Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Roles & Responsibilities

The incumbent shall be responsible for, but not limited to the following scope of tasks and duties:

1. Carry out all preventive, predictive and corrective maintenance as directed by the Supervisor and clear completed work from the CMMS data base.
2. Responsible for the proper maintenance on various rotating and static equipment and systems including the plant piping systems and structural support systems.
3. Response and resolve work orders for any mal-functioning for static and rotating equipment in the facility. Ensure minimum down time or timely repairs of production equipment.
4. Determine materials, spares, tools and method required to complete maintenance task safely.
5. Plan and execute machinery condition monitoring and field data collection with production team and engineers.
6. Ensure all plant valves are fully operational and all mechanical components properly grease and lubricated where applicable, including carry out, strip, redress and rebuild of various types of control and plant valves.
7. Supervise and work closely with in-house contractor and equipment vendor to execute maintenance work at the terminal. Ensure safeguards are followed such as valid work permit are issued, wearing prescribed personal protection equipment etc.
8. Liaise with production team with all aspects of mechanical system testing, running, trouble-shooting, carry out material specification checks on all installed piping components such as gasket, bolts, etc.
9. Able to take on additional tasks or responsibilities as assigned by superiors.
10. Able to perform valve line up & LOTO for operations or maintenance preparations.
11. The incumbent shall be part of the Company's Emergency Response Team(CERT) and perform any assigned roles and responsibilities (ie fire fighter etc) for such purposes.

Work Experience

1. Minimum of 3-5 years practical experience in the oil and petrochemical refinery.
2. Experience in hands-on troubleshooting of mechanical/ machinery systems i.e compressor/pump and diesel/gas engine.
3. Familiar with Permit to Work system and local codes, regulations and standards requirement.
4. Proficient in usage of Microsoft Office and trained in the use of the Computerized Maintenance Management System (CMMS); ie SAP.
5. Ability to speak, write and communicate effectively in English.
6. Experience with LNG/Natural Gas or gas engine generator maintenance and operations will be an added advantage.
7. In addition, successful candidate should possess the following personal attributes:

• A team player who can work well in a team and with good listening skill
• High self-motivation with the ability to work with minimal supervision & adapt to changing priorities and assignments.
• Willing to take up new challenges and responsibilities
• Fast learner

Education Requirement

The candidate must possess a Professional Certificate/NiTEC, Diploma in Engineering (Mechanical/ Mechatronic/ Electromechanical) or equivalent.

Job Responsibilities:

• To perform mechanical fitting job, machine assembly and maintenance, which requires knowledge of machine fits and tolerances
• To lead a team of technicians in preventive maintenance, checking and inspection, troubleshooting, repairs and overhauls of machinery and equipment having assigned and allocated resources to meet targets through planned and scheduled annual maintenance activities
• To carry out metal working for hot works
• To execute welding work
• To operate heavy machinery and perform lifting works
• To read mechanical drawing

Job Requirements:

• Candidate must possess at least secondary school education/ NITEC
• Past experiences in heavy industry/ metal fabrication shops/ machine maintenance will be preferred
• Candidate should possess basic knowledge of computer and data entry, and basic command of English (ability to read, write and speak)
• Able to work rotation shift and weekends

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Job Description:

• Responsible for carrying out field duties according to the Standard Operating Procedures (SOPs) and / or Operation Supervisor’s instructions.
• Perform unit start-up, shutdown and plant turnaround activities according to the Standard Operating Procedures (SOPs).
• Perform planned rounds (Field / DCS) and take corrective action to maintain equipment and plant operations within safe operating limits and product quality compliance.
• Monitor unit performance to ensure safe and optimal operation of the plant equipment, pipeline distribution network and other facilities.
• Prepare process equipment for maintenance service, this includes line purging, LOTO.
• Take part in operating procedures development and prepare job pack documentation for equipment repair.
• Perform troubleshooting, resolve field operational issues and provide support for engineering, operation and maintenance teams.
• Execute according to production schedules and achieve operation targets in a cost-effective manner.
• Perform any other tasks which may be assigned to him by Ops Supervisor or Ops Manager.
• Safety is a core value at Veolia, and a precondition for employment. You are expected to uphold the Veolia Always Safe rules and set an example to all colleagues in your daily work routine.
• Ethics and compliance are two areas where our rules and our standards are strictly non-negotiable. You are expected to stick to ethics and compliance rules and standards which ultimately mean doing your job properly and conducting our business like true professionals, whatever our missions and our place in the Group.

Job Requirements:

• Minimum GCE ‘N’ Level certification with 3 – 5 years of relevant work experience.
• Candidates without any relevant experience will be considered as training will be provided.
• Experience in ISO-tanker unloading, incineration and water treatment operations will be added advantages.
• Candidate with a forklift licence is a plus point.
• Must be prepared to work rotating shifts, weekends and Public Holidays.
• An effective team player with good communication skills.

Successful candidate will be working in the main office located at 15 Tuas View Circuit, Singapore 636968. Company transport is provided.

Company Overview

Atera Water is a Singaporean water technology start-up, specialising in providing filtration membrane solutions for water and wastewater treatment. The company specialize in economically viable and environmentally friendly filtration technologies, designed to empower communities to tackle water challenges amidst climate change and high costs of advanced filtration membranes.

The company is scaling up our membrane production for pilot and commercial projects in SEA region. We are looking for full-time technician to support the manufacturing of membrane products.

Responsibilities

1. To support membrane manufacturing activities, which includes fibre spinning, looping, stretching and treatment process.

2. To assist in managing inventory of raw materials, components, and finished products

3. To maintain proper records of each batch of newly manufactured products and ensure proper labelling and documentation.

4. To assist in preventive maintenance, checking, inspection and troubleshooting of manufacturing equipment.

5. To ensure that membrane products are manufactured with appropriate quality and on schedule with project or customer requirement.

6. To comply with standards, regulations and safe work practices.

7. To provide supporting duties for product testing, when required.

Requirements

· Minimum Higher NITEC/Professional Certificate in Engineering or Manufacturing or equivalent

· Diploma without experience is welcome to apply and willing to be trained

· Experience in polymer processing and extrusion processes would be an advantage

· Possess a positive attitude and sense of urgency

· Meticulous, keen attention to details and organized.

· Team player and able to work independently

* This is a 1 year contract role (subject to extension/conversion) *

Key responsibilities:

• Perform hands-on mechanical/electrical assembly tasks within the standard time
• Ensure that the assembled machine is according to Makino's quality standards
• Responsible for keying the operation time into EES for performance measurement
• Responsible for housekeeping and ensuring that the assigned machine area is clean and tidy
• Carry out duties in according with Quality Policy, EHS control procedures and WIS
• Ensure that all machine tools and instruments are properly calibrated and taken care of

Job requirements:

• Minimum NITEC/Higher NITEC in Mechanical/Electrical Engineering, or a related field
• Experience working in Assembly/Production is an added advantage
• Able to work shifts and commit to overtime on weekdays and weekends when required
• Able to handle physical work and stand for long hours
• Able to read and interpret drawings
• Have the initiative to learn and produce quality outcome
• Responsible and committed to the assigned task
• Team player and able to work independently

• To perform general maintenance duties in building & machineries & equipments.
• To perform preventive maintenance on machines & equipments bt cleaning, lubricating, greasing etc for optimization.
• To perform minior electrical work not requiring licence such as office lighting, appliances etc.
• To apply paint or varnish all types of surfaces for protection
• Perform related duties as required such as external support or repair
• To assist in recording facility utilities.
• To carry routine inspections on all operating machineries & equipments
• To ensure all ad-hoc work are carried out

Minimum ITE with relevant fields

Able to work as a team

Efficient and adhere to KPI's given

Conform to WSH guidelines

Work at height certificate a plus

Job Description:

• Possess the skills to inspect, diagnose, repair, and maintain trucks
• 检查及维修卡车
• General troubleshooting of vehicle according to complain
• 跟据顾客要求检查及解决汽车故障
• Ability to pinpoint parts to be purchased and understand the part list
• 清楚的指出须要更换的零件
• Maintain proper service records on job done and read job orders
• 记录汽车维修及读工作单
• Perform diagnostics and repairs on trucks (mechanical, electrical, and electronic & aircon system replacement).
• 对卡车进行诊断和维修（机械、电气和电子,空调维修）。
• Overhaul power steering, engines, ESCOT gearboxes, rear axles, and emission systems.
• 检修动力转向系统、发动机、ESCOT 变速箱、后轴和排放系统。

Job Qualification (Skills & Requirements):

• Minimum 3 years’ experience 至少3年经验
• Able to understand basic English基本英文
• Able to multitask, prioritize and manage repair job efficiently
• 能够高效地执行多任务、确定优先级并管理维修工作
• Detail-oriented with a strong commitment to providing high-quality work
• 注重细节，坚定致力于提供高质量的工作
• Ability to work both independently and as part of a team 能够独立工作和团队合作
• Physical capability to lift up to 20kg and perform tasks associated with automotive repair
• 具备举起 20 公斤重物并执行与汽车维修相关的任务的身体能力
• At least a Professional Certificate/Nitec in Automotive Technology or a former NTC 2/3 in Motor Vehicle Mechanics.
• 至少拥有汽车技术专业证书/Nitec 或机动车机械师前 NTC 2/3

Job Description:

• Prepare and operate CNC machine tools to perform drilling, milling and other tasks.
• Able to understand the specifications and expected results of the task at hand by reading design drawings, mechanical drawings, etc.
• Translate instructions into computational commands so that the machine can perform the correct function.
• To supervise and monitor when the machine is performing task and able to make necessary adjustments to produce better results.
• Have experience in operatingt a milling machine.

Skills:

• Know Mastercam CNC machining programming software system/G-code.
• Able to read and understand mechanical documents and drawings, such as 2D/3D.
• Must have a basic understanding of computer programming.

Requirements:

• Qualification: ITE/NITEC
• Minimum 2 years of relevant experience
• Bilingual in English and Chinese

Key roles and responsibilities

• Site sampling and testing of Indoor Air Quality & Industrial Hygiene Air Monitoring test in various industries
• Perform maintenance, troubleshooting & calibration of sampling equipment
• Ensure proper documentation and records updating at the end of each working day
• Generate reports including evaluation, discussion and reporting of the test results to clients
• Ensure safety and adhere to all Safe Work Procedures
• Ad-hoc duties assigned

Skills & Experience

• Diploma in ITE/NITEC qualification or equivalent
• Proficient in Microsoft Excel, Word and Outlook
• Training will be provided
• Able to write & communicate in English
• Self-driven, team player with initiative, willingness to learn and good communication skills
• Able to work in a fast-paced working environment, and able to multi-task.
• Must be able to commit OT
• Possess a valid Singapore Class 3 driving license

Benefits

• Basic + OT + Driving Allowance
• Annual variable bonus (performance base)
• Medical benefit
• Career development plan through continuous and structured training program
• Handphone Reimbursement

Based in Tuas (Transport provided)

Company Benefits:

• 37.5 hour work week (additional hours is paid OT)
• $499 worth of annual vouchers to buy Coca Cola products
• 18 days annual leave
• Medical coverage + Dental - $400 / year
• Medical & Dental coverage for self AND dependents
• 2 way transportation for both shift timings from 18 pick-up points island-wide
• 5 days work week
• Rotating shift: Morning (7:30am – 4pm), Afternoon (3:30pm to Midnight)

Pacific Refreshments Pte Ltd (Coca-Cola Singapore) is a strategic concentrate manufacturing plant in Asia. We are an export facility, specializing in the manufacturing of concentrates and beverage bases, with a complex portfolio, supporting the ASEAN, South Pacific and Southwest Asia business units. We are on a journey of growth - having completed the construction and expansion of our site towards doubling our manufacturing capacity in recent years. We have also embarked on our digital transformation journey, striving to be the Lighthouse for the Consumer Products Supply (CPS) plants in Asia and to be a leader in digital transformation.

We champion a safety-first culture, dedicated to protecting our employees' well-being and fostering a secure workplace that values each individual.

Pacific Refreshments Pte Ltd is a winner of the ‘2020 HR Asia Best Companies to Work For’ Award.

Job Summary

The main function of this job is to generate maximum output of quality products through effective use of assigned resources and assets. To achieve this goal, this position has:

• technical skills in optimizing / maximizing production, yield and product quality
• implement and maintain quality systems, improvement projects and other initiatives.
• tasks in line operation (at least 3 different work stations)

Operation and performance

• Achieve line and batch efficiency and output requirements as targeted by superior / management.
• Maximize output by reducing downtime through monitoring and controlling changeover / maintenance / breakdown time.
• Produce the right quality by managing all CCPs and quantity according to the process order.
• Ensure proper product labelling, coding and other information accurately.
• Carry out the right cleaning, sanitation and GMP according to Quality System requirements.
• Proper handover before going on leave / changeover shift.
• Follow strictly safety and environment requirements at the workplace.

Improvement projects

• Support various initiatives by contributing idea, hands on experience, solutions and others.
• Assist to conduct trials, collect data and trouble shoot machines as and when it is necessary.
• Participate in root-cause analysis and corrective action development sessions as required.

Job Requirements:

• Preferable 1 - 2 years experience in food manufacturing company in similar position. Other manufacturing and electronics industries are welcome too.
• Good technical knowledge and skills in line operation and machine maintenance/repair.
• Nitec / Diploma in Engineering or related technical field.

Responsibilities

• Attend to daily operations team, such as installation, maintenance, replacement fabrication and repairs.
• To execute work plan and ensure job compliance to quality standards.
• Supervise and oversee the mechanical team to ahieve best operational efficiency
• Attend to ad hoc job at train and bus depots
• Responsible for personal and safety of others accordance to workplace and health safety act

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently or through team activities.
• Self-motivated, highly resourceful and organized.
• Self-disciplined to carry out tasks responsibly.
• Work co-operatively in a team with other technicians to complete assigned tasks.
• Have positive and pleasant attitude.

Machinery Mechanic/Technician

Job Description:

• Good job knowledge of marine heavy Equipment Mechanical works, troubleshoot, remove re-installation and repair works (Such as Cranes, motors, generators, and pumps etc.）
• Good job knowledge of Heavy Equipment Electrical work, troubleshoot and repair Equipment Electrical related matters.
• Attend Breakdown
• Provide technical assistance to service operations
• Other ad hoc duties assigned by supervisor/management

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

• Provide routine, preventive and corrective maintenance, troubleshooting and overhaul on process equipment such as piping, pressure vessel, pump, compressor, etc.

• Diploma or NITEC in a relevant Engineering discipline
• At least 3 years' relevant experience in an oil refinery/petrochemical plant
• Candidates without relevant experience may be considered for entry-level positions.

Responsibilities

· Installs and repairs wiring, fixtures, and equipment for all electrical services aboard ship and in shipyard facilities, following blueprints and wiring diagrams

· Installs conduit to bulkheads with brackets and screws, using hand tools, and threads wires through conduit to terminals, for example connection boxes, circuit breakers, voltage regulators, and switch panels.

· Tests electrical characteristics, for example, voltage, resistance, and phase angle, in circuits, using voltmeters, ohmmeters, and phase rotation indicators

· Troubleshoots electrical equipment and circuits using appropriate test equipment to detect and effect required maintenance, repairs, or replacement requirements

· Performs maintenance and repair of generators, switchboards, controllers, circuit breakers, electrical motors, distribution panels, alarm and lighting circuits

· Conducts insulation resistance measurements of electrical cables to determine condition and effects repairs or replacements as required.

· Maintains electrical system maintenance histories notating date, and extent of repairs and/or alterations

· Adhere to Bizsafe safety standards and ISO quality standards

· Electrical automation control system: to install, troubleshoot, repair and modify the new control system.

Requirements

·Willing to work in outdoor harsh conditions e.g heat, oil, noise and dust

·NTC/Higher NTC in Electrical/Mechatronics/M&E Engineering and related field.

·Preferably with at least 1- 2 years working experience in electrical repairs and maintenance.

·Preferably to have experience in DC/AC motors, Generators, Switchboards and Circuit breakers.

·Able to perform troubleshooting and fault rectification during daily operations

·Positive-attitude

·** High OT

Job Purpose

The candidates will focus on product quality testing including but not limited to sample preparation, machine operation, trials and tests on Thermoplastic Polyurethane (TPU) in accordance with stipulated guidance. Conduct technical activities such as conduct test/analysis and/or generate report based on customer’s complaints, troubleshooting and so forth.

Job Responsibilities

• Perform routine tests/analysis on mechanical properties (e.g. tensile, hardness, abrasion, MVR, density, impact etc.), product extrusion quality, analysis (e.g FTIR, DSC etc) and so forth.
• Prepare test specimen by injection and/or extrusion.
• Maintain systematic documentation practice in compliance with ISO requirements. Ensure accurate and timely update of analysis reports and other documents.
• Develop work instructions and standard operating procedure and ensure strictly compliance with ISO requirements.
• Support internal/external ISO audit activities.
• Set up and revalidate methodology so as to ensure continuous improvement in product quality.
• Conduct lab analysis/retest, generate report and follow up on customers’ complaints.
• Ensure proper storage and management of retention samples and raw materials.
• Troubleshoot and carry out basic maintenance work of lab equipment/machine.
• Carry out safety and housekeeping activities in the lab.
• Conduct Trial/test/analysis and provide support to R&D and Technical Support team if necessary.
• Ensure that all consumables are sufficient for daily operations.
• Any other duties as and when assigned by superior.

Job Requirements

• ITE/ Diploma/ Bachelor Degree in Chemistry, Polymer Science, Materials Science or Engineering.
• At least 1 to 2 years working experiences in polymer industry, preferably in plastic/elastomer testing and processing.
• Possess good knowledge of chemicals.
• Basic laboratory knowledge and methodologies.
• Excellent interpersonal and communication skills. Able to work effectively with inter- and cross-functional teams.
• Good team player and willing to collaborate with different stakeholders to achieve common goals.
• Meticulous with an eye of accuracy.
• Proficient in MS Office.
• Able to work under fast-paced environment.
• Ability to prioritize tasks based on urgency.
• On-the-job training will be provided.
• Candidate must be willing to work in Jurong Island.

• Perform maintenance and repair on customer vehicles.
• Identify problems with vehicles using the diagnostic equipment.
• Explain automotive repairs and issues and provide great customer service.
• Plan repair procedures using charts manuals and experience.
• Test the functionality of parts and systems
• Perform basic auto care and maintenance tasks such as oil changes, fluid level checks, and tire rotation.
• Repair and replace brake pads, wheel bearings, sensors and other parts.
• Perform routine maintenance and general mechanic work on vehicles.
• Prepared to get additional certification as needed.
• Willingness to learn with hands-on training.
• Help keep repair shop clean and organized.
• Keep a professional appearance.

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

Carry out routine, preventive and corrective maintenance, troubleshooting and repairing of instrument, analyser and electrical equipment, e.g. control valve, transmitters, switchgear control, motors, GC, boiling point, freeze point and flash point analyser, etc.

Diploma or NITEC in a relevant Engineering discipline

• At least 3 years relevant experience in an oil refinery/petrochemical plant, preferably with EMA license
• Candidates without relevant experience may be considered for entry-level positions

Job Description

• Efficiently and effectively manage and operate assigned processing or packaging operation according to the standardized operating procedures, guides and manual
• Ensure the correct cleaning and sanitation of processing equipment are rendered following Good Manufacturing practices

Job Requirement

• A good team player to achieve production targets
• Self motivated and work with least supervision
• Able to be on the feet for long hours
• Transportation provided
• Candidates with relevant experience are preferable
• More focused on attitude rather than educational level
• 5.5 days week with OT's & perks

Job Description:

• Investigate, troubleshoot and resolve IT-related issues (including software, hardware, systems, networks, printers and scanners).
• Support all IT infrastructure and operations within the company, while ensuring the security and privacy of networks.
• Manage vendors on IT matters such as issue escalation and projects.
• Provide support in the operation of all technologies including office networks.
• Setting up and maintaining of equipment
• Ensure security and privacy of networks and computer systems.
• Establish and ensure proper IT asset tracking including hardware and software licenses.
• Maintain IT Systems, inventory, and infrastructure documentation.
• To assist the team in all IT-related duties and activities.
• Setting up accounts for new users n management of dc
• Support HR in onboarding new joiners to set up their computers and run through an IT induction on their first day.

Job Requirements:

• High Proficiency in MS Office
• In-depth understanding of diverse computer systems and networks
• Good knowledge of internet security and data privacy principles
• Basic understanding in TCP/IP and LAN technology
• Knowledge of Windows
• Translate business requirements, questions, problems related to innovative and effective IT solutions related to Mid-range workflow, ECM and middleware systems.
• Proactive team player with the ability to work independently with minimal supervision
• Good communication and problem-solving skills
• Must be able to commit to 5 work days and 1 Saturday (half-day) per month.

KEY DUTIES AND RESPONSIBILITES:

• Perform various activities and tasks required in the tablet coating production areas.
• Operate all relevant equipment, clean, assemble and maintain the cleanliness of the equipment.
• Perform and maintain the documentation of operations in accordance with cGMP requirement.
• Operate the equipment appropriately in accordance with Standard Operating Procedure / batch document.
• Perform online monitoring of in process parameters / checks throughout the batch.
• Complete all relevant records and other documentation required for tablet coating, maintenance and cleaning of equipment in the work area.
• Perform all activities in accordance with cGMP.
• Maintain the cleanliness of work area to ensure cGMP compliance.
• Perform all other relevant duties required to meet the schedule.
• Check relevant material and product details against batch document
• Co-ordination with Engineering for break down rectification of coating and related solution mixing equipment.
• Involve in equipment / process qualification.
• Participate in investigation of process deviation, cGMP and all other compliance related matters, where applicable.
• Ensure compliance to GxP / Safety / Quality policies.

REQUIREMENT

• Good understanding of safe working practices and cGMP.
• Experience in tablet coating of oral solid dosage manufacturing is preferred.
• A good team player with positive learning attitude.
• Willing to work in Tuas area, in cleanroom environment with full gowning.

EDUCATION & EXPERIENCE

• Minimum GCE 'O' level or NITEC or Higher NITEC or Diploma in Biotechnology /Biomedical / Mechanical / Mechatronics Engineering or relevant disciplines
• With 2-5 years of manufacturing experience in Pharmaceutical or related industries.
• Entry level NITEC / Higher NITEC / Diploma candidates are welcome to apply.

Responsibilities

• Attend to daily operations team, such as installation, maintenance, replacement fabrication and repairs.
• To execute work plan and ensure job compliance to quality standards.
• Supervise and oversee the mechanical team to ahieve best operational efficiency.
• Attend to ad hoc job at train and bus depots.
• Responsible for personal and safety of others accordance to workplace and health safety act.

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently or through team activities.
• Self-motivated, highly resourceful and organized.
• Self-disciplined to carry out tasks responsibly.
• Work co-operatively in a team with other technicians to complete assigned tasks.
• Have positive and pleasant attitude.

Responsibilities:

· Provide timely IT support to all company users, and when necessary, liaise with vendors for support.

· Leveraging technologies to help in improving the organization's efficiencies and productivity.

· Ability to troubleshoot network, hardware, and software problems.

· Company Windows server maintenance.

· Responding in a timely manner to service issues and requests.

Requirements

· Minimum 1-2 years relevant experience in IT infrastructure.

· Knowledge in TCP/IP, DHCP, Windows systems, and Windows Server.

· It would be better if there's understanding about smart factory settings such as IoT, MQTT, etc.

You may use the link to submit your job application

https://sy.seikowall-idd.com/TH6/public/hr/recruitment/eform_v1.xhtml?comp=SWPL

About the role

To support R&D department in conducting laboratory tests, sample preparation and executing technical and quality control documentation/testing while co-ordinating with various departments to ensure smooth running of the organisation.

Roles & Responsibilities

Sample Preparation

• Receive and label all raw materials brought into the lab for accountability.
• Maintain inventory of chemicals.
• Prepare materials for experiment and assist R&D activities..
• Assist R&D Engineer to conduct experiments and operate equipment.
• Assist in the procurement and placement of all consumables, equipment and fixtures.
• 
  

Measurement & Calibration

• Perform periodic calibration of equipment and reporting of any malfunctions.
• Assist in troubleshooting and maintenance of all testing equipment.
• Ensure proper housekeeping of laboratory on a daily basis.
• Maintain and record equipment faults.
• Troubleshooting of analysis methods.

Perform Laboratory Data Analysis and Reporting

• Recording and reporting of experimental results and trends.

Quality Control

• Perform in process quality check and physical test on in-process materials & finished products
• Testing of properties of aerogel products and co-ordinating with 3rd party laboratories.
• Prepare QC documents for all batches in production department

Compliance with Safety Protocols and Local Regulatory

• Assist with the application and maintenance of all necessary governmental licenses related to the laboratory.
• Assist workplace safety initiatives.
• Implement and manage waste disposal and coordinate with chemical disposal companies.

Requirements

• ITE / Diploma in Chemical Engineering, Chemistry, Biotech, Lifesciences and Pharma etc.
• Years of work experience: At least 1 - 3 years.
• Training will be provided.
• Knowledge of safe handling of chemicals
• Possess basic computer skills and Microsoft Office applications.
• Team player and able to work independently

To apply:

You can apply directly by sending your cover letter and resume directly to [email protected] quoting ‘Qua_Ctrl in the subject line. In the CV/resume, outline why you would be the best fit for this job, date of availability, details of your educational background and work experience.