Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for ACMV system installation and troubleshooting on site
• Prepare material requisition for all ACMV equipment and materials
• Prepare work programme for ACMV works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with ACMV suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for ACMV system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling ACMV works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team.

Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Responsibilities:

• Lead the protocol generation and review for the assigned areas (i.e. process equipment, facilities, utilities and laboratory equipment)
• Review vendor or construction turnover document
• Review construction walkdowns to assure compliance with design
• Lead or direct execution of full C&Q project lifecycle, including URS, Design Verification, FAT, SAT, DQ, IQ, OQ and PQ etc.
• Trouble shooting equipment with a cross functional team
• Manage summary report writing wherever required
• Verification of Construction Contractor’s Document deliverables (CTODs) and Vendor Document deliverables (VTODs)
• Support the review and revision of design document, wherever required
• Liaise with identified stake holders, including suppliers/contractors
• Provide SME input wherever required
• Manage the assigned system handover
• Support the management of project schedule
• Compliant to quality and safety requirements
• Complete trainings in a timely manner
• Support company operation and business as required
• Any other project responsibilities specified in the individual OAN and organizational responsibilities assigned by management

Requirements:

• Minimally a Bachelor of Science/ Bachelor of Engineering or related scientific degree
• At least 7 years of experience in Pharmaceutical industry
• In-depth technical knowledge in the assigned area and associated regulatory requirements, guidelines, and other industry best practices
• Ability to work in a fast paced / dynamic work environment
• A fast learner with “Can-do” attitude
• Good time management skill and great attention to detail
• Proficient presentation and facilitation skill is a plus

You're a Software Engineer with excellent technical, communication, and organizational skills, combined with deep software knowledge on C#, C++ and VB.

Responsibilities

• Software development for Industrial Automation Machines using C# Visual Basic, C++

• Liaise with customers on machine specification.

• Evaluate and implement other possible system for machine programming.

• Test and troubleshoot machines.

• Conduct machine training.

Requirements

• Degree/ Diploma in Electrical Engineering/ Computer Science.

• Developing software for Windows-based applications.

• Experience in designing Automated machine is an added advantage.

• Proficiency in C# language.

• Knowledge of C++ and Visual Basic language.

• Ability to work under tight deadlines and self-motivated.

• Problem solving/ troubleshooting skills.

• Initiative and able to work independently.

• Good coordination/ communication/ presentation skills.

• Good command of English.

Task and Responsibilities

• Read and understand technical specifications, prepare job-list, work schedule, plan material take off and manpower planning of yard men and contractor for each given jobs. Report department head and update any special materials for specific project (if require more lead time or needs to purchase from overseas)
• Advance planning man and materials, including all facilities.
• Generate, Control and monitor department budgets.
• Order the material required as per material take off and co-ordinate with purchase department for timely delivery of the materials
• Cooperate with project manager on appropriate procedures and schedule to complete the job.
• Ensure safety, discipline and welfare for all subordinates.
• Carry out trade work as per specifications and to the satisfaction of the owner/class & timely completion. Ensure good quality work as per work instructions. Ensure all trade work mark-up drawings to be made and approved by owner’s representative
• Maintain good housekeeping and Safety at all times on board vessel & workshop. Ensure all workers follow safe work procedures at all times
• Responsible for minimum wastage of materials and balance material to be accounted and returned to store at the end of the project.
• Prepare, setup and review department documents (RA, SOP, Internal & External auditing, OR) with supervisor and manager
• Lead group of supervisors, fitters and sub-contractors.
• Ensuring optimum work processes and equipment utilization.
• Understand all jobs given supervise and give detail instructions to subordinates and contractors report to department engineer or department head.
• Ensure all work completion reports will be done by Ship in-charge, verify & submit to owner Rep to get sign before handing over to commercial department on time (before vessel delivery)
• Monitoring vessel daily job deployment report to achieve target on time.
• Perform other related jobs as assigned by DH.
• Ensure Permit to work system is followed strictly.
• Identify parts and components needed for repairs or replacement and to liaise with regional vendors for replacement of critical spares for vessels.

Job Requirements

3 years and above of relevant experience in ship building & Ship repair industry.

• Possesses in depth knowledge on Marine Machinery Works.
• Able to speak and write in proper English.
• Self-initiative and motivated individual.
• Possesses quality leadership skills to lead and supervise people under their charge.
• Able to give constructing advice based on their qualified experiences.

We are looking for an innovative Civil Engineer to design, develop and construct a huge range of projects of the physically and naturally built environment from conception through to completion. You will have a say in how the world looks like, work in a fast growing dynamic industry, contribute towards healthy economies and make a lasting positive impact to society.

• Lead the team in executing electrical work during the construction phase, including cable tray installation, cable pulling, panel installation, cable termination, and testing/commissioning for MV/LV switchgear, transformers, UPS, DCIS/HMI, etc.
• Monitor and inspect construction activities to ensure compliance with design documents.
• Manage a team comprising supervisors, sub-contractors, and vendors.
• Responsible for electrical interfaces with the operational team, conducting meetings, and providing technical clarifications.
• Investigate and troubleshoot electrical switchgear faults or failures, implementing effective corrective and preventive actions.
• Analyze and enhance equipment reliability to prevent recurrence, collaborating with operation groups and external contractors.
• Prepare documentation for maintenance work, ensuring compliance with safety standards, and utilizing appropriate Method Statements and Risk Assessments, meeting BCA requirements.
• Collaborate cross-functionally to ensure systems, equipment, and rooms align with internal customers' needs.
• Review inspection and testing plans for electrical and instrument system installations through relevant checklists.
• Coordinate with stakeholders to ensure the smooth completion of projects.

• Programming, testing, commissioning, and handover of Electrical Systems (22KV Switch gears & transformers, protection relays, and hipot)
  Prepare and maintain all required commissioning documentation which includes client submission.
• Supervision and Monitoring of defined test procedures start-up sequences, reliability test runs, and performance tests.
• Monitoring of functional and operational tests of various equipment to prepare the equipment for the first start-up.
• Manage and supervise a team of experienced commissioning technicians to execute Live equipment testing in a highly professional and safe manner
  Ensure QAQC integration within commissioning processes and procedures.
• Witness and provide contractor resources to support FAT as required.
  Preparation of inspection reports, certificates, progress reports, and site correspondence.
• Liaise closely with the client QAQC/Testing teams.
• Generating MSCR's (Maintenance System Change Request) at the project handover stage.
• Ensure that commissioning acceptance criteria is aligned with design specification and client requirements.
• Any other duties required by the Commissioning Manager.

• Conduct onsite inspections and troubleshooting at client premises.
• Provide hands-on preventive maintenance, repair, and equipment installation.
• Adhere to company field processes and protocols.
• Carry out mechanical/electrical device system upgrades.
• Collaborate with engineers on project management, equipment installation, and maintenance services.

Job Description

• Develop detailed designs, layouts, and specifications for piping systems, ensure proper pipe support design based on piping loads, thermal expansion, and seismic considerations.
• Identify appropriate materials, ensure material compliance with project specifications, applicable codes, and standards such as ASME, ANSI, and local regulations.
• Work closely with process, mechanical, civil, and electrical teams to ensure piping systems are integrated seamlessly with other systems
• Coordinate with procurement, construction, and commissioning teams to ensure timely delivery and installation of piping systems
• Prepare piping-related project deliverables including technical drawings, specifications, data sheets, and material take-offs
• Liaise with suppliers for quotation and technical evaluation of quotation. Review and approve piping construction drawings, isometrics, and support drawings
• Lead piping design reviews, coordination meetings, and vendor technical discussions
• Manage piping engineering scope, schedule, and budget, ensuring project milestones are met

Requirements

• Degree in Mechanical / Piping Engineering
• For degree holder, minimum 5 years of experience in piping design and engineering. For Diploma holder, minimum 8 years of experience is required.
• For senior position, candidate must have at least 10 years of experience, including leadership or project management experience.
• Strong expertise in piping materials, piping arrangement, stress analysis, and design of piping systems
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Knowledge of international and local standards (e.g., ASME, ANSI, BS EN, PUB Singapore guidelines)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping engineering software, and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Job Description

• Prepare and review the design of the Mechanical Works, such as piping & equipment drawings, calculation and data sheets
• Involve in daily coordination with internal C&S and BIM team to resolve all the clashes, penetration etc
• Develop the work schedule and coordination of the project works to ensure project is on schedule
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of mechanical works
• Handle and resolve all site technical relating matters
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met
• Prepare all relevant checklist for Installation and Testing & Commissioning Works
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules
• Collaborate with internal stakeholders, clients, consultants, vendors and contractors
• Attend to clients’ comments and ensure clients’ approval & acceptance to all Mechanical Works related design, installation and Testing & Commissioning Works

Requirements

• Min degree in Mechanical Engineering
• 5 to 8 years of relevant experience in the construction industry. Working experience in water or wastewater industry will be an advantage
• Familiar with Auto CAD, Mechanical, Structure drawings and Microsoft Office
• Experience in design, installation, testing and commissioning of the mechanical works e.g. pipings, pumps etc
• Experience in Project Execution, Project Coordination, Supervising and Coordination with sub-contractors, consultant, and Client
• Good technical knowledge in understanding the Mechanical System
• Well versed in BIM software i.e. Bentley and Navisworks
• Team player with good interpersonal skills
• Meticulous and analytical with excellent problem-solving skills
• Highly motivated and able to work independently with minimal supervision

The Mechanical Engineer is responsible for the engineering and delivery of mechanical and structural aspects of construction under direction from the Construction Manager. Their activities will involve coordinating design and construction efforts, resolving on site engineering issues and planning and tracking productivity targets.

Key responsibilities and accountabilities

Technical

• Design, integration & coordination, installation & commissioning of mechanical systems and services required for the project
• Liaise with Construction/Installation Manager to ensure job is on schedule on Site.
• Liaise with Client on all technical aspects of the project.
• Provides engineering advice for the Construction/Installation Team.
• Attends meetings with client on all disciplines of the work (i.e. 1 etc.) as required.
• Prepares with the Quality Manager all Inspection and Test Plans and associated Project Specific Procedures.
• Ensures that the quality requirements of the client are adhered to and that company procedures are followed.
• Coordination & integration of the design with other engineering design disciplines & services
• Ensure project timetabling requirements are met
• Development / production of inspection & test and operating & maintenance manual documentation.
• Ensure local regulatory and OHS requirements are maintained
• Ensure that the surveys of installations throughout the project are conducted in a professional manner with all results being reviewed and accepted by UGL. All actions resulting from these surveys are coordinated by the Engineer until completion.
• Provides written reports on engineering activities as required by the Project Manager.
• Mentor Engineering Graduates and Engineering Vacation Students (Engineering Assistant)
• Maintain documentation and registers
• Provide monthly reporting data to the Engineering Manager as required

Safety

• Undertake all responsibilities in a safe manner.
• Ensure a safe working condition is present for all employees, contractors and visitors.
• Participate in daily pre-start meetings.
• Use appropriate personal protective equipment and safety systems such as job safety analysis, pre-work checklists and risk assessments.
• Comply and have input into safe working procedures.
• Report hazards, incidents and accidents within company guidelines.
• Assist with safety sections for reports, tenders and proposals.
• Actively participate in safety training.

Other

• Prepare and implement Workpacks, including ITPs
• Detailed planning and engineering of works
• Procurement of suppliers and subcontractors
• Subcontractor and Supplier Management
• Monitor, control and update program and productivity metrics
• Enthusiastically and co-operatively undertake all site inductions as requested by the client.
• Proactively continuously monitor and evaluation systems and procedures specific to site works to ensure that they are up to date, compliant and up-to-date in line with best practice.
• Actively participate in regular learning and development programs to continually enhance and further develop skills and continuously improve capabilities and performance.
• Portray a professional approach at all times through attitude and appearance.
• Ensure that work space is well managed, tidy, organised and safe.
• Comply with all UGL systems and processes and expected behaviours and standards.

Qualifications and Education Requirements

• Mechanical Engineering Qualification.
• Minimum 5 years’ experience in project related disciplines.
• Significant engineering experience throughout, design, construction and commissioning on Brownfields and Greenfields projects.
• Technical experience includes; rotating equipment, static equipment, GE equipment, materials selection, hydraulic systems, pipelines and piping components
• Strong communication skills (oral & written) including strong negotiation and influencing skills and the ability to establish effective working relationships with a variety of people at different levels both internally and externally.
• Demonstrated ability to work independently to organise and prioritise demands, handle multiple complex tasks simultaneously, set and meet deadlines and follow-through within a fast paced environment with multiple and competing demands
• Proficient skills in computers: MS Word, Excel, Access, Outlook
• Leadership ability

The Civil Engineer is responsible for providing engineering and administrative coordination for the design, supply, construction and testing of the project. The primary challenge of this position is to ensure the project is completed in a timely and cost effective manner to meet contractual arrangements made with the client. Responsibilities will focus on projects with bulk earth works and civil works.

Key responsibilities and accountabilities

Safety

• Undertake all responsibilities in a safe manner.
• Ensure a safe working condition is present for all employees, contractors and visitors.
• Participate in daily pre-start meetings.
• Use appropriate personal protective equipment and safety systems such as job safety analysis, pre-work checklists and risk assessments.
• Comply and have input into safe working procedures.
• Report hazards, incidents and accidents within company guidelines.
• Assist with safety sections for reports, tenders and proposals.
• Actively participate in safety training.

Technical

• Manage interface between UGL Electrical/Structural Engineers and Civil design consultants
• Liaise with subcontractors to ensure job is constructed to the drawings, to the customer requirements
• Attend meetings with client taking a lead role on items like bulk earth works and civil works
• Liaise with Client on all technical aspects of the project
• Ensure that the survey of installations throughout the project is conducted in a professional manner with all results being reviewed and accepted as correct with actions coordinated and documented.
• Verification of all Subcontractor earth works and civil works quantities for progress claims
• Assist the Project Manager with compliance to the documentation required under the UGL Management System
• Review and plan the project with the Project Manager to ensure technical aspects of job are clear and to become familiar with contractual arrangements made with client
• Liaise with Construction Manager to ensure job is on schedule
• Provide a focal point for all technical based queries for associated subcontractors/suppliers.
• Provide engineering advice for subcontractors/suppliers
• Liaise with the Project Manager and the Project Planner regarding schedule issues and status of activities
• Prepares with the Quality Manager all Inspection and Test Plans and associated Project Specific Procedures
• Ensure that the quality requirements of the client are adhered to and that company procedures are followed
• Assist the Project Manager with all procurement and purchases of goods and services
• Assessment of risks and hazards involved in tasks, and methods to manage the hazards in order to prevent incidents, injury and damage
• Assist the Project Manager in preparation of monthly reports and also attends the monthly report meetings with Client
• Prepare and circulate the minutes of the monthly meeting with Client
• Responsibilities as per Work Health Safety Training Needs Analysis Matrix
• Propose creation and/or modification of HSSE documents within the management Ensure compliance with all record keeping requirements
• Undertake any adhoc projects, initiatives, tasks as directed by the Construction Manager

Policies and Procedure Responsibilities

• Ensure compliance with all UGL HSSE policies, procedures and relevant legislative requirements.
• Ensure compliance with UGL’s Fitness for Work Policy, including undertaking your own Drug & Alcohol responsibility of care and submitting to random testing as required.
• Ensure compliance with all emergency plans and procedures and ensuring they are displayed as appropriate within your area.
• Ensure compliance with all relevant Safety legislation.
• Ensure all work is compliant with UGL’s Quality Management Systems policies and procedures and ISO 9001:2008 requirements.
• All personnel are responsible for ensuring the quality of their work meets specified standards and requirements.
• Raise any non-conformances, with regard to product or process, with immediate manager or supervisor.
• Ensure compliance with all UGL & Group HR policies & procedures and legislation including Equal Employment Opportunity and Harassment Legislation.
• Ensure compliance with all IT policies & procedures in particular with regards to: appropriate access and use of systems/software, security of data and policies pertaining to viewing/ copying/ downloading of inappropriate, offensive or sexually explicit material.
• Ensure compliance with all Procurement and Asset Management policies and procedures.
• Ensure compliance with all policies and procedures pertaining to commercial obligation, risk management and protection of all intellectual property.

Qualifications and Education Requirements

• Bachelor of Engineering (Civil/ Structural/ Building)
• RPEQ certification desirable
• AS 9001 Quality Systems knowledge
• Minimum 5 Years’ Experience in project related disciplines
• Strong communication skills (oral & written) including strong negotiation and influencing skills and the ability to establish effective working relationships with a variety of people at different levels both internally and externally.
• Demonstrated ability to work independently to organise and prioritise demands, handle multiple complex tasks simultaneously, set and meet deadlines and follow-through within a fast paced environment with multiple and competing demands
• Proficient skills in computers: MS Word, Excel, Access, email

Halliburton invites qualified candidates to apply for the Software Engineer position.

The Software Engineer will leverage his/her strong software design and programming skills to provide technical leadership and build software solutions to address complex business needs.

Responsibilities

• Design and develop professional quality desktop applications in an agile environment
• Perform analysis to define system scope and objectives in order to develop and/or modify existing engineering applications
• Ensure the Technical Software Development process is optimized and projects are on track
• Define requirements, functional specifications, and testing documentation for various engineering software applications
• Design and develop unit test for code validation and automated regression testing of overall systems validation
• Incorporate lab testing and field testing with various cross-functional teams
• Job role contributes to value creation

Required Education and Skills

1. Bachelor’s degree in Computer Engineering or Computer Science
2. Minimum 3 years of related experience in software development.
3. Self-initiative, independent and a good team player
4. In addition to the above, candidate must have a minimum of 3 years of experience in the following

• Strong development experience using C++
• Developing desktop applications and reports using C#, Python, HTML, Java Script, XML, JSON technologies
• Developing Graphical User Interfaces (GUI) using WPF/XAML and MFC
• Developing multi-threaded applications
• Developing Real-Time solutions (applications that run within a fixed-time constraint)
• Developing software using SQL, MS Access DB and MongoDB
• Developing software via Agile software development methodology
• Debugging software applications at different stages of maturity, ranging from development-prototype through to commercial-production maturity levels
• Developing, debugging, and supporting software applications both locally and in remote locations
• Developing software that directly interfaces with electrical devices (sending/receiving data, controlling electrical devices via software)
• Experience working in cross-functional teams including mechanical and electrical engineers, acoustic and electromagnetic scientists (SME), and software architects
• Experience in Embedded Software development and Real-Time Operating System is added advantage

**Candidates having qualifications that exceed job requirements will receive consideration for higher-level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs.

Work Location: 315 Jalan Ahmad Ibrahim Singapore 639940 (company transport provided)

Work Schedule: 7:30 am to 4:30 pm

We are seeking a motivated and detail-oriented Junior Engineer to join our Digital and Factory Automation team. This role will provide hands-on support for automation projects across various manufacturing and digital processes. The ideal candidate will have a strong technical foundation, a passion for innovation, and the ability to contribute to the continuous improvement of automated workflows.

You will work closely with senior engineers, supporting the design, implementation, and maintenance of automation solutions to drive efficiency, quality, and scalability in our operations.

Key Responsibilities:

• Automation Support: Assist in the design, installation, and maintenance of digital and factory automation systems, including equipment automation, process automation, and digital automation.
• Technical Implementation: Contribute to the development, configuration, and testing of automation workflows in collaboration with cross-functional teams.
• Data Integration & Analysis: Assist in the integration of manufacturing data systems (e.g., MES, ERP) with factory automation processes, ensuring data flows seamlessly between digital tools and physical operations.
• Continuous Improvement: Identify and recommend opportunities for process improvement, utilizing lean methodologies to optimize manufacturing workflows and increase operational efficiency.
• Solving & Maintenance: Provide technical solving for automated systems, identifying root causes of issues and supporting the implementation of effective solutions.
• Documentation & Reporting: Maintain detailed project documentation, including design specifications, testing results, and operational guidelines. Support the generation of reports on system performance and optimization metrics.
• Collaboration: Work closely with senior engineers, IT, and production teams to understand operational needs and align automation solutions with business objectives.

Qualifications:

Education

Bachelor’s degree in Engineering (e.g., Electrical, Mechanical, Automation, Mechatronics, or a related field) or equivalent technical experience.

Technical Skills

• Basic knowledge of automation systems, PLC programming, SCADA, and control systems.
• Familiarity with Industrial communication protocols (e.g., OPC, Modbus, Ethernet/IP).
• Understanding of data management tools and basic scripting (Python, SQL) is a plus.
• Knowledge of digital tools such as Microsoft 365 tools such as Power Apps, Power Pages, Power Automate & Power BI or MES systems is desirable.

Experience

• 0-2 years of experience in factory automation, digital systems, or a related engineering field.
• Exposure to manufacturing processes and workflows is an advantage.
• Preferred programming experience (Method Development) with Liquid Handlers such as Tecan and Hamilton

Soft Skills

• Strong problem-solving skills and attention to detail.
• Ability to work independently and as part of a team.
• Effective communication skills, both written and verbal.

Additional Requirements

• Willingness to learn and adapt to new technologies and methodologies.
• Basic understanding of safety and quality standards in manufacturing environments.
  

• Design: Create plans, blueprints, and models, and design systems like heating, ventilation, lighting, and air conditioning
• Review: Review and evaluate blueprints and designs, and identify and fix issues
• Analyze: Analyze structures to ensure they can withstand their intended use and environmental conditions
• Comply: Understand and comply with regulations and building codes
• Test: Ensure safety and test systems
• Monitor: Use computer-based software to design and monitor systems
• Collaborate: Work with architects, civil engineers, or construction crews to develop solutions to structural problems

We are looking for a dedicated ITSM Engineer with at least 2-3 years of experience in ITSM to join our growing team. In this role, you will be responsible for implementing and managing IT Service Management (ITSM) processes and tools to improve service delivery and support for our external clients. You will work closely with cross-functional teams to ensure best practices are followed and that our IT services align with business objectives.

Key Responsibilities:

• Design, implement, and optimize ITSM processes, including Incident Management, Change Management, Problem Management, and Service Request Management.
• Administer and support ITSM tools (e.g., BMC, ServiceNow, Jira Service Management) to enhance service delivery and reporting capabilities.
• Collaborate with IT and business teams to define service levels, create service catalogues, and ensure compliance with agreed-upon service level agreements (SLAs).
• Analyse service performance metrics and trends to identify areas for improvement and implement solutions.
• Collaborate with the sales team to understand client requirements and demonstrate how our ITSM solutions can address their specific needs.
• Prepare and deliver presentations, demos, and workshops to potential clients showcasing the capabilities and benefits of our ITSM tools.
• Facilitate training sessions and workshops to promote ITSM best practices and tool usage across the organization.
• Assist in the development and maintenance of ITSM documentation, including process flows, user guides, and knowledge articles.
• Participate in continuous improvement initiatives to enhance IT service quality and efficiency.

Job Requirements:

• 2-3 years of experience in Design, Implement or operations of IT Service Management tools or a related role, with a strong focus on ITSM tools and processes.
• Proficiency in ITSM platforms such as BMC, ServiceNow, Jira Service Management, or similar tools in deployment and operations.
• Understanding of ITIL (Information Technology Infrastructure Library) frameworks and best practices.
• Experience with incident, change, and problem management processes.
• Strong analytical and problem-solving skills, with the ability to manage multiple tasks effectively.
• Excellent communication and interpersonal skills, with a collaborative approach to working with teams.
• Experience integrating ITSM tools (e.g., ServiceNow, BMC, Jira) with other enterprise systems (e.g., monitoring tools, CRM, ERP).
• Proficiency in using APIs to connect ITSM tools with other applications to streamline workflows and data exchange.
• Familiarity with integrating third-party services or applications that enhance ITSM capabilities (e.g., chatbots for incident reporting).
• Proficiency in scripting languages (e.g., Python, PowerShell) to automate repetitive tasks and enhance ITSM tool functionality.
• Ability to design and implement automated workflows that enhance service delivery and reduce manual intervention.

Preferred Qualifications:

• ITIL certification or other relevant ITSM tools certifications.
• Familiarity with automation tools and techniques to streamline ITSM processes.
• Experience in project management or agile methodologies.

Work location: Jurong East

General Overview

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time.

Job Responsibilities:

• Prepare method statements,
• Liaise with the stakeholders (e.g. clients, consultants) on permits, drawings, and design matters. Ensure the quality of all construction work performed on site are in accordance with the Company’s Integrated Management System, specifications, and applicable legislative requirements.
• Conduct site inspection/audit on the sub-contractor/vendor to ensure works are following approved method statements and specifications & proper sequence of work.
• Perform site inspection and ensure that the work are carried out based on the project specification and construction drawing / final approved drawing from authorities
• Lead a team of supervisors for works coordination with main/sub-contractors and/or authorities and/or consultant on project progress and technical issues
• Planning and deployment of resources such as manpower, machinery, equipment and material
• Preparation of progress report
• Ensure the project complies with regulations and clients’ specifications
• Adhere to safety and health regulations and aim for zero accident in the workplace

Job Requirements:

• Work experience of rigid inclusion, piling, wharf superstructure, drainage works, electrical & communication works, concrete foundation works, etc. for Civil Infrastructure Project
• Diploma / Degree in Engineering (Civil) / Construction Engineering (Civil) / or equivalent.
• Familiar with our local standard and safety aspects in the construction industry.
• Strong team management and leadership skills.
• Problem solving and conflict resolution skills.
• Excellent written and verbal communication skills.
• Contract basis
• 5.5 days working week
• Project site located at Tuas

Job Description

• To drive maintenance activities to maintain high efficiency of the equipment and minimise machine downtime as per KPI.
• To lead troubleshooting and root cause analysis of machine delays especially on mechanical faults.
• To develop and implement maintenance plans on all equipment to minimise downtime.
• To monitor cost as per KPI, maintain inventory of spares, liase with vendors and partners and to coordinate activities with other departments to ensure efficient operation.
• To develop, plan and implement automation projects to improve machine safety, reduce human intervention and maximise productivity.

Job Requirements

• Bachelor Degree in Mechanical / Electrical Engineering or equivalent studies
• Minimum 2 years in the maintenance field
• Experienced in automation, mechanical & electrical maintenance in a manufactoring environment
• Safety conscious
• Able to work in a hot and dusty environment

Job Description:-

• Assist in managing the overall project from concept to completion, including support in planning, scheduling, budgeting, and coordinating with stakeholders, while following the Project Quality Plan, Safety Management Plan, and Building Execution Plan.
• Assist in the preparation and management of project documentation, including drawings, specifications, and weekly progress reports.
• Work with design engineers for as-built drawings, section drawings.
• Supervise and monitor workers / welders on site for installation or maintenance.
• attend site meetings with clients / architects and authorities on project technical matters.

Requirements:-

• Minmum Diploma in either mechanical, Electrical or Construction Engineering or other relevant discipline.
• Required skill(s), MS Office, MS Project AutoCad.
• Has work experience in construction sites.
• Responsible team player with the ability to work independently in challenging projects and timelines.

Job Description & Requirements

· Assist PM in project planning & execution.

· Handle technical matters such as preparing method statements, construction program, shop drawing, & other submissions related to project.

· Liaises with clients, consultants, contractors and government authorities.

· Other works assigned managers

Requirements:

· Degree in Civil Engineering (recognized PE board or Commissioner of Building Control for RE registration).

· Min 3 years of relevant working experience in road works.

· Knowledge in CAD

· Class 3 driving license

· Able to work independently

· Familiar with road work construction field

· Attractive Remuneration Package

Qualified candidates, please send in your updated resume in MS Word format via APPLY NOW

Your resume must include the following information: -

*Current and expected salary

*Reasons for leaving

*Date of availability

We regret that only shortlisted candidates will be notified

Job Description & Requirements

· Assist PM in project planning & execution.

· Handle technical matters such as preparing method statements, construction program, shop drawing, & other submissions related to project.

· Liaises with clients, consultants, contractors and government authorities.

· Other works assigned managers

Requirements:

· Degree in Civil Engineering (recognized PE board or Commissioner of Building Control for RE registration).

· Min 3 years of relevant working experience in road works.

· Knowledge in CAD

· Class 3 driving license

· Able to work independently

· Familiar with road work construction field

· Attractive Remuneration Package

Qualified candidates, please send in your updated resume in MS Word format via APPLY NOW

Your resume must include the following information: -

*Current and expected salary

*Reasons for leaving

*Date of availability

We regret that only shortlisted candidates will be notified

Authorities and Responsibilities

1. Ensure all fabrication work is done with acceptable quality by daily monitoring include inspecting according to specification, procedure and applicable standards.
2. Understand all technical specification and standard compliance and ability to handle troubleshooting project correction.
3. Prepare welding methods, PQR assembly and other CWI duties.
4. Co-ordinate, communicate with member even carrying out inspection of all the welding and associated actions in accordance with the approved Welding Procedure Specification, drawings and Company Specification and requirements.
5. Co-ordinate and liaise with Production personnel to ensure that all inspection stages comply to inspection and test plans on material or structure.
6. Witness and verify all tests include reinstatement etc. and prepare reports after such tests are conducted.
7. Verify product identification through material verification inspection and periodical random checks on site.
8. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives in term of quality control/assurance of all production fabrication works/projects.
9. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools include all documentation, procedure qualification records accordance to customer specification and code.
10. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
11. Manage customer complaints, corrective and preventive action programs and Administer and manage continuous improvement program for all QA processes.
12. Work closely with customers, production and suppliers to meet the quality requirements.
13. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
14. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
15. Manage the implementation / schedule of calibration control.
16. Participate in the implementation of risk assessment and risk control of medical devices.
17. Any other tasks and responsibilities assigned from time to time.

Competence Requirement

• Min. ITE-NTEC/Diploma/Degree level PE/ME or its related discipline.
• Fresh Degree or min 3 years in Quality Assurance in production/fabrication/welding environment or it relevant experience in QC/QA environment.
• Perform CMM programming, smart-scope and QC measuring tools/equipment.
• Certified with welding certification by American Welding Society, Certification Welding Inspector, AWS-CWI. - Optional
• Minimum 3 years of related experiences in welding capacity in structural fabrication.
• Able to interpret technical drawings and reading symbols.
• Understand the quality principles, standards, internal business systems and processes.
• Good interpersonal skills, ability to communicate and Works well with all levels of staff and technically competent.
• Good knowledge of International Codes and Standards (ASME, AWS, ASTM, API).
• Basic Knowledge and usage of Microsoft Office
• Sound Technical knowledge on steel structural and steel fabrication procedures and welding inspection.
• Basic knowledge of ISO 9001 and OHSAS 18001 Management system

JOB DESCRIPTION

· Embedded system software development

· IoT related protocol and software development

· Peripheral device driver and Wi-Fi related software development

· Customer issues support

JOB REQUIREMENTS

· Bachelor’s degree or above in Computer Engineering, Electronics or Networking engineering

· Familiar with C/C++

· Familiar with embedded system and experience in driver-related development is an advantage

· Peripheral and Wi-Fi-related experience is an advantage

· Good communication and team working skills

Position Summary

Independently to develop and apply Electrical & Automation design and knowhow on marine and offshore vessel to comply with Class and Technical specification requirements.

Tasks and Responsibilities

• Involved in all electrical engineering designs, calculations, preparing bill of materials, and liaise with customer and suppliers for any engineering query.
• Involved in design and construction document preparation and submissions.
• Involved in technical reviews and clarifications with customer and suppliers.
• Involved in coordination of design with other engineering disciplines.
• Involved in construction, installation, testing and commission activities.
• Involve in identifying the Company scope of work in the project.
• Involve in solving technical issues that arise in the project.
• Involve in monitor the progress of the document submission.
• Some drafting scope and also guide drafters for drafting

Job Requirement

• Minimum 3-5 years of relevant work experience in the marine/offshore industry Electrical & Automation newbuilding engineering design.
• Must know basic electrical design knowledge.
• Know how to do electrical cable sizing, voltage drop, cable gland sizing and cable schedule.
• Know how to do lighting calculation and can operate lighting software like Dialux and etc.
• Know how to do overcurrent protection device sizing and selection.
• Know how to do electrical equipment installation.
• Know how to operate and draw in AutoCAD.
• Have knowledge in basic fire and gas detection.
• Have knowledge in basic HVAC electrical and instrumentation.
• Must know how to operate MS office (minimum Word and Excel).
• Minimum Diploma/Degree in Engineering or related field