Job Description:

Arrival / Departure / Towing / Ground Support Equipment

• To perform Aircraft Docking Guidance System (ADGS) and manual marshalling of aircraft
• To perform inspection of bays and ensure no Foreign Object Debris (FOD)
• To install / remove wheel chocks and grounding cables
• To connect / disconnect tow bar to the air tug
• To deliver ground support equipment including maintenance steps
• Any other duties as assigned by the supervisor

Requirements:

• Minimum NITEC in Engineering or equivalent with 1 years of working experience in Airline industries is preferred.
• Comfortable with 12 hours shift work arrangement
• Candidate with LTA Class 3/4/5 license will have added advantage

Job Responsibilities:

• To carry out preventive maintenance on all vehicles in accordance with the given servicing task sheet
• Standby and provide onsite recovery of unserviceable vehicle
• Carry out minor spray-painting ad touch up as per requirement
• Inspection of air conditioning system and in vehicle camera and ensure the serviceability
• To carry out corrective maintenance arising from vehicle failure or breakdown within the stipulated period, including outside operating hours
• Check for on-site condition of tyres, expire or damaged fire extinguisher, batteries and other requirements required.
• Perform daily housekeeping
• Any other tasks required by the superiors

Job Requirements:

• Minimum NiTEC / Diploma in Automotive Engineering or equivalent.
• At least 1 years of working experience in Automotive industries.
• Comfortable with shift work arrangement.
• SingaporeClass 3/4/5 or Malaysia Class D/E driving license required
• Working Hours: Mon-Fri: 0830 to 1730, Sat: 0830 to 1230

Job Description:

• Perform functional and aesthetic inspection of aircraft cabin interiors.
• Document any defects, perform troubleshooting and carry out rectification.
• Support cabin modification, retrofitting and component repair tasks.
• Any other duties as assigned by the supervisor

Requirements:

• NITEC / Higher NITEC, preferably in an Engineering discipline
• At least minimum 2 years of relevant aircraft cabin maintenance experience
• Must be Able to perform rotating shift work including weekends

Job Description:

• Assist in checking of aircraft components and consumables availability
• Ordering and monitoring of ad-hoc aircraft components and consumables required.
• Updating Daily Spares Shortage list and track task completion
• Communicate with Engineers on spares availability
• Performing credit back of unused spares
• Perform installation/dismantling of aircraft components on SAP
• Managing 3rd party spares inventory
• Communicate with Customer Support team when required.
• Carry out any other tasks as assigned by Supervisor or Executive.

Requirements:

• Minimum Higher Nitec in Aerospace Engineering or Equivalent
• Good communication in written and spoken in English.
• Able to work in dynamic and fast-moving environment.
• Highly organized and computer literate.
• SAP experienced preferred.

Key Responsibilities:

Daily Tool Store Operations:

• Handle the receipt, documentation, storage, and distribution of aircraft tools.
• Ensure safety and proper management of tools.
• Maintain a 5S environment within the tool store.

Tool Calibration and Safety:

• Ensure tools are calibrated and that lifting gear undergoes timely load testing and visual inspections.
• Track the expiry dates of tools and equipment.

Vendor Liaison:

• Coordinate with vendors for the purchase, repair, and maintenance of aircraft tools.

Record Keeping and Compliance:

• Maintain accurate records for operations and training.
• Coordinate for authority and customer audits.
• Keep up with the paperwork related to tool management.

Equipment and Vehicle Maintenance:

• Oversee the upkeep and maintenance of department equipment, tools, and vehicles.
• Manage the maintenance and repair program for aircraft tools, either troubleshooting in-house or liaising with external vendors.

Staff Training and Safety:

• Train staff on minor troubleshooting for tools and equipment.
• Conduct briefings on technical handling and safety issues for staff.

Miscellaneous:

• Perform any additional duties as assigned by the Operation Executive.

Requirements:

• Education: Higher NITEC or Diploma in Logistics/Supply Chain or a related discipline.
• Experience: Preferably at least 2 years of relevant work experience.
• Skills:Knowledge of SAP is an advantage.
  Strong analytical, interpersonal, and communication skills.
  Proficiency in Microsoft Office.
  
• Other:Ability to work in a team environment.
  Class 3 driving license.
  Willingness to work overtime and on weekends when necessary.

Job Responsibilities:

• Supervise term contractors in the maintenance of properties and facilities to accomplish maintenance program schedule, compliance to regulatory requirements, and to achieve operational efficiency
• Manage and review service contracts to meet facilities management targets and to achieve cost-effective operations
• Conduct schedule site inspection and KPI audit
• Plan and supervise building and facilities upgrading projects
• Prepare job specifications for tender/quotation exercise, evaluation submissions and recommend contract award
• Monitor and maintenance services expenditure
• Process invoice verification
• Any other duties assigned

Job Requirements:

• Diploma in Mechanical or Electrical Engineering, or Integrated Facility Management
• Minimum 1 years of working experiences in Projects & Facilities Management and Sustainability
• Experience in supervising external contractors for maintenance of properties and facilities
• Proficiency in MS Office
• Possess Project management skills
• Good analytical, interpersonal and communication skills
• Able to be a good team-player
• Able to work under pressure
• Fresh graduates are welcome to apply

Job Responsibilities:

• Manage the maintenance and daily operations of the building facilities with the objective of always achieving uninterrupted function
• Ensure contractor service level agreements and key performance indicators are met or exceeded
• Perform routine facilities activities including onsite inspection, fix-it verification, critical systems checks, functional testing, etc. Able to respond and act in response to facilities crisis management activities including power outages, fire alarms, and HVAC outages.
• Analyse data and identify trends with facility issues to determine the root causes and take appropriate action
• Respond to BMS alerts, investigate and feedback on any outstanding issues or events and respond to emergency situations and be on standby duty as required
• Assist in all site construction activities and installations, in coordination with external contractors to ensure system design, installation and testing adhere to operational standards.
• Maintain compliance with Workplace Safety & Health (WHS) standards and electrical and building codes
• Ensure adherence to all standard operating procedures (SOP), method of procedures (MOP), and emergency response procedures (ERP) established for the critical environments, as well as the formal change control process
• Participate in the scheduling, coordination, and completion of all significant planned and emergency maintenance events fo the facility and ensure these activities are executed in a controlled and proven method to ensure the reliability of the critical loads supported by these systems
• Plans, monitors, schedules, and implements measures on the Planned Preventive Maintenance Program for the company buildings and also ensures that the work is done in accordance with schedule and specification
• Provides technical support and take charge on matters concerning the parts replacement and repairs maintenance and service activities of all the mechanical & electrical equipment
• Liaise with contractors and suppliers regarding improvement works and purchasing of equipment and spare parts
• Prepares weekly and monthly building reports
• Planning building maintenance and operational programs for the awarded IFM contracts
• Liaison with all stakeholders, attend to stakeholders’ feedback and ensure a smooth operation of facilities. Ensuring efficiency of all building systems
• Preparation of budget and budget controls
• Ensuring all processes and compliance programs are met
• Familiar in administration and functioning of CMMS/FMS software for monitoring, reporting, data analysis and audit.

Requirements - Facilities Engineer

• Degree in Facilities Management or equivalent qualification or Diploma holder in equivalent qualification with more than 5 years relevant experiences
• Preferably with a minimum of 3-5 years' experience in Facilities Maintenance, Project Management.
• Able to comprehend, analyse and interpret complex project documents, including AutoCAD, Visio, and PDF documents.
• Technical and functional knowledge of building infrastructure including electrical and mechanical systems, fire detection and protection systems, building management systems, equipment maintenance, and construction of critical facilities environment.
• Possess Project management skills
• Good analytical, interpersonal and communication skills
• Able to be a good team-player
• Able to work under pressure

Job Responsibilities:

• To carry out preventive maintenance on all vehicles in accordance with the given servicing task sheet
• Standby and provide onsite recovery of unserviceable vehicle
• Carry out minor spray-painting ad touch up as per requirement
• Inspection of air conditioning system and in vehicle camera and ensure the serviceability
• To carry out corrective maintenance arising from vehicle failure or breakdown within the stipulated period, including outside operating hours
• Check for on-site condition of tyres, expire or damaged fire extinguisher, batteries and other requirements required.
• Perform daily housekeeping
• Any other tasks required by the superiors

Job Requirements:

• Minimum NiTEC / Diploma in Automotive Engineering or equivalent.
• At least 1 years of working experience in Automotive industries.
• Comfortable with shift work arrangement.
• SingaporeClass 3/4/5 or Malaysia Class D/E driving license required
• Working Hours: Mon-Fri: 0830 to 1730, Sat: 0830 to 1230

Job Description

• To perform sewing of upholstery, making templates and sewing sample
• To calculate the materials dimension and template according to customer requirement.

Job Requirements

• Secondary education or equivalent with sewing experience.

Job Description

• Troubleshoot and repair of hydraulic and electrical system for Aircraft Tow Tractors, GPU (Ground Power Unit), ACU (Air Conditioning Unit), ASU (Air Starter Unit), etc.
• Ensure preventive maintenance is carried out properly in accordance with approved documents
• Ensure proper and accurate details filled up and signed off on job card and task sheets upon completion of work
• Ensure equipment is in working/serviceable condition before releasing to user
• Perform modification on electrical wiring as necessary with approved documents or data as per OEM recommendation

Requirements

• Minimum Professional Certificate/NiTEC in Engineering (Electrical/Electronic) or equivalent with 1 - 2 years of working experience in Automotive industries
• Candidate with LTA Class 3/4/5 license will have added advantage

Job Description

• To carry out preventive maintenance on all vehicles in accordance with the given servicing task sheet
• Standby and provide onsite recovery of unserviceable vehicle
• Carry out minor spray-painting ad touch up as per requirement
• Inspection of air conditioning system and in vehicle camera and ensure the serviceability
• To carry out corrective maintenance arising from vehicle failure or breakdown within the stipulated period, including outside operating hours
• Check for on-site condition of tyres, expire or damaged fire extinguisher, batteries and other requirements required.
• Perform daily housekeeping
• Any other tasks required by the superiors

Requirements:

• Minimum NiTEC/Diploma in Automotive Engineering or equivalent.
• At least 1 years of working experience in Automotive industries.
• Singapore Class 3/4/5 or Malaysia Class D/E driving license required

Job Responsibilities:

• Perform seat cover change, dressing up of seats, replacement of aircraft cabin carpets and curtains.
• Perform collection of parts for the above services from designated collection point and return removed items back to designated point

Job Requirements:

• Able to work in a hot and humid environment
• Able to understand instructions in English
• Experienced in upholstery work preferred
• Must be able to perform shift work

Job Description:

Arrival / Departure / Towing / Ground Support Equipment

• To perform Aircraft Docking Guidance System (ADGS) and manual marshalling of aircraft
• To perform inspection of bays and ensure no Foreign Object Debris (FOD)
• To install / remove wheel chocks and grounding cables
• To connect / disconnect tow bar to the air tug
• To deliver ground support equipment including maintenance steps
• Any other duties as assigned by the supervisor

Requirements:

• Minimum NITEC in Engineering or equivalent with 1 years of working experience in Airline industries is preferred.
• Comfortable with 12 hours shift work arrangement
• Candidate with LTA Class 3/4/5 license will have added advantage

Job Description:

Arrival / Departure / Towing / Ground Support Equipment

• To perform Aircraft Docking Guidance System (ADGS) and manual marshalling of aircraft
• To perform inspection of bays and ensure no Foreign Object Debris (FOD)
• To install / remove wheel chocks and grounding cables
• To connect / disconnect tow bar to the air tug
• To deliver ground support equipment including maintenance steps
• Any other duties as assigned by the supervisor

Requirements:

• Minimum NITEC in Engineering or equivalent with 1 years of working experience in Airline industries is preferred.
• Comfortable with 12 hours shift work arrangement
• Candidate with LTA Class 3/4/5 license will have added advantage

Job Description:

• Assist in checking of aircraft components and consumables availability
• Ordering and monitoring of ad-hoc aircraft components and consumables required.
• Updating Daily Spares Shortage list and track task completion
• Communicate with Engineers on spares availability
• Performing credit back of unused spares
• Perform installation/dismantling of aircraft components on SAP
• Managing 3rd party spares inventory
• Communicate with Customer Support team when required.
• Carry out any other tasks as assigned by Supervisor or Executive.

Requirements:

• Minimum Higher Nitec in Aerospace Engineering or Equivalent
• Good communication in written and spoken in English.
• Able to work in dynamic and fast-moving environment.
• Highly organized and computer literate.
• SAP experienced preferred.

Job Description

Key Responsibilities

• Presents standard or moderately customized technical training courses using prepared or customized materials; conducts training at customer sites which may involve both domestic and international travel of short duration; manages classroom/lab activities to assure fulfillment of course objectives; presents and practices safety per procedure; may train during off-shift and/or weekends as assigned.
• Learns and maintains a level of product technical knowledge sufficient to prepare and present defined product courses; completes certification on all product related courses to include safety modules; complete certification on second platform and/or processes; actively certifies others.
• With assistance, develops technical training materials to include new courses for new products requiring System Business Units research and collaboration; frequently develops customized training materials per customer needs; creates new teaching media; creates and augments documentation to fill gaps in released materials; provides training and guidance to other department personnel in the standard course development process and in Instructional System Design.
• Will review system maintenance activities; helps to system functionality can support course objectives; ensures all safety retrofits are installed on the training systems.
• Is knowledgeable of the technical training organization and operations and the AGS organization; helps to market technical courses/products available; assists in building customer relationships and selling technical training products.
• Interface skills in dealing with customers and employees; anticipates, prevents and resolves customer satisfaction issues.
• Communicates periodically with product groups to obtain current product information for course updates; represents technical training at routine divisional meetings and internal conferences; functions as lead on projects of moderate scope and complexity.
• Supports GPS in the generation of docs. Ensures field usage.
• Develop new procedures and Best Known Methods.
• First chamber Build . Work with Engineering and Manufacturing; participate on New Product final test.
• Develop technical materials.
• Observe technical activities to determine operating procedure and detail.
• Interview personnel to become familiar with products & methods.
• Study tech docs to integrate a technology, operating procedure, production sequence and detail.
• Review published materials and recommends revisions.
• Communicates with BUs to obtain current product information for courses updates; represents technical training organization at divisional meetings.

Functional Knowledge

• Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities

Business Expertise

• Understands key business drivers; uses this understanding to accomplish own work

Leadership

• No supervisory responsibilities but provides informal guidance to new team members

Problem Solving

• Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents

Impact

• Impacts quality of own work and the work of others on the team; works within guidelines and policies

Interpersonal Skills

• Explains complex information to others in straightforward situations

Additional Job Description

- Support 2nd shift training when needed

- Work on 2 location when needed (Changi North Crescent or Tampines Park)

Job Summary:

1) Before testing the lots, operator request technician / Sr. Operator (Test) to countercheck the diagnostic to run the program.

2) Brings the Pass chip trays to the work bench for quantity check on each tray.

3) Collect the finished products separate the good chips and reject chips.

4) Complete the Error Code Collection Form at Low Yield.

5) Complete the Outgoing Inspection Checklist.

6) Count the materials QTY.

7) Double check inputted information.

8) Enter information on the corresponding fields using barcode scanner.

9) Inspect the outgoing materials for production.

10) Label the Reject/VISL chips and write down the number of bad chips.

11) Materials pack out. (Materials Strap, vacuum seal and stick a product label)

12) Materials Strap, vacuum seal and stick a product label when necessary.

13) Prepare and fill in the traveller.

14) Prepare and print out label.

15) Prepare the chips for OOBA.

16) Put tray and material on Handler.

17) Test operator clips a GREEN clip on each tray of passed chips and a RED clip on each tray of reject chips.

18) Verify the traveller information with the materials.

Job Requirements:

- 8 hours shift work (rotating day/night shift)

- Willing to work in cleanroom environment

- Basic English language skills (Able to read and write)

- Has manufacturing/fab experience

- 1 to 2 years of related working experience in the semiconductor industry is preferred.

At SASS (Singapore Aero Support Services Pte Ltd), we are looking for a highly motivated individual with strong expertise in data reporting and analysis to join our expanding team.

Working alongside the HR team, you will be responsible for all HR related reports, presentations and other HR project duties.

If you are a team player who is flexible, willing to take up challenges, perform under pressure and understands the complexities within the aviation sector, we look forward to receiving your application.

Job Responsibilities:

• Obtain, transform, and validate HR data to ensure accuracy, consistency, and data integrity.
• Compile HR data and metrics from the human resource information system (HRIS) and payroll outputs.
• Collect and analyse HR data from various sources, including HRIS, employee surveys, performance evaluations, and other relevant systems.
• Gather and disburse government labor statistics, new employment regulations, and labor laws
• Prepare reports of data results and present findings to SHRM.
• Execute tasks in HRIS (Timesoft) and oversee HR data integrity.
• P-File Management; ensure full digitalization of HR documents.
• Contribute to system decision-making, scoping, and arranging HR system projects in support of the overall HR strategy.
• Other HR projects and tasks assigned

Job Requirements:

• Diploma in related field with min. 2 years of working experience in a similar capacity
• Strong excel and reporting skills
• Prior experience in Timesoft is advantageous
• Positive working attitude, a team player, ability to meet tight timelines and perform under pressure.

Responsibilities:

• Assist in checking of aircraft components and consumables availability
• Update on spares ordered and trigger for collection and delivery to the required locations
• Coordinate and ensure timely collection and delivery and prioritize based on level of criticality
• Generate reports on all orders, collection and delivery status
• Assist a team of planners in Line Maintenance Component Control
• Carry out any other tasks as per assigned by Supervisor or Executive

Requirements:

• GCE “O” Level, ITE or Diploma in Engineering or its equivalent
• Minimum 1-2 years of working experience in store, purchasing or warehouse
• Experience in inventory management
• Preferably familiar with SAP
• Possess good communication skills
• Able to be a good team player

At SASS (Singapore Aero Support Services Pte Ltd), we are looking for a highly motivated individual with strong expertise in data reporting and analysis to join our expanding team.

Working alongside the HR team, you will be responsible for all HR related reports, presentations and other HR project duties.

If you are a team player who is flexible, willing to take up challenges, perform under pressure and understands the complexities within the aviation sector, we look forward to receiving your application.

Job Responsibilities:

• Obtain, transform, and validate HR data to ensure accuracy, consistency, and data integrity.
• Compile HR data and metrics from the human resource information system (HRIS) and payroll outputs.
• Collect and analyse HR data from various sources, including HRIS, employee surveys, performance evaluations, and other relevant systems.
• Gather and disburse government labor statistics, new employment regulations, and labor laws
• Prepare reports of data results and present findings to SHRM.
• Execute tasks in HRIS (Timesoft) and oversee HR data integrity.
• P-File Management; ensure full digitalization of HR documents.
• Contribute to system decision-making, scoping, and arranging HR system projects in support of the overall HR strategy.
• Other HR projects and tasks assigned

Job Requirements:

• Diploma in related field with min. 1 year of working experience in a similar capacity
• Strong excel and reporting skills
• Prior experience in Timesoft is advantageous
• Positive working attitude, a team player, ability to meet tight timelines and perform under pressure.

We are seeking a motivated and detail-oriented individual to join our team as a Dormitory Supervisor cum Store man. The ideal candidate will be responsible for overseeing inventory management, warehouse operations, stock control, team management, and communication within the dormitory facility.

Key Responsibilities:

• Enforce dormitory rules
• Arrange and allocates rooms for the internal and sub-contractors' workers
• Prepare and maintain all the check in and check out record in the system
• Liaise with HQ and Site for dormitory related matters.
• Attend to company request and handle workers’ problems
• To conduct random room inspections to check on general upkeep and also to verify that only authorized persons reside in the units
• Perform joint inspection for taking over of non-renewal units and handing over of new tenancy units
• Responsible for the all the administration related matters in dormitory
• Maintain accurate inventory records e.g. in and out reporting and perform regular stock checks.
• Organize storage areas to ensure accessibility and neatness.

Requirements:

• Min 1 year experience in dormitory management
• Good interpersonal, communication and leadership skills.
• Alert and possess good observational skills.
• Experience in the Security Industry will be an advantage.
• Seniors and Retirees are welcome to apply.

Who we are

Do you want to join our Geo-data revolution? Fugro’s global reach and unique know-how will put the world at your fingertips. Our love of exploration and technical expertise help us to provide our clients with invaluable insights. We source and make sense of the most relevant Geo-data for their needs, so they can design, build and operate their assets more safely, sustainably and efficiently. But we’re always looking for new talent to take the next step with us. For bright minds who enjoy meaningful work and want to push our pioneering spirit further. For individuals who can take the initiative, but work well within a team.

Summary

Ready to play a central role in support of projects and operations colleagues world wide? Step into the position of Business Support Specialist – Projects, where you will deliver crucial functional support to our Projects and Operations staff. Enable end-users with your specialized guidance in maximizing the effectiveness of the new and exciting IFS ERP system for their roles. Apply now and be a crucial part of our path to project excellence!

Your role

• You provide functional support and training within the domain of Project and Operations Management in Fugro’s IFS ERP system. This entails responding to user incidents and questions, trouble shooting issues and providing timely resolutions and answers;
• You assist users in navigating the software, diagnosing and resolving functional issues and answering questions that could not be answered in Level 1 support;
• You accurately document user interactions, reported problems and resolutions in a ticketing system or knowledge base;
• You liaise with developers, system administrators and BPE’s to escalate complex issues, coordinate bug fixes and communicate updates to end users;
• You continuously identify opportunities to enhance the user support process and develop self-service resources such as FAQ’s, user guides and video tutorials to empower users to solve basic issues independently;
• You keep updated with the latest software updates to ensure optimal support delivery and suggest improvements;
• You assist in identifying main risks and propose mitigations in the ERP system where possible.

Your track record

• You have at least a Higher Diploma/Degree in Business Administration
• As a plus, you have certifications such as ITIL or HDI Support Center Analyst;
• You have at least 3 years of experience in Project (financial) administration or Application Functional support;
• Experience with Project Management or Operational Management related field;
• You preferably have a background within an international project-oriented environment;
• You are service minded and have great communication and stakeholder management skills;
• You have excellent English language skills, both written and oral.

What Fugro offers

• Competitive salary with Annual Wage Supplement
• Generous paid-leave
• Career & training opportunities (international opportunities possible)
• Company shuttle from various pick-up at MRT stations across Singapore
• Collective health insurance and outpatient benefits;
• Employee Assistance Programme (EAP) to provide help when you need extra support.
• Additional benefits: Long Service Awards, Professional Membership, Weekly fitness-related activities, etc)

**Benefits may vary according to position/contract/grade level.

Our view on diversity, equity and inclusion

At Fugro, our people are our superpower. Their variety of viewpoints, experiences, knowledge and talents give us collective strength. Distinctive beliefs and diverse backgrounds are therefore welcome, but discrimination, harassment, inappropriate behaviour and unfair treatment are not. Everybody is to be well-supported and treated fairly. And everyone must be valued and have their voice heard. Crucially, we believe that getting this right brings a sense of belonging, of safety and acceptance, that makes us feel more connected to Fugro’s purpose ‘together create a safe and liveable world’ – and to each other.

How to apply

• Please include your latest resume in the application.
• Please describe your working rights in Singapore (work pass sponsorship is subject to quota and availability).
• We regret to inform that we will only process applications made via our Careers website (and other linked portals) and only shortlisted applicants will be contacted.

The successful candidate will be providing digital customer solutions serve as the first line support to assigned customers/sales.

• Oversee good commercial relationship with all customers
• Monitor programs and procedures to ensure on-time delivery and customer satisfaction with the team
• Manage and implement the process improvement and changes enabled by IT systems
• Provide in-house support to the Sales Personnel in handling sales quotations, SOPs, RFQs and enquiries pertaining to assigned accounts
• Liaise and coordinate with global offices/agents with regards to sales-related enquiries, as well as shipment monitoring/coordination in accordance to account SOP set up
• Generate weekly/monthly reports for internal and external customers, in accordance to their requested format
• Review, update and maintain SOP, quotations and RFQ results for assigned accounts in server/systems
• Follow up on customer issues or handle disputes as and when necessary
• Develop and direct procedures pertinent to the effective and efficient operation of the Sales Support Team
• Provide feedback to the Operations team to ensure all customers have accurate and timely information on order status and/or changes
• Ensure company policies & procedures, confidentiality, legal and ethical guidelines, such as Delegation of Authority are clearly communicated and adhered to
• Coach and guide new hires and junior team members for development and alignment

Qualifications and Experience

• Post Secondary/Diploma in Marketing, Logistics, Supply Chain Management or equivalent
• 5 to 8 years of relevant experience in Freight Forwarding Industry
• Good knowledge of Cargowise One is advantageous
• Strong service orientation and customer management skills
• Good knowledge of Ocean Freight Quotation
• Strong interpersonal skills and teamwork

1) Sales Support Executive (Air & Sea Freight)

Job Duties

• Handling full operations on Air or Ocean freight import/export shipments
• Work closely with customers and agents for air freight or sea freight operations
• Coordinate with customer service team and sales team in providing the contractor’s cost for trucking/shipping liners/airliners etc.
• Assist in the preparation of Pricing & Quotations
• Assist sales team with operations and quotations and complete documentations including billing invoice
• Complete documentations and operations on Air & Ocean freight. Such as permit application, shipment data, billing and other operations

Job Requirements

• Min GCE “O” Level or Diploma in Logistic / Supply Chain relevant discipline is preferred.
• Minimum 3 to 5 years of relevant experience in freight forwarding
• With permit declaration through Tradenet is preferable
• Computer literacy eg: proficient in MS Word & Excel etc

Job Description:

· Promote sales of semiconductor equipment, parts, materials and services to achieve sales targets

· Work with customers and principals in sales activities like presentation, quotation, specification

confirmation, negotiations, commissioning/acceptance and post sales services

· Build and maintain good rapport with principals and vendors

· Foster strong relationships with customers, understanding their requirements and provide solutions for

long-term success

· Conduct evaluations for system, parts and materials with customers

· Execute plans to increase market share for assigned products and services

· Collaborate with suppliers, principals and internal staff to achieve smooth and prompt sales and technical

service support

· Prepare sales reports for internal and external use

· Work diligently with customers and suppliers on consumption pattern and forecast planning to prevent

missed sales and excess inventory

· Input comprehensive HOMS record from all customer engagements in a timely manner

· Complete all required sales reports, records and ISO documentation timely

· Response to customer queries swiftly and timely

· Identify opportunities for upselling and cross-selling additional products or services

Requirements:

• Min. diploma in Engineering qualification
• Proficient in Microsoft office
• Sales driven, creative, dynamic, and independent.
• Good communication in oral/written skills in both English and Chinese needed
• Equipped with 3rd language (Japanese/Korean language) will be added advantage
• Able to multi-task, highly organized, detail oriented, good team player
• Able to response/work on off office hours and overseas travel