• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply
• Entry level / Junior / Senior / No experience welcome apply X 3 Opening
• Full training provided

Responsibilities:

§ Project execution and implementation activities for energy monitoring systems projects.

§ Co-ordinate site staff and plan site activities for ongoing and maintenance projects.

§ Record and maintain proper project documentation record

Requirements:

§ Diploma/Degree in Electrical/ Electronics/ Computer Engineering / Computer Science from a recognised Polytechnic/University

§ Preferably with experience in Energy Monitoring System

§ Our benefits and compensation for permanent position are as follows:

§

§ Salary for experience candidates will be considered based on the years of experience and our internal salary structure

§

§ 1 month AWS

§ Variable Bonus ranging from 1 to 6 months depending on individual and company performance

§ Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

§ Working days: Monday to Friday (1 day work from home per week)

§ Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

§ 18 days up to 21 days for executive (Engineer and above)

§ Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

§ Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

§ Term Life

§ Personal Accident

§ Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

§ Flex Dollars of $500 per financial year

§ Free annual year-end Health Check-Up

§ Monthly Birthday Party Celebration

§ Monthly Sports Activities

§ New Born Gift

§ CSR Initiatives

§ Department Bonding Activities

§ Biennial team building and staff appreciation dinner

§ Gym Corner for employees to exercise

§

§ Good Pay + Good allowance + Good Bonus

§ Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

§ Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Our client is a Science Industry. Due to their current expansion plan, they are looking for a Site Support Specialist (Inventory Management) to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities:

• Manage delivery of laboratory supplies (consumables, chemicals, reagents) from suppliers to customer stockrooms and points-of-use
• Perform goods receipt in ERP systems upon receiving supplies
• Monitor and adjust stock levels based on usage data, ensuring timely replenishment
• Conduct inventory checks to ensure products are within recommended levels and not expired
• Deliver supplies to customers' work areas reliably
• Provide site support for inventory management services as per customer requirements
• Maintain cleanliness and organization in stockroom and point-of-use areas

Requirements/Qualifications:

• ITE or Diploma in Science or related discipline
• Experience with ERP systems and logistics preferred
• Intermediate proficiency in Microsoft Office

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

R24122162 | LAI CHAI LI

Responsibilities:

1. Set up and configure PCs and laptops for users.
2. Install software and assist with mobile device configurations for Outlook and Microsoft Teams.
3. Troubleshoot and resolve hardware and software issues for users onsite and remotely.
4. Perform preventive maintenance for office and shop floor PCs, including CMM systems.
5. Manage patching and Windows updates using Ivanti for all devices.
6. Collaborate with vendors to resolve IT hardware and software issues.
7. Maintain IT inventory and documentation for installations and network setups.
8. Handle Active Directory management and assist with urgent IT tasks as needed.

Other Information

• Proficient in Office 365 and MFA applications.
• Strong communication skills, both technical and user-friendly.
• Self-motivated with a focus on detail and customer service.
• Effective project management and problem-solving abilities.
• Team player, able to thrive in fast-paced environments.
• Previous experience in customer support.
• Diploma in Information Technology and 2-3 years in Level 1 & 2 technical support.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified

Interested applicants may send their resume to [email protected] or click APPLY NOW

Talentvis Singapore Pte Ltd | EA License No: 04C3537
EA Personnel Name: Ong Hui Shan (Gwen) | EA Personnel No: R1767800

Our client is a Science Service Provider. Due to their current expansion plan, they are looking for a Scientific Support Specialist to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities:

• Execute and qualify routine validated test methods on finished products, special projects, or specified testing in accordance with Standard Operating Procedures (SOPs).
• Record and submit all technical data into the work request management and submission system.
• Perform all tasks in strict compliance with the organization’s safety and quality standards.
• Follow work assignments provided by the Team Leader.
• Monitor, replenish, and manage laboratory samples, consumables, and reagent inventory.
• Accurately maintain and update equipment records and documentation.
• Conduct daily laboratory cleaning and perform routine equipment maintenance.
• Immediately report any product testing deviations, equipment malfunctions, or other laboratory issues to the Team Leader.

Job Requirement:

• Diploma in Sciences or Engineering.
• 0-1 year of laboratory experience with the ability to perform test methods efficiently and accurately.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

LAI CHAI LI | R24122162

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Technical Sales Engineer
• Working Location: Woodlands
• Working Hours: 5 days (Monday to Friday, 8.30 am – 5.30 pm)
• Salary Package: Basic up to $6,500 + Commission + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Collaborate with the sales team to achieve or exceed a minimum monthly sales target of $100,000, using a three-month average for fluctuation adjustments.
• Assist in servicing customers by conceptualizing machine processes and drafting proposals and quotations.
• Support the Project Manager in capacity planning to ensure project timelines are met, using a Master Project Schedule.
• Monitor projects to ensure goods are delivered on time.
• Engage in new business development initiatives across various industries.
• Manage public relations activities, including liaison with overseas partners and customers.

APPLY NOW!!!

• Diploma or higher in any discipline.
• Minimum of 3 years of experience in Manufacturing Automation Machines.
• Proficiency in CAD software and common Microsoft software is essential.
• Willingness to travel frequently as required.
• Possession of a Class 3 driving license is an advantage.
• Owning a vehicle is preferred, with car allowances provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67301 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Clinic Assistant | Receptionist & doctor Support |Up to $2.8k | 5 Days | Multiple locations

Working Location: Marine Parade (5.5Days) , Bishan (5days) , Orchard (5 Days)
Working Timing: Mon – Fri (9am-5pm), Only Tue & Fri need to work till 7pm
Starting Salary: $2,500 -$2,800 (Based on Experience)

About Us:
We are dedicated to providing exceptional Vision Care in a warm and welcoming environment. Our team of skilled professionals is committed to enhancing the vision and overall eye health of our patients. We believe that a positive, fun-loving atmosphere contributes to both staff satisfaction and excellent patient care.

Key Responsibilities:
Patient Care and Interaction:

• Greet patients with a friendly and professional demeanour, ensuring a positive first impression.
• Assist patients with the completion of necessary forms and paperwork.
  Schedule and confirm patient appointments, handling any necessary rescheduling or follow-up.
• Provide information to patients regarding procedures, treatments, and eye care products.

Clinical Support:

• Prepare examination rooms for patient visits, ensuring cleanliness and readiness.
• Assist ophthalmologists and optometrists with various diagnostic tests and procedures.
• Perform preliminary tests, such as visual acuity tests and ocular pressure measurements, under the supervision of eye care professionals.
• Maintain and sterilize medical equipment and instruments according to clinic protocols.

Administrative Duties:

• Handle billing and private/corporate insurance claims, including verifying insurance information and processing payments.
• Order and stock medical supplies, ensuring adequate inventory levels.
  Manage emails and Whatsapp Hotlines enquiries.

Team Collaboration:

• Work closely with other clinic staff to ensure efficient workflow and patient satisfaction.
• Provide support and assistance to colleagues as needed, fostering a collaborative work environment.
• Able to travel to different branches (Transport fees will be compensated).

Qualifications:

• Minimum O-Levels Certification
• With Relevant Experience
• Able to support different outlet when needed
• Proficiency with office software and basic medical equipment.

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

Working Location: Jurong
Working Days : 5 Days ( Mon- Fri)
Working Hours: 8am-5pm

Salary: $2600 - $2700

Job Description

• Desktop Technician will provide day to day local\remote desktop support, receive inbound calls, answer questions, troubleshoot and document steps performed to resolve challenges with hardware, software and application issues in a ticketing system.
• Facilitate customer resolution for calls and engage their supervisors and managers to ensure operational consistency across all shifts within the IT Support Center.
• Desktop Support Engineer provides Break Fix, fault diagnosis and resolution.
• Providing fault analysis to customer’s various core operating systems and platforms, as well be able to provide support and apply desktop fault resolution for the approved application suite.

Position Responsibilities and Functions

• Provide first/second level contact and problem resolution for customer issues.
• Work with Third Party Vendors to remediate complex AV issues as needed.
• Provide timely communication on issue status and resolution.
• Maintain ticket updates for all reported incidents.
• Install, upgrade, support and troubleshoot XP, Windows 7, Windows 8.1, Windows 10 and Microsoft Office 2010, Cisco Jabber, another authorized desktop application.
• Should have basic knowledge of Mac operating system, to support Apple pc users.
• Install, upgrade, support and troubleshoot for printers, computer hardware.
• Performs general preventative maintenance tasks on computers, laptops, printers.
• Performs remedial repairs on Desktops, laptops, printers and any other authorized peripheral equipment.
• Use diagnostic tools to troubleshoot problems associated with network connectivity, and workstation hardware/software.
• Broad experience of IT with basic understanding of Networks, Servers, Audio/Visual, Smart Devices and Telecoms.
• This position requires the ability to work in a project-based environment requiring flexibility and teamwork. Performs other duties as assigned.

Qualifications and Skills

• Bachelor Degree or equivalent in Computer Science or related field.
• CompTIA A+, Microsoft Certified Professional (MCP) or better.
• 1-2 years’ experience in Windows Desktop support.
• Windows 7-10, Microsoft Active Directory, utilization of GPOs, MS Office 365, PC hardware installation and troubleshooting, Enterprise anti-virus solutions, Helpdesk ticketing systems.
• Mobile device management including IOS and Android devices, Enterprise encryption solutions, Windows PC/laptop management via Active Directory.
• Proven analytical, troubleshooting and problem solving skills.
• Willing to work off-hours and weekends when required for projects or emergency support.

✅The Supreme HR Advisory Pte Ltd EA No: 14c7279

✅SAMUEL SIAW Reg No: R24124745

The Role:

Planning and Preparation: Collaborate with project managers and other stakeholders to plan installation activities, including scheduling, resource allocation, and site preparation.

2. Equipment Inspection: Inspect equipment or systems prior to installation to ensure they meet specifications and are in proper working condition.

3. Site Assessment: Conduct on-site assessments to evaluate installation requirements, including space constraints, access points, and safety considerations.

4. Installation Supervision: Lead installation teams, providing guidance and direction to technicians, contractors, and subcontractors to ensure efficient and safe installation processes.

5. Assembly and Configuration: Assemble and configure equipment or systems according to manufacturer guidelines and technical specifications, ensuring proper alignment, calibration, and functionality.

6. Testing and Commissioning: Conduct tests and commissioning activities to verify the functionality and performance of installed systems, troubleshooting any issues or discrepancies as needed.

7. Quality Assurance: Implement quality control measures to ensure installations meet company standards and customer requirements, conducting inspections and audits throughout the installation process.

8. Compliance and Safety: Ensure compliance with relevant regulations, codes, and safety standards during installation activities, promoting a culture of safety among installation teams.

9. Documentation: Maintain accurate records of installation activities, including documentation of materials used, work performed, and any deviations from the original plan. Prepare reports for project managers and clients as required.

10. Customer Satisfaction: Ensure customer satisfaction by delivering installations that meet or exceed expectations, addressing any concerns or issues promptly and professionally.

The Requirements:

1. Candidates with Railway experience will be preferred.

2. Minimum 1 year experience in installation of electrical and communication infrastructures.

3. Diploma in Electrical/Mechanical Engineering or its equivalent, preferred.

4. Team player with good interpersonal and communication skills.

5. Willing to work outside of prime office hours as required.

6. Self-motivated and Service oriented.

7. Able to work independently with minimum guidance.

To Apply:

Please send your latest CV in word file to [email protected]

Kindly indicate your availability, current and expected remuneration package.

We regret that only shortlisted candidates will be notified.

For more job opportunities, please visit our career page: http://quinnox-solutions.com/c...

Quinnox Solutions Pte Ltd (License Number: 06C3126)

Registered EA Personnel (Reg. No.R21103082)

Role：

Automation Engineer (Siemens PLC)

• Singapore Based (Changi)
• 5 Days work per week (9am to 6pm (may need go back office if need any support))
• $3500 to $5000
• Diploma / Degree in an engineering discipline + Minimum 3 years of experience in manufacturing industries with an automation background.
• Required hands-on experience and remote support + Need strong foundation in Siemens PLC and / or Fanuc robotics.
• A proven record of accomplishment in automation work will be advantageous.
• Career Progression Opportunities

Key Responsibilities:

General Equipment

Identifies or addresses malfunctions of plant operational equipment. Proactively involved in identifying the defects in the operational equipment and finding out ways in which can be rectified.

Monitors plant equipment operation and performance, adjusting to performance specifications.

Communicates the status of operating equipment to production supervisors or managers.

Maintain logs and reports. work requests, or other records of work performed in the plant.

propose improvements to prevent the re-occurrence of trouble, and target set not more than 3 times similar incidents.

Coordinate with all contractors/supplies for in-house periodic maintenance including plant facilities and repairs.

PLC & Software

Able to read and write Siemens S7 PLC & HMI codes.

Knowledge of serial communication.

Knowledge of programming languages

Other Operational Duties

Maintain proper documentation

Housekeeping of spare parts, tools, and accessories.

Initiate and participate in continuous improvement projects

As assigned by Managers.

Competencies

Electrical design and drawing.

Install, calibrate, program modification, operate, and simulate the industrial Robot such as FANUS using Siemens S7 PLC, and HMI.

Work with Suppliers and Vendors to determine the selection of proper components.

Perform installations/commissioning of machine/robot.

Travel:

Travel for this position is up to 30%.

#SCR-vicky-wee

✅ Wee Yuan Huan
✅ Reg No: R21100383
✅ The Supreme HR Advisory Pte Ltd
✅ EA No: 14C7279

Min 2 yrs. of SD agent working experience

Good Laptop/Desktop troubleshooting skillsets

Excellence customer handling skills

Excellence communication skills

Furnish and submit timely updates to customers on the status of outstanding issues within targeted Service Level

Maintain ownership of cases and follow-up on reported issues until closure and gather accurate and complete relevant information is recorded.

Manage customer expectations and notify Team Lead in the event of unusual surge in calls of a specific nature.

Handle initial classification/ prioritization of the incidents. Track the progress of resolution and provide regular updates for follow-up actions and incident status.

Our client delivers a broad array of solutions and services, featuring IBMS, Smart Facility Management, IoT and Data Analytics, ELV Systems, as well as Network Infrastructure and ICT solutions.

• Perform testing of DCS/DDC/PLC with SCADA software.
• Conduct the communication test for Devices using different protocol.
• Arrange and submit documents and report as per the requirement.
• Ensure timely completion of commissioning activities.

Requirements:

• Diploma in Electrical Engineering or equivalent
• At least 2 years of experience in Industrial/Process automation, building ACMV systems for Built Environment Projects.
• Experience in building management systems will be advantageous.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected].

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Our client is a global provider of intelligent automation and integrated security management solutions.

• Responsible in project management, implementation and maintenance services of security system, including system design, system configuration and coordination works.
• Work closely with other departments, including design, procurement, and installation teams.
• Verify that engineering tasks are aligned with the overall project timeline and objectives.

Requirements:

• Diploma in Electrical Engineering or equivalent
• At least 2 years of Security System Installation experience.
• Knowledge in Computer/Network/Security/ELV/Electrical System.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Provide supervision services for all M&E works to ensure that contractors complies with contract/authorities'/agencies' requirements
• Oversee the M&E team and personnel
• Review all drawings and specifications and highlight any discrepancies, non-workable and/or missing details to OIC and the QP(D)s and QP(S)
• Review and comment on all construction method statements, risk assessmentsfor works, workplans, design for safety (DfS) workshop and SOP proposals
• Evaluate technically any claims submitted by main contractor and submit recommendation to the Superintending Officer
• Provide all relevant endorsements required by authorities/agencies/client
• Assist QPD for application of TOP and CSC
• Prepare site supervision plan and supervise all works directed by OIC
• Monitor project progress to ensure timely completion and prepare necessary site progress and status report for update to client
• Adhere to regulations and requirements of all stakeholders for any supervision work while ensuring proper supervision
• Report any accident/incident/near miss on site

Requirements

• Accredited with Resident Engineer certification under Joint Accreditation Committee of the Institution of Engineers Singapore
• Minimum 10 years of experience , of which at least 8 years in major construction works in buildings, services laying and testing and commissioning
• A Mechanical and Electrical Engineering degree recognised by the PEB of Singapore
• Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress report
• Licensed electrical worker and licensed plumber are preferred

• Report to QPS and QP (Geo) on all design matters
• Ensure that the contractor's design are in compliance with LTA's specifications and requirements
• Assist to check on the design calculations
• To liaise with AC and QP(D) to ensure that all permits and applications as required by BCA are endorsed in tandem with the progress of the Works
• Lead in the review of Contractor’s submissions required of the Consultant and coordinate with his respective QP(S) and the Contractor’s design teams to ensure prompt resolution of all design-related issues arising from the reviews of the Temporary and Permanent Works.

Responsibilities:

• The Senior Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognised by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on projects similar in nature to vehicular tunnel, including at least five (5)years in the design of geotechnical works for deep excavation

Stand in rate to be discussed during interview.

RF Unit

• Disassemble RF unit and Calibrate the unit according to SOP
• Troubleshooting and repair of PCB assemblies
• Soldering work and board rework on HD, surface-mount PCB assemblies
• Provide necessary fault information and repair records for work carried out
• Knowledge of handling different test and measuring equipment, LCR meter and Network Analyzer
• Complete repair job in a timely manner
• Maintain SOP documents required for daily repair/rework operation
• Knowledge of Smith Chart

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 3 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be advantageous.
• Ability to rationalise designs and produce economic plant layouts.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Documentation Management:

· Create and maintain project files, documents, and records.

· Organize and categorize project-related materials for easy access.

· Ensure that project documentation is up-to-date and accurate.

Scheduling and Planning:

· Assist in creating project schedules and timelines.

· Coordinate meetings, appointments, and project-related events.

· Coordinate and liaise with clients and any other government authorities and agencies for applications, submissions, and work arrangements.

· Pre-condition and post-work surveys to document site conditions for project records and closing out of authorities’ applications.

· Joint inspection and measurement with the client for project claim submission.

· Quantity surveying for preparation of sub-contractor contracts.

· Monitor project progress and deadlines.

Efficiency Management and Documentation:

· Assisting the project manager in ensuring efficiency and datelines are met.

· Coordinating between team members to ensure files are up to date and shared commonly.

Communication:

· Act as a point of contact between project team members, stakeholders, and external partners.

· Distribute project-related information and updates to relevant parties.

· Assist in preparing and distributing project reports, presentations, and meeting minutes.

Budget and Financial Support:

· Assist in tracking project budgets and expenses.

· Help with financial documentation and reporting.

Quality Assurance:

· Assist in ensuring that project deliverables meet quality standards.

· Maintain records related to quality control, testing, and batch installation.

Team Support:

· Provide administrative support to project team members as needed.

· Facilitate team meetings and communication.

Reporting:

· Generate and distribute regular project status reports.

· Compile data and metrics for project performance analysis.

Requirements

• NITEC or Diploma in Business, Quantitative Survey, Project Management, Engineering or any relevant fields of study.
• No prior experience required.
• Good command of written and oral English.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.

5.25 days' work week, alternate Saturday (half day).

8.30am to 6pm.

Process Associate Engineer (Die Prep) is responsible to support the engineering activities as well as the daily production activities reliably and efficiently.

Candidates with related experience in semiconductor and/or electronics manufacturing industry are encouraged to apply for this position.

Responsibilities

• Ensure process integrity for machine related to production
• Process monitoring via SPC / real time monitoring system
• Work on process improvement projects
• Handle disposition and on hold lots
• Maintain good housekeeping in the production area
• Support in recipe setup and qualification for production
• Assist to troubleshoot process-related issue
• Collect engineering data
• Any other ad-hoc duties as assigned by reporting supervisor

Requirement

• Minimum diploma in electrical / mechatronics / mechanical/ microelectronics engineering or similar discipline
• Minimum 2 years’ experience working in semiconductor manufacturing environment
• Minimum 2 years of experience working in Die Preparation process such as Backgrind, Dicing and Laser-grooving.
• Knowledge in basic SPC and Microsoft Office
• Flexible to work under various shift pattern. The selected candidate will start with office hours first, and eventually work on 12-hour rotating shift (day and night)

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Our client is a global provider of intelligent automation and integrated security management solutions.

• Oversee and manage facilities, security projects, and maintenance from concept to completion.
• Work with cross-functional teams to gather requirements and design tailored solutions.
• Establish a maintenance regime for facilities to ensure minimal downtime.
• Ensure projects are completed on time, within budget, and meet the highest quality standards.

Requirements:

• Diploma in Electrical & Electronics Engineering/Instrumentation Control or equivalent.
• Minimum 2 years of hands-on project execution experience in ELV and CCTV.
• Good understanding of Electrical Control.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively. The term ‘cost’ is to embrace all costs associated with the design and the subsequent construction of the design. To be cost-effective, the whole outturn cost of the design solution must be considered, including design time costs, material costs, erection costs and any impact that the design solution might have on other disciplines.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• Monitor installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have experience in leading design delivery, including multidisciplinary design.
• The candidate shall have Excellent knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall maintain files and records throughout the duration of contracts.
• The candidate shall assist in supervising and developing staff.
• The candidate shall assist in ensuring a safe working environment for all staff.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The candidate shall have at least 8 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience in monitoring members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• A flexible mind, with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• Ensure that standard practices are utilised wherever possible.
• Provide estimates and feedback for proposals department.
• The candidate shall undertake outline and detailed designs and specifications for electrical, instrumentation and control works.
• The candidate shall provide day-to-day technical input as part of a team of engineers.
• The candidate shall ensure that the design output is completed in accordance with the agreed scope of work, timescales, and budgets.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• The candidate shall monitor the installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have good knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices.
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall work to the procedures and processes to ensure the continuing development of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The Candidate shall have about 5 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Documentation Management:

· Create and maintain project files, documents, and records.

· Organize and categorize project-related materials for easy access.

· Ensure that project documentation is up-to-date and accurate.

Scheduling and Planning:

· Assist in creating project schedules and timelines.

· Coordinate meetings, appointments, and project-related events.

· Coordinate and liaise with clients and any other government authorities and agencies for applications, submissions, and work arrangements.

· Pre-condition and post-work surveys to document site conditions for project records and closing out of authorities’ applications.

· Joint inspection and measurement with the client for project claim submission.

· Quantity surveying for preparation of sub-contractor contracts.

· Monitor project progress and deadlines.

Efficiency Management and Documentation:

· Assisting the project manager in ensuring efficiency and datelines are met.

· Coordinating between team members to ensure files are up to date and shared commonly.

Communication:

· Act as a point of contact between project team members, stakeholders, and external partners.

· Distribute project-related information and updates to relevant parties.

· Assist in preparing and distributing project reports, presentations, and meeting minutes.

Budget and Financial Support:

· Assist in tracking project budgets and expenses.

· Help with financial documentation and reporting.

Quality Assurance:

· Assist in ensuring that project deliverables meet quality standards.

· Maintain records related to quality control, testing, and batch installation.

Team Support:

· Provide administrative support to project team members as needed.

· Facilitate team meetings and communication.

Reporting:

· Generate and distribute regular project status reports.

· Compile data and metrics for project performance analysis.

Requirements

• NITEC or Diploma in Business, Quantitative Survey, Project Management, Engineering or any relevant fields of study.
• No prior experience required.
• Good command of written and oral English.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.

5.25 days' work week, alternate Saturday (half day).

8.30am to 6pm.

A start-up IT and application company is seeking an experienced Full Stack Engineer, a versatile software developer skilled in both front-end and back-end application development.

Here's a brief overview of what the job entails:

1. Remote work, responsible for the entire process of project architecture design and functional module development, with the ability to break down tasks based on project requirements.

2. Participate in system development planning, code writing, code review, requirement analysis, defect tracking, and quality control activities.

3. Participate in backend API development; familiarity with Java microservice architecture is required.

4. Continuously optimize code quality to enhance system performance and stability.

5. Proficient in mobile front-end technologies and familiar with front-end framework design.

6. Supporting in system maintenance (training provided by colleagues based in China)

7. Trademark and Intellectual Property (IP) application

8. Proactively communicate, identify, and resolve system issues.

9. Have a certain understanding of industry knowledge and focus on user experience.

Job Requirements:

1. Bachelor's degree or above in Computer Science, Software Engineering, Electronics and Information, or related fields.

2. Over 3 years of experience in system development, proficient in using Java, Spring, MySQL, and Vue (or Bootstrap).

3. Proficient in Java and object-oriented design principles, with a solid understanding of JVM fundamentals.

4. Skilled in commonly used front-end technologies, including HTML/CSS/JavaScript/Node.js, and experience with mainstream development frameworks like React or Vue.js.

5. Familiar with commonly used databases such as MySQL, with proficiency in SQL for database queries and basic database operations.

6. Ability to work independently and complete relevant development tasks.

7. Speak in Mandarin, familiarity with WeChat for information exchange, and English for translation work are essential. You will be expected to communicate and work closely with colleagues based in China.