Job Description

1. Assist the Project Manager with preparation of overall cost and progress reports and other matters related to schedules, cost and materials.

2. Assists the Project Manager and supervise Document Controller to implement systematic document control and filing procedures.

3. Liaise and coordinate with Engineering and Procurement Departments for preparation of monthly progress reports prior to Project Manager’s approval.

4. Coordinate with the Construction department leaders on progress monitoring and recording.

5. Prepare and record change proposals for the contract between Contractor and Client.

6. Assist PM organize tender activities and coordinate in disciplines, vendors for tender preparations

Requirements:

Diploma/Bachelor's degree in any discipline of Engineering

Fresh graduates are welcome to apply

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner.

• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other).

• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications.

• Assess potential risks, materials and costs.

• Provide advice and resolve creatively any emerging problems/deficiencies.

• Oversee and mentor staff and liaise with a variety of stakeholders.

• Handle over the resulting structures and services for use.

• Monitor progress and compile reports in project status.

• Manage budget and purchase equipment/materials.

• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required.

• Working with a team of fellow engineers and construction crews to organize and complete projects.

Job Description:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown

Requirements:

• At least a Bachelor in Chemical Engineering
• Min 1 years of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Team oriented and dynamic

Others:

• Working hours : Mon to Fri (8am to 5pm)
• Company Transport / Transport Allowance if candidate travel to work by him/herself (S$120)

Job Description:

• Monitoring the entire production line with quality issues.
• Work with internal teams to improve the quality of the products
• Familiar with various inspection techniques and able to act as an auditor for quality system

Requirements:

• Require to travel to our malaysia's plant
• Minimum 1 year working experience in manufacturing field
• Previous work experience as a QA Engineer or any similar role
• Minimum Diploma/ Post-secondary/ Polytechnic in engineering or equivalent

• Manage and maintain security protocols, IT systems, networking infrastructures and database systems.
• Troubleshoot technology issues.
• Manage multiple projects simultaneously.
• Work with inter-disciplinary teams to craft IT solutions.
• Communicate complex information to a non-technological audience.
• Assist in researching, designing and implementing new programs.
• Identify and solve problems in existing hardware and software solutions.
• Develop, modify and maintain database.

• Developing detailed designs.
• Doing feasibility assessments and site inspections.
• Preparing and implementing project plans.
• Researching and providing estimates for projects.
• Reviewing government regulations and ordinances.
• Monitoring and optimizing safety procedures, production processes, and regulatory compliance.
• Making recommendations or presenting alternative solutions to problems.
• Confidently liaising with clients and other professional subcontractors.
• Project management duties (e.g. managing budgets, resources, and deadlines; acquiring and compiling quotes, etc.).

Job Description:

• Responsible for developing, implementing, and maintaining Quality Assurance Plan for production of company products.
• Benchmark, develop and implement inspection methods and procedures to meet quality objective.
• Collaborate with cross-functional teams to integrate quality considerations into the entire project lifecycle.
• Participate in product testing during design and development cycle and support in product/process qualification.
• Interpret and analyze mechanical drawings with attention to details.
• Identify, document, and report defects or anomalies, working closely with cross-functional teams to address and resolve issues promptly.
• Facilitate meetings for Material Review Board (MRB) disposition.
• Support in internal and external audits.
• Execute in accordance with the Company’s Quality Management System (QMS) requirements.
• Stay current with industry best practices, tools, equipment testing in system and quality assurance.
• Any other duties as assigned by Supervisor.

Job Requirements:

• Bachelor’s degree in Mechanical Engineering or a related field.
• Effective communication skills, both written and verbal, with the ability to convey complex technical information to diverse stakeholders.
• Ability to work collaboratively in a multidisciplinary team environment.
• Strong interest in quality assurance, project coordination, and the related industry.
• Proactive and detail-oriented mindset with a commitment to maintain high standards of quality.
• Demonstrated leadership abilities in coordinating cross-functional teams to achieve quality objectives.
• Possesses strong time management skills, excels under pressure, and demonstrates the capability to multitask efficiently within demanding timeframes.
• Ability to write technical reports.
• Flexibility and adaptability to take on new challenges and responsibilities.
• Ability to read and interpret mechanical drawings with knowledge of measuring equipment.

Job Responsibilities

• Analyses drawings & determine physical characteristics of products, special handling, requirements and type of packaging and crating required.
• Required to effectively manage multiple projects with minimal assistance & supervision.
• To identify and implement packaging improvement.
• To support on-site packing when required.
• To do any other ad-hoc duties assigned

Job Requirements

• Min. NITEC/Diploma in Engineering or equivalent.
• With some experience or knowledge in packaging/crating work preferred
• Understanding of ASTM international standards.
• Proficient use of AutoCAD software.
• Able to manage multiple projects in a fast-paced environment with strong project management skills.
• 5 day work week
• Singaporeans only

Overall Job Objectives

Assists the PM to oversee the construction activities, progress, planning, implementing, and monitoring of work schedules in accordance with the master and detailed work programme

Core Responsibilities

1. Attend site meetings and inspection

2. Preparation of documentation including project status report, method of statement and work procedure for the project.

3. Planning, executing, monitoring and control of the project.

4. Liaising and coordinating with all parties such as clients, consultants, consultants’ representatives, site supervisors, and sub-contractors

5. Handing of technical and engineering problems

6. Supervise ongoing site activities closely

7. Ensuring that the quality control of the project is met

8. Ensure that all the construction safety rules and regulations are being observed

9. Prepare necessary work and safety permits, submission documents and drawings once work are completed.

10. Any other ad-hoc tasks assigned

Job Specifications

1. Degree in Engineering or related disciplines

2. Able to read/understand/execute work based on construction drawings

3. Good communication, interpersonal and collaboration skills

4. Minimum 3 years of relevant experience.

Beng Hui Marine Electrical Pte Ltd (a subsidiary of BH Global Corporation Ltd) is looking for someone who is motivated and leads by example and is willing to drive sales through proactiveness and hard work. We always believe in rewarding results.

Responsibilities

• Sales Generation: Contribute to the team revenue in all aspects of the sales process, including lead generation, customer inquiries, order processing, and post-sales support.
• Customer Relationship Management: Maintain strong relationships with existing and potential customers by providing prompt and accurate information, addressing queries and concerns, and ensuring customer satisfaction.
• Proposal and Quotation Preparation: Create sales proposals and quotations, ensuring accuracy, and timely delivery to customers.
• Market Research: Conduct research on market trends, competitors, and customer needs to identify potential sales opportunities and develop effective sales strategies.
• Trade Shows and Events: Assist in the planning, coordination, and execution of trade shows, industry events, and customer demonstrations to promote products and services.
• Administrative Tasks: Perform various administrative tasks, including maintaining sales records, preparing sales documentation, managing calendars, and coordinating meetings and appointments.

Requirements

• Diploma or Certifications in Marine / Engineering or relevant fields.
• Candidate with experience in the marine or similar industry is preferred.
• Industry Technical Knowledge: Understanding of the marine or similar industry, including knowledge of similar products, services, market trends, and customer needs.
• Communication Skills: Good verbal and written communication skills, with the ability to effectively interact with customers, colleagues, and stakeholders at all levels.
• Organization and Attention to Detail: Good organizational skills, attention to detail, and the ability to multitask in a fast-paced environment.
• Problem-Solving Abilities: Good analytical and problem-solving skills to identify and address customer issues and sales challenges effectively.
• Team Player: Ability to work collaboratively with cross-functional teams and contribute to a positive and cooperative work environment.
• Adaptability: Flexibility to adapt to changing priorities and handle multiple tasks with tight deadlines.
• Professionalism: Demonstrated professionalism, integrity, and a customer-focused approach in all interactions.

Interested candidates, do send your resume to [email protected]

**Shortlisted candidates will be notified through email for an interview.

Menicon is a contact lens specialist embracing precision craftsmanship to see life in detail. Join our family in Singapore, the first manufacturing facility outside Japan for daily disposable contact lens and a base for developing technologies and products with advanced, value-added features.

Be part of our journey toward digitalization, where you’ll play a key role in advancing automated systems and smart technologies to enhance efficiency. Join a team that leverages innovation to transform manufacturing processes and deliver exceptional quality.

Key Responsibilities:

• Provide control system support, to improve efficiency and reliability of manufacturing equipment and processes.
• Collaborate closely with mechanical, validation, and process engineers to optimize equipment & processes including data analysis for problem resolution.
• Initiate and spearhead software improvement projects on control systems and manage testing, validation and implementation
• Engage in cross-functional team projects aimed at machine and process improvements, embodying teamwork, responsibility, and a capacity for independent work.
• Lead training sessions to enhance the technical skills of operational and technical teams, ensuring smooth transfer and operation of automated equipment.

Minimum Requirements:

• Degree in Engineering or related field.
• 3 years work experience in designing control systems for manufacturing equipment
• Competent in SCADA and PLC programming
• Knowledge in C# will be an added advantage

Job Descriptions:

• To ensure all the maintenance works carried out systematically, efficiently & safely.
• By improving existing preventive maintenance system thus reduce maintenance cost and improve performance of equipment.
• To be the initiator and coordinator of MOC for any addition, modification and replacement in the system.
• To assist the Section Manager and Supervisor to co-ordinate and supervise the day to day activities.
• To troubleshoot Mechanical Equipment / Systems’ problems when it runs abnormally malfunction.
• To work closely with the operation team for daily, weekly and monthly maintenance programmed to maintain all equipment running efficiently, safely and smoothly.
• To train all technician and staffs on equipment maintenance and monitor the 5S and TPM activities carried out in the section.
• To assist the Section Manager to propose and implement action plans to rectify faults occurring in the system/processes.
• To be involved in new project management time to time and be responsible for document preparation and other paper works, as well as co-ordination with contractors & Vendors.
• To manage all Mechanical & electrical Instruments spare parts and tools.

Job Requirements:

• Bachelor Degree in Mechanical Engineering
• Self-motivated, able to work independently and with a team to completion of tasks

Remuneration:

• Working hours - Monday to Friday: 8am to 5pm ,Alternate Saturday: 8am to 5pm
• Company Transport / Transport Allowance $120 if possess own transport
• AWS
• Performance Bonus
• Medical Benefits
• Sign-on Bonus

• Responsible for all on-site technical and engineering matters
• Ensuring works carried out meet company's quality standards &contractual requirements
• Involved in project planning, monitoring project progress and schedule
• To co-ordinate with the client, sub-contractors on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
• Assisting Project Manager in monthly progress claims and monthly progress reports.
• Ensuring supervisors & foremen meets client &regulatory work requirements.
• Ensuring Environmental, Safety and Health practices are carried out at all times.

Job Requirements

• Min 3 years in precast work planning, coordination is a must.
• Degree in Civil or Structural Engineering recognized by Professional Engineers Board Singapore or Building Construction Authority Singapore is a must.
• Min 3-5 years of Civil Engineering Experience
• Required skill(s): Precast will be preferred.
• Proficient in Microsoft Office
• Organised, meticulous with positive work attitude
• Good interpersonal and analytical skills
• BCSS or equivalent
• Able to start work on short notice
• Candidates will also be considered for Project Engineer (Planning- Civil Engineering) position based on education level and working experience.

• Meet Ship Superintend at ongoing vessel at Anchorage or PSA, inspect
• refrigeration, accommodation air-conditioner systems, package type air-
• conditioner, split type air-conditioners.
• Repair the equipment as per customer’s requirement or services or retrofit,upgrade the entire system.
• Supply brand new refrigeration and air-conditioning compressor or re-
• conditioned compressors as per buyer requirement.
• Supply, install package type air-conditioners, split type air-conditioners.
• Supply refrigeration & accommodation air-conditioner compressor parts,
• lubrication oil and refrigerant.

HOYA Technosurgical, is a subsidiary of HOYA Corporation, established in Tokyo, Japan in 2013, which has the origin of PENTAX medical business unit in 1974 arising from the merger of former PENTAX medical business unit & Japan Universal Technologies, Inc. HOYA Technosurgical has set up their first overseas plant in Singapore focusing on manufacturing, research & development and sale of Chromatography Media to pharmaceutical companies.

Job Responsibilities

• Support in the setup of manufacturing facility and process documentation
• Build and train Operators in the operations of machinery and maintenance in compliance with GDP, quality and other relevant company’s standard
• Achieve efficiency, productivity, safety, and quality for assigned processes
• Propose solutions to improve productivity and lead time
• Ensure regular maintenance of machineries to prevent machine down time. Monitoring the efficient, feedback to manager and related department
• Responsible for troubleshooting of daily operations issues
• Investigate and implement preventive actions at source
• Leading of yield/productivity improvement or cost reduction project
• Support Production and Final inspection process validation activity in IQ, OQ and PQ, which the validation of mass-production equipment, with approved development specification and plans
• Other activities as assigned by the supervisor

Education Qualification:

Diploma or Bachelor in Engineering (either industrial engineering, system engineering, mechanical, chemical)

Experience:

0 – 4 years or more experience(s) in chemical or medical devices industry

Functional Competency:

• ISO9001 and 14000
• Relevant working experience in process control and manufacturing operations
• Computer literate, proficient at Microsoft office
• Effective communication in English is essential and Japanese is a plus.
• Able to collaborate well within department to execute project tasks.
• Good analytical skills
• Ability to lead and coach team members

Job Description:

• Prepare, schedule, coordinate and monitor the assigned projects.
• Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications.
• Interact daily with the clients to interpret their needs and requirements and represent them in the field.
• Perform overall quality control of the work (budget, schedule, plans, personnel’s performance) and report regularly on project status.
• Cooperate and communicate effectively with sales managers and other project participants to provide assistance and technical support.
• Review deliverables and initiate appropriate corrective actions.
• Other ad-hoc duties as assigned.

Requirements:

• Min. Diploma in Mechanical/ Electrical/ Electronic Engineering or other relevant.
• 3 years' experience in related project executions.
• Proficiency in Microsoft Office.
• Proactive and responsible.
• Good communication & organizational skills.
• Strong analytical and problem-solving skills.
• Well natured and a constructive team player.

Interested candidates, do send your resume to [email protected]. ONLY shortlisted candidates will be notified through email for an interview.

Job Description & Requirements

To do hydraulic piping job.

To do hydraulic assembly of equipment.

To do hydraulic testing.

To do hydraulic pressure testing.

To do hydraulic oil flushing.

To do hydraulic troubleshooting on hydraulic system.

To do hydraulic pumps service and repair.

To do hydraulic valves service and repair.

To do pressure and oil flow settings.

2. SKILLS

Troubleshooting

Construction

Hardware

Electrical

Piping

Compliance

Pressure

Assembly

Pumps

Electronics

Benefits:

• Working Hours: 8 am-6 pm (6 days)
• 14 days Annual Leave after confirmation
• 14 days Medical Leave (completion of 3 months service)
• $200 medical claim per year
• Performance Bonus (Discretionary)

Job Description:

• Site project management
• Overall project planning, scheduling, monitoring and updating to meet project completion targets
• Daily site activities planning, preparing work breakdown, daily site operation, site coordination, monitoring and reporting work progress
• Other ad-hoc duties as assigned

Requirements:

• Bachelor’s Degree in Civil Engineering / Geology or relevant vocational certificate
• Able to speak and write in English and Chinese in order to communicate effectively with Chinese-speaking clients and associates.
• Knowledge of geotechnical engineering or soil data interpretation or Singapore Geology
• A good team player, self-driven and willing to take responsibility for assigned tasks as project engineer/manager
• Preferably Engineer specialized in Engineering / Civil / Construction / Structural or equivalent
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Job Description

• Perform electrical power system analysis studies including: relay coordination study, fault level study , arc flash study using ETAP software
• Perform design calculations including: cable sizing, voltage drop calculation as per code requirements and local regulations and go through with PE
• Preparation of quotation and follow up to secure purchase orders
• Consult and discuss with relevant authorities for planning and designing of power stations

Requirement

· Bachelor Degree in Electrical Engineering (Preferably NTU or NUS)

· Training on ETAP studies will be provided and fresh graduates are welcomed to apply

· Good interpersonal and communication skill.

· Team player & able to work independently

Transport is provided from 6 MRT pickup points ie Paya Lebar, Serangoon NEX, Bishan, Jurong East, Joon Koon, Woodlands

Mandatory Skills

Requirement:

1. Understanding of protocols like HTTP/HTTPS/FTP/SFTP/AS2 etc
2. Programing experience in Java
3. Familiarity with Linux operating system and commands
4. Capability to troubleshoot integration issues efficiently

• Activity and resource planning for site.
• Organizing and motivating a project team at site.
• Controlling time management for site.
• Cost estimating and developing the budget for site project.
• Ensuring customer satisfaction.
• Analyzing and managing project risk.
• Planning and monitoring progress of the project.
• Managing reports and necessary documentation.
• Designing and applying appropriate project management standards.
• Managing the production of the required deliverables.
• Preparing and maintaining project, stage and exception plans as required.
• Managing project risks, including the development of contingency plans.
• Monitoring overall progress and use of resources, initiating corrective action where necessary.
• Applying change control and configuration management processes for the site project.
• Experinces in Singapore Process Plant Industry.

Responsibilities:

Project Planning & Coordination

• Collaborate with project managers to define project scope, goals, and deliverables.
• Develop detailed project plans, including timelines, budgets, and resource allocation.
• Coordinate with internal teams and external stakeholders to align on project requirements.

Technical Oversight

• Review and interpret technical drawings, specifications and contracts.
• Provide engineering solutions to technical challenges and ensure compliance with industry standards.
• Oversee procurement and ensure materials meet project specifications.

Take-Off and Budget Management

• Prepare accurate Bills of Quantities (BQ) and cost estimates for projects.
• Conduct quantity take-offs from technical drawings and specifications.
• Monitor project costs, manage budgets and implement cost control measures to minimize overruns.

Tendering Assistance

• Support the tendering process by preparing bid documents, reviewing contractor bids, and evaluating technical and financial submissions.
• Assist in drafting and reviewing contracts and agreements.
• Work closely with procurement teams to ensure alignment with project goals and timelines.

Project Execution

• Monitor project progress, ensuring adherence to quality standards, timelines, and budgets.
• Manage changes to the project scope, schedule, and costs through appropriate processes.
• Conduct site visits to oversee construction, installations, or implementations as required.

Communication & Reporting

• Act as the point of contact between clients, contractors, and other stakeholders.
• Prepare and present regular progress reports, technical updates, and cost analyses.
• Address and resolve project-related issues and conflicts.

Risk Management

• Identify potential project risks and develop mitigation plans.
• Ensure safety protocols and compliance with environmental regulations.

Requirements:

• Bachelor’s degree in Engineering (Civil, Mechanical, Electrical, or related field).
• Preferable 3 years experience in project management or engineering roles in oil and gas industry.
• Strong knowledge of engineering principles, budget control, and tendering processes.
• Excellent communication, problem-solving and leadership skills.
• Proficiency in project management software (e.g., MS Project, Primavera), Excel Worksheet, Word Document, Power Point Presentation, AutoCAD, cost estimation tools and BQ preparation software.
• Experience in tender evaluation and contract management.
• Strong organizational and multitasking abilities.
• Wiling to work at project sites and may require extended hours to meet deadlines.
• This role is well-suited for a detail-oriented professional with expertise in project costing, budget management, and tendering who is passionate about engineering project delivery.

• Programming, testing, commissioning, and handover of Electrical Systems (22KV Switch gears & transformers, protection relays, and hipot)
  Prepare and maintain all required commissioning documentation which includes client submission.
• Supervision and Monitoring of defined test procedures start-up sequences, reliability test runs, and performance tests.
• Monitoring of functional and operational tests of various equipment in order to prepare the equipment for the first start-up.
• Manage and supervise a team of experienced commissioning technicians to execute Live equipment testing in a highly professional and safe manner
  Ensure QAQC integration within commissioning processes and procedures
  Witness and provide contractor resources to support FAT as required.
• Preparation of inspection reports, certificates, progress reports, and site correspondence.
• Liaise closely with the client QAQC/Testing teams.
• Generating MSCR's (Maintenance System Change Request) at the project handover stage.
• Ensure that commissioning acceptance criteria is aligned with design specification and client requirements.
• Any other duties required by the Commissioning Manager.

Responsible for tooling drawings, specification filing and maintenance. Manage projects, ensure all tooling are executed smoothly and efficiently against an agreed plan. Perform evaluation and development activities to provide solutions for technical problems to sustain and improved production yield, quality, process cycle-time and cost reduction.

Ability to lead a group of Chinese Toolmakers and Technicians to ensure all molds repairs and maintenance meets all IATF 16949 standards and Customer Specific Requirements, including but not limited improving ensure product quality and manufacturing capabilities, eg Cpk Study.

Job Duties and Responsibilities:

• Supervision, executing and coordinate project activities.
• Ensuring that the project is on-schedule, within budgeted cost, and quality standards.
• Review project plans, specifications, and drawings to ensure accuracy and feasibility.
• Coordinating with Clients and Suppliers to develop project schedules, and resources plans.
• Attending Clients coordination and technical meetings.
• Supervise constructions activities.
• Formulation of Method-Of-Statement, Risk Assessment and Safe Procedure
• Involvement in both internal and external WSH Activities.
• Maintain accurate and comprehensive project documentation, including daily report, inspection records and As-Built drawings.

Job Requirements:

• Minimum Higher NITEC/ Diploma in Engineering or related field.
• Proficient in MS Office applications
• Possess valid Singapore Class 3 driving License
• Good team player with ability to lead and multi task
• Good interpersonal skills and communication skills