Reporting to Shift Supervisor, this position will execute and maintain manufacturing process operations by physically performing the task of process control, equipment monitoring and in-process analysis to ensure the production process strictly follows company safety standards and environmental regulations and product quality is within customer's requirement.

Responsibilities:

• Support Shift Supervisor in handling plant start-up, shutdown manufacturing process according to established procedures
• Support production activities such as in-process quality testing, catalyst preparation, equipment preparation for maintenance, loading & unloading of process solvents
• Perform all routine task required to maintain manufacturing process such as monitor process parameters, plant patrolling, data logging and housekeeping
• Perform safe work practices through following safety regulations and supporting safety programs
• Ensure safe working conditions through taking corrective actions to maintain equipment and process condition within safe operating limits
• Perform company emergency response in areas of firefighting, rescue and loss containment
• Maintain plant safety equipment through routine checks
• Execute predictive maintenance to identify and prepare equipment for maintenance before breakdown
• Prepare or update standard operating procedures based on acquired experience and new technical know-how

Requirements:

• Diploma in Chemical Engineering or Chemical and Pharmaceutical Technology, NITEC in Chemical Process Technology or Higher NITEC in Chemical Technology or a related discipline with at least 4 years of relevant experience
• Entry level candidates without experience are welcome to apply
• Knowledge in Distributed Control System will be advantageous
• Effective team player with good communication skills and high self-motivation
• Able to perform rotating shift work
• Able to perform overtime work when required
• Willing to work in Jurong Island

Reporting to the Technical Officer and Senior Maintenance Supervisor, this role is responsible for preserving the good condition and functionality of the school premise. This includes maintenance and repair of electrical, plumbing, ventilation works and other building systems.

Responsibilities:

• Survey buildings and repair mechanical systems to ensure consistency with health and safety standards.
• Check work orders via the ticketing system daily and take on assigned work activities accordingly. This includes setting up and tearing down of events location.
• Ensure scheduled inspections, maintenance and repair work are conducted regularly and properly recorded. This includes the buildings (e.g. landscaping, painting, carpentry, pest control etc), equipments, electrical systems (e.g. replacing light bulbs/sockets, cleaning and repairing circuit breaker panels etc), alarm systems (e.g. fire and protection), plumbing systems and manual repairs (e.g. fixing of locks, replacing of windows etc).
• Maintain the air conditioning and plumbing systems to ensure functionality.
• Ensure emergency repairs are attended to promptly and efficiently.
• Maintain the inventory (e.g. tools and materials) in a tidy and appropriate manner.
• Undertake any other duties as assigned by the Senior Maintenance Supervisor and/or Technical Officer.

Requirements:

• Nitec in Engineering or equivalent
• Minimum 2 years’ experience working in maintenance
• Good knowledge in general maintenance processes and methods
• Basic understanding of electrical, hydraulic and other systems
• Able to carry load of up to 25kg.

Please note that only shortlisted candidates will be contacted.

Summary of Job Scope:

To work closely with Microbiologist, Production, QC personnel and QA department to ensure all apparatus and end products are safe and free from any contamination.

• Perform QC checking, sampling and routine analysis of in-coming raw material.

• Operation of High Performance Liquid Chromatography (HPLC) and laboratory analytical instrument.

• Perform sampling, routine checking and recording of packaging material and printed packaging material (Label, leaflet, unit box, tube).

• Carry out sampling and testing for daily purified water system monitoring.

• Maintain and record retained sample of raw material.

• Maintaining and recording the temperature and room humidity in equipment room.

• On line checking and recording of in-process granules and tablet

• Checking and recording of in-process syrup, cream.

• Checking and approval of packing process.

• Daily stock card update for working standard.

• Perform identification test for in-coming raw material.

• Routine analysis and recording of raw material, intermediates and finished product.

• Carry out stability testing.

• Carry out dissolution profile test and monitoring.

• Carry out Analytical method validation.

• Carry out calibration/ performance verification of laboratory equipment/ Apparatus.

• Quality Control check on raw material dispensing.

• Ensure coding of labels and bar code labels are complete & accurate.

• Preparation and recording of reagents and chemicals.

• Preform analysis and support for working standard preparation.

• Maintain tidiness and cleanliness of laboratory equipment and workplace.

• Practice Good Laboratory Practice (GLP) and laboratory safety.

• Maintain QC document in laboratory to ensure up to date and accurate.

• Update laboratory equipment log book / Quality Control (QC) record book and all other QC documents.

Requirements:

• Diploma/ Degree in Chemistry or related field
• Able to perform independently in a fast paced environment
• Able to perform multi-task as assigned by superior
• No prior experience required (Fresh grads are welcome to apply)
• Must be able commit to OT and Night Shift (when necessary)

Responsibilities:

• Executing electrical preventive maintenance to maintain and sustain the food production equipment, facilities and electrical system.
• Supporting Engineers in setting up of the new equipment & systems and transfer equipment for new projects.
• Troubleshooting, maintaining and repairing equipment and electrical / electronic systems.
• Preventing fire and ensuring safety of personnel and equipment and preventing any incidents and accidents from possible electrical hazards.
• Implementing projects to improve energy efficiency for all of systems.
• Maintaining proper records for works of repairs, maintenances and projects.
• Exhibiting good work discipline and housekeeping habits, and adhering to all safety regulation and house rules at all times.

Pre-requisites:

• Minimum NiTEC in Electrical Engineering or related fields.
• Experience in manufacturing environment with handling machine repair and troubleshooting inclusive of preventive maintenance.
• Salary will commensurate with qualifications and experience.

Job Description:

• Prepare and operate CNC machine tools to perform drilling, milling and other tasks.
• Able to understand the specifications and expected results of the task at hand by reading design drawings, mechanical drawings, etc.
• Translate instructions into computational commands so that the machine can perform the correct function.
• To supervise and monitor when the machine is performing task and able to make necessary adjustments to produce better results.
• Have experience in operatingt a milling machine.

Skills:

• Know Mastercam CNC machining programming software system/G-code.
• Able to read and understand mechanical documents and drawings, such as 2D/3D.
• Must have a basic understanding of computer programming.

Requirements:

• Qualification: ITE/NITEC
• Minimum 2 years of relevant experience
• Bilingual in English and Chinese

• ITE in Mechanical Engineering or equivalent
• Good technical Knowledge on Mechanical or Electrical and Instrumentation
• Hands-On experience on Pumps (Centrifugal, gear pumps, etc.) and Motors
• Customer service oriented
• Independent and proficient in basic writing skills
• Class 3 driving license is a plus
• Relevant working experience in pumps servicing/repair

Job Description & Requirements:

• PC / Notebook / AIO system diagnostic.
• Assist and advising customer the best solution for their repair / upgrade / customization.
• Handling of hardware and software installation.
• Training will be provided.
• Basic Salary + High Commission + Variable Performance Bonus
• 5 days/6 days work week
• Medical Benefits
• Staff Purchase Discounts

• Engage in the installation, repair and maintenance of various technology-based equipment.
• Conduct regular checks and troubleshooting to ensure the technical equipment operates at its optimal performance.
• Provide on-site assistance with hardware and software use and address and resolve technical issues faced by clients or customers.
• Carry out diagnostic tests and analyses to identify the roots of technical issues.
• Liaise with team members and communicate with stakeholders in layman's terms to assess needs and system requirements.
• Record and document instances of hardware failure, repair, installation and removal.
• Stay up to date with technical developments and advancements in allied fields.

Requirements

• working hours : 7:30am - 5:15pm (5.5 days)
• Nitec in Mechanical/Mechatronics

Job Description:

1. Carry out maintenance, repair and overhaul work on heavy vehicles, has diagnostic capability and able to perform major repair on engine and transmission

2. Ensure high standard of workmanship and minimize turnaround time for scheduled repairs and inspections to meet workshop’s service standards and according to job order.

3. Notify Team Leader of unusual repair problems which will require major repair and replacement parts recommendation.

4. Complete work order for each vehicle and unit serviced.

5. Adhere to defined guidelines in regards to safety, orderliness and etc.

6. Performs ad hoc duties as assigned by Superiors

Job Requirements:

1. Academic qualification: NTC 2 / Diploma Automotive Technology or equivalent

2. Competent in basic English (verbal & written)

3. Prefers candidates with at least class 3 driving license

4. Prior experience of at least 2 to 3 years in performing automotive service repair (commercial vehicle)

The job scope includes:

• Support laboratory operations by maintaining cleanliness, organization, and functionality of laboratory equipment and workspaces.
• Assist in conducting experiments, tests, and analyses under the supervision of laboratory staff.
• Procure laboratory supplies, equipment, and materials in accordance with project requirements and budgetary guidelines.
• Coordinate with vendors and suppliers to obtain competitive pricing and ensure timely delivery of procurement orders.
• Maintain accurate records of inventory levels, procurement transactions, and supplier information using designated software or systems.
• Assist in the development and implementation of procurement strategies to optimize cost-effectiveness and efficiency.
• Collaborate with laboratory personnel and project teams to identify procurement needs and recommend suitable products or solutions.
• Monitor and track the usage of laboratory consumables to prevent stockouts and minimize wastage.
• Adhere to safety protocols and guidelines while handling hazardous materials and operating laboratory equipment.
• Assist in other laboratory-related tasks and projects as assigned by supervisors or management

COMPETENCIES AND QUALIFICATION REQUIREMENTS

• Candidate must possess at least a Secondary School/Professional Certificate/NITEC, Diploma, Advanced/Higher/Graduate Diploma/Degree, any field.
• At least 1 year(s) of working experience in the related field is required for this position.
• Preferably Junior Executives or fresh graduate.
• Good communication skills and able to communicate with suppliers and internal department well.
• Excellent negotiation skills for best material/equipment/service pricing and payment terms from suppliers.
• Be driven, responsible, organized, independent and able to handle stress well.
• Able to learn fast, high attention to detail, and able to multi-task
• Basic Skills required: Proficient in Microsoft Office applications and multilingual skills (English & Mandarin)
• Possess positive working attitude, punctual, initiative and able to work productively under minimal supervision.
• Able to work under pressure and minimum supervision.
• Able to start immediately or at short notice is a plus.
• Able to work from 1:00pm - 10:00pm

ABRIDGED VERSION OF JOB DESCRIPTION AND REQUIREMENTS

We are looking for a focused and highly motivated individual to contribute to a dynamic and growing team. This team focuses on the fabrication of next-generation photovoltaic technology in our flagship project.

We regret that only shortlisted candidates will be notified.

Job scope:

• Perform daily production activities including process monitoring and field checks
• Operate all production chemical processing equipment (ie pumps, boilers, DCS, etc)
• Maintain and record accurately in production documents (eg Work Order)
• Assist Production Supervisor to perform field work in order to meet production schedule
• Attend and contribute for production training matters
• Participate and respond to the certified emergency response team

Beneficial:

• Forklift, work-at-height, confined space, firefighting and hazmat

Requirements:

• Willing to work in shifts (8am to 4.30pm OR 1.30pm to 10pm)

Benefits:

• 5 days work week
• Shift allowances

Roles & Responsibilities

Technician Responsibilities:

• Inspecting, analyzing, and troubleshooting systems and equipment.
• Carry out troubleshooting and minor repairs to building works and M&E works including air-conditioning, electrical, plumbing and fire protection system.
• Involved in coordination and supervisor of construction works
• Responsible for planning, managing and ensuring smooth implementation and monitoring of projects assigned
• Responsible for effective site management which include safety inspection and quality control of materials and plants on site
• Required to plan, lead and monitor progress and performance against the project plan whilst managing the day-to-day operational aspects of projects which includes manpower planning, construction progress monitoring, preparation of master schedule and cost control.

Technician Requirements:

• Any Degree
• Experience as a technician.
• Ability to multitask and liaise with professionals in different fields.
• Ability to explain problems simply and clearly.
• Proficiency in MS Office.
• Ability to understand verbal and written instructions.
• Ability to follow health and safety regulations.
• Excellent mathematical and problem-solving skills.

Position Overview

The candidate will assist the Maintenance Supervisor to conduct preventive maintenance, troubleshooting & repair of CNC machines and update maintenance records regularly.

Job Responsiblities

• Preventive maintenance and calibration of the machines according to the checklist
• Analyse machine problems and repair
• Update and maintain maintenance records and forms regularly
• Any other ad-hoc maintenance activities such as maintaining coolant and lubrication of machines
• Perform other duties and responsibilities, as assigned.

Position Requirements

• Minimum 3 years of hands-on experience in maintenance and repair of CNC metal cutting machines
• Good knowledge in Electrical and Mechanical aspects of CNC Machines
• Able to read the PLC

JOB RESPONSIBILITIES

· Follow standard operating procedures (SOPs) to accurately prepare, dispense pharmaceutical raw materials and ingredients in the correct quantities.

· Record and document manufacturing data, including dispensing data, logbook, cleaning record and other relevant information.

· Perform daily cleaning of the dispensing room, including surfaces, equipment, and storage areas, following established cleaning procedures SOP and protocols. Ensure that all workspaces are kept clean and organized to maintain a ISO clean room class 8 environment for pharmaceutical processes.

· Monitor and maintain dispensing device performance to ensure proper functioning and calibration.

· Adhere to safety protocols and procedures to protect yourself and others in the dispensing environment.

· Work collaboratively with other team members to ensure smooth and efficient operations.

· Report any issues, deviations, or incidents to supervisors or relevant personnel for prompt resolution.

· Participate in training programs and Adhere to Good Manufacturing Practices (GMP) guidelines and regulations related to cleaning and dispensing in pharmaceutical manufacturing.

·To carry out any other duties assigned by your immediate superior.

Preventive system maintenance

- Hydraulic/Mechanical/Electrical support (Setting up, troubleshooting, repairs and construct)

- Support R&D activities to develop, fabricate and build/upgrade new/existing ROVs

- Support data recording activities on jobs

- System launch and recovery

- Ability to work outdoors on-board ships, possess a level of physical fitness appropriate to the job requirements, and able to work irregular shifts hours (when required) based on operations schedules.

- To assist with ROV operations as instructed and in accordance with approved procedures and policies.

- To perform remote vehicle and possess positive, hands-on systems maintenance, electrical, mechanical and hydraulic repair of the ROV and various ancillary systems

The Role: To carry out a plan preventive maintenance work and corrective action in hospital, medical centre, clinics and other associated business unit, and where the scope of work covering the building services, mechanical, electrical, facilities equipment and other associated building maintenance work.

Key Accountabilities:

• To perform a plan preventive maintenance work (PPM) as assigned by supervisor
• Capable in leading a team of technicians in the absence of the Supervisor
• Capable of trouble shooting electrical fault, reinstate power supply and provide recommendation to prevent recurrence
• Capable of trouble shooting air-conditioning fault, reinstate air-conditioning system back to normal and provide recommendation to prevent recurrence
• Capable of repairing burst water pipe, mechanical work, medical gas system and other related facilities equipment.
• To certify all work completed by vendors / contractors

Qualifications and Experience:

• Minimum Qualification: NTC 2 or Higher NITEC and above, or equivalent.
• Minimum 5 years working experiences in M&E works and related field associated to building services.

Skills & Knowledge

• Mechanical & Electrical
• Building Services
• Air conditioning
• Blue Print Drawing

Other Requirements:

A good personality that is able to communicate confidently with patient, doctor & other stakeholders in responding to query, feedback or complaint related to plant operations matter and hospital operations.

Working hours:

Day Shift:

• 4 days - 0830hrs to 1800hrs
• 1 day- 0830hrs to 1730hrs

Night Shift

• 4 days - 2200hrs to 0730hrs
• 1 day - 2200hrs to 0700hrs

5-day work week on rostered basis to work on weekdays, weekends and PH, Max 42 hours.

This role offers the opportunity to specialize in specific equipment beyond standard operations, encompassing maintenance and process improvement. These functions are fundamental to our success in R&D and product development.

Job Description

· Training and Specialization: Training provided to specialize in measurement methodology, equipment and result-reading. High quality measurement result is the essential foundation to our success in R&D and product development.

· Hands-On Role: On the job training and operating metrology equipment including:

◦ Step Profiler

◦ EL/PL machine

◦ Vision inspection tool

◦ Sheet resistance

· Maintenance and Compliance: Conduct preventive and corrective works on the listed equipment, ensuring compliance to relevant standards and procedures.

· Process Improvement: Act as an essential team member by actively contributing to the enhancement of measurement processes.

Requirements

· Diploma in Engineering.

· Able to work on-site at Singapore-west.

· Able to speak, write, read in English.

Job Summary:

The candidate will be performing lab experiments on variable water chemistries, analyze water quality parameters and run membrane reverse osmosis skids to evaluate membrane performance. The job will also require evaluation and characterization of chemical recipes, and performance validation via a set of lab standard protocols (preliminary on-the-job training will be provided).

Essential Duties & Responsibilities:

1. Design of experiment:

• Evaluate the efficacy of developed formulations/products for various scales following lab protocols.
• Plan antiscalant experiments using membrane flow-cell (with synthetic and real process water solutions).

2. Performing the experiment:

• Carry out the experiment with good lab practices and housekeeping.
• Troubleshoot experimental failures, identify and propose solutions to overcome the failures.

3. Data Analysis:

• Identify patterns and/or correlations from the experimental data.
• Analyze the data and provide recommendations for improvements.

Skills/Experience/Education Required:

• Technical background, diploma/degree in Chemistry/Chemistry Engineering/Environmental Engineering
• Experience in water chemistry or water testing would be a plus.

Job Specifics:

• Ability to work with high energy in a start-up-based environment and multitask, if required.
• Exceptional communication and presentation skills to convey ideas and technical information effectively across an entire range of audiences.
• Curiosity and strong drive to improve status-quo while working in a semi-autonomous environment.

The role will be based in Tuas.

Responsibilities:

• electrical maintenance, troubleshooting and repair of Pilot Plant and laboratory equipment.
• day-to-day operations, the general housekeeping and the proper preventive maintenance, repair and troubleshooting of Pilot Plant equipment in Singapore Pilot Plant facilities and R&D laboratory.
• proper execution of Pilot Plant trials/laboratory activities including all the preparatory and setting-up activities up, close-out activities and the turn-over of product samples and the storing of Pilot Batch records.
• Provide support to Project Teams when required such as the physical testing of raw materials and finished products, the receiving and sending samples and such other requests.

Requirements:

• ITE graduate or Polytechnic graduate with Diploma in the relevant field of Engineering - Electrical, Mechatronics and/or Automation.
• Must be physically fit and willing to work long hours in executing Laboratory and Pilot Plant trials.
• Preferably with experience in operating, maintaining and doing actual troubleshooting on wet process and pilot scale spray drying equipment including packaging test equipment would be an advantage.

Job Description

1. Perform hands-on Structure installation, Service & Maintenance and Repairs of Equipment / Instruments at outdoor field.

2. Perform instrument calibration, repair and maintenance services.

3. Prepare Service Report, PLan Service schedule

4. Involve in Ad-Hoc assignments as and when required

5. Willingness for Standby duties or work after office hour or during weekend and Public Holiday

Requirement:

1. Possess positive attitude to learn, has initiative and independent

2. Relevant educational qualifications in Marine/ Electrical / Mechanical / Structure Engineering (ITE/NITEC)

3. Willing to do field work (outdoor sites, onboard vessel /workboat, underground, canal, water coastal, etc.)

4. Team player

5. No prior experience may also be considered.

6. Self-driven and motivated individual with critical thinking skill

Interested applicants, please email detail resume to [email protected]

Regret to inform only shortlisted candidates will be notified

Job Description

- Troubleshooting photocopier hardware.

- Break-fix & Proactive Maintenance of photocopiers and printers.

- Software installation of printer drivers and scanners

- Programming WiFi router to connect laptop and printers.

- IT Support (remote and onsite) and customer service

- Onsite - Key operator training and troubleshooting

- Laptop, printer, copier and router setup.

- Delivery and setup of photocopier / printers

Requirements

- Min 2 year experience in similar field

- Network configuration experience

- Remote desktop support experience

- Work from Penjuru (West of Singapore)

- Training will be provided

Based in Tuas (Transport provided)

Successful candidates will be offered an initial 6-months contract, open to potential extension or conversion based on performance and business needs.

Company Benefits:

• 37.5 hour work week (additional hours is paid OT)
• $499 worth of annual vouchers to buy Coca Cola products
• 18 days annual leave
• Medical coverage + Dental - $400 / year
• Medical & Dental coverage for self AND dependents
• 2 way transportation for both shift timings from 18 pick-up points island-wide
• 5 days work week
• Rotating shift: Morning (7:30am – 4pm), Afternoon (3:30pm to Midnight)

Pacific Refreshments Pte Ltd (Coca-Cola Singapore) is a strategic concentrate manufacturing plant in Asia. We are an export facility, specializing in the manufacturing of concentrates and beverage bases, with a complex portfolio, supporting the ASEAN, South Pacific and Southwest Asia business units. We are on a journey of growth - having completed the construction and expansion of our site towards doubling our manufacturing capacity in recent years. We have also embarked on our digital transformation journey, striving to be the Lighthouse for the Consumer Products Supply (CPS) plants in Asia and to be a leader in digital transformation.

We champion a safety-first culture, dedicated to protecting our employees' well-being and fostering a secure workplace that values each individual.

Pacific Refreshments Pte Ltd is a winner of the ‘2020 HR Asia Best Companies to Work For’ Award.

Job Summary

The main function of this job is to generate maximum output of quality products through effective use of assigned resources and assets. To achieve this goal, this position has:

• technical skills in optimizing / maximizing production, yield and product quality
• implement and maintain quality systems, improvement projects and other initiatives.
• tasks in line operation (at least 3 different work stations)

Operation and performance

• Achieve line and batch efficiency and output requirements as targeted by superior / management.
• Maximize output by reducing downtime through monitoring and controlling changeover / maintenance / breakdown time.
• Produce the right quality by managing all CCPs and quantity according to the process order.
• Ensure proper product labelling, coding and other information accurately.
• Carry out the right cleaning, sanitation and GMP according to Quality System requirements.
• Proper handover before going on leave / changeover shift.
• Follow strictly safety and environment requirements at the workplace.

Improvement projects

• Support various initiatives by contributing idea, hands on experience, solutions and others.
• Assist to conduct trials, collect data and trouble shoot machines as and when it is necessary.
• Participate in root-cause analysis and corrective action development sessions as required.

Job Requirements:

• Preferable 1 - 2 years experience in food manufacturing company in similar position. Other manufacturing and electronics industries are welcome too.
• Good technical knowledge and skills in line operation and machine maintenance/repair.
• Nitec / Diploma in Engineering or related technical field.

Responsibilities:

• Analyse and diagnose vehicle defect
• Perform mechanical, pneumatic and electrical repair and overhaul maintenance services.
• Attend and provide recovery support to breakdown vehicles.
• Handle facilities and equipment maintenance.
• Any other ad-hoc tasks assigned by superior.
• Experience in EV

Requirements:

• Nitec / Higher Nitec / Diploma in Electrical / Mechanical / Automotive engineering / EV
• Experience in automotive working environment will be added advantage.
• Analytical and fault-finding skills.
• Process a class 3 and 4 driving license.
• Able to communicate and write in English.
• Service-oriented mindset.
• Prepared to be on 24 hours standby for emergency recovery support.

About No deviation

At No deviation, we are dedicated to delivering patient-centric solutions that revolutionize the pharmaceutical landscape. As a dynamic expert in engineering consultancy, Commissioning Qualification Validation (CQV), and Quality, Compliance, and Regulatory services, we are looking for individuals who are excited to contribute to impactful projects and drive innovation.

We believe that great things happen when Empathy, Integrity, and Transparency guide our actions. That's why we foster a culture of collaboration, inclusion, and continuous development – empowering our team members to grow personally and professionally.

Position Overview

We are looking for a motivated MSAT Process Development Technician to support downstream bioprocess development. You will conduct experiments, perform analytical tests, and manage laboratory operations to ensure smooth and compliant processes. This role is ideal for someone with a background in biotechnology or biochemistry and a strong interest in laboratory work and process optimization.

Key Responsibilities

Conduct Process Evaluation Studies:

• Carry out experiments to assess and validate scale-down models for downstream processes, including ultrafiltration, to support process development initiatives.

Perform Analytical Testing:

• Execute analytical tests on process samples to generate data for evaluating and optimizing bioprocess performance.

Manage Laboratory Activities:

• Oversee lab operations, including buffer preparation, inventory tracking for freezers and materials, and maintaining a clean and safe work environment through effective waste management.

Inventory and Resource Oversight:

• Ensure all necessary lab materials and supplies are adequately stocked and available for ongoing experiments and studies.

Ensure Compliance and Recordkeeping:

• Accurately document lab activities and experimental results while adhering to safety, quality, and regulatory standards.

Required Qualifications

• Bachelor’s degree in biotechnology, Biochemistry, or a related field.
• Previous experience in laboratory work, particularly in downstream bioprocessing, is preferred.
• Familiarity with ultrafiltration and other downstream processes.
• Proficiency in buffer preparation and inventory management.
• Strong organizational skills and attention to detail.
• Ability to work independently and in a team environment.

Why join us?

• Generous Leave Policy including 3 days to care for aging family members, reflecting our commitment to family wellbeing.
• Comprehensive Health & Wellness Coverage: Receive robust medical and dental coverage to support your health needs.
• Professional Development Opportunities: Access continuous learning programs and resources for career growth within the company.
• Inclusive Culture: Work in an environment where innovation, collaboration, and diverse perspectives are encouraged and celebrated.
• Shape the Future: Make a real difference in the pharmaceutical industry while advancing your career.

How to apply

Are you ready to play a key role in shaping the future of pharmaceutical solutions? If you're passionate about making an impact, we want you on our team!

Please submit your resume, outlining your qualifications and experience relevant to the role, here.

• Min 2 years of mobile Apple or Android repair experiences

• Able to work retail hours, 6-day work week, weekends, and public holidays

• Self-motivated. and team player

• Repairing of mobile phones / Macbook, LCD, Battery, spare parts replacement

• Diagnose, troubleshoot, and repair devices

• Able to Diagnosis & Repair Motherboard

• Provide actual diagnosis for clients,Ensuring work area are clean

• Ensure that all repairs meet CMS Repair quality standards

• Keep track of all devices and inventory while safeguarding all store stock

• Assist customers with their enquiries

• Able to comply with company rules and regulations.