Reporting to the Technical Officer and Senior Maintenance Supervisor, this role is responsible for preserving the good condition and functionality of the school premise. This includes maintenance and repair of electrical, plumbing, ventilation works and other building systems.

Responsibilities:

• Survey buildings and repair mechanical systems to ensure consistency with health and safety standards.
• Check work orders via the ticketing system daily and take on assigned work activities accordingly. This includes setting up and tearing down of events location.
• Ensure scheduled inspections, maintenance and repair work are conducted regularly and properly recorded. This includes the buildings (e.g. landscaping, painting, carpentry, pest control etc), equipments, electrical systems (e.g. replacing light bulbs/sockets, cleaning and repairing circuit breaker panels etc), alarm systems (e.g. fire and protection), plumbing systems and manual repairs (e.g. fixing of locks, replacing of windows etc).
• Maintain the air conditioning and plumbing systems to ensure functionality.
• Ensure emergency repairs are attended to promptly and efficiently.
• Maintain the inventory (e.g. tools and materials) in a tidy and appropriate manner.
• Undertake any other duties as assigned by the Senior Maintenance Supervisor and/or Technical Officer.

Requirements:

• Nitec in Engineering or equivalent
• Minimum 2 years’ experience working in maintenance
• Good knowledge in general maintenance processes and methods
• Basic understanding of electrical, hydraulic and other systems
• Able to carry load of up to 25kg.

Please note that only shortlisted candidates will be contacted.

• ITE in Mechanical Engineering or equivalent
• Good technical Knowledge on Mechanical or Electrical and Instrumentation
• Hands-On experience on Pumps (Centrifugal, gear pumps, etc.) and Motors
• Customer service oriented
• Independent and proficient in basic writing skills
• Class 3 driving license is a plus
• Relevant working experience in pumps servicing/repair

JOB RESPONSIBILITIES

· Follow standard operating procedures (SOPs) to accurately prepare, dispense pharmaceutical raw materials and ingredients in the correct quantities.

· Record and document manufacturing data, including dispensing data, logbook, cleaning record and other relevant information.

· Perform daily cleaning of the dispensing room, including surfaces, equipment, and storage areas, following established cleaning procedures SOP and protocols. Ensure that all workspaces are kept clean and organized to maintain a ISO clean room class 8 environment for pharmaceutical processes.

· Monitor and maintain dispensing device performance to ensure proper functioning and calibration.

· Adhere to safety protocols and procedures to protect yourself and others in the dispensing environment.

· Work collaboratively with other team members to ensure smooth and efficient operations.

· Report any issues, deviations, or incidents to supervisors or relevant personnel for prompt resolution.

· Participate in training programs and Adhere to Good Manufacturing Practices (GMP) guidelines and regulations related to cleaning and dispensing in pharmaceutical manufacturing.

·To carry out any other duties assigned by your immediate superior.

Job Description:

1. Carry out maintenance, repair and overhaul work on heavy vehicles, has diagnostic capability and able to perform major repair on engine and transmission

2. Ensure high standard of workmanship and minimize turnaround time for scheduled repairs and inspections to meet workshop’s service standards and according to job order.

3. Notify Team Leader of unusual repair problems which will require major repair and replacement parts recommendation.

4. Complete work order for each vehicle and unit serviced.

5. Adhere to defined guidelines in regards to safety, orderliness and etc.

6. Performs ad hoc duties as assigned by Superiors

Job Requirements:

1. Academic qualification: NTC 2 / Diploma Automotive Technology or equivalent

2. Competent in basic English (verbal & written)

3. Prefers candidates with at least class 3 driving license

4. Prior experience of at least 2 to 3 years in performing automotive service repair (commercial vehicle)

The job scope includes:

• Support laboratory operations by maintaining cleanliness, organization, and functionality of laboratory equipment and workspaces.
• Assist in conducting experiments, tests, and analyses under the supervision of laboratory staff.
• Procure laboratory supplies, equipment, and materials in accordance with project requirements and budgetary guidelines.
• Coordinate with vendors and suppliers to obtain competitive pricing and ensure timely delivery of procurement orders.
• Maintain accurate records of inventory levels, procurement transactions, and supplier information using designated software or systems.
• Assist in the development and implementation of procurement strategies to optimize cost-effectiveness and efficiency.
• Collaborate with laboratory personnel and project teams to identify procurement needs and recommend suitable products or solutions.
• Monitor and track the usage of laboratory consumables to prevent stockouts and minimize wastage.
• Adhere to safety protocols and guidelines while handling hazardous materials and operating laboratory equipment.
• Assist in other laboratory-related tasks and projects as assigned by supervisors or management

COMPETENCIES AND QUALIFICATION REQUIREMENTS

• Candidate must possess at least a Secondary School/Professional Certificate/NITEC, Diploma, Advanced/Higher/Graduate Diploma/Degree, any field.
• At least 1 year(s) of working experience in the related field is required for this position.
• Preferably Junior Executives or fresh graduate.
• Good communication skills and able to communicate with suppliers and internal department well.
• Excellent negotiation skills for best material/equipment/service pricing and payment terms from suppliers.
• Be driven, responsible, organized, independent and able to handle stress well.
• Able to learn fast, high attention to detail, and able to multi-task
• Basic Skills required: Proficient in Microsoft Office applications and multilingual skills (English & Mandarin)
• Possess positive working attitude, punctual, initiative and able to work productively under minimal supervision.
• Able to work under pressure and minimum supervision.
• Able to start immediately or at short notice is a plus.
• Able to work from 1:00pm - 10:00pm

ABRIDGED VERSION OF JOB DESCRIPTION AND REQUIREMENTS

We are looking for a focused and highly motivated individual to contribute to a dynamic and growing team. This team focuses on the fabrication of next-generation photovoltaic technology in our flagship project.

We regret that only shortlisted candidates will be notified.

Preventive system maintenance

- Hydraulic/Mechanical/Electrical support (Setting up, troubleshooting, repairs and construct)

- Support R&D activities to develop, fabricate and build/upgrade new/existing ROVs

- Support data recording activities on jobs

- System launch and recovery

- Ability to work outdoors on-board ships, possess a level of physical fitness appropriate to the job requirements, and able to work irregular shifts hours (when required) based on operations schedules.

- To assist with ROV operations as instructed and in accordance with approved procedures and policies.

- To perform remote vehicle and possess positive, hands-on systems maintenance, electrical, mechanical and hydraulic repair of the ROV and various ancillary systems

Job scope:

• Perform daily production activities including process monitoring and field checks
• Operate all production chemical processing equipment (ie pumps, boilers, DCS, etc)
• Maintain and record accurately in production documents (eg Work Order)
• Assist Production Supervisor to perform field work in order to meet production schedule
• Attend and contribute for production training matters
• Participate and respond to the certified emergency response team

Beneficial:

• Forklift, work-at-height, confined space, firefighting and hazmat

Requirements:

• Willing to work in shifts (8am to 4.30pm OR 1.30pm to 10pm)

Benefits:

• 5 days work week
• Shift allowances

Roles & Responsibilities

Technician Responsibilities:

• Inspecting, analyzing, and troubleshooting systems and equipment.
• Carry out troubleshooting and minor repairs to building works and M&E works including air-conditioning, electrical, plumbing and fire protection system.
• Involved in coordination and supervisor of construction works
• Responsible for planning, managing and ensuring smooth implementation and monitoring of projects assigned
• Responsible for effective site management which include safety inspection and quality control of materials and plants on site
• Required to plan, lead and monitor progress and performance against the project plan whilst managing the day-to-day operational aspects of projects which includes manpower planning, construction progress monitoring, preparation of master schedule and cost control.

Technician Requirements:

• Any Degree
• Experience as a technician.
• Ability to multitask and liaise with professionals in different fields.
• Ability to explain problems simply and clearly.
• Proficiency in MS Office.
• Ability to understand verbal and written instructions.
• Ability to follow health and safety regulations.
• Excellent mathematical and problem-solving skills.

Position Overview

The candidate will assist the Maintenance Supervisor to conduct preventive maintenance, troubleshooting & repair of CNC machines and update maintenance records regularly.

Job Responsiblities

• Preventive maintenance and calibration of the machines according to the checklist
• Analyse machine problems and repair
• Update and maintain maintenance records and forms regularly
• Any other ad-hoc maintenance activities such as maintaining coolant and lubrication of machines
• Perform other duties and responsibilities, as assigned.

Position Requirements

• Minimum 3 years of hands-on experience in maintenance and repair of CNC metal cutting machines
• Good knowledge in Electrical and Mechanical aspects of CNC Machines
• Able to read the PLC

• Shipyard working environment
• Knowledge on Marine and deck machinery service
• Hydraulic Pump and Hydraulic Motor service and testing knowledge
• Team work
• Willing to travel overseas at short notice
• Service report writting
• Communicating with customer
• Service work at workshop
• Workshop maintenance and tools keeping

* This is a 1 year contract role (subject to extension/conversion) *

Key responsibilities:

• Perform hands-on mechanical/electrical assembly tasks within the standard time
• Ensure that the assembled machine is according to Makino's quality standards
• Responsible for keying the operation time into EES for performance measurement
• Responsible for housekeeping and ensuring that the assigned machine area is clean and tidy
• Carry out duties in according with Quality Policy, EHS control procedures and WIS
• Ensure that all machine tools and instruments are properly calibrated and taken care of

Job requirements:

• Minimum NITEC/Higher NITEC in Mechanical/Electrical Engineering, or a related field
• Experience working in Assembly/Production is an added advantage
• Able to work shifts and commit to overtime on weekdays and weekends when required
• Able to handle physical work and stand for long hours
• Able to read and interpret drawings
• Have the initiative to learn and produce quality outcome
• Responsible and committed to the assigned task
• Team player and able to work independently

Roles & Responsibilities

The aircon technician will be involved in the maintenance, repair, and installation of different types of air conditioning systems. Aircon Technician will be involved in performing general maintenance services in households and offices all across Singapore, including washing aircon, diagnosing and rectifying issues in all brands and types of aircon, and installing and dismantling aircon. This role has the following responsibilities:
- Dismantle malfunctioning systems and replace worn out or defective parts.
- Perform chemical washes and chemical overhauls.
- Perform repair and maintenance on malfunctioning air conditioners.
- Perform general maintenance services on normally-functioning air conditioners.
- Prepare service reports after every completed job.
- Keep a record of job schedules.
- Pick up and deliver required materials and supplies as and when required.
- Communicate with clients with regards to problems in equipment and post-job reports.
- Perform any ad-hoc tasks given by supervisor or management.
This role requires the following skills
- Possess a CLASS 3 DRIVING LICENSE.
- Must be a confident driver and have experience driving medium-large-sized vans.
- Minimum 5 years experience working as an air conditioner technician performing chemical wash, general servicing, repairs, and installation.
- Experience working in CENTRALISED AIRCON SYSTEM maintenance is a big advantage.
- Confident at carrying out repairs and cleaning on all common aircon brands for wall-mounted, ceiling, casement, ducted, and portable aircon in Singapore including Daikin, Panasonic, Samsung, Mitsubishi Electric, Heavy Industries, Fujitsu, Toshiba, Carrier, and Europace.
- Able to speak and write basic English (excellent English is a strong advantage)
- Knowledge of electrical wiring.
- Able to do some heavy lifting and climbing.

- Willing to work on weekend shift

- Assist Project Manager and Engineer to fabricate in the stage of setup the monitoring system;

- Installation and setup of instrumentation hardware;

- Liaise positively among the project team;

- Testing and carrying out the maintenance of the system;

- Site inspection is required for troubleshooting

- Ensure that works carried out are in compliance with the Workplace Safety and Health Act

- Perform any other technical tasks as and when required

- Assist Project Manager and Engineer to fabricate in the stage of setup the monitoring system;

- Installation and setup of instrumentation hardware;

- Liaise positively among the project team;

- Testing and carrying out the maintenance of the system;

- Site inspection is required for troubleshooting

- Ensure that works carried out are in compliance with the Workplace Safety and Health Act

- Perform any other technical tasks as and when required

- Assist Project Manager and Engineer to fabricate in the stage of setup the monitoring system;

- Installation and setup of instrumentation hardware;

- Liaise positively among the project team;

- Testing and carrying out the maintenance of the system;

- Site inspection is required for troubleshooting

- Ensure that works carried out are in compliance with the Workplace Safety and Health Act

- Perform any other technical tasks as and when required

Purpose of the Position

• Support for the Operational readiness of the new plant (including walkdowns & punch listing, pre-commissioning, and commissioning activities, preparing SOPs & routine schedules etc.)
• To manage Linde Gas Singapore operations to ensure it is maintained safe, reliable, and efficient.
• The operations are to achieve key performance indicators (KPI’s) and annual plan objectives.

Responsiblities

• Accountable for compliance with safety, health, environmental, quality and relevant industry standards.
• Accountable for safe, efficient, and reliable operation of assets
• Accountable for investigating and trouble shooting process issues and outages
• Support process improvement, productivity and reliability projects
• Accountable for the planning, supervision, and execution of operation activities
• Accountable for compliance to all Procedures, Routines, Logs and other Operational Processes
• Accountable for meeting contractual and supply commitments
• Accountable for planning and executing TAR operational activities
• Accountable for controllable site costs
• Accountable for timely and accurate data reporting

Requirements

• ITE in Chemical Process technology /Diploma in Chemical Engineering or related discipline
• Min. 1 to 2 years Operational experience with demonstrable exposure to process plant operations and site-based activity or equivalent.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

• To perform general maintenance duties in building & machineries & equipments.
• To perform preventive maintenance on machines & equipments bt cleaning, lubricating, greasing etc for optimization.
• To perform minior electrical work not requiring licence such as office lighting, appliances etc.
• To apply paint or varnish all types of surfaces for protection
• Perform related duties as required such as external support or repair
• To assist in recording facility utilities.
• To carry routine inspections on all operating machineries & equipments
• To ensure all ad-hoc work are carried out

Minimum ITE with relevant fields

Able to work as a team

Efficient and adhere to KPI's given

Conform to WSH guidelines

Work at height certificate a plus

Responsible to set-up and operate CNC Machine Milling, Lathe

• Able to perform simple programming (For CNC machines only)

• Conduct first piece inspection

• Report to management in the event of non-conformance of components

• Adhere to good quality, housekeeping, and safety practices

• Perform 5S

Detailed

• Perform duties assigned by Engineering

• Check Routing Sheet details against drawings are correct before machining

• Maintain good housekeeping in the areas of work

• Always follow Company’s safe working practices and requirements

• Comply with safety measures and practices of the Company

• Report any unsafe conditions and practices to Production Superintendent or Engineering Assistant

• Ensure that a machining and inspection procedure is compiled to meet Quality Management System requirements and Quality Objectives

• Ensure adherence and compliance of the Quality Management System and achieve Quality Objectives

• Check raw material dimension before machining commencement

• Carry out the day-to-day machining operation in accordance with Routing Sheet and required date

• Perform 100% in-process inspection and recording inspection result

• Identity any non-conformance product and inform the problem to Production Superintendent or Engineering Assistant

• Check and report raw material defects / non-conformance before commencement

• Proper handling and usage of inspection devices and production machines/equipment

• Ensure job piece set-up and machining operation is in accordance with Routing Sheet and drawings

• Constant check on machining process and carry out in-process inspection to control the dimension according to customer requirements

• Maintenance and account for the inspection devices and tools issued for use

Requirements

• NTC 2 or 3 in Precision Engineering or equivalent

• Minimum 2 years of relevant experience

• Able to operate Fanuc Controller

• Experience in the machine applied for will be an added advantage

• Trainee positions available for interested parties without experience

• Able to read & interpret technical drawings

• Capable of using measuring instruments - Micrometre, Bore Gauge, Profile Projector

· Must be able to work night shift and split shift

· Must be able to work extra hours or weekend if needed

Basic Information

• 5 Days : 8am - 5.15pm
• Basic up to $3.3k
• Working location at Joo Koon

Job Responsibilities:

• Inspect, maintain, and repair material handling equipment (e.g., cranes, hoists) at customer sites.
• Conduct post-service reviews with customers.
• Utilize company digital tools for work and customer interactions.
• Identify sales leads and opportunities for improvement.
• Complete accurate, professional service reports promptly.
• Maintain company equipment, vehicles, and assets in safe, operational condition.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified**

Zen Career Pte Ltd | 24C2559
Wong Kaili (Kylie)| R21100484

The role will be based in Tuas.

Responsibilities:

• electrical maintenance, troubleshooting and repair of Pilot Plant and laboratory equipment.
• day-to-day operations, the general housekeeping and the proper preventive maintenance, repair and troubleshooting of Pilot Plant equipment in Singapore Pilot Plant facilities and R&D laboratory.
• proper execution of Pilot Plant trials/laboratory activities including all the preparatory and setting-up activities up, close-out activities and the turn-over of product samples and the storing of Pilot Batch records.
• Provide support to Project Teams when required such as the physical testing of raw materials and finished products, the receiving and sending samples and such other requests.

Requirements:

• ITE graduate or Polytechnic graduate with Diploma in the relevant field of Engineering - Electrical, Mechatronics and/or Automation.
• Must be physically fit and willing to work long hours in executing Laboratory and Pilot Plant trials.
• Preferably with experience in operating, maintaining and doing actual troubleshooting on wet process and pilot scale spray drying equipment including packaging test equipment would be an advantage.

Job Description

1. Perform hands-on Structure installation, Service & Maintenance and Repairs of Equipment / Instruments at outdoor field.

2. Perform instrument calibration, repair and maintenance services.

3. Prepare Service Report, PLan Service schedule

4. Involve in Ad-Hoc assignments as and when required

5. Willingness for Standby duties or work after office hour or during weekend and Public Holiday

Requirement:

1. Possess positive attitude to learn, has initiative and independent

2. Relevant educational qualifications in Marine/ Electrical / Mechanical / Structure Engineering (ITE/NITEC)

3. Willing to do field work (outdoor sites, onboard vessel /workboat, underground, canal, water coastal, etc.)

4. Team player

5. No prior experience may also be considered.

6. Self-driven and motivated individual with critical thinking skill

Interested applicants, please email detail resume to [email protected]

Regret to inform only shortlisted candidates will be notified

Job Description

- Troubleshooting photocopier hardware.

- Break-fix & Proactive Maintenance of photocopiers and printers.

- Software installation of printer drivers and scanners

- Programming WiFi router to connect laptop and printers.

- IT Support (remote and onsite) and customer service

- Onsite - Key operator training and troubleshooting

- Laptop, printer, copier and router setup.

- Delivery and setup of photocopier / printers

Requirements

- Min 2 year experience in similar field

- Network configuration experience

- Remote desktop support experience

- Work from Penjuru (West of Singapore)

- Training will be provided

The Role: To carry out a plan preventive maintenance work and corrective action in hospital, medical centre, clinics and other associated business unit, and where the scope of work covering the building services, mechanical, electrical, facilities equipment and other associated building maintenance work.

Key Accountabilities:

• To perform a plan preventive maintenance work (PPM) as assigned by supervisor
• Capable in leading a team of technicians in the absence of the Supervisor
• Capable of trouble shooting electrical fault, reinstate power supply and provide recommendation to prevent recurrence
• Capable of trouble shooting air-conditioning fault, reinstate air-conditioning system back to normal and provide recommendation to prevent recurrence
• Capable of repairing burst water pipe, mechanical work, medical gas system and other related facilities equipment.
• To certify all work completed by vendors / contractors

Qualifications and Experience:

• Minimum Qualification: NTC 2 or Higher NITEC and above, or equivalent.
• Minimum 5 years working experiences in M&E works and related field associated to building services.

Skills & Knowledge

• Mechanical & Electrical
• Building Services
• Air conditioning
• Blue Print Drawing

Other Requirements:

A good personality that is able to communicate confidently with patient, doctor & other stakeholders in responding to query, feedback or complaint related to plant operations matter and hospital operations.

Working hours:

Day Shift:

• 4 days - 0830hrs to 1800hrs
• 1 day- 0830hrs to 1730hrs

Night Shift

• 4 days - 2200hrs to 0730hrs
• 1 day - 2200hrs to 0700hrs

5-day work week on rostered basis to work on weekdays, weekends and PH, Max 42 hours.