Roles & Responsibilities

Monitors and controls the safe and cost efficient technical operation of all assigned vessels using the available resources, within the defined parameters of cost, commercial viability and operational excellence in line with Owners expectations. Ensure environmental compliance policies are upheld.

Ship technical support

• Understands the contractual agreements with customers to be able to deliver the same with regards to the ship management services for each assigned vessel, in a safe and cost efficient manner.
• Monitors the effective operation of the equipment and machineries of the assigned vessels, identifying potential discrepancies from operational standards and proposes and/or implements solutions that will enhance the efficiency, performance and safety of the vessels.
• Participates in the development of the maintenance and repairs plan for the assigned vessels and monitors its accurate execution in order to identify compliance of operations according to time schedule, quality of deliverables and budget.
• Projects the requirements in maintenance and repairs activities, spare parts and technical training of the assigned vessels in order to provide valuable information for the development of the budget and maintenance plan of the vessels. Upon approval, follows-up its accurate execution, identifying, reporting and providing solutions in potential discrepancies.
• Monitors all vessels trading certificates to ensure compliance with existing maritime legislation, safety regulations and operational standard requirements of all regulatory bodies.
• Oversees and monitors the overall technical operation of the assigned vessels, ensures the timely and accurate completion of dry-docking on budget and of other relevant shipboard maintenance and repair activities, in order to support the operational effectiveness of vessels and increase customer’s satisfaction and commitment.

Execution of technical inspections

• Manages all vessel visits, audits and inspections effectively right from planning to implementation and follow up with the aim of supporting and enhancing the operational efficiency of the fleet. Ensures that vessel visit reports are made timely, are accurate and submitted to the owner, Fleet Director and/or MD to allow a detailed analysis of the broad and specific issues affecting vessel operations and the plan for proposed corrective actions.
• Liaises with Quality department in order to obtain the necessary information that will secure the alignment of all technical requirements and standards of the fleet assigned with Company’s QC policy as well as with relevant legislation, contributing towards environmental protection and enhancement of company’s image.

Execution of maintenance activities

• Monitors the accurate, timely and qualitative execution of all maintenance and repairs activities, in cooperation with the Onboard Management Team, reviewing the compliance of deliverables from subcontractors with agreements and requirements, in order to ensure optimum, efficient and safe operation of each assigned vessel.

Purchasing activities

• Monitors and assesses the requisition requests received from the vessels. The approved requisition requests are processed by the Central Purchasing Team or the Technical Officers, as appropriate, for obtaining quotations. Evaluates the quotations received and gives the approval to proceed with the placing of the order and ensures the timely supply of all required spare parts & stores to vessels.

Education and Qualifications:

• B.S. degree in Mechanical, Electrical or Marine Engineering, Naval Architecture or equivalent, or
• Chief Engineer’s qualification.

Work Experience:

• 5 years of sailing experience as Senior Engineer Officer , or
• 5 years of shore experience as a technical superintendent with a ship management/owning company, or
• 5 year of combined experience of the above positions.

Job-Specific Skills:

• Strong knowledge of bulk vessels’ technical requirements and voyage regulations
• Excellent project management skills
• Very good negotiation skills
• Very good people management skills
• Team work and cooperation
• Very good organisational skills
• Worldwide operations require fluency of the English language.
• Ability to converse with East European & Asian crew in own language in order to ensure efficient communication with on-board crew.
• PC literacy

About the Client

Our client is one of the reputed MNC firms in Singapore

Responsibilities

• Responsible for installing, configuring, testing and maintaining Informatica PowerCenter software
• Responsible for reviewing and understanding requirements and translating them into high-level and low-level documentation including source to target mapping
• Responsible for building of data mappings, sessions and workflows to meet requirements (Informatica 10.x or higher)
• Responsible for development of job schedules that integrate the upstream and downstream systems (e.g. Control-M)
• Responsible for unit testing, debugging, and performance testing, with key focus on data accuracy and integrity
• Accountable for on-time delivery of all documentation, design, build, testing, and deployment according to the work breakdown structures
• Work with production support teams as required to support production activities, including production migrations, continuity testing, environment migration activities
• Must have impeccable written and oral communication skills down to the mapping documentation level

Key skill Requirements

• Minimum 4 years or above with the relevant experience
• Proficiency in Informatica PowerCenter 10.x or higher preferably in a Unix (Linux/AIX) environment with AS400/Oracle sources and targets.
• Must have experience in Oracle 19c or higher (SQL*Plus, PL/SQL)/Experience in Unix Shell Scripting (Linux/AIX)
• Experience Job scheduling tools like Control-M
• Good to have experience in Change Control Management tools & Visio
• Have experience on all stages of Software Development Life Cycle (SDLC)
• Able to do requirement gathering, impact analysis, ETL mapping, build, unit testing, support SIT/UAT/Production.

Interested candidates, who wish to apply for the above position, please send in your resume to: [email protected]

We regret to inform that only shortlisted candidates will be contacted

PERSOLKELLY Singapore Pte Ltd EA License No. 01C4394 EA Registration No. R1547247 (Jyothi Chandrakanth Kamath)

**********************************

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an emailto let us know. Please feel free to contact us if you have any queries.

All parties involved in any form of workforce engagement are to strictly adhere to prevailing regulations and laws that govern local fair employment practices, and to invest reasonable efforts in building a strong Singaporean core workforce, recruit and select candidates based on merit and prohibit discrimination based on age, race, gender, religion, marital status and family responsibility or disability. For more information, please refer to MOM and TAFEP websites.

**********************************

Job Responsibilties

• Works with Sales team to deliver pre-sales product and technical support - engaging with customers, clarification meetings, supporting 3rd party events.
• Uncovers customer value drivers and communicates company's value proposition
• Supports the Senior Manager to formulate & execute Marketing and Business Development plan for Building Automation Solutions in both Singapore and Malaysia market.
• Liaise with various departments in Headquarter in Japanese language to report the latest trends and requirements in Singapore and Malaysia market.
• Discovers new business opportunities and develops Account Strategy and Action Plan
• Identifies and influences customer’s decision makers and buying decision criteria.
• Identifies industry trends, collects, and assesses competitive and market intelligence.
• Design BMS system architecture, HVAC control system and optimization program tailored to each project requirement.
• Regularly contact with Japanese and non-Japanese customers in Singapore & Malaysia to exchange information.

Requirements

• Bachelor's degree preferred;
• Minimum 5 years of experience in BMS and Automation industry
• Well versed in specification and selection of Yamatake and Azbil building automation system and product, not limited to system and controller but including field devices like sensors, control valves
• Strong communication presentation skills with the ability to present technical information to non-technical stakeholders.
• Proficiency in Japanese Language both verbal and written is a must

Position Summary

• Field Technical advisor on the construction of Heat Recovery Steam Generator (HRSG) supplied by Mitsubishi Heavy Industries Ltd.’s (MHI) supplier for Banyan CCP4 Combined Cycle Plant.
• To give the technical instruction and direction for the progress, schedule, and work quality of HRSG.

Job responsibility

Technical Advice

• Provide technical advice on the construction of Heat Recovery Steam Generator (HRSG)

Technical Reporting

• Provide a regular progress report to site mechanical manager and head office in Japan and Belgium

Project Management

• Site coordination meetings

Job Requirement

• More than 9 years of experience in construction of HRSGs
• Advanced knowledge of equipment installation for HRSGs
• English fluency (Upper Intermediate or above)
• Computer Skills: MS Office (Excel, Word, Access, PowerPoint, Outlook), SolidWorks, AutoCad
• Work experience at construction sites.

The Job:

• Planning, engineering, and executing maintenance of LPG Tanker and Chemical Tankers
• Monitor the performance of the vessel and crews to ensure compliance with safety regulations

Requirements:

• Ship Engineer of Class 1 COC or Class 2 COC with 2-3 years of sailing experience onboard an LPG / Chemical Vesesl.
• Working experience in a Shipyard and Ship Management Company will be an advantage
• Good knowledge of I.S.M code, Class, and Regulatory matters.
• Team player with a strong sense of responsibility, initiative, and willingness to travel

Please include the following when submitting your application via email to [email protected] :

• Detail resume with sea service record
• Earliest availability date
• Status in Singapore

We regret that only shortlisted candidates will be notified by Email

By applying for this role, you consent to ENEOS Ocean Shipmanagement Pte Ltd collecting and using your submitted personal information to process your application.

Engineering Manager/ Technical Manager/ Process Manager/ Automation Manager

*Permanent Position

*Working Hrs: Mon- Fri /8.15am - 5.45pm

Our client is a global advanced precision engineering & manufacturing solutions provider.

Responsibilities:

• Oversee the design, development, and optimization of injection molding processes for medical, automotive and high precision industrial applications.
• Manage and oversee design, implementation, and optimization of automation solutions for high-precision assembly processes.
• Ensure compliance with industry standards (e.g., ISO 13485 for medical devices, IATF 16949 for automotive).
• Collaborate with cross-functional teams to implement new molds and maintain existing tooling.
• Partner with suppliers to integrate and implement advanced automation solutions for manufacturing.
• Implement Lean Manufacturing and Six Sigma methodologies
• Analyze production data to identify bottlenecks and develop corrective actions.
• Troubleshoot complex manufacturing issues and implement sustainable solutions.
• Lead engineering projects from concept to completion, ensuring they are delivered on time and within budget.
• Collaborate with R&D, Quality, and Manufacturing teams to align engineering initiatives with company goals.
• Manage resources effectively to support multiple projects simultaneously.

Requirements:

• Master/ Degree in Mechanical, Industrial, or Manufacturing Engineering
• Min 8 years of experience in injection molding and automation assembly, with at least 3 years in a managerial role.
• Proficient in CAD software (e.g., SolidWorks) and mold flow analysis tools.
• Strong understanding of automation technologies, including robotics, PLCs, and vision systems.
• Experience with quality management systems (ISO 13485, IATF 16949).
• Knowledge of Lean, Six Sigma, and other continuous improvement methodologies.
• Experience in medical device or automotive manufacturing.
• Familiarity with Industry 4.0 and digital manufacturing technologies.
• Certification in Lean Six Sigma and must be familiar with Minitab software.
• Familiar with FMEA, PPAP, APQP and IOPQ.
• Sound knowledge in SPC, FMEA, DFM, DOE.
• Possess strong leadership, positive attitude, analytical and good interpersonal skills

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Joey

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743 | EA Reg No: R1103523

www.rightrecruit.com.sg

Working within the Embedded SRE organisation, the Application Support Analyst will be handling the day-to-day operations including handle, triage and escalate on alarms and issues that may arise.

Job Responsibilities

• Provide Level 1 troubleshooting support and response, and be on standby up to 12h a day during the week of standby.
• Log, escalate and follow through with issues, ensuring that issues are resolved.
• Review and improve our alarms and alarm response.
• Periodic reviews and submission of the capacity needs of the business.
• Support and/or drive disaster recovery response drills.
• Deploy new versions of the software.
• Generate reports on the operational workloads, review capacity needs of the business, support and/or drive disaster recovery response drills.

Requirements

• Diploma/Bachelor's Degree in Computer Science or other related discipline.
• 2-5 years of Technical/Application Support experience on various technology platforms.
• Responsible and proactive approach to resolving problems, and being able to have a structured approach to problem-solving.
• Open to work shift work and be on on-call rotation.

• To maintain and keep track of calibration of equipment used during analysis
• Conduct regular checking / inspection to ensure buildings are always maintained to a good condition
• Carry out sampling and stability testing.
• Troubleshoot and perform minor repairs on M&E services & installation for the building, which includes but not limited to general handyman work in fitting, installation, electrical wiring, plumbing, painter, carpentry and etc.
• Supervision of conservancy / building and ensure that all maintenance & repair works carried out by term contractors are properly done / complete on time
• Responsible for client’s satisfaction, attend to and investigate any complaint on maintenance and service works
• Assisting the client’s Management Team in emergency control where situation arise
• Perform QC checking, sampling and routine analysis of in-coming raw material.

Job Requirements:

• NITEC, Higher ITEC or Diploma in Electrical/Mechanical Engineering or relevant discipline
• 1 to 2 years of experience in Engineering field
• Able to work on shift duty including weekends and public holidays
• Able to work independently with less supervision
• Able to work under pressure condition
• Proficient in Microsoft Office Applications and computer literacy
• Work locations include SMRT Mandai Depot or other MRT stations
• Able to start immediately or within a short notice

Remarks for Applicants:

Please submit your resume including information on your salary package for the companies that you have been in service and reason for resignation. Please also mention your expected salary and availability for the position. Thanks

· Manage and grow customer base on the assigned product range.

· Prospecting sales visits and regular follow-ups to customer relationship

· Offer commercial and technical proposals or quotations according to technical specifications and customer requirements

· Tender preparation, sales presentations, conversion of prospects to customers and after-sales service

· Gather regional market and competitor information (technical, prices and product development), ensure meeting pre-determined targets.

· Formulation and execution of market growth strategies for tasked Segment and territories

· Collaborate and work with other department/ regional offices to maximise growth and orders

· Prepare and deliver technical presentations and demonstrations to clients

· Collaborate with the engineering and product development teams to understand product specifications and capabilities.

· Oversee and coordinate the installation and implementation of products and systems.

· Ensure projects are completed on time, within scope, and within budget.

· Prepare and present sales proposals, contracts, and agreements.

· Track and report on sales performance and progress against targets.

· Maintain accurate records of customer interactions and transactions.

· Provide post-sales support to ensure customer satisfaction and repeat business.

· Address customer inquiries and resolve issues in a timely and effective manner.

· Gather customer feedback and work with internal teams to improve products and services.

· Traveling within the designated region to meet clients and manage projects as require.

· Participate in industry conferences, trade shows, and networking events to promote the company and its products.

Requirements:

· Diploma in Marine/Mechanical/Electrical/electronic/Engine

· Possess good sales and customer service knowledge

· 7-10 years of sales experience in marine diesel engine or marine equipment related experience.

· Self- motivated, independent and sales driven to develop and increase revenue

· Strong learning curves in upgrading technical knowledge

. Excellent presentation and negotiation skills

· Regional travelling is required

· Good oral and written communication skills in English and Chinese

. ⁠Other assigned duties

For more information, please reach us at [email protected]

*Only shortlisted candidates would be notified*

Key Responsibilities:

Team Leadership: Lead, mentor, and develop a team of engineers and technical staff.

Project Management: Plan, execute, and deliver projects on time and within budget while ensuring quality standards.

Technical Guidance: Provide technical direction and support to team members, helping to resolve complex issues and promoting best practices.

Collaboration: Work closely with vendors, classification society, and other stakeholders to align technical solutions with project objectives.

Quality Assurance: Implement and maintain processes for quality assurance and continuous integration.

Budget Management: Manage technical budgets and resource allocation effectively.

Innovation: Stay current with emerging technologies and industry trends to drive innovation within the team.

• Responsible to oversee the day-to-day planning, management, operations and safety of facilities management works and service with adequate administrative staff.
• Responsible to carry out systems' heath and obsolescence monitoring, obsolescence management, crisis management, fire safety management, investigation and carry out rooy cause analysis of the incident, not limited to accident, power outage, and systems failure.
• Shall be full-time on-site
• Contract period Jan’25 – Jun’25

Techical Officer/ Senior Technical Officer

(Building Security System and Solution)

Successful candidate will carry out service and maintenance works for security systems at clients’ premises, including but not limited to Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems and CCTV systems.

Responsibilities:

• Execution of service and maintenance workflow.
• Liaise closely with client representatives on all service/maintenance related issues.
• Assisting the supervisor in employing teams on service deliveries and distribute responsibilities.
• Manage day-to-day client interactions and expectations for optimal results.
• Provide support to supervisor in ensuring the timely delivery and completion of troubleshoot and service/maintenance of security systems at clients’ premises.
• Familiarise yourself and deliver customer satisfaction base on each client's business, organization and objectives.
• Ensure that works carried out are in compliance with the Workplace Safety and Health Act.
• Perform any other technical tasks as and when required.

Requirements:

• Min Nitec in Electrical/Electronic Engineering with at least 2 years working experience.
• Knowledge and hands-on experience in security systems such as Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems and CCTV systems is a must.
• Knowledge in IT/Network/Server is an added advantage.
• Good interpersonal and problem solving skills.
• Independent, self-motivated individual whom is able to work under minimum supervision.

If you are keen to apply for this role, please click auto-apply

HRLinked Asia Search & Consultancy Pte Ltd (Registration No: 201910702W)

• Responsible to oversee the day-to-day planning, management, operations and safety of facilities management works and service with adequate administrative staff.
• Responsible to carry out systems' heath and obsolescence monitoring, obsolescence management, crisis management, fire safety management, investigation and carry out rooy cause analysis of the incident, not limited to accident, power outage, and systems failure.
• Shall be full-time on-site
• Contract period Jan’25 – Jun’25

• Manage day-to-day technical operations, including attending daily toolbox meetings, compliance with WSHA.
• Respond to emergency fault calls during office hours/standby duties after office hours in rotating duty roster and ensure timely rectification of issues.
• Liase with users and authority to prepare and submit detailed work proposals for job requests.
• Prepare costing, condition assessment, and proposal for maintenance works.
• Responsible for inventory record, drawings, documentations and defect liability period registers.
• Compile and maintain service reports, licenses/certificates on site.
• Prepare and submit certificate of completion for maintenance works and services monthly, and prepare monthly claims.
• Supervise and follow up with sub-contractors to carry out corrective maintenance/adhoc works and to rectify defects reported by quality control/auality, assurance, auditor/users.
• Check and certify works done by sub-contractors.
• Perform any other technical tasks as and when required.

Office Location: Punggol Digital District

• Responsible to oversee the day-to-day planning, management, operations and safety of facilities management works and service with adequate administrative staff.
• Responsible to carry out systems' heath and obsolescence monitoring, obsolescence management, crisis management, fire safety management, investigation and carry out rooy cause analysis of the incident, not limited to accident, power outage, and systems failure.
• Shall be full-time on-site

Position Overview:

To ensure nominated vessels are maintained & operated in line with Statutory Instruments, Company Policy & Safety Management System, Industry Best Practice & Vessel Owners Requirements.

Key Responsibilities & Accountabilities:

1. Act as the single point of accountability, monitoring all onboard activities and providing Technical & Operational Guidance and Support to the Master & crew of nominated vessels as required.
2. Ensure Safety & Environmental Compliance with respect to Statutory Regulations, Company Policy & Safety Management System, Industry Best Practice, and owner’s requirements are given the highest priority by both the shore and vessels staff.
3. Monitor and support all operations onboard nominated vessels closely, provide assurance that they are undertaken in full Compliance with Statutory Regulations, Company Policy & Safety Management System, Industry Best Practice, and owner’s requirements, whilst meeting efficiency & economic expectations.
4. Ensure compliance with Wallem’s SMS, flag and class’s rules and regulations, state requirements, TMSA and other vetting agencies’ conformance.
5. Support Operations superintendent and work together for common objective to operate vessels as required under the SMS and within the purview of Shipman Agreement.
6. Responsible for all budgetary expenditure on nominated vessels, provide timely reports & analysis to Fleet Manager(s) and Owner(s) as required.
7. Responsible for operating vessels within KPIs set out by Wallem’s SMS while maintaining priority on safety and pollution prevention. Technical Superintendent works with other departments of Wallem for meeting commercial expectations and maintaining vessels sea-worthy.
8. Act as Client/Owners point of contact ensuring the highest level of customer Service & Satisfaction are maintained whilst also protecting the Wallem brand and our employees from risk.
9. Provide Direction, Coaching, Guidance, Mentoring and Evaluation of senior sea staff to ensure that all operations are carried out safely & successfully whilst also enabling senior sea staff with their individual career progression & development.
10. Monitor and maintain a thorough knowledge of current Technical Superintendents Work Instructions which maybe subject to review and revision from time to time, whilst completing all Tasks detailed in the Technical Superintendents Work Instructions for nominated vessels.
11. Monitor and optimize vessels and seafarers’ performance. Collaborates with other stakeholders to ensure that vessels and seafarers have adequate resources to perform.
12. Review, write and provide feedback on development area of seafarers, work-performance during specific contract, while setting clear goals and targets.
13. Act as part of the Shore base Emergency Response team as required.
14. Complete any additional tasks as reasonably requested by the Fleet Manager.

Requirements:

• Engineer Officer Qualification, with First Class Chief Engineers Motor license from an IMO whitelist country; OR
• Degree in Marine Engineering/Naval Architecture/Mechanical Engineering or other related.
• Minimum of 2 years’ sailing experience as Chief Engineer onboard; OR
• Minimum of 1 year's experience as Technical Superintendent within the Maritime Industry ashore.
• Able to handle mixed vessels types (e.g dry cargo, containers, gas carriers, RF containers)
• Salary will be commensurate with experience of the candidate.

“If you have the drive for achievement, we’d love to hear from you. Please apply in strict confidence with your full resume and contact details.

Information collected will be kept confidential and used strictly for recruitment purpose only.”

Our client specializes in power solutions, ensuring the delivery and maintenance of electrical supply.

• Perform technical assistance for different components and systems in power management and backup solutions.
• Liaise with end-users for on-site installation, commission, repair and maintenance.
• Ensure on-site work are carried out in safe manner and comply to safety measures.
• Monitor on maintenance contract to ensure work is carried out timely.

Requirements:

• Diploma in Electrical/Electronics Engineering or equivalent.
• At least 4 years of experience in offering technical support in the UPS/DC Power sector.
• Strong interpersonal, communication and presentation skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Responsible to oversee the day-to-day planning, management, operations and safety of facilities management works and service with adequate administrative staff.
• Responsible to carry out systems' heath and obsolescence monitoring, obsolescence management, crisis management, fire safety management, investigation and carry out rooy cause analysis of the incident, not limited to accident, power outage, and systems failure.
• Shall be full-time on-site

• Manage day-to-day technical operations, including attending daily toolbox meetings, compliance with WSHA.
• Respond to emergency fault calls during office hours/standby duties after office hours in rotating duty roster and ensure timely rectification of issues.
• Liase with users and authority to prepare and submit detailed work proposals for job requests.
• Prepare costing, condition assessment, and proposal for maintenance works.
• Responsible for inventory record, drawings, documentations and defect liability period registers.
• Compile and maintain service reports, licenses/certificates on site.
• Prepare and submit certificate of completion for maintenance works and services monthly, and prepare monthly claims.
• Supervise and follow up with sub-contractors to carry out corrective maintenance/adhoc works and to rectify defects reported by quality control/auality, assurance, auditor/users.
• Check and certify works done by sub-contractors.
• Perform any other technical tasks as and when required.

Office Location: Tuas Naval Base

Responsibilities:

• Provide support requirements at customer’s site. This includes installation, repair, servicing, liaising and maintenance of solutions in accordance with the manufacturer’s specifications to ensure customer satisfaction and service operation are achieved.
• Conduct installations based on customer’s requirements and company specifications, from site inspections through to final sign-off and acceptance.
• Diagnose and perform repairs on equipment and solutions and ensure that relevant updates and patches are applied accordingly on-site or remote diagnostic procedures at customer’s sites.
• Initiate escalation procedures and follow up on all open requests of allocated sites to ensure customer satisfaction.
• Manage and maintain daily operations of IT services on the installation, configuration and set-up of all new computer equipment.
• Establish and maintain office network accessibility and troubleshooting.

Requirements:

• Diploma, or Degree, in Engineering/Computer Science/IT or related field.
• Minimum 2 years’ working experience in a technical service role.
• Ability to analyze, diagnose and resolve account service issues.
• Possess IT skills in MS Windows, desktop hardware and network environments.
• Strong organizational and interpersonal skills, and customer oriented.
• Effective verbal and written communication skills.
• Independent and results oriented.

About GlobalFoundries

GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world’s most inspired technology companies. With a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit www.gf.com.

Job Summary

Working in the COO Office, the ideal candidate will support the management of the cadence, systems, and metrics that drive operational excellence for the Global Operations organization, also including managing and keeping track of the status of the operational risks within GF Operations. In addition to this, the candidate will be expected to support the execution of selected engagements within the COO scope, accelerating deliverable releases and promptly communicating results to the Senior Executives. This role will be instrumental in supporting cohesive cross-functional operations and strategic initiatives across global Manufacturing, IT, Supply Chain, and Quality departments with tight partnership from HR and Finance.

The ideal candidate is someone with:

• Outstanding structured problem-solving abilities, being able to use systematic approaches to break down difficult problems into smaller, more manageable parts.
• Exceptional communication skills both written (structured presentations, storytelling, effective meeting minutes) and verbal (executive leadership presence, assertiveness, synthesis skills)
• Proven track record in running complex program management activities (Manufacturing, IT, Supply Chain, etc), including but not limited to managing KPIs and OKRs across multiple organizations, ensuring consistency and proactively addressing potential roadblocks.
• Previous experience in managing and tracking operational risks, including status, impact and mitigation actions.
• Curiosity and interest in managing and being involved in transformational activities within the manufacturing/operations scope.
• Expert command of the Office Suite (Excel, Powerpoint) and PowerBi tool, with proven ability to work confidently with large amount of data and summarize the main information in concise and executive-ready presentations and reports.

Your Job

1. Management of Strategic Priorities:

• Collaborate closely with the COO and the operations leadership team in developing, refining, and managing strategic initiatives that align with the company's goals and objectives.
• Stand up and manage robust program management office (PMO) capabilities (frameworks, process, tools, people) to ensure delivery of core, multi-year priorities for Operations group.
• Establish and maintain key performance indicators (KPIs) to track progress and measure the effectiveness of operational strategies.
• Synthesize complex data and information from various projects to provide insights that enhance decision-making processes for COO and direct reports.
• Identify areas to streamline existing processes and workflows through global standards, identifying areas for opportunity with global working teams.

2. Cross-Functional Collaboration:

• Act as a bridge between the COO and various departments, fostering open and effective communication channels.
• Champion cross-functional projects, ensuring cohesion and synergy across teams for optimal operational outcomes.
• Drive clarity across departments in terms of priority, timelines, and resourcing.
• Empower team members to leverage their strengths in communication and cross-departmental collaboration.

3. Management of specific engagements with Operations:

• Gather and analyze information, formulate and test hypotheses, and develop and communicate recommendations.
• Synthesize clear takeaways from complex information into clear takeaways and recommendations using both qualitative and quantitative methods.
• Monitor financial performance against targets, leveraging analytical and financial acumen to identify and drive continuous improvements in cost reduction.
• Work effectively with diverse teams to come up with the best solution and move people and organizations to act.
• Communicate effectively with all audiences, including senior leaders, in a structured manner.

Required Qualifications

• Education/Experience – BS + 5yrs of experience; MS + 2yrs of experience; PhD + 1yr of experience
• Experience in operations management, strategic planning, or related roles in a global manufacturing environment (preferred).
• Previous experience in Management Consulting (preferred).
• Demonstrated expertise in synthesizing complex information and communicating it effectively across diverse stakeholders.
• Clear ability to balance multiple priorities, timelines, and stakeholders and demonstrated aptitude for navigating conflict-resolution and uncertainty
• Outstanding communication skills, experience in leading cross-functional teams, and history of driving operational excellence
• High proficiency in project management tools, reporting, and Microsoft Office Suite + PowerBi tool
• Open and able to travel internationally and willing to manage frequent international calendars / meetings

1. Senior Technical Officer
2. Technical Officer

• Working location: Tan Boon Liat Building (Near Havelock MRT)
• Working days & hours: Mon-Fri, 8.30am to 6pm
• Salary range: Technical Officer (Up to $3000), Senior Technical Officer (Up to $3600) + Transport allowance

Interested applicants can send your resume to ✉ [email protected] or WhatsApp: +65 94283063 and allow our Consultants to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

Requirements:

• At least 2 years working experience.
• Require min class 3 licence, possession of own car/motorbike is preferred
• Require G50 clearance (Cat2A) for access to military camps for work
• Knowledge and hands-on experience in security systems such as Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems and CCTV systems is a must.

Responsibilities:

• Execution of service and maintenance workflow.
• Liaise closely with client representatives on all service/maintenance related issues.
• Mentor a team of service team members.
• Assisting the supervisor in employing teams on service deliveries and distribute responsibilities.
• Manage day-to-day client interactions and expectations for optimal results.
• Provide support to supervisor in ensuring the timely delivery and completion of troubleshoot and service/maintenance of security systems at clients’ premises.
• Ensure that works carried out are in compliance with the Workplace Safety and Health Act.
• Perform any other technical tasks as and when required.

Leo Shin Guan Reg No: R22108030

The Supreme HR Advisory Pte Ltd EA No: 14C7279

1. Senior Technical Officer
2. Technical Officer

• Working location: Tan Boon Liat Building (Near Havelock MRT)
• Working days & hours: Mon-Fri, 8.30am to 6pm
• Salary range: Technical Officer (Up to $3000), Senior Technical Officer (Up to $3600) + Transport allowance

Interested applicants can send your resume to ✉ [email protected] or WhatsApp: +65 94283063 and allow our Consultants to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

Requirements:

• At least 2 years working experience.
• Require min class 3 licence, possession of own car/motorbike is preferred
• Require G50 clearance (Cat2A) for access to military camps for work
• Knowledge and hands-on experience in security systems such as Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems and CCTV systems is a must.

Responsibilities:

• Execution of service and maintenance workflow.
• Liaise closely with client representatives on all service/maintenance related issues.
• Mentor a team of service team members.
• Assisting the supervisor in employing teams on service deliveries and distribute responsibilities.
• Manage day-to-day client interactions and expectations for optimal results.
• Provide support to supervisor in ensuring the timely delivery and completion of troubleshoot and service/maintenance of security systems at clients’ premises.
• Ensure that works carried out are in compliance with the Workplace Safety and Health Act.
• Perform any other technical tasks as and when required.

Leo Shin Guan Reg No: R22108030

The Supreme HR Advisory Pte Ltd EA No: 14C7279

About Caxton Associates:

Caxton Associates, founded in 1983, is a global trading and investment firm with offices in London, New York, Monaco, Singapore and Dubai. Caxton Associates’ primary business is to manage client and proprietary capital through global macro hedge fund strategies. Assets are managed via a broad mandate to trade in a variety of global markets and instruments.

About the role:

We are seeking a hands-on, proactive and highly independent Desktop Support Engineer to manage our IT support and operations for our Singapore office (approx. of around 15 users). You will be directly reporting to our IT Support & Helpdesk Manager, based in London. The Desktop Support Engineer will be required to research issues and bring resolution to complex problems.

The working hours are 7:30AM to 17:00PM with rotational after-hour support shared between the team. The role sits as part of a broader team responsible for global desktop support and desktop engineering. This is a 5-day in office role.

The role will provide many learning opportunities such as Office 365 Administration, Exchange Online, MS Teams Administration, Endpoint Management (InTune), Azure and Active Directory Identity Administration.

Responsibilities:

Support Role:

• Provide desktop support to the end users (trade floor and operations). This includes: installation, repair, servicing and maintenance of hardware (e.g. printers/scanners) equipment.
• Provide in office and remote support to our Singapore users.
• Setup all video and audio conference calls in our Singapore office.
• Support, maintain, and troubleshoot hardware and software updates on the trade floor
• Perform PC workstation moves, add, changes.
• Responsible for maintaining the ticket queue (utilising Asana) and assign them to appropriate group as needed
• Respond to malware virus alert and take appropriate step to block, isolate, and mitigate risk exposure.
• Involve with after hours on-call support rotation and Friday patching of PCs
• Providing onsite support, build relationships with Executives, Portfolio Managers and Infrastructure staff assisting them with questions, incidents and service requests

Essential technical skills & experience:

• Trade applications: Bloomberg and X_Trader
• Microsoft O365 (Windows 10/11 support), Adobe Acrobat, Google Chrome
• Active Directory
• Mobile telephony support (Microsoft Intune MDM, Cisco IP phones and IP communicator software)
• Remote desktop (Cato VPN)
• Confluence
• Proprietary developed applications

Project Role:

• Create package for automated deployment - globally deploy changes and remove software.
• Create, deploy and troubleshoot Windows 10 images via MDT/WDS
• Analyse and revamp current group policies

Requirements:

• Minimum 5 years of relevant experience, preferably in banking/financial services industry.
• Ability to work independently, and sufficiently qualified to handle situations locally outside of UK/US hours.
• Ability to work in a fast paced, high pressure work environment.
• Strong customer support skills with a focus on delivering high quality service.
• Strong communication and interpersonal skills and a self-starter.
• Strong collaborative skills with the ability to work effectively in a team-oriented environment.
• A keen eye for detail, a curious mindset, and a willingness to challenge the status quo.
• Willing to work off-hours and weekends as needed to address critical issues or system maintenance
• Powershell experience is a plus
• Displays and operates at the highest degree of ethics and integrity.

We are seeking a highly skilled and motivated individual with expertise in MS SQL, PowerShell, C++, Unix Scripting, REST API development,. The ideal candidate will contribute to developing, implementing, and maintaining robust solutions tailored to our business needs.

Key Responsibilities:

• Design, develop, and maintain MS SQL databases, ensuring efficient data storage and retrieval. Perform database optimization, query tuning, and management of large-scale data sets.
• Develop and maintain PowerShell scripts to automate repetitive tasks, system monitoring, and report generation. Ensure smooth integration between different systems and platforms.
• Write high-performance, maintainable, and scalable code using C++.
• Develop scripts for managing and automating server tasks, ensuring reliability and optimal performance of systems.
• Design and implement RESTful APIs, ensuring seamless communication between services and applications. Develop efficient and scalable solutions in line with modern development standards.
• Troubleshoot and debug complex technical issues, identifying and applying solutions timely.
• Maintain clear and up-to-date documentation for all developed systems, scripts, and APIs.

Requirements:

• Min 5+ Years of experience of Software Engineering
• Proficiency in MS SQL for database management and development.
• Hands-on experience in PowerShell scripting for automation.
• Strong knowledge of C++ programming and object-oriented design.
• Expertise in Unix Scripting for server management.
• Familiarity with REST API architecture and development.