As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry innovation research project where you will be part of the research team to perform modelling and real-time simulation of electric vessel’s onboard microgrid and propulsion system.

Key Responsibilities

• Participate in and manage the research project with Principal Investigator (PI), Co-PI and the research team members to develop onboard microgrid simulation models with energy management systems as well as to plan and test the relevant hardware systems.
• Work with research team to deliver the work scope and undertake these responsibilities in the project.
  Work Responsibilities:
  1. Develop detailed electrical models of the microgrid (power system) of various e-vessels based on the concept design in a simulation environment such as Matlab/Simulink.
  2. Design and develop an intelligent energy management system for the e-vessel microgrid for coordinated control of multiple energy sources considering cost, carbon, and operation constraints.
  3. Operate the simulated electrical model with EMS controller to perform simulations for various cases to demonstrate performance and recommend improvements at unit, sub-system and whole system level.
  4. Implement and carry out simulation studies for onboard microgrid and connection to shore charging infrastructure.
• Recommend efficient and reliable power system architecture(s) with other merits of high-density and light-weight.
• Test the relevant power electronics and drives system hardware and troubleshoot the challenging problems.
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaison with vendors/suppliers.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment and assist in laboratory management.
• Mentor students involved in the research project
• For those hired at senior levels, management responsibilities may be included

Job Requirements

• Have a Master’s or PhD’s degree in Electrical Engineering or equivalent from a recognized University. Major in Power Engineering will be advantageous.
• Minimum 3 years of relevant experience in modelling and energy management algorithm development using MATLAB/Simulink for microgrid applications.
• Knowledge of power electronics, drives, and control is highly preferred. Hardware testing experience will be advantageous.
• Have experience and commitment to participate in project meetings.
• Self-motivated team player and good project management skills.
• Excellent writing, communication, presentation, and interpersonal skills.

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university.
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work

Role:

Production Engineer (Mechanical / Manufacturing)

• Singapore Based (Senoko, Sembawang area, company transport provided)
• 5 Days work per week (8am to 5.30pm)
• Salary: Up to $3100 + Allowance + AWS + VB
• Degree in Mechanical/Manufacturing Engineering or equivalent + 1 year with relevant experience is an added advantage.
• Knowledge on TS/IATF 16949, OHSAS18001, ISO14001, SPC, FMEA and TPM will be added advantage.
• Require putting on jumpsuit and protective mask as Personal Protective Equipment whenever it is necessary. + Willing to work overtime when needed
• Career Progression Opportunities

Responsibilities

• Responsible for production operation activities to ensure smooth and efficient manufacturing process.
• Liaise with cross functional department on effective corrective/preventive actions, including carry out improvement activities such as process optimization, benchmarking, etc through various statistical tools and software.
• Handle audit in accordance with TS/IATF & ISO and OHSAS requirements

#SCR-vicky-wee

✅ Wee Yuan Huan
✅ Reg No: R21100383
✅ The Supreme HR Advisory Pte Ltd
✅ EA No: 14C7279

• Mentorship, guidance, and training will 100% be provided
• Great for fresh grads who want to start out in the engineering field

• Responsibilities:
• Design, prepare shop drawing, methods statements, quality installation, inspection, testing and commissioning, documentation works for BMS system.
• Site coordination, project schedule planning, coordinate site works
• Design and deploy BMS controlling and building automation system.
• Project Management and attend project meeting.
• Provide training to customers.
• Provide testing and commissioning services

Requirements:

• Min Diploma / Degree in Engineering (Mechanical / Electrical Engineering / Construction / Building related)
• Able to define BMS project work scope, requirements and specifications, and identify, allocate resources for executing the project from start to completion.

HOW TO APPLY:

Simply submit your application with your updated Resume in MS Word Format to Ashwin Vivek Vinod (EA Personnel Reg. No.: R22111690) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, Ashwin Vivek Vinod, at 6590 9957 or 9178 0355 for a confidential discussion.

Please click APPLY NOW button to submit your application

Please indicate the below information in your resume:

• Current & Expected salary
• Reason(s) for leaving
• Availability to commence work

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

About HOYA Surgical Optics (HSO)

HOYA Surgical Optics (HSO) is the globally leading Preloaded Intraocular Lens (IOL) focused company that provides technologies and solutions that exceed expectations, enabling ophthalmic surgeons to focus on restoring sight. We are dedicated to improving the vision and quality of life for millions of people suffering from cataract, and helping them celebrate life visually.

HSO empowers cataract surgeons all over the world with innovative ophthalmic devices and services, with an attention to detail that helps them achieve better surgical outcomes and better practice results. Our commitment to delivering these results is grounded upon a quality management system that is continuously improving to meet changing global regulatory requirements and our entrepreneurial drive to be the brand of first choice.

At HSO, People is the key factor to our success. We aim to create a conducive work environment for our employees around the globe, and to promote an inclusive culture based on our core values – Excellence, Passion, Innovative, Collaboration, and Accountability.

HSO way of working

In fulfilling our roles, we are

• Accountable for our own capabilities and development,
• Focused on delivering results without excuses, and
• Alive to the sensitivities, risk, and impact we have on others and work in a way that helps others do their work effectively.
• We are looking for people who
• See beyond themselves and are impact-focused,
• Consider the needs, challenges, and objectives of every person with whom they interact, and
• Exhibit positive reinforcement to help others succeed.

About the role

Works closely with and have impact on: Global Research & Development (R&D), Post Market Surveillance, and Global Regulatory Affairs (RA) Teams

Reports to: Senior Manager QA R&D

Function: Global QA & Compliance Organization

Work Location/Site: Singapore / Global Headquarters

Role Overview

This position is responsible to ensure that products meet quality goals and regulatory requirements, including but not limited to FDA Regulations, ISO 13485, EU MDR requirements, and Risk Management per ISO 14971 and maintain compliance of the Quality Management System (QMS).

Duties and Responsibilities

• Partner with R&D teams in the USA, Japan, and Singapore to ensure that design control is completed in accordance with procedures, WI, regulatory requirements, and assure that required outputs have been completed
• Execute risk management for devices, processes, and provide the assessment results from product development through to the launch
• Maintain and update risk management files with Global R&D/Manufacturing Engineering (ME) teams to support product development (Risk Management Plans, Risk Control Log, Benefit Risk Assessment Risk Management Report, xFMEA, etc.), and act as the Risk Management expert
• Assist in the review and approval of design development plans, verification and validation protocols, reports, master V&V plans and reports, and design transfer
• Review and approve design verification test protocols, reports and data from a logical point of view (Compliance, rationale, objectiveness and statistics)
• Partner within Quality and R&D to ensure design control documentation (Risk Management, Traceability/Linkages) & design change control requirements are met
• Review and approve biocompatibility protocols and reports
• Ensure compliance of IQ, OQ, tests method validation, Standard Operating procedures and work instructions regarding product development
• Maintain compliance to QMS procedures of the R&D Singapore site, and support the Singapore R&D Site - QA
• Support External audits by competent authorities and notified bodies
• Support internal audits at the local site, and other sites as required
• Review and approve other quality documents (e.g., IQ, OQ, PQ, WI, etc) within areas of responsibility
• Propose and execute quality/process improvements. Write/review policies/ processes/ procedures and related documents
• Manage and monitor the progress of the calibration and maintenance of testing equipment. Ensure calibration or maintenance records satisfy regulatory and QMS requirements (act as Equipment Control Administrator in Singapore)
• Participate in development projects and change control request meetings to support the resolution of engineering issues
• Collaborate with the post-market surveillance team and complaints investigation teams to maintain risk management process throughout a product’s lifecycle
• Provide support for other quality activities and improvement initiatives, quality data collection and trending, CAPAs, change controls, training, etc.
• Support initiatives as identified by management to support QMS and other regulatory requirements in Singapore

Requirements

Experience

• At least 4+ years of Industry experience working as QE Engineer in Medical Device/ Pharmaceutical product or optical engineering business field
• Experience in test method validation
• Experience in Design control, Design Transfer, Design and Development Process
• Demonstrated knowledge of Risk Management (ISO14971), Design control, Design and Development Process and Quality System (any one of ISO13485).
• Understanding and Knowledge of biocompatibility studies
• Experience in coordination and planning of complex activities and ability to identify and resolve complex problems through effective use of technical and interpersonal skills
• Product development experience (e.g. approaches for definition of requirements and specification setting for verification and validation). Practical experience in design control and risk management
• Effective use of oral and written communication skills to clearly communicate the quality position, and the actions necessary to resolve issues
• Interpersonal, team, leadership, and negotiation skills to handle conflicting priorities
• Strong oral and written communication skills, excellent interpersonal and cross-cultural skills required
• Capable of clearly presenting and justifying quality requirements to management
• Accreditation by a professional body is highly desirable. Examples include American Society for Quality (ASQ) Certified Quality Auditor (CQA) or Certified Quality Engineer (CQE)

Skills/Accreditations

• Smooth communication ability
• Business software skills (e.g. Word, Excel and Power point)
• Experience with statistical software such as Minitab
• Voluntary working attitude with a creative idea
• Passionate working attitude to pursue a goal with patience.
• Flexibility for changes

Academic Qualifications

• A bachelor’s degree or higher in Chemical, Bioengineering, Mechanical, Optical Engineering or related fields.

Travel requirements

• 2-3 international travel annually mainly Thailand.

By submitting your application, you consent to HOYA Group collecting, disclosing, and retaining your personal data for employment assessment and verification purposes.

If you are shortlisted, we will contact you within three weeks of your application. Thank you for your application and understanding.

We are looking for a Staff Analog Layout Engineer to contribute to the development of High-Speed Connectivity, Broadband Analog and Computing/Storage-Memory Data-Transport products (including functional blocks such as high-speed digital, multi-GHz ADC/DAC, PLL/DLL serial and parallel I/O, and clock generation/distribution for custom ICs). The candidate must have a proven record of laying out high-performance analog circuits in state-of-the-art CMOS process technologies, successfully performed top-level integrations, and placed products into volume production multiple times.

Requirements

• Bachelor’s degree in Computer Science, Electrical Engineering or related fields and at least 5+ years of related professional experience.
• Master’s degree in Computer Science, Electrical Engineering or related fields with 3+ professional experience.
• Deep understanding of layout methodology from initial chip planning to tape-out.
• Deep understanding parasitic optimizing in layout
• Experiences in advanced process technology and Fin-FET is preferable.
• Have a high level of proficiency in interpretation of CALIBRE DRC, ERC, LVS, etc. reports.
• Have a high-level proficiency/knowledge of Synopsys or CADENCE layout entry tools.
• Programming skills in any of the following are a plus: Skill or Ample or Perl, etc.
• Strong technical and analytical background, problem solving skills, etc.
• Fluent in English

• Singapore Based (Bukit Merah)
• 5 Days 8.30am to 5.30pm
• Salary - $2500 to $3500 (Depends on experience)
• Nitec or Diploma in Electrical Engineering or Equivalent; At least 1 year experience in sales/customer service.
• Career Progression Opportunities

Requirements

• Nitec or Diploma in Electrical Engineering or Equivalent
• At least on year experience in sales/customer service
• Electrical Knowledge

Job scope

• Your job and responsibilities include support sales personnel for pre-sales activities, proposing solution that suits customer needs & resolve related solution for site preparation, installation, start-up, commissioning, repair and maintenance of Electrical Power System, Structural cabling, Fire suppression system, UPS, Security Access and CCTV Monitoring System etc.
• To supervise and oversee the work progress of project sites. This includes attending to site meeting, coordinating with appointed sub-contractors of various services to see to a smooth completion of projects.
• You will be assisting the Electrical Service Department in providing technical support to our staff, customers, and dealers.
• Prepare and maintain all project management documentation in accordance with company’s best practices.
• Planning and monitoring the project to ensure successful completion within planned timeline as well as status of progress-in-work and report all matters related to project and services.
• You are required to perform a complete in-house testing of Power equipment’s.
• Answer and attend to service calls, fault-finding, repair and troubleshooting of Electrical System and Power equipment malfunction.
• Establish and maintain excellent relationships with the customer project team, supplier, sub-contractors, and clients.
• Coordinate and liaise with PEs and/or site supervisors on detail drawings, layout planning and understanding of site requirements.
• Prepare, submit, and follow up with applications to the relevant authorities or building management where required.
• Preparation of electrical products data & engineering drawing in AutoCAD (2D, 3D).
• You may be assigned with other job duties and functions as may be instructed from time to time by your superior or the management.

Kylen Seah Reg No: R24124248

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. As an SGInnovate partner company, we can offer a monthly S$3000 SGD in stipend under the SGI Summation program for undergraduates, more for masters, PhD students. The following tracks are available, you would probably be doing a couple of them up to your preference, with examples of what has been done by previous interns:

Your role will include (*you don’t have to be proficient for all of them*):

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. Check out the link above for more information, and send your CV to [email protected]

Job Description & Requirements

• Experience in QA and support

• Experience with full-stack web-technologies like React JS, Node JS etc.

• Knowledge of the Software Development Process

• Working with databases and data manipulation

• Knowledge of Agile methodologies and testing techniques

• Adaptable technical knowledge and ability to perform multiple tasks at the same time

• Good written and verbal communication skills

• Passion for quality, performance, reliability and teamwork

Project engineer/Senior Engineer

Develop, maintain and manage working relationships with clients and all related parties.
Manage and implement overall project.
Coordinate with Project Manager on project matters
Supervise and provide advice to junior Project Engineer(s)
Check working drawing, identify discrepancies for resolution
Keeping track on variation and claims of contract
Perform project cost review on a regular basis and on identified areas.
Plan and manage project schedule to ensure timely delivery.
Perform incoming inspection on project materials delivered on site by suppliers or vendors.
Site coordination with subcontractors, supervisors and clients.
Ad-hoc duties as assigned by superior(s).

Job Requirements

Degree in Civil & Structural Engineering (Certificates must be recognized by PE Board).
Has relevant experience in infrastructure projects, e.g. roads and rail projects
Possess skills, knowledge and ability to supervise and manage project effectively
Independent, resulted-oriented and self-driven team player with good communication skills
Class 3 driving license will be added adv

need 6 more.. LTA project..Grad. PEB recognised

Job Descriptions

• Assist Project Manager in all on-site technical/ engineering matters and deal with Main Con EngineerPrepare submission of shop drawing / Materials / MOS/ Monthly Progress Claims and PM Reports
• Lead in Site Coordination and execution relating to the construction project, Deal with Maincon Supervisor ,Workers and subcon.
• Supervise and monitor projects are carried out in accordance with the company’s operating procedures, quality standards & contractual specifications.
• Ensuring supervisors meet clients’ regulatory work requirements.
• Complete technical and safety submissions prior to commencement of Bored Piling Projects
• Manage Site operation issues
• Carry out resource planning for bored Piling projects
• Liaise with Consultants clients and main contractor
• Prepare Flow Chart and Methods of Construction

Requiments

• Degree in Civil Engineering or Geotechnical Engineering (accreditated by Singapore PEB)
• At least 2-5 year experience in Piling or Geotechnical field is advantageuos
• Familiar with AUTOCAD
• Computer proficient in MS Office
• Good interpersonal and communication skills
• A good team player with ability to meet tight deadlines
• Good organizational planning skills
• Effective communication and coordination skills and teamwork

Job Responsibilities:

• Leads the technical team to support construction team for all design matters
• Reviews all technical documentation and drawings of the Project works
• Works closely with the appointed Consultants and construction team on designs and project deliverables to enhance site efficiency and constructability
• Leads on the design approval from the Authority/Agency including URA,BCA,LTA,PUB etc for the Project works
• Manages design approval process in a timely manner to resolve all technical issues
• Ensures strict compliance of the design in accordance with the contractual requirements
• Ensures the distribution of all the approved and latest drawings and other relevant documents to the relevant parties
• Leads the technical team to work closely with in-house BIM team and resolves all clarifications on technical requirements pertaining to the Project works
• Identifies and highlights to Management and project team of any potential risks or issues that will impact Project performance
• Prepares and presents design progress status and slides to Management, project team and Client as and when required.
• Strong coordination and collaboration with other disciplines (i.e Architectural, MEP, BIM etc.) on design to ensure delivery of high quality outcome
• Supports tender team and prepares technical tender documents as per specifications for bidding of civil and structural engineering projects as and when assigned
• Attends Progress Meeting, Technical Meetings, Coordination Meetings, Site Meetings, etc.

Job Requirements:

• Candidate must possesses Bachelor's Degree in Civil Engineering recognized by the Profressional Engineering Board
• At least 8-12 years of design experience or design management experiece.

Job Description & Requirements

Responsibilities

· Responsible for the implementation, support, administration, upgradation and management of windows Operating systems, MS Office products, etc.

· Responds to incidents utilizing a variety of communication vehicles including: email, bridge calls, conference calls, instant messaging, and one-on-one communications.

· End-To-End responsibility for time critical tasks, by engaging the appropriate partner to perform the activities

· Ensure that work is carried out within agreed service levels and in accordance with department guidelines. Create, maintain, and distribute reports of progress to senior leadership

Technical / Professional Skills

· Knowledge of Windows/Storage/Backup/User Access/Permissions/Networks etc, MS Office products, EzOffice, Using helpdesk portal and administration. Supporting Thinclients / Virtual PCs (VDI) (Windows), Desktop Operating Systems. Knowledge on VPN services, managing EUX inventory.

· Account lockouts, password resets, O365 issues support.

· Build and install PCs, telephone systems, wireless networks and peripheral devices (such as printers, scanners, mobile/smart phones) related to desktop infrastructure, in accordance with defined process and standards.

Non-Technical / Soft Skills

· Must have strong communication skills (Verbal and Written) and the ability to articulate task management, priorities, and issues, participate in customer visits, conference calls, and assisting with defining the scope of services tasks

· Must have worked for global customers and ready to work in 24X7 environments. rotating shifts & rotating weekly Offs. Able to use end user support tools like RDP, and/or other support tools.

GOOD TO HAVE

· Has experience supporting mobile like Ipad, Mobile, Tablets

· Maintain installed PCs, networks, telephone systems and peripherals with routine maintenance

Skills (Key Words)

Knowledge of Windows/Storage/Backup/User Access/Permissions/Networks etc, MS Office products, EzOffice, Using helpdesk portal and administration. Supporting Thinclients / Virtual PCs (VDI) (Windows), Desktop Operating Systems. Knowledge on VPN services, managing EUX inventory.

Job Description & Requirements

Responsibilities

· Responsible for the implementation, support, administration, upgradation and management of windows Operating systems, MS Office products, etc.

· Responds to incidents utilizing a variety of communication vehicles including: email, bridge calls, conference calls, instant messaging, and one-on-one communications.

· End-To-End responsibility for time critical tasks, by engaging the appropriate partner to perform the activities

· Ensure that work is carried out within agreed service levels and in accordance with department guidelines. Create, maintain, and distribute reports of progress to senior leadership

Technical / Professional Skills

· Knowledge of Windows/Storage/Backup/User Access/Permissions/Networks etc, MS Office products, EzOffice, Using helpdesk portal and administration. Supporting Thinclients / Virtual PCs (VDI) (Windows), Desktop Operating Systems. Knowledge on VPN services, managing EUX inventory.

· Account lockouts, password resets, O365 issues support.

· Build and install PCs, telephone systems, wireless networks and peripheral devices (such as printers, scanners, mobile/smart phones) related to desktop infrastructure, in accordance with defined process and standards.

Non-Technical / Soft Skills

· Must have strong communication skills (Verbal and Written) and the ability to articulate task management, priorities, and issues, participate in customer visits, conference calls, and assisting with defining the scope of services tasks

· Must have worked for global customers and ready to work in 24X7 environments. rotating shifts & rotating weekly Offs. Able to use end user support tools like RDP, and/or other support tools.

GOOD TO HAVE

· Has experience supporting mobile like Ipad, Mobile, Tablets

· Maintain installed PCs, networks, telephone systems and peripherals with routine maintenance

Skills (Key Words)

Knowledge of Windows/Storage/Backup/User Access/Permissions/Networks etc, MS Office products, EzOffice, Using helpdesk portal and administration. Supporting Thinclients / Virtual PCs (VDI) (Windows), Desktop Operating Systems. Knowledge on VPN services, managing EUX inventory.

Job Description & Requirements

Responsibilities

· Responsible for the implementation, support, administration, upgradation and management of windows Operating systems, MS Office products, etc.

· Responds to incidents utilizing a variety of communication vehicles including: email, bridge calls, conference calls, instant messaging, and one-on-one communications.

· End-To-End responsibility for time critical tasks, by engaging the appropriate partner to perform the activities

· Ensure that work is carried out within agreed service levels and in accordance with department guidelines. Create, maintain, and distribute reports of progress to senior leadership

Technical / Professional Skills

· Knowledge of Windows/Storage/Backup/User Access/Permissions/Networks etc, MS Office products, EzOffice, Using helpdesk portal and administration. Supporting Thinclients / Virtual PCs (VDI) (Windows), Desktop Operating Systems. Knowledge on VPN services, managing EUX inventory.

· Account lockouts, password resets, O365 issues support.

· Build and install PCs, telephone systems, wireless networks and peripheral devices (such as printers, scanners, mobile/smart phones) related to desktop infrastructure, in accordance with defined process and standards.

Non-Technical / Soft Skills

· Must have strong communication skills (Verbal and Written) and the ability to articulate task management, priorities, and issues, participate in customer visits, conference calls, and assisting with defining the scope of services tasks

· Must have worked for global customers and ready to work in 24X7 environments. rotating shifts & rotating weekly Offs. Able to use end user support tools like RDP, and/or other support tools.

GOOD TO HAVE

· Has experience supporting mobile like Ipad, Mobile, Tablets

· Maintain installed PCs, networks, telephone systems and peripherals with routine maintenance

Skills (Key Words)

Knowledge of Windows/Storage/Backup/User Access/Permissions/Networks etc, MS Office products, EzOffice, Using helpdesk portal and administration. Supporting Thinclients / Virtual PCs (VDI) (Windows), Desktop Operating Systems. Knowledge on VPN services, managing EUX inventory.

Job Responsibilities:

• Leads the technical team to support construction team for all design matters
• Reviews all technical documentation and drawings of the Project works
• Works closely with the appointed Consultants and construction team on designs and project deliverables
• to enhance site efficiency and constructability
• Leads on the design approval from the Authority/Agency including URA,BCA,LTA,PUB etc for the Project
• works
• Manages design approval process in a timely manner to resolve all technical issues
• Ensures strict compliance of the design in accordance with the contractual requirements
• Ensures the distribution of all the approved and latest drawings and other relevant documents to the
• relevant parties
• Leads the technical team to work closely with in-house BIM team and resolves all clarifications on
• technical requirements pertaining to the Project works
• Identifies and highlights to Management and project team of any potential risks or issues that will impact
• Project performance
• Prepares and presents design progress status and slides to Management, project team and Client as and
• when required.
• Strong coordination and collaboration with other disciplines (i.e Architectural, MEP, BIM etc.) on design to
• ensure delivery of high quality outcome
• Supports tender team and prepares technical tender documents as per specifications for bidding of civil
• and structural engineering projects as and when assigned
• Attends Progress Meeting, Technical Meetings, Coordination Meetings, Site Meetings, etc.

Job Requirements:

• Candidate must possesses Bachelor's Degree in Civil Engineering recognized by the Profressional
• Engineering Board
• At least 8-12 years of design experience or design management experiece.

echnical Architect

Overview
We are seeking a seasoned AWS Technical Architect to design, implement, and optimize our cloud infrastructure on AWS. The ideal candidate will have extensive experience with AWS services, infrastructure automation using Terraform, and in-depth knowledge of networking, compute, storage, database, monitoring, and alerting solutions. This role is critical to ensuring our cloud infrastructure is secure, scalable, and efficient.

Preferred Skills
Experience with GCC and IM8 policies is essential. Additionally, proficiency with advanced AWS tools and frameworks like Kinesis, Chime, OpenSearch, and Generative AI (GenAI) using Retrieval-Augmented Generation (RAG) is highly valued.

Key Responsibilities:

1. Cloud Architecture and Design:

• Design and implement highly available, resilient, and scalable architectures on AWS, covering networking, compute, storage, and database solutions.
• Architect solutions leveraging AWS best practices for security, cost optimization, and performance.

2. Infrastructure as Code (IaC):

• Develop, maintain, and manage Terraform configurations for automated provisioning and management of AWS resources.
• Implement best practices in version control, modularization, and reuse to ensure IaC maintainability and scalability.

3. Networking and Security:

• Design secure VPC architectures, subnets, routing, VPNs, and peering connections for multi-region and hybrid environments.
• Manage security groups, network ACLs, and identity access management (IAM) to ensure a secure AWS environment.

4. Compute, Storage, and Database Solutions:

• Leverage AWS services like EC2, ECS Fargate, and Lambda for compute workloads, based on application needs.
• Design scalable storage solutions using S3, EBS, and EFS.
• Architect and optimize database solutions with RDS, DynamoDB, and Aurora.

5. Monitoring, Logging, and Alerting:

• Implement monitoring, logging, and alerting solutions using CloudWatch, CloudTrail, and the ELK Stack (Elasticsearch, Logstash, and Kibana) to ensure observability and troubleshooting capabilities.
• Set up proactive alerts and monitoring for performance and security issues to minimize downtime and optimize performance.

Job Description & Requirements

Responsibilities

· Responsible for the implementation, support, administration, upgradation and management of windows Operating systems, MS Office products, etc.

· Responds to incidents utilizing a variety of communication vehicles including: email, bridge calls, conference calls, instant messaging, and one-on-one communications.

· End-To-End responsibility for time critical tasks, by engaging the appropriate partner to perform the activities

· Ensure that work is carried out within agreed service levels and in accordance with department guidelines. Create, maintain, and distribute reports of progress to senior leadership

Technical / Professional Skills

· Knowledge of Windows/Storage/Backup/User Access/Permissions/Networks etc, MS Office products, EzOffice, Using helpdesk portal and administration. Supporting Thinclients / Virtual PCs (VDI) (Windows), Desktop Operating Systems. Knowledge on VPN services, managing EUX inventory.

· Account lockouts, password resets, O365 issues support.

· Build and install PCs, telephone systems, wireless networks and peripheral devices (such as printers, scanners, mobile/smart phones) related to desktop infrastructure, in accordance with defined process and standards.

Non-Technical / Soft Skills

· Must have strong communication skills (Verbal and Written) and the ability to articulate task management, priorities, and issues, participate in customer visits, conference calls, and assisting with defining the scope of services tasks

· Must have worked for global customers and ready to work in 24X7 environments. rotating shifts & rotating weekly Offs. Able to use end user support tools like RDP, and/or other support tools.

GOOD TO HAVE

· Has experience supporting mobile like Ipad, Mobile, Tablets

· Maintain installed PCs, networks, telephone systems and peripherals with routine maintenance

Skills (Key Words)

Knowledge of Windows/Storage/Backup/User Access/Permissions/Networks etc, MS Office products, EzOffice, Using helpdesk portal and administration. Supporting Thinclients / Virtual PCs (VDI) (Windows), Desktop Operating Systems. Knowledge on VPN services, managing EUX inventory.

Admin

• Working Hour : Monday-Friday [ 10am-7.30pm ]
• Location: Rochor
• Salary: up to $2500

Requirements:

• Preferably familiar with autocount accounting software

Job Scope:

• Assist other administrative works, or any ad-hoc task to assist senior
• Stock Count

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Responsibilities:

• Oversee and resolve network, systems, firewall, and storage-related issues for the company.
• Offer end-user support and training for both hardware and software applications.
• Install, configure, and provide ongoing technical support for workstations, software, communication services, network printing, scanners, biometric systems, CCTV, and other related equipment.
• Provide IT support and troubleshooting for end users on a daily basis.
• Perform system administration and maintenance tasks, including data protection, backups, and managing disaster recovery sites.
• Deploy, manage, and troubleshoot user workstations and computer equipment.
• Monitor antivirus activity, generate reports, and ensure updates are applied as needed.
• Develop user guides and maintain accurate IT records and documentation.
• Manage inventory for hardware and software assets.

Requirements:

• Diploma or Bachelor's Degree in Computer Science, Information Technology, or a related field.
• Minimum of 5 years of relevant work experience in the field.
• Strong knowledge of TCP/IP and Windows systems.
• Experience in the construction industry is a plus.
• Solid understanding and hands-on experience with Windows operating systems, Office 365, SharePoint, and Autodesk software.

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).
Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Nyon Hock Sen
EA Personnel Reg No: R24124070

• Working hours: 5 days(Mon - Fri), 8am - 6pm
• Location: Corporation Dr [Lakeside]
• Salary:$2,200 - $3,000

Sales Responsibilities:

• Processing of sales orders, delivery orders, and invoice.
• Provide feedback on the efficiency of the customer service process.
• Ensure customer satisfaction and provide professional sales support.
• Answer all product-related questions and addressing queries promptly.
• Communicate efficiently with customers through various channels.
• Support the development of new and existing products.
• Bookkeeping of customers’ transactions, complaints and all necessary records.
• Other duties as assigned by management.

Telemarketing Responsibilities:

• Procuring new clients through direct contact and word-of-mouth.
• Attending networking activities to research and connect with prospective clients if required
• Maintaining meaningful relationships with existing clients to ensure that they are retained.
• Suggesting upgrades or added services that may be of interest to clients.
• Crafting business proposals and contracts to draw in more revenue from clients.

Requirements:

• Proficient in MS Office application such as Word, Excel
• Min. O levels and above
• Relevant Experience

Interested applicants can email your CV to [email protected] or whatsapp to +65 89249206

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580

Benefits:

• Basic salary up to 4.8k depending on experience
• Annual performance bonus (min 1 month)
• Annual increment
• Education sponsorship & fully paid external training
• Mobile reimbusement ($50/month)
• Dental claims ($250/year)
• AL starting from 15 days
• Fully covered GP medical fees
• Free company transportation from Clementi MRT

Key Responsibilities:

• Administer core system like Active Directory Services, Data Centre and server storage
• Manage communication tools like video conferencing, audio systems and telephony
• Configure and maintain network devices such as firewalls, routers, VPN and etc
• Ensure systems are backed up automatically and create disaster recovery plans
• Monitor system resources (CPU, storage) and apply patches
• Liaise with external vendors to ensure Service Level Agreements (SLA) are met
• Write and update user guides and administration manuals
• Provide technical support to both Local and Overseas (via LAN/WAN)
• Provide L1/L2 support in IT projects
• Other IT related duties

Requirements:

• Min Diploma in IT or Computer Science, or equivalent
• Familiar with internet architecture designs (TCP/IP, DNS, DHCP, Proxy, Firewall)
• Preferably with experience of Veeam, VMware, and UNIX/Linux
• Familiar with devices like Alcatel PABX, FortiGate Devices, Cisco and Unifi Wireless AP Controller would be advantageous
• Bilingual in English and Chinese to liaise with Chinese speaking overseas counterparts

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

• Working location: Hillview
• Salary: $2,800 - $3,000 + Commission + Bonus

Responsibilities

• Understand the market and find new avenues to generate business to hit department targets
• Find new avenues of growth through long-term service contracts to augment ad-hoc business.
• Assist in preparing proposals and quotations for incoming enquiries
• Prepare information and assist the Manager with tender submissions
• Provide input and assist with new digital and traditional marketing campaigns
• Follow up on submitted proposals and work closely with the Manager to foster strong relationships with customers
• Create and track submitted proposals and report status to the Manager
• Develop an appropriate network of industry contacts and reach out with direct marketing tools
• Liaise with manufacturers of products to study problems, troubleshoot technical questions and relay information back to Manager
• Represent at trade exhibitions and events as required
• Accompany the Manager for client meetings as needed.

Requirements

• Proficiency in Microsoft Office
• Relevant work experience

Interested applicants can email your CV to [email protected] or whatsapp to +65 89249206

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580

Key responsibilities will include but are not limited to:

• Manage administrative and HR work for a small production company
• Manage internal Digital marketing,
• Coordinate and assist the production team in execution and management of videos and social media campaigns
• Prepare production schedules and media buying plans.
• Have a understanding of Social media analytics
• Able to work independently as well as in a team
• Work with production team on Creating PPT Proposal for social media projects and campaigns

Requirements:

• 1 year of experience in social media content generating and marketing.
• Knowledge of Canva
• Proficient in Microsoft Office (Word, Powerpoint, Excel, etc)
• Possess at least a certificate in Business adminstration or Digital Marketing or Mass Communication or Social Media-related fields
• Possess good time management and organisation skills
• Ability to work in a fast-paced environment
• Knowledge of social media platforms (Instagram, Facebook, YouTube, Twitter, Wechat & Tiktok) and micro sites.
• Knowledge of Social media analytics
• 5 Days Working Week
• Able to start immediately

• Coordinating and ensuring new engines upon receipt and installation.

1. Coordinate paperwork and processes upon new engines arrival
2. Engine Commissioning for all Industrial and Marine Engines
3. Work closely with the relevant stakeholders to ensure smooth process of installation
4. Troubleshoot if not able to start up during testing
5. Escalate if there are any deviation or issues

• Before Maintenance or Repair Event for Engines Secure that right information, tools and spare parts are available.

1. Carry out routine and preventive maintenance related work seeking data and using SDP. 3, diagnostics, MULTI, or other applicable system/tools according to service manual
2. Collect, understand and start up work order
3. Collect additional information
4. Secure access to right tools
5. Pick up spare parts

• During Maintenance or Repair Event for Engines Through well-known and described working methods and standards perform maintenance or repair on time in a correct and safe way.

1. Carry out work in a structured and methodical way according to checklists.
2. Prepare Industrial/Marine engines and or components
3. Complete visual inspections
4. Search for additional information in systems
5. Secure spare parts for additional jobs
6. Perform maintenance or repair on engines/component
7. Manage deviations
8. Return not used spare parts
9. Clean exchange parts
10. Return special tools
11. Restore engines to handed-in condition
12. Inform next level about additional faults or findings

• After Maintenance or Repair Event for Engines Secure minimized lead time of invoicing. Through clear description of performed work and/or communicated what needs to be done if the work is handed over to a colleague.

1. Clarify performed work in work order and put signature
2. End work order
3. Complete handover
4. Ensure all job cards, work orders, service sheets and component failure reports are filled and completed correctly.

Chan Chee Meng
EA 07C3069
R1110620

Job Description

• Industry/ Organization Type: Energy Equipment and Solution Provider
• Position Title: Technical Support Engineer (Electrical)
• Working Location: West (Nearest MRT: Clementi)
• Working Hours: 5 days (Mon to Fri: 8 am-5 pm or 9 am-6 pm)
• Salary Package: Up to SGD 4000 + AWS
• Duration: Permanent

Key Responsibilities

• Deliver technical support for after-sales service to both local and regional clients.
• Oversee the provision of immediate and efficient technical support through on-site visits, phone, email, and other virtual means for a variety of products.
• Offer expert technical guidance and propose solutions for resolving customer issues.
• Communicate with the internal team to elevate product concerns and ensure consistent follow-up with customers regarding the progress and resolution of these issues.
• Coordinate with the headquarters and affiliate companies concerning any product-related or technical concerns.
• Conduct hands-on training sessions for the internal team, such as technicians, to fully prepare them to conduct comprehensive product and system tests that verify functionality and compliance with specifications.
• Assist QA team in system testing, including conducting Factory Acceptance Testing, Interface Factory Acceptance Testing, and on-site testing tasks.

APPLY NOW!!!

• Min. ITE in Electrical Engineering
• Min. 1 year of quality engineering experience working in a manufacturing environment
• Comfortable to travel
• Experience in auditing to the requirement of ISO quality system standards will be an added advantage
• Training provided to inexperienced candidate

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66245 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694