• Perform Corrective and Preventive Maintenance of wafer fab manufacturing equipment.
• Support the running of production in the module and ensure the readiness for production
• Maintain 6S practices in the Fab and maintenance support areas
• Participate and follow up on continuous improvement projects
• Provide clear and accurate pass down of line issues and documentation

Requirement

• Candidate must possess at least Diploma in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
• No work experience required.
• Preferably Entry Level specialized in Engineering - Mechanical/Automotive or equivalent.
• Work overtime during weekends and public holidays
• Working in cleanroom

Responsibilities:-

• Performing Goods Receipt
• Labelling and Packaging of components
• Inventory storage and housekeeping
• Training will be provided

Requirements:-

• At least 5 years experience in relevant or related field
• Good communication and interpersonal skill
• Proactive with good initiatives, problem solving skill and analytical ability
• Able to work under pressure
• Able to work any shift
• Able to work OT on weekends and public holiday
• · Must be able to work night shift and split shift
• · Must be able to work extra hours or weekend if needed

• Troubleshoot and carry out minor repairs (electrical, plumbing, builder, etc) for the building and related facilities.
• Supervise sub-contractors who carry out approved repair works and scheduled maintenance in the building.
• Assist Facilities Executive & officer to execute preventive maintenance regime and/or ad-hoc upgrading project and monitor the work progress.
• Assist Facilities Executive & officer to attend to tenant’s feedback on the building and related facilities.
• Provide guidance and coaching to junior staff when required.
• To carry out routine servicing in M&E systems (i.a.w. operation requirements).
• To provide initial fault response reported by client.
• Updating and follow up on completed/outstanding faults status.
• To supervise specialist contractors maintenance activities (as & when required).
• To carry out shift duties.
• To carry out additional tasks as instructed by company/ immediate supervisor.

· Carrying out diagnostic for van and lorry

· Carrying out mechanical repair for van and lorry

· Carrying out electronic repair for van and lorry

· Carry out engine overhaul and chassis repair

· Able to repair air condition

· Conduct preventive maintenance for vehicle

· Ensure that all work order is carried out accordance to the schedule

· In Charge of Vehicle movement and parking

REQUIREMENT

· Min. 5-year relevant workshop experience dealing with commercial vehicle

· Familiar with light to medium size van & lorry and the servicing of major brand such as Toyota, Nissan, Mitsubishi, Isuzu and Hino

· Familiar with both Petrol and Diesel engine

· Possess positive learning attitude & a good team player

· Good interpersonal and communication skill

· Must be able to work night shift and split shift

· Must be able to work extra hours or weekend if needed

Role :

Perform engineering duties in equipment installation, testing and after sales service.

Responsibilities:

· Carry out on site equipment installation, testing and commissioning

· Perform maintenance, trouble shoot and repair of environmental machinery and system

· Work in accordance with project scope and schedule

· Any other duties as assigned

Job Requirements:

· Candidate must possess at least ITE certificate (Nitec) / Diploma in mechanical or electrical fields / alternatively, candidates who possess relevant qualifications and experience in machine trouble shooting and repairing

· Knowledge in machine assembly, pneumatic, electrical, control panel wiring and assembly is an advantage

· To be involved in machine installation and commissioning

· Minimum 3 years of working experience

· Possess valid Class 3 driving license is an advantage

· Able to work independently and self-motivated

· Able to work well as a member of a team

· Good interpersonal and communications skill

Working location: Tai Seng

Remuneration packages commensurate with qualifications and relevant working experience.

Interested candidates are invited to email your detailed resume indicating expected remuneration, date of availability, together with a photo to [email protected]

If you fancy a cool, easy-going atmosphere full of dynamic and spirited individuals, you are at the right place.

We are on the lookout for passionate, optimistic and fun-loving people to join our big family of Wonderful People.

With our wide array of hotels and brands, there are countless opportunities and exposure to work in different stories. You will be immersed with prospects in career and learning development, employee recognition, mentorship and benefits even when you travel.

Job Details (Here’s what you can expect!)

• You get to travel and work in our 25 hotels in Singapore
• Duty meal allowance
• Uniforms provided
• Attractive incentives and bonus
• Staff rates at Accor hotels in Singapore and worldwide

Job Responsibilities:

• Attend to complaints/reporting of breakdown of services within the hotel premises
• Diagnostic testing and inspection for all electrical and mechanical equipment, sanitary and plumbing system and arrangement of faulty items for repair work
• Diagnostic testing and inspection of air-conditioning system
• Any other ad-hoc duties assigned

Job Requirements:

• 1 to 2 years working experience, preferably with relevant hands-on experience in building related or hospitality industry
• Resourceful, proactive and team player
• Good interpersonal and communication skill

• Troubleshoot and carry out minor repairs (electrical, plumbing, builder, etc) for the building and related facilities.
• Supervise sub-contractors who carry out approved repair works and scheduled maintenance in the building.
• Assist Facilities Executive & officer to execute preventive maintenance regime and/or ad-hoc upgrading project and monitor the work progress.
• Assist Facilities Executive & officer to attend to tenant’s feedback on the building and related facilities.
• Provide guidance and coaching to junior staff when required.

Responsible to set-up and operate CNC Machine Milling, Lathe

• Able to perform simple programming (For CNC machines only)

• Conduct first piece inspection

• Report to management in the event of non-conformance of components

• Adhere to good quality, housekeeping, and safety practices

• Perform 5S

Detailed

• Perform duties assigned by Engineering

• Check Routing Sheet details against drawings are correct before machining

• Maintain good housekeeping in the areas of work

• Always follow Company’s safe working practices and requirements

• Comply with safety measures and practices of the Company

• Report any unsafe conditions and practices to Production Superintendent or Engineering Assistant

• Ensure that a machining and inspection procedure is compiled to meet Quality Management System requirements and Quality Objectives

• Ensure adherence and compliance of the Quality Management System and achieve Quality Objectives

• Check raw material dimension before machining commencement

• Carry out the day-to-day machining operation in accordance with Routing Sheet and required date

• Perform 100% in-process inspection and recording inspection result

• Identity any non-conformance product and inform the problem to Production Superintendent or Engineering Assistant

• Check and report raw material defects / non-conformance before commencement

• Proper handling and usage of inspection devices and production machines/equipment

• Ensure job piece set-up and machining operation is in accordance with Routing Sheet and drawings

• Constant check on machining process and carry out in-process inspection to control the dimension according to customer requirements

• Maintenance and account for the inspection devices and tools issued for use

Requirements

• NTC 2 or 3 in Precision Engineering or equivalent

• Minimum 2 years of relevant experience

• Able to operate Fanuc Controller

• Experience in the machine applied for will be an added advantage

• Trainee positions available for interested parties without experience

• Able to read & interpret technical drawings

• Capable of using measuring instruments - Micrometre, Bore Gauge, Profile Projector

· Must be able to work night shift and split shift

· Must be able to work extra hours or weekend if needed

Occupation: Inspection Technician

Salary : $1,600 to $2,300

Allowances : $11/day, $22/night

Working hours:

• 12 hour shifts
• Rotate day/night shift every month
• 4334 shift schedule - 4 days work, 3 days rest. 3 days work, 4 days rest

Work place: Tampines

Inspection Technician Singapore Headquarters | Contract | On-site company’ primary focus is on the development of optical and extreme ultraviolet (EUV) photomask blanks, which are critical components in the manufacturing process of the latest-generation chips used in various applications such as artificial intelligence, high-performance computing, and 5G. The company also manufactures a range of photomask blanks used in the production of chips for various applications such as memory, logic, and power devices.

Life at company strives to create innovations for a better future for people.

At company, we are dedicated to innovation in the information technology segment, envisioning a world where all can thrive in harmony with nature. Our people are guided by our mission along with principles of commitment and innovation, influence every decision and action we take. We prioritize environmental protection, safety, and human rights, fostering diversity, inclusion, and employee wellbeing.

Be Empowered to Innovate and Develop for a Better Tomorrow with Us

• Experience an empowering and inclusive workplace that fuels your growth and development.

• Unlock your potential with abundant opportunities for skill-building and career advancement.

• Thrive in an environment that supports work-life balance and values your well-being.

• Receive fair and competitive rewards – your success is our success.

• We believe in recognizing excellence and celebrating your contributions.

Get to Know the Role

The position involves offering engineering, production, and application support for inspection equipment, covering operation, troubleshooting, maintenance, installation, and upgrades. Responsibilities include providing first level and front-end support to ensure reliable tools operations and efficient trouble recovery. Routine checks are performed to monitor equipment operating parameters, with prompt updates onto monitoring systems to maintain operations within control specifications. Additionally, the role includes troubleshooting, quick equipment breakdown recovery, and conducting corrective/preventive maintenance, as well as participating in upgrading, modification, or improvement work as needed.

Essential Responsibilities

• Assist in engineering, production, and application support for inspection equipment regarding operation, troubleshooting, maintenance, installation or upgrading.

• Provide first level and front-end support to maintain reliable tools operations and trouble recovery.

• Conduct routine checks to monitor equipment parameters, prompt updating onto monitoring system to ensure operations are within control specifications.

• Troubleshoot and resolve equipment breakdowns, carry out corrective/preventive maintenance, upgrading, modification or improvement work.

• Any ad hoc duties assigned by supervisor/manager.

Skills and Competencies Profile

• Diploma/Degree in Engineering preferred, but not required.

• Relevant work experience preferred, but not required.

• Proficient and have experience Microsoft Word, Excel, and PowerPoint.

• Good conversational English skills to communicate and collaborate with colleagues.

Additional Information:

• This will be a 2 year contract position.

• Leave approvals for holiday seasons are subject to manpower requirements.

• OT days is subject to change depending on budget and operational needs.

Please contact 90608812

1. Candidate must possess at least a Professional Certificate, Diploma/Advanced/Higher/Graduate Diploma in Engineering (Electrical/Electronic), Engineering (Industrial), Others or equivalent.
2. Required language(s): Preferably English and Mandarin spoken.
3. At least 6 Year(s) of working experience in the related field is required for this position.
4. Preferably specialist in Engineering - Electrical or equivalent.
5. Must have knowledge in Instruments and Electrical System for Process Control Environment
6. Knowledge and understanding of SCADA, DCS System, PLC, Instrumentation, Field Devices.

Job Scope:

1) Maintenance of Field Instruments for multiple Process Plants.

2) Troubleshooting and problem solving for field Instruments.

3) Calibration and commissioning of field Instruments.

4) Electrical equipment troubleshooting and general maintenance for the process plant.

Position: Service Technician

Responsibilities:

1. Service & Maintenance of fitness equipment

2. Repair & Trouble-shooting service

3. Assembling & Dismantling of fitness equipment

4. Handle warranty claim & parts ordering

Requirements:

1. Minimum Nitec / Higher Nitec in Mechanical engineering related discipline. Electronics and electrical knowledge or experience preferred.

2. 3-5 years of working experience, fitness industry experience is bonus.

3. Possess class 2B and/or class 3 driving licence and own transport preferred.

4. Initiative and willing to learn.

5. Experience in customer relationship management.

6. Dedication to providing great customer service.

Salary Package:

$2200-2700 (Basic Salary+ Monthly transportation allowance + Incentive)

Equipped with company mobile phone

Medical Claim

Free light refreshment & drinks in company pantry area

Free Parking

Annual Company trip (Oversea)

Annual wage supplement and annual bonus

Mars Veterinary Health (MVH) is a global leading provider of high-quality, advanced veterinary care for companion animals. Our business offers a wide range of high-quality medical services covering preventive and basic health care as well as advanced diagnostics, internal medicine, intensive care, surgery and orthopaedics. MVH also provides rehabilitation, physiotherapy, dietary advice and offers selected pet food, pharmaceutical and care products.

Working together to improve the lives of veterinary professionals, pets and clients.

Our vacancies are at VES Hospital, Mount Pleasant Veterinary Group (of clinics), Hillside Veterinary Surgery and Gentle Oak Veterinary Cinic.

We invite you to join us as Veterinary Technician if you like to work with a team of passionate individuals seeking to provide exceptional care to pets in a challenging and dynamic environment.

Do you have:

• Graduate(d) with Diploma in Veterinary Technology or relevant education.
• Minimally 2 years work experience in veterinary clinic or hospital preferred.
• Could commit to 44 hours work week based on rotation inclusive of weekends.
• Want to grow a career in veterinary industry.

Responsibilities:

• Lead communications with veterinarians and veterinary medical team to maintain the flow of pets.
• Provide professional, efficient and exceptional service at all times.
• Obtain relevant information and history from clients to maintain proper and complete medical charts.
• Ensure the safety of pets, clients and associates by utilizing safe restraining techniques, following standard protocols while maintaining clean, sterile and organized treatment areas, exams rooms and labs.
• Educate clients about preventive care, pet health needs, any diagnosis or treatment, hospital services and other related matters.
• Assist with surgery as applicable.
• Do note that only shortlisted candidates will be notified.

Occupation: Development Technician

Salary: $1,600 to $2,300

Allowance - $11/day, $22/night

Working hours:

• 12 hour shifts
• Rotate day/night shift every month
• 4334 shift schedule - 4 days work, 3 days rest. 3 days work, 4 days rest

Work place: Tampines

Company primary focus is on the development of optical and extreme ultraviolet (EUV) photomask blanks, which are critical components in the manufacturing process of the latest-generation chips used in various applications such as artificial intelligence, high-performance computing, and 5G. The company also manufactures a range of photomask blanks used in the production of chips for various applications such as memory, logic, and power devices.

Life at company strives to create innovations for a better future for people. At company, we are dedicated to innovation in the information technology segment, envisioning a world where all can thrive in harmony with nature. Our people are guided by our mission along with principles of commitment and innovation, influence every decision and action we take. We prioritize environmental protection, safety, and human rights, fostering diversity, inclusion, and employee wellbeing.

Be Empowered to Innovate and Develop for a Better Tomorrow with Us

• Experience an empowering and inclusive workplace that fuels your growth and development.

• Unlock your potential with abundant opportunities for skill-building and career advancement.

• Thrive in an environment that supports work-life balance and values your well-being.

• Receive fair and competitive rewards – your success is our success.

• We believe in recognizing excellence and celebrating your contributions.

Get to Know the Role

As a Development Technician, you will play a role in supporting engineering activities and ensuring product quality during the manufacturing process. Your responsibilities include assisting engineers in troubleshooting, conducting experiments, and compiling data for analysis. Effective communication across departments is essential, as you will collaborate closely in a team. Your role requires flexibility, as you will update daily statuses, adapt to changing priorities, and complete various tasks as assigned.

Essential Responsibilities:

• Assist engineer on supporting engineering activities for product development

• Assist in troubleshooting and problem solving in the manufacturing line to ensure product quality and high yield

• Assist engineers to conduct experiments and data compilation

• Effective communication to liaison with different departments

• Work in a team environment

• Able to summarize and update Skills and Competencies Profile

• Minimum NITEC / Diploma in Mechanical Engineering or Electrical Technology

• Strong communication skills for reporting and collaborating with colleagues

• Willingness to learn and adapt to new cleaning machine technologies and procedures

• Willing to work in 12-hour rotating shift (4 working day/3 rest day/3 working day/ 4 rest day)

• Basic MS Office skills

• Proactive team player

Please contact 90608812

Responsibilities:

• Install and assemble components into sub-assemblies.
• Integrate the assemblies or components to ensure functionality.
• Align and calibrate mechanical components to achieve functionality.
• Perform coiling of the FCVA filters.
• Fabricate, size, install, and integrate gas, cooling water, and vacuum piping into the machine.
• Conduct vacuum and water leak checks.
• Disassemble and pack the machine.
• Perform additional component steps, such as polishing, filling, and sanding to achieve the required fit.

Requirements:

• "O" Level/Higher Nitec or equivalent in Mechanical, Mechatronics, or Engineering-related fields.
• Proven experience in assembly, integration, and calibration of mechanical components.
• Proficiency in mechanical assembly and sub-assembly processes.
• Experience with gas, cooling water, and vacuum piping fabrication and installation.
• Familiarity with vacuum and water leak testing procedures.
• Ability to perform polishing, filling, and sanding for component fitting.
• Ability to work in a hands-on manufacturing environment.
• Comfortable with occasional heavy lifting and machine disassembly/packing tasks.
• Adhere to safety protocols and quality standards.

• Operate CNC machine/s to perform tasks
• Understand specifications of the task at hand and the desired result
• Prepare and load raw materials and parts onto the machines
• Prepare a test run to check if the machines produce outputs according to specifications
• Set machines to complete full cycles to fabricate large number of parts
• Supervise the machines while they execute the tasks and make any necessary adjustments to produce a better result
• Inspect and measure finished products and compare them with requirements to determine if the process has been completed properly
• Check and maintain and upkeep machinery daily to ensure functionality

Requirements

• At least 5 yrs experience in CNC operating
• Skill in operating CNC machinery and tooling as well as precision measurement tools
• Ability to read and interpret mechanical documents and drawings
• Computer savvy with basic understanding of computer programming and CAD/CAM
• Mechanical aptitude and good math skills
• A keen eye for detail and results-driven approach
• Good communication abilities
• Willing to work night shift and split shift
• Willing to work OT on public holiday and weekend
• · Must be able to work night shift and split shift
• · Must be able to work extra hours or weekend if needed

Job Summary

We are seeking a detail-oriented and skilled Production Technician to join our team. The ideal candidate will play a critical role in the assembly, subassembly, testing, and troubleshooting of robotic systems. They will ensure all production activities adhere to safety, quality standards, and work efficiently while contributing to continuous improvement initiatives.

Key Responsibilities

• Follow safety protocols, report hazards, and participate in safety initiatives.
• Inspect components and assemblies to meet quality standards and customer requirements.
• Assemble and test mechanical, electrical, and electronic components based on technical instructions.
• Perform wiring, soldering, and cable management, ensuring high-quality connections.
• Calibrate and test robotic systems and components to meet performance standards.
• Identify and resolve basic mechanical, electrical, or software issues during assembly and testing.
• Maintain accurate records of processes, test results, and modifications.
• Manage inventory levels, report shortages, and ensure tools and equipment are well-maintained and calibrated.
• Maintain an organized and efficient workspace by following 5S principles.
• Collaborate with engineers and cross-functional teams to improve processes and resolve challenges.
• Stay updated on new techniques, tools, and technologies.
• Support lean manufacturing, Kaizen, and other improvement initiatives.

Qualifications

• Education: Diploma in Mechanical, Electrical, Electronics, or Mechatronics Engineering, or a related field.
• Experience: 1 year experience in a production or assembly environment, preferably in robotics or a related industry.

Skills:

• Proficiency in mechanical and electrical assembly.
• Strong wiring, soldering, and cable management skills.
• Ability to read and interpret technical drawings, wiring diagrams, and work instructions.
• Basic troubleshooting of mechanical, electrical, and software issues.
• Familiarity with 5S and lean manufacturing principles.

Additional Requirements:

• Excellent attention to detail.
• Strong problem-solving and organizational skills.
• Ability to work collaboratively in a fast-paced environment.

Ability to read drawings

~ Follow amd emforce strict safety regulations

~ Assemble and perform welding processes

~ Monitor welding performance and quality issues

~ Troubleshoot welding related problems

~ Maintain equipment in a condion that does not compromise safety

~Responsible for assembling and testing manufactured goods

~ Must be problem solver and analytical thinker

Founded in 1996, Huabao Flavours & Fragrances Co., Ltd. is the largest Flavour & Fragrance house in China, engaged in the research & development, production, sales and services of tobacco flavors, food flavours, fragrances and food ingredients.

Our company in Singapore - Huabao Asia Pacific Pte Ltd, is currently looking for a motivated and detail-oriented Lab Technician to join our team.

Key Responsibilities:

1. Assist flavorist in organizing and cataloging flavor raw materials.
2. Prepare simple flavor formulations by blending flavor base ingredients.
3. Collaborate with flavorist to perform sensory evaluations of flavor samples.
4. Operate and maintain routine laboratory equipment to ensure it is in good working condition.
5. Maintain cleanliness and orderliness in the laboratory environment, ensuring compliance with safety and hygiene standards.
6. Assist with laboratory documentation, including recording experiment results, observations, and inventory management.
7. Support the team in carrying out any other tasks required in the flavor development process.
8. Communicate smoothly with the China headquarters to ensure accurate and efficient information exchange.

Qualifications and Skills:

• 2 years experiences in the flavor or food industry, familiarity with GC-MS instrumentation and software is preferred.
• Knowledge of basic laboratory equipment and flavor raw materials.
• Strong attention to detail and ability to work with precision.
• Good communication skills and ability to work effectively within a team.
• Fluent in Chinese, need to communicate effectively with the China headquarters.
• Ability to multitask and manage time efficiently.
• Familiarity with laboratory safety and hygiene standards.

If you have a passion for flavor creation and are eager to work alongside experienced flavorist, we encourage you to apply for this exciting opportunity.

Boiler Technician

for Operation of Industrial Power Plant

We are:

Engineering company specialized in Steam Boilers and Combustion Systems. We have engagement for Operation and Maintenance of Industrial Power Plant with Steam Generation.

Work Scope:

• Supervise operation of Gas Turbine for Power Generation and Waste Heat Steam Boiler.

• Join our team of Technicians for 24 hours operation of the power plant.

• Work will be in 12 hours shift from 8 to 8

• Operation of the plant as per Standard Operation Procedures.

• Perform inspections as per check list.

• Report of any abnormalities to the plant manager.

• Participate in preventive maintenance

• Recording of the plant performance parameters and daily activities.

Work Place:

• Within Tuas Medical Park

Requirements:

• Class 1 or 2 Boiler Attendant Certificate of Competency

• If experience in boiler operation and interested in obtaining Boiler Attendant Certificate.

• Technical competency

• Diploma in Mechanical / Electrical Engineering

• Experience of operation / maintenance of machinery and technical installations.

• Able to work independently

Employment Terms:

• Salary range SGD 4,000.- to 5,000.- based on experience / qualifications.

• Annual Performance Bonus

• Transport allowance

• Overtime allowance

• We will provide on-job training.

Duty technician for the Semicon Manufacturer Facility system

1. Diploma in Electrical or Mechanical

2. There are two shift, day shift (8:30AM to 8:30PM), night shift (8:30PM to 8:30AM)

working two days and rest two days

3. We will provide on site training

4. Good communication, interpersonal skills and responsibility

Responsibilities:

1. Provide professional and high-quality nail services to clients, including but not limited to nail care, painting, tips, extensions, etc.

2. Design and recommend suitable nail styles based on client needs and fashion trends.

3. Maintain a clean and hygienic work area, ensuring all tools and materials used meet hygiene standards.

4. Maintain good communication with clients to ensure their satisfaction and willingness to return.

5. Continuously learn and master new nail techniques and fashion trends to enhance personal skills and professional level.

6. Promote and sell nail care products

7. Schedule client appointments and accept payments

8. Other duties as and when assigned

Requirements

1. Proficient in various nail techniques, including tips, extensions, carving, etc.

2. Possess good communication skills and a strong customer service mindset.

3. Be responsible, attentive to detail, and able to work independently.

4. Be able to adapt to a fast-paced work environment and have a teamwork spirit.

· Flexibility to work evenings, weekends, and holidays as needed.

We thank you for your interest and we regret that only shortlisted candidates will be notified. All resumes received will be used for recruitment purposes only.

EA License ID: 18C9520

EA Registration ID: R1765753

• Operate CNC machine/s to perform tasks
• Understand specifications of the task at hand and the desired result
• Prepare and load raw materials and parts onto the machines
• Prepare a test run to check if the machines produce outputs according to specifications
• Set machines to complete full cycles to fabricate large number of parts
• Supervise the machines while they execute the tasks and make any necessary adjustments to produce a better result
• Inspect and measure finished products and compare them with requirements to determine if the process has been completed properly
• Check and maintain and upkeep machinery daily to ensure functionality

Requirements

• At least 5 yrs experience in CNC operating
• Skill in operating CNC machinery and tooling as well as precision measurement tools
• Ability to read and interpret mechanical documents and drawings
• Computer savvy with basic understanding of computer programming and CAD/CAM
• Mechanical aptitude and good math skills
• A keen eye for detail and results-driven approach
• Good communication abilities
• Willing to work night shift and split shift
• Willing to work OT on public holiday and weekend
• · Must be able to work night shift and split shift
• · Must be able to work extra hours or weekend if needed

Oil and Gas U.S.A. equipment manufacturer's representative located in Paya Lebar area looking for a Trainee Service Technician.

5 day week (Monday - Friday), 8.30am to 5pm

$3,000 / month

Minimum Polytechnic Diploma preferably in Mechanical Engineering with good command of English.

Only Singaporeans.

Candidate must possess at least a Professional Certificate, Diploma/Advanced/Higher/Graduate Diploma in Engineering (Electrical/Electronic), Engineering (Industrial), Others or equivalent.

Required language(s): Preferably English and Mandarin spoken.

At least 6 Year(s) of working experience in the related field is required for this position.

Preferably specialist in Engineering - Electrical or equivalent.

Must have knowledge in Instruments and Electrical System for Process Control Environment

Knowledge and understanding of SCADA, DCS System, PLC, Instrumentation, Field Devices.

Job Scope:

1) Maintenance of Field Instruments for multiple Process Plants

2) Troubleshooting and problem solving for field Instruments

3) Calibration and commissioning of field Instruments

4) Electrical equipment troubleshooting and general maintenance for the process plant

STARBOWL AT HOMETEAMNS

Roles & Responsibilities

BOWLING TECHNICIAN

(Location : 2 Bukit Batok West Avenue 7, #03-02, Singapore 659003, Nearest MRT : Bukit Gombak)

As a Bowling Technician, you will report to our Bowling Supervisor

What you’ll be doing:

• To ensure smooth operations of the Bowling alley
• Breakdown repair & trouble-shoot on Bowling machineries
• Perform electrical and mechanical installation work
• Perform inspection, routine preventive maintenance to ensure all Bowling related equipment operate efficiently
• Maintain lanes according to the maintenance schedule to ensure the best possible player experience
• Comply to safety regulator and perform other ad-hoc duties when assigned

We want you, if you have/are:

• Min. NITEC in Electrical or Mechanical Engineering or equivalent with min. 3 years of relevant working experience
• Good knowledge in electrical troubleshooting on faults and failures
• Good personality and learning attitude
• Must be physically fit as carrying heavy equipment/items are needed
• Able to work shifts, weekends and public holidays

Starting salary will commensurate with qualifications and relevant work experience. We regret that only shortlisted candidates will be notified. Interested applicants please send an email to '[email protected]'' or at Starbowl reception with your resume, last drawn and expected salary.