Salary: up to $8000

Duration: 6 months

Working Days & Hours: Mon-Fri Office Hours

Location: Kranji

Job Description:

Support Site Manufacturing (Upstream/Downstream) Activities Through:

• Planning and executing activities required for process investigation such as performing process impact assessment, participating and performing root cause analysis. Work with cross functional teams for process issues investigation
• Analyzing process trends, monitoring process performance as part of the CPV program. Escalate and perform investigation in event of any out of trend or process issues
• Leading process investigations to identify root cause and implement action plans to correct or prevent re-occurrence
• Planning and executing process improvements and robustness projects
• Leading/supporting cycle development for process parameters where applicable
• Drafting process training slides and providing process training to cross functional teams
• Raising change controls as change owners for process changes
• Performing impact assessments for relevant change controls
• Providing technical /process parameters for creation and revision of master batch records. Review master batch records.

Lead/Support Technology Transfer for New Technologies/Product Introduction Through:

• Leading/Supporting the evaluation of new manufacturing technologies and/or equipment for process improvement or process capabilities build
• Planning and executing technical transfer activities according to project timelines. Raise change controls where applicable to support the technical transfer
• Monitoring process performance and trending through the site CPV program. Proactively investigate where required to ensure process robustness.
• Performing risk assessment, drafting required technical transfer and process control strategy documents and updating lifecycle documents
• Authoring study and process validation protocols and reports where needed

Others:

• Support audits, regulatory submissions and responses
• Support and execute global manufacturing sciences initiatives according to project timelines
• Responsibility to adhere to any applicable EHS requirements.
• Commitment to a fair and respectful relationship to others and behavior in accordance with Takeda’s Code of Conduct.
• Any other duties as assigned by supervisor.

Job Requirements: Min Degree in Biochemistry, Chemistry, Chemical Engineering, Biotechnology, Biochemical Engineering with minimum 3 - 4 years of relevant experience in pharmaceutical industry

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

Senior Electrical Design and Commissioning Engineer (Marine Vessel Solution)

• Penjuru (Transport Pickup Provided at: Jurong East, Choa Chu Kang, Bishan & Serangoon)
• Monday - Friday: 8.30am to 6.00pm
• S$ 4,000 - 6,000

Key Responsibilities

• Electrical Design: Collaborate on system requirements, develop schematics, select components, and design control logic for marine vessel propulsion/control systems.
• Commissioning and Integration: Oversee installation, testing, and validation of electrical systems.
• System Optimization: Analyze performance, identify optimization opportunities, and implement innovative solutions.
• Documentation and Reporting: Create technical documentation and commissioning reports.
• Regulatory Compliance and Safety: Ensure compliance with maritime regulations, industry standards, and safety guidelines.

Requirements

• Diploma/Bachelor's in Electrical Engineering or related field
• Relevant experience in electrical design/commissioning (marine propulsion/control systems preferred)
• Proficiency in electrical design software (AutoCAD Electrical, EPLAN) and simulation tools
• Knowledge of marine electrical systems, industry standards (ABS, DNV, IMO), and regulations
• Requires to travel overseas for commissioning activities (shipyards/vessels)

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

- 2-Year Contract (renewable and convertible)

- Jurong East/Novena

- Monday to Friday, 8.30am – 6pm

- Up to $5,500

Job Responsibilities:

• 2 to 3-years’ experience in maintenance and management of day-to-day operation of PABX, telephony systems, voice servers, gateways, phones, multi-media interactions system
• Coordinate and work with vendors on telephony infrastructure and trunk services
• Perform preventive maintenance of telephony systems
• Conduct reviews and feedback on the maintenance
• Manage ad-hoc maintenance job
• Support on customer exercise
• Server / SAN / network hardware troubleshooting and replacement
• Operating system / software troubleshooting
• Hardware spares preparation and management
• Hardware obsolescence management
• Support customer regular system audit

Period:

• 2-Year Contract (renewable and convertible)

Location:

• Jurong East/Novena

Working Hours:

• Monday to Friday, 8.30am – 6pm

Salary:

• Up to $5,500

Job Requirements:

• Degree holders in Computer Science, Computer Engineering, or Electrical and Electronics Engineering or equivalent.
• Has minimum two years’ experience in mission critical systems and preferably three years’ experience in hardware installation and deployment.
• Has minimum 1 year of Computer System engineering (System configuration, Network system and System backup) knowledge.

Interested applicants, kindly email your detailed resume (MS Word format is preferred):

[email protected] (Reg No: R2198469)

Please ensure that applications sent through email are no bigger than 1Mb.

We thank all applicants for your interest but regret to inform that only shortlisted candidates would be notified.

Success Resource Centre Pte Ltd (EA License Number: 04C3201)

160 Robinson Road, #13-07/08/09 SBF Center, Singapore 068914

T: 6337 3183 | W: www.successhrc.com.sg

Senior Project Engineer (Demolition Works)

5.5 days
Mon-Fri: 9am-530pm || Sat: 9am-12pm
$3800-$5000
Pioneer (Transport Provided from Joo Koon MRT)

Job Responsibilities:

• Supervise new erections, additions, and alterations (A&A) to existing buildings, including earth retaining and stabilizing systems, as well as specialist designs for demolition works.
• Plan and implement the project, ensuring all construction activities on-site align with the master and detailed work programs.
• Work independently and as an integral member of the Site Management team.
• Prepare, plan, and submit project-related documents such as schedules, method statements, design plans, risk assessments, monthly reports, etc.
• Supervise the execution of construction works to ensure compliance with contract specifications, construction drawings, the company’s quality standards, Environmental, Safety & Health (ESH) practices, and other contract documents.
• Coordinate and liaise with the client’s representatives, relevant authorities, consultants, subcontractors, suppliers, etc., to address both technical and non-technical issues and document resolutions.
• Plan and coordinate site works while resolving drawing details and discrepancies.
• Identify potential and existing problems impacting the work schedule, offering solutions to the relevant team/department.
• Liaise with clients or consultants for site inspections and technical report submissions, ensuring all necessary records are maintained on-site.
• Assist the Contracts Department (QS) in verifying progress payments and claims from contractors.
• Attend regular meetings with clients’ representatives, consultants, and contractors to ensure project progress is on schedule.
• Establish and maintain an effective document control system, conducting reviews of detailed design drawings, project documents, and specifications.

Job Requirements:

• A minimum of a Degree in Civil Engineering, Architecture, or an equivalent field.
• At least 10 years of project or site management experience, particularly in Demolition projects.
• Ability to lead site management activities.
• Familiarity with wire saw cutter and waterjet cutter methods for demolition is a must

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

• 5 days, MNC, Boon Lay, transport provided (2 ways)
• Salary: $4000 - $4800, 1mth AWS, performance bonus
• Medical/dental benefits

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Job Description

As a Technical Executive, you will be responsible for overseeing the technical aspects of property management and maintenance. You will work closely with property managers and maintenance teams to ensure that properties are well-maintained, efficient, and meet regulatory requirements. This role requires a strong technical background, excellent organizational skills, and the ability to manage multiple projects simultaneously. The ideal candidate will have knowledge of building systems, technology infrastructure, and experience in implementing energy-efficient solutions.

Key Responsibilities:
Technical Property Management:

• Oversee the technical aspects of property management, including building systems, infrastructure, and maintenance protocols.

Maintenance Planning and Execution:

• Collaborate with property managers to develop and implement preventive maintenance plans, ensuring that building systems, equipment, and infrastructure are functioning optimally.
  

Energy Efficiency:

• Identify opportunities to optimize energy usage in buildings and implement sustainable solutions to drive energy efficiency and cost savings. Stay updated on energy regulations and rebates to maximize efficiency and compliance.
  

Vendor Management:

• Engage and manage relationships with service providers, contractors, and suppliers for technical maintenance and repairs.
• Ensure timely completion of tasks and adherence to quality standards.

Technical Assessments and Audits:

• Conduct regular inspections and assessments of properties to identify maintenance needs, potential risks, and compliance with technical standards and regulations.
• Develop action plans to address identified issues.
  

Budgeting and Cost Management:

• Assist in the preparation and management of the technical budget, monitoring expenses, and optimizing costs while maintaining quality standards.
  

Technology Integration:

• Evaluate and implement emerging technologies and systems to enhance property operations, such as building automation, security systems, IoT devices, and energy management software.
  

Compliance and Regulations:

• Stay updated on local building codes, safety regulations, and environmental requirements.
• Ensure properties comply with relevant standards and implement necessary remedial actions.
  

Communication and Coordination:

• Collaborate with property management teams, tenants, and other stakeholders to address technical issues, provide updates on maintenance projects, and ensure timely resolution of concerns.
  

Documentation and Reporting:

• Maintain accurate and up-to-date records of property maintenance activities, contracts, service agreements, and technical documentation.
• Prepare reports on building performance, maintenance activities, and expense tracking.
  

Qualifications:

• Diploma or Degree in Engineering, Facilities Management, or a related field with 3 years experience.
• Proven experience in property management or technical maintenance roles.
• Strong knowledge of building systems, including HVAC, electrical, plumbing, and fire safety systems.
• Familiarity with energy management systems and sustainability practices.
• Excellent organizational and project management skills.
• Strong problem-solving and decision-making abilities.
• Ability to prioritize and manage multiple tasks and projects simultaneously.
• Good communication and interpersonal skills to collaborate with various stakeholders.
• Knowledge of local building codes, safety regulations, and environmental standards.
• Proficiency in using property management software and tools.
  Valid certifications in relevant technical areas (e.g., HVAC, electrical) are a plus.

Job Responsibilities:

• Leads the technical team to support construction team for all design matters
• Reviews all technical documentation and drawings of the Project works
• Works closely with the appointed Consultants and construction team on designs and project deliverables to enhance site efficiency and constructability
• Leads on the design approval from the Authority/Agency including URA,BCA,LTA,PUB etc for the Project works
• Manages design approval process in a timely manner to resolve all technical issues
• Ensures strict compliance of the design in accordance with the contractual requirements
• Ensures the distribution of all the approved and latest drawings and other relevant documents to the relevant parties
• Leads the technical team to work closely with in-house BIM team and resolves all clarifications on technical requirements pertaining to the Project works
• Identifies and highlights to Management and project team of any potential risks or issues that will impact Project performance
• Prepares and presents design progress status and slides to Management, project team and Client as and when required.
• Strong coordination and collaboration with other disciplines (i.e Architectural, MEP, BIM etc.) on design to ensure delivery of high quality outcome
• Supports tender team and prepares technical tender documents as per specifications for bidding of civil and structural engineering projects as and when assigned
• Attends Progress Meeting, Technical Meetings, Coordination Meetings, Site Meetings, etc.

Job Requirements:

• Candidate must possesses Bachelor's Degree in Civil Engineering recognized by the Profressional Engineering Board
• At least 8-12 years of design experience or design management experiece.

• Position title: Sales Engineer
• Location: Loyang Way, Loyang Industrial Estate
• Working Days: Mon - Fri
• Working hours: 830 a.m. to 530p.m.
• Salary: $3,000 - $4,500 (depends on experience)

Interested applicants can also send your resume to WA: +65 8827 8712 (Ms Lynne) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

TAN LEE XIAN Reg No: R24123487

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Position Overview:
We are seeking a motivated and experienced Sales Engineer to join our team. The Sales Engineer will play a critical role in driving sales and delivering technical solutions that meet our clients’ needs. This role requires a blend of technical expertise and sales acumen, as you will work closely with customers to understand their requirements, present tailored solutions, and support the sales process from inception through to implementation.

Key Responsibilities:

1. Customer Engagement and Relationship Management:

• Develop and maintain strong relationships with key customers and stakeholders.
• Conduct needs assessments to understand customer requirements and challenges.
• Provide technical consultation to customers, offering solutions that align with their operational goals.

2. Sales Support:

• Scout, develop and obtain leads with new customers to develop sales in your assigned territory.
• Prepare and deliver compelling presentations and product demonstrations to potential clients.
• Develop detailed quotes and proposals, addressing customer needs and specifying technical requirements.

3. Service Support:

• Liaise with customers, end-users and purchasers to introduce the company’s service capabilities.
• Drive the sales of services to existing and new customers with equipment sold by the company.
• Coordinate with the engineering and service teams to ensure seamless project execution and delivery.
• Act as a point of contact for post-sales support, troubleshooting and sales of service.

4. Market and Product Knowledge:

• Stay up to date with industry trends, emerging technologies, and competitive landscape.
• Continuously enhance product knowledge and understand advancements in equipment and service offerings.
• Share insights, feedback and customer requirements with the product development and marketing teams to drive innovation.
• Participate in all company-participated trade shows and seminars in Singapore and abroad.

5. Training and Support:

• Educate customers on equipment features, benefits, and maintenance requirements.
• Conduct training sessions for customers and internal teams to ensure proper usage and understanding of products.
• Assist management with any other ad-hoc tasks and duties as and where required.

Requirements

• Education: Bachelor’s degree in engineering, Mechanical Engineering, Electrical Engineering preferred or related technical field, Minimum Diploma in related technical field.
• Experience: Minimum of 3 years of experience in a sales engineering role, preferably within the equipment sales and service industry.
• Technical Skills: Strong understanding of vacuum pump technology or other technical equipment. Proficiency in technical sales and solution design.
• Sales Skills: Proven track record in achieving sales targets and managing customer relationships.
• Travel: Required to support regional customers in Southeast Asia (30-40%).

Job Responsibilities:

• Leads the technical team to support construction team for all design matters
• Reviews all technical documentation and drawings of the Project works
• Works closely with the appointed Consultants and construction team on designs and project deliverables
• to enhance site efficiency and constructability
• Leads on the design approval from the Authority/Agency including URA,BCA,LTA,PUB etc for the Project
• works
• Manages design approval process in a timely manner to resolve all technical issues
• Ensures strict compliance of the design in accordance with the contractual requirements
• Ensures the distribution of all the approved and latest drawings and other relevant documents to the
• relevant parties
• Leads the technical team to work closely with in-house BIM team and resolves all clarifications on
• technical requirements pertaining to the Project works
• Identifies and highlights to Management and project team of any potential risks or issues that will impact
• Project performance
• Prepares and presents design progress status and slides to Management, project team and Client as and
• when required.
• Strong coordination and collaboration with other disciplines (i.e Architectural, MEP, BIM etc.) on design to
• ensure delivery of high quality outcome
• Supports tender team and prepares technical tender documents as per specifications for bidding of civil
• and structural engineering projects as and when assigned
• Attends Progress Meeting, Technical Meetings, Coordination Meetings, Site Meetings, etc.

Job Requirements:

• Candidate must possesses Bachelor's Degree in Civil Engineering recognized by the Profressional
• Engineering Board
• At least 8-12 years of design experience or design management experiece.

Job Description:

• manage day-to-day technical operations, including attending daily toolbox meetings, compliance with WSHA.

• respond to emergency fault calls during office hours/standby duties after office hours in rotating duty roster and ensure timely rectification of issues.

• liase with users and authority to prepare and submit detailed work proposals for job requests.

• prepare costing, condition assessment, and proposal for maintenance works.

• responsible for inventory record, drawings, documentations and defect liability period registers.

• compile and maintain service reports, licenses/certificates on site.

• prepare and submit certificate of completion for maintenance works and services monthly, and prepare monthly claims.

• supervise and follow up with sub-contractors to carry out corrective maintenance/adhoc works and to rectify defects reported by quality control/auality, assurance, auditor/users.

• check and certify works done by sub-contractors.

• perform any other technical tasks as and when required.

Responsibility:

• Coordinating projects and monitoring activities at worksites.
• Taking appointments.
• Managing workers.
• Coordinating tasks and scheduling.
• Liaising with clients and vendors.
• To prepare jobsheets for timely submission.
• To handle any other assignments, eg. ad-hoc duties.

Requirement

• Diploma Civil Engineering / Engineering.
• Minimum 5 years of relevant experience in the construction sector.
• Possess Valid Class 3 Driving license.
• Only Singaporean or PR.

Duties and Responsibilities:

· Serve as the technical expert for detailed design and construction aspects of the project

· Answer questions and resolve issues brought forth by the internal team members, client, consulting engineers and contractors

· Perform expediting actions in sourcing technical information, submission of data/method statement for installation, delivery and transport of materials/equipment, storage and issuance for site installation works

· Prepare detailed installation plans, methodology, processes and procedures for support of construction team

· Propose and oversee timelines for engineering proposals and submissions are met

· Check and confirm the accuracy of submissions from contractors, vendors and suppliers for the work to be performed, coordinate and ensure approvals are received from client in timely manner

· Set up procedure and processes in monitoring and tracking of engineering related documentation throughout project lifestyle

· Communicate and collaborate with other managers, suppliers, and contractors

· Prepare and deliver various installation/erection or construction related presentations, both internally and externally

Requirements and Qualifications:

· Analytical and mathematical mind, capable of evaluating and solving various complex problems

· Leadership skills necessary to manage and develop a teamwork ethics

· Organizational competencies and project management skills to keep project, processes, and the entire engineering tasks on track

· Self-motivated attitude with the ability to multitask and thrive in a timeline-driven environment

· Interpersonal communication skills with expertise in distilling complicated topics to a broader audience

· Ability to work independently as well as part of a team

Job Description:

• manage day-to-day technical operations, including attending daily toolbox meetings, compliance with WSHA.

• respond to emergency fault calls during office hours/standby duties after office hours in rotating duty roster and ensure timely rectification of issues.

• liase with users and authority to prepare and submit detailed work proposals for job requests.

• prepare costing, condition assessment, and proposal for maintenance works.

• responsible for inventory record, drawings, documentations and defect liability period registers.

• compile and maintain service reports, licenses/certificates on site.

• prepare and submit certificate of completion for maintenance works and services monthly, and prepare monthly claims.

• supervise and follow up with sub-contractors to carry out corrective maintenance/adhoc works and to rectify defects reported by quality control/auality, assurance, auditor/users.

• check and certify works done by sub-contractors.

• perform any other technical tasks as and when required.

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Technical Officer (Service & Maintenance)
• Working Location: West (Jurong Port) – Nearest MRT: Lakeside
• Working Hours: 5.25 days, Monday to Friday (8.30 am – 5.30 pm), Every Alternate Saturday, (8.30 am – 12.30 pm)
• Salary Package: Up to $4000 + OT + Performance Bonus + AWS
• Duration: Permanent

Key Responsibilities

• Monitor, operate, and maintain cement plant machinery, including crushers, kilns, mills, and packing units, ensuring smooth and efficient production processes.
• Perform routine maintenance and troubleshooting of mechanical, electrical, and control systems to minimize downtime and ensure consistent plant operations.
• Continuously monitor equipment performance, identify potential issues, and take proactive steps to ensure optimal equipment efficiency and product quality.
• Ensure strict adherence to safety protocols, plant operating procedures, and environmental regulations. Report any incidents or hazards immediately.
• Work with process engineers and plant supervisors to optimize production processes and improve yield and energy efficiency.
• Assist in managing the inventory of spare parts, tools, and equipment to ensure readiness for any maintenance or repair jobs.
• Record, analyze, and report operational data, including machinery performance, production rates, and quality control results, to assist with performance reviews and decision-making.
• Work closely with cross-functional teams, including mechanical, electrical, and process engineers, to resolve technical issues and support plant improvements.

APPLY NOW!!!

• Min. ITE
• Min. 3 years experience in related fields (service and maintenance)

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69905 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Technical Officer (Service & Maintenance)
• Working Location: West (Jurong Port) – Nearest MRT: Lakeside
• Working Hours: 5.25 days, Monday to Friday (8.30 am – 5.30 pm), Every Alternate Saturday, (8.30 am – 12.30 pm)
• Salary Package: Up to $4000 + OT + Performance Bonus + AWS
• Duration: Permanent

Key Responsibilities

• Monitor, operate, and maintain cement plant machinery, including crushers, kilns, mills, and packing units, ensuring smooth and efficient production processes.
• Perform routine maintenance and troubleshooting of mechanical, electrical, and control systems to minimize downtime and ensure consistent plant operations.
• Continuously monitor equipment performance, identify potential issues, and take proactive steps to ensure optimal equipment efficiency and product quality.
• Ensure strict adherence to safety protocols, plant operating procedures, and environmental regulations. Report any incidents or hazards immediately.
• Work with process engineers and plant supervisors to optimize production processes and improve yield and energy efficiency.
• Assist in managing the inventory of spare parts, tools, and equipment to ensure readiness for any maintenance or repair jobs.
• Record, analyze, and report operational data, including machinery performance, production rates, and quality control results, to assist with performance reviews and decision-making.
• Work closely with cross-functional teams, including mechanical, electrical, and process engineers, to resolve technical issues and support plant improvements.

APPLY NOW!!!

• Min. ITE
• Min. 3 years experience in related fields (service and maintenance)

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69905 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Responsibilities:

• Conduct investigation into causes of bus accidents / incidents arising from bus defects
• Assist in planning & managing campaigns for retrofitting on buses for improved performance, safety and standardization
• Assist to implement maintenance policies for vehicle improvement to meet our operational requirements in accordance to manufacturers’ recommendations
• Conduct engineering audits, smoke checks and field visits
• Any ad-hoc jobs as per assigned

Requirements:

• Diploma in Engineering
• At least 5 years' relevant experience in automotive industry
• Hands-on experience on bus repair
• Proficient in software applications such as Microsoft Office and SAP

We regret to inform that only shortlisted candidate will be notified.

Submitting this application for this position, you acknowledge that you have read the Data Protection Policy for Job Applicants (the “Policy”) of SBS Transit Ltd and its subsidiaries, affiliates and related corporations (‘SBST”) and consent to:

a. The collection, use and disclosure of your personal data by SBST for the purposes of your application and potential employment with SBST and the purposes set out in the Policy: and

b. SBST’s retention of your personal data for two years for consideration of future job opportunities (where applicable) form the date of submission of application.

Responsibilities:

• Carry out site supervision duties in accordance with the Building Control Act
• Ensure works are done appropriately following the approved drawings
• Assist the Resident Engineer on all site and/or construction-related matters.

Requirements:

• Minimum Diploma in Electrical Engineering or equivalent
• At least 10 years of construction experience in supervising electrical works
• A person with good communication skill and with ability to work in a team

Cyber Security Engineer (Shift)

Job Description:

• Perform remote standby during weekends, public holidays, and after office hours for Monday – Friday.
• Provide phone/email and on-site (if required) support, resolving, mitigation, troubleshooting and investigating issues pertaining to cybersecurity solutions the company has implemented for its clients.
• Log incidents (either via phone or email) into incident management system (ITSM).
• Track and handle all incidents within client’s SLA.
• Coordinate with stakeholders for service recovery and follow through all the necessary escalation to respective team(s).
• Follow up with client on pending tickets for closure.
• Provide daily handover report after each shift.
• Onsite training during office hours as part of onboarding process and occasional trainings to keep up to date with the product

Job Requirements:

• Professional certifications in Information Technology or related fields.
• Self-motivated, always keen to learn new technologies and able to work independently.
• Possess logical thinking process in solving technical problems.
• A well-natured team player with strong customer centric mindset.
• Good communication skills with clients and various stakeholders.
• Experience or knowledge in Microsoft Windows and Server, Microsoft SQL, Networking and Virtualisation is an added advantage.

• Design, develop, implement, and maintain software systems.
• Collaborate with team leads to understand client needs, assess technical implications, and estimate project timelines.
• Create, update, and review technical documentation.
• Oversee offshore teams, ensuring adherence to quality standards and technical guidelines.
• Review code for potential issues, conduct unit and integration testing, and support user acceptance testing.
• Develop deployment strategies, support production environments, troubleshoot issues, and implement corrective actions.
• Perform other tasks as assigned.

Job Requirements:

• Bachelor's degree in Computer Science or Information Technology with at least 5 years of software development experience using Java (J2EE, Spring Framework) and frontend technologies (JavaScript, Angular, AngularJS), preferably in a banking or financial setting.
• Experience working with offshore teams.
• Hands-on experience with deploying and managing cloud-native Java applications on Microsoft Azure.
• Knowledge of the Newgen BPM system.
• Strong understanding of software development life cycle methodologies, including Waterfall and Agile.
• Excellent communication, presentation, and interpersonal skills.
• Self-motivated, proactive, and able to work independently or as part of a team. Demonstrates a strong sense of responsibility and ownership.

To apply, please visit www.gmprecruit.com and search for Job Reference: 24991

To learn more about this opportunity, please contact Gia Grace at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.

• Possess a deep understanding of network protocols, risk management, security standards, and regulatory compliance.
• Analyze network traffic patterns, identify bottlenecks, and track performance to proactively address issues and optimize network efficiency.
• Actively participate in network audits and collaborate with stakeholders to ensure the Bank's APAC network adheres to bank rules and regulatory guidelines.
• Establish and enforce network operational procedures, supervise the Network Operations team, review KPIs, and ensure SLAs are met.
• Manage vendors and service providers, including MSAs and SAs, to optimize service reliability and cost-efficiency.
• Coordinate with cross-functional teams on network planning and service-related matters, such as DR drills, third-party risk management, asset management, lifecycle management, privilege access management, and patch management.
• Oversee the design and architecture of the network to ensure scalability, reliability, and security.
• Possess a strong understanding of network budget planning, including Capex and Opex.
• Develop and maintain network performance reports for management review.

Qualifications:

• Bachelor's degree in Computer Science, Information Technology, or a related field with at least 5 years of experience as a Network Operations Lead or Senior Network Engineer.
• Minimum of 8-10 years of experience in network planning, design, and implementation.
• CCNP/CCDP, ITIL, or equivalent certifications. CCIE certification is preferred.
• In-depth knowledge of network protocols, risk management, security standards, and regulatory compliance.
• Proven hands-on experience in network deployment for large enterprises and data centers.
• In-depth knowledge of IP routing, switching, BGP, OSPF, SD-WAN, QoS, and VPC.
• Proficient with Cisco, Fortinet, Checkpoint, F5, or equivalent network devices.
• Proven ability to work effectively with cross-functional teams.
• Prior experience in the banking or financial industry is advantageous.
• In-depth knowledge of IP routing, switching, BGP, OSPF, SD-WAN, QoS, and VPC.
• Strong technical writing and documentation skills.
• Excellent written and verbal communication skills, capable of presenting to both technical and non-technical audiences.

To apply, please visit www.gmprecruit.com and search for Job Reference: 24981

To learn more about this opportunity, please contact Gia Grace at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.

Job Description:

• Support start-up, contract maintenance and other service activities with emphasis on safety and protection.
• Perform routine preventive maintenance, logging, corrective maintenance works and to carry out warranty repairs.
• Participate in service and repair of gas detectors, safety activities, emergency response, breakdown calls and ad hoc projects.
• Manage all orders efficiently until fulfilment stage, by working closely with Service team.
• Liaison with relevant parties such as customers, service supervisor, coordinators and logistic pertaining to queries, technical issues, status and deliveries.
• Ensure equipment turnaround and breakdown responses are achieved at optimal level of efficiency.
• To participate/take up Workplace Safety & Health responsibilities/ activities as per requested by the company.

Job Requirements:

• NTC2 or Diploma in Electrical/Electronic/Process Instrumentation / /Mechatronics Engineering
• Preferably 3-5 years’ experience in service/engineering position in Oil & Gas / Process industry

Interested candidates do attach your resume to [email protected]

Attn: Angela Celeste Poh Li Ying (R2095367)

Recruit Express Pte Ltd (99C4599)

Rapsodo is a Sports Technology company with offices in the USA, Singapore, Turkey & Japan. We develop sports analytics products that are data-driven, portable and easy-to-use to empower athletes at all skill levels to analyse and improve their performance. From Major League Baseball star pitchers to Golf tour players, athletes use Rapsodo technology to up their game across the world. Trusted by coaches and players from youths to professionals, Rapsodo provides real-time insights for all-time performance.We are innovative, focused and rapidly growing. We are continuously looking for team players who will stop at nothing to deliver state of the art solutions as part of Team Rapsodo.

The Role:

We invite experienced C++ Software Engineers to apply as Senior Software Engineers with us. We value proactive problem-solvers with expertise in C++, who take ownership of their work and show dedication to ongoing learning and growth.Candidates who are adept at solving complex issues, especially those related to low latency or multi-threaded, are highly regarded at Rapsodo.

Responsibilities:

This role would be expected to:

• Be open to new concepts and ideas, demonstrate professional curiosity, and driven to succeed with a strong sense of ownership as a problem solver.
• Possess strong organizational skills, attention to detail, resilience, and adaptability in a dynamic environment
• Collaborate closely with Rapsodo's internal teams to ensure seamless integration of middleware solutions.
• Coordinate and execute middleware integration tasks across various technology platforms to support the development and deployment of sports data analytics solutions.
• Engage with a diverse range of applications and technologies, contributing to the dynamic and challenging nature of the role.
• Provide Tier IV and higher support for any outstanding technical issues.

Requirements

• Bachelor’s Degree in Computer Engineering or Computer Science-related discipline
• At least 7 years of work experience in a relevant role, with demonstrated prior experience in leading engineers in delivery end-to-end product development projects
• Demonstrate expertise in modern C++ and multithreading concepts, along with fundamental knowledge of Linux and Python / Bash scripting.
• Strong problem-solving skills with the ability to troubleshoot the most challenging technical issues effectively.
• Demonstrate a self-starting attitude with a strong desire to learn and an action-oriented approach
• Excellent teamwork skills and the ability to work cross-functionally.
• A background in Team Sports will be an added advantage!

The expansion of Ampcontrol has created a unique opportunity for a Communication Systems Engineer, based at our Singapore Operations.

You will execute the delivery of complete automation systems through design, software development, office testing, implementation, commissioning and modification.

As a Communication Systems Engineer, your solutions for automation and control system network design will help drive that advantage.

The following skills or experience would be advantageous:

• Experience in other PLC and SCADA platforms
• Extensive experience in the design and manufacture of electrical equipment and control systems
• Process control and automated systems knowledge
• Experience in working in Tunnelling industry

Your willingness to be hands-on and thrive in a specialised and changing environment will be complemented by the following:

• Diploma/Associate Diploma level qualifications in electrical engineering
• Schneider PLC and SCADA programming skills
• Competent in MS Office applications, with high level Word and Excel skills
• Demonstrated experience/understanding of electrical switchgear and control systems
• Demonstrated experience in resolving problems – electrical fault finding and PLC troubleshooting
• Control systems and network design

EMPLOYEE BENEFITS:

• Flexible work arrangements – remote working conditions will be considered.
• Paid parental leave
• Salary packaging
• Purchased leave
• Private Health
• Wellbeing programs and discounts
• Education assistance and personal career development

• Lead & own the process of preparation of design deliverables with due consideration for applicable codes and standards.
• Interface with Leads of other departments to reflect the as date input from other departments, as applicable
• Take ownership of deliverables producted & their quality
• Capture all changes/modifications in the deliverables that has been intimated by Project, prior to release of deliverable.
• Ensure appropriate checking & review of all documents/drawings before release at any revision status
• Work planning/forecast and effective utilization of manpower,progress monitoring and adherence to scheduled completion of engineering documents.
• control of quality for engineering documents regarding Quality assurance basis
• Keep project manager informed on progress of project, with agreed periodicity & milestones.
• Monitor budget compliance of design deliverable production
• Coordination with the other Engineering disciplines, client, and vendors .
• Perform System level evaluation, analyse faults/failures, and recommend solution.
• Manage and develop the engineering design work
• Appointed as SME for development engineering standards for the department.
• Coordinate with the drafting office on engineering drawings.
• Responsible for the quality of the engineering work and processes.
• Manage, control, and supervise the integration and engineering work for the projects.
• Recommend engineering solutions and alternatives to meet the project schedule, budget and quality.
• Prepare technical and design documentation and reports (Block Diagram, Bill of Material, Functional Design Specification, Termination Drawings, Calculation report, Cable wiring diagram...etc.)
• Develop system, Integration and simulation test requirements, planning acceptance criteria and perform testing
• Conduct product Factory and Site acceptance test with clients.

Benefits & Highlights:

• Location: Buona Vista / Bukit Merah
• Great employee benefit
• Weekly office lunches
• Reporting Line: Network Engineer Lead

Summary Requirements:

The Network Engineer / Infrastructure Analyst plays a critical role in ensuring the smooth operation of our IT infrastructure. You will monitor network performance, troubleshoot issues, and provide technical support to maintain optimal network availability and security.

The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The Network Engineer/Infrastructure Analyst role requires participation in a rotation shift schedule, which is ideal for those who enjoy starting their day early.

Main Objective:

Administration, monitoring, and support of computer infrastructure systems, services, and applications.

Essential Duties and Responsibilities:

• Network Monitoring: Proactively monitor network performance using various tools and systems to identify potential issues or anomalies.
• Troubleshooting: Diagnose and resolve network-related problems, including hardware, software, and connectivity issues.
• Incident Management: Respond to network incidents and projects in a timely and efficient manner, following established procedures and escalating issues as needed.
• Security: Implement and maintain security measures to protect the network from unauthorized access and threats.
• Documentation: Create and maintain accurate documentation of network configurations, procedures, and troubleshooting steps.
• Collaboration: Work closely with the Network and other IT teams to coordinate network changes, upgrades, and maintenance activities.
• Hands On: Ability to participate in Arthrex’s fast growing global footprint which may require domestic or international travel to racking, stacking, installation or replacement of network devices.
• Agility and Flexibility: Participate of schedule rotations that may include include weekend and holiday hours.

Education and Experience:

• Desired Bachelor's degree in Computer Science, Information Technology, or a related field with 1-3 years or experience.
• Understanding of network protocols, topologies, and technologies (e.g., TCP/IP, VLANs, routing, switching, wireless networks, etc).
• Experience with network monitoring tools (e.g., Logic Monitor, SolarWinds).
• Knowledge of network security best practices and tools (e.g., firewalls, intrusion detection systems).
• Entry level IT networking, cloud or scripting certification preferred.

Other Key requirements :-

• You must have the ability to comprehend and apply language skills to perform the job, work independently and as part of a team, and possess strong communication and interpersonal skills.
• The job requires you to perform physical tasks like talking, hearing, sitting, using hands and fingers, reaching with hands and arms, and occasionally lifting up to 50 pounds (~23kg). Reasonable accommodations will be provided for individuals with disabilities.
• You need to have the ability to define problems, collect data, establish facts, and draw valid conclusions. Excellent troubleshooting and problem-solving skills and a passion for continuous learning are essential.
• Visual acuity is necessary for safely and effectively performing the job.
• The work environment is typically a general office or open cubicle/workstation with moderate noise levels. Reasonable accommodations will be made to enable individuals with disabilities to perform essential functions.

Interested applicants are to apply online with us!