Job Responsibilities

• Day-to-day operation and maintenance of District Cooling Plant.

• Monitor and manage chiller operations via Building Management System (BMS).

• Monitor and response to fire detection and fire protection related alarms.

• Maintain daily logs of operational issues and maintenance activities.

• Supervise maintenance and repair job.

• Carry out routine plant inspection and data logging.

Job Requirements

• Diploma/Higher NITEC/NITEC in Electrical/Mechanical/Plumbing/Refrigeration or Building Certificate from a recognized training institute.

• Relevant experience in HVAC, chiller plant would be advantageous.

• IT literacy, e.g. Microsoft Words, Excel, Power Point, etc.

• Able to perform 12 hours rotating shifts and weekends duty.

Job Responsibilities

• Perform assigned operations/maintenance/repair work orders in M&E, infrastructure and building works in throughout the Resort.

• Perform day-to-day inspection, data logging, corrective and preventive maintenance on facilities and system including electrical, mechanical, infrastructure.

• Manage and supervise contractors on maintenance/repairs/renovations/A&A Projects.

Job Requirements

• Higher NITEC/NITEC in Electrical/Mechanical/Plumbing/Refrigeration or Building Certificate from a recognized training institute.

• Relevant experience in plant facility, hospitality, property management operation & maintenance environment would be advantageous.

• Able to perform after office hours when required or 12 hours rotating shifts.

Job Responsibilities

• Responds to Attractions recovery and repair of Ride & Show mechanical, electrical, hydraulic, and pneumatic equipment in USS (Universal Studios Singapore).

• Troubleshoots failed components using basic test equipment, schematics/prints and specialized tools, equipment and resources.

• Report to Team Lead during reset of Ride & Show system to ensure safe operation.

• Support Attractions Operation team on the safe evacuation of guests from Ride vehicles during downtime.

• Operate company forklift or specialised vehicle such as high-reach boom lifts when required for recovery of Rides and Shows (Training will be provided by company.)

• Operate equipment and tools safely in accordance with general handling practices and Safe Work Procedures.

• Logs completion of inspections, corrective action and/or repairs made and listing of applicable parts used.

• Generate the required Work Orders for repair work performed.

Job Requirements

• Diploma in Mechanical/Electrical/Mechatronic Engineering or related field of studies

• 3-5 Years experience in troubleshooting and repair of basic to moderately complex systems which include - electrical/PLC controls, electro-mechanical devices, hydraulic, pneumatic, and mechanical equipment will be an advantage.

• Ability to troubleshoot electromechanical problems and use good judgment in high pressure situations.

• Able to work at height.

• Able to perform 12 hours shift work permanent day and weekends/public holidays.

Benefits:

• 5 Working Days: Monday to Friday: 8:30am to 6pm / 8:00am to 5:30pm / 9:00am to 6:30pm
• Location: Jurong East (walking distance from MRT)
• Work Life Balance

Job Responsibilities:

• Handle end-to-end work pass administration including but not limited application, renewal, issuance and cancellation of work passes for internal, external and outsourced workers timely.
• Maintain work pass administration record tracking and follow-up closely on all work pass transaction.
• Ensure the entire work pass Administration in compliance with MOM Rules & Regulations.
• Advise and monitor all pre-employment medical check-ups for new hires.
• Liaise with MOM and clients on workers or work pass matters.
• Troubleshoot and rectify application issues i.e.. rejected application.
• Daily Operations - arrange drivers for arrival of workers / medical check / courses, vaccination etc.

Additional requirements:

• Possess CEI (Basic) advantageous
• High level of initiative, meticulous and detailed oriented with strong organization skills
• Basic understanding of the prevailing MOM rules & regulations
• 1-2 years relevant experience

Career Highlights:

• Good career advancement opportunities
• Competitive compensation benefits
• Company’s transport available.

Job Description:

• Provide technical support for JD Edwards EnterpriseOne applications, troubleshooting issues and ensuring system availability and performance.
• Collaborate with cross-functional teams to analyze, configure, and implement system enhancements and upgrades.
• Conduct regular system maintenance, including patching, updates, and monitoring system health.
• Offer end-user training and create documentation to facilitate efficient use of JDE applications.
• Respond promptly to user queries, identifying root causes and implementing solutions in a timely manner.
• Participate in the development and execution of test plans for system changes and enhancements.
• Maintain compliance with security standards, ensuring data integrity and confidentiality within the JDE environment.
• Proactively identify opportunities to streamline processes and optimize system performance.

Job Requirements:

• BSc Computer science or similar
• At least 3 years of working experience in providing applications/system support for JD Edwards.
• Working hours: 5 days (Mon-Fri: 8am to 5.30pm)

Resident Technical Officer

Roles & Responsibilities:

• You are to carry out construction supervision of construction works as required under the BCA regulations
• You are to ensure that the design documentation is safely & accurately implemented on site
• You are responsible for the co-ordination of work on site and ensure construction safety
• You will undertake any other related duties as instructed by the Project Managers

Requirements

• Diploma/Degree in Civil Engineering or equivalent from Singapore or other tertiary institutions
• National Certificate on Construction Supervision from BCA or equivalent preferred
• Possess at least 10 years of construction site experience
• Registered as Resident Technical Officer accredited by IES/ACES
• Proficient in MS Word and Excel
• Proficient in Primavera Project Planning Tool
• Familiar in Primavera Project Planning Tool
• Familiar with local codes & regulations
• Good communications and interpersonal skills

Interested applicants are invited to submit your updated resume, stating current/expected salaries to: [email protected]

We regret to inform that only short-listed candidates will be notified.

Job Responsibilities:

• Provide Level 2 support to all IT hardware and Network related matters
• Ad-hoc projects assignment and fulfillment
• Review and improve processes pertaining to Infrastructure related services
• Develop and build quality Service document and procedures
• Enhance and establish Knowledge Management with ITIL as framework
• Handle and coordinate IT system procurement
• Assist in Annual Maintenance of Data center
• System Deployment
• Assist in Data backup and restoration
• Coordinate with vendor on network/hardware/software related matters
• System/network troubleshooting and rectification
• Assist in Annual system Audit
• Asset management
• Any Ad-hoc duties as assigned

Job Requirement:

• Minimum Diploma in related fields
• At least 3 to 7 years of relevant work experiences
• Ability to communicate with people of various levels
• Knowledge in MS office, Printers, MFP, MS Operating systems, Active Directory
• Requires Networking knowledges
• Microsoft certification will be added advantage
• Hands on and a team player
• Strong Problem solving skills.

Others:

• Working Location: Bulim Walk (nearest MRT: Boon Lay)
• Mondays - Fridays: 8:00am to 5:30pm
• Uniform & Lunch provided
• Company transportation at various pickup points (Northern & Western areas of Singapore)

About our Company:

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Supervise construction works, maintain quality control and ensure that the works are carried out in accordance with the project specifications, design intent, approved drawings and site instructions by the supervising qualified persons
• Ensure that site personnel carry out their work in compliance with the prevailing regulations set up by the building authorities and government agencies of Singapore
• Perform tests to check the quality of materials
• Review project drawings and specifications, and raise any discrepancies and/or potential problems to the appointed Qualified Person and relevant stakeholders
• Attend meeting with qualified persons and relevant stakeholders
• Prepare progress reports
• Work under the control and direction of the appointed Qualified Person(s) when carried out his/her duties for the assigned project
• Any other duties as assigned from time to time

Prerequisites

• Diploma/Degree in Civil & Structural Engineering
• Accredited as a C&S Resident Technical Officer (RTO) by Institution of Engineering Singapore (IES) or Association of Consulting Engineers Singapore (ACES)
• Certificate in BCSS (Building Construction Safety Supervision) or other similar construction-safety certification
• Minimum 2 years of experience as a Resident Technical Officer (RTO)
• Able to read and interpret architectural drawings and details of construction projects
• Project Location: Jurong Island (Transport will be provided at designated pick-up points)

To provide executive support to Centre Director, as well as all the administrative processes related to the centre such as HR matters, student matters, finance matters, publicity and events support.

Key Responsibilities:

• Track and manage the Centre’s assets, funding, procurement, manpower and space resources.
• Manage the Centre’s special programmes and daily operations.
• Prepare progress reports, audit and budget statements in a timely manner.
• Provide updated and organized data capture and management on centre information.
• Be part of the working team to ensure that the Centre operates at maximum efficiency and complies with policies, procedures and standards.
• Provide workshop/conferences/events support and visits to the Centre.
• Serve as a liaison to internal and external stakeholders.
• Provide effective executive support to Centre Directors.
• Continual review of work processes for improved efficiency and effectiveness in administration.
• Any ad-hoc duties assigned by Centre Directors.

Job Requirements:

• A degree in any discipline from a recognized university with at least 3 years of relevant working experience. Applicants with working experience in a university capacity preferred.
• Strong interpersonal & written skill
• Strong analytical and problem-solving skills
• Meticulous, adaptable and able to multi-task
• Able to work independently
• Proficient in Microsoft Office applications

Job Responsibilities:

• Attend to sales enquiries, quotations and responding to customer enquiries.
• Manage RFQ, review quote package, generate accurate and detailed quote summary for review.
• Liaise with purchasers on cost involving on the sales enquiries or quotations.
• Follow up with customers regarding quotations.
• Collaborate with internal resources to identify the make/buy logic for the bill of materials.
• Apply work knowledge to improve quote formats and output efficiency.
• Others ad-hoc duties may be assigned.

Requirements:

• Nitec/Higher Nitec or Diploma in Mechanical/Precision Engineering.
• Proficient in Microsoft Excel.
• Familiarity or experience on CNC machining or precision engineering environment preferred.
• Well verse in Microsoft Office.
• Able to interpret mechanical/technical drawings, bill of materials, specifications and Geometric dimensioning and tolerancing (GD&T).
• Familiar with CNC metal machining process like turning and milling etc.
• Pleasant personality and able to communicate well with customers for their request.
• Meticulous, excellent with details.
• Knowledge of SAP is an advantage.

• Manage targeted orders and monitor delivery status;
• Attend to inbound calls from customers;
• Handling incoming enquiries, complains and feedback and resolve them in accordance with the company’s standards;
• Resolve all in scope enquiries and take appropriate escalation actions when required;
• Provide alternatives solutions with excellent customer service via phone calls and emails;
• Follow-up with customer, when necessary, in a timely manner;
• Liaise with internal department to solve customer’s issue;
• Coordinate with delivery team on orders;
• Coordinate and provide sales support to the sales team;
• Maintain proper filling system;
• To perform any ad hoc assignments as assigned by immediate superior

Job Requirements

• Meticulous and detail oriented as the job requires documentation work;
• Able to work in fast pace environment;
• Excellent telephone etiquette with passion in customer service;
• Possess initiative to respond to customers’ needs with a commitment and customer service skills;
• Proficient in MS Office
• Good team player

Job Description

• Industry Type: Ship
• Working Location: Boon Lay
• Working Hours: 5.5 days (Alternate Saturday)
• Duration: Permanent Role

Responsibilities

· Responsible for managing the incoming and outgoing orders

· Handle Import/Export permit declarations, custom clearance

· Maintain accurate records of shipping documents as per SOP standards

· Arrange and coordinate import/export shipments

· Coordinate sea/ air freight shipments and transport arrangement

· Liaise with air/sea freight forwarding, shipping lines, transporters to ensure timely delivery of shipment

· Process shipping operation and courier service

· Handling of all billing and invoices

· Ad-hoc duties as and when required

Requirements

· Diploma or equivalent

· With 1 – 3 years of relevant experience

· Proactive and positive working attitude

· Meticulous with good organizational skills

· Proficient in MS Office

· Good interpersonal skills and able to work independently with minimum supervision

The Renaissance Engineering Programme (REP) is one of the key programmes under the NTU Premier Scholars Programmes (PSP) to nurture students as future leaders of industry. It is a broad-based, inter-disciplinary programme which integrates engineering, science, business, technology management and humanities and prepares students to be future-ready. Other than studying locally, students have the opportunity to spend the third year overseas at one of the renowned partner universities, with professional attachment.

The Senior Executive’s primary role is to provide administrative and operational support for the undergraduate academic and examination matters under the REP. The position will play a pivotal role in providing general administrative support for overseas exchange to students, annual admission exercise and alumni. In addition, the position will support the digital media activities, outreach, student engagement, publicity and accreditation matters.

• Provide administrative support for examination matters including supporting the Board of Examiners meeting, examination timetabling and post examination analysis
• Provide administrative support for the Overseas Exchange Programme such as pre-departure administrative matters, course mapping, post exchange credit transfer and professional attachment matters
• Develop a digital media strategy for the programme and provide support for student and alumni engagement activities, outreach events and publicity matters
• Provide administrative support for annual admissions exercise and accreditation exercise

Requirements:

• Recognised Degree in any discipline
• At least 3 years of relevant working experience preferably in a tertiary institution
• Prior experience in programme management and operations in an institute of higher learning would be an advantage
• Good knowledge of IT skills in Microsoft applications
• Strong analytical thinking and communication skills, both written and verbal
• Good interpersonal skills with a genuine interest in interacting with students
• Strong in contents management and marketing for social media and website
• Good organisational skills and able to attend to details

The Sales Support Administrator is responsible for providing administrative and documentation support to the Sales Team to win orders.

Duties & Responsibilities:

• Provide administrative and documentation support to the Sales Team
• Work with Sales Team on preparation of Quotes
• Review customer requirements with Sales Team to ensure accurate sourcing of quotes from vendors/suppliers
• Liaise with vendors/suppliers to obtain best prices and lead-time in a timely manner
• Generate weekly and monthly reports for the Sales Team
• Track inbound enquiries and monitoring their progress

Qualifications:

• Candidate should ideally possess a Diploma
• Good communication and interpersonal skills.
• Self-driven individual with a positive learning attitude.
• Basic knowledge in ERP systems is a plus
• Candidates with no experience are also welcome to apply. On the job training will be provided.

DREX-CHEM TECHNOLOGIES PTE LTD

The DREX-CHEM GROUP is a successful leader in the distribution of specialty chemicals, resins, pigments, printing consumables & equipment etc in ASEAN and Hong Kong/China. We have immediate vacancies for :

Customer Service Representative (Admin)

(Ability to Work in TUAS of Singapore Should Only Apply!)

Responsibilities :

· Responsible for processing customers' orders,

. Managing inventory and perform purchasing functions with shipment follow up;

. Communicate and coordinate effectively with internal departments;

Requirements:

• GCE ‘O’ or ‘N’ level or qualifications with credit in English and relevant experience are welcome.
• At least 3 years' experience in Customer Service;
• Some knowledge of import and export handling;
• Some inventory control knowledge;
• With Microsoft Excel intermediate level;
• Stay in Singapore;
• Able to start work within short notice or immediately.

· Training will be provided

· Adaptable, independent with pleasant personality and a team player;

· Able to interact with all levels of people;

· 5-day week with transportation provided from Joon Koon MRT Station.

. Applicants who are able to work in TUAS should only apply.

The Company offers excellent career advancement program with attractive remuneration packages for performers. Interested applicants are invited to apply or email before 8 February 2024 with full resume, current and expected remuneration details and a photograph to:

Drex-Chem Technologies Pte Ltd

1 Tuas, Avenue 16.

Singapore 638924.

Attn : HR Manager

Or email to : [email protected]

Job Description & Requirements

ASNT NDT Level III, PCN NDT Level III, Advanced NDT Specialist

Familiarisation of ASME & API Codes & Standards

Ability to assume full technical responsibility for clients’ NDT facilities.

Proven experience of providing solutions to clients’ NDT inspection related problems.

Maintain all of equipment and consumable storage in the store room to be ready for using with good conditions under acceptance criteria specific by client or international standard.

Willingness to be flexible and multi-task as part of a team, and contribute to company objectives.

Strongly motivated to achieve results, with a high degree of professionalism, honesty and integrity.

Excellent organizational and time management skills, able to priorities workloads with competing deadlines.

Good written skills to produce coursework and training materials, as well as clients’ NDT procedures, written practices, techniques and audit reports.

Provide internal trainiand technical guidance for other inspectors

Ensure that all personal certification is kept up to date.

Develop and approve NDT procedures, written practices and NDT techniques to a high standard that comply with clients

Creative skills to plan and deliver lessons in a professional, positive and engaging manner.

Ensure adequate training and cross checking the site works, share knowledgewith team members and contribute to team development.

To analyse work plans and projects, and as well as recommendations of every working unit; and to give advice on safety measures to the employer.

Feedback on revised Equipment’s and software’s for improvement.

Feedback after testing the new equipment on site for improvement.

Extensive knowledge of own subject area with extensive industrial NDT experience holding multiple NDT method Level III certification ASNT (RT,PT,UT,MT,VT,ET) /CSWIP (PAUT/TOFD)

Preferable:

Master's degree in NDT

Bachelor degree in Mechanical Engineering

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Job Responsibilities:

• Attend to sales enquiries, quotations and responding to customer enquiries.
• Manage RFQ, review quote package, generate accurate and detailed quote summary for review.
• Liaise with purchasers on cost involving on the sales enquiries or quotations.
• Follow up with customers regarding quotations.
• Collaborate with internal resources to identify the make/buy logic for the bill of materials.
• Apply work knowledge to improve quote formats and output efficiency.
• Others ad-hoc duties may be assigned.

Requirements:

• Nitec/Higher Nitec or Diploma in Mechanical/Precision Engineering.
• Proficient in Microsoft Excel.
• Familiarity or experience on CNC machining or precision engineering environment preferred.
• Well verse in Microsoft Office.
• Able to interpret mechanical/technical drawings, bill of materials, specifications and Geometric dimensioning and tolerancing (GD&T).
• Familiar with CNC metal machining process like turning and milling etc.
• Pleasant personality and able to communicate well with customers for their request.
• Meticulous, excellent with details.
• Knowledge of SAP is an advantage.

RESPONSIBILITIES

• Perform the designs using in-house adsorption tools.
• Prepare the simulation files for SRU/TGU catalyst using Hysys.
• Prepare the simulation files for HPC using in-house tool.
• Prepare the technical proposal to meet the customers’ RFQ requirements.
• Provide on-site service for catalyst and adsorbent loading and start-up
• Support business manager on technical inquires.
• Resolve technical issues quickly and effectively at customer site or remotely.
• Develop technical services plan and execute the plan to meet customer expectation and demand.
• Carry out on-site excellent technical services and adhere to best practices standard.
• Prepare the Technical Service Visit Report
• Prepare various technical reports and presentations (internal and customer) and assures consistent communications.
• Work with other functions to develop value-added services relative to technical services

REQUIREMENTS

• Bachelor’s Degree in chemical engineering or Chemistry
• Minimum 3 years of experience in related industrials e.g. Oil refining and Petrochemical
• Comprehensive knowledge of Chemical Engineering
• Comprehensive knowledge of refining and petrochemical plant
• In-depth Microsoft Excel and Power Point skills

Technical Officer (Maintenance- Instrumentation & Control)

West – Jurong Island, pick-up near Jurong East MRT Station

Responsibilities:

• Carrying out Preventive and Corrective maintenance in accordance with maintenance plans and as work requests raised in the system.
• Maintaining accurate and up-to-date records of all activities performed in the associated systems.
• To perform all jobs in accordance to safe working practices followed in the plant.
• Interact with Operation Staff on maintenance works.
• To assist, supervise contractors assigned for specific works.
• Contributing to the development of asset maintenance plans
• To monitor and take appropriate action to maintain critical spares.
• Assist in liaising with external agencies for all regulatory compliances.
• Responding to emergencies in plant

Requirements:

• Preferably Degree or Diploma in Electrical or Electronics Engineering or equivalent College degree may be waived if equivalent, extensive related experience can be demonstrated.
• Skill sets required – through knowledge on types of process instruments, calibration of instruments/gauges, understanding of control/instrument drawings pneumatic/hydraulic circuits, computers, knowledge in PLC and DCS would be added advantage
• At least 3 to 5 years of relevant experience in a similar capacity, within a Power plant or related Industries.
• Self-motivated independent and has sound analytical and communication skills and is a team worker.
• May be required to work beyond office hours & weekends.

Others:

• Working location: Jurong Island
• 5-day work week
• Company transport provided from Jurong East MRT

Interested applicants, please forward your detailed resume including your last drawn salary, expected salary and date of availability to:

[email protected]

Please indicate the position that you are applying on the subject.

(All applications will be treated in strictest confidence. We regret that only shortlisted candidates will be notified)

By submitting your personal data and/or resume to PacificLight (“us”) or to [email protected], you shall be deemed to have given consent to us collecting, using, and disclosing your personal data for the purpose of assessing your job application. Information collected may also be disclosed to PacificLight Group of Companies (“PacificLight”) which includes PacificLight Power Pte. Ltd and PacificLight Energy Pte. Ltd. for this purpose. Please read our privacy policy here.

JD:

• Provide technical support in the area of database administration, focusing on technology, strategy and operations
• Should be well versed in diversified database technologies – SQL,
• Should have working experience of SQL Server versions 2005, 2008, 2008 R2 and 2012
• Installation, configuration and Upgradation of SQL Server software, Service Packs and Hotfixes
• Ability to implement and troubleshoot High Availability Techniques Like Always on, Database Mirroring ,Cluster Management, Log Shipping and Replication
• Should have experience on Query Optimization and Query Execution plan Analysis
• Ability to understand T-SQL queries and business logic implemented in Stored Procedures
• Monitoring and Alert Setup
• Tuning, Indexing and optimizing databases
• Expertise in using the ADutilities (adpatch, adadmin, rapid clone, autoconfig, merging patches)

• 5-10 years of hands-on application management experience, preferably in the Asset Management business
• Strong skills in Windows batch, Tectia scripting, MS SQL Database, BMC Control-M Scheduler
• Good team player, Independent , proactive and self-starter with excellent interpersonal and communication skills
• Basic understanding of the front to back of Asset Management operations
• Experience working in an ITIL-driven environment, and working knowledge of ITIL principles

NTU Shared Services (NSS) is a centralized unit within Nanyang Technological University (NTU) that provides a wide range of administrative, operational, and support services to various departments and units within the university. Its primary goal is to streamline and optimize processes, enhance operational efficiency, and deliver high-quality services to support NTU's core mission of education and research.

The NSS Technical Support Executive is responsible for providing effective IT/AV technical support role, in relation to the generic desktop/ laptop PCs, mobile devices, Audio Visual (AV) equipment, as well as NTU campus software. This includes problem diagnosis, configuration, installation, and general troubleshooting of IT/AV systems and applications, adhering closely to the Service Levels Agreements (SLAs) and policies set by the organization.

Responsibilities:

• Provide on-site Level 1 & 2 Support in relation to IT/AV- related service disruptions at the Common Teaching Facilities (Lecture Theatres, Tutorial Rooms and Meeting Rooms), One Stop Tech Lounge and Schools/Faculties.
• Diagnose and troubleshoot IT/AV equipment faults and application errors, to restore service provision.
• Troubleshoot technical problems of low to medium complexity, resolution to resolve these incidents.
• Assist in replacing generic IT/AV equipment parts and peripheral components for servicing, as required, and liaising with multiple vendors.
• Provide IT/AV technical support as assigned, in response to ad-hoc manpower request from Local Units (including providing AV support for events, video conference/ meeting/ interview support).
• Respond to all technical emergencies raised by NSS Service Desk.
• Provide face to face IT support by appointment at One Stop Tech Lounge.
• Facilitate processing and tracking of other administrative activities.
• Document IT/AV related problems and resolution procedures in Knowledge Base for future reference.
• Maintain technical documentation related to configuration of IT/AV equipment and components.
• Carry out Asset management in accordance with NTU policy and procedures. Keep track of the IT/AV asset movements at the respective storeroom locations.

Requirements:

• Minimum GCE “A”-levels / Diploma in Information Technology with 2 years of relevant working experience
• Proficient in problem diagnostics and resolution, with the ability to work autonomously
• Good working knowledge on desktop operating systems including Windows 10 and above, Macintosh OS, and associated generic applications
• Working knowledge on other IT domains, including software, hardware, servers and network operations
• Working knowledge in handling/operations on audio/video equipment and its infrastructure
• Preferred experience on programming, ServiceNow, data integration and ITIL Certified

Key Responsibility

As Technical Delivery Manager (TDM) for Data Governance initiatives, you will be responsible for overseeing and ensuring the successful implementations. The role involves coordinating with cross-functional teams, understanding business requirements, and ensuring the alignment of technical solutions with data governance objectives. Key responsibilities for this role are:

•

Project Leadership: Lead planning, execution, and delivery of Business Glossary, Metadata management and Data lineage solution, ensuring alignment with organizational goals and objectives.

•

Requirements Analysis: Collaborate with business stakeholders to gather and analyse requirements, translating them into actionable project plans.

•

Tool Selection and Implementation: Oversee selection and implementation of metadata management tool, ensuring it meet the organization's needs and integrate effectively with existing systems. Conduct POCs involving new data technologies. Prioritize implementation scope for incremental coverage; Independently install, customise and integrate software packages and programs. Maintain and recommend software improvements to ensure a platform centric management of software applications

•

Lifecycle Management: Manage full lifecycle of metadata management and data lineage initiatives, from conception and design to implementation, maintenance, and optimization of end to end data lineage extraction; provide remediation for broken data lineage across multiple technologies, products and platforms. Review & deliver documents such as solution design, program specifications for target solutions

•

Cross-Functional Collaboration: Work closely with cross-functional teams, including data stewards, IT professionals, and business analysts, infrastructure & information security teams, to ensure a cohesive and integrated approach to metadata management and data lineage; Create frameworks, technical features which helps in establishing end to end data lineage for Critical Data Elements

•

Quality Assurance: Implement quality assurance processes to ensure the accuracy, consistency, performance & SLA monitoring and completeness of metadata and data lineage information in SIT, UAT and production environment

•

Vendor Management: Coordinate with vendors providing metadata management solutions, overseeing their contributions to the successful implementation of the projects.

•

Project Management & Risk Management: Plan, execute, and deliver metadata management and data lineage projects within scope, on time, and within budget. Identify and mitigate risks associated with metadata management and data lineage projects, ensuring compliance with industry standards and regulations.

•

Training and Documentation: Provide inputs for training programs and ensure documentation to enhance understanding and adoption of metadata management and data lineage best practices within the organization.

•

Performance Monitoring: Establish key performance indicators (KPIs) to monitor the performance of metadata management and data lineage initiatives, making adjustments as needed to meet objectives.

•

Stakeholder Communication: Maintain transparent and effective communication with stakeholders, providing regular updates on project progress, challenges, and resolutions. Convey technical concepts to non-technical stakeholders in simple ways.

•

Continuous Improvement: Drive continuous improvement initiatives, staying abreast of industry trends and emerging technologies to enhance Business Glossary, Metadata management and Data lineage capabilities within the organization.

Technical & Functional Skills

Technical Skills

•

8+ years of experience in implementing data governance solutions with a strong background in deploying such solutions, encompassing both on-premise and cloud-based models.

•

Metadata Management Tools: Proficiency in using metadata management tools such as Informatica IDMC, IBM Watson Knowledge Catalog or equivalent tools (Collibra, Alation, Solidatus)

•

Data Lineage Tools: Experience with data lineage tools like Informatica IDMC, IBM Manta or similar solutions to establish and visualize end-to-end data flows. Identify and build both business and technical lineage, including strategies for fixing lineage breaks

•

Database Technologies: In-depth knowledge of various database technologies, including but not limited to Hadoop, Teradata, SAS, Oracle, Postgres, and Cassandra DB.

•

ETL/ELT Tools: Expertise in ETL/ELT tools like Informatica PowerCenter, SSIS, and other data integration platforms to understand and document transformation logic.

•

Scripting and Programming: Proficient in scripting languages (e.g., Bteq scripts, Spart ETL) and programming languages to support metadata extraction and manipulation.

•

Cloud Platforms: Familiarity with cloud platforms (e.g., AWS, Azure, GCP) and their services relevant to metadata management and data governance. Strong background in addressing security considerations for cloud-based implementations is crucial, demonstrating the ability to design and implement secure solutions in alignment with industry standards.

•

On-Premise Container Solutions: Expertise with Red Hat Open Container Platform; showcasing proficiency in overcoming complexities related to deploying, managing, and optimizing applications in this environment. Integrate various components seamlessly and ensure a cohesive and efficient operation within the OpenShift cluster

•

Visualization Tools: Experience with data visualization tools such as Qlik, Microsoft Power BI, Tableau to create intuitive representations of metadata and data lineage.

•

Knowledge in Data modelling, working with calculations, leveraging the Set Analysis

•

Experience in Implementing RBAC policies for various user groups such as Data Owners, stewards, consumers/stakeholders etc within the metadata management tool

•

Implementation of out-of-the-box as well as custom workflows, user personas, custom reports / dashboards within the metadata management tool

•

Functional Skills

•

Business Glossary Management: Strong understanding of business glossary concepts and the ability to work with business stakeholders to define and manage business terms and their relationships.

•

Data Governance Frameworks: Knowledge of data governance frameworks and best practices, including BCBS239, and the ability to implement governance policies for metadata and data lineage.

•

Regulatory Compliance: Understanding of regulatory requirements related to data management, ensuring compliance in metadata and data lineage implementations.

•

Should have worked in large scale data warehouse & on-premise Power BI, Qlik based visualisation

Other Critical Skills

•

Strong analytical and problem-solving skills to address challenges related to metadata quality, data lineage accuracy, and overall data governance effectiveness

•

Fast Learner, enjoy analytical and data modelling work and proactive in providing solutions

•

Good interpersonal and communication skills with attention to details

•

Be forward looking and agile to adapt to changing bank’s needs and dynamic working environment

•

Identify ideas to improve system performance and impact availability

•

Embrace tackling and resolving complex technical design issues

•

Possess strong problem solving and decision-making skills while exercising good judgment

•

Ability to work on multiple projects at a time

•

Be able to work under pressure and manage deadlines or unexpected changes in expectations or requirements

•

Ability to work in a team distributed across multiple locations

•

Qualification / Certifications

•

Degree in Computer Science or related discipline

•

Certification of leading data governance product providers (Informatica, IBM, Alation, Solidatus, Collibra etc.)

Highlight

• Top-notch Exadata specialist Experience in RAC, ASM, Dataguard, Infiniband switch, storage cell

• Experience in Exadata health check, migration, resource management and patching/upgrade

• Expertise in database performance tuning Expertise in Backup and recovery Basic

Requirement

• 10-12 years of production support experience as Oracle DBA with at least 6 years of strong experience on Exadata platform

• Demonstrable experience of managing high-performance, high-capacity databases in a critical production environment.

• Solid Oracle 11gR1/R2 RAC experience including build, general administration, troubleshooting (Break/Fix) and performance tuning skills

• Experience in Clusterware (GRID Infrastructure) - CRS management and configuration Skilled in Oracle ASM and Dataguard administration

• Expertise in SQL & Database Level performance tuning skills Expertise in backup and recovery and migration using RMAN, datapump and export/import.

• Experience in maintenance and management of databases using Oracle Enterprise Manager Grid Control.

• Experience on Solaris, Linux and AIX OS including strong shell scripting skills. Willingness to work in 24*7 Global support model.

• Aid development teams for analyzing issues.

• Excellent troubleshooting, diagnostic & analytical skills.

• Excellent communication & coordination skills is required. Strong initiative and sense of ownership.

• Expert knowledge of database scripting and automation technology

• Excellent written and verbal communications

• Experience working with offshore vendors Builds positive working relationships, works collaboratively with other team members, and is a team player.

• Experience in a large corporate environment Competent in Change/Release Management ( ITIL based – preferably ITIL Foundation Certified)