Job Description:

1. Performing F.A inspection and inspection of parts and products with desktop measuring tools / CMM / Smart scope at the incoming / outgoing / in-process gate.
2. To prepare and generate standard inspection report and lead team in performing quality inspection.
3. Monitor on critical customer products, with a corrective and preventive action programs in managing customer complaints / improvement plans.
4. Administer and work on continuous improvement program in achieving good process control.
5. Provide technical guidance to group of inspectors.
6. Manage customer complaints, corrective and preventive action programs.
7. Work closely with customers and inter-department to meet the quality requirements.
8. Experience in calibrating measuring equipments.

Requirements

• Preferred to have NTC / Diploma in related engineering field.
• Required to know-how in using desktop measuring tools, and other equipment such as CMM, Smart Scope, Roundness Tester and Roughness Tester
• Computer competancy.

• Position: Service Technician x2
• Basic Salary：$2500 - $3300 + $60 handphone allowance
• Senoko (Woodlands, Sembawang)
• Working hours: Mon - Fri 8am – 5pm, Sat 8am – 12pm

Company is a manufacturer and solutions provider for company that require to have customize security gates and automatic doors, eg: Flap Barrier and Swing Gate

Requirements:

• Candidate must possess at least a NITEC, Professional Certificate in ( Electrical / Electronic / Mechanical) or equivalent.
• Must have basic Electrical/ Mechanical and Electronic background.
• Must have class 3 driving licence
• Able to start work immediately or short notice.

Job Responsibilities:

• Servicing, installation, testing and troubleshooting of electrical and mechanical parts at clients' premises or workshop.
• Access control, able to work under minimal supervision.
• Experience in Security System is a plus.

#SCR-carson-cheong

⭕ Cheong Kar Chun ⭕ Team Manager ⭕ R1980386

⭕ The Supreme HR Advisory ⭕ 14C7279

Job Description

Responsibilities:

You will maintain a continuous improvement mindset to seek out opportunities for enhancements to quality, productivity and/or patient safety care.

• Assist in prescription processing/supplying of medicines to outpatients, inpatient and other departments, e.g.: Laboratory, Radiology and wards
• Compound lotions and antiseptic solutions as directed
• Pack oral and topical medications
• Collect prescription charges for outpatients
• Assist Pharmacist or Senior Pharmacy Technican in store management
• Assist in compiling statistics for reports and survey
• Involve in Quality Improvement or Patient Safety Project

Requirements:

• Diploma in Pharmaceautical Science/ Applied Science (Pharmaceutical Sciences) or equivalent
• Preferably with experience in clinic or hospital setting
• Team player with good interpersonal and communication skills
• Computer literate with knowledge of Microsoft Excel and Word
• Senior positions available for candidates with more than 5 years of experience

We regret to inform that only shortlisted candidates will be notified.

Job Description

• Industry/ Organization Type: Chemical Manufacturer
• Position Title: Maintenance Technician (Mechanical)
• Working Location: West (Nearest MRT: Tuas Crescent)
• Working Hours: 5 days (Monday-Friday: 8 am-5 pm)
• Salary Package: Up to SGD 5500 + Allowance SGD 220 + OT Pay + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Maintain, repair, and troubleshoot all plant equipment.
• Schedule and perform preventative maintenance.
• Participate in 5S and Total Productive Maintenance (TPM) teams.
• Assist in developing new equipment or plant expansion projects.
• Ensure contractor safety and oversee specific inspections or maintenance tasks.
• Maintain accurate maintenance records.
• Safely handle hazardous chemicals within the plant.
• Perform mechanical preventative and corrective maintenance on plant utilities, facilities, and manufacturing equipment.
• Operate and maintain systems such as steam boilers, water treatment, HVAC, air compressors, chemical and gas systems, and fire protection systems.
• Assist in spare part management.
• Maintain effective communication between shifts for smooth work transition.
• Process permits, conduct job safety analysis, and manage Lock-out, Tag-out (LOTO) procedures.
• Review and contribute to maintenance documentation such as Safe Work Procedures (SWP) and Job Safety Analysis (JSA).
• Report work progress to supervisors daily or as needed.
• Use a Computerized Maintenance Management System (CMMS) to manage work orders and checklists.
• Ensure contractors and third-party vendors execute maintenance tasks efficiently and adhere to safety regulations.
• Perform equipment or system testing, commissioning, and inspections to hand over to the operations team after maintenance or project completion.
• Participate in routine safety drills, troubleshooting, and failure analysis.
• Serve as an on-call technician for emergency maintenance after working hours.
• Suggest and implement ideas for continuous improvement in maintenance procedures to optimize costs, processes, and safety standards.
• Assist in maintaining spare parts inventory and ensure proper preservation in the store.

APPLY NOW!!!

• Min. ITE in Engineering.
• Min.3 years of maintenance experience in a related field, ideally within a chemical manufacturing environment.
• Proficient in the use of hand and power tools.
• Have basic knowledge of process control, refrigeration, boilers, steam systems, pumps, heat exchangers, Lockout/Tagout (LOTO) procedures, and industrial safety practices.
• Experience in electrical work or water treatment is an advantage.
• Willing to work OT on Sat.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68758 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Description

• Industry/ Organization Type: Engineering/Manufacturing
• Position Title: Technician (PCB)
• Working Location: Kallang
• Working Hours: 5 days (Mon – Fri, 8.30 am – 6.30 pm)
• Salary Package: Basic salary up to $2,800 + OT Pay + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Repair and soldering of PCB boards.
• Conduct inspections and measurements to maintain high-quality standards.
• Assist and support fellow team members as needed.
• Meet productivity and quality goals.
• Any other ad-hoc duties.

APPLY NOW!!!

• Minimum GCE O Level/NITEC
• Experienced with PCB boards is an additional advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #66282 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Healthcare / Medical (Dental Laboratory)
• Position Title: Dental Technician
• Working Location: Ubi
• Working Hours: 5.5 days (Monday – Friday 8.30 AM to 5.30 PM, Saturday 8.30 AM to 12.30 PM)
• Salary Package: Basic Salary up to $2,500 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Read and interpret doctors’ prescriptions.
• Download digital scans and upload files for fabrication.
• Operate CAD/CAM equipment such as milling machines.
• Create and perfect models from dental impressions.
• Build and repair dental prostheses such as crowns, bridges, onlays, and veneers, using both traditional and digital methods.
• Personalize dental prostheses to function correctly according to the prescription.
• Ensure all products meet quality standards before delivery.
• Work closely with team members, dentists, and dental partners to achieve the best results for patients.
• Manage and order dental materials and equipment.
• Maintain equipment, arrange for servicing and repairs when needed.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Minimum GCE O Level, NITEC or equivalent
• Prior experience in a dental laboratory is an added advantage
• Competent with computer and smartphone applications/software

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67110 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Job Description

• Industry/ Organization Type: Manufacturing/ Chemical
• Position Title: Maintenance Technician
• Working Location: Tanjong Penjuru (Company transport provided at Buona Vista MRT/ Jurong East MRT)
• Working Hours: Monday to Friday, 8am – 5.15pm
• Salary Package: Up to $4,200 + Shift Allowance + Transport Allowance + AWS + Variable Bonus + Insurance
• Duration: Permanent

Key Responsibilities

• Responsible for maintenance of plant equipment, building utilities, labs, DI station, and WWTP.
• Perform hands-on repair work on various equipment, including centrifugal, lobe, and air diaphragm pumps, tank control systems with agitators, and drum filling machines.
• Manage mechanical and electrical control panel tasks.
• Handle maintenance work orders within the SAP system.
• Preferably experienced in performing preventive maintenance on plant static and rotating equipment, as well as corrective maintenance and modification work.
• Contribute improvement ideas and support SQCDP and 5S initiatives.
• Supervise contractors for repair and project work, ensuring standards are met.

APPLY NOW!!!

• At least NITEC in Electrical/ Mechatronic/ Mechanical Engineering.
• Minimum 4 years of related working experience in electrical wiring troubleshooting and mechanical repairs in a chemical plant.
• Able to perform hands-on repair work.
• Able to understand mechanical hydraulic machine concept/ electrical wiring diagram.
• Prior working experience in waste treatment/ DI plant operation and milling machine would be a plus.
• Able to standby for cases of emergency calls or OT for weekends (if required)

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70469 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

FOOD PRODUCTION TECHNICIAN Job description

A Food Production technician is responsible for preparing and processing foods, ensuring that production meets quality standards and is delivered in a timely manner. Duties include operating small kitchen equitments like Mixer Grinder, Deep Frier, Buy Electric Cookers, packing and monitoring product quality.

A food production technician is need to prepare and package foods according to the company's standards. Food production workers may also be responsible for maintaining a safe and hygienic working environment, following food safety regulations and ensuring products meet food safety requirements.

Duties and Responsibilities

• Assist with the preparation of food items

• Ensure the kitchen and production area are kept clean and tidy

• Check ingredients and food products for quality

• Package food items ready for sale

• Follow food safety regulations and health codes

• Preparing ingredients for the shift; washing vegetables, chopping, seasoning meat, etc.

• Preparing deep fryer, utensils, and grill for shift

• Roti prate flour mixing

• Ready to cook Goring items (nasi,ikanpils,mee,kwithya,noodles)

• preparation of south indian & north indian curies

• Cooking order according to food health and safety standards

• Delivering food order to wait staff in a timely manner

• Storing all food properly

• Sanitizing and cleaning work stations and utensils

• Reordering stock and food supplies

• Monitoring other cooks and team members

Requirements and Qualifications

• Ready to work any shift

• Able to work in a fast-paced environment

• Able to multitask, prioritize, and manage time efficiently

• Physical endurance to stand for an entire shift

• Self-motivated and self-directed

• Works well as part of a team and on individual tasks

• Able to quickly memorize complex or multiple orders

• Degree or Diploma or minimum three years relevant work experience

• Able to work early mornings, nights, and weekends

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Mechatronic Technician (Electrical)
• Working Location: Loyang Way
• Working Hours: 5 days, Monday to Friday (8.30 am-5.30 pm)
• Salary Package: Basic Salary up to $3,500 + OT pay + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Perform regular maintenance on mechatronic systems to ensure optimal performance.
• Diagnose and repair mechanical, electrical, and software malfunctions in mechatronic systems.
• Conduct routine inspections and preventive maintenance on machines and equipment.
• Ensure that all systems are correctly configured for optimal operation.
• Collaborate with engineers to integrate new technologies into existing systems.
• Provide technical support to operations and production teams.
• Troubleshoot issues related to mechatronic systems and provide timely solutions.
• Develop and update technical documentation, including maintenance logs and operational manuals.
• Ensure all mechatronic systems meet the required safety and quality standards.
• Implement quality control measures to improve the reliability and efficiency of systems.

APPLY NOW!!!

• A minimum qualification of Diploma or Degree in Mechatronics, Electronics, Mechanical Engineering, or a related field.
• Minimum 2 years of experience in electrical or related field.
• Strong understanding of mechanical, electrical, and electronic principles.
• Excellent problem-solving abilities and attention to detail.
• Strong communication skills, both verbal and written.
• Ability to read and interpret technical drawings and schematics.
• Proficiency in programming languages related to mechatronics (e.g., PLC, C++).
• Able to travel for servicing when required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #67127 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job duties:

• Dealing with robotics projects for automobiles
• Troubleshooting electrical and mechanical technical issues
• Conducting electrical assemblies, routing, and harnesses
• Implementing schematics diagram to install and fabricate electrical systems
• Understanding electrical systems and architecture for various forklift or related machines

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Service Technician (Printer)
• Working Location: Aljunied
• Working Hours: 5 days (3 days in Singapore, 2 days in Johor) (8.30am – 6.00pm)
• Salary Package: Basic $2,100 + AWS
• Duration: Permanent

Key Responsibilities

• Provide on-site technical support and maintenance for printers, ensuring they operate efficiently and effectively.
• Perform troubleshooting, diagnostics, and repairs on various printer models.
• Conduct routine maintenance and servicing to prevent equipment breakdowns.
• Install and set up new printers and related equipment at customer sites.
• Provide technical training and support to customers on the proper use and maintenance of printers.
• Maintain accurate service records, including details of repairs, parts used, and customer interactions.
• Coordinate with the technical support team to resolve complex issues and ensure customer satisfaction.
• Travel between Singapore and Johor to provide service coverage as required.
• Ensure compliance with safety guidelines and maintain a clean and organized work environment.
• Stay updated with the latest printer technologies and industry trends.

APPLY NOW!!!

• GCE O-Level or higher.
• 1 year of experience in servicing and repairing printers or similar equipment is advantageous.
• Strong technical skills with the ability to diagnose and fix hardware issues.
• Good understanding of printer mechanics and electronics.
• Excellent problem-solving and troubleshooting abilities.
• Strong communication and customer service skills.
• Ability to work independently and as part of a team.
• Willingness to travel between Singapore and Johor as required.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67174 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Food Manufacturing
• Position Title: Facilities Technician
• Working Location: Woodlands (Nearest MRT: Admiralty)
• Working Hours: 5 days, 8.30 am – 5.30 pm (Saturday compulsory, 1 off day on weekday & Sunday)
• Salary Package: Up to $2,000 + OT + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Oversee daily facility operations and ensure safe, efficient functioning and maintenance of equipment and systems.
• Perform inspections, assess risks, and inform operations of issues.
• Conduct preventive maintenance for facility systems and equipment.
• Respond to emergencies and participate in 24-hour response activities.
• Handle setup and upgrades of production lines.
• Adhere to HACCP maintenance schedules.
• Organize machinery storage and unused equipment.
• Follow safety, security, and hygiene procedures.
• Complete tasks as directed by the Senior Engineer.

APPLY NOW!!!

• At least NITEC in Mechanical Engineering
• Minimum 2 years of related working experience
• Able to start work immediately or on short notice
• Possess Welding Cert would be an advantage

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68847 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

1) Cabin Technician

2) Aircraft & Component Technician

3) Sheetmetal Technician

4) Engine Technician

5) Ground Support Equipment Operator

CABIN AIRCRAFT TECHNICIAN

• To carry out inspection, repair, work on passenger and crew seats, galleys, toilets, aircraft cabin equipment and all fixtures & fittings items associated with the aircraft cabin interior in accordance with the approved company procedures and as per airworthiness and regulatory requirements.
• To remove and replace aircraft parts relating to the Aircraft Cabin to ensure high standards of maintenance of aircraft cabin and furnishings and to ensure the highest standards of passenger safety and comfort.
• Complete and maintain manuals and technical documents pertaining to the repair and maintenance work carried out on the cabin interior.
• Responsible for the cleanliness and tidiness of the working area.
• Monitor, maintain and control the movements of all spares and materials, to ensure their proper usage and deployment, including the returning to stores of all the un-used spares and materials at the end of each shift.
• To perform cabin configuration changes on fleet as per the operational requirements.
• To ensure cabin safety aspects are maintained during cabin maintenance and pay particular attention to Emergency equipment.
• To assist aircraft engineers & technician with regard to daily maintenance activities on the aircraft as assigned by Maintenance Supervisor.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionic Engineering/ Aeronautical Engineering.
• At least 2 years of Cabin Maintenance working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Able to commit rotating shifts, if applicable.

A&C AIRCRAFT TECHNICIAN

• Perform C and D aircraft heavy maintenance tasks as directed by a Certifying Licensed Engineer/Duty Supervisor.
• Perform other tasks that may reasonably be requested by the Licensed Aircraft Engineer/Duty Supervisor.
• To carry out routine aircraft servicing tasks as required in accordance with maintenance manual procedures, observing all safety procedures and manufacturers/company regulations. Depending on the discipline this may include conducting general visual inspections and fluid replenishment system servicing, refuelling etc.To effectively use any specialized tooling or test equipment that may be required as part of the checking, testing, replacement or servicing of a system or component.
• The ability to understand the need for such equipment’s as references in the aircraft manufacturer’s manuals is essential.
• The ability to communicate at various levels, and to coordinate with other areas over technical issues, to ensure that all relevant parties are aware of the aircraft’s serviceability status.
• To ensure the maintenance of tools and equipment in the relevant work place and conducting safe working practices at all times.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 2 years of A&C maintenance working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Able to commit rotating shifts, if applicable.

SHEETMETAL AIRCRAFT TECHNICIAN

• To perform Structural Repair as per OEM approved Structural Repair Manual and Repair Disposition.
• To assist Aircraft License Engineer and Supervisory Lead to perform damage/repair assessment.
• To perform part forming such as skin doubler, stiffener and bracket for structural repair proposes in-accordance to OEM approved manual or drawing.
• To perform basic airframe/cabin task as required to facilitate access removal for structural repair.
• Required excellent tool maintenance and housekeeping practices.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 5 years of Sheetmetal working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Familiar on basic structural repair tooling and practices.
• Must be able to work in confine space such as Fuel Tank if needed.
• Capable to interpret OEM Approved Engineering Drawing, Aircraft/Component Maintenance Manual and Structural Repair Manual.
• Able to commit rotating shifts, if applicable.

ENGINE OVERHAUL AIRCRAFT TECHNICIAN

• Perform disassembly/ assembly of engine/ module for repair and overhaul.
• Perform Boroscope inspection
• Install engine components onto the engine/ module.
• Perform troubleshooting, modification and maintenance works

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 2 years of Engine Overhaul working experience in Aviation industry, excluding OJT/Helper.
• Able to commit rotating shifts, if applicable.

GROUND SUPPORT EQUIPMENT OPERATOR

• To carry out preventive and corrective maintenance of the GSE
• To ensure equipment decals are visible. Replace if necessary
• Delivery of GSE to and from hangar
• Carry out inspection of GSE around airport bays
• Repositioning of maintenance steps from bays when required
• To ensure all metal structures of GSE are corrosion free by removal of corroded surface and using of corrosion protection agent
• To lubricate all movable joints

Requirements:

• NITEC in Mechanical / Electrical / Mechatronic engineering
• Class 3 or 4T preferred

Field Service Technician

Job Description & Requirements

• On-site servicing, maintenance and installation works at client's site
• Repair and fault rectification on equipment
• Support in preparation of equipment (before delivery) & delivery
• Assisting in Service Centre activities
• Ability to diagnose fault to component level
• Support in-house and field service job
• Other ad-hoc duties as assigned

Requirements:

• Minimum 1 year(s) experience in relevant field
• Good communication, independent, committed, full of initiative, meticulous, good customer service
• Entry-level are welcome but must have willing-to-learn attitude
• Driving license (Class 2 and/or Class 3 manual)
• Able to work overtime (Saturday) when required
• Can start work immediately

Benefits : Good salary package / 5 days / Incentive / AWS

Only shortlisted candidate will be notified

Interested candidate may send in your resume to: [email protected] or whatsapp: 96518935

Job Description

• Perform regular / periodic maintenance for the diving hats, equipment & system.
• Monitor the expiry certs for the gauges, filters & parts.
• Perform function testing for diving systems before deployment to site.
• Inspect, repair and replace mechanical parts for the air compressors.
• Work with high pressure air cylinders and bailout bottles for maintenance / pressure testing.
• Liaise with 3rd party contractors for maintenance works and progress.

Job Requirements

• Familiar with pneumatic and hydraulic systems will be an advantage.
• Those with Class 3 driving license will be an advantage.
• Successful candidates will be sent for Dive Tech Course and all the required training.

Responsibilities:

1. Familiar with a wide range of vehicle headlight models and systems.
2. Capable of independently and proficiently performing automotive headlight maintenance and repair tasks.
3. Able to address customer inquiries and effectively resolve disputes.

Requirements:

1. Have basic electrical knowledge

2. Minimum 5 years working experience in automotive repair or related technical environment

3. Valid Class 3 or 3A driving license (preferably Class 3)

4. Able to work independently

Job Scope for Electrical Technician

Position Overview:

An Electrical Technician is responsible for the installation, maintenance, repair, and troubleshooting of electrical systems and equipment in various settings. The role requires a strong understanding of electrical theory, wiring diagrams, safety protocols, and technical troubleshooting skills.

Key Responsibilities:

• Install electrical wiring & lighting
• Knowledge to troubleshoot, circuit breakers, fuses, and electrical panels.
• Perform inspections of electrical systems and components and rectification work
• Follow strict safety procedures and protocols.
• Practise lockout/tagout procedures to safely isolate electrical power.
• Maintain accurate records of electrical inspections, repairs, and maintenance activities.

Education and Certifications:

• High school diploma or equivalent; technical or vocational training in electrical technology preferred.

Job Responsibilities

• Perform preventive maintenance activities with the objective of ensuring equipment capabilities are stabilized and optimized through continuous improvement and cost reduction within the limits of cost permitted and department policies and objectives.
• React to error/alarm messages of manufacturing equipment.
• Perform equipment health check and troubleshooting.
• Prepare the procedure/OCAP or report regarding to machine issues.
• Identify and address potential areas for improvement and optimize tool availability, cycle time, utilization, and cost.
• Actively participate in continuous improvement project, to upkeep line equipment.
• Work as the proxy tool owner to manage the tool performance and meet the KPI requirement.
• Understand and follow all health, safety, and environmental procedures and requirements.
• Support on safety, ISO & 5S audit.

Spare Parts

• Assist in the management and upkeep of equipment spares and inventory system.

Training

• Assist Engineers in staff training, such as maintenance training, prepare training materials, cross training of zone members, updating and reporting.

Safety, Housekeeping, Discipline & Others

• Perform the activities (5S, workplace safety and occupational hazards) to ensure conformance of safety instructions and promote good housekeeping, organization, and manufacturing practices.
• Ensure good housekeeping, plant work discipline, ESD and safety awareness at all times.
• Execute Ad Hoc task instructed by supervisor / manager.

Others

• Carry out effective planning for corrective and preventive measures to maintain high equipment reliability and process stability with minimal resource requirements.

Job Requirements

• Diploma/Certificate in Electrical/Electronics/Mechanical/Mechatronics Engineering or equivalent
• At least 3-year of work experience in the semiconductor industry
• Able to perform swing shift (work in weekend) schedule, including working in a cleanroom environment.
• Able to work well with minimal supervision and ability to prioritize tasks and follow specific procedures.
• Strong technical skills and knowledge of semiconductor process tools
• Good communication skills and follow up with tool vendor for issue troubleshooting and solution.
• Experienced in repair and maintain a variety of Lithography exposure, coater, developer, bonder, scrubber tools.
• Able to use MS office.
• Able to read and write PLC (Programming Logic Control) will be an added advantage.
• Able to read FDC charts and use Power Bi will be an added advantage.
• Strong teamwork, able to work well with a global team and other duties as assigned.

Roles & Responsibilities:

1. Repair & Service Commercial Chiller & Freezer & Other Kitchen Equipment

2. Familiar with Copper Welding

3. Assist in Goods Delivery & Stock-Taking

Job Requirements:

1. Min O-Level or Equivalent

2. Able to Communicate in Basic English & Mandarin

3. From Monday to Fri (9AM to 6PM) & Sat (9AM to 1PM)

4. Possess Class 3 Driving Licence

Corporate Benefits:

1. Basic Salary + Overtime + Allowance + CPF (For Local)

2. Annual Bonuses (For Full-Year Employee Only)

3. Annual Increment

4. Medical Benefits

5. Annual Leave + Complimentary Leave (For Confirmed Employee Only)

6. On The Job & External Training Provided

7. WICA Insurance

8. Good Career Prospects

Refer to our corporate website: www.singmahsteel.com

or our Facebook page: https://www.facebook.com/singmahsteelrfg

for more details on our corporate profile and description.

本公司诚意聘请有兴趣的求职者，请联系我们

About the Company

Casa Creation is the authorized distributor for SK Magic, one of the world’s most advanced home appliance makers originating from Korea. Combining sleek design, effortless use, and amazing health benefits, we believe that our SK Magic product range - particularly state of the art water and air purifiers - are the fast-rising appliances of the future in today’s hectic yet discerning society.

Vision:

Creating a clean and safe living environment, through the pursuit of fundamental health care

Core Values:

1. Health: We believe in creating a clean and safe environment, through the pursuit of fundamental health care
2. Eco-Friendliness: Our products reduce resource consumption, minimise pollution and reduces the production-use-disposal process.
3. Convenience: We aim to minimise labour for all our customers, creating a seamless experience and curating our products to suit each of your needs.

Responsibilities:

• Install company water purifiers on-site, including set up of parts, troubleshooting, and quality checks.
• Perform routine maintenance, such as inspecting parts, checking, and replacing filters.
• Perform repair works as necessary.

Skills Required:

• Minimum 1 year experience in plumbing or related technician work.
• Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
• Customer oriented with positive work attitude.

Other Requirements:

• Possess a valid Class 3/3A driving license.
• Able to work 5.5 days a week.

About the Company

Casa Creation is the authorized distributor for SK Magic, one of the world’s most advanced home appliance makers originating from Korea. Combining sleek design, effortless use, and amazing health benefits, we believe that our SK Magic product range - particularly state of the art water and air purifiers - are the fast-rising appliances of the future in today’s hectic yet discerning society.

Vision

Creating a clean and safe living environment, through the pursuit of fundamental health care

Core Values

1. Health: We believe in creating a clean and safe environment, through the pursuit of fundamental
   health care
2. Eco-Friendliness: Our products reduce resource consumption, minimise pollution and reduces the production-use-disposal process.
3. Convenience: We aim to minimise labour for all our customers, creating a seamless experience and curating our products to suit each of your needs.

Responsibilities

• Install company water purifiers on-site, including set up of parts, troubleshooting, and quality checks.
• Perform routine maintenance, such as inspecting parts, checking, and replacing filters.
• Perform repair works as necessary.

Skills Required

• Minimum 1 year experience in plumbing or related technician work.
• Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
• Customer oriented with positive work attitude.

Other Requirements

• Possess a valid Class 3/3A driving license.
• Able to work 5.5 days a week.

Singapore University of Technology and Design immediately invites applications for multiple Research Assistant positions to work in Singapore, in the following areas:

• Robust perception, planning, and control for field robots
• Simultaneous localization and mapping
• Experimental robotics
• Novel mechanism synthesis and analysis
• Electromechanical system design experience is strongly preferred

Your primary responsibilities include:

• Designing and developing reconfigurable robotic platforms to achieve project goals and KPIs (spanning surveillance, maintenance, and payload-carrying robot platforms)
• Implementing and researching specifications for various subsystem components, component analysis, designing for durability, maintainability, and estimating physical constraints required to achieve expected functionality and reconfigurability .
• Have a good understanding of the electrical system of the robot so as to optimize the mechanical designs
• Have a strong understanding of the PCB design and fabrication
• Have a strong understanding of different manufacturing processes and manufacturing constraints
• Designing mounts for onboard sensors and computing equipment with consideration for dust and waterproof requirements
• Simulating using CAD Solidworks for FEA analysis and Keyshot demonstration
• Experience with electrical and electronic components and the use of fabrication and soldering set is strongly preferred
• Able to effectively communicate ideas and take constructive criticism
• Able to effectively work in a multi-disciplinary team and with third-party vendors

The position requires min Diploma in Engineering Product Development/Information System/ Mechanical/Electrical and Electronics/Computer Engineering or a related area.

Candidates are expected to possess experience in field robotic systems as evidenced by developmental project experiences/publications. Strong commitment to research and development is essential.

Roles & Responsibilities

• Receiving installation, testing, commissioning, and service schedule instructions from the Project Supervisor/Manager.
• Preparing to attend installation and service jobs, which involves contacting customers and landlords to schedule installations and service requests, and organizing the necessary project equipment, spare parts, and safety gear.
• Diagnosing and isolating faults, communicating with customers about the cause of the issues, and outlining corrective actions.
• Resolve faults by replacing defective components, readjusting system settings, and reinforcing end-user training for proper equipment usage.
• Escalate unresolved project issues to the supervisor for further guidance and action.
• Coordinate and schedule site testing with the main contractor, subcontractors, and customers as required.
• Manage and account for company-issued assets, including tools, laptops, vehicles, intellectual property, and more.
• Report on any follow-ups regarding outstanding service jobs and submit weekly timesheets.
• Participate in all job-related training to stay informed about the solutions offered by the company.

Requirements:

• Skilled in interpreting blueprints and schematic drawings.
• Capable of climbing ladders and proficient in the operation of handheld power tools.
• Strong communication skills with a commitment to delivering exceptional customer service.
• Possess a valid driver’s license and demonstrate the ability to operate fleet vehicles safely at all times

High-Tension (HT) Switchboard Service Technician

1. Able to carry out high-tension switchboard servicing.

2. To assist the Project Engineering with day-to-day high tension (HT) switchboard servicing and installation.

3. Able to understand electrical as-build drawings and switchboard switches and diversion.

Requirement

1. Diploma in Electrical Engineering or related

2. Working experience in High-Tension Switchboard (HT)

3. Able to work independently

a. Salary range from S$3,500 to S$5,500

JOB SUMMARY:

The Engineering Technician is responsible for ensuring the efficient operation of all hotel facilities, systems, and equipment to guarantee guest comfort, safety, and satisfaction. This role requires proactive maintenance, repair work, and troubleshooting to address any technical issues within the hotel. The Engineering Technician will work closely with other hotel departments to support operational needs, uphold safety standards, and ensure that all technical systems function properly, contributing to an overall exceptional guest experience.

WHAT YOU WILL BE DOING:

• Guest and Facility Support:Ensure the smooth operation of all hotel systems, including HVAC, plumbing, electrical, and mechanical systems, for the safety and comfort of guests.
  Respond promptly to guest requests and issues related to the hotel’s facilities, ensuring minimal disruption and maximum satisfaction.
  Carry out preventive maintenance tasks, addressing any technical issues before they impact guests.
  Assist with repairs of guest rooms, public areas, and common hotel facilities, ensuring guest comfort and operational efficiency.
  
• System & Equipment Management:Regularly inspect hotel equipment, including heating, cooling, plumbing, and electrical systems, to ensure proper operation and compliance with safety standards.
  Perform troubleshooting and repairs to hotel systems, machinery, and equipment, identifying and resolving issues quickly and effectively.
  Maintain a clean and organized mechanical room, ensuring all tools and supplies are readily available and properly stored.
  Document maintenance activities, including repairs and inspections, in the Duty Log to ensure clear communication and follow-up on any unresolved issues.
  
• Safety & Compliance:Ensure compliance with all safety protocols, building codes, and hotel standards.
  Respond to emergency situations, including fire alarms, water leaks, or power failures, ensuring a safe and quick resolution.
  Conduct safety checks on all hotel systems and infrastructure to identify and prevent potential hazards.
  Assist in emergency drills and safety training, ensuring the hotel staff is well-prepared for any situation.
  
• Collaboration with Hotel Departments:Work closely with other hotel departments, including housekeeping, front desk, and security, to address maintenance issues promptly and prevent any inconvenience to guests.
  Assist in setting up and maintaining hotel equipment for special events or large group functions as needed.
  Provide technical support to other hotel staff, offering guidance or assistance on maintenance-related tasks when necessary.
  
• Other Operational Duties:Ensure that all hotel vehicles, including buggies and other transport equipment, are properly maintained, clean, and in working condition.
  Recharge and maintain the hotel's buggy fleet, ensuring it is operational and ready for use by guests and staff.
  Maintain a tidy and organized environment in all work areas, ensuring that tools and supplies are stored appropriately.
  Perform other duties as requested by supervisors or hotel management to support the hotel's operational needs.
  

YOUR EXPERIENCE AND SKILLS INCLUDE :

• Strong verbal communication skills, allowing for effective communication with guests and hotel staff.
• Ability to work cohesively with a team, building positive relationships with colleagues and departments.
• A proactive, solutions-oriented mindset, with an ability to stay calm and professional in urgent situations.
• Strong attention to detail and a commitment to providing high-quality service.
• Ability to work in a multi-cultural environment, demonstrating respect and understanding for diverse guest needs and backgrounds.

Qualifications:

• Secondary/High School education required; technical certifications in engineering or maintenance preferred.
• Possess a valid driving license.
• Minimum 1 year of experience in hospitality, facilities management, or a technical role.
• At least 2 years of experience in maintenance, repair, or engineering, with hands-on experience in troubleshooting systems and equipment.
• Previous experience in a hotel or similar service environment is an advantage.
• Knowledge of building systems, including HVAC, plumbing, electrical systems, and mechanical equipment.