Key Responsibilities

Preparation and present DFM (Design for manufacturing)

Construct the Tool design assembly layout

Prepare and issue 2D detail insert & mould base drawing with appropriate tolerance for manufacturing

Tool design must be manufacturability and can estimate cycle time base on as design

Tool design concept able to run production efficiently with lowest cycle time

Tool design capable to run auto cycle

Assist in Customer Engineering Change

Continual improvement on the tool concept

Conduct tool design review to present his / her design concept

Endorse and release tooling drawing to tool room for mould manufacturing

Raise Purchase requisition for the tooling related direct and indirect purchase

Any other duties and responsibilities delegated by superior

Responsibilities

· Responsible for providing preventive maintenance service for BMS (Building Management System)

· Carry out troubling shooting, analyzing and rectification of the system on time

· Support client with system operation and recommendation for improvement

· Data analyzing and determination of the system operation status

· Response client’s request and attend the issue in short notice

· Supervise subcontractor to carry out the work safely

· Provide the assistance to colleague and mentoring actively

· Ensure all works carried out in accordance with the specified quality and EHS standards

· Prepare and submit quotations, including material, labor, and scope of works

· Perform replacement/repair, fit out works/A&A for existing BMS site

· Perform weekly standby on rotation schedule

· Perform calibration and verification of BMS sensors annually

· Provide sales support BMS service and site survey

Requirements

· Diploma/ Degree from a recognized technical institute

· Hands on experience in BMS Control System

· Hands on experience in programming languages and logic gates

· Familiar with digital fundamental

· Knowledge on basic networking

· Strong customer management & problem solving skills

· Excellent communication & presentation skills

· Skilled in the use of MS office

· Knowledge on ACMV system

COMPANY DESCRIPTION

We are one of the largest one-stop Underground Utilities Infrastructure companies based in Singapore. We provide Underground Utilities Infrastructure construction and maintenance, sewer pipeline rehabilitation, road and airfield construction and maintenance as well as asphalt pre-mix production and construction waste recycling.

RESPONSIBILITIES

• Assist the Project Manager with daily project activities, including coordination, scheduling, planning, and implementation of work.
• Conduct regular site inspections to ensure construction activities are carried out in compliance with approved designs, contract specifications, safety standards, and quality requirements.
• Provide recommendations for corrective actions when deviations from the project scope, schedule, or quality occur.
• Serve as the point of contact for clients, consultants, authorities, and internal teams, ensuring effective communication of project progress, specifications, and any challenges.
• Review project proposals and plans to align project objectives with management expectations, ensuring performance criteria and client needs are clearly understood and incorporated.
• Oversee project timelines and milestones, proposing adjustments and modifications to the schedule as needed to ensure timely delivery.
• Assist in the achievement of team goals by actively contributing to relevant tasks and maintaining a collaborative work environment.
• Liaise with clients to coordinate project plans, schedules, and deliverables, ensuring alignment with client expectations and project requirements.
• Prepare and submit all necessary documentation, including method statements, risk assessments, progress reports, monthly reports, and other key project documents.
• Prepare and submit monthly progress claims in a timely manner, ensuring accuracy and completeness.
• Perform other duties or tasks as assigned by immediate superior or Head of Department.

• Degree in Civil Engineering recognized by Singapore Professional Engineers Board (PEB)
• Minimum 3 year of experience in constructions or civil engineering
• Those with experience in underground utilities especially cable pipes will be advantageous
• Possess excellent interpersonal and communication skills
• Service-oriented client relationship and people
• Self-motivated and able to work independently
• Preferably possess a valid Class 3 license

• 6 days work week
• Preferably possess a valid Class 3 license

Other Benefits

• Enjoy a company-provided shuttle for easy transportation to and from the office, including lunch trips.
• Free access to medical teleconsultation services for your convenience.
• Portable Medical Benefits Scheme (PMBS). Enjoy an additional monthly contribution directly to your Medisave account.
• Comprehensive Medical Benefits. Includes coverage for dental care and health screening through the company's provider.

Why Join Us

• Dynamic Work Environment: Thrive in a fast-paced, ever-evolving workplace that offers new challenges and opportunities every day.
• Varied Responsibilities: Take on diverse and exciting tasks that keep your role engaging and fresh.
• Collaborative Team Culture: Join a team that values open communication, efficiency, and a strong commitment to security.
• Growth and Development: Benefit from a supportive environment with ample opportunities for professional growth, skill development, and career advancement.

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

The position holder reports to Sales Manager/Senior Manager and must carry out the assigned duties and responsibilities and be able to work closely with other departments and other functional managers within the organization.

He/She MUST at all times maintain the confidentiality of all prices and plans and SHALL NOT disclose confidential information without the approval of her/his Manager.

Key Tasks:

1) Sales Functions

• Achieve and excel against quarterly sales targets.
• Prepare sales quotations and proposals based on technical specifications.
• Follow up sales enquiries.
• Build and maintain good customer relations with existing accounts.
• Actively pursue new sales opportunities.
• Grow sales in the assigned segment.
• Monitor marketplace information and provide recommendations.
• Regular customer visits to position En-Syst as the preferred product/solution provider.
• Provide appropriate technical support to customers, consultants, and prospects.

2) Administration and Operational Functions

• Keep good records of documentation, including enquiry register log.
• Provide monthly sales updates and reports.
• Co-ordinate and lead meetings.
• Prepare a sales work order and handle over to the project team.
• Lead and execute improvement/new processes and customer service experience.
• Ensure process conformance and local legislative compliance with appropriate standards and authorities.

3) Other Assignments

• Shall carry out any project/task/work assigned by Immediate Manager, General Manager, and Directors as and when required to support the business.

Requirements

Education

• Candidate must possess at least ITE/Diploma/Advanced/Higher/Graduate Diploma in engineering, business, or marketing.

Knowledge / Experience / Others

• Two to three years of industry sales experience and meeting sales goals.
• Customer service and relations skills.
• Adept at Microsoft Office and quickly pick up ERP software navigation skills.

Personal Competencies

• Shall have valid Singapore class 3 driving licence.
• Able to perform multi-tasking.
• Independent, team player with good interpersonal skills.
• Competitive and extroverted as the role is customer facing and requires winning people over.
• Self-initiated to gather information about the market.
• Proponent of embracing technology to improve the sales operations process than deferring back to ‘entry level’ solutions.

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team.

Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Scope and Responsibilities:

• Coordinate equipment and process validation execution, data collection and summaries.
• Perform documentation and release technical requirements/ drawings, write, review or update work instructions for engineering and consumables production lines.
• Assist in MES ticket and process verification/ validation activities.
• Assist Process Engineers in providing direct support to troubleshooting, sustaining and continuous improvement for consumables production lines related to new product development, yield, quality and throughput.
• Recommend and assist in implementation of improvements in a production environment to meet goals across multiple operations and technologies.
• Assist with design and execution of controlled experiments to optimize processes; document and analyze process test results.
• Support with Engineering/ R&D teams to develop processes for new products and improve processes of existing products.
• Supports nonconforming material analysis and investigations.

Qualifications:

• Possess good understanding of manufacturing process and regulated biotech or medical devices manufacturing environment.
• Capable of executing test plans for components, materials, systems and processes.
• Competent in Microsoft word, excel, powerpoint
• Knowledge in product & process feasibility study, line validation, qualification and optimization to production
• Excellent team player, interpersonal and communication skill.
• Well-developed documentation and technical report writing skills
• Able to work well under stress, both internally and across functions and perform multitasking.
• Proactive, innovative and self-motivating.
• Team player with strong focus on safety, quality and timeline.
• Diploma/ Bachelor in Engineering, Sciences or related field
• Experience in manufacturing/ FDA-regulated environment is a plus.

Job Title: QA/QC Engineer

Salary Range: S$3,400 – S$4800

Report to: QA/QC Manager

Min Qualifications / Experience :

1) Degree in Mechanical Engineering holder with 2-4 relevant experience

Job Skills Required:

1) Knowledge in Microsoft office applications such as Excel, Word, Power Point and

related spreadsheet software.

2) Must be able to work well with others in a team setting.

3) Ability to work independently.

4) Must be able to effectively handle many concurrent projects.

5) AWS, ASME AS, PD5500.

Duties & Responsibilities

a. Assist QA/QC Manager in the managing the QA/QC department.

b. Establish, implement and maintain the QC system for products that need to comply with ASME codes.

c. Prepare, control and maintain the QC Manual in accordance with ASME code.

d. Initiate quality programs and report to QA/QC Manager for the current product quality level.

e. Develop Inspection Test Plan (ITP), inspection and testing procedures.

f. Supervise and guide the team of QC inspectors and administrative assistant.

g. Control the usage of ASME stamps and review ASME’s MDR forms.

h. Maintain and control the welding procedures (WPS) and welder performance qualification records.

i. Any Adhoc assignment given by QA/QC Manager.

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for ACMV system installation and troubleshooting on site
• Prepare material requisition for all ACMV equipment and materials
• Prepare work programme for ACMV works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with ACMV suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for ACMV system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling ACMV works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team.

Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Responsibilities:

• Lead the protocol generation and review for the assigned areas (i.e. process equipment, facilities, utilities and laboratory equipment)
• Review vendor or construction turnover document
• Review construction walkdowns to assure compliance with design
• Lead or direct execution of full C&Q project lifecycle, including URS, Design Verification, FAT, SAT, DQ, IQ, OQ and PQ etc.
• Trouble shooting equipment with a cross functional team
• Manage summary report writing wherever required
• Verification of Construction Contractor’s Document deliverables (CTODs) and Vendor Document deliverables (VTODs)
• Support the review and revision of design document, wherever required
• Liaise with identified stake holders, including suppliers/contractors
• Provide SME input wherever required
• Manage the assigned system handover
• Support the management of project schedule
• Compliant to quality and safety requirements
• Complete trainings in a timely manner
• Support company operation and business as required
• Any other project responsibilities specified in the individual OAN and organizational responsibilities assigned by management

Requirements:

• Minimally a Bachelor of Science/ Bachelor of Engineering or related scientific degree
• At least 7 years of experience in Pharmaceutical industry
• In-depth technical knowledge in the assigned area and associated regulatory requirements, guidelines, and other industry best practices
• Ability to work in a fast paced / dynamic work environment
• A fast learner with “Can-do” attitude
• Good time management skill and great attention to detail
• Proficient presentation and facilitation skill is a plus

You're a Software Engineer with excellent technical, communication, and organizational skills, combined with deep software knowledge on C#, C++ and VB.

Responsibilities

• Software development for Industrial Automation Machines using C# Visual Basic, C++

• Liaise with customers on machine specification.

• Evaluate and implement other possible system for machine programming.

• Test and troubleshoot machines.

• Conduct machine training.

Requirements

• Degree/ Diploma in Electrical Engineering/ Computer Science.

• Developing software for Windows-based applications.

• Experience in designing Automated machine is an added advantage.

• Proficiency in C# language.

• Knowledge of C++ and Visual Basic language.

• Ability to work under tight deadlines and self-motivated.

• Problem solving/ troubleshooting skills.

• Initiative and able to work independently.

• Good coordination/ communication/ presentation skills.

• Good command of English.

Task and Responsibilities

• Read and understand technical specifications, prepare job-list, work schedule, plan material take off and manpower planning of yard men and contractor for each given jobs. Report department head and update any special materials for specific project (if require more lead time or needs to purchase from overseas)
• Advance planning man and materials, including all facilities.
• Generate, Control and monitor department budgets.
• Order the material required as per material take off and co-ordinate with purchase department for timely delivery of the materials
• Cooperate with project manager on appropriate procedures and schedule to complete the job.
• Ensure safety, discipline and welfare for all subordinates.
• Carry out trade work as per specifications and to the satisfaction of the owner/class & timely completion. Ensure good quality work as per work instructions. Ensure all trade work mark-up drawings to be made and approved by owner’s representative
• Maintain good housekeeping and Safety at all times on board vessel & workshop. Ensure all workers follow safe work procedures at all times
• Responsible for minimum wastage of materials and balance material to be accounted and returned to store at the end of the project.
• Prepare, setup and review department documents (RA, SOP, Internal & External auditing, OR) with supervisor and manager
• Lead group of supervisors, fitters and sub-contractors.
• Ensuring optimum work processes and equipment utilization.
• Understand all jobs given supervise and give detail instructions to subordinates and contractors report to department engineer or department head.
• Ensure all work completion reports will be done by Ship in-charge, verify & submit to owner Rep to get sign before handing over to commercial department on time (before vessel delivery)
• Monitoring vessel daily job deployment report to achieve target on time.
• Perform other related jobs as assigned by DH.
• Ensure Permit to work system is followed strictly.
• Identify parts and components needed for repairs or replacement and to liaise with regional vendors for replacement of critical spares for vessels.

Job Requirements

3 years and above of relevant experience in ship building & Ship repair industry.

• Possesses in depth knowledge on Marine Machinery Works.
• Able to speak and write in proper English.
• Self-initiative and motivated individual.
• Possesses quality leadership skills to lead and supervise people under their charge.
• Able to give constructing advice based on their qualified experiences.

We are looking for an innovative Civil Engineer to design, develop and construct a huge range of projects of the physically and naturally built environment from conception through to completion. You will have a say in how the world looks like, work in a fast growing dynamic industry, contribute towards healthy economies and make a lasting positive impact to society.

• Lead the team in executing electrical work during the construction phase, including cable tray installation, cable pulling, panel installation, cable termination, and testing/commissioning for MV/LV switchgear, transformers, UPS, DCIS/HMI, etc.
• Monitor and inspect construction activities to ensure compliance with design documents.
• Manage a team comprising supervisors, sub-contractors, and vendors.
• Responsible for electrical interfaces with the operational team, conducting meetings, and providing technical clarifications.
• Investigate and troubleshoot electrical switchgear faults or failures, implementing effective corrective and preventive actions.
• Analyze and enhance equipment reliability to prevent recurrence, collaborating with operation groups and external contractors.
• Prepare documentation for maintenance work, ensuring compliance with safety standards, and utilizing appropriate Method Statements and Risk Assessments, meeting BCA requirements.
• Collaborate cross-functionally to ensure systems, equipment, and rooms align with internal customers' needs.
• Review inspection and testing plans for electrical and instrument system installations through relevant checklists.
• Coordinate with stakeholders to ensure the smooth completion of projects.

• Programming, testing, commissioning, and handover of Electrical Systems (22KV Switch gears & transformers, protection relays, and hipot)
  Prepare and maintain all required commissioning documentation which includes client submission.
• Supervision and Monitoring of defined test procedures start-up sequences, reliability test runs, and performance tests.
• Monitoring of functional and operational tests of various equipment to prepare the equipment for the first start-up.
• Manage and supervise a team of experienced commissioning technicians to execute Live equipment testing in a highly professional and safe manner
  Ensure QAQC integration within commissioning processes and procedures.
• Witness and provide contractor resources to support FAT as required.
  Preparation of inspection reports, certificates, progress reports, and site correspondence.
• Liaise closely with the client QAQC/Testing teams.
• Generating MSCR's (Maintenance System Change Request) at the project handover stage.
• Ensure that commissioning acceptance criteria is aligned with design specification and client requirements.
• Any other duties required by the Commissioning Manager.

• Conduct onsite inspections and troubleshooting at client premises.
• Provide hands-on preventive maintenance, repair, and equipment installation.
• Adhere to company field processes and protocols.
• Carry out mechanical/electrical device system upgrades.
• Collaborate with engineers on project management, equipment installation, and maintenance services.

Job Description

• Develop detailed designs, layouts, and specifications for piping systems, ensure proper pipe support design based on piping loads, thermal expansion, and seismic considerations.
• Identify appropriate materials, ensure material compliance with project specifications, applicable codes, and standards such as ASME, ANSI, and local regulations.
• Work closely with process, mechanical, civil, and electrical teams to ensure piping systems are integrated seamlessly with other systems
• Coordinate with procurement, construction, and commissioning teams to ensure timely delivery and installation of piping systems
• Prepare piping-related project deliverables including technical drawings, specifications, data sheets, and material take-offs
• Liaise with suppliers for quotation and technical evaluation of quotation. Review and approve piping construction drawings, isometrics, and support drawings
• Lead piping design reviews, coordination meetings, and vendor technical discussions
• Manage piping engineering scope, schedule, and budget, ensuring project milestones are met

Requirements

• Degree in Mechanical / Piping Engineering
• For degree holder, minimum 5 years of experience in piping design and engineering. For Diploma holder, minimum 8 years of experience is required.
• For senior position, candidate must have at least 10 years of experience, including leadership or project management experience.
• Strong expertise in piping materials, piping arrangement, stress analysis, and design of piping systems
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Knowledge of international and local standards (e.g., ASME, ANSI, BS EN, PUB Singapore guidelines)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping engineering software, and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Job Description

• Prepare and review the design of the Mechanical Works, such as piping & equipment drawings, calculation and data sheets
• Involve in daily coordination with internal C&S and BIM team to resolve all the clashes, penetration etc
• Develop the work schedule and coordination of the project works to ensure project is on schedule
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of mechanical works
• Handle and resolve all site technical relating matters
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met
• Prepare all relevant checklist for Installation and Testing & Commissioning Works
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules
• Collaborate with internal stakeholders, clients, consultants, vendors and contractors
• Attend to clients’ comments and ensure clients’ approval & acceptance to all Mechanical Works related design, installation and Testing & Commissioning Works

Requirements

• Min degree in Mechanical Engineering
• 5 to 8 years of relevant experience in the construction industry. Working experience in water or wastewater industry will be an advantage
• Familiar with Auto CAD, Mechanical, Structure drawings and Microsoft Office
• Experience in design, installation, testing and commissioning of the mechanical works e.g. pipings, pumps etc
• Experience in Project Execution, Project Coordination, Supervising and Coordination with sub-contractors, consultant, and Client
• Good technical knowledge in understanding the Mechanical System
• Well versed in BIM software i.e. Bentley and Navisworks
• Team player with good interpersonal skills
• Meticulous and analytical with excellent problem-solving skills
• Highly motivated and able to work independently with minimal supervision

Authorities and Responsibilities

• Act as primary customer contact, and provide technical support and regular update to customers on project development in a timely manner.
• Communicate and co-ordinate with clients and relevant parties pertaining to the technical requirements and engineering aspects of the assigned projects.
• Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the project specifications, client's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their project execution.
• Provide expertise and advisory support to enable operations are effectively and responsibly execute, and consistently maintain, quality workmanship and conformance to design and project specifications, and good manufacturing / engineering practices.
• Plan, monitor and control projects from the receipt of orders through to installation / completion at the customer's site. Additionally to review and competently controlled the completion of project within the allocated budgets and schedules.
• Responsible for getting project acceptance by customers.
• Lead the cross-functional project team and work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
• Participate in the implementation of risk assessment and risk control of medical devices.

Competence Requirements

• Preferred to have NTC / Diploma / Degree in Mechanical / Manufacturing / Precision Engineering or equivalent.
• Preferably with 3 – 6 years of related experience in which 2 years of involvement with project management in a contract manufacturing environment.
• Preference will be given to those who have experience working with multi-discipline project teams in a manufacturing equipment or system integration environment.
• Working knowledge with precision machining / assembly processes is an advantage.
• Able to work effectively with customers according to deadlines and under pressure-filled conditions.
• Should be innovative, independent and motivated.

Job Description

• To drive maintenance activities to maintain high efficiency of the equipment and minimise machine downtime as per KPI.
• To lead troubleshooting and root cause analysis of machine delays especially on mechanical faults.
• To develop and implement maintenance plans on all equipment to minimise downtime.
• To monitor cost as per KPI, maintain inventory of spares, liase with vendors and partners and to coordinate activities with other departments to ensure efficient operation.
• To develop, plan and implement automation projects to improve machine safety, reduce human intervention and maximise productivity.

Job Requirements

• Bachelor Degree in Mechanical / Electrical Engineering or equivalent studies
• Minimum 2 years in the maintenance field
• Experienced in automation, mechanical & electrical maintenance in a manufactoring environment
• Safety conscious
• Able to work in a hot and dusty environment

Job Description

• Prepare single-line schematics in AUTOCAD.
• Amend layout drawings and detail drawings.
• Assist in preparing project submission DWGS.
• Assist in material take-off.
• Assist in compiling the material list.
• Assist in preparing tender documents for submission.

Requirements

• Degree or diploma in mechanical engineering/material engineering.
• 2 years of relevant experience in the construction industry. Working experience in the water or wastewater industry will be an advantage.
• Fresh graduates are welcome.
• Be familiar with AUTOCAD and Bentley software.
• Must have advanced computer literacy, especially in Excel.

Job Description:-

• Assist in managing the overall project from concept to completion, including support in planning, scheduling, budgeting, and coordinating with stakeholders, while following the Project Quality Plan, Safety Management Plan, and Building Execution Plan.
• Assist in the preparation and management of project documentation, including drawings, specifications, and weekly progress reports.
• Work with design engineers for as-built drawings, section drawings.
• Supervise and monitor workers / welders on site for installation or maintenance.
• attend site meetings with clients / architects and authorities on project technical matters.

Requirements:-

• Minmum Diploma in either mechanical, Electrical or Construction Engineering or other relevant discipline.
• Required skill(s), MS Office, MS Project AutoCad.
• Has work experience in construction sites.
• Responsible team player with the ability to work independently in challenging projects and timelines.

Job Description & Requirements

· Assist PM in project planning & execution.

· Handle technical matters such as preparing method statements, construction program, shop drawing, & other submissions related to project.

· Liaises with clients, consultants, contractors and government authorities.

· Other works assigned managers

Requirements:

· Degree in Civil Engineering (recognized PE board or Commissioner of Building Control for RE registration).

· Min 3 years of relevant working experience in road works.

· Knowledge in CAD

· Class 3 driving license

· Able to work independently

· Familiar with road work construction field

· Attractive Remuneration Package

Qualified candidates, please send in your updated resume in MS Word format via APPLY NOW

Your resume must include the following information: -

*Current and expected salary

*Reasons for leaving

*Date of availability

We regret that only shortlisted candidates will be notified

Job Description & Requirements

· Assist PM in project planning & execution.

· Handle technical matters such as preparing method statements, construction program, shop drawing, & other submissions related to project.

· Liaises with clients, consultants, contractors and government authorities.

· Other works assigned managers

Requirements:

· Degree in Civil Engineering (recognized PE board or Commissioner of Building Control for RE registration).

· Min 3 years of relevant working experience in road works.

· Knowledge in CAD

· Class 3 driving license

· Able to work independently

· Familiar with road work construction field

· Attractive Remuneration Package

Qualified candidates, please send in your updated resume in MS Word format via APPLY NOW

Your resume must include the following information: -

*Current and expected salary

*Reasons for leaving

*Date of availability

We regret that only shortlisted candidates will be notified