We are looking for a technician or engineer who can handle repairs to commercial chillers and freezers, ice machines, ice cream machines and walk in chillers and freezers, ovens, grills, and other commercial kitchen equipment. We also need someone who can join our team to undertake building and installation of walk in chillers and freezers. A Singapore driving licence is required as you will be travelling from job to job either on your own or with a team to do repairs on site. You will also be required to do repairs and equipment checking in our own service department premises.

It will also be helpful if you can operate and use Windows based computers.

Good written and spoken English is a must.

Should have knowledge of cabling,Assembling electronics,Soldering ,Fitment of PCB ,Testing.

Physical assembly of parts ,PCB,Testing ,Soldering ,Coaxial and power connector cable assembly making.

testing of Assembled electronics and Physical parts .

Knowledge of following Cabling design and assembly instructions

ALG is currently hiring Aircraft Junior Technicians to work for our Commercial Aviation client based in Changi, Singapore. This role will be on a minimum two-year contract with an extension or a permanent role likely should you excel.

Job Responsibilities:

• Troubleshoot, inspect and perform maintenance on customer aircraft including engine, avionics, and aircraft components.
• Be attentive, and ensure close coordination between other trades (B1, B2, Sheet Metal, Cabin) to ensure continuous smooth progress and completion of the projects.

Job Requirements:

• At least 1 years of relevant experience in aircraft maintenance
• Willing and able to perform rotating shifts, including night shift work (if required)
• Able to read mechanical engineering drawings with the direction of the supervisor

If you're interested in this role, please APPLY NOW! Do note that only shortlisted candidates will be notified.

EA License Number: 11C4379 | Registration Number: R2093526

Technicians (6 Months Contract)

Our client is a leading vending machine provider. They are currently seeking for Technicians.

The role of the Technicians includes:

• Perform set-up, programming and testing of vending machines for field deployment.
• Assist with shifting of vending machines.
• ⁠Ensure tools issued and equipment are accountable, properly maintained and in good working condition.
• Follow safety rules/guidelines
• ⁠Assist with any ad-hoc duties assigned.

Job Requirement:

• Physically Fit
• Best to have experience in mechanical engineering or machine assembly

Interested candidates, please send your detailed resume stating Past Employments, including Reasons of Leaving, Last Drawn Salary for the most recent 2 positions (breakdown of basic salary, allowance, bonuses etc), Expected Basic Salary and availability.

WE REGRET TO INFORM THAT ONLY SHORTLISTED CANDIDATES WILL BE NOTIFIED

Manfield Employment Services Pte Ltd (Lic. No: 95C2823)
Posting Personnel: Win Hui
EA Personnel Reg No.: R23115634

Kindly send in your latest job resume without your NRIC numbers and other ID numbers.

For job resume(s) that contain NRIC numbers and/ or ID details, it may not be processed and your job application may be rejected due to unacceptable submission of job application details. Please refer to the advisory guidelines on the PDPA for NRIC numbers and other ID numbers.

By sending your job resume to us, it shall be deemed that you have agreed and hereby give your consent to MANFIELD in collecting, using and/ or disclosing your personal data for the purpose of accessing and processing your job application and/ or for future job opportunities within MANFIELD and/ or with the client(s) of MANFIELD. If you wish to withdraw your consent, please notify us. Kindly visit our company website for more information on the Privacy Policy.

ALG is currently hiring Aircraft Technicians to work for our aviation client based in Singapore. This role will be on a minimum one-year contract with an extension or a permanent role likely should you excel.

Job Responsibilities:

• Responsible for the broad range of maintenance tasks for several commercial aircraft models.
• Troubleshoot problems, make repairs, and complete inspections.
• Ensure smooth maintenance processes with strict adherence to schedules & targets
• Verify the aircraft conformity and the state of its engine or cockpit pieces
• Maintain the aircraft, repair the reported defects and ensure the plane service so it can leave in confidence.
• Supervise other technicians and assist with training.

Job Requirements:

• Diploma/NTIC in aeronautical engineering, aerospace, or any equivalent
• 3-4 years' of relevant experience in line/base maintenance for commercial aircraft is required
• Willing and able to perform rotating shift, including night shift work
• Be available to start immediately

If you're interested in this role, please APPLY NOW! Do note that only shortlisted candidates will be notified.

EA License Number: 11C4379 | Registration Number: R22105273

Service Technician(Kitchen Equipment)

Working days: 5.5days

Working Hours: Mon-Fri 8am - 5pm, Sat 8am -12pm

Working Location: Defu Lane 10 (Hougang)

Salary: Basic $2300 - $3000 + OT (When require)

Job Description:

• Install, service, and repair commercial kitchen equipment.
• Perform routine maintenance and inspections to ensure equipment operates efficiently and safely.
• Diagnose mechanical and electrical issues and implement effective solutions.
• Perform testing and inspection on finished goods for quality issues and perform corrective actions.
• Provide assistance and technical service requests to and by project clients.
• Other duties as assigned by management.

Tee Xin Li Reg No: R24121619

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Cabling Technician x2

Salary range: $2500 - $3500

Working days: Monday to Friday

Working hours: 8am-5pm / 8.30am - 5.30pm

Working Location: Mandai Estate - Kranji / Yew Tee

Job Description

• Install, repair, test & commission cable systems (voice/data/fibre optics)
• Performs termination and testing of new cabling
• Prepare / Install cable pathways & supports
• Assist in the preparation of tools & materials used for daily work assignments
• Troubleshoot cabling system issues & perform repairs & maintenance
• Assist co-workers with installation & routine maintenance of structured cabling systems
• Work closely with client to manage schedule operations of assigned duties.

Requirements

• NITEC (Electrical Engineering / Electrical Technology/ Electronic / IT ) or work- related experience
• Class 3 driving license would be advantageous

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

Our client is a top global pharmaceutical company.

Key Responsibilities:

• Operate automatic and manual chemical process equipment in production processes, following standard operating procedures.
• Perform quality control analyses and troubleshoot operational issues, coordinating with other functions as needed.
• Maintain equipment, prepare for maintenance, and handle materials (receiving, staging, dispensing, sampling).
• Complete documentation according to GMP and GxP standards and contribute to safety and quality incident investigations.
• Ensure continuous manufacturing by liaising with other departments and meeting production goals.
• Manage time, prioritise tasks, and maintain professional development.

Key Requirements:

• 2+ years of relevant experience with knowledge of industry practices. Fresh graduates will be considered.
• Experience in chemical or formulation manufacturing with knowledge of API and GMP.
• Driven and team-oriented with good communication and interpersonal skills.
• Must be comfortable with rotating shifts.

If you have what it takes, please send your resume to [email protected] or click APPLY NOW. For more information, please visit www.ambition.com.sg.
Data provided is for recruitment purposes only. Regrettably, only shortlisted candidates will be notified.
Business Reg No : 200611680D | Licence No : 10C5117 | EA Reg No : R2199023

The Senior Mechanical Technician Topsides/Marine performs mechanical completion, pre-commissioning and
commissioning activities.

In order to complete Mechanical Completion, Pre-commissioning and Commissioning activities in accordance with the project completion plan and schedule, he should:

• Understand his roles and responsibilities and to be compliant with.
• Understand the project completion execution plan from the Discipline Lead Technician.
• Understand Notification of Energization (NOE) Flow Chart.
• Understand System Drawings and Walk Down procedure;
• Complete a Daily Report to ensure clear visibility to the Discipline Lead Technician.
• Attend the Daily Discipline Tool Box Talk to understand the daily activities;
• Perform the Mechanical Completion Activities (‘A’ Scope ITRs) in close cooperation with the construction team in compliance with the project drawings and specifications.
• Perform the Pre-commissioning Activities (‘B’ Scope ITRs) in compliance with the vendor
  documentations and specifications.
• Support the Operation Test Procedure (OTP) under the supervision of the discipline Lead
  Technician.
• Utilize specific tools and test equipment for the system commissioning in safety and with
  quality.
• Assist field service vendor to conduct the system commissioning
• Comply with the HSSE requirements of the site. Ensure the safety and security of project personnel.
• Assess job related hazards during the development of safe working procedures and pursue
  opportunities to eliminate exposure.
• Attend the specified HSSE training and ensure direct reports are trained.
• Know how HSSE risks are managed and ensure that the HSSE controls for the activities/tasks are communicated. Supervise the safe execution of work and the implementation of controls.
• Communicate and practice in emergency response.
• Engage with team members and contractor staff on HSSE in meetings, pre-job briefings, during toolbox talks and attend key HSSE events. Communicate a consistent safety message, resolve unsafe situations, engage and intervene on unsafe behaviour and reward good safety behaviour.
• Liaise with HSSE department for support.

Requirement:

• Technical College diploma in Mechanical discipline or equivalent
• A minimum of 10 years’ construction or commissioning experiences in Oil & Gas Industry;
  especially for Offshore products and systems.
• Preferably gained within FPSO experience will be a strong selection criteria.
• Completions Tools (ECOM) including documentations
• PTW and JSA

Brunel International S.E.A Pte. Ltd.
UEN No: 199603098R
EA License No: 16S8067
Reza Johannes - R1871121

What's It Offer?

• Salary: Basic $1,800 - $2,800 + Fixed Allowances of $1000 + Night Shift Allowance
• Location: Jurong Island
• Benefits: Permanent Role with AWS and Variable Bonus

Who Can Apply:

• NITEC or Diploma holders in Chemical or Chemistry-related fields.
• Experienced candidates can be consider for senior positions.
• Willing to perform 12 hours shift

Key Responsibilities:

• Operate the plant and site services safely and efficiently following instructions.
• Suggest and implement safety and efficiency improvements.
• Communicate effectively with team members and other site functions.
• Perform routine maintenance and prepare equipment for service.
• Conduct analytical testing as required.
• Uphold safety standards and respond to emergencies when necessary.
• Train and coach new recruits.

Triton AI Pte Ltd
Registration Number: R1983718
EA: 21C0661

ROLE PURPOSE

The Instrument/Fire & Gas Technician conducts the mechanical completion, pre-commissioning, and supervises the Discipline Technicians.

ROLE CONTRIBUTION

To successfully complete Mechanical Completion, Pre-commissioning, and Commissioning activities according to the project completion plan and schedule, the Instrument/Fire & Gas Lead Technician should:

• Understand their roles and responsibilities and ensure compliance.
• Comprehend the project completion execution plan from the Discipline Superintendent.
• Familiarize with the Notification of Energization (NOE) Flow Chart.
• Fully understand System Drawings and Walk Down procedures.
• Complete a Daily Report to provide clear visibility to the Discipline Superintendent.
• Attend the Daily Discipline Toolbox Talk to address any hazards and environmental impacts.
• Prepare PTW, JSA (Job Safety Analysis), and TRA (Task Risk Assessment) as applicable in GEMS.
• Perform Mechanical Completion Activities (‘A’ Scope ITRs) in close cooperation with the construction team, ensuring compliance with project drawings and specifications.
• Conduct Pre-commissioning Activities (‘B’ Scope ITRs) in line with vendor documentation and specifications.
• Prepare and perform the Operation Test Procedure (OTP) under the supervision of the Discipline Superintendent.
• Supervise Discipline Technicians to ensure they are familiar with project requirements and safety rules.
• Demonstrate consistent Pre-Commissioning Progress.
• Utilize specific tools and test equipment for system commissioning safely and with quality.
• Assist field service vendors in conducting system commissioning.
• Monitor vendor work scope and activities.

This role is essential for ensuring that instrumentation and control systems and equipment are in safe condition and meet safety and technical standards.

EDUCATION, EXPERIENCE & CERTIFICATION

Education:

• Technical College diploma in Automation, Instrumentation & Control, or Electrical disciplines or equivalent.

Experience:

• Minimum of 6 years’ experience in construction or commissioning in Offshore products and systems. Experience with FPSO is strongly preferred.
• Proficient with Completions Tools (ECOM) and documentation.
• PTW and JSA.

Discipline Skills:

• Assisting the yard team with Instrumentation installation and performing Pre-Commissioning / Commissioning for Instruments on Topsides, Vessels, and various packages.
• Knowledge of control systems including ICSS and PLC systems. Experience with Siemens PCS7 DCS and Siemens loop wiring is a strong advantage.
• Proficient in fault-finding and repairing instrumentation/electronic systems and equipment in Control panels and in the field.
• Skilled in installation, calibration, testing, and troubleshooting for all types of Field instrumentation including Temperature, Flow, Level, and Pressure Transmitters, Analyzers, and condition monitoring sensors for rotating equipment.
• Experienced in Installation, Pre-commissioning, and Commissioning of Fire and Gas detection systems and its associated detectors and executive action means (Fire and Heat Detectors, open path flammable and toxic gas detectors, SDV, ESDV, BDV, etc).
• Experienced in installation, calibration, testing, and troubleshooting for all types of valves, especially control valves (pneumatic, hydraulic, or electrical) and various types of actuators and positioners.
• Skilled in Instrumentation cold and hot loop Checking activity.
• Proficient in interpreting all engineering documents including Instrumentation Datasheets, P&IDs, Cause & Effect Diagrams, Loop Drawings, etc.
• Experience using test equipment including pressure calibrators, HART Communicators, Multimeters, etc.
• Familiar with the concept of Commissioning Systems and representing the same using Limits of System Hanover Documents.

Brunel International S.E.A Pte. Ltd.
UEN No: 199603098R
EA License No: 16S8067
Reza Johannes - R1871121

Job Description:

• Ensure Automated Sorting Machine’s (ASM) reliability during operating hours
• Maintenance & Troubleshooting of ASM on site
• Work with machine vendor to draft out preventive maintenance task lists (daily/weekly/monthly/quarterly/yearly) in order to maximise the ASM operation life
• Read and Interpret maintenance procedures, equipment manuals, mechanical drawings and electrical schematics to perform required maintenance, servicing and troubleshooting
• Work with machine vendors to perform emergency maintenance on machine and avoid unplanned downtime
• Develop Training Materials for ASM operations and centreline to ensure machine reliability

Requirements:

• Nitec / Higher Nitec / Diploma in Electrical & Electronic / Mechatronics / Mechanical / Instrumentation Engineering
• Min 2-3 years of relevant working experience in electronic maintenance and repair work on belt, conveyor and pulley systems
• Required to work on rotating shift (day/night) to support 24/7 operations
• Willing to learn and ensure the machine is always ready for usage
• Able to troubleshoot machine problems and document them down for learning
• Willing to learn, take equipment ownership and be involved in ensuring machine reliability
• Solve equipment / system problem(s) through recognized methodologies like root cause analysis

This client company specialized in Precision Surface Finishing Equipment.

Job Highlights

• Location: Ang Mo Kio
• Working days: Monday to Friday
• Working Time: 8.30am to 6.15pm
• Benefits: AWS & Bonus included

Job Responsibilities:

• Perform Lapping & Polishing process
• Machine installation and training

Job Requirements:

• Min. Higher NITEC / Diploma in Electrical or Mechatronics discipline graduates or any technical qualification in Precision Engineering
• Knowledge of Mitsubishi or Siemens PLC is added advantages
• Preferred candidates with min 2-3 Years Working Experience in Precision Engineering machine operation or machinery servicing
• Training will be provided
• Can read technical drawing
• Able to use the measuring tool example micrometre, height gauge, CMM
• Any knowledge on using Auto Cad