
• Source and gather tooling and components quotation from supplier for initial project start up
• Work on new quotation and packaging requirement for new parts requirement
• Support production and quality departments to troubleshoot the processing & quality issues pertaining to plastic parts
• Monitor and track progresses on the program activities
• Provide customer support and response to customer enquiries on time
• Update all tooling activities and bill of materials and project review records
• Follow up and track on engineering changes for each tooling
• Coordinate all mold trials activities
• Design and work with supplier for jig and fixture required for secondary processes
• Prepare periodically tool-life report for customer
• Any other duties as and when assigned

Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Requirements:

• Diploma/ Degree in Mechanical Engineering or equivalent
• 3-5 years relevant experience
• Good knowledge of project management & production process
• Good verbal and written communication in English
• Independent, good initiative and able to multitask in fast paced environment
• Experience in handling Healthcare product is an advantage

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for FP & Plumbing system installation and troubleshooting on site
• Prepare material requisition for all FP & Plumbing equipment and materials
• Prepare work programme for FP & Plumbing works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of FP & Plumbing system, including detailed design, calculation, shop drawings, pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with FP & Plumbing suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for FP & Plumbing system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all FP & Plumbing equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling FP & Plumbing works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in FP & Plumbing design calculations and Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Responsibilities

1. Develop design requirements of an NPU given system level specifications.
2. Being part of modelling the performance of the NPU module and its data transaction throughput.
3. Microarchitecture design and RTL coding using Verilog / System Verilog HDL for various sub-blocks of the NPU.
4. Understanding the mathematics of different convolution operators including different arithmetic formats (fixed point and floating point)
5. Estimate, measure and optimize PPA (Performance / Power / Area) to meet key objectives and results.
6. Optimizing micro-architecture design for low power and area is required.
7. Work closely with verification engineers to ensure comprehensive testing and debug issues.
8. Support integration into the overall system, conducting design checks, and addressing lint/timing/CDC issues.
9. Collaborate with software teams to assist in compiler and toolchain development and their debugging.
10. Produce clear and concise design documentation.

Requirements

1. 8+ years of digital design with at least 2 to 3 years of SoC design experience is preferred.
2. At least one cycle of NPU design completion experience is required.
3. Hands on in digital design experience is a must.
4. Preferably has lead a team of at least 3 to 4 people in the past at the capacity of a design lead.
5. Experience in microarchitecture design, and RTL coding with Verilog/ System-Verilog.
6. Experience in synthesis, with analysis of power, timing and area.
7. Disciplined, quality-minded, and highly driven for excellence.
8. Excellent team player and good communication skills.
9. MSEE/BSEE in Electrical Engineering or Computer Engineering.
10. Understanding of convolution operator and number system is required.
11. Candidates with relevant experiences would be offered as Senior, taking on higher responsibilities.
12. Experience in UVM verification methodology is a plus.
13. A plus to have SoC design experience.
14. Experience with optimizing micro-architectures for low-power and low-area is a plus.
15. Knowledge in deep learning algorithms such as CNN / Transformer is a plus.
16. Experience with past design experience with NPU / GPU / DSP design is a plus.
17. Experience with ARM or RISC-V processor systems is a plus.
18. Passionate and strong in general programming is a plus.

Position Overview:

As design verification engineer, you would be part of a passionate verification team that is constantly pushing the limits – developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification. The goal is simple – to achieve zero-defect with the best and smartest approach to the large verification space.

Requirements:

1. Experience in UVM verification methodology

2. Disciplined, quality-minded, and highly driven for excellence,

3. Excellent team player and good communication skills

4. MSEE/BSEE in Electrical Engineering or Computer Engineering, with 3 years of relevant experience, but are open to fresh graduates with outstanding results

5. Candidates with relevant experiences would be offered as Senior or Staff, taking on higher responsibilities

6. Experience in video processing and video analytics is a plus

7. Passionate and strong in general programming is a plus

Responsibilities:

• Lead line leaders and operators to achieve daily production targets, quality, productivity, and yield.
• Conduct daily pass-down meetings and escalate any line issues.
• Manage manpower, overtime, and consumables planning.
• Ensure adherence to manufacturing and safety procedures.
• Train and coach leaders and operators to enhance performance.
• Implement improvements to minimize human errors.
• Maintain discipline and good housekeeping in the production line.
• Collaborate with departments on projects, evaluations, and preventive maintenance in the fab.

Requirements:

• Diploma and above in Engineering or equivalents.
• Minimum 2 years of working experience in a related industry.
• Experience in high-tech, high-volume manufacturing environment is preferred.
• Strong leadership and communication skills.
• Willing to work 12-hour shifts (permanent day or night, as assigned).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead line leaders and operators to achieve daily production targets, quality, productivity, and yield.
• Conduct daily pass-down meetings and escalate any line issues.
• Manage manpower, overtime, and consumables planning.
• Ensure adherence to manufacturing and safety procedures.
• Train and coach leaders and operators to enhance performance.
• Implement improvements to minimize human errors.
• Maintain discipline and good housekeeping in the production line.
• Collaborate with departments on projects, evaluations, and preventive maintenance in the fab.

Requirements:

• Diploma and above in Engineering or equivalents.
• Minimum 2 years of working experience in a related industry.
• Experience in high-tech, high-volume manufacturing environment is preferred.
• Strong leadership and communication skills.
• Willing to work 12-hour shifts (permanent day or night, as assigned).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

• Manage the development of Unmanned Ground Vehicles (UGVs) by researching and recommending ways to improve their performance, working with technical experts.
• Manage cross-functional team members and coordinate system integration, assembly, testing, and qualification of UGVs
• Conduct and coordinate structured testing of UGVs to validate system and subsystem performance.
• Work with external vendors and internal teams to align design requirements and ensure smooth collaboration.
• Support business development activities by synthesising requirements, defining specifications, plan, drive and track the solution process for the team.
• Ensure that all necessary documentation (designs, system requirements, production details) is organized for manufacturing and production.
• Conduct market research to understand new trends in robotics and unmanned systems technology.

Requirements:

• Degree in Mechatronics, Robotics, Electrical/Electronics, Mechanical Engineering, or similar fields.
• 2-3 years of working experience in project management or product development in fields of robotics or equivalent.
• Experience in systems design, system integration, and team management.
• Good communication and management skills to handle both internal and external stakeholders.
• Ability to handle multiple projects and meet deadlines.
• Knowledge of robotics and unmanned systems.
• Hands-on approach when needed, with the ability to collaborate in a dynamic team environment.
• Experience building and testing robotics/control systems would be advantageous.

Summary

The sales engineer is responsible to generate and increase sales revenues as well as expand client base by seeking and following on leads, first point of technical contact by providing technical assistance and advice to clients, establish and maintain customer relations.

Primary Responsibilities

• Establish new customer market and sell the company’s range of products and services.
• Expand sales to existing client and provide excellent before and after sales services.
• Form good network/contacts with client and industry associations to be constantly connected to various events for networking opportunities.
• Provide customers with proposals which meets their needs.
• Follow up with client enquiries, and contracts.
• Other duties assigned by the management from time to time.

Knowledge and Skill Requirements

• Minimum diploma/degree in mechanical engineering / related discipline or extensive experience in the specialty lubricants industry.
• Independent, discipline, self-motivated and service oriented.
• Strong problem solving and ability to provide solutions skills.
• Strong interpersonal and communications skills.
• Preferably possess own transportation.

The Network Engineer is responsible for managing day to day support of operational tasks, requests, incidents, and changes meeting customer’s requirements and agreed service levels. Perform and support regular preventive maintenance tasks.

The activities include:

• Respond and handling of customer requests/queries
• Incident resolution
• Change and Service Request fulfilment
• Problem ticket closure
• Preventive maintenance tasks fulfilment
• Vulnerability assessment
• to assist the Team Lead/Operations Manager to train and guide junior team members
• Develop and enhance NOC team capability

Make an Impact by

• Analysing, troubleshooting and correcting network problems remotely and on-site
• Responsibility for documenting incident RCA report the configuration of the system and (network) system performance tuning
• Responsibility for security compliance, patching, health check & hardening remediation
• Maintaining and administering perimeter security systems such as firewalls and intrusion detection systems
• Performing standard or project change request as per change window
• Provide on-call 24 x 7 support on a rotating basis
• Responsible for applying operating system updates, patches, and configuration changes
• Perform Preventive Maintenance
• Participate in customer weekly sessions

Skills for Success

• Degree in Computer Science / IT or equivalent
• Minimum 2 years of experience in in Network support and maintenance (LAN/WAN/Cloud)
• Minimum CCNA Certified
• Experienced in network/security administration in enterprise DC and Public Environment
• Experiences in supporting firewall /network product such as Cisco routers & switches, Cisco Firewalls, Cisco ACI, Aruba, Infoblox, Citrix load balancers, Solarwinds etc
• Experienced in troubleshooting system and network problems, diagnose and solve hardware/software issues, analysing system logs and identifying potential issues/incident
• Good to have a valid Singapore class 3 driving license

RF Unit

• Disassemble Signal generator unit and Calibrate the unit according to SOP
• Troubleshooting and repair of PCB assemblies
• Soldering work and board rework on HD, surface-mount PCB assemblies
• Provide necessary fault information and repair records for work carried out
• Knowledge of handling different test and measuring equipment, LCR meter and Oscilloscope
• Complete repair job in a timely manner
• Maintain SOP documents required for daily repair/rework operation

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

COMPANY DESCRIPTION

Care Corner Singapore Ltd was founded in 1981, in a climate of changes in the early 1980s, as economic competition in the region intensified and the rift between the wealthy and the lower-income in particular the Chinese blue-collar workers, widened. Rev Tan Tien Ser and a group of passionate individuals believed that these marginalised people with lower income and little opportunities for a formal education could be helped to realise their potential and become more competent and fulfilled persons. Through a series of early outreach initiatives, Care Corner has evolved into an organisation offering a wide range of programmes and services delivered through various social service centres located island-wide. In a bid to stay relevant to the needs of the community, Care Corner has continuously strived to offer new and innovative programmes to support those in need and the less privileged.

RESPONSIBILITIES

You will be part of the team to provide casework and counselling services for families, with the goal for families to achieve healthy family functioning, and to deliver divorce support programmes and services to families who are affected by divorce, with the goal for families and their children to achieve stability and self-reliance.

Roles and Responsibilities:

Casework & Counselling

• Part of the Intake & Triage Team to conduct intake assessments for new intakesto identify needs, strengths, and risks and make necessary referrals for clients.
• Conduct counselling for individuals, couples and families who are experiencing stress due to marital and family-related issues.
• Conduct case management for clients and case conferences with stakeholders.

Support Programme & Workshops

• Plan, review and facilitate groupwork intervention for parents and children.
• Facilitate premarital and divorce related programmes and workshops to help equip couples and parents with knowledge that enhance relationships and skills to cope with life transitions.
• Facilitate and supervise visitation access of divorcing/ divorced parents with their children and ensuring that the session carries on smoothly and safely for both the parent and children.

Research & Practice

• Contribute to quality practice and professional matters in agency.
• Engage in research to evaluate activities and identify service gaps.
• Facilitate internal training for team/service point

Networking

• Support networking and advocacy sessions with partners and stakeholders

Requirements:

• Master Degree in Counselling or Bachelor Degree in Social Work (preferably with a recognised certification in Counselling)
• 3-5 years of relevant casework / counselling experience in counselling, social work, or related work involving family, parents and children, and have experience in conducting training and workshop
• Preferably accredited member of SASW or clinical member of SAC
• Able to work in multiple sites

Master Degree in Counselling or Bachelor Degree in Social Work (preferably with a recognised certification in Counselling)

Thank you for your application. We regret that only shortlisted candidates will be notified.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

• Support district sales personnel in the handling of Company program service calls on existing products and services and assist in the correction problems as appropriate.
• Participate in design reviews, new application start-ups, and evaluations.
• Assist in critiquing products for serviceability, performance and reliability.
• Inter-act with appropriate company resources and work as a team.
• Ability to assess on-site field problems and operate required testing equipment to return systems to customer conformance.
• Coordinate and manage replacement parts programs with the individual manufacturing plants to ensure the availability of components as needed.
• Assist in the preparation of reports detailing technical problems and solutions to initiate necessary corrective product modifications and/or recommended process changes.
• Document value provided to the customer whenever possible.
• Assist in the development of troubleshooting service guides and bulletins on existing products.
• Assume lead role of maintaining troubleshooting guides/bulletins and distribution to departments when required.
• Qualify, coordinate and monitor outside subcontractor network as required to ensure repair timelines are maintained, and customer satisfaction is maintained.
• Work with other district personnel toward continuous improvement of policies and procedures resulting in increased customer satisfaction.
• Provide installation resource services on a project request basis necessary to satisfy the needs of the customer. Services may include (but not limited to) field surveys, installation checklists, roll-out support services, etc.
• Provide training to the first-line Account Managers on Company offerings and the resources available to them to assist in answering customer questions.
• Seek to keep abreast of the latest industry advances through continuous education

Requirements:

• Technical Degree or equivalent education with industry experience is preferred.
• Must have knowledge of and experience in materials, scheduling, inventory, manufacturing and
• installation processes.
• Excellent organizational, interpersonal, verbal and written communication skills are essential.
• Ability to manage multiple projects simultaneously and maintain project schedule timelines.
• Able to write and maintain clear, concise reports utilizing a standard laptop computer.
• Someone who can think logically and interject common sense and is prepared to make decisions.
• A self-motivated, goal oriented, as well as a team player.
• Required to travel to Jurong Island. Company car is provided.

Job Highlights

• The job will offer you excellent opportunity for promotion.
• Good working environment.
• The Company has a broad market and good prospects for development

Job Description

1. Assist Sales Manager for the sales and marketing for local and overseas market and are required traveling overseas on regular basis to carry out duties.

2. Required to co-operate closely with all other department of the company in order for the contact and/ or project can be executed effectively and efficiently.

3. Assist Sales Manager decision making and overview the company daily operation to ensure the operation run smoothly.

4. Assist Sales Manager to preparing itinerary schedule before traveling to overseas, and contact to the person for arrangement for meeting.

5. Assist Sales Manager to monitor and ensure branch offices run smoothly for everything and keep report to the head quarter in routine basis.

6. Assist Sales Manager to prepare power point, company brochure, project reference etc. for presentation and generate commercial agreement and/ or technical agreement for meeting with clients.

7. Assist in decision making for procurement in searching, purchasing and negotiation of purchase and delivery terms of equipment and materials for production.

8. Able to read GA (general arrangement) to prepare material cost list and generate quotation, Technical specification, tender document etc. and reply to the enquiry of customer require.

9. Visit to the local shipyard frequently for gather more information on new project as well as the exiting project, and at the same time build up a good relationship between shipyard and the company.

10. Assist other Marketing related jobs not mentioned.

Basic Information

• 5 Days : 8am - 5.15pm
• Basic up to $4.5k
• Working location at Joo Koon

Job Responsibilities:

• Ensure projects meet internal and client expectations for quality, budget, delivery timelines, and strategy, complying with Workplace Safety and Health (WSH) standards to avoid Liquidated Damages (LD).
• Monitor project cash flow, ensuring timely submission of progressive payment claims and managing budgets, cash flow projections, and cost variance reporting.
• Review and approve WSH documents (e.g., Risk Assessments, Method Statements, Safe Work Procedures, Fall Prevention Plans, Lifting Plans, Safety Management Systems, Permits to Work).
• Ensure all work is executed safely in compliance with approved safety standards.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified**

Zen Career Pte Ltd | 24C2559
Wong Kaili (Kylie)| R21100484