Responsibilities:

· Assist the project manager with on and off site meeting pertaining to the technical issues

· Responsible for submission of Architectural samples, shops drawing and other related documents to the consultants or authorities

· Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of project

· Proven problem solving and achievements work progress according to the work schedule

· Site supervision and able to coordinate well with sub-contractors, RE and RTOResponsibilities:

· Assist the project manager with on and off site meeting pertaining to the technical issues

· Responsible for submission of Architectural samples, shops drawing and other related documents to the consultants or authorities

· Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of project

· Proven problem solving and achievements work progress according to the work schedule

· Site supervision and able to coordinate well with sub-contractors, RE and RTO

Requirements:

· Degree in Civil/Structural Engineering (recognized by Singapore PE Board)

· Minimum 5 years’ of precast experience in commercial and condo building projects

We are looking for Electrical Engineers to expand our team.
Candidates with no experience are welcome to apply.

Responsibilities:

• Draw or modify electrical and GA diagrams or write engineering specifications to clarify design details and functional criteria of the equipment with respect to customers' requirement
• Conduct inspection and quality check of electrical equipment
• Conduct installation and troubleshooting of electrical equipment
• Set up and operate test equipment for calibration or configuration of electrical equipment
• Keen mind on quality management, with good documentation, continuous improvement of processes.
• Keen mind on operational planning to ensure good continuous supply of equipment for customers and internal requirement
• Support sales personnel for technical clarifications with customers
• Involve in pre-sales activity of machinery sales, e.g. sizing of generators, studying of tender documents etc.

Requirements:

• Minimum Diploma in Electrical Engineering or any relevant course
• Candidates with no experience are welcome to apply
• Ability to read and amend schematic drawings & circuit drawings
• Experience and knowledge in generators a plus
• Excellent interpersonal and communication skills

Operational Support:

• Assist the Account Manager in coordinating and prioritizing maintenance tasks, addressing issues encountered by the team.

• Support the optimization of manpower, standard time, equipment, and energy usage.

• Provide regular updates on maintenance activities and help resolve operational challenges.

Customer Relationship Management:

• Assist in responding to customer complaints and support customer satisfaction investigations.

• Work with the Account Manager to collect feedback from customers, Dealers/Distributors, and maintain positive relationships.

• Help escalate complex issues to the Account Manager that may impact service quality or business performance.

Financial Support:

• Assist the Account Manager in monitoring financial performance, documenting expenses, and helping to track account receivables.

• Support the management of after-sales service delivery, including the use of Microsoft Business Central for financial tracking.

• Aid in the preparation of financial reports, including service revenue and margin data.

Team Management:

• Provide administrative support in the recruitment, interviewing, and training of technicians as required by workload demands.

• Support the management of a team of technicians by tracking their schedules, workload, and performance metrics.

• Help facilitate communication between technicians, subcontractors, OEMs and the Account Manager to ensure smooth operations.

Logistics and Procurement:

• Assist with parts, materials, and tools procurement for scheduled maintenance, repairs, and emergency service calls.

• Support logistics planning to ensure that the necessary resources are available for maintenance activities.

• Aid in the coordination with subcontractors, from comparing quotations to ensuring timely delivery of services and materials.

Contract and Quotation Support:

• Help in the preparation and management of contract renewals, ensuring that all necessary documentation is in place.

• Assist the Account Manager in generating quotations for simple repairs and service requests.

Health, Safety, and Compliance:

• Help drive Environmental, Health, and Safety (EH&S) initiatives, ensuring compliance during all maintenance operations.

• Support the monitoring of safety standards and participate in creating EH&S awareness within the team.

Performance Metrics:

• Assist in tracking and reporting key performance indicators (KPIs), such as technician productivity, field expenses, and Aftermarket Service Sales revenue.

• Provide regular feedback on operational performance to the Account Manager.

Planning co-ordination with main contractor and sub-contractor

- Arrange and co-ordination for fabrication and installation of steel structural

- Arrange and co-ordination of manpower for fabrication and installation

- Preparation Mathod Statement, risk accessment and safe work procedure

- willing to learn & positive mindset

- Email send to [email protected]

RESPONSIBILITIES
Able to utilize advanced skills to perform complex preventive maintenance and corrective repair of buildings, industrial systems, vehicles, equipment and grounds. Working under limited supervision, monitors building system operations and performance. Utilizes several trade skills such as carpentry, plumbing, electrical, painting, roofing, heating and cooling.Complies with all applicable codes, regulations, governmental agency and Company directives related to building operations and work safety.

ESSENTIAL DUTIES AND RESPONSIBILITIES

Inspects building systems including fire alarms, HVAC, and plumbing to ensure operation of equipment is within design capabilities and achieves environmental conditions prescribed by client.

Oversees and inspects the work performed by outside contractors. Contracted work includes landscaping, snow removal, remodeling, HVAC, plumbers, and cleaning.

Performs assigned repairs, emergency and preventive maintenance. Completes maintenance and repair records as required.

Reviews assigned work orders. Estimates time and materials needed to complete repair. Orders necessary materials and supplies to complete all tasks.

Maintains an energy management program to ensure measures are taken to operate all systems in the most efficient manner to keep operating costs at a minimum.

Maintains the building lighting system, including element and ballast repairs or replacements.

Performs welding, carpentry, furniture assembly and locksmith tasks as needed.

Responds quickly to emergency situations, summoning additional assistance as needed.

Performs other duties as assigned.

· Meet customers and generate enquiries to develop potential spare parts / maintenance contract business, build and develop assigned accounts and relationship, site assessments, etc.

· Hunt for new potential customers, via cold calls, to meet and exceed sales order Intake.

· Promote sales of new pumps / replacements, spare parts (i.e., pump parts and mechanical seals) and maintenance contracts, to new and existing customers.

· Attend promptly to enquiries and understand customers’ needs in order to fulfil their requirements.

· Validate on commercial and technical requirements before generating quotations to customers, with close follow-ups up till quotation status being closed.

· Assist Sales Manager in strategic planning and statics collection for the sales progress.

· Correspond with factories, KSB companies and contractors / dealers for support; in relation with terms of price, technical support / service, and delivery.

· Utilise and update CRM (C4C) database on registered products to installed base and customer visits records.

· Ensure proper handover of purchase order (in terms of technical and commercial with supporting document / costing sheet) to sales admin for order processing.

· Any other ad-hoc duties as per assigned by HOD.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Job Description:

- Proposed CAAS Extension of ATCC

Requirements:

- At least 5 years of supervisory experience in supervision of Civil/Structural works, RC & steel works.

- Experience in supervision of medium to large scale building works, piling works, temporary works, Ground Building Works (GBW) for Government Institutional projects.

- To provide full supervision works to ensure works are carried out in accordance to approved plans under Building Control Act.

- Assist QP to keep and maintain site records.

- Possess Degree in Civil Engineering recognized by PEB and registered with IES as Resident Engineer

- Registered with BCA/IES/ACES as site Resident Engineer

- Job site is at Sealand Road, Changi Area, must be willing to travel and work at that area

- Able to lead a team of site staffs.

Interested applicants to apply to:

[email protected]

Quote: SG510

Submit resume with photo including current and expected salary and contact no. latest by 31 December 2024.

With business expansion, we're looking to hire a Singapore based Service Technical Officer to provide services to our local customers.

For this role, you will need to

■ Commission, calibrate and maintain the performance of the sensors;

■ Provide effective solutions to customers' concerns.

■ Communicate with clients’ engineers and other technicians to ensure that

services are delivered effectively.

■ Promptly following up on service requests and providing customer feedback.

■ Prepare presentations and conduct training to the customers to keep up to date with

the latest developments of the sensors;

■ Write reports and present findings to the Manager after each service visit.

Job requirement

■ Diploma in any field (engineering related major is preferred)

■ At least 2 years of technical service experience within engineering space,

candidates with engineering background are welcome to apply.

■ Team player and independent, good communication skills.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Quality Lab Support Coordinator

6 months contract

About the Company:
Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

Responsibilities:

In this role, you will be responsible for all or subset of the key responsibilities below:

• Receive, archive, retrieve and dispose retention sample, following standard work, approved procedures and regulatory requirements in timely manner.
• Maintain proper 5S and ensure inspection readiness of retention sample rooms.
• Perform assigned tasks within stipulated timeline and escalate discrepancies to Reporting Manager.
• Support laboratory supplies stock check, receiving, stock arrangement and disposal as necessary.
• Any other duties as assigned by reporting manager.

Requirements:

• GCE O Level qualification and above
• Proficient with computer software such as Microsoft Word & Excel
• The role will require the person to be able to move heavy boxes up to 15 KG during process like transfer of samples/stocks checking.
• Customer focus with strong business acumen and continuous improvement mindset.
• Critical thinking mindset with a collaborative and problem-solving attitude.
• Good communication and interpersonal skills.
• Ability to work effectively in a team-based environment.

Reg No: R22104540

EA License no: 94C3609

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

The job incumbent will be responsible for supporting the R&D department in various activities, which include the following:

· Support R&D activities for new membrane product or production process improvement.

· Involve in different project-related R&D activities like wastewater treatment, desalination, drinking water treatment, etc.

· Support and perform experiments for membrane characterization and evaluation.

· Carry out qualification tests and analysis for raw materials and products.

· Maintenance and calibration for some of lab equipment.

· Literature search for product development and relevant area.

· Provide reports and updates for R&D activities.

· Other related duties assigned.

Requirements:

· Diploma/Bachelor's Degree/Post Graduate/Professional Degree in Engineering (Chemical), Chemistry or equivalent

· Familiar with handling practice of chemicals

· Independent in performing experiments

· Good team player, self-driven and meticulous

· Good communication and interpersonal skills

General Description

• Responsible as Operation’s facility engineer for the development of Terminal’s new LNG Trucking facility. Incumbent shall support the Project team, ensure the Operability & Maintainability aspects of the new facility are taken care during engineering, design and construction phases. Incumbent shall also develop and execute “Ready to Operate” plans for the facility;
• Incumbent shall work closely as a team with Production Shift Teams, Maintenance Team and other Process Engineers providing process engineering expertise ensuring the Terminal and Trucking facilities operates safely, reliably and efficiently;
• Incumbent shall liaise closely with Commercial team to ensure the Terminal delivers the required services, inclusive of Jetty Operations, Gas supply and Trucking are incompliance to regulations, procedures and contractual agreements

Roles & Responsibilities

The incumbent roles include but not limited to following scope of tasks and duties:

• Evaluate operations activities, make recommendations and execute continuous process improvements in the areas of operational excellence;
• Recruit, train and supervise the Trucking Technicians assigned for operating the Trucking Facility.
• Lead troubleshooting, inspections, reviews and investigations of equipment or process system to support optimisation, drive root cause analysis and formulate remedial resolution. Incumbent shall also investigate Customer’s complaints related to equipment and process systems;
• Review the adequacy of standard operating procedures(SOP) to ensure safe and reliable operations with operational design limitations, includes commissioning, operations and maintenance phases of facilities;
• Provide specific instructions to Production Shift Teams, Maintenance Team, Trucking Team and Laboratory on LNG transfer operations, trucking, stowage plans and samplings requirements;
• Liaise with stakeholders in ensuring LNG surveyor’s reports, certificates of quality are accurate and consistent as per the procedures;
• Diligently review maintenance plans, method statements and risk assessment on the process safety aspects for the maintenance work related to the assigned equipment and systems;
• Compile data and measure Terminal’s performance including service availability and efficiency;
• Undertake alarm management for assigned area and proactively drive alarms analysis to ensure robust operations;
• Take lead role for Management of Change(MOC) for facilities modification, as required;
• Participate in reviews and evaluations such as HAZID, HAZOP, FMEA, SPF, 3D models, Safety Integrity Level, RAM analysis, design layout and process safety requirement in alignment with regulatory and business objectives;
• Report HSSE near miss/violation. Take an active role in HSSE activities and green initiatives;
• Assigned specific role and responsibility in emergency response;

Work Experience

• Minimum of eight (8) years work experience in process engineering function in an oil, gas and petrochemical facilities, complex utility, cryogenic or trucking facilities;
• Conversant with local/international codes, regulations, standards, best practices, equipment inspection and schedule requirements;
• Knowledge of installation, commissioning, start-up, maintenance and troubleshooting of processes system in oil, gas or petrochemical industry;
• Knowledge of Process Safety Management, Electrical, Instrumentation, Controls or Mechanical systems;
• Experience in Process Simulation (e.g. Hysys/Unisim or equivalent), Design Softwares(e.g. Fisher Specification Manager, Hydraulics, PSV sizing) or other related process software an advantage;
• Experience in Engineering design analysis including preliminary design development, heat and mass balance calculation, technology evaluation and equipment selection preferred;
• Experience in dealing with consultants and contractors involved in the Oil & Gas sector, including external agencies, utilities and government organizations;
• Basic knowledge of ship-shore interface and cryogenic transfer operations an advantage;
• Capable of lead and guide technicians ensuring the works are executed safely and effectively;

Education

• Incumbent must possess a Degree in Chemical Engineering from a recognised university.
• Process Engineering background with Mechanical and Instruments knowledge.

COMPANY DESCRIPTION

Founded in Norway in 1996, REC Group is an international pioneering solar energy company with a strong footprint in North America, Europe and Asia. We are part of Reliance Industries Limited (RIL), a Fortune Global 500 company that shares our passion for bold innovations that empower people with clean energy solutions and drive global energy transitions. A trusted partner for customers, consumers and employees, we are “Solar’s most trusted”!

RESPONSIBILITIES

Be the key driver to ensure that REC Modules deliver world class leading top quality product through well controlled process and manufacturing flow, from material supplies to product deliveries.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Be key driver to ensure improvement, qualification and implementation of new processes/products including changes and/or new product introduction, are in-line with the overall production performance enhancement targets.
• Support production line issues with appropriate and permanent corrective solution, as and when necessary.
• In plant expansion phase, work closely with process/equipment/technology and contribute to establish good product quality and specification.
• Support investment proposals and projects in order to utilize best available practice and competence.
• Support managements’ directives and projects as and when needed.
• Possessed very good ability in project management, providing key milestone, timeline and execution, overseeing the completion of project on time.

Module PD Engineer

• Candidate working in Module PD is responsible for development of the bill of materials (BOM) used in the PV module.
• Responsible for redesign of parts for cost and process improvement through alternative components, parts reduction, jigs and fixtures, and increasing yield, reducing cycle time and improving quality
• Excellent knowledge in material structure performance and provide direction of how best the appropriate materials could be introduced and change to meet the overall cost targets.

Knowledgeable in establishing, sourcing and developments of new materials, new designs and alternative vendors (such as Glass, EVA, Back Sheet, Frame, junction box, etc.) to meet the overall process, production and cost improvement targets.

• Degree in engineering disciplines (electrical, mechanical, mechatronics, material science or related discipline )
• 3 years or more experience for engineer position
• 7 years or more experience for senior engineer position
• Knowledge in product design environment.
• Knowledge of interpreting design intent for DFM and DFA
• Strong knowledge of semiconductor or Solar.
• Knowledge in Prototype PV Module design functionalities that ensure good quality and manufacturability would be an advantage
• Knowledge of product functionality of PV modules/panels would be an advantage
• Good presentation and communication skills
• Must be able to work independently and knowledgeable in project management
• Supportive in other job functions assign by superior

Nanyang Technological University’s National Centre for Research in Digital Trust (DTC) is a Trust Technology Research Centre to execute a national program to help put Singapore into a strong trust hub. The key objective is to support efforts to create a trusted digital environment for people and businesses in the digital transformation by providing businesses and consumers with greater assurance and confidence as they digitalize. For more details, please view https://www.ntu.edu.sg/dtc

We are looking for a Research Engineer to develop, implement, and oversee techniques and systems in Trust Technology and related areas such as privacy, security and blockchain, which are important components of digital trust platforms. The role will focus on emerging technologies that engenders trust and espouse the values of fairness, safety, and privacy in digital technologies.

Key Responsibilities:

• Conduct research into trust technologies testing – translating algorithms, tools, and frameworks into working prototypes that can explain how research outputs can be productised into new capabilities.
• Work closely with Centre’s researchers to design and develop system implementation work from research into the product.
• Design and build working tools that can support the technology transfer of new capabilities to research partners and can be used to showcase the value of a given research outcome.
• Write and maintain technical documentation, presentations, and papers on research into trust technologies testing, helping to educate and raise the overall competency in emerging areas of trust technologies.
• Engage global partners and researchers to understand latest trends and advance Singapore’s mindshare in this domain.

Job Requirements:

• Master’s degree in computer science/ engineering or related fields.
• Proficiency in Python is essential; experience with Java, C/C++, Go, and PyTorch/TensorFlow is a plus. Proficient with Linux (e.g., Ubuntu, CentOS) and shell scripting.
• Experience in developing and deploying machine learning models, especially in NLP and LLMs, covering tasks like data preprocessing, feature extraction, training, and evaluation.
• Strong knowledge of machine learning and deep learning techniques (e.g., knowledge graphs, machine unlearning, AI testing). Cloud platforms (AWS, GCP, Azure) and containerization (Docker, Kubernetes) experience required.
• Familiarity with Git and collaborative development tools with experience in end-to-end ML system development (data exploration, feature engineering, model training/evaluation) is advantageous.
• Solid understanding of software engineering principles and best practices and the ability to explain complex technical concepts to both technical and non-technical audiences.
• Strong analytical, problem-solving, and innovative thinking skills and a good understanding of ethical AI practices, especially related to data privacy and security.
• Self-motivated, able to work independently in a fast-paced environment with strong collaboration skills. Experience working in cross-functional teams with attention to detail and commitment to delivering high-quality results.
• Experience in research on mechanistic interpretability.
• Experience in the implementation of multi-modal LLMs or vision-language models.

We regret to inform that only shortlisted candidates will be notified.

Job Summary:

Seeking a Sales Manager / Engineer with a civil engineering background and sales experience in construction or building materials. This role involves liaising with consultants, professional engineers, architects, and façade contractors to drive sales and deliver presentations.

Job Responsibilities:

• Develop and execute sales strategies.
• Build relationships with industry professionals.
• Coordinate with the technical team to present aluminum and glass, façade and curtain wall solutions.
• Coordinate with project teams and provide regular sales updates.
• Follow up on claims and payments from clients to ensure timely processing.

Job Requirements:

• Degree in Civil Engineering
• Sales experience in construction / building materials
• Knowledge of façades, curtain walls, and glazing systems is an advantage
• Strong communication and presentation skills

Responsibilities:

· Create, control and distribute QA related documents

· Register, track and maintain records of all incoming/outgoing drawings, documents from clients/suppliers

· Project documents/drawing submission thru Aconex

· Plan, implement and organize ISO 9001, 14001, 18001 & Bizsafe audit (Internal & External)

· Maintain proper documentation in accordance to IMS requirements

Requirements:

· Possess Diploma/Degree in Civil Engineering

· Preference with/without experience

· Proficient in MS Office

· Preference will be given to those who with experience

JOB DESCRIPTION

· Design and program automated test scenarios according to test plan with its acceptance criteria

· Manage and maintain end to end automated test framework such as prepare test environment, test data, update functional testing scripts in accordance with changing requirements

· Work with QC project leader to identify, propose, prioritize and implement test automations.

· Work with test engineers to troubleshoot observed issue, determine root cause and identify solutions

· Contribute towards continuous improvement of testing practices/tools to improve test strategy and efficiency

· Help to ensure every release happens in a timely manner with a high level of quality.

JOB REQUIREMENTS

· Bachelor’s/ Master’s degree in Computer Science, Software Engineering or other equivalent degree/experience

· Strong python scripting skill and C++ programming background

· Good written and verbal communication skills in Chinese ( Required to liaise with Tawiwan colleagues)

· Able to work well both independently as well as in a team

Position Overview:

You would be part of a dynamic digital SoC design team that develops state-of-the-art video processing, neural processing, advanced video analytics accelerators, and the entire Camera Processor SoC. You would be joining the team to explore, evaluate and define innovative design SoC architectures, to meet or exceed the technical requirements of the SoC. You would be responsible for the successful implementation of the designs in Verilog/SystemVerilog coding, metrics measurement to meet key objectives & results, and follow-through in comprehensive verifications to successful silicon.

Requirements:

1. Experience in SoC architecture and design, and RTL coding with Verilog/SystemVerilog

2. Experience in ARM, RISC processor system

3. Experience in embedded C and assembly code programming

4. Experience in analysis of power, timing and area

5. Experience in at least one of scripting languages (e.g. Perl, Python, TCL, or Bash)

6. Disciplined, quality-minded, and highly driven for excellence

7. Excellent team player and good communication skills

8. MSEE/BSEE in Electrical Engineering or Computer Engineering

9. Candidates with relevant experiences would be offered as Staff, taking on higher responsibilities

10. Experience in always-on system, automotive system, secured system, bus interconnect, neural processing, video processing and video analytics is a plus

11. Experience in system modelling and simulation using emulator and SystemC is a plus

12. Passionate and strong in general programming is a plus

MacGregor shapes the offshore and marine industries by offering world-leading engineering solutions and services with a strong portfolio of MacGregor, Hatlapa, Porsgrunn, Pusnes and Triplex brands. Shipbuilders, owners and operators are able to optimise the lifetime profitability, safety, reliability and environmental sustainability of their operations by working in close cooperation with us.

Purpose of the position

As a Service Engineer with expertise in steel work, you will be responsible for supervising the structural steel repairs, including welding, fabrication, and modifications on Roll-on/Roll-off (RoRo) vessels and hatch covers on container vessels and bulk carriers. You will ensure that all steelwork adheres to industry standards and vessel safety regulations, while leading a team of engineers and subcontractors.

This role requires in-depth knowledge of steel structures and the

capability to manage projects efficiently and safely, ensuring high-quality service for MacGregor and third-party products when necessary

Main tasks and responsibilities

• Steel Work Supervision: Supervise structural steel repairs, including welding, fabrication, and modifications on RoRo vessels, container vessels, and bulk carriers, ensuring compliance with industry and safety standards.
• Maintenance: Perform preventative maintenance, corrective actions, and upgrades on MacGregor equipment, including RoRo ramps, doors, and hatches.
• Inspections: Conduct thorough inspections of steel structures and mechanical systems to ensure compliance with safety and quality standards.
• Project Management: Lead and manage subcontractors during larger steel repair projects, ensuring the work is completed on time and within budget.
• Customer Support: Establish and maintain excellent relationships with internal and external customers, providing technical support and feedback to the relevant teams.
• Safety Compliance: Adhere to all Quality, Health, Safety,and Environmental (QHSE) standards and site-specific safety protocols.

What you’ll need to succeed

Education:

• Diploma in Marine Engineering or an equivalent technical qualification in mechanical, marine, or steel fabrication fields.
• Engineering graduates are encouraged to apply.

Experience:

• Minimum of 5 years’ experience in supervising steelwork, particularly with RoRo/Hatch Cover systems or in marine environments.
• Strong background in mechanical, hydraulic, and steel structures is essential.
• Experience working in ports,onboard ships, and offshore environments is preferred

Skills & Competencies:

• Proficient in welding and steel fabrication techniques, with supervisory
• experience.
• Strong problem-solving abilities and the capability to lead teams and manage projects independently.
• Fluent in English; multilingual skills are an asset.
• Ability to perform under pressure and adapt to changing circumstances.

You will be part of

We offer you an opportunity to put your skills and experience into work and make an impact in our global organisation and the marine industry. You will work together with great colleagues from various backgrounds inspired by shared, ambitious goals. We value collaboration in our open and inclusive culture. With us, you will have the opportunity to develop yourself professionally. Join us to make a difference - and have fun while doing it.

Do you want to be part of the team that revolutionizes the resource exploration and navigation industry? Atomionics is working on quantum sensors based on cold atom interferometry where atoms are cooled down to almost absolute zero using lasers. At such cold temperatures, these atoms start behaving like waves, which allows us to precisely measure the forces acting on them.

This opens up a wide range of applications including, but not limited to, paving a path in the energy transition to zero-carbon, exponentially improving the performance of inertial navigation systems, and transforming the global positioning system. At Atomionics, you will get the chance to prototype, test, refine, finalize, and produce your designs toward making our devices compact and robust for field deployment with the only constraints being power and your imagination.

We are looking for an electronics engineer who:

1. Wants the freedom to innovate by being involved in deep tech research
2. Is excited by the prospect of working within an interdisciplinary team comprised of mechanical engineers, physicists, and software engineers
3. Would like to own their work via compelling equity offerings

We are a small, focused group in a high-energy environment. Our team consists of people at the top of their domains with a diverse set of experience, such as in advanced rocket engines, the first digital cameras, and high-resolution microscopes, apart from cold atom physics. In addition, we are backed by some fantastic investors from the private and public sectors, such as Wavemaker, SGInnovate, Cap Vista, 500 Startups, and other prominent angels.

Responsibilities

• Lead project development from hardware specifications, manufacturing methods and procedures, and manufacturing quality
• Design architecture to manage size, weight, and power of cold atom sensors to target specifications
• Propose new innovative solutions and technology

Must have skills

• Analog and digital design
• Microcontroller/microprocessor and FPGA based design, interface SPI, I2C, RS232, Parallel, USB, CAN, and SATA
• Schematic capture and PCB design layout
• Prototyping and debugging of boards
• Strong interest in and passion for technology

Nice to have skills

• Knowledgeable in RF test methodologies of RF modules and the use of RF test equipment
• Knowledgeable in solid-state and fiber-based lasers
• Knowledgeable in high power switching power supply and battery management
• Leads and owns projects
• Expertise in emerging technologies

Brief Summary

• Basic $8000 + AWS + VB + Medical benefits
• 5 Days : 8.30am-5.30pm
• Working Location @ West
• AL 14 Days, Birthday Leave, Annual health check-up, Customized Gift for holiday season
• Oversea training in Shanghai

Responsibilities

• Defining test plans, analyzing device performance, and contributing to the development of next-generation products.
• Define design verification test plans, analyze device performance, and provide feedback for design improvements.
• Perform detailed characterization of active and passive integrated photonic devices at the chip-level and wafer-level.
• Develop software for data post-processing.
• Participate in R&D projects for the development of next-generation products.
• Hands-on experience in characterizing active and passive integrated photonic devices, including various optical-optical (OO), electro-optical (EO), and optoelectronic (OE) measurements at DC and AC levels.
• Expertise in optical alignment and electrical probing procedures.
• Experience in test setup development, maintenance, and equipment resourcing.

Requirements:

• Min 5 year relevant experience
• Proficiency in handling mechanical, electronic, or automated equipment.
• Singaporean only

For consideration, kindly submit your CV by clicking “APPLY Now” or email to [email protected]

**Only shortlisted candidate would be notified**


EA Reg. No: R1988238 | Erlynn Tay Kim Geok

JOB HIGHLIGHTS

· Cutting Edge Internet-of-Things and AI Technologies

· Open Source and Maker Culture

· Friendly Working Environment

JOB DESCRIPTION

· Realtek is one of the leading fabless semiconductor design companies in the world, with this position, you will get to play a role in value-add to the latest Realtek wireless communication IC product line.

· You will develop software and firmware for the state-of-the-art Internet-of-Things microcontrollers, writing tools, automation, and build systems.

· You will also work closely with the hardware, driver, test, and marketing team to be exposed to the entire product designing cycle.

· You will have the chance to prototype your ideas and make them public through social media, workshops, and events.

· You will be able to follow the latest tech trend and learn new skills when working with cutting-edge technologies.

ROLES & RESPONSIBILITIES

· Be a part of a team that maintains, implements, and validates embedded software for Realtek's latest IoT SoCs

· Design application-level middleware to simplify the customer development process

· Port new features, capabilities, and platforms to Realtek IoT SoCs

· Prototype innovative IoT applications using various network protocols, tools, and open source software

· Debug and fix peripheral, wireless connectivity(Bluetooth, Wi-Fi, etc.), and network-level issues

· Collaborate with third parties for hardware and software projects (ARM, SeeedStudio, Sparkfun, Adafruit, AI-Thinker...)

· Online & offline event organization with groups, institutes, and local universities

· Content creation and social media marketing strategy based on Realtek IoT solutions

· Community management and customer support

JOB REQUIREMENTS

· Bachelor’s degree or above in Computer Engineering, Electrical Engineering, or other related majors

· Fresh graduates are welcome to apply

· Experience with C/C++ and a scripting language(Python/Bash/etc.) is a must

· Experience with embedded system drivers, peripherals, computer networks, wireless connectivities, and open source development platforms (Arduino, PlatformIO, etc.)

· Experience with TinyML and/or AIoT-related development is a bonus

· Experience with video editing and content creation

· Willingness to learn new technologies and ability to follow the latest software and electronics trend

· Good Communication and Teamwork Skills