• Managing quotation requests, generating quotes in ERP, and forwarding quotes to clients.
• To assign project numbers, view work files, execute orders, and create job numbers.
• After receiving confirmation of the client's request, coordinate with the internal department to carry it out.
• Email correspondence and communication with the client regarding delivery instructions and readiness
• Delivery orders are issued, and SCM is contacted for pickup and delivery.
• Time management and coordination skills are essential for any task that the business manager or sales manager assigns.
• Creating shipment documentation and communicating with a shipping/forwarding company in order to export goods
• Send purchase requisition forms (PRs) to the supply chain division so that the supplier can receive a purchase order.
• Verify the supplier's invoice for payment, close the necessary job files that were anticipated for the month, and print the quotation and job costing sheet for the sales manager to evaluate.
• Make sure all vendor invoices are filed in job files and submitted for payment processing.
• Maintain a record of every project milestone and send the appropriate invoice to the client.
• Prior to the actual billing invoice being sent to the customer, the drafting specification of the invoice must be prepared with all required printouts, such as the quotation, customer purchase order, email confirmation, onsite timesheet, and general expenses, for the sales manager and business manager to review and approve.

Role:

• Assist the Senior Technical Manager in overseeing the technical operations of a fleet of tankers.
• Manage daily maintenance and repair activities, budget survey schedules, and docking operations.
• Maintain updated records of class status and coordinate with Classification Societies, Suppliers, and Contractors for daily operations.
• Ensure adherence to statutory requirements under ISM, ISPS, and MLC.
• Monitor, coordinate, and attend vessel inspections by oil majors, statutory surveys, and follow up on related matters.
• Conduct and report on incident/accident investigations.

Requirements:

• Sea-going experience as a Marine Engineer and atleast 2 years of shore experience as technical superintendent or fleet manager.
• MOT Engineer Certification (Class 1).
• Strong organizational skills with a hands-on approach to technical troubleshooting and problem-solving.
• Independent, resourceful, and able to work under pressure to meet deadlines.
• Willingness and ability to travel on short notice as needed.

Role:

• Ensure vessels meet required technical standards and performance levels.
• Systematically update and store vessels’ certificates and documents.
• Implement the Company’s planned maintenance system effectively.
• Prepare, arrange, and manage class, statutory, and other vessel surveys.
• Prepare, manage, and monitor dry-dockings and other necessary repairs and maintenance.
• Review and enhance crew performance on vessels.
• Prepare and manage the technical budget for vessels.
• Perform other assigned tasks as needed.

Requirements:

• Tanker seagoing experience as a Chief Engineer or Second Engineer (minimum COC Class 2 or 3), or at least 2 years of experience as a technical superintendent for oil tankers and bunker tankers.
• Strong integrity and professionalism.
• Excellent leadership, teamwork, management, and communication skills.
• Proficient in spoken and written communication.

Our client, a shipping company, is on a lookout for a Technical Superintendent (Bulk) to join their team!

Responsibilities:

• Manage all aspects of technical maintenance, budget control, planning and all safety aspects of the vessels
• Manage ship maintenance plans
• Ensure vessels comply to the statutory regulations for safety
• Organize, monitor and execute all activities connected to class and flag state and certificate requirements.
• Monitor vessels performance and implement timely remedial actions when required
• Responsible for controlling the budgets for assigned vessels

Requirements:

• Minimum Diploma and above in Maritime Studies or an relevant discipline
• Preferably minimum 2 of experience as a Technical Superintendent (Bulk)
• COC Class 1 Certified
• Must have sailed as a Chief Engineer on Bulk vessels

Responsibilities:

• Analyse project/business needs and necessary technical requirements, activities and employees, monitor planning continuously and take corrective measures if necessary.
• Coordinate the different technical activities (conceptual design, built, mobilisation, commission, maintenance and repair) in own focus area.
• Prepare and request budget for technical activities (based on detailed specifications), manage actuals and present views.
• Ensure conceptual, basic and detailed design is executed according to needs defined and in accordance with compliance regulations.
• Ensure new technical asset gets into operation, by commissioning the individual assets and ensuring total compliance with specifications.
• Organise permanent maintenance, carry out repairs of technical assets, prepare repair specifications, organise and ensure follow-up of execution, coordinate and support (ongoing and planned) maintenance, repairs and investment projects, take corrective measures if necessary.
• Ensure safe and efficient deployment of people and equipment during repairs, docking and investment projects, analyse incidents and make and implement suggestions for the improvement of QHSE-S (Management System).
• Have relevant expertise in the technical field, keep up with relevant developments in the own area and related areas of expertise and contribute to the (technical) field by developing new, state of the art knowledge and exchanging knowledge with colleagues.
• Ensure reporting on the progress and results of the performance/maintenance/repair investment projects, ensure technical administration, propose suggestions for improvement.

Requirements:

• Relevant tertiary qualifications/Bachelor/Diploma/Master in Engineering or a related technical discipline (or equivalent knowledge and experience)
• With minimum 10 years of work experience in the same industry
• Possess high HSE DNA skills as to drive and lead HSE performance on site
• Have contractual knowledge as to negotiate and implement contracts / subcontracts
• Have high people skills as to lead a versatile, multinational team of staff and crew
• Be fully skilled in Microsoft office software as to lead meetings and presentations with Clients
• Be fully proficient in English language (reading / writing / speaking)

Job Title: Construction Technical Consultant (TC)
Location: Singapore
Vacancies: 1
Salary Range: SGD 5000-7000/month
Working Hours: 5-day work week

Requirements:

• Minimum of three years of relevant work experience in the construction industry.
• Knowledge and practical experience in technical consultancy, with the ability to provide professional technical support for projects.
• Excellent communication skills to effectively interact with clients, teams, and project stakeholders.
• Minimum of a bachelor's degree in Civil Engineering or a related field.

Responsibilities:

• Provide technical guidance and advice for construction projects.
• Assist the project team in resolving technical issues during construction.
• Review and evaluate design and construction plans to ensure technical feasibility.
• Offer technical solutions to optimize project plans, improving quality and efficiency.
• Participate in technical reviews and quality control to ensure compliance with relevant regulations and standards.
• Communicate with project managers, designers, engineers, and clients to provide technical support.

Benefits:

• Medical insurance
• Paid annual leave
• Year-end bonus

How to Apply:
Interested candidates, please send your resume to [email protected], and indicate the position applied for in the subject line.

职位名称： 建筑技术咨询师（TC）
工作地点： 新加坡
招聘人数： 1人
薪资范围： SGD 5000-7000/月
工作时间： 5天制
要求条件：

1. 至少三年建筑行业相关工作经验。
2. 具备技术咨询相关知识和实践经验，能够为项目提供专业技术支持。
3. 优秀的沟通能力，能够与客户、团队和项目相关方有效互动。
4. 要求最低本科学历，土木工程相关专业

岗位职责：

1. 提供建筑项目相关的技术指导和建议。
2. 协助项目团队解决施工中的技术问题。
3. 审查和评估设计和施工方案，确保其技术可行性。
4. 为项目提供技术方案优化，帮助提升工程质量和效率。
5. 参与技术审查和质量控制，确保符合相关的法规和标准。
6. 与项目经理、设计师、工程师及客户沟通，提供技术支持。

福利待遇：

• 医疗保险
• 带薪年假
• 年终奖金

申请方式：
有意者请将简历发送至 [email protected]，并注明申请职位。

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structure, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

- Possess a valid RTO (Tunnel) cert by JAC of IES/ACES as QSS Singapore

Responsibilities:

Shipbuilding Planning and Preparation

• Confirmation of construction schedule, detailed drawings, and specifications. Participation in regular meetings with shipowners, shipyards, designers, and other relevant parties.

Shipbuilding Quality control

• Verify that materials and parts used conform to specifications. Checking the progress and quality of each construction process to ensure proper quality. Perform inspections, Nondestructive testing (NDT), welding inspections, painting inspections, etc. Observe and confirm various tests (buoyancy tests, pressure tests, functional tests, etc.).

Shipbuilding Design supervision

• Check and approve blueprints and change drawings. Handling of review and approval of design changes that occur during construction.

Shipbuilding Safety management

• Planning HSSE management. Patrols and Ensures compliance with safety standards within the shipyard.
• Reporting and handling of safety issues and incidents.

Shipbuilding Process control

• Monitoring the progress of construction according to the schedule. Responding to and coordinating schedule changes and delays.

Shipbuilding Reporting and Recording

• Reports to head office about progress, problems, budget etc. Preservation of important records such as inspection results and test results.

Communication and coordination

• Liaison and coordination with shipyards, designers, shipowners, standards bodies, etc.
• Prompt response and resolution of problems and issues that arise.

Compliance with laws, regulations and standards

• Verification of compliance with the International Maritime Organization (IMO), Classification Society (Class), Japanese law and regulations and other standards and laws. Management of inspections and witnessing by standards bodies.

Shipbuilding Final verification and handover

• Completion inspection and verification during the final process. Confirmation of final trials such as sea trials. Witnessing and confirmation of the final handover of the vessel.

Preparation for cable laying work after delivery

• Order and load the materials and equipment needed for the cable laying work. Planning the suitable crew rotation schedule and the operation schedule. Cable installation project planning support.

Defect warranty

• When a machine problem occurs, troubleshoot to identify the cause and resolve it after delivery.
• Negotiate compensation with the shipyard in the event of a problem occurring and maintain the ship in a sound condition.

Cable laying Project Operation and Vessel Maintenance

• Quickly identify the cause of mechanical or electrical troubles in the working vessels andestablish a proper restore/repair plan. Take precautions to prevent troubles on working vessels. Handle operational issues, repairs, and/or modifications to Cable laying Vessel fleet.
• Liaise and coordinate with various stakeholders, Vessel master’s shipyard and vendors to schedule repairs and maintenance needed for the operations.
• Prepare proposals for docking requirements and specifications. Check and ensure that spare parts inventory management and condition are sufficient to support repair and maintenance schedules.
• Ensure quality, environment, health & safety requirements are met.

Requirements:

• Minimum 4 years of higher education in mechanical and/or naval engineering.
• Minimum 2 years of experience with ship hull design and outfitting design in shipyards.
• Experience in building six or more new ships at a shipyard.
• Experience in large civil construction project sites over SGD120M in General Civil works
• Experience in large marine construction project sites over SGD100M in Marine construction works
• Well-versed in ship maintenance requirements.
• Good knowledge of ship engineering, structural mechanics, marine engineering, and marine equipment
• Positive working attitude and ability to work in a fast-paced environment.
• Positive troubleshooting/finding root causes with shipyard engineers and workers
• during the project period.

Responsibilities:

• Keep abreast of progress and provide instructions to ensure work is carried out as planned.
• Able to manage budgets and procure and manage materials and equipment appropriately.
• To formulate plans, check progress and control quality.
• To check Ship design drawings and technical specifications
• Confirm compliance with IMO, classification society (ClassNK) and inspections stipulated by the Japanese government (JG) and comply with technical standards.
• Able to prepare progress reports and reports to head office.
• Maintain appropriate technical drawings, specifications, and reports.
• Identifying and resolving problems occurring in the field and proposing improvements to increase efficiency and quality.
• Facilitate coordination with relevant parties (shipyards, classification societies, manufacturers, etc.) to ensure smooth operations.
• Manage work teams, liaise with other departments, and coordinate effectively with clients.
• Communicate and cooperate with shipyard personnel and ship's crew, and able to identify root causes and suggest appropriate countermeasures in resolving problems.

Requirements:

• Minimum 12 years of ship maintenance management experience with a degree in Mechanical Engineering or a recognised degree in the relevant field subject to the acceptance of the engineer.
• Proven track record in the ship of maintenance management

⮚ Jack-up Vessel

⮚ Cutter Suction Dredger

⮚ Trailing Suction Hopper Dredger

⮚ Anchor Handling Vessel

• Experience in large size of dredging & reclamation project sites over SGD 500M
• Experience in design, calculation, planning and modification of ships and ships equipment.

⮚ Jack-up Vessel

⮚ Cutter Suction Dredger

⮚ Trailing Suction Hopper Dredger

⮚ Anchor Handling Vessel

• Good knowledge of marine engineering and structural mechanics
• Experience in planning large-size crane equipment.
• Good knowledge of the ClassNK survey
• Well-versed in ship maintenance requirements
• Good written and interpersonal skills
• Positive working attitude and ability to work in a fast-paced environment.
• Positive troubleshooting / finding the root cause.

Responsibilities:

• Supervise that the ship is built according to specifications and approved plans
• Supervise that the ship is built for compliance with relevant IMO regulations, Rules and Regulations for the Classification and Regulations flag country
• Review technical and building specifications and plans for shipbuilding
• Quickly identify the cause of troubles that occurred during shipbuilding and establish proper solutions
• Take precautions to prevent troubles during shipbuilding
• Liaise and coordinate with various stakeholders, shipyard, designer, vendors, Classification society, and flag country for technical and procedural issues during shipbuilding
• Ensure quality, environment, health & safety requirements are met

Requirements:

• Master's degree in Naval Architecture and Ocean Engineering
• Minimum fifteen(15) years of experience in either of four(4) major IACS Classification Society, ABS, Class NK, DNV or LR
• Proficiency in plan approval for hull structure in new construction projects of merchant ships the length of which is more than 200 metres (more than ten(10) different designs)
• Experience in plan approval for Zero-emission related works, such as; Carbon Capture and Storage system and Alternative fuel
• Experience in design review for novel design of hull structures, such as; Unusual hull form, proportion and structural arrangement
• Experience in structural strength assessment for sloshing in large tanks, such as; Cargo tanks (GTT MK III membrane system) of LNG tanker
• Experience in management as a member of the leadership team of the Classification Society in any country.
• Good knowledge of Rules and Regulations for Classification of Ship, IMO International conventions and codes etc. with experience in the development and maintenance of the Rules
• Good knowledge of innovative technology in the marine industry, such as; Wind-Assisted Propulsion System
• Positive working attitude and ability to work in a fast-paced environment
• Positive troubleshooting/finding root cause during shipbuilding

Responsibilities:

• Ensure that the vessel's machinery and systems are properly maintained and serviced, following planned maintenance schedules.
• Ensure compliance with international and local regulations, including SOLAS, MARPOL, and other relevant standards.
• Implement and enforce safety management systems, conducting regular safety audits and risk assessments.
• Facilitate training programs for crew members on equipment operation, safety procedures, and emergency protocols.
• Prepare and manage budgets for maintenance, repairs, and operational expenditures, ensuring cost-effectiveness.
• Investigate any accidents, incidents, or near misses, and implement corrective actions to prevent recurrence.
• Provide technical assistance and advice to the ship’s crew regarding machinery issues and operational challenges.
• Oversee the inventory of spare parts, tools, and consumables, ensuring adequate stock levels for maintenance and repairs.
• Monitor vessel performance data, such as fuel consumption and operational efficiency, to identify areas for improvement.
• Act as a liaison with flag state authorities, classification societies, and service providers for inspections, repairs, and compliance matters.

Requirements:

• Tanker seagoing experience as a Chief Engineer or Second Engineer (at least COC Class 2 or 3), or at least 2 years of experience as technical superintendent for oil tankers and bunker tankers.
• Strong sense of integrity and professionalism.
• Excellent leadership, teamwork, management and communication skills.

Queenie Chua

R24125459

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

About the role

McConnell Dowell seeks an experienced RTO for one of our major infrastructure projects in Singapore.

Key Responsibilities

• Inspection and supervision of Archi work, including but not limited to ALC wall & drywall, off-site precast toilet units, off-site precast façade panels factory, epoxy flooring, vinyl flooring, carpet flooring, plastering, painting, raised floor system, ceiling, screeding, tiling, waterproofing, room handover, defects, auto-door testing, lift interior, & resolving conflicts between Architectural, Structural & M&E works.
• Inspect and conduct all required tests for the project.
• Preparation & issuance of site memos on bad workmanship & non-compliant works.
• As-built drawings checks.
• Highlight safety issues as & when observed.
• Attend and witness all on-site testing of architectural works as required by the Client and authorities.
• Check that all architectural works are carried out according to the approved drawings and specifications and conform to all authority standards and requirements.
• Inspect the completed works and record all defects for rectification before handing them over to the Client.

About You

To be considered for this role, you will have;

• Diploma in a relevant field and a minimum of 8 years of architectural experience, along with at least 5 years of experience in supervising construction for projects of similar scale and complexity in a local context.
• Has good working knowledge of Architectural and Interior Design finishing works and compliance with local Building Regulations.
• Prefer to have LTA MRT project experience.
• Able to work alt sat work week.

If you are interested in adding value and contributing success to building a key infrastructure project, we encourage you to apply for this exciting opportunity with McConnell Dowell.

About Us

McConnell Dowell – Creative Construction

Our purpose is Providing a Better Life. We do that through delivering projects that connect, support and sustain communities, and through providing career opportunities that challenge, reward and grow our people.

From remote major resources and energy projects to city-shaping transport and water infrastructure, we have constructed thousands of high-quality, complex projects for our customers and communities over more than 60 years, in Australia, New Zealand, the Pacific Islands and Southeast Asia.

Why join us?

The work you’ll do will have a tangible positive impact on people’s lives, including yours. The diversity of our projects, roles and locations means greater development opportunities. We invest in our people to set and reach personal and professional goals and we have some of the best mentoring minds in the business to help you do that. Because when you grow, we all grow.

McConnell Dowell actively seeks and celebrates diversity, inclusion, and individuality. In a culture low on ego and high on support, we encourage everyone to make an impact. We're big enough to take on community-shaping projects, but agile enough for you to have an influence on how we do things.

So, join us, be you, and help us create better together. Apply now!

This role is being sourced through McConnell Dowell directly and not accepting applications via external recruitment agencies.

Domain: Banking (Must) / Location: North, Singapore

1. The contact point for users and work with Functional BA to identify the root cause and provide solutions.

2. To perform analysis of production defects / findings to identify root cause.

3. To identify and propose workarounds and solutions for production issues.

4. To analyse the requirements and identify the technical solutions for Avaloq functional changes.

5. To prepare the FSD and TSD, where applicable.

6. To walk through the solutions with users to confirm that they are as per the requirements.

7. To perform parameterization, unit testing and SIT, where applicable.

8. To understand the various batch jobs, purposes and the underlying functionalities.

9. To provide Avaloq technical solutions for issues relating to performance of the system.

10. To perform audit of codes delivered by the other team members or vendor resources.

11. In-charge of support of the newly delivered Avaloq Web Banking and developments required by business consumption for Avaloq Web Banking (CAPI/AMI/Micro services).

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Job Description & Requirements

• To carry out full-time supervision of construction works as required under BCA regulations and in accordance with the contract and Superintending Officer’s instructions.
• To monitor progress and ensure that the work is done and materials used are in accordance with approved specifications, codes, standards, and regulations.
• Assume any other duties in connection with the project assigned by the S.O.
• Supervise any works in compliance with contract requirements.

Requirements:

• Diploma in Civil & Structural Engineering or equivalent
• Min.10 years of experience in LTA projects
• Registered RTO with IES/ACES

Job scope and responsibilities

1. To carry out structural and civil works inspection progressively and proactively

2. Able to spot safety infringement or near misses on site and report to safety team on time

3. Experienced in structural steel inspection

4. Must be able to read and interpret structural plans and details

5. Willing to work night shift

6. A team player and possess good technical knowledges in structural concrrete and post-tensioning works

7. Able to draft simple daily reports, progress report and inspection reports.

Requirements:

• Registered RTO with valid certificate issued by BCA/ JAC (IES-ACES)
• Degree/diploma with specialization in a relevant technical field.
• At least 5 years of working experience on site

• Plan technical deliverables (including any system enhancements and upgrades) to meet project’s requirements within allocated budget and schedule.
• Plan & collaborate across different application teams to manage technical dependencies of the solution
• Plan, monitor and manage risks/issues related to technical delivery
• Provide status update related to technical delivery / Program Manager
• Partner with Development Manager in managing application teams to build the enhancements
• Partner with Test Manager to ensure completion of System Integration Testing (SIT), User Acceptance Testing (UAT), performance / load testing and application security testing with quality results
• Prepare and manage technical implementation plan across application teams - coordinate technical implementation activities across application teams to ensure non-event production cutover and adequate post implementation support
• Escalate issues that impacts project schedule on timely basis and propose workarounds/resolutions
• Experience in service-oriented technologies
• Good understanding and experience in software development cycle (Waterfall/Agile best practices)
• Good problem solving, analytical, synthesis, system thinking and solutioning skills
• Strong negotiation skills and vendor management skills

Job Description

• Industry/ Organization Type: Manufacturing (O&G)
• Position Title: Technical Sales Engineer
• Working Location: Redhill
• Working Hours: 5 days (Monday to Thursday 8.30 AM – 6 PM, Friday 8.30 AM – 5 PM)
• Salary Package: Basic Salary up to $6,000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Develop and grow key accounts in the Oil & Gas or Petrochemical sector.
• Establish and maintain business relationships with target customers to secure sales.
• Cultivate a comprehensive understanding of the customer’s operations and objectives.
• Develop and adhere to optimum profit margins and pricing points.
• Monitor assigned accounts - including progress, customer requests, competitor activity, and execution updates.
• Collate forecasts and reports for each key product/service offering assigned.
• Plan and negotiate long-term contracts with key account customers.
• Present and close sales opportunities to executives at major oil companies.
• Continually push company’s product/services to existing customers.
• Coordinate site work and discuss technical requirements on-site with customers.
• Review customer requests and provide technical solutions.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent.
• Has 3 years of working experience in downstream oil and gas/petrochemical industry preferred.
• Prior experience in flange management is advantageous.
• Proficiency with CAD tools such as Solidworks and AutoCAD is an advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69726 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Roles & Responsibilities:

- Provide support to the superintendent in the planning, execution, and finalization of dry dock and repair projects, and attend the project site as required.

- Assist the superintendent with the preparation of the OPEX budget.

- Coordinate and arrange service engineers for boarding operations.

- Review, update, and prepare vessel shareholder presentations for timely submission.

- Maintain records of fleet service arrangements and End of Month (EOM) reports, including technical bulletins from manufacturers.

- Prepare and complete monthly post-meeting reports for Charterers/Fleet.

- Administer the disbursement account, ensuring line items and account codes are accurately detailed.

- Review Management Meeting minutes and provide a summary to the superintendent.

- Distribute monthly Class status reports to vessels, including details on expiring certificates.

- Assist with tasks related to EU ETS, EUMRV, and IMO DCS compliance.

- Support the review and processing of PAL occurrences as guided by the Fleet Manager, and help the superintendent close occurrences using Tableau data.

- Appoint Agents following the superintendent's instructions.

- Handle any other required documentation and filing tasks as assigned by the team.

- Assist the superintendent with Guarantee claims management.

- Support both internal and external Survey and Audit Requirements.

- Monitor and report progress on the Teams' "Management of Change" initiatives.

- Review and manage fleet weekly operational data and monthly KPIs, ensuring that the fleet team stays informed.

- Create and finalize presentations for Charterers/Owners as needed by the Fleet team.

Requirements:

- Bachelor’s Degree (preferably in ship management, maritime operations, or a related science discipline).

- Training in Secretarial skills.

- Excellent written and verbal communication abilities.

- Motivated to thrive in a dynamic, challenging, and results-oriented environment.

- Fresh Graduates are encouraged to apply!

Responsibilities

• Broad experience in designing, programming, and implementing large distributed systems with microservices.
• Deep understanding of Application, Infrastructure and security architecture and non-functional aspects like Performance, Scalability, Reliability, Availability etc.
• Translate functional requirements to design.
• Work with technical SMEs to understand their requirements and ensure these are met.
• Define best practices and standards for the microservice implementation.
• Identify and define implementation patterns.
• Lead activities to build accelerators and tools to increase the quality of deliverables.
• Evaluates industry technologies to shape design of services in consideration of cost, portability, compatibility, or usability factors.
• Identifies and makes appropriate changes to technologies, integrated platforms, and systems to meet customer and operational requirements.
• Continuously seeks to more efficiently manage and utilize technology, platforms, and systems.
• Highlights design risks, provide alternative options and recommend quality solution to specified problem.

Essential Requirements (Skills Requirements)

• Bachelor’s degree in Computer Science.
• 10+ years of technical experience within architecture development, integration of backend systems and development.
• Strong Hands–on experience in developing applications using Java/J2EE, with Spring boot framework knowledge and experience.
• Deep knowledge of SOA, Architecture and Design on Microservices, REST Services and Soap Services Development.
• Experience in core java fundamentals, Java 8+, Spring, Springboot, testing framework Junit, Cucumber.
• Strong hands-on with design patterns, clean code.
• Strong hands-on in Java Microservices (Springboot) Restful APIs and Soap Services.
• Experience in designing and coding scalable Microservices.
• Experience with middleware/messaging technologies such as MQ, JMS, Kafka and exposure to event-driven design patterns.
• Experience in Spring Cloud.
• Experience in Azure Kubernetes Service(AKS).
• Experience in configuring and implementing Azure Open Service Mesh for Pod to Pod communication.
• Experience in API Management using Azure API Gateway(APIM).
• Experience in writing deployment pipelines to deploy Java microservices in Kubernetes.
• Strong in creating/ defining Swagger specs for REST APIs, understand REST principles, Guidelines.
• Demonstrated knowledge of OAuth token-based authentication protocol.
• Demonstrated knowledge of PCI and Security Coding Standards.
• Experience with MSSQL, data modelling, query development and performance optimization.

GOOD TO HAVE

• Experience in migrating TIBCO services to spring boot microservices.
• Experience in gaming and Hospitality industry would be an advantage.

Technical / Professional Skills

• Spring Boot, Java/J2EE,SOA,REST and Soap Services, Microservices.

Non-Technical / Soft Skills

• Problem solving skills and ability to work under pressure.
• Good command of English, both written and spoken.

Job Responsibilities:

• Ensure vessel certificates are up-to-date and maintain e-documents within the system.
• Assist the Technical Superintendent or Manager in the preparation, monitoring, and control of repair and maintenance budgets for the fleet.
• Support the Technical Superintendent/Manager with the quotation and requisition processes for services and stores.
• Contribute to the creation of technical specifications for dockings and related operations.
• Review and follow up on Planned Maintenance System (PMS) reports from vessels.
• Oversee the tracking and submission of month-end reports from vessels.
• Carry out other ad-hoc tasks as assigned by the Technical Superintendent/Manager.

Job Requirements:

• Diploma/ITE in Marine Engineering or a relevant field (preference for Maritime or engineering majors).
• Excellent communication and interpersonal abilities.
• Proficient in MS Office software.
• Able to work independently.
• Ability to complete tasks within set deadlines.
• Effective team player.

Job Purpose

The Heavy Automobile Technical Specialist will be responsible for carrying out panel beating, spray painting, livery and supportive roles in the workshop.

Duties and Responsibilities

· Panel beating of damage surface, paint preparation, spray painting of heavy vehicles such as 12m buses, trucks, engineering plant and any surface requires spray painting by the supervisor and management.

· Attach livery decals on vehicles surfaces.

· Support for operations such as items removal, installation, fabrication and repairs.

· Attend to ad hoc job by management.

· Responsible for personal safety and work in a safe manner in workplace.

Qualifications and Work Experience

· Experienced in surface preparations and paint preparations (mixing and thinning).

· Technical institute in Automotive or equivalent.

· Min. 5 years of experience in heavy vehicle body works.

Skills and Competencies

· Good hands-on skills.

· Good discipline in carrying out assigned task responsibly and on-time.

· Self-motivated, good working attitude and co-operative.

· Willing to perform over-time as and when required to churn out vehicle on-time.Job Purpose

The Heavy Automobile Technical Specialist will be responsible for carrying out panel beating, spray painting, livery and supportive roles in the workshop.

Duties and Responsibilities

· Panel beating of damage surface, paint preparation, spray painting of heavy vehicles such as 12m buses, trucks, engineering plant and any surface requires spray painting by the supervisor and management.

· Attach livery decals on vehicles surfaces.

· Support for operations such as items removal, installation, fabrication and repairs.

· Attend to ad hoc job by management.

· Responsible for personal safety and work in a safe manner in workplace.

Qualifications and Work Experience

· Experienced in surface preparations and paint preparations (mixing and thinning).

· Technical institute in Automotive (fresh graduates are welcome to apply).

· Min. 5 years of experience in heavy vehicle body workshop for interested parties without formal technical education.

Skills and Competencies

· Good hands-on skills.

· Good discipline in carrying out assigned task responsibly and on-time.

· Self-motivated, good working attitude and co-operative.

· Willing to perform over-time as and when required to churn out vehicle on-time.

• Inspection and supervision of Archi work.
• Inspect and conduct all required tests for the project.
• Preparation & issuance of site memos on bad workmanship & non-compliant works.
• As-built drawings checks.
• Highlight safety issues as & when observed.
• Attend and witness all on-site testing of architectural works as required by the Client and authorities.
• Check that all architectural works are carried out according to the approved drawings and specifications and conform to all authority standards and requirements.
• Inspect the completed works and record all defects for rectification before handing them over to the Client.

Qualification

• Diploma in a relevant field and a minimum of 8 years of architectural experience, along with at least 5 years of experience in supervising construction for projects of similar scale and complexity in a local context.
• Has good working knowledge of Architectural and Interior Design finishing works and compliance with local Building Regulations.
• Prefer to have LTA MRT project experience.

We are seeking a skilled Technical Business Analyst with atleast 6-8 years of work experience to join our MedTech project. This is a 8 months contract to start with.

The ideal candidate will bridge the gap between technical teams and business stakeholders, ensuring the successful implementation of technology solutions that drive innovation in the medical technology space.

Key Responsibilities:

• Collaborate with business stakeholders to gather and document requirements.
• Analyze technical and business needs, translating them into functional specifications.
• Support the design, development, and implementation of MedTech solutions.
• Conduct system testing, identify issues, and ensure smooth project delivery.
• Provide ongoing support and troubleshooting post-implementation.

Qualifications:

• Proven experience as a Business Analyst in the MedTech or healthcare sector.
• Strong understanding of medical technologies and regulatory requirements.
• Excellent communication, problem-solving, and analytical skills.
• Experience with project management tools and methodologies is a plus.

Join our team and help shape the future of MedTech!

Argyll Scott Consulting Pte Ltd