CHANG MIN ENGINEERING LOOKING FOR AN ENTHUSIASTIC CIVIL ENGINEER FOR THE UPCOMING PROJECTS.

• Perform preparation of design specifications
• Incorporate special features which relate to the project at hand into specifications. These include order of work, physical conditions at the site, construction work schedules, method of payment and measurement, construction procedures and special methods, and coordination with contractors and other stakeholders
• Perform technical review on specifications to ensure clarity, completeness, and exactness, and to remove restrictive descriptions so as to ensure competitive bidding
• Prepare project for advertisement by compiling contract specification into Electronic Bid Set (EBS)
• Visit proposed project site to obtain necessary information for use in creating project specification. This include condition and location of project site, location of storage and staging areas, and character and scope of work
• Provide guidance and technical advice to various persons and departments, including engineering personnel, Branch Chief, Section Chief, Engineering and Construction Department, and Architect-Engineer firms where necessary to develop basic specification procedure and policies to cover new types of projects and structures, and to make clearer various phases of the construction work
• Communicate with higher authorities on issues concerning specifications, engineering interpretations and explanations, supply of items, and items of work, and offer recommendations on reviewing specifications.

Requirements – Knowledge, Skills, and Abilities – for Civil Engineer Role

We are expecting the major requirements and qualifications the candidate should possess to be considered for the position:

• Minimum 4-year Bachelor’s degree in civil/construction engineering
• Strong skills in analysis and problem solving
• Solid understanding and ability to adhere to local, state, and federal guidelines and regulations
• Ability and willingness to travel frequently – for at least 40% of the time
• Strong ability to supervise tendering procedures and compile job specifications
• Ability to carry out effective technical and feasibility studies, as well as site investigations
• Ability to effectively monitor and drive project activities
• Ability to prepare safety and function analyses
• Possess strong organizational and site management skills to effectively coordinate site activities
• Ability to perform calculation, dimensioning, and control of concrete and metallic construction
• Profound ability to carry out safety analyses and stability and quality control
• Ability to effectively work with professionals from other fields, including subcontractors and architects
• Strong ability to plan and manage project resources and budgets
• Excellent in the use of relevant civil engineering software programs, including AutoCAD and Civil 3D
• Strong communication skills, including verbal and written

Conduct primary technical reviews of the contractors work and ensure approvals are obtained where relevant

Evaluate and advise on electrical related design changes and non-conformances to ensure fulfilment of the requirements

Identify new business opportunities and have involvement in bids/tenders etc

Provides guidance and direction on department design guides, standards, systems, applicable engineering codes and policies

Independently applies knowledge and complies with quality program relative to assigned tasks

Oversees collection, assimilation, and management of data for engineering work

May offer other services to the clients

Provide electrical engineering and technical expertise to ensure the safe and reliable operation of electric power systems in processing facilities worldwide

Originate plans and develop strategies for power systems worldwide to ensure electrical reliability and safety in the most cost effective manner

Participate in engineering design through all phases of the process

Preparation or supervision of drawings for plant general arrangements, power single line diagrams, cable block diagrams, instrumentation loop diagrams, P&IDs, control system architecture drawings, and cable, instrument and I/O schedules at detailed design level.

Some electrical design will also be required for integration and system development of electro-mechanical systems

Assist in design and documentation of vehicle electrical architecture

Develop Project Timelines in support of Program milestones

Development and Release of Engineering Component and Assembly Drawings

Resolve Test Issues and Document Through the use of the PDCA Process

Test and certification report generation

Provides electrical engineering and project management expertise in support of projects, to ensure stated quality, operational, safety, schedule and budget objectives are met

Provide training to electricians on safety

Ensure complete and current electrical prints for all machines

Maintain documentation for all electrical components used

Organize documentation and electrical prints

Design Circuit Card Assemblies (CCA) using Altium Designer for Schematic, and layout

A working knowledge of cost estimating, code review, field investigation, report and memo writing and other similar electrical engineering related tasks

Power distribution, essential power systems including generators and UPS, Substations, transformers, metering, primary and secondary switchgear, motor control and motor control centers Life Safety including Fire Alarm system design

Prepare reports, proposals, and tender/bid submissions, budgets, project plans and other supporting documentation as required

Develop standards related to our electrical engineering practice, ensuring best practices for project delivery, and when applicable sustainable building constructions

Lighting, Lighting Control systems.

Manage internal and external stakeholders - Support and run the commercial and contractual side of projects

Evaluates and test components

Ensures design, fabrication, maintenance and repair methods/processes are developed executed in a manner, which supports all quality standards

Develops, designs low voltage (600V) and medium voltage (15kV) and high voltage (115kV) electrical distribution systems for building, industrial and utility facilities

Performs electrical system design for switchgear, switchboards, motor control centers, variable frequency drives, generators, transformers, distribution panels and various raceway systems

Designs underground medium voltage distribution systems and sizes electrical low voltage (600V) and medium voltage (15kV) and high voltage (115kV) equipment

Serves as the Engineer of Record for drawings, specifications and reports prepared under their direction

Performs field investigations, field inspections and witnesses start-up/acceptance testing activities

Works effectively in a collaborative environment with Architects, Mechanical Engineers, Civil Engineers and Structural Engineers on large multi-discipline projects

Coordinates with Mechanical, Fire, Architecture, Structural and Civil disciplines for comprehensive building design or modification.

Provide instruction on electrical drawing and using AutoCAD electrical

Work with PCB Fabrications houses to develop the stack-ups, dieletric materials, routing guidelines, and any Design For Manufacturing (DFM) suggestions

Write AFCEs

Determine project specifications

Compare equipment and select manufacturer

Work with on-shift maintenance personnel to find and fix problems on down equipment

Engineer solution to fix root cause and prevent recurring failures

Create and conduct training, if required, to prevent future downtime

Design equipment upgrades to optimize machine performance

Estimate total project costs and estimate project payback

Responsible for designing, testing, supporting, and troubleshooting components of low-voltage and medium-voltage electrical systems operating up to several megawatts

Develop system-level and/or physics-based models of components and devices in support of new technology development, project engineering, and test & evaluation

Develop and/or improve the test methods and procedures

Write test procedures and technical papers

Responsible for the design, analysis, and testing of advanced power electronic systems for both military and commercial applications

Will lead and direct small technical teams (engineers, designers and technicians) in solving complex problems

Responsible for writing requirements, specifications, and design reports

Act as an expert and advisor in power electronics engineering and electrical engineering area

Advises and directs the activities of assigned programs and/or projects to achieve technical objectives

Responsible for digital and analog design with power electronics emphasis and must be able to do system level design and analysis

Requirement:

Degree in Electrical and Electronics Engineering.

Knowledge of international codes & standards IEC, ANSI / IEEE

Significant experience in the power generation industry strongly desired

Prepare Electrical Engineering deliverables such as calculations, equipment specifications, datasheet

Working knowledge of “AutoCAD” or equivalent CAD system, MS Project, and MS Office

Track record of launching high volume electronics products, especially low power platforms

Knowledge of the PCB design process and tools experience with Cadence or Altium products

Proficiency with EE lab instruments and their use in verification and troubleshooting

Experience with ODM, JDM, or CM models of product development

Self-starter and creative problem-solver

• Supply Chain Management / Procurement Exp
• Maintenance Industry / Electrical Spare Parts Exp
• Degree in Supply Chain / Business

Job Scope:

• Responsible for sourcing for direct / indirect materials, dealing with vendors and negotiating for the best price and payment term from local / overseas vendor
• Collaborate and maintain good working relationship with stakeholders and vendors, for planning and initiation of necessary procurement
• Liaison with vendors for timely delivery and monitor all purchases to avoid any shortages, overcharges and defects of materials
• Resolve supply, quality, service and invoicing issues with stakeholders, vendors and identify process bottleneck, propose and implement solutions to resolve issues in a timely manner
• Assist to implement internal procurement strategies
• Prepare, develop and review department contracts for new and existing supplier, and constantly monitoring the validity and expiry of each contract
• Prepare and develop various documentations (e.g. Tender, SOPs, Work Instruction, Reports, etc.) and monitor the validity & expiry of each documentation
• Assist as the System Administrator for section’s Maintenance Management System (MMS)
• Monitor and track Asset Life Cycle for planning of asset renewal and/or disposal
• Support Budgetary Planning and Costing
• Any other duties as assigned

Requirements:

• Possess a Degree in Business Admin / Supply Chain is preferred
• Possess 1 – 3 years of relevant working experience in Asset Management / Supply Chain Management / Procurement
• No experience are welcome and training will be provided
• Prior experience from equipment maintenance industry or with experience in electrical spare parts is advantageous
• Hands-on experience on Enterprise Resource Planning (ERP) Systems (e.g. ServiceNow, SAP, Maximo, Oracle) is advantageous
• Able to work well independently and in a team under a challenging and fast-paced environment

To apply please click on the APPLY NOW button or email your resume with the following details inside your resume for faster processing:

• Reason for leaving each past & current employment

• Salary drawn for each past & current employment

• Expected Salary

• Earliest availability date

We regret only shortlisted candidates will be notified. By submitting any application or résumé to us, you will be deemed to have agreed and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration.

Yoong Poh Feng

EA License | 14C7092

EA Registration Number | R1105076

• Strong understanding of DevOps principles and experience with CI/CD pipelines.
• Knowledge in source code management tools such as Git and GitHub, and experience with branching and merging strategies.
• Familiarity with containerization technologies such as Docker and Kubernetes.
• Experience in Cloud computing platforms such as AWS, including EC2, S3, Lambda, Glue and RDS.
• Good understanding of infrastructure as code principles and experience with tools such as Terraform or Cloud Formation.
• Experience in Level 2 issue troubleshooting.
• Knowledge in test environment setup and experience with tools such as Selenium or Postman.
• Knowledge in databases and SQL.
• Knowledge in networking protocols and services, such as DHCP, DNS, Firewalls etc.
• Experience in JVM development environment.
• Support RPMD applications.

Job Scope:

• Develop and maintain relationships with key clients and prospects.
• Identify customer needs and provide technical solutions that align with product offerings.
• Conduct product presentations and demonstrations to clients.
• Provide technical support and advice to customers during the sales process.
• Prepare and deliver detailed product proposals, quotations, and technical documentation.
• Collaborate with engineering and product teams to ensure customer requirements are met.
• Drive sales growth through direct sales activities and follow-ups.
• Negotiate terms and close sales agreements.
• Conduct market research to identify new business opportunities and market trends.
• Provide post-sales support and ensure customer satisfaction.
• Attend trade shows, conferences, and industry events to promote products and services.
• Track and report on sales performance, targets, and project progress.
• Ensure compliance with company sales policies, pricing strategies, and technical standards.
• Assist in the development of marketing materials and sales tools.

Requirements:

• Diploma/Degree in Electronics, Electrical, Engineering, Industrial, or Mechatronics
• No experience required, entry-level candidates welcome
• Passion for automation, creative and adaptive approach
• Good communication skills, able to explain technical concepts clearly
• Product training provided
• Knowledge of PLC programming, touch panels, control, and automation

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• Hands on experience in design, implementation of Splunk architecture.
• Experience on Linux and Windows administration
• Able to do data onboarding, fields extraction according to Splunk best practices.
• Able to provide Splunk guide and Splunk operation document
• Able to setup forwarders and onboard new data sources into the environment.
• Able to troubleshoot and identify Splunk issue relating to performance and searches.
• Able to fine tune Splunk use cases (rule) and optimize searches performance.
• Able to create new dashboard to enhance the visualization of the data and create Splunk use cases for alerts/reports.
• Knowledge on index segregation and user restriction setup
• Knowledge on using Splunk Enterprise Security
• Able to do Common Informational Model for Enterprise Security.
• Good in communication and able to understand the requirements.

• Monitor and review master construction program and preparation of catch-up program, if applicable.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical difficulties with Technical team.
• Preparation of detailed method statements and work instructions for construction.
• Coordinates between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Liaise with the Consultants on the submission related to structural works and Technical Department.
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.

Requirements:

• Degree in Civil Engineering or its equivalent
• Minimum 3 years of working experiences in construction industry.

· Checking plans, drawings and quantities for accuracy of calculations:

· Ensuring that all materials used and work performed are as per specifications:

· Liaising with contractors, supervisors, quantity surveyors and the general workforce involved in the project:

· Day-to-day management of the site, including supervising and monitoring the site labour force:

· Planning the work and efficiently organizing the plant and site facilities in order to meet agreed deadlines.

· Overseeing quality control, health and safety matters on site.

· Preparing VO and other reports as required.

· Other related duties, as assigned

Job Requirements:

- Diploma / Degree , related in Construction
- At least 1 year related working experience in Building Construction

- Bilingual in English and Mandarin in order to communicate and engage with Mandarin speaking customers.

- Willingness to learn & committed to accomplish datelines

Job Description

The professional services shall minimally consist of:

• Project Management
• Requirements Gathering and prototyping
• Technical / Application Architecture Design
• Technical specifications
• Support the setup and configuration of SUSS OutSystems cloud platform
• User Experience (UX) / User Interface (UI) Design
• Application Programming Interface (API) Design, Data Design
• Software customisation/configuration
• Code development, Unit Testing
• Integration and System Integration Testing (SIT)
• Support System Performance Testing
• Support Vulnerability Assessment and Penetration Test
• User Acceptance Testing (UAT)
• Data migration
• Go-live Implementation
• Project documentation, Training, Knowledge transfer, Warranty support

Requirements

• Must have 5 years of relevant working experience
• Must possess a bachelor's Degee in information technology

Job Requirement:

• Collaborating with management, departments and customers to identify end-user requirements and specifications
• Have a strong understanding of technical considerations and able to provide product feature requirements addressing to user needs
• Designing algorithms and flowcharts to create new software programs and systems
• Able to analyse requirements and work with minimal supervision, manages own time effectively, maintains control over current projects/responsibilities/tasks
• Producing efficient and elegant code based on requirements
• Testing and deploying programs and applications
• Troubleshooting, debugging, maintaining and improving existing software
• Compiling and assessing user feedback to improve software performance
• Observing user feedback to recommend improvements to existing software products
• Developing technical documentation to guide future software development projects
• Good communication skills and strong initiative to deliver results
• Coordinate with various stakeholders and project team members to make sure that Project is on track and assisted SP Project / Product Manager with project management monitoring
• tasks

Job Requirements:

• Experience in the field of software engineering, working with data structures, algorithms and systems design, and understand software development life cycle
• Experience in developing applications APIs and microservices using Java with frameworks such as Springboot and Spring WebFlux
• Experienced with Unix/Linux environments
• Experienced with integrating with Auth0 Identity Platform
• Experienced with integrating with Mulesoft API Platform
• Experienced with integrating with SAP PO
• Experienced with CI/CD using Jenkins
• Experienced with Docker, Kubernetes, Terraform
• Experienced with relational databases MSSQL & Postgres
• Must be qualified bachelor's degree in Information technology
• Must have more than 08 years of experience as Solution Architect
• Must have knowledge on the below skillset
• Backend Technologies
• Languages Java, PHP, Golang
• Frameworks Spring Boot, Node.js, Yii
• API Development RESTful Web Services, SOAP,Sprint, JUnit, WireMock
• Frontend Technologies
• Languages JavaScript, HTML, CSS, SCSS
• Framework / libraries: ReactJS, AngularJS, React,Native, Sencha Touch, Ionic,ExtJ
• Databases
• Relational DB MySQL, Oracle
• NoSQL DB Redis

• Location: Labrador Park

• Working hours: 8.30 - 17:30

• Salary: AWS + VB provided

Application Engineer

Our client, known for its memory products, is looking for a professional who can contribute and support effectively to the team.

Job responsibilities:

• Product promotion and technical support to customers, including regional customers
• Conduct product presentations and training sessions to showcase product capabilities and features
• Prepare technical proposals and collaborate with sales and follow up customer project coordination
• Develop and evaluate hardware/software solutions for memory products
• Collect and analyze market data to identify industry trends and prepare reports
• Liaise with headquarters to resolve technical issues and propose solutions
• Understand and analyze customer requirements, recommending new products or system solutions

Job Requirements:

• Bachelor’s Degree/Diploma in Engineering (Electrical/Electronic) or equivalent
• Prior experience in a similar role is an advantage
• Knowledge of memory system design, development, architecture
• Strong analytical and problem-solving abilities with excellent communication and sales/marketing skills
• Practical experience with product development and system architecture in storage solutions

Interested applicants, please send your resume to Charlene (R22105303) at [email protected] with the email subject header "Application Engineer".

We regret that only shortlisted candidates will be notified. Other applications will be updated in our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Please find our Privacy Policy Agreement in the below link.

http://www.pasona.com.sg/privacy.html

Thank you for your kind understanding and co-operation.

Pasona Singapore Pte Ltd

EA License No:90C4069

(Lau Rui Lin, Charlene, EA Registration No: R22105303)

Job Scope:

• Oversee day-to-day site activities to ensure project progress aligns with the schedule.
• Supervise construction work to ensure compliance with design specifications and safety standards.
• Manage site resources (materials, labor, and equipment) for efficiency and cost-effectiveness.
• Provide technical guidance to the construction team and resolve on-site technical issues.
• Inspect construction work to ensure adherence to quality standards and project specifications.
• Enforce health, safety, and environmental regulations on-site.
• Conduct site inspections, risk assessments, and safety audits.
• Liaise with project managers, contractors, and subcontractors to ensure smooth project execution.
• Maintain accurate site records, including progress reports and documentation of issues.
• Coordinate deliveries of materials and ensure proper storage on-site.

Requirements:

• 2-3 years' experience in construction
• 1 year MRT experience
• Minimum 2 years' experience in underground/tunneling projects
• Experience with diaphragm walls and bored-piling
• One position must have lifting engineer certification or relevant experience

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

BMS, Building Management System Engineer x 1

5 day week. Attend site rectification, able to work from home if site does not require.

Job Description

• Programme DDC panel
• Well verse in digital and analogue systems.
• High level interfacing with various communications. Modbus, IP, etc.
• Control, monitoring, systems.
• Hvac control, Electrical control, Power usuage
• Attend to fault call.
• Good troubleshooting skill and experience

Dip/ Degree in Engineering

Good understanding and hands on experience in programming of BMS systems is a MUST.

The Job

You will join the Manufacturing Section which is equipped with the latest manufacturing technology and advanced engineering control, and lead the technicians to achieve smooth and safe plant operation and provides technical support for shift operation, process optimization and quality conformance.

The Daily

• Lead a group of Production Technicians in the safe and smooth running of the production.
• Assist the Process Engineer to conduct activities and projects to optimize operation during Shift to achieve operational and cost efficiency.
• Troubleshoot plant/equipment/quality issues and recommend countermeasures.
• Monitor and ensure plant equipment integrity and reliability.
• Assist the Process Engineer to support Shift operation by providing suitable operating conditions for stable plant operation and product quality control.
• Train and develop team members.

The Essentials

• Possess Degree in Chemical Engineering or its equivalent, preferably with 1 to 2 years of experience in petroleum, chemical or polymer industries.
• Have knowledge of process control and troubleshooting, hands on knowledge of plant equipment and instrumentation.
• Essential prerequisites include good analytical and technical report writing skills, ability to be a team player with leadership, initiative, drive & commitment, able to take pressure and able to communicate well with others.
• This is a shift work position (i.e. Rotating AM and PM shifts, including weekends and Public Holiday) and there will be scheduled off days.

• Responsible for corrective and preventive maintenance of plant machinery and monitoring of critical spare parts.
• Carry out corrective maintenance on plant machines.
• Support on preventive maintenance and machine repair.
• Attend to machines installation, modification, safety items, laboratory equipment, etc.
• Identify and carry out improvement items for machines.
• Liaise with machine agents for repair or maintenance of machines.

Requirements:

• Degree in Electrical/Electronic or Mechanical Engineering
• Prefer 2-3 year(s) of experience in maintenance/repair of machine in a manufacturing environment.
• Good trouble shooting, presentation and analytical skills.
• Good knowledge of PLC programming skills.
• Self-disciplined, independent and able to work under pressure.
• Able to communicate with all levels of staff.
• Able to commit to 12 hours shift work.

Manufacturing Industry

Loyang Area

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd

License No : 06C3745

Audris Teo/ EA Personnel No: R1102063

As a Senior Equipment Engineer/Equipment Engineer in the NTI, you will be expected to support R&D activities associated with rapid deployment of First-of-Kind equipment, the CIP hardware evaluations and managing on the timeline needed to deploy in current technode/next advance technode on time. Good team spirit and good collaborations working is needed with various stakeholders including (not limited to) facilities/fab support/Gas & Chemical/EHS/F4/F10/Central team etc with various equipment setup and improvement work necessitated thereof as well as to ensure extended engagement with F4 on the upcoming First-of-Kind equipment in upcoming technode. Expected to work independently with minimal direction and complete projects in a timely manner and achieve set objectives.

Responsibilities
• Install equipment and/or CIP hardware for evaluation by the process development team to enable early introduction, maturity, and adoption for current and next node of 3D NAND technology.
• Work with the Fab layout and facility team to ensure smooth and on time installation and operation of the equipment.
• Work with process development team to quantify benefits of equipment/CIP hardware.
• Develop and optimize existing equipment hardware to meet the productivity requirements of advanced 3D NAND parts.
• Participate with Boise TD equipment development peers on technology choices for the upcoming nodes and able to translate future technology needs into clear equipment requirements.
• Identify disruptive equipment early, work with manufacturing and Boise TD to identify viable evaluation path forward in manufacturing.
• Design and implement advanced equipment monitoring and control methodologies.
• Lead team or sites or suppliers on complex projects in focused meetings with end goal of maturity an equipment technology in record times for technical advantage, cost and productivity.
• Serve as a technical expert within Micron, provide advice and recommendations to senior management on improvements from equipment development. Lead and initiate innovation projects through patents/technical papers.
• Identify and resolve safety hazards; follow safety procedures including lockout, chemical safety, lifting techniques and ergonomically correct methods.

Requirements:
• A minimum of 2-3 years of experience in the semiconductor industry in the area of equipment engineer roles.
• In-depth understanding of the equipment operation, working principles, troubleshooting and tool installation procedure is a must.
• Exposure to R&D equipment transfer and ability to develop/optimize equipment hardware design is preferred.
• Communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Self-motivated and adaptable to Micron’s fast paced, demanding and dynamic work environment; flexibility to work for extended hours, as required.
• Excellent oral and written communication skills with ability to convey the message clearly and sharply both locally and globally.
• Excellent ability to prioritize and manage multiple projects simultaneously; efficiently utilize available resources or seek peers’ and/or management help to get over the roadblocks to drive to solutions.
• Encourage and enforce safe, compliant behavior through periodic communications and the performance management process.

GJS for this position: E2 and above
Location: Fab10N
Closing Date: Until filled

As a NAND CMOS Device Engineer, you will help set the direction for current and future CMOS technology for Micron’s NAND Memory Technology Roadmap!

You will work with the Design Team to set electrical targets and define transistor structures to meet these targets. You will guide the device technology development and be in close relation with Process Integration, Design Engineering, Design, Design Rules, Reliability, Transistor Modeling, TCAD (Technology Computer-Aided Design), and Parametric Test, to name a few! In addition, you will ensure that the developed technology is manufacturable and highly yielding and that these considerations are designed into the technology from the start.

Together with your peers, you craft and implement our NAND-CMOS roadmap and make sure to align to product roadmaps

• You give directions on how to improve our device portfolio, both in performance and cost effectiveness
• You define, execute, and analyze silicon experiments for future device generations
• Interface with Design Engineers to define transistor targets, deliver transistor models, and optimize critical layout constrained Design Rules
• Work with TCAD simulation group to develop strategies for transistor structures to meet targets
• You strive to ensure that transistor models are correctly targeted to anticipate final silicon
• Define electrical test structures for transistors, isolation, design rule verification, and process monitoring
• Highly motivated to ensure transistors are developed meeting the required reliability standards
• You take initiative to collaborate with Manufacturing to ensure transistors are performing as expected and to debug yield/reliability issues
• You foster and enable a collaborative working style and team spirit by mentoring less experienced colleagues

Minimum Qualifications:

• MS/PhD in Electrical Engineering or related field, PhD in Semiconductor Device Technology preferred
• 5 plus years industry experience in the field of CMOS device design, simulation, characterization
• Experience in developing advanced logic transistor technologies
• Experience in developing Analog FETs operating at higher Voltages
• Preferred: Experience in the field of High Voltage applications, reliability, characterization, device development
• Understanding of analog design concepts
• Good presentation skills
• Excellent team and mentoring skills

Develops new or modified process formulations, defines processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products. Involvement may begin at any step from pilot plant to full-scale manufacturing. Coordinates design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods. Compiles and evaluates test data to determine appropriate limits and variables for process or material specifications. May conceive and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes.

Job Responsibilities:

• Provide assistance with maintenance projects.
• Manage system administration, network support, implementation, and troubleshooting across Windows, Linux, and Unix systems.
• Hands-on experience in managing LAN, WAN, routers, switches, DNS, VPN, and firewalls is preferred.

Requirements:

• Minimum Diploma or Degree in Engineering (Electrical/Electronic), Computer Science/Information Technology, or a related field.
• A team player with strong communication and interpersonal skills.
• Capable of working independently with minimal supervision.
• Willing to participate in a rotating schedule for standby duties.

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).
Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Nyon Hock Sen
EA Personnel Reg No: R24124070

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a E&I Engineer to assist their E&I team for the next phrase of their business. They are located in South – easily accessible.

Duties of E&I Engineer:

• Review project specs to ensure equipment meets contract requirements
• Prepare and approve instrument and electrical deliverables (e.g. wiring diagrams, lists, data sheets)
• Create material requests and evaluate bids for electrical and instrument equipment
• Develop engineering standards and procedures for design
• Monitor project costs and schedules
• Attend technical meetings and address client feedback
• Support plant start-up and on-site troubleshooting
• Provide technical support and estimates to the sales team
• Advise engineers and Project Managers
• Follow company health and safety guidelines

Requirements

• Minimum Degree in Engineering/ Electrical or equivalent
• Minimum 5 years of relevant experience
• Familiar with key engineering concepts and practices
• Strong organizational and multi-tasking skills
• Excellent problem-solving and analytical abilities
• Proficient in Microsoft Office, Microsoft Project, and AutoCAD
• Strong verbal and written communication skills
• Able to work independently with attention to detail
• Good teamwork skills
• Knowledge of hazard area classification
• Fluent in English (speaking and writing)

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

EA License No: 19C9682

EA Personnel No: R21101676

EA Personnel Name: Ng Zhi Qing Alethea

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 12 months
• Start from: January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of Hospital and Architecture work
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Create software solutions for automated Computer Vision Equipment.
• Develop software for GUIs, manage large datasets, and implement multi-threaded programming.
• Design and implement Image Processing and Computer Vision Algorithms, contributing to the Software Development Life Cycle.

Requirements

• Skilled in Visual Studio programming and proficient in C++.
• Expertise in vision inspection, computer vision, and image processing.
• Familiarity with C# and experience in Deep Learning for Defect Classification are advantageous

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Position title : Vision Software Engineer

Location: Admirality Street
Working Days: 5 Day A Week
Working hours : 9:00am - 6:00pm
Salary : $5000 - $8000 (depends experience)

Job Summary:

We are seeking an experienced Software Engineer to join our team, responsible for
designing, developing, and maintaining software applications for vision systems.

Responsibilities:

• Design and develop PC based automated visual inspection systems for our full range of semiconductor equipment.
• Evaluate and feasibility study on the customer’s vision specifications.
• Responsible to integrate any new vision hardware (camera, frame grabber, etc) onto the vision software.
• Troubleshooting and improve the processing time of the inspection.
• Provide technical support to internal and external customers to fulfill the inspection requirements. Change the vision inspection algorithm to improve the inspection capabilities and its performance.
• Be the key driver for continuous improvement plans for new and existing inspection capabilities.
• Coordinate with customer for any new enquiry with sale personnel if needed.
• Work closely with the vision application and optics team members to produce the best inspection result.
• Build and nurture a culture in engineering organization of harmony, quality, ownership, collaboration, continuous improvement and data-driven decision making.

Requirements:

• BS Science Diploma or higher in electrical and electronic, mechanical, or mechatronics engineering or related technical discipline or equivalent practical.
• Technical troubleshooting experience.
• Minimum 3 years in related field.
• Relevant technical work experience including automation machine system troubleshooting.
• Experience working with end customers.
• Understanding semi-conductor manufacturing process, vision inspection settings, machine software settings and configuration or equivalent practical experience.
• At least 3+ years of experience in software development with C#, WPF, Image Processing , Halcon (bonus)

✅The Supreme HR Advisory Pte Ltd EA No: 14c7279

✅SAMUEL SIAW Reg No: R24124745

As a Senior Equipment Engineer/Equipment Engineer in the NTI, you will be expected to support R&D activities associated with rapid deployment of First-of-Kind equipment, the CIP hardware evaluations and managing on the timeline needed to deploy in current technode/next advance technode on time. Good team spirit and good collaborations working is needed with various stakeholders including (not limited to) facilities/fab support/Gas & Chemical/EHS/F4/F10/Central team etc with various equipment setup and improvement work necessitated thereof as well as to ensure extended engagement with F4 on the upcoming First-of-Kind equipment in upcoming technode. Expected to work independently with minimal direction and complete projects in a timely manner and achieve set objectives.

Responsibilities
• Install equipment and/or CIP hardware for evaluation by the process development team to enable early introduction, maturity, and adoption for current and next node of 3D NAND technology.
• Work with the Fab layout and facility team to ensure smooth and on time installation and operation of the equipment.
• Work with process development team to quantify benefits of equipment/CIP hardware.
• Develop and optimize existing equipment hardware to meet the productivity requirements of advanced 3D NAND parts.
• Participate with Boise TD equipment development peers on technology choices for the upcoming nodes and able to translate future technology needs into clear equipment requirements.
• Identify disruptive equipment early, work with manufacturing and Boise TD to identify viable evaluation path forward in manufacturing.
• Design and implement advanced equipment monitoring and control methodologies.
• Lead team or sites or suppliers on complex projects in focused meetings with end goal of maturity an equipment technology in record times for technical advantage, cost and productivity.
• Serve as a technical expert within Micron, provide advice and recommendations to senior management on improvements from equipment development. Lead and initiate innovation projects through patents/technical papers.
• Identify and resolve safety hazards; follow safety procedures including lockout, chemical safety, lifting techniques and ergonomically correct methods.

Requirements:
• A minimum of 2-3 years of experience in the semiconductor industry in the area of equipment engineer roles.
• In-depth understanding of the equipment operation, working principles, troubleshooting and tool installation procedure is a must.
• Exposure to R&D equipment transfer and ability to develop/optimize equipment hardware design is preferred.
• Communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Self-motivated and adaptable to Micron’s fast paced, demanding and dynamic work environment; flexibility to work for extended hours, as required.
• Excellent oral and written communication skills with ability to convey the message clearly and sharply both locally and globally.
• Excellent ability to prioritize and manage multiple projects simultaneously; efficiently utilize available resources or seek peers’ and/or management help to get over the roadblocks to drive to solutions.
• Encourage and enforce safe, compliant behavior through periodic communications and the performance management process.

GJS for this position: E2 and above
Location: Fab10N
Closing Date: Until filled

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a QC Coordinator Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Responsibilities:

• Conduct quality control audits.
• Organize pre-inspection meetings with clients.
• Create Project Inspection and Testing Plans.
• Draft Project Inspection and Testing Procedures.
• Address client feedback on QC documents.
• Coordinate and schedule QC activities, including inspection notices and factory acceptance tests.
• Manage coordination and scheduling of QC procedures, reports, and documents.

Requirements:

• Minimum of Bachelor Degree in Engineering or Quality Management
• Minimum of 5 years experience in Quality Control function.
• Experience in the Oil and Gas or offshore and marine industry
• Proficiency in metal welding inspection and piping system testing and inspection

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

• Performs inspections, testing and troubleshooting on electrical & mechanical of marine hydraulic systems.
• Performs preventive maintenance procedures on equipment.
• Carry out repairs on various marine products, both mechanical & electrical systems on Marine and offshore installations.
• Prepare reports from attended jobs.
• Participate in vessel dockings and work at shipyards.
• Adhoc duties as assigned.

Requirements:

• Diploma in Mechanical/ Electrical or Marine Engineering.
• Knowledge in PLC based control systems and/or Hydraulic systems.
• Automation or instrumentation experience an advantage
• Prefer 2-3 years of experience in Marine Hydralius System.
• Possess good initiative, customer oriented and action oriented.

West/Tuas Area (Tpt Pick up at CCK MRT /Boon Lay Mrt)

5 days work week

European MNC

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd

License No: 06C3745

Attention: Audris Teo / EA Personnel No: R1102063