• Responsible to oversee the day-to-day planning, management, operations and safety of facilities management works and service with adequate administrative staff.
• Responsible to carry out systems' heath and obsolescence monitoring, obsolescence management, crisis management, fire safety management, investigation and carry out rooy cause analysis of the incident, not limited to accident, power outage, and systems failure.
• Shall be full-time on-site
• Contract period Jan’25 – Jun’25

Quality Assurance Department (QAD)

Job Responsibilities:

• Liaise with Maintenance team to schedule lift inspections.
• Conduct lift inspection in accordance with applicable code requirements
• Prepare inspection reports.
• Verify correction of defects.
• Perform any other duties as assigned from time to time by the Company’s authorized personnel.

Job Requirements:

• Diploma in Electrical, Electronics or Mechanical Engineering.
• Preferably 3 years of relevant working experience.
• Work experience in Lift Inspection, Testing & Commissioning or Maintenance preferred.
• Good communication skills.
• Only Singaporean need to apply

Description:

We are looking for a dedicated and talented Technical Superintendent to join our highly skilled and motivated Fleet Technical Operations Team. Our Fleet Team is responsible for the technical management of all operated vessels, ensuring compliance with latest industry standards and demands.

Key Responsibilities:

Reporting to General Manager of Fleet Technical Operations, you will be responsible to ensure efficient and safe daily technical operations of a fleet of Pure Car Carrier vessels (PCC) and Container vessels.

JOB REQUIREMENTS

Job Responsibilities:

• Manage all technical matters and ensure that safety is regarded as a primary responsibility.
• Monitor inventory control of stores and spares, performance of vessels, compliance with all applicable health, safety, security and pollution prevention regulations, certification status of vessels and ensure that at all times vessels are maintained in seaworthy condition.
• Responsible for maintenance, repairs, planned maintenance and modifications to vessels’ hull and machineries.
• To prepare repair specifications and coordinate with various repair firms for effecting major repairs, if any, during, the voyage without incurring delay to vessel.
• Plan, coordinate and execute inspections, dry dockings, lay-up and sale of vessels (in coordination with principals after making cost comparisons with various shipyards and repairers in the most efficient manner.
• Frequent sailing for ships’ inspections is required. Able to work in local and overseas shipyards to supervise dry-docking and other services.
• Follow up closely on performance of all vessels, monitor major deficiencies/defects that exist in the vessels and ensure that timely corrective actions are taken in order that the vessels performance and safety is not jeopardized. Ensure that all Charter Party requirements are being fulfilled and identify reasons for deviation if any and take remedial measures.
• Initiate innovations, savings and improvements within the area of responsibility.
• Monitor the quality of all service providers / vendors.
• Maintain regular contact with Classification societies, shipyards, repair firms, industry groups, trade associations, equipment manufacturers and designers, Government bodies and other organizations that may be helpful to carry out the assigned duties and responsibilities.
• Handling of guarantee issues with regards to new buildings.
• Liaising with Charterers, Flag State and Port State Control and ensure that all vessels certification and surveys for class, flag and international requirements are in order and valid.
• Oversee that all items pertaining to health, safety, security and pollution prevention are regularly checked with the aim of achieving high standards of safe and pollution free voyages and general well-being of all onboard the vessels. Act as a link between vessels and office.
• Manage annual financial budgets and cost control for maintenance, repairs, stores, modifications, and dry-docking, whilst ensuring compliance with Industry, Class and International regulations. (Project operating cost expenses pertaining to technical items before the yearly budgets are prepared).
• Prepare and ensure accuracy of quarterly financial reporting of vessels expenses to principals.
• Prepare yearly budget for vessels assigned.
• To ensure that all technical reports as required by various principals are timely dispatched.
• To verify all incoming reports from the vessels and identify areas which require immediate attention and take corrective actions.
• To report system non-conformities and verify that correction and preventive actions are implemented and found effective.
• Possess good crisis management abilities to manage marine incidents and accidents.

Who we are looking for:

• Degree in Engineering or other relevant degrees.
• Possess Chief Engineer Certificate of Competency.
• Minimum 14 years of sailing experience and recent 1.5 years sailing experience in the capacity as 1st Assistant Engineer on foreign going vessels especially pure car carrier vessels.
• Understand and appreciate the commercial implications of vessel technical operations.
• Detailed and analytical, and have a safety, cost and quality conscious mindset.
• Open to change management and adaptable to a fast and versatile environment.
• Good interpersonal and communication skills in English and Filipino, both written and verbal in order to perform in an international environment.

Involves overseeing the technical operations of tanker vessels on tramping trade with Oil majors and oil traders.

This role typically includes ensuring the maintenance, repair, and compliance of tankers with international regulations, managing budgets, coordinating with equipment maker, shipyards, repair companies and suppliers, and ensuring safe and efficient operation of the fleet. You should be independently assist ship staff in troubleshooting technical issues, and work closely with regulatory bodies, Classification societies, local administration to ensure adherence to SOLAS, MARPOL & prevailing maritime laws and safety standards. Regular overseas trips to inspect ships will be required. Ability to handle occasional work pressure. Ensure assigned vessels are maintained according to Company procedures & International regulations (Class, Flag, USCG, AMSA & other MoUs).

• Ensuring statutory and Class surveys of vessels are carried out in a timely manner. Arrange all Technical repairs/calibration services, safety related Services as per the schedule.
• Work closely with ship staff to ensure that all safety, environmental, and quality procedures are followed and avoid downtime.
• Conduct regular vessel inspections & audits in line with SIRE/TMSA guidelines to identify potential problems and areas for improvement.
• Conduct audits of assigned ships and conduct minimum one sailing visit/ship/year.
• Plan and coordinate vessel maintenance, repairs, and dry-dockings.
• Ensure company PMS is followed and updated and provide technical support to shipstaff as required.
• Monitor and improve the vessel performance, improve efficiency and CII ratings.
• Manage vessel budgets and control maintenance expenses.
• Monitor and review, weekly, monthly, qtrly reporting, etc, from the ships, & ensure that all records are filed in PMS/Share point/ company’s repository.
• Carry out Prepurchase inspection for the target assets and prepare for takeover of vessels.
• Attend and participate in seatrials of yard deliveries and ensure all the observations are closed out.
• Follow up Guarantee Claims of each assigned vessels with Shipyard/makers for successful closure.
• Participate in the projects assigned by the company.
• Guide and assist Technical Supdts, Technical executives and Purchasers.
• Monitor performances of ship staff & appraise Senior Officers / Engineers / Ratings as required.
• Monitoring KPIs of assigned individuals.
• Assist in Crew selection.

Requirements:

• Minimum 4-5 years of experience as Technical Superintendent in a Ship Management/Ship Owner company looking after oil/chem tankers, product tankers. Additional experience of Gas carriers is added preference.
• A minimum of 3 years’ relevant experience as Chief Engineer on Product Tanker
• Able to prioritise workload and handle the ship operations independently.
• Experience in operating ME-C engine, Framo system, BWTS and EGCS.
• SIRE/ CDI inspections.
• Independently carry out the incident investigations.
• Drydocking (including special surveys) and retrofit.
• Proficient in English language.

Job Description

• Coordinate with project manager, team and consultants to produce high-quality design & construction documents
• Mockup and organise design drawing set
• Coordinate architectural and structural details
• 3D modelling; understanding creative intent and translating to 3D
• Prepares work to be accomplished by gathering information and materials.
• Plans concept by studying information and materials.
• Illustrates concept by designing rough layout regarding arrangement, size, type size and style,
• Obtains approval of concept by submitting rough layout for approval.
• Prepares finished design layout through review process with supervisor.
• Completes projects by coordinating with other team members, utilizing previous knowledge
• Maintains technical knowledge by attending design workshops; reviewing professional publications; participating in professional societies.
• Contributes to team effort by accomplishing related results as needed.

Job Requirements

• Degree in Video Gaming, Animation, Architecture, Engineering or Interior Design
• Experience in related fields
• Organised, precise, and attentive to detail
• Great verbal, written, and graphic communication skills.
• Must speak & write fluently in English. Other languages are a big bonus.
• Self-motivated and enjoys contributing to highly collaborative teams
• Flexible and well-rounded to accommodate shifting schedules, project demands, multiple time zones, and deadlines

Job Description:

• Quotation and Tender Preparation: Prepare accurate and detailed quotations for clients, ensuring alignment with project specifications, costs, and timelines.
• Tender Submission: Prepare and submit tender documents for projects, ensuring all requirements are met and deadlines are adhered to.
• Cost Estimation: Analyze project details to estimate costs for materials, labor, and other resources, ensuring competitiveness and accuracy.
• Vendor and Supplier Coordination: Work with suppliers and subcontractors to gather necessary pricing and technical details for tenders.
• Technical Support: Provide technical assistance in reviewing and responding to project inquiries, ensuring the right solutions are proposed.
• Documentation and Record-Keeping: Maintain accurate records of quotations, tenders, and all related correspondence.
• Follow-up and Feedback: Follow up with clients post-submission to address any questions or revisions needed.

• Carry out site standing supervision and inspection of the works including any off-site fabrication and/or as instructed by the Consultant team so that works are constructed to required quality and accuracy.
• Monitor progress of the works on site and at any off-site fabrication facility and report delays immediately.
• Attend site meetings and resolve technical issues with Contractor.
• Update Consultants on Contractor's work progress on site and identify any works on critical path.
• Maintain proper and updated daily records of all works done, including records of tests, inspections, status of work, safety, site diary, materials, equipment on site, labour, day works, provisional quantities, etc.
• Verify reports and claims submitted by contractor.
• Record all variations as instructed or approved by the consultant team.
• Attend to contractor's queries and co-ordinate works of the contractor.
• Building inspection/ construction work experience is preferred

Keyrus is an international consulting firm, specializing in the integration of data intelligence and Digital solutions. With over 3000 employees spread across 20 countries, Keyrus continues to deliver on such projects to a wide range of clients from various industries including but not limited to Banking/Finance, Healthcare/pharmaceuticals, FMCG, Oil & Gas, and more.

As part of Keyrus’ solution delivery, we are also in a position to recruit and place technical consultants to complement on existing client projects with their expertise. As such, we seek innovative and agile people to support ambitious and forthcoming technological challenges.

We are looking for a skilled Technical Architect for our client's team in Singapore. This position is created to perform studies, POCs, establish frameworks/standards and deliver starter kits for development teams & production teams ensuring systems are secure & reliable.

Responsibilities

• Work closely with development teams to optimize the resource usage of solutions on our internal cloud
• Provide consultation to application teams & production teams on building & deploying containers & orchestrating them with Kubernetes.
• Provide subject matter expertise & assist in operations of the Kafka platform
• Conduct Studies & POCs to prepare production principles for new cloud services.
• Design, deliver and keep up to date architecture roadmaps, blueprints, standards with strong focus on adherence to group standards & production performance and stability.
• Communicate architectural directions and technical concepts to both technical and non-technical stakeholders.
• Proactively identify opportunities for process improvement, optimization, and innovation.

Requirements

• Total 7+ years of overall IT experience.
• Technical leadership and hands on experience in architecting and deploying solutions on Azure/AWS or GCP
• Experience building & deploying highly available and low latency systems as service-oriented architecture, event driven architecture using Spring Boot, Kafka
• Experience with Docker and container orchestration solutions (eg. Kubernetes) and Helm
• Understanding and using Continuous Integration (CI) systems (eg. Jenkins, Gitlab CI)
• Experience in managing high availability (eg. Keepalived, ALB, Elastic IP, DNS Load Balancer)
• Technical documentation writing skills to prepare architecture documents, proposals & guidelines
• Ability to learn and deep dive into new technology and business domains, and to troubleshoot problems in unfamiliar environments.

COMPANY DESCRIPTION

YTL PowerSeraya, a wholly owned subsidiary of YTL Power International, provides value-added solutions in the electricity generation and retail of multi-utilities, and tank leasing. With a registered capacity of 2,047.7MW, it is one of Singapore's largest electricity generators.

The group has 3 subsidiaries: Geneco (Seraya Energy), which retails electricity for homes and businesses; PetroSeraya, the oil storage and tank leasing arm; and Taser, operating the Tuaspring Power Plant. YTL PowerSeraya is committed to being a fair and progressive employer, adopting four Tripartite Standards under the TAFEP. In 2023, we also received the Plaque of Commendation (GOLD) at the NTUC May Day Awards.

RESPONSIBILITIES

The Technical Analyst/Consultant will document business and functional requirements and analyse and design technical solutions to meet the business requirements. The ideal candidate will have a strong background in technical analysis, excellent problem-solving skills, and the ability to work effectively with cross-functional teams including strong business stakeholder management skills.

Responsibilities

General

• Develop and maintain business, application and data architectures and specifications.
• Develop and maintain SOPs and checklists to support BAU monitoring and project implementations.
• Prepare and maintain application and data architecture documents.

Delivery

Responsibilities in difference stages of the delivery cycle

• PLAN: Support the project/delivery manager in planning and managing initiatives or projects. Candidate may be required to take on scrum master role to break down work items and schedule them for sprint delivery.
• DESIGN:
  • Requirements: Collaborate with stakeholders to design and document functional and non-functional requirements, ensuring clear and comprehensive specifications.
  • Solutioning: Conduct detailed technical analysis of business requirements, system specifications, and existing processes to identify solutions and improvements. Design and develop technical solutions, including data models, system integrations, and workflows including preparation of technical user stories.
• TEST:
  • Develop and execute test plans in SIT to validate technical solutions, ensuring they meet the specified requirements and function correctly.
  • Review UAT plan, test cases and coordinate with users and testing team on actual UAT execution and resolution of UAT defects. Ensure regression and sanity tests are performed for major deployments.
• BUILD: Manage clarifications of requirements and solution details with technical team to ensure that the build and testing phases are fully aligned with the requirements matrix.
• RELEASE: Assist the delivery manager in reviewing release notes and coordinating with IT Ops, business stakeholders and vendors/developers for the release to production and post live verifications.
• POST DELIVERY: Assist delivery manager in managing the resolution of production issues and working with the team on providing the root cause analysis and closing issues with business users

Requirements:

• Degree in Computer Science, Information Technology, or a related field.
• At least 5 years' experience in technical analysis, system design, and/or development
• Have led/facilitated business requirements and solutioning workshops with the business and technical teams and have prepared business, functional and technical specifications.
• Experience in designing solutions and creating high level designs of applications including interfaces, servers and workflows.
• Experience in client relationship management and/or project management in a technological context.

The following skills, knowledge and traits are preferred:

• Technical Skills:
  • Proficiency in programming languages (e.g., Java, C#, SQL), system integration tools, reporting tools and database management systems.
  • Working knowledge of SQL to form database queries for application support investigations.
• Analytical Skills: Strong analytical and problem-solving skills, with the ability to interpret complex technical information and develop effective solutions.
• Communication Skills: Able to communicate effectively across the organization including business and technology personnel. Excellent written and verbal communication skills, with the ability to explain technical concepts to non-technical stakeholders.
• Project Management: Experience with project management methodologies (e.g., Agile, Scrum) and tools.
• Tools and Technologies: Familiarity with business process mapping tools and software development tools and version control systems such as Agile DevOps routines and Microsoft Azure DevOps Tool.
• Attention to Detail: High level of accuracy and attention to detail in all aspects of technical analysis and documentation.
• Team Player: Ability to work collaboratively in a team environment and contribute to team success.
• Adaptability: Flexibility to adapt to changing business needs and technologies.
• Customer Focus: Strong customer service orientation with a focus on delivering value to the business.

The Technical Manager is responsible for all technical operational activities, managing the technical department as well as providing engineering & planning services for tender and support services to projects.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Overall responsible for all permanent and temporary works design and design optimization by managing the appointed consultant to ensure that project is delivered within budget
• Responsible for handling client and consultant, coordinate with consultants, client and authorities for design matters and submission.
• Oversee the shop drawings submission and issuance, planning and control delivery of design schedule, monitoring the progress
• Coordinate and support the construction and other departments within the project to fulfil design requirement
• Resolve all technical queries and submit/raise Request for Approval / Information (RFA/I) to concern parties to clarify any ambiguous design details
• Review technical specifications and proposals submitted by Consultants / Subcontractors / Suppliers and produce procurement specifications
• Adherence to safety practices in the work place

Value Add of Position

• Excellent client facing with strong people orientation ability to build and develop positive relations
• Possess strong skill in developing and delivering effective communication to different audiences
• Able to lead and inspire high performance, to ensure project plans are implemented on a timely, efficient and effective basis

Qualifications and Education Requirements

• Education: Degree in Civil Engineering from a recognised university endorsed by PE Board or qualification acceptable to the Commissioner of Building Control
• Experience: Minimum 8 years of engineering experience in delivering large scale projects

Job Description & Requirements

The Technical Manager is designated as the Design Manager of the LTA MRT project, in charge of design management of the project and managing the consultant and client’s expectation to deliver the project within budget.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Overall responsible for all permanent and temporary works design and design optimization by managing the appointed consultant to ensure that project is delivered within budget.
• Responsible for handling client and consultant, coordinate with consultants, client and authorities for design matters and submission.
• Oversee the shop drawings submission and issuance, planning and control delivery of design schedule, monitoring the progress.
• Coordinate and support the construction and other departments within the project to fulfil design requirement.
• Resolve all technical queries and submit/raise Request for Approval / Information (RFA/I) to concern parties to clarify any ambiguous design details.
• Review technical specifications and proposals submitted by Consultants / Subcontractors / Suppliers and produce procurement specifications.
• Adherence to safety practices in the workplace

Skills & Requirements

• Education: Degree in Civil Engineering from a recognized university endorsed by PE Board or qualification acceptable to the Commissioner of Building Control
• Experience: Minimum 12 years of engineering experience in delivering projects with at least 8 years of experience in design of civil and infrastructure project
• Extensive experience within a construction environment demonstrating accountability and ability to meet commitments through key internal stakeholders, clients, and staff at all levels.
• Technical Competencies: Technical expertise and knowledge in Structural, Architectural Design
• Proven track record of managing teams and delivering projects from start to hand-over

• Responsible to oversee the day-to-day planning, management, operations and safety of facilities management works and service with adequate administrative staff.
• Responsible to carry out systems' heath and obsolescence monitoring, obsolescence management, crisis management, fire safety management, investigation and carry out rooy cause analysis of the incident, not limited to accident, power outage, and systems failure.
• Shall be full-time on-site
• Contract period Jan’25 – Jun’25

What this job involves

Handling daily operations

Are you a pro in on-site operations management? In this role, you’ll assist the site managers in providing property management services and planning daily operational activities. Your role will have a focus on the building’s services and you’ll ensure that health, safety and environmental standards set out by the client/tenants are adhered to.

Likewise, you’ll be in charge of maintaining the building exterior and interior; as well as performing regular site inspections on all common areas—including public walkways, external façade and others—and implementing remedial action on any service issues.

Keeping clients satisfied

Enhancing client experience is second nature to us. As the person in charge, you’ll play a vital role in ensuring that clients are satisfied by providing excellent customer service and meeting their needs. You’ll also help build strong working relationships with the tenants by attending meetings as applicable. Furthermore, you’ll be the main point of contact with local authorities.

Sound like you? To apply you need to be:

Knowledgeable and experienced

An ideal candidate holds a NTC with minimum of 3 years of experience in mechanical trades of ACMV, Plumbing & Sanitary or market equivalent qualifications in facility management or building services works. Experience and ability in hands on operation in building, M&E services, basic trouble shooting of breakdowns / faults and performing service recovery is a necessity. It will be essential to be multi-trade trained and able to perform basic handyman works

Professional and efficient

Are you well-versed in both oral and written communication? Can you maintain professionalism and a can-do attitude in a fast-paced environment? Are you a technically-equipped expert with a strong background in conflict resolution? If you said yes to all these, then let’s work together and unlock your full potential.

What you can expect from us

At JLL, we make sure that you become the best version of yourself by helping you realise your full potential in an entrepreneurial and inclusive work environment. We will empower your ambitions through our dedicated Total Rewards Program, competitive pay and benefits package.

Apply today!

About the Role

We are seeking a Technical Programmer to join our innovative team. In this role, you will design, develop, and optimize cutting-edge software applications and solutions that drive business success. As a key player in our technical development team, you will collaborate with cross-functional teams to deliver high-quality, scalable, and maintainable software.

Responsibilities:

• Develop, test, and maintain software applications based on business requirements.
• Write clean, efficient, and well-documented code.
• Collaborate with cross-functional teams to design and implement innovative solutions.
• Debug and resolve technical issues to enhance application performance and reliability.
• Conduct code reviews and provide constructive feedback to team members.
• Stay updated on emerging technologies and best practices to continuously improve development processes.

Requirements:

• Bachelor’s degree in Computer Science, Software Engineering, or a related field.
• Proven experience in programming and software development (e.g., .NET, Java, Python, or other languages).
• Familiarity with web technologies, frameworks, and APIs.
• Strong understanding of data structures, algorithms, and software design principles.
• Excellent problem-solving skills and attention to detail.
• Ability to work independently and in a team-oriented, collaborative environment.

About AvePoint

Check out our careers blog for content on our people, culture, and workplace!

We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Responsibilities & Duties

· Interpretation of Architect’s design from concept design to construction details, ensuring compliance with code requirement

· Involved in the process of submission to various authorities for all stages of the project using Corenet X

· Co-ordinate drawing for compliance with planning and building requirements

· Maintain standard drafting and documentation templates

· Attend meeting with consultant and contractor

Requirements

1) Possess polytechnic or specialist diploma in Architectural Technology, BIM, or related field

2) At least 3 years’ experience in technical co-ordination of projects in the architectural field

3) Possess strong knowledge of authority requirements and construction details

4) Possess strong skillset in software for 2D and 3D drawing

5) Able to communicate at all organizational levels

Interested applicants, please submit application and resume to [email protected]

The Role:

Dow Jones is looking for a Technical Analyst to be part of the global Automation & Reporting team. The team uses SQL, Python, JavaScript and more to build solutions and robust reporting capabilities to help our partners manage and analyze high volumes of articles and data points across the Dow Jones products.

As a Technical Analyst within the team you will partner with multiple business teams to report on the databases they own and design innovative solutions to automate their business processes. You will work on multiple deliverables in parallel, be comfortable eliciting reporting requirements and translating these into solutions, prioritizing and communicating progress and blockers in an effective manner. You will report to the Director, Automation & Reporting.

You Will:

• Design, develop and maintain optimized solutions that meet reporting or process improvement needs.
• Manage a portfolio of solutions, work with multiple stakeholders and communicate progress and blockers with the project team and sponsors.
• Design and own reporting processes that are business centric and will improve the operational efficiency.
• Identify high impact business problems and elicit requirements for solution development.
• Write clean and readable code and optimized SQL queries.
• Develop ETL (Extract, Transform, Load) jobs, visualization dashboards and tools that support processes.
• Adopt existing best practices or contribute to improving them, including solution design, development, validation and documentation practices.
• Work on ad hoc and urgent requests

You Have

Essential Qualifications:

• Undergraduate degree, preferably in a quantitative field such as Computer Science, Data Science, Statistics, Mathematics, or related disciplines, or equivalent combination of training and 3+ years of experience in SQL and Python with applications for data analysis and data processing.
• Excellent communication skills, being able to communicate technical information clearly to both technical and non-technical audiences
• Self starter able to work independently, coordinate with multiple partners and complete projects start to finish
• Detail oriented with focus on assuring quality, consistency and accuracy in data and processes
• Experience in working with version control systems like Git.
• Experience in delivery through agile practices
• An openness to different views and opinions and an appreciation for team diversity

Preferred Qualifications:

• Experience in ETL development.
• Experience working with large datasets in a fast-paced and fluid environment with the ability to understand and solve complex non-routine problems.
• Experience in working with Google APIs.
• Experience in using AI tools (Copilot, ChatGPT).
• Proficiency in data visualization and dashboard building.
• Experience with cloud services (AWS, GCP) including S3, Athena, Glue.
• Knowledge in Data Science and predictive modeling.
• Knowledge of other programming languages (JavaScript).

• Operate, maintain, and repair cooling systems, including chillers and related components.
• Carry out preventive maintenance for client's properties and attend to all work orders issued by management
• Monitor system performance, conduct regular inspections, and perform preventive maintenance to ensure optimal efficiency and reliability.
• Ensure compliance with safety rules and regulations
• To assist the departments in all aspects pertaining to electrical, ACMV engineering work to installations
• Effective communication skills to work collaboratively within a team and communicate with clients and management.
• Preferably with Class 3 Driving licence

• Ensuring Safety of the vessel and her crew always as a top priority.
• Manage technical requirements and operation of Offshore vessels such as DP2, DP3 Subsea Dive Support (DSV), PSV, AHTS, and other assets.
• Monitoring technical costs of managed vessels and ensuring follow-up of cost control with vessels Master and Chief Engineer.
• Monitoring of vessel visitations to ensure that vessels are inspected regularly.
• Ensuring that internal and external audit observations are agreed to and closed out within the agreed schedule.
• Developing programmes for continuous improvement and to ensure that Technical Management staff and the Vessel Engineers are kept aware of new or changing regulations and industry initiatives.
• Project Management, Plan, manage, monitor, and execute vessels repairs, dry docking, and conversions within agreed budgets.
• PIC for any client’s surveys, inspections including OVID, MWS, and coordinate with relevant departments to close out the findings in the punch list before mobilization.
• Responsible for preparing project execution plan, planning and schedules, project operations, reviewing and providing engineering and operational support during offshore operations.
• Work in partnership with HSE, Crewing and Marine colleagues towards OVMSA / TMSA compliance, Company Policies as well as related campaigns and initiatives.
• Manage the interface with the clients, intermediaries, ship owners and other stakeholders involved, ensuring active involvement, timely responses with a broader overview of actions, and its consequences.
• Manage vessel’s Class and certification requirements, inclusive of the renewal of certificates & support for vessel’s Flag and Class requirements.
• Ensure reporting monthly to clients on plans ahead for each vessel as well as review of monthly costs, monthly reports, PMS data etc. being communicated from the vessels, accordingly, prepare reports for the MD for his review.
• Approving orders, invoices, and payments up to limit of authorisation.
• Responsible for implementing and maintaining a safe, cost efficient and environmentally sound operation standard in compliance with the Company’s Quality Management System as well as the International Marine regulations, IMCA, and the vessels’ classification.
• Work with all teams for tender bids, submissions etc. as well as operating cost forecast.
• Support the team on emergency responses, clients interface, and with Incident accident investigations, High Potential Near Misses and Technical incidents.
• To maintain a high-quality technical and marine operations consistent with the Offshore Industry standards and guidelines.
• Additional works and tasks as advised by the Managing Director.

Requirements and Exeperience (Essential skills, qualifications, and experience):

• Previous experience in a Shipping and offshore marine operations related company is a must, preferably within a Ship Management organization.
• Prior experience either as a Technical Superintendent or a Vessel Manager for a minimum of 3 to 5 years managing offshore oil and gas assets such as Subsea, Offshore Construction, and OSVs. Having also interfaced or managed conventional vessels would be an added advantage.
• Having sailed as a Marine Engineering officer on offshore or conventional vessels, and should hold a MEO Class 1 or Class II Certificate of Competency as a minimum.
• Recognised marine qualification/experience either at sea or university or shore-based experience would be essential.
• Ability to communicate openly, efficiently, and effectively.

Responsibility:

• Overseeing projects and monitoring activities at worksites.
• Managing workers and ensuring adherence to safety standards.
• Coordinating tasks and scheduling.
• Liaising with clients and vendors.
• To prepare jobsheets for timely submission
• To handle any other assignments, eg. ad-hoc duties

Requirement

• Diploma Civil Engineering / Engineering
• Minimum 5 years of relevant experience in the construction sector
• Possess Valid Class 3 Driving license
• Only Singaporean or PR

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Life Science Medical Devices
• Possess own transport

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Role: L1 Technical Support

Work Location: Woodlands/Yishun/Bendemere

Monthly Salary Budget: $2,000 to $2,500

Domain: Healthcare

Job Description:

ARC Tier 1 is required to work in a secure ARC environment. ARC is a type of call center that specializes in providing technical support or customer service for complex products or services. They may also use advanced technologies such as artificial intelligence, chatbots, and automation to assist with customer inquiries and support.

In addition to providing technical support, an ARC may also be responsible for proactive monitoring and management of the product or service being supported, identifying, and resolving issues before they become problems for customers. This can help to improve overall customer satisfaction and reduce downtime for critical systems or services.

Overall, an Advanced Response Center plays a critical role in ensuring that customers receive high-quality technical support and service for complex products and services.

ARC Tier 1 is responsible for provide first level technical support to customers. ARC Tier 1 will work closely with ARC Tier 2, TeamLeads & Technical Support Engineers to achieve this purpose. ARC Tier 1 is the first line of technical support. This team is responsible for basic customer issues/enquiries/request/alert. It is the same as 1st Level support which provide basic technical or non- technical support functions.

ACR Tier 1 functions and responsibilities (not limited)

• Respond to the incoming enquiries/incident/request/alerts (Call, Email, Webchat, EUP, IVR handling, Monitoring consoles)
• 1st level troubleshooting of in supported systems i.e. Workplace; Server; Network; Microsoft 365; Secure Access Service Edge; Point of Sale
• Security event monitoring
• Server and network availability and performance monitoring
• Password reset and unlock
• Perform log & route [to higher tier or Resolver Team(s)]
• Record and manage all transactions/ cases in Service Management System
• Broadcast notifications to the relevant parties
• Provide timely status update, follow up on cases escalated until closure within the service level agreement. Ensure daily tasks are executed according to the Standard Operation Procedure

• Manage day-to-day technical operations, including attending daily toolbox meetings, compliance with WSHA.
• Respond to emergency fault calls during office hours/standby duties after office hours in rotating duty roster and ensure timely rectification of issues.
• Liase with users and authority to prepare and submit detailed work proposals for job requests.
• Prepare costing, condition assessment, and proposal for maintenance works.
• Responsible for inventory record, drawings, documentations and defect liability period registers.
• Compile and maintain service reports, licenses/certificates on site.
• Prepare and submit certificate of completion for maintenance works and services monthly, and prepare monthly claims.
• Supervise and follow up with sub-contractors to carry out corrective maintenance/adhoc works and to rectify defects reported by quality control/auality, assurance, auditor/users.
• Check and certify works done by sub-contractors.
• Perform any other technical tasks as and when required.

Office Location: Punggol Digital District

Inspect and do corrective action on the equipment

~ Preventive mantenance on all the equipment in the shop

~ Updating of preventive maintenance record (eg: checklist history card)

~ Minimize break down and down time of the equipment by problem identification

~ Installation of new equipment

~ Inspection for reliable operation

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Medical Imaging Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Medical Non-Imaging Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De