Contract Period: From April 2025 for 24 months

Working hours:

Total 44 hours/week

· Mondays to Fridays: 8.30 am to 5.30pm

· Saturdays: 8.30 am to 12.30pm

· Lunch break 1 hour (Mon to Fri), time to be 12.30pm to 1.30pm.

The RTO may be required to work beyond regular working hours including after office hours on Saturday, Sunday and Public Holiday whenever the need arises, and services rendered shall be based on the actual number of man-hours spent on site.

Scope of works:

· Communicate effectively with PUB officers, resident engineer, contractors, and other stakeholders to ensure that project specifications are met.

· Maintain and document accurate records (hardcopy and softcopy) of daily activities, site conditions, and any issues encountered, ensuring these are communicated promptly to project managers and engineers.

· Daily oversight of demolition and reinstatement activities, ensuring they are carried out according to engineering designs and safety standards.

· Ensure that all construction materials and workmanship meet the required standards.

· Implement and monitor safety protocols to protect workers and the public from the dangers inherent in demolition work.

· Working closely with contractors to ensure that the project stays on schedule and within budget, and that all work is performed according to the contract specifications.

· Ensuring that demolition and construction activities comply with environmental regulations, including dust control, noise abatement, and waste disposal.

· Arrange and supervise acceptance tests on the site as may be necessary, including the approval of samples submitted, inspection and testing during manufacture of such materials, equipment and plants as are usually inspected and tested locally before commissioning.

· Assist in supervision and maintain quality control as specified in the Contract signed between the Board and the Contractor who have been awarded the project: “Demolition and Land Reinstatement Works at Bedok NEWater Factory.”

· Monitor and report on the progress of the work as per approved by the Board.

· Record and ensure that all works are carried out in accordance with the contract specifications and report any non-compliance to the Board.

· Obtain all quotation documents needed for any Variation Order (VO) Work which might arise during the course of the project.

· Check on the quality of materials delivered to site and report to the Board any material that does not conform to the specifications.

· Check and certify the monthly progress claim submitted. Assist the Board to verify all variation works carried out on site. Record and report all additional work and any claim on extension of time.

· Inspect all completed works and compile a list of rectification works.

· Monitor the progress of rectification work and ensure all rectification works are satisfactorily completed.

· Ensure the safety, cleanliness, tidiness and Earth Control Measure (ECM) are provided and maintained on site.

· The RTOs shall review the Risk Assessments & Methods Statements and verify Permit-to-work (PTW) and Notification-to-Work (NTW) submitted, before the commencement of any work.

· Ensure that all temporary works are constructed according to the Professional Engineer’s or approved drawings.

· Ensure all demolition, reinstatement, grouting, excavation, pipe welding, pipe laying, backfilling, etc. are checked certified and supervised.

· Facilitate the consultation and co-ordination with all authorities and agencies in order to obtain approval on time.

· Assist the Board on the finalisation of all accounts upon partial completion and/or completion of work.

· All other duties as and when required by the Board.

Qualification, skill, experience:

· Minimum Diploma in Civil or Geotechnical Engineering from a recognized institution or equivalent is necessary.

· About 3 years of experience in site supervision, particularly in Civil or geotechnical projects with experience in demolition, construction, or similar industrial projects.

· Practical experience in projects that involve construction, demolition, structural integrity assessments, and reinstatement of structures is crucial.

· Hands-on experience in ensuring that safety protocols are rigorously followed on-site.

· Should have valid certificate from The Association of Consulting Engineers Singapore (ACES) or The Institution of Engineers Singapore (IES).

· Should be equipped with Building Construction Supervisor Safety Certification or equivalent as well as certification on both work at height and confined space entry.

· Proficiency in reading and interpreting Civil engineering drawings, and familiarity with construction materials, techniques, and regulations. Understanding of soil mechanics,
ground behaviour, and foundation engineering, particularly in the context of demolition and reconstruction.

· Familiarity with tools and equipment used for site inspections, such as levelling instruments, soil testing equipment, and structural assessment tools.

Responsibilities:

Shipbuilding Planning and Preparation

• Confirmation of construction schedule, detailed drawings, and specifications. Participation in regular meetings with shipowners, shipyards, designers, and other relevant parties.

Shipbuilding Quality control

• Verify that materials and parts used conform to specifications. Checking the progress and quality of each construction process to ensure proper quality. Perform inspections, Nondestructive testing (NDT), welding inspections, painting inspections, etc. Observe and confirm various tests (buoyancy tests, pressure tests, functional tests, etc.).

Shipbuilding Design supervision

• Check and approve blueprints and change drawings. Handling of review and approval of design changes that occur during construction.

Shipbuilding Safety management

• Planning HSSE management. Patrols and Ensures compliance with safety standards within the shipyard.
• Reporting and handling of safety issues and incidents.

Shipbuilding Process control

• Monitoring the progress of construction according to the schedule. Responding to and coordinating schedule changes and delays.

Shipbuilding Reporting and Recording

• Reports to head office about progress, problems, budget etc. Preservation of important records such as inspection results and test results.

Communication and coordination

• Liaison and coordination with shipyards, designers, shipowners, standards bodies, etc.
• Prompt response and resolution of problems and issues that arise.

Compliance with laws, regulations and standards

• Verification of compliance with the International Maritime Organization (IMO), Classification Society (Class), Japanese law and regulations and other standards and laws. Management of inspections and witnessing by standards bodies.

Shipbuilding Final verification and handover

• Completion inspection and verification during the final process. Confirmation of final trials such as sea trials. Witnessing and confirmation of the final handover of the vessel.

Preparation for cable laying work after delivery

• Order and load the materials and equipment needed for the cable laying work. Planning the suitable crew rotation schedule and the operation schedule. Cable installation project planning support.

Defect warranty

• When a machine problem occurs, troubleshoot to identify the cause and resolve it after delivery.
• Negotiate compensation with the shipyard in the event of a problem occurring and maintain the ship in a sound condition.

Cable laying Project Operation and Vessel Maintenance

• Quickly identify the cause of mechanical or electrical troubles in the working vessels andestablish a proper restore/repair plan. Take precautions to prevent troubles on working vessels. Handle operational issues, repairs, and/or modifications to Cable laying Vessel fleet.
• Liaise and coordinate with various stakeholders, Vessel master’s shipyard and vendors to schedule repairs and maintenance needed for the operations.
• Prepare proposals for docking requirements and specifications. Check and ensure that spare parts inventory management and condition are sufficient to support repair and maintenance schedules.
• Ensure quality, environment, health & safety requirements are met.

Requirements:

• Minimum 4 years of higher education in mechanical and/or naval engineering.
• Minimum 2 years of experience with ship hull design and outfitting design in shipyards.
• Experience in building six or more new ships at a shipyard.
• Experience in large civil construction project sites over SGD120M in General Civil works
• Experience in large marine construction project sites over SGD100M in Marine construction works
• Well-versed in ship maintenance requirements.
• Good knowledge of ship engineering, structural mechanics, marine engineering, and marine equipment
• Positive working attitude and ability to work in a fast-paced environment.
• Positive troubleshooting/finding root causes with shipyard engineers and workers
• during the project period.

Responsibilities:

• Keep abreast of progress and provide instructions to ensure work is carried out as planned.
• Able to manage budgets and procure and manage materials and equipment appropriately.
• To formulate plans, check progress and control quality.
• To check Ship design drawings and technical specifications
• Confirm compliance with IMO, classification society (ClassNK) and inspections stipulated by the Japanese government (JG) and comply with technical standards.
• Able to prepare progress reports and reports to head office.
• Maintain appropriate technical drawings, specifications, and reports.
• Identifying and resolving problems occurring in the field and proposing improvements to increase efficiency and quality.
• Facilitate coordination with relevant parties (shipyards, classification societies, manufacturers, etc.) to ensure smooth operations.
• Manage work teams, liaise with other departments, and coordinate effectively with clients.
• Communicate and cooperate with shipyard personnel and ship's crew, and able to identify root causes and suggest appropriate countermeasures in resolving problems.

Requirements:

• Minimum 12 years of ship maintenance management experience with a degree in Mechanical Engineering or a recognised degree in the relevant field subject to the acceptance of the engineer.
• Proven track record in the ship of maintenance management

⮚ Jack-up Vessel

⮚ Cutter Suction Dredger

⮚ Trailing Suction Hopper Dredger

⮚ Anchor Handling Vessel

• Experience in large size of dredging & reclamation project sites over SGD 500M
• Experience in design, calculation, planning and modification of ships and ships equipment.

⮚ Jack-up Vessel

⮚ Cutter Suction Dredger

⮚ Trailing Suction Hopper Dredger

⮚ Anchor Handling Vessel

• Good knowledge of marine engineering and structural mechanics
• Experience in planning large-size crane equipment.
• Good knowledge of the ClassNK survey
• Well-versed in ship maintenance requirements
• Good written and interpersonal skills
• Positive working attitude and ability to work in a fast-paced environment.
• Positive troubleshooting / finding the root cause.

Responsibilities:

• Supervise that the ship is built according to specifications and approved plans
• Supervise that the ship is built for compliance with relevant IMO regulations, Rules and Regulations for the Classification and Regulations flag country
• Review technical and building specifications and plans for shipbuilding
• Quickly identify the cause of troubles that occurred during shipbuilding and establish proper solutions
• Take precautions to prevent troubles during shipbuilding
• Liaise and coordinate with various stakeholders, shipyard, designer, vendors, Classification society, and flag country for technical and procedural issues during shipbuilding
• Ensure quality, environment, health & safety requirements are met

Requirements:

• Master's degree in Naval Architecture and Ocean Engineering
• Minimum fifteen(15) years of experience in either of four(4) major IACS Classification Society, ABS, Class NK, DNV or LR
• Proficiency in plan approval for hull structure in new construction projects of merchant ships the length of which is more than 200 metres (more than ten(10) different designs)
• Experience in plan approval for Zero-emission related works, such as; Carbon Capture and Storage system and Alternative fuel
• Experience in design review for novel design of hull structures, such as; Unusual hull form, proportion and structural arrangement
• Experience in structural strength assessment for sloshing in large tanks, such as; Cargo tanks (GTT MK III membrane system) of LNG tanker
• Experience in management as a member of the leadership team of the Classification Society in any country.
• Good knowledge of Rules and Regulations for Classification of Ship, IMO International conventions and codes etc. with experience in the development and maintenance of the Rules
• Good knowledge of innovative technology in the marine industry, such as; Wind-Assisted Propulsion System
• Positive working attitude and ability to work in a fast-paced environment
• Positive troubleshooting/finding root cause during shipbuilding

Responsibilities:

• Confirm compliance with IMO, classification society (ClassNK) and inspections stipulated by the Japanese government (JG) and comply with technical standards.
• Manage budgets and procure and manage materials and equipment appropriately.
• Safe work planning by setting workplace safety rules and engaging in safety training.
• Thorough control and rapid response in spare parts stock management, repairs, and maintenance.
• To formulate plans, check progress and control quality accurately.
• Facilitate coordination with relevant parties (shipyards, classification society, manufacturers, etc.) to ensure smooth operations. Identifying and resolving problems in the field and proposing improvements to increase efficiency and quality.
• Prepare progress reports and report them to head office.

Requirements:

• Minimum 4 years of experience operating and maintaining working vessels in the owner's capacity.
• Degree in Electrical and or Electronic Engineering
• Experience in working at civil construction sites such as Jetty construction, Dredging, Ground improvement
• Experience in dredging and planning electrical equipment.
• Experience in Dredger salvage operation.
• Experience in dredging works using Grab dredgers.Good knowledge of Electrical circuit diagrams such as Electrical wiring for the assembly-type dredger.
• Good knowledge of Programmable Logic Controllers and programming such as PLC ladder, function block etc.
• Sufficient skills and experience are required in ship-related operations, as well as operational efficiency and troubleshooting skills.
• Well-versed in ship maintenance requirements.
• Positive working attitude and ability to work in a fast-paced environment.
• Positive troubleshooting/finding root cause with the ship's crew on board.
• Positive personality, always willing to communicate and cooperate with shipyard personnel and ship's crew, and able to identify root causes and suggest appropriate countermeasures in resolving problems.

Domain: Banking (Must) / Location: North, Singapore

1. The contact point for users and work with Functional BA to identify the root cause and provide solutions.

2. To perform analysis of production defects / findings to identify root cause.

3. To identify and propose workarounds and solutions for production issues.

4. To analyse the requirements and identify the technical solutions for Avaloq functional changes.

5. To prepare the FSD and TSD, where applicable.

6. To walk through the solutions with users to confirm that they are as per the requirements.

7. To perform parameterization, unit testing and SIT, where applicable.

8. To understand the various batch jobs, purposes and the underlying functionalities.

9. To provide Avaloq technical solutions for issues relating to performance of the system.

10. To perform audit of codes delivered by the other team members or vendor resources.

11. In-charge of support of the newly delivered Avaloq Web Banking and developments required by business consumption for Avaloq Web Banking (CAPI/AMI/Micro services).

Mon - Fri 830am - 6pm

Location: Havelock

BASIC + AWS + PERFORMANCE BONUS + TRANSPORT + HP ALLOWANCE

Responsibilities

• Oversea the whole process of service cum maintenance workflow
• Frontline contact with client representatives on all service/maintenance related issues
• Lead a team of service team members
• Prepare service scope and develop service plans, define resource loading, skill requirements, tracking milestones and metrics
• Determine new, creative ways to employ teams on service deliveries and distribute responsibilities
• Manage day-to-day client interactions and expectations for optimal results
• Continually seek and capitalise upon opportunities to increase customer satisfaction and deepen client relationships
• Possess a knowledge base of each client's business, organisation and objectives
• Be responsible for operationally managing multiple aspects of the team
• Ensure smooth progress and timely delivery and completion of maintenace commitments to clients
• Perform a wide variety of technical and non-technical tasks

Requirements

• Hands-on experience in security systems such as integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems and CCTV Systems is a must
• Hands-on experience in security system configuration, application programming and integration with third-party systems will be an advantage
• Technology savvy (hardware & software)
• Excellent problem solving skills
• Strong verbal and written communication skills
• Must be a team player
• Customer service and business orientated with good initiative and adaptability

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform that only shortlisted candidates would be notified

We wish you all the best in your career search.

You are welcome to visit our website at www.rdtpsg.com

RD Trusted Partners Pte Ltd| EA License No.: 24C2352

Chee Wei Qian (Sandy) | EA Personnel No.: R24125920

Job scope and responsibilities

1. To carry out structural and civil works inspection progressively and proactively

2. Able to spot safety infringement or near misses on site and report to safety team on time

3. Experienced in structural steel inspection

4. Must be able to read and interpret structural plans and details

5. Willing to work night shift

6. A team player and possess good technical knowledges in structural concrrete and post-tensioning works

7. Able to draft simple daily reports, progress report and inspection reports.

Requirements:

• Registered RTO with valid certificate issued by BCA/ JAC (IES-ACES)
• Degree/diploma with specialization in a relevant technical field.
• At least 5 years of working experience on site

• Deploy, configure and integrate IT components and related border-control endpoints, including Hardware and Software.
• Part of integration team on site to troubleshoot, analyse and resolve issues through log analysis and hardware diagnostics.
• Perform integration testing on lab test benches & on-site.
• Communicate and interface with vendors and customers.
• Generate reports and write documentation, e.g. business data reports, operation manual, test procedures and test reports.
• May be required to perform integration and deployment tasks during maintenance hours (i.e. late night till early morning) if it involves changes to operational systems.
• Other duties as assigned.
• Ability to work in a fast paced & dynamic environment, handling complex deployment and integration tasks with professionalism.
• Conscious about service quality, with an appropriate sense of urgency in fulfilling customer requirements.
• Possess strong troubleshooting skills and techniquesAbility to manage assigned integration and deployment activities independently.
• Ensure completion of integration & deployment tasks within agreed timelines.
• Knowledge and experience in 2 or more of these skillsets: -
• Enterprise scale Linux and Windows administration with strong troubleshooting skillset
• VMware ESXi and vCenter administration with strong troubleshooting skillset (Preferable with CLI knowledge) (7.0 and above)
• Kubernetes K8s
• TCP/IP Networking, Network/Security devices (e.g. Cisco Switch, Firewall, Fortinet)
• MSSQL, Oracle, and other database servers
• Monitoring systems (e.g. Centreon, Nagvis)
• Familiarity with the following will be advantageous: -
• Management of SAN storage, NetApp storage and tape library
• Administration/Management of security tools, e.g. Antivirus, EDR, Windows Key Store, etc.
• Windows PowerShell, Unix Scripting

Job Description

We are passionate about the fintech way of working and approaching things differently to how big banks typically operate. We’re currently looking for ambitious and motivated individuals who are keen to embrace growth and tackle the impending challenges in this fast-evolving industry, joining us on our journey. To cope with our expansion, we are now seeking a high caliber professional and self-motivated Technical Lead - Android to join our technology team.

Principal responsibilities

• Develop mobile applications (Android) to for payments and FX product and services.
• Work together with Product Owners, Business Analysts, Solution Architects, Cyber Security and other stakeholders to delivery world-class mobile applications with outstanding customer experience.
• Help in system technical design, CI/CD and automated testing activities.
• Work in Agile teams, participated in or lead Sprint Show & Tell.
• Prepare necessary documents for technical specification and knowledge management.
• Investigate and resolve technical issues in testing and production.

Qualifications/Requirements

• Bachelor's Degree in Computer Science.
• 7+ years of experience.
• Good technical design and problem solving skills, and good communication skills, being able to take ownership and responsibility to work as individual contributor.
• Proficient in programming languages, frameworks and architecture including Kotlin, Swift, Node.JS, MVVM.
• Familiar with RESTful APIs concept and integration.
• Familiar with Cloud technologies.
• Familiar with DevOps, Security and automation tool stacks including Github, Jenkins, Ansible, Checkmarx, SonarQube, Postman, Appium, Selenium.
• Proficient in applying Agile development methodology in project development lifecycle and day-to-day work in scrum team.
• Fast learner in integrating third-party services to core platform including data warehousing services and other business fulfillment services.
• Being able to work under pressure and flexible hours in global team.

About Us:
From business process re-engineering to global business expansion for Japanese corporations, Abeam Consulting has served our clients through more than 40 years of growth. With our vision of being the No. 1 global consulting firm from Asia, ABeam Consulting helps our clients take on the challenge of business transformation. With 4,400 consultants in Japan, and 3,100 in overseas offices concentrated in Asia, our 7,500 consultants and global alliance partners provide truly comprehensive services.

Job Summary:
The SAP Technical Pillar Lead will take ownership of leading the design, development, and delivery of SAP technical solutions, including technical architecture, integration, extensions, and infrastructure. Managing a team of members, consisting of both permanent employees and subcontractors, the role involves mentoring the team, setting quality standards, reviewing deliverables, and ensuring technical excellence. The SAP Technical Pillar Lead will also play a pivotal role in presales activities, leading technical proposals and client engagements.

Responsibilities:

1. Leadership & Team Management: Manage and mentor a team of SAP technical consultants, including both permanent employees and subcontractors.
   Establish and enforce quality standards for deliverables to ensure alignment with best practices.
   Conduct regular work reviews to maintain high technical quality and compliance with project requirements.
   Encourage knowledge-sharing within the team and support continuous professional development through training and mentoring.
   
2. Technical Architecture & SAP Basis Management: Lead the design and delivery of end-to-end technical architectures, covering SAP BTP, CPI, SAP Fiori/UI5, APIs, and OData services.
   Oversee SAP Basis administration, including system setup, configuration, upgrades, performance tuning, and patch management.
   Manage SAP landscape management, including backups, system monitoring, transport management, and security compliance.
   Ensure seamless integration with SAP modules such as SAP SuccessFactors, S/4HANA, Employee Central Payroll (ECP) and IAS/IPS, as well as with external systems.
   
3. Project Delivery & Quality Control: Oversee the successful delivery of technical projects across SAP platforms, ensuring adherence to timelines and quality standards.
   Lead data migration and transformation efforts during new implementations and upgrades.
   Provide technical leadership to troubleshoot and optimize system performance, ensuring stability and availability.
   
4. Governance & Compliance: Define governance frameworks to ensure consistent, compliant technical delivery across all projects.
   Implement monitoring systems to ensure the health, performance, and security of SAP infrastructure.
   
5. Presales & Business Development: Lead presales activities, including technical solutioning, proposal creation, and client presentations.
   Collaborate with sales and business development teams to support bids and identify new business opportunities.
   Engage with clients as a trusted advisor, providing strategic guidance on technical solutions and innovation.
   
6. Vendor & Stakeholder Management: Manage relationships with SAP vendors, partners, and subcontractors to ensure timely delivery and cost efficiency.
   Act as the primary technical point of contact for key client discussions and strategic engagements.

Requirements:

• 15+ years of experience in SAP technologies, with expertise in technical consulting, development, and integration.
• Proven experience leading and mentoring large technical teams (50+ members), including permanent staff and subcontractors.
• Good Understanding with SAP BTP, CPI, Fiori/UI5, ABAP, and OData services.
• Integration experience across SAP SuccessFactors, S/4HANA, Employee Central Payroll (ECP), SAP IAS/IPS and external systems.
• Demonstrated ability in project delivery with a focus on quality control and technical governance.
• Experience with presales and client solutioning, including technical proposals and presentations.
• Knowledge of cloud environments (e.g., Azure, AWS, GCP) and performance optimization techniques.
• Excellent stakeholder management and communication skills.

Educational Qualifications:

• Bachelor's degree in Computer Science, Information Systems, or a related field (Master’s preferred).
• SAP Certifications in relevant areas such as SAP Basis, BTP, CPI, or ABAP are highly desirable.

Why Join Us
At ABeam Consulting, we place a strong emphasis on collaboration, and helping our employees grow and develop their skills, offering a supportive and empowering work environment. With a presence in multiple countries and a diverse range of clients, Abeam Consulting offers an exciting and dynamic workplace for individuals looking to build a career in consulting. Abeam Consulting has also recently joined SAP’s regional strategic partner initiative as their first regional partner in the region and has also been recognized by UiPath as a Diamond Partner in providing RPA solutions. With such accolades, we aim to continue driving enterprise and digital transformation initiatives in order to transform the way people work and communicate in the digital age. In addition, our industry team is working tirelessly in order to bring more solutions to the banking and finance sector.

We regret only shortlisted candidates will be notified.

Job Description

• Lead, plan and manage projects involving multiple systems.
• Communicating with internal/external stakeholders including offshore development team.
• For any change request is raised, understand the customer’s expectation, discuss with the customer and development team to fix the requirement and specification.
• Provide the support for the customer in any incidents/clarification on the systems.
• Expected to perform Hands-on activity (Investigation, Fixing, Testing, Module release).
• Communicate with the offshore development team to discuss and understand detailed implementation.
• Ensure all technical specifications are recorded & updated timely.

Job Requirements:

• Degree in Information Technology.
• Min 5 years and above in IT banking services.
• Experienced in Avaloq Technologies with core banking expertise.
• Excellent stakeholder management and communication skills.
• Strong analytical and strategic thinking, as well as the ability to grasp and document abstract and complex matters.
• Strong result orientation and stress resistance.
• Teamwork and ability to share knowledge with the team.
• Strong verbal and written communication skills.

Please send your detailed resume in MS Word format including the following details to: [email protected]

1. Working experience

2. Reason for leaving each employment

3. Last drawn salary

4. Expected salary

5. Date of availability

Roles and Responsibilities

• To carry out all preventive and breakdown maintenance for all Aircon equipment.
• Ensure safe keeping of hand tools and maintain good housekeeping.
• Ensure all works are carried out safely and/or in accordance with safety procedures.
• Provide technical advice and assistance on all maintenance functions.
• Any other tasks, when required by the immediate superior.
• Prepare service reports after every completed job for customer’s endorsement.
• Communicate with clients with regards to problems in equipment and post-job reports.
• Any ad-hoc tasks given by supervisor or management.

Requirements

• Nitec in Mechanical / Electrical / Electronic or related field
• Candidates with at least 2 years of related technical experience in chillers, ACMV equipment, switchboard, and generators will be an advantage
• Candidates with no experience are welcome to apply (on Job Training)
• Positive attitude, good interpersonal and customer-centric skills
• 5.5 working days, Mon to Fri 8am to 5pm, Sat 8pm to 12pm
• Only Singaporeans may apply

Responsibilities:

Shipbuilding Planning and Preparation

• Confirmation of construction schedule, detailed drawings, and specifications. Participation in regular meetings with shipowners, shipyards, designers, and other relevant parties.

Shipbuilding Quality control

• Verify that materials and parts used conform to specifications. Checking the progress and quality of each construction process to ensure proper quality. Perform inspections, Nondestructive testing (NDT), welding inspections, painting inspections, etc. Observe and confirm various tests (buoyancy tests, pressure tests, functional tests, etc.).

Shipbuilding Design supervision

• Check and approve blueprints and change drawings. Handling of review and approval of design changes that occur during construction.

Shipbuilding Safety management

• Planning HSSE management. Patrols and Ensures compliance with safety standards within the shipyard. Reporting and handling of safety issues and incidents.

Shipbuilding Process control

• Monitoring the progress of construction according to the schedule. Responding to and coordinating schedule changes and delays.

Shipbuilding Reporting and Recording

• Reports to head office about progress, problems, budget etc. Preservation of important records such as inspection results and test results.

Communication and coordination

• Liaison and coordination with shipyards, designers, shipowners, standards bodies, etc.
• Prompt response and resolution of problems and issues that arise.

Compliance with laws, regulations and standards

• Verification of compliance with the International Maritime Organization (IMO), Classification Society (Class), Japanese law and regulations and other standards and laws. Management of inspections and witnessing by standards bodies.

Shipbuilding Final verification and handover

• Completion inspection and verification during the final process. Confirmation of final trials such as sea trials.
• Witnessing and confirmation of the final handover of the vessel.

Preparation for cable laying work after delivery

• Order and load the materials and equipment needed for the cable laying work. Planning the suitable crew rotation schedule and the operation schedule. Cable installation project planning support.

Defect warranty

• When a machine problem occurs, troubleshoot to identify the cause and resolve it after delivery.
• Negotiate compensation with the shipyard in the event of a problem occurring and maintain the ship in a sound condition.

Cable laying Project Operation and Vessel Maintenance

• Quickly identify the cause of mechanical or electrical troubles in the working vessels and establish a proper restore/repair plan. Take precautions to prevent troubles on working vessels. Handle operational issues, repairs, and/or modifications to Cable laying Vessel fleet.
• Liaise and coordinate with various stakeholders, Vessel master’s shipyard and vendors to schedule repairs and maintenance needed for the operations. Prepare proposals for docking requirements and specifications. Check and ensure that spare parts inventory management and condition are sufficient to support repair and maintenance schedules. Ensure quality, environment, health & safety requirements are met.

Requirements:

• Minimum 10 years of engineering experience with a degree in Electronic and Control Systems Engineering or a recognised degree in the relevant field subject to the acceptance of the engineer.
• Minimum 5 years of engineering experience overseas.
• Minimum 2 years’ experience of working onboard construction vessels related to “offshore wind farms” or “dredgers”.
• Experience in design and electrical diagrams by CAD or other software such as Electrical control diagram and Onboard equipment/vessel design modification
• Experience in method engineering and planning of ships and ship equipment such as Method for piling and WTG installation
• Experience in large dredging project sites.
• Experience in working at civil construction sites.
• Experience in dredging works using TSHDs, Cutter suction dredgers, and or Grab dredgers.
• Good knowledge of underwater dredging/mining work.
• Good knowledge of marine engineering and vessel equipment.
• Experience in planning electrical equipment.
• Good knowledge of Electrical circuit diagrams and Programmable Logic Controllers and programming such as PLC ladder, function block etc.
• Well-versed in ship maintenance requirements
• Positive working attitude and ability to work in a fast-paced environment.
• Positive troubleshooting/finding root cause with the ship's crew on board.

Responsibilities:

• Confirm compliance with IMO, classification society (Class NK) and inspections stipulated by the Japanese government (JG) and comply with technical standards.
• Manage ship-related operations, with operational efficiency and troubleshooting skills.
• To check Ship design drawings and technical specifications
• Maintain appropriate technical drawings, specifications and reports.
• Identifying and resolving problems in the field and proposing improvements to increase efficiency and quality.
• Facilitate coordination with relevant parties (shipyards, classification society, manufacturers, etc.) to ensure smooth operations.
• Thorough control and rapid response in spare parts stock management, repairs and maintenance.

Requirements:

• Minimum 9 years of engineering experience with a degree in Mechanical Engineering or a recognised degree in the relevant field subject to the acceptance of the engineer.
• Minimum 4 years of engineering experience in civil construction.
• Proven track record in the construction of;

o Experience in large size of civil construction project sites over SGD 1000M.

o Dredging works

o Reclamation works

o Caisson manufacturing work

o Construction using a large floating crane (SWL 3,000t or more)

• Good knowledge of marine engineering and structural mechanics.
• Good knowledge of Class NK and Japanese Government ship surveys.
• Experience in planning maintenance and management for working vessels.
• Well-versed in ship maintenance requirements.
• Positive working attitude and ability to work in a fast-paced environment.
• Positive troubleshooting/finding root cause with the ship's crew on board.

Senior Technical Executive

(Building Services, Defects Management/DLP, Enhancement Work, ETFV, Tenancy Services, Plumbing & Sanitary / Gas System, Security Services, Card Access Control (H/W), CCTV, Irrigation, Water Features, Fire Alarm & Protection)

JR108492

Duties:

• Support the Facilities Manager in daily Facilities Operations & Maintenance activities/issues. Manage taking over of the new construction and facilities.
• Record and report the defects in new installation and construction. Review and support the testing and commissioning of the new facilities. Manage critical Facilities System administration, performance monitoring & trending review (Building Management System)
• Ensure the maintenance Specifications are updated and ready in the system. Plan & monitor the Preventive & Corrective Maintenance. Practice Condition-based Maintenance to compliment Preventive Maintenance. Avoid wastages and focus on optimization in FM.
• Ensure maintenance work shall comply with the relevant Singapore Standards and Code of Practices. Ensure maintenance work shall comply with the company’s environment, health, and safety policies. Responsible for the Preventive & Corrective Maintenance work assigned by the Manager. Prepare corrective maintenance work order.
• Attend/report immediately on major equipment breakdown and equipment not performing to specifications or a building user having problem. Meet with tenants to resolve technical issues raised by the tenants. Adopt root cause analysis. Constantly monitor the KPIs specified by the Facilities Manager.
• Train & support the Technician to prepare simple maintenance work order.
• Audit the maintenance work carried out by the Technician and the external service partners according to the departmental policy.
• Actively participate technical training through onsite, offsite, and vendor training. Use the BIM, App or digital technology assigned by the company to facilitate communication. Hold regular meetings with the contractors.
• Act as the Site Incident Controller (SIC) – Leader for the first responders under the Company Emergency Response Team. Submit weekly facilities management report. Responsible for the additional tasks as and when assigned by the Facilities Manager.

Requirements:

• Degree/Diploma in Electrical Engineering or Facilities Management certifications with at least 3 years of experience
• Relevant experience in plant facility, building/property management operation & maintenance environment would be advantageous
• Highly motivated, independent and able to multi-task

At Surbana Jurong, we put talent, hard work, teamwork and a fun workplace together to approach problems and solve them creatively and collaboratively. Join us in making a positive impact on the world!

The Deputy Technical Manager is responsible for all technical operational activities for building/ civil & infrastructure engineering projects, managing the technical department as well as providing engineering & planning services for tender and support services to projects.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Overall responsible for all permanent and temporary works design and design optimization by managing the appointed consultant to ensure that project is delivered within budget
• Responsible for handling client and consultant, coordinate with consultants, client and authorities for design matters and submission.
• Oversee the shop drawings submission and issuance, planning and control delivery of design schedule, monitoring the progress
• Coordinate and support the construction and other departments within the project to fulfil design requirement
• Resolve all technical queries and submit/raise Request for Approval / Information (RFA/I) to concern parties to clarify any ambiguous design details
• Review technical specifications and proposals submitted by Consultants / Subcontractors / Suppliers and produce procurement specifications
• Adherence to safety practices in the work place

Value Add of Position

• Excellent client facing with strong people orientation ability to build and develop positive relations
• Possess strong skill in developing and delivering effective communication to different audiences
• Able to lead and inspire high performance, to ensure project plans are implemented on a timely, efficient and effective basis

Qualifications and Education Requirements

• Education: Degree in Civil Engineering from a recognised university endorsed by PE Board or qualification acceptable to the Commissioner of Building Control
• Experience: Minimum 8 years of engineering experience in delivering large scale projects

Main Responsibilities:

• Develop Business Requirements
• Manage Day to Day application / user support groupLead/assist in module testing/ integration efforts
• Support firm compliance process

Required Skills:

• Knowledge of Perl Korn Shell (or other scripting/programming languages)
• Knowledge of SQL and PL/SQL
• 3-5 years of working experience in treasury products and related financial concepts( Kondor,K+)
• Knowledge of Unix Platform
• Must have strong personality, logical and analytical skills
• Be detail oriented, a quick learner and self-starter
• Possess good verbal and written communication skills
• Must have strong organizational skills
• Candidates with 6+ years of related experience shall be considered for the Project lead position.

Job Description:

• Perform laboratory tests and experiments to assess product attributes, shelf-life, and stability.
• Troubleshooting and problem solving of lab equipment.
• Accurately record and maintain experimental data, reports, and other relevant documentation.
• Perform lab sample preparation and manage sample inventory.
• Oversee laboratory operations, ensuring equipment maintenance, inventory management, and a safe working environment.
• Implement and maintain safety protocols, conduct regular risk assessments, and ensure compliance with relevant regulations.

Job Requirements:

• Min. Diploma in Food Nutrition/Biochemistry/Microbiology or other related discipline, from a recognized institute.
• Hands-on experience in handling analytical instruments such as HPLC, and UV Spectrophotometer, microbial and chemical testing is preferred.

Interested candidates do attach your resume to [email protected]

Attn: Angela Celeste Poh Li Ying (R2095367)

Recruit Express Pte Ltd (99C4599)

Responsibilities

• Broad experience in designing, programming, and implementing large distributed systems with microservices.
• Deep understanding of Application, Infrastructure and security architecture and non-functional aspects like Performance, Scalability, Reliability, Availability etc.
• Translate functional requirements to design.
• Work with technical SMEs to understand their requirements and ensure these are met.
• Define best practices and standards for the microservice implementation.
• Identify and define implementation patterns.
• Lead activities to build accelerators and tools to increase the quality of deliverables.
• Evaluates industry technologies to shape design of services in consideration of cost, portability, compatibility, or usability factors.
• Identifies and makes appropriate changes to technologies, integrated platforms, and systems to meet customer and operational requirements.
• Continuously seeks to more efficiently manage and utilize technology, platforms, and systems.
• Highlights design risks, provide alternative options and recommend quality solution to specified problem.

Essential Requirements (Skills Requirements)

• Bachelor’s degree in Computer Science.
• 7+ years of technical experience within architecture development, integration of backend systems and development.
• Strong Hands–on experience in developing applications using Java/J2EE, with Spring boot framework knowledge and experience.
• Deep knowledge of SOA, Architecture and Design on Microservices, REST Services and Soap Services Development.
• Experience in core java fundamentals, Java 8+, Spring, Springboot, testing framework Junit, Cucumber.
• Strong hands-on with design patterns, clean code.
• Strong hands-on in Java Microservices (Springboot) Restful APIs and Soap Services.
• Experience in designing and coding scalable Microservices.
• Experience with middleware/messaging technologies such as MQ, JMS, Kafka and exposure to event-driven design patterns.
• Experience in Spring Cloud.
• Experience in Azure Kubernetes Service(AKS).
• Experience in configuring and implementing Azure Open Service Mesh for Pod to Pod communication.
• Experience in API Management using Azure API Gateway(APIM).
• Experience in writing deployment pipelines to deploy Java microservices in Kubernetes.
• Strong in creating/ defining Swagger specs for REST APIs, understand REST principles, Guidelines.
• Demonstrated knowledge of OAuth token-based authentication protocol.
• Demonstrated knowledge of PCI and Security Coding Standards.
• Experience with MSSQL, data modelling, query development and performance optimization.

GOOD TO HAVE

• Experience in migrating TIBCO services to spring boot microservices.
• Experience in gaming and Hospitality industry would be an advantage.

Technical / Professional Skills

• Spring Boot, Java/J2EE,SOA,REST and Soap Services, Microservices.

Non-Technical / Soft Skills

• Problem solving skills and ability to work under pressure.
• Good command of English, both written and spoken.

Job Description:

• Carry out site supervision duties in accordance with the Building Control Act.
• Ensure works are done appropriately following the approved drawings.
• Assist the Resident Engineer on all site and/or construction related matters.

Job Requirements:

• Minimum Diploma in Electrical Engineering or equivalent.
• Minimum 10 years of construction experience in supervising electrical works.
• A person with good communication skills and with ability to work in a team.

JOB SUMMARY

• This role is as Senior Accountant within the Group Accounting Policy Team within the Group Accounting Policy.

RESPONSIBILITIES

Strategy

• Establishes and maintains the Group’s accounting policies and the related application guidance and ensures that they are applied in a consistent way on a global basis
• Leads the implementation of new and emerging IFRS accounting standards across the Group, engaging with multiple stakeholders across the business and Group functions and Group Risk in particular
• Engages with external bodies, including regulators, standard setters as well as active involvement with industry bodies and the Group's auditors

Business

• Provides accounting advisory support to client businesses, country and business finance teams and Group functions
• Presents advanced and innovative business-focused solutions to technical accounting issues
• Provides pro-active thought leadership to senior management by developing world-class accounting ideas and solutions

Processes

• Reviews and provides accounting opinions on significant transactions under IFRS
• Performs thematic reviews for significant issues
• Actively participates in the debate on accounting changes, through internal and external forums and the submission of comment letters on emerging accounting and reporting issues, enabling the Group to ensure this best represents the Group's position
• Provides training for the Global finance and businesses through interactive presentations and newsletters

People & Talent

• To lead, inspire and motivate finance team in supporting a base level understanding of accounting.
• Ensure the provision of ongoing training and development of people are suitably skilled.

Risk Management

• Ensures that Operational Risk requirements for Group Accounting Policy are met

Regulatory & Business Conduct

• Display exemplary conduct and live by the Group’s Values and Code of Conduct.
• Take personal responsibility for embedding the highest standards of ethics, including regulatory and business conduct, across Standard Chartered Bank. This includes understanding and ensuring compliance with, in letter and spirit, all applicable laws, regulations, guidelines and the Group Code of Conduct.
• Effectively and collaboratively identify, escalate, mitigate and resolve risk, conduct and compliance matters.

Key Stakeholders

• Group Financial Reporting
• Group Tax
• Country CFOs
• Product CFOs
• Front Office
• Investor Relations
• Risk
• Corporate Development
• Product Control

Other Responsibilities

• Embed Here for good and Group’s brand and values in Group Accounting Policy.

Our Ideal Candidate

• 10 plus years experience in Banking and Finance.
• Experience in IFRS standards.
• Ability to manage multiple stakeholders and proven ability to lead a complex project to completion and within the projected timeframe
• Pro-active and able to think laterally and strategically and have strong analytical skills and is able to analyse complex structural transactions and new product developments
• Ability to work collaboratively and interact with all levels of staff, including senior bank management, and different cultures

Role Specific Technical Competencies

• Spot Opportunities
• Solve problems
• Take the lead
• communicate
• collaborate
• Achieve results

About Standard Chartered

We're an international bank, nimble enough to act, big enough for impact. For more than 170 years, we've worked to make a positive difference for our clients, communities, and each other. We question the status quo, love a challenge and enjoy finding new opportunities to grow and do better than before. If you're looking for a career with purpose and you want to work for a bank making a difference, we want to hear from you. You can count on us to celebrate your unique talents and we can't wait to see the talents you can bring us.

Our purpose, to drive commerce and prosperity through our unique diversity, together with our brand promise, to be here for good are achieved by how we each live our valued behaviours. When you work with us, you'll see how we value difference and advocate inclusion.

Together we:

• Do the right thing and are assertive, challenge one another, and live with integrity, while putting the client at the heart of what we do
• Never settle, continuously striving to improve and innovate, keeping things simple and learning from doing well, and not so well
• Are better together, we can be ourselves, be inclusive, see more good in others, and work collectively to build for the long term

What we offer

In line with our Fair Pay Charter, we offer a competitive salary and benefits to support your mental, physical, financial and social wellbeing.

• Core bank funding for retirement savings, medical and life insurance, with flexible and voluntary benefits available in some locations.
• Time-off including annual leave, parental/maternity (20 weeks), sabbatical (12 months maximum) and volunteering leave (3 days), along with minimum global standards for annual and public holiday, which is combined to 30 days minimum.
• Flexible working options based around home and office locations, with flexible working patterns.
• Proactive wellbeing support through Unmind, a market-leading digital wellbeing platform, development courses for resilience and other human skills, global Employee Assistance Programme, sick leave, mental health first-aiders and all sorts of self-help toolkits
• A continuous learning culture to support your growth, with opportunities to reskill and upskill and access to physical, virtual and digital learning.
• Being part of an inclusive and values driven organisation, one that embraces and celebrates our unique diversity, across our teams, business functions and geographies - everyone feels respected and can realise their full potential.

Recruitment Assessments

Some of our roles use assessments to help us understand how suitable you are for the role you've applied to. If you are invited to take an assessment, this is great news. It means your application has progressed to an important stage of our recruitment process.

Visit our careers website www.sc.com/careers

Roles & Responsibilities:

- Provide support to the superintendent in the planning, execution, and finalization of dry dock and repair projects, and attend the project site as required.

- Assist the superintendent with the preparation of the OPEX budget.

- Coordinate and arrange service engineers for boarding operations.

- Review, update, and prepare vessel shareholder presentations for timely submission.

- Maintain records of fleet service arrangements and End of Month (EOM) reports, including technical bulletins from manufacturers.

- Prepare and complete monthly post-meeting reports for Charterers/Fleet.

- Administer the disbursement account, ensuring line items and account codes are accurately detailed.

- Review Management Meeting minutes and provide a summary to the superintendent.

- Distribute monthly Class status reports to vessels, including details on expiring certificates.

- Assist with tasks related to EU ETS, EUMRV, and IMO DCS compliance.

- Support the review and processing of PAL occurrences as guided by the Fleet Manager, and help the superintendent close occurrences using Tableau data.

- Appoint Agents following the superintendent's instructions.

- Handle any other required documentation and filing tasks as assigned by the team.

- Assist the superintendent with Guarantee claims management.

- Support both internal and external Survey and Audit Requirements.

- Monitor and report progress on the Teams' "Management of Change" initiatives.

- Review and manage fleet weekly operational data and monthly KPIs, ensuring that the fleet team stays informed.

- Create and finalize presentations for Charterers/Owners as needed by the Fleet team.

Requirements:

- Bachelor’s Degree (preferably in ship management, maritime operations, or a related science discipline).

- Training in Secretarial skills.

- Excellent written and verbal communication abilities.

- Motivated to thrive in a dynamic, challenging, and results-oriented environment.

- Fresh Graduates are encouraged to apply!

Full-Time

Company Overview:

Our Company is a leading IT company. We are committed to innovation, growth, and delivering exceptional value to our clients. We are seeking a visionary and dynamic Chief Technical Officer (CTO) to lead our technology strategy and drive our technological vision forward.

Position Overview:

The Chief Technical Officer (CTO) will be responsible for overseeing all technical aspects of the company, including product development, software architecture, technology strategy, and IT operations. This role requires a strategic thinker who can align the company’s technology with its business goals, lead a high-performing technical team, and ensure the delivery of scalable and innovative solutions.

Key Responsibilities:

- Technology Leadership: Develop and execute the company’s technical strategy in alignment with business goals. Identify and implement innovative technologies that give the company a competitive advantage.

- Team Management: Lead, mentor, and manage a team of engineers, developers, and IT professionals. Foster a culture of innovation, collaboration, and continuous improvement.

- Product Development: Oversee the design, development, and deployment of products and services. Ensure that products are delivered on time, within budget, and meet quality standards.

- Strategic Planning: Collaborate with executive leadership to define business strategies and objectives. Provide insights on technological trends and advise on the potential impact on the company’s operations and strategy.

- Budget Management: Develop and manage the technology budget. Ensure cost-effective use of resources while maintaining high-quality technology standards.

- Risk Management: Identify and mitigate technical risks related to data security, system reliability, and project delivery. Ensure compliance with industry regulations and standards.

- Vendor Management: Evaluate and manage relationships with external vendors and partners. Negotiate contracts and ensure service level agreements (SLAs) are met.

- Innovation and R&D: Lead research and development efforts to explore emerging technologies. Evaluate their potential application to enhance products, services, and processes.

Qualifications:

- Bachelor’s degree in Computer Science, Engineering, or a related field; a Master’s degree or MBA is preferred.

- Minimum of 10 years of experience in a senior technology leadership role, preferably as a CTO or similar.

- Proven track record of managing and scaling technical teams.

- Strong understanding of software development, architecture, and agile methodologies.

- Experience with cloud computing, data analytics, cybersecurity, and emerging technologies.

- Excellent communication and interpersonal skills, with the ability to work effectively with both technical and non-technical stakeholders.

- Strong problem-solving skills and the ability to make decisions under pressure.

Preferred Qualifications:

- Experience in IT industry.

- Knowledge of regulatory requirements in IT industry.

- Experience in scaling startups or leading technology transformations in established companies.

Job Summary

We are seeking a Technical Drafter to collaborate with architects and engineers, using CAD software to create detailed technical plans and ensure compliance with regulations.In addition, to provide support for both on site and project administrative work.

Mandatory Skill-set

• Diploma/Degree in Electrical & Electronics / Mechanical Engineering / Mechanical Design / Computer Science / Software Engineering;
• Has 1-2 years of experience in developing and building 3D models using AutoCAD / AutoDesk;
• Good understanding of scaling and dimensioning;
• Knowledge of mechanical, electrical and structural design;
• Familiar with project milestones and schedules;
• Excellent communication and interpersonal skills;
• Strong problem-solving skills and the ability to work independently and collaboratively in a team environment.

Desired Skill-set

• Familiarity with construction knowledge.

Responsibilities

• Responsible to develop CAD drawings using Autodesk system to prepare engineering blueprints based on project design specifications;
• Collaborated with engineers and contractors to ensure seamless integration of engineering designs; collate the structural cabling layer into the overall master blueprints;
• Ensure compliance with company standard drawing procedures in blueprint review;
• Attend weekly meeting with related project personnel on design updates;
• Coordinated with multiple suppliers to ensure timely delivery of construction materials, minimizing project delays and cost overruns;
• Monitor and support (administrative) the construction progress and address site-related issue.

Should you be interested in this career opportunity, please send in your updated resume to [email protected] at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE’s website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

EA Licence No. 07C5639