Job Responsibilities:

• Operate, maintain, and repair central chiller plant equipment, including chillers, cooling towers, pumps, and related components.
• Carry out preventive maintenance of properties and attend to all work orders issued by tenants and management
• Monitor system performance, conduct regular inspections, and perform preventive maintenance to ensure optimal efficiency and reliability.
• Ensure compliance with safety rules and regulations
• Maintain and monitor building systems
• To assist the departments in all aspects pertaining to electrical, ACMV engineering work to plumbing, sanitary installations, fire sprinkler, alarm systems, lifts and escalators etc

Key Requirements:

• Minimum 5-7 years of related building maintenance experience
• Skilled in Building Works, M&E, Air-Con and/or Electrical
• Independent, proactive and responsible team player
• Flexibility to work shift hours
• Effective communication skills to work collaboratively within a team and communicate with tenants and management.

Job Description

• Good co-ordination skills and good technical knowledge of M&E systems/ equipment, including security systems
• To carry out regular site supervision and inspection of the works/materials including any off-site production as instructed by the consultant team so as to ensure that mechanical and electrical works, including security systems, are constructed to required quality, accuracy and workmanship
• To monitor work in progress in accordance to Approved Master Schedules with breakdown to Monthly, Weekly and Daily programmes
• To assist the RE on daily, weekly and monthly reports of site progress as per contractor’s approved program, activities, issues and resolutions
• To check and verify reports, variations and progress claims submitted by contractors, including as built quantity for the variations
• To undertake any other duties related to the project as and when instructed by the SO and RE.

Qualifications

• Minimum Diploma in Mechanical / Electrical Engineering from a recognized institution
• Registered with IES/ ACES as a Resident Technical
• Minimum 5 years of M&E work experience with strong knowledge of local construction practices air-conditioning, electrical, fire protection, security systems, BMS, plumbing, sanitary and gas services
• Working location will be at Sentosa

Responsibilities

• Develop and deliver detailed solutions through consulting project activities
• Perform qualitative and/or quantitative analyses to assist in the identification of client issues and the development of client-specific solutions
• Coordinate with Internal and external stakeholders to ensure effective deliver of client specific solution
• Design, structure and deliver reports and presentations that are appropriate to the characteristics or needs of the audience
• To cultivate successful customer relationships

Requirement

• Degree in Computer Science or related field
• 8 to 10 years of overall IT experience with minimum 8 years of hands-on experience in Microsoft Dynamics AX 2012/D365 etc.
• Technical troubleshooting skills in areas like SSRS, Workflows, New Business process, Integration, alerts & email, data management, role permissions etc., in Dynamics Ax 2012/D365 F&O
• Understanding of modules AP, AR, Inventory, Finance in Ax 2012/D365 F&O
• Understanding of standard business process or enhancements
• End-to- end ERP implementation experience in AX 2012 or D365 FO
• Experience of a full life-cycle implementation and support of D365/AX in a Consulting role
• Excellent Communication and Customer support skills
• Strong Troubleshooting and Problem Solving skills

Responsibilities

• Broad experience in designing, programming, and implementing large distributed systems with microservices.
• Deep understanding of Application, Infrastructure and security architecture and non-functional aspects like Performance, Scalability, Reliability, Availability etc.
• Translate functional requirements to design.
• Work with technical SMEs to understand their requirements and ensure these are met.
• Define best practices and standards for the microservice implementation.
• Identify and define implementation patterns.
• Lead activities to build accelerators and tools to increase the quality of deliverables.

Essential Requirements (Skills Requirements)

• Bachelor’s degree in Engineering/Compute Science /Information Technology.
• 6-8 years of technical experience within architecture development, integration of backend systems and development.
• Strong Hands–on experience in developing applications using Java/J2EE, with Spring boot framework knowledge and experience.
• Experience in Java 8+, Spring, Spring boot, testing framework Junit, Cucumber.
• Prefer experience working as Full Stack Senior Developer with 2 years minimum hands-on skills in AngularJS and ReacJS.
• Good to have experience in Openshift and Kafka.
• Strong hands-on with design patterns, clean code.
• Experience with middleware/messaging technologies such as MQ, JMS, Kafka and exposure to event-driven design patterns.
• Strong CI/CD understanding and able to deploy microservices in container architecture.
• Demonstrated knowledge of authentication protocol and application security.
• Experience with MSSQL, data modelling, query development and performance optimization.

Responsibilities:

• Conduct investigation into causes of bus accidents / incidents arising from bus defects
• Assist in planning & managing campaigns for retrofitting on buses for improved performance, safety and standardization
• Assist to implement maintenance policies for vehicle improvement to meet our operational requirements in accordance to manufacturers’ recommendations
• Conduct engineering audits, smoke checks and field visits
• Any ad-hoc jobs as per assigned

Requirements:

• Diploma in Engineering
• At least 5 years' relevant experience in automotive industry
• Hands-on experience on bus repair
• Proficient in software applications such as Microsoft Office and SAP

We regret to inform that only shortlisted candidate will be notified.

Submitting this application for this position, you acknowledge that you have read the Data Protection Policy for Job Applicants (the “Policy”) of SBS Transit Ltd and its subsidiaries, affiliates and related corporations (‘SBST”) and consent to:

a. The collection, use and disclosure of your personal data by SBST for the purposes of your application and potential employment with SBST and the purposes set out in the Policy: and

b. SBST’s retention of your personal data for two years for consideration of future job opportunities (where applicable) form the date of submission of application.

RESPONSIBILITIES & DUTIES:

• To review all Authority's and Contractor's drawings

• To provide all relevant endorsements required by the relevant authorities

• Supervise all civil, structural and geotechnical building works, both permanent and temporary

• To ensure that contractor had obtained all necessary permits and clearance to work

• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures

• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works

• To review, evaluate and assess all formwork structure, formwork support systems etc

• To review and supervise safety, environmental and health matters

• To supervise the installation of instrumentation

• To supervise sanitary and plumbing installations, pump drainage works etc

• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations

• To review Contractor's design and supervise all works

QUALIFICATIONS & REQUIREMENTS:

• Min. 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for presentation of monitoring data for analysis and interpretation.

• Diploma in Civil and Structural Engineering

• Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

About our client: Our client is in the Waste management industry.

About the role:

• Products / Systems Manage product life cycles including new products and accessory configuration updates.
• Create and maintain solution and product catalogue to support commercialization. Actively support new project proposals when new offers are needed for pre-sale and bidding requirements.
• Focus on Product and system Application Development for Southeast Asia and China, including technical understanding and application of engineering solutions, a variety of industrial equipment / components going into the solutions, system automation know-hows, and digitization trends. At the same time, finding local alternatives to address cost and delivery needs.
• Co-operate with Partners in each market for New Product Application development. Technically source from qualified partners. Manage confidentiality, IP and Business cases.
• Handle Product & Technical Complaints and provide On-site Services to support project teams if needed.
• Set up database with product catalogue to track in Projects – what new products used in what projects, lessons learned, recommendation for future projects, wish list for new products.
• Carry out market research in each country with insightful intelligence, analyse, and formulate into product market competition strategies to integrate into product development plan.

Design (Team with 3 designer)

• Standardize design fundamentals, identify gaps to improve.
• Lead and Work with design team in each office to proactively design into opportunities and ensure design accuracy with local needs.
• Establish proactive Relationship with Influential Project Consultants and design houses for Technical Spec-in. Track such leads as a KPI to drive for pipelines with business leaders.

Commercial / Cross functional Co-responsibilities

• Define choices of products / solutions for commercial team to choose from to meet market demand.
• Define product plan for each year by working with cross functional team.
• Collect customer demands with and through commercial team to solution specifications to enable new product development. Provide timely technical Supports to commercial team to remove product barriers.
• Implement strategic pricing practices while collaborating with Sales and management to strive for balanced decision.
• Carry out Regular On-site Examinations for Key Projects to validate new product functionality and existing product and system function issues (feedback from team) and provide improvements.
• Work with market communication team and R&D to design Product promotion scheme, provide training for sales, distributors and customers. Participate in and work with the marketing in various academic conferences, exhibitions and other marketing activities.
• Align with Global product strategy and information sharing representing the region. Make and update sales tools related to products. Be the regional owner to link global initiatives for product introduction and launching champion with support from market communication.

Sales Support

• To attend technical review with sales team
• To attend technical meetings with clients

Project Support – HDB (Before Main Contractor)

• To attend coordination meetings with architects, m&e and structural consultants
• To coordinate and determine the level of pipe sleeve crossing under major roads
• To coordinate the level of pipe sleeve with major services such as sewer, power cables, etc
• To determine the position and depth of launching pits that will aid the installation under major roads
• To study and highlight authority requirements during the meeting.
• To reply to HDB review form
• To reply to NEA BP, DC, WD Advise
• To produce preliminary drawings to aid the tender process for main contractor
• To prepare drawings for PWCS QP endorsement
• To prepare drawings for Acoustic Consultant’s specifications
• To prepare drawings for MV provisions to be designed by MV consultant

Project Support – HDB (With Main Contractor)

• To attend technical meetings with main contractors
• To coordinate pipe clashes with m&e and structural services

Design Support

• To generate fabrication drawings for non-standard equipment
• To monitor project design submission schedule
• To allocate work assignments to other designers
• To check designs, shop drawings done by other designers
• To hold trainings to designers

About you:

• Bachelor’s or master’s degree in automation, mechanical engineering or relevant fields.
• More than 8 years product and application experience in Construction/Engineering industry.
• Good business negotiation and presentation skills.
• Excellent communication skills with local and western customers and colleagues.
• Good leadership to lead technical team to enable faster business growth.
• Proper flexibility and agility.
• Goal and results oriented.
• Able to work independently with professional judgments, proactivity and team player spirit.
• Willing to take up challenging assignments with such track records.
• Revit & AutoCAD

Other information:

• Work location: Central
• Working days: Mon-Fri, 9am to 6pm

*Please note that only shortlisted candidates will be contacted.*

Employment Agency: Kingsforce Management Services Pte. Ltd.

Employment Agency Licence No: 94C3545

EA Personnel: Wong Pik Kiun (Kimberly)

EA Personnel Reg. No.: R1984508

The proposed personnel shall have minimum three (3) years of experience in the supervision of works similar in nature to the Works in the Civil Contract.

The proposed personnel shall have a diploma in the civil/structural discipline or National Certificate in Construction Supervision (NCCS) or equivalent and shall be accredited by JAC of IES/ACES as QSS and/or registered under Structural Steel Singapore Society as a Registered Steelwork Supervisor.

The QSS shall meet the required minimum hours of work per month (Base Monthly Work Hours) which shall be computed based on the normal working hours for the week (forty-seven (47) hours a week).

Job Description

• Industry/ Organization Type: Accounting Firm (Global)
• Position Title: Audit Manager (Technical & Training)
• Working Location: Central
• Working Hours: Monday – Friday (8:45 AM – 5:30 PM)
• Salary Package: Up to $8,000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Assist with reviewing client/audit team working papers on the appropriateness of asset/ liability carrying amounts measured using fair or recoverable values.
• Perform independent valuations for businesses, intellectual property, financial instruments, etc.
• Conduct market and industry research.
• Construct and analyze financial models.
• Develop financial models and establish best practices, workflows, and procedures in related areas.
• Perform financial modelling and forecasting using various methods and tools.
• Review valuation reports for inaccuracies.
• Identify gaps in valuation reports and suggest improvements.
• Understand and apply financial reporting standards; pose relevant challenges and questions on key inputs and assumptions used by management.
• Guide the team in amending reports to clearly articulate valuation conclusions.
• Engage in technical research and consultations, including writing technical publications, reviewing and developing technical working paper templates and training materials, and facilitating/conducting technical training sessions.
• Review and develop training programs, coordinate and conduct training, and monitor CPE hours for audit professionals.
• Participate in other ad-hoc projects as required.

APPLY NOW!!!

• Bachelor’s Degree in Accountancy or equivalent professional qualification.
• At least 5 years of audit experience, preferably from an international public accounting firm.
• A demonstrated deep passion for specialization in technical research and professional training.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67105 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

• To provide supervision services to ensure the Contractors complies with the contract requirements and/or authorities’ requirements;
• To provide professional engineering services for reviews which shall include variation works;
• To review all drawings and specifications, and highlight any discrepancies, non-workable and/or missing details to authority and the Qualified Person (Design) [QP(D)] in a timely manner;
• To provide all relevant endorsements required by authority, BCA, other statutory authorities and agencies;
• To supervise all works or as directed by authority;
• To provide personnel and ensure all site supervision services are carried out efficiently and professionally;
• Any other professional engineering service and other services as set out in the scope of Services in this Tender and or as may be reasonably inferred; and
• Monitor safety and health including taking photos of unsafe acts and conditions and bringing to the authority attention.

Requirement:

• The RTO-C&S shall have a minimum of five (2) years of relevant experience as a RTO, of which at least three (1) years shall be in supervision of works in bored piling and temporary work.
• Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress report.
• Good analytical ability with strong verbal and written communication skills. Competent in keeping and maintaining proper and updated site records on progress of work
• Pro-active in resolving and managing site issue with good team spirit.
• Must be willing to do shift work

• To perform all roles and responsibilities required of site supervisors under the Building Control Act.
• To supervise the timely execution of the works and maintain quality control and ensure that the works are carried out in accordance with the contract specifications, drawings, allocated timeframe, all other contract documents and site instructions.
• To check mock-ups done on site, where necessary.
• To ensure that the required construction tests in connection with the construction works are carried out where necessary.
• To prepare defect lists, monitor progress of rectification works and ensure all defects are satisfactorily rectified.
• Write daily reports of works done by contractor and record daily manpower status on site.
• Inspect and maintain records of equipment/machinery/licensed machinery operator/permits (both statutory and aviation requirements).
• To ensure that the structural elements or critical works of the construction works are being carried out in accordance with the approved plans and with any terms and conditions imposed by the Commissioner of Building Control where necessary.

Requirement:

• Diploma in Mechanical or Electrical Engineering from a recognized tertiary institution or relevant qualifications.
• Minimum two (2) years of relevant experience as a RTO, of which at least three (3) years shall be in supervision of works similar in nature to major construction works in buildings, services laying and lighting & control systems.
• Accreditation with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore are preferred.
• Certificate in Building Construction Supervisors Safety (BCSS) Course

ROLES & RESPONSIBILITIES

• To assist in fixing Vending Machines (non-electrical works), such as

1. Removing and fixing Vending Machine’s columns
2. Basic testing of Vending Machine
3. Regularly lift and/or move objects

• Cleaning of cylinders
• To assist logistics supervisor in delivering machine to location
• To upkeep 5S housekeeping at Technical Services
• Ability to do welding.
• Any other duties assigned by Superior

REQUIREMENTS

• No experience required, training will be provided
• 2 months contract until February 2025.

Work Location: Kaki Bukit View

• Central-North location
• 5 days work week
• Excellent career progression
• Attractive employee welfare benefit
• Regional projects spanning from Singapore to China, Bhutan, and Cambodia.

Responsibilities:

Reports directly to the Managing Director. You are to serve as Qualified Person and manage a team of engineers to ensure safe structural/ geotechnical design and excellent delivery of service to clients.

• Serve as Qualified Person (QP) and responsible for PE endorsement for projects assigned
• Responsible for the profitability and cost efficiency of your team
• Project coordination/management
• Lead projects and attend meetings
• Supervise and inspect construction works.
• Managing and supervising technical/site staff and administrative functions of the projects.
• Provide guidance and manage engineers in the team to ensure on-time and accurate delivery of service.
• Check critical design calculations and specifications of the project prior to approving all C&S related documents and drawings produced in the projects prior to submission to regulatory authorities.
• Able to be hands-on to carry out detailed analysis and design of civil, structural, and geotechnical works
• Able to be hands-on in preparing design calculation reports and structural drawings for authorities' submissions;
• Able to coordinate with various stakeholders such as clients, consultants, and contractors for projects

Requirements:

• Degree in Civil/Structural/Geotechnical Engineering or its equivalent
• Local design experience in C&S engineering work & conversant with Singapore Building Codes and Practices
• Familiarity with engineering software (e.g. Tedds, StaadPro, Prota, Etab) and submission procedures to regulatory authorities
• Strong report writing skills to prepare and furnish reports
• Registered with Singapore PE Board as Professional Engineer
• Willing to sign as signing QP

We regret that only shortlisted candidate will be notified.

Encasa Asia Employment Services LLP

EA Licence No: 13C6898

Technician (Assembly/AutoCAD/Technical Drawing)

Responsibilities:

• Perform and ensure that assembly builds and test are completed as scheduled and according to required specifications, drawings and work instruction.
• Report and assist Engineers in problem-solving and troubleshooting.
• Perform housekeeping and comply with manufacturing discipline and cleanroom protocol.
• Other ad-hoc duties

Requirements:

• Min NITEC/ Diploma in Mechanical, Mechatronics Engineering or its equivalent
• Able to comprehend schematic/Technical drawing
• Experience in Orbital Welding and/or gas tungsten arc welding (GTAW), is an advantage.
• Able to commit rotating shifts

Interested applicants please submit your resume to [email protected]

Job Purpose

Technical Officer (TO) works in a team to perform preventive and corrective maintenance of railway signaling and communications systems to improve its reliability. TO assists in the preparation of maintenance activities and is technically inclined and adept in handling electronics and computer-based systems and equipment for maintenance.

TO also supervises the works of contractors and external stakeholders to ensure adherence to operating requirements, quality standards and safety standards. O can communicate effectively within the team and able to multi-task and can prioritize assigned maintenance workload in supporting maintenance activities.

Duties & Responsibilities

1. Work in any of SMRT depots, tracks, and facilities, as assigned by supervisors.

2. Work in rotating or fixed shifts (i.a.w. MOM guidelines), as assigned by supervisors.

3. Perform Preventive and Corrective on railway infrastructure assets, as assigned by supervisors. (Training and qualifications will be provided by company).

4. Operate equipment, locomotives and/or specialized track maintenance vehicles within depot and mainline tracks, as assigned by supervisors. (Training and qualifications will be provided by company).

5. Ensure the railway infrastructure system defects are identified, classified, and mitigated/rectified promptly.

6. Ensure that railway infrastructure defects are recorded and reported accurately in accordance with the maintenance procedures or OEM technical manual.

7. Ensure all works are done in a safe manner in accordance with the organisational procedures or OEM technical manual.

8. Ensure that the railway infrastructure system defects and maintenance records are properly documented and updated in the Maintenance Tracking System.

9. Assist supervisor to conduct training as required.

10. Perform Possession Master (PM) / Person-In-Charge (PIC) / ground shunter duty, as assigned by supervisors. (Training and qualifications will be provided by company).

11. Operate company forklift and/or aerial work platform, as assigned by supervisors. (Training and qualifications will be provided by company).

12. Drive company vehicle for the purpose of work. (For holders of Singapore Driving Licence. Familiarisation and authorisation will be provided by company).

13. Observe and report any safety concerns at the workplace.

14. Undertake any other tasks or functions that are supplementary to the performance of the works, as assigned by supervisor. (Training and qualifications will be provided by company, as required). Examples include (but not limited to):

a. Responding to emergency operations

b. Assist in the execution of projects including testing & commissioning, attendance to contractors, etc

c. Supervise contractors' work

d. Preparation of reports

e. Provide logistics support

f. Housekeeping

Physical Requirement

1. Able to work on a Shift Roster system in accordance with the MOM guidelines and Collective Agreement.

2. Able to work in harsh environment with present of dust, oil, grease etc.

3. Able to work at height.

4. Able to climb staircase ladders, work undercarriage in limited space, squat and stand for long duration up to 4-6hours.

5. Able to lift, carry and install heavy tools/equipment up to 15kg.

Qualifications and Work Experience

1. Higher NITEC in Electrical Engineering, Electronics Engineering, or equivalent

2. Preferably 2 years’ experience in a maintenance environment

Responsibilities

⦁ Partner with Advanced Infra Services' Sales Specialist and Account team in building pipeline through consultative selling approach, driving net new business opportunities within the existing regional account base as well as supporting client acquisition activities.

⦁ Take lead and/or work as part of a team with other functional teams to review overall solution taking into consideration the deliverable aspects as well.

⦁ Supports the Sales Team by providing views and input which is relevant to pricing considerations and provides the necessary technical proposal.

⦁ Architect the technical solution in response to customer requirements.

⦁ Supports technical representation in Bid Management and Review process.

⦁ Keeping abreast of market trends and product & competitor landscapes

⦁ Conducts enablement / client briefing on relevant solution to both clients & internal teams.

Requirements

⦁ Relevant technical certifications (eg. CISSP, CISM, CompTia Sec+, CEH, etc) with at least 8 years experience within the industry,

⦁ Familiar with architecture within security domains. e.g. PAM, endpoint protection, data protection/governance, threat prevention, SASE, DLP, SIEM etc.

⦁ Strong understanding of security architectures, solutions, processes, frameworks, and components

⦁ Incident response including security monitoring, network and endpoint visibility, threat management, and forensics is a plus

⦁ Knowledge in information security technologies & cyber threat actors, cyber-crimes and fraudulent activity targeting the technology or various industries

⦁ Familiar with PDPA, GDPR regulatory requirements and compliance standards in the ASEAN region (i.e. SG, MY, etc)

⦁ Business acumen, able to communicate effectively with all level of stakeholders

⦁ Able to adapt to a dynamic and fast-pace environment

RESPONSIBILITIES & DUTIES:

• To review all Authority's and Contractor's drawings

• To provide all relevant endorsements required by the relevant authorities

• Supervise all civil, structural and geotechnical building works, both permanent and temporary

• To ensure that contractor had obtained all necessary permits and clearance to work

• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures

• To coordinate the contractor, AC, QP(D), relevant agencies, including interfacing contractors and consultants etc for the works

• To review, evaluate and assess all formwork structure, formwork support systems etc

• To review and supervise safety, environmental and health matters

• To supervise the installation of instrumentation

• To supervise sanitary and plumbing installations, pump drainage works etc

• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations

• To review Contractor's design and supervise all works

QUALIFICATIONS & REQUIREMENTS:

• Min. 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for presentation of monitoring data for analysis and interpretation.

• Diploma in Civil and Structural Engineering

• Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

Any interested candicate please forward your resume to [email protected].

Job Description

• Operate the power plant according to procedures and requirements including but not limited to starting, loading, unloading and shutting down the complete plant and systems
• Support the ASCE/SCE/PSCE to meet the contractual, technical and commercial set-up and operation of the Power Station
• Have sound knowledge of the safe operating parameters, controls, precaution and safety interlocks when starting and loading plant equipment so as to avoid damage and to be able to run the plant in the most efficient manner
• Plant process conditions troubleshooting, analyzing and testing when necessary
• Able to manage, monitoring and control the plant process operation from control room DCS
• Record plant operating data and report defects and abnormalities
• Carry out isolation/normalization of equipment as require by the Permit To Work System
• Understand and familiar with Plant Chemistry including handling of plant waste discharge
• Carry out plant change-over and conduct testing of equipment to meet statutory compliance and best industry practices
• Input to and liaison where necessary for long term Station planning
• Assist to implement modern O&M practices, tools and techniques for safe, reliable and efficient Power Station operation and to fully utilise all Power Plant’s contractual energy, fuel and utility supply agreements
• Assist to establish and implement mandatory O&M policies and procedures to meet all Station, company and legislative requirements
• Assist to fully develop and utilize the CMMS for efficient and effective Power Station operation practices
• Fully utilizing the CMMS to ensure all operation activities and experiences are recorded to comply with station, legislative and company policy requirements
• Assist to implement a Quality Management System as applied to the Power Station
• To assist fully with and help implement and manage all Health, Safety and Environmental practices
• Communicate with Regulatory and Authority on all operation matters on a timely manner
• To take part in training both on and off site, to be trained and to train others as required
• The post holder will be expected to comply with all company and legislative health requirements relevant to their duties and responsibilities
• To undertake additional duties and responsibilities as deemed necessary by the ASCE/SCE/PSCE
• Such other duties and responsibilities as may be reasonably requested by your immediate supervisor / the head of department from time to time

Job Requirements

• Possess at least a Diploma in a relevant engineering discipline
• Relevant competency certificate as issued by the Singapore regulatory authority, or education leading to this will be advantageous
• At least 6 years of working experience in Power Station Operations (ideally on a CCPP)
• Ideally involved in the technical and maintenance aspects of Gas Turbines, with some experience in the erection, commissioning and initial start-up phases of a modern Power Station
• Knowledgeable and experienced in Health, Safety and Environmental practices
• Willing to work in Jurong Island and on 12-hour rotating shifts
• Transport provided at Jurong East MRT station

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Technical Officer (Service & Maintenance)
• Working Location: West (Jurong Port) – Nearest MRT: Lakeside
• Working Hours: 5.25 days, Monday to Friday (8.30 am – 5.30 pm), Every Alternate Saturday, (8.30 am – 12.30 pm)
• Salary Package: Up to $4000 + OT + Performance Bonus + AWS
• Duration: Permanent

Key Responsibilities

• Monitor, operate, and maintain cement plant machinery, including crushers, kilns, mills, and packing units, ensuring smooth and efficient production processes.
• Perform routine maintenance and troubleshooting of mechanical, electrical, and control systems to minimize downtime and ensure consistent plant operations.
• Continuously monitor equipment performance, identify potential issues, and take proactive steps to ensure optimal equipment efficiency and product quality.
• Ensure strict adherence to safety protocols, plant operating procedures, and environmental regulations. Report any incidents or hazards immediately.
• Work with process engineers and plant supervisors to optimize production processes and improve yield and energy efficiency.
• Assist in managing the inventory of spare parts, tools, and equipment to ensure readiness for any maintenance or repair jobs.
• Record, analyze, and report operational data, including machinery performance, production rates, and quality control results, to assist with performance reviews and decision-making.
• Work closely with cross-functional teams, including mechanical, electrical, and process engineers, to resolve technical issues and support plant improvements.

APPLY NOW!!!

• Min. ITE
• Min. 3 years experience in related fields (service and maintenance)

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69905 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Responsibilities:

• Carry out site supervision duties in accordance with the Building Control Act
• Ensure works are done appropriately following the approved drawings
• Assist the Resident Engineer on all site and/or construction-related matters.

Requirements:

• Minimum Diploma in Electrical Engineering or equivalent
• At least 10 years of construction experience in supervising electrical works
• A person with good communication skill and with ability to work in a team

Essential Responsibilities:

• Responsible for technical oversight of the New Deal Proposals and on time delivery to the product line and deal factory
• Lead global team to meet New Deal Proposal Timelines / Requirements providing clarification of any issues, corrections, and changes
• Communicate and provide feedback to the New Deal Proposal Team on presentations, training, tools, Standard Operating Practices, process and correct with owners as needed, and drive consistency
• Be able to step in and support across product lines and regions in order to look after the broader GE Aerospace Sales objectives in the event of urgent needs
• Provide guidance to the broader commercial team on technical modeling considerations in developing individual Customized Service Agreements (CSAs), Time and Material Agreements and other services products deal strategy.
• Empower and inspire the broader Global New Deal Technical Modeling team, engaging and stepping in to provide leadership and technical support as needed
• Support customer negotiations and engagements to develop and model customized services products to meet unique Customer needs
• Collaborate with product line, marketing and services commercial teams to support market forecasts, new product introduction and product strategy studies
• Demonstrate principle of LEAN and Flight Deck(GE’s lean operating model) in day to day work with participation and leading Kaizen and other initiatives in pursuit of continuous improvement.
• Collaborate with Engineering Fleet model teams especially during the release of new models, to understand and validate the changes to the model before release for usage in commercial underwriting process and communicate the changes to the deal factory teams.

Minimum Qualifications / Requirements:

• Bachelor’s degree from an accredited university or college or equivalent
• Minimum of 5 years of work experience in the aerospace, defense, or power related industries

Desired Characteristics:

• Strong fleet modeling, Contract Margin Review, and new deal proposal modeling experience
• Ability to guide and influence others
• Demonstrated process orientation in approach to work
• A desire to utilize technical foundation to expand into a commercial space
• Minimum of 5 years of experience in an aerospace or mechanical engineering position
• Master’s in business administration, finance or other commercial background
• Experience in Engine Systems design, performance engineering, field service engineering, product support, engine overhaul or repair shop experience
• Prior experience or working with sales support in Engines / Services, knowledge of related products, services and markets and desire to grow in this area
• Ability to identify and lead process automation, machine learning and/or artificial intelligence related projects in the space of technical and financial modeling.
• Creativity – ability to solve problems
• Collaborate well with multiple stakeholders. Listen and build solutions together
• High degree of adaptability; ability to excel in a dynamic, fast-paced environment
• Project management experience
• Demonstrated financial acumen related to prices, costs and margins
• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes, critical thinker
• Strong oral and written communication, persuasive and presentation skills, including executive-level communication.
• Strong external focus, keeping abreast of global, geopolitical, and emerging risks

Job Responsibilities

• Plan technical deliverables (including any system enhancements and upgrades) to meet project’s requirements within allocated budget and schedule.
• Plan & collaborate across different application teams to manage technical dependencies of the solution.
• Plan, monitor and manage risks/issues related to technical delivery.
• Provide status update related to technical delivery to Project Manager (PM)/ Program Manager.
• Partner with System Analysts, Functional Business Analysts and SME’s to collate, understand and finalize functional and technical requirements.
• Provide Systems input to specification phase (effort estimates, high level delivery plan) based on impact assessment etc.
• Partner with Development Manager in managing application teams to build the enhancements.
• Partner with Test Manager to ensure completion of System Integration Testing (SIT), User Acceptance Testing (UAT), performance / load testing and application security testing with quality results.
• Prepare and manage technical implementation plan across application teams - coordinate technical implementation activities across application teams to ensure non-event production cutover and adequate post implementation support.
• Escalate issues that impacts project schedule on timely basis and propose workarounds/resolutions.

Job Requirements

Technical Skills & Experience

• 10 - 15 years of experience.
• Strong technical knowledge and/or platform knowledge in Open Systems.
• Strong technical knowledge in Spring boot, Microservices, DevOps Systems.
• Good business domain knowledge in Retail and Corporate Loans Origination systems, Business or Credit rules management is a plus.
• Good knowledge in financial services policies, procedures, products and industry practices preferred.
• Experience in implementing large-scale, highly available applications or other large project implementation.
• Experience in service-oriented technologies.
• Proven result-oriented person with a focus on delivery.
• Experience in actual systems development work, with prior coding, functional specifications and technical specifications and systems development and testing experience (in aggregate no less than 8 years).
• Good understanding and experience in software development cycle (Waterfall/Agile best practices).
• Highly effective communicating with technical stakeholders, proficient communicating with non-technical stakeholders.
• Good problem solving, analytical, synthesis, system thinking and solutioning skills.
• Strong negotiation skills and vendor management skills.

Education

• Bachelor's degree in Computer Science, engineering or similar domain.
• Related professional/technical qualification will be advantageous although not mandatory.

Job Description

• Industry/ Organization Type: Accounting Firm (Global)
• Position Title: Audit Manager (Technical & Training)
• Working Location: Central
• Working Hours: Monday – Friday (8:45 AM – 5:30 PM)
• Salary Package: Up to $8,000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Assist with reviewing client/audit team working papers on the appropriateness of asset/ liability carrying amounts measured using fair or recoverable values.
• Perform independent valuations for businesses, intellectual property, financial instruments, etc.
• Conduct market and industry research.
• Construct and analyze financial models.
• Develop financial models and establish best practices, workflows, and procedures in related areas.
• Perform financial modelling and forecasting using various methods and tools.
• Review valuation reports for inaccuracies.
• Identify gaps in valuation reports and suggest improvements.
• Understand and apply financial reporting standards; pose relevant challenges and questions on key inputs and assumptions used by management.
• Guide the team in amending reports to clearly articulate valuation conclusions.
• Engage in technical research and consultations, including writing technical publications, reviewing and developing technical working paper templates and training materials, and facilitating/conducting technical training sessions.
• Review and develop training programs, coordinate and conduct training, and monitor CPE hours for audit professionals.
• Participate in other ad-hoc projects as required.

APPLY NOW!!!

• Bachelor’s Degree in Accountancy or equivalent professional qualification.
• At least 5 years of audit experience, preferably from an international public accounting firm.
• A demonstrated deep passion for specialization in technical research and professional training.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67105 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description & Requirements

• Perform all roles and responsibilities required of site supervisors under the Building Control Act, regardless whether their names are stated in the form,
• Check mock-ups done on site and off site, where necessary,
• Conduct inspection and check as required under Authority Operational and Safety requirements.
• Conduct compliance check on the implementation of mitigating measures in method statement, risk assessment and DfS register.
• Ensure that records of all civil and structural engineering works, mechanical and engineering works including records of tests, defect rectification, inspections, work progress, material and equipment on site, safety, etc, are updated in a timely manner and properly kept,
• Maintain proper and updated daily records of all works done including records of tests, inspections, status of work, variation works, tests, inspections, work progress, safety, site diary, material on site and equipment on site, labour force, day works, provisional items or provisional quantities etc,

Job Requirements:-

• Minimum five (5) years of experience as RTO, of which at least two (2) years shall be in supervision of works similar in nature to the Works
• Diploma in Civil or Structural engineering from a recognized tertiary institution or relevant qualifications.
• Accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore.
• Have a certificate in Workplace Safety and Health Management in Construction Industry or equivalent.
• Possess good analytical ability with strong verbal and written communication skills.

Job Description & Requirements

• Perform all roles and responsibilities required of site supervisors under the Building Control Act, regardless whether their names are stated in the form,
• Check mock-ups done on site and off site, where necessary,
• Conduct inspection and check as required under Authority Operational and Safety requirements.
• Conduct compliance check on the implementation of mitigating measures in method statement, risk assessment and DfS register.
• Ensure that records of all civil and structural engineering works, mechanical and engineering works including records of tests, defect rectification, inspections, work progress, material and equipment on site, safety, etc, are updated in a timely manner and properly kept,
• Maintain proper and updated daily records of all works done including records of tests, inspections, status of work, variation works, tests, inspections, work progress, safety, site diary, material on site and equipment on site, labour force, day works, provisional items or provisional quantities etc,

Job Requirements:-

• Minimum five (5) years of experience as RTO, of which at least two (2) years shall be in supervision of works similar in nature to the Works
• Diploma in Civil or Structural engineering from a recognized tertiary institution or relevant qualifications.
• Accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore.
• Have a certificate in Workplace Safety and Health Management in Construction Industry or equivalent.
• Possess good analytical ability with strong verbal and written communication skills.