FM Technician Job Responsibilities

1. Conduct preventive maintenance and regular inspections of installations, fixtures and fittings, equipment, common facilities and property to ensure they are clean, safe and in good working condition.
2. Undertake minor building, mechanical and electrical repair works, and handyman works (such as changing of light bulbs, reset drawer locks, etc).
3. Monitor and attend to maintenance service requests, investigate and initiate corrective actions for any service and equipment breakdown, or fault detected during routine check, servicing and maintenance.
4. Daily, weekly and monthly inspection of key facilities, systems and critical areas.
5. Coordinate and supervise the rectification of defects, maintenance, replacement and upgrading works carried out by contractors.
6. Supervise contractors/vendors performing maintenance works on building facilities (e.g. Building maintenance, Mechanical & Electrical systems (M&E), horticulture, cleaning, pest control etc).
7. Monitor utilities consumption by taking water and electricity meter readings and report out of normal consumptions.
8. Assist in fire safety management, emergencies and business continuity plan for the Authority’s premise.
9. Liaise with Authority’s employees on projects and maintenance works and ensure compliance with fire, health and safety standards.
10. Coordinate and work with audio and visual equipment and cleaning contractors to set up meeting venues including seating arrangements and equipment.
11. Update information databases and breakdown record for engineering systems.
12. Any other facilities management works or related works that arise from the building operations and need.

Job Qualifications

1. At least three (3) years’ relevant experience in building operation and maintenance of building facilities.
2. The technicians shall hold minimum a NITEC/Higher NITEC in Facility Management or Mechanical and Electrical Services or equivalent.
3. Additional experience in electrical system, uninterruptible power supply, generators, FM200, fire alarm, sprinkler, high voltage and low voltage switchboards will be an advantage.
4. Additional qualifications such as Electrical Worker License/Singapore Certified Energy Manager (Associate)/Green Mark Facilities Manager will be an added advantage.

• MNC (Woodlands)
• Company Transport Provided
• Basic: $1700 to $2100 + AWS + VB (3 to 4 months)
• Excellent Benefits + Career Progression
• Training Provided for candidate without or with lesser experience

Job Responsibilities:

• General maintenance, equipment repair and overhaul plant equipment / instrument.
• Carry out minor fabrication work (piping, support system, vessel, electrical supply, lighting system).
• Maintain good housekeeping and 5S in the work area.
• Assist in plant troubleshooting job.
• Comply to all risk control measures and adhere to safe work procedure according to WSH (Risk Management) requirements while performing assigned work duties.
• Operate processes in accordance to operating procedures, process safety information (where applicable) and safe work practices.
• Participate in relevant safety and health programs, trainings and initiatives.
• Report on safety and health incidents and accidents.
• Any assigned ad-hop task/s.

Requirements:

• Preferably 2 to 3 years’ experience in a process manufacturing environment.
• Basic Education Requirements: Minimum NTC-3 in Welding/Maintenance Fitting or Electrical fitting and Installation or other relevant technical certificate.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities

• Inspect and examine aircraft components for leaks, cracks, breaks or other issues
• Read and utilize blueprints, maintenance manuals, ATA codes, illustrated parts catalogues, service bulletins and other maintenance documents to troubleshoot and complete work assignments
• Maintain, repair, and rebuild aircraft structures, functional components, and parts such as wings and fuselage, rigging, hydraulic units, oxygen systems, fuel systems, gaskets, and seals
• Perform routine maintenance operations, such as the replacement of equipment’s and aircraft components
• Modify aircraft structures, space vehicles, systems, or components, following drawings, schematics, charts, engineering orders, and technical publications
• Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities
• Perform hourly, daily and monthly inspections to check for cracks, oil leaks, burned areas, foreign object damage, warping, distortions, missing segments and wear
• Complete all tasks in the allotted time frame and to the quality standards of our company, our customers and the FAA
• Promote safety within the workplace by monitoring others and yourself to guarantee all tasks are performed within the safety manual guidelines, and communicate with other mechanics and supervisors to coordinate repairs and keep apprised of safety concerns
• Order supplies, equipment, materials and parts for repairs and general maintenance
• Keep detailed records of the inspections performed, repairs finished, maintenance procedures and ordered parts.

Requirements

• Min NITEC/Higher NITEC/Diploma in Aeronautical Engineering or equivalent OR
• NITEC/Higher NITEC/Diploma in Engineering with relevant Aerospace experience
• Work location: Seletar
• Singaporeans only

Our client is a Oil & Gas Industry. Due to their current expansion plan, they are looking for a Senior Electrical Technician to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities:

• Apply functional requirements and use engineering tools to design electronic circuits or control systems for product changes or new development under direct supervision.
• Utilize software tools or applications to analyze and test electronic circuits or systems, documenting performance against design criteria.
• Identify testing objectives at a component level following Health, Safety, and Environment (HSE) procedures, and evaluate test results.
• Assist in preparing component specifications and follow established work processes to document designs.
• Collaborate in preparing materials for design reviews.
• Work with mentors to understand the process of submitting invention disclosures and recognize ideas with potential intellectual property (IP) value.
• Communicate effectively as a team member to contribute innovative solutions.
• Demonstrate initiative by exceeding expectations and paying close attention to detail, ensuring work is completed accurately and to the highest standards.
• Design, simulate, and implement high-temperature electronic systems, including component selection, qualification, and PCB assembly.
• Conduct functional and qualification testing of designed PCB boards and sub-assemblies.
• Prepare technical reports and presentations to document and communicate results.

Job Requirements:

• Skills acquired through completion of an undergraduate degree in Electrical Engineering or a related discipline.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

R24122162 | LAI CHAI LI

Our client is a Oil & Gas Industry. Due to their current expansion plan, they are looking for a Electrical Technician to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities:

• Apply functional requirements and use engineering tools to design electronic circuits or control systems for product changes or new development under direct supervision.
• Utilize software tools or applications to analyze and test electronic circuits or systems, documenting performance against design criteria.
• Identify testing objectives at a component level following Health, Safety, and Environment (HSE) procedures, and evaluate test results.
• Assist in preparing component specifications and follow established work processes to document designs.
• Collaborate in preparing materials for design reviews.
• Work with mentors to understand the process of submitting invention disclosures and recognize ideas with potential intellectual property (IP) value.
• Communicate effectively as a team member to contribute innovative solutions.
• Demonstrate initiative by exceeding expectations and paying close attention to detail, ensuring work is completed accurately and to the highest standards.

Job Requirements:

• Skills acquired through completion of an undergraduate degree in Electrical Engineering or a related discipline.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

R24122162 | LAI CHAI LI

Job Requirement

• Perform routine inspections, maintenance, and repairs on compressors and related equipment.
• Diagnose and troubleshoot mechanical and electrical issues with compressors.
• Replace or repair defective components and parts as needed.
• Ensure all work complies with safety regulations and company standards.
• Maintain accurate records of service and repair activities.
• Provide technical support and advice to clients regarding compressor operation and maintenance.
• Respond to service calls and emergencies promptly.

Qualifications

• Proven experience as a Service Technician
• Possess Class 3 Driving license
• Strong knowledge of compressor systems and components.
• Proficiency in troubleshooting and repairing mechanical and electrical issues.
• Familiarity with safety regulations and best practices.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

1. JOB DESCRIPTION

Job Title

Technician/Engineer (Contract/Perm)

Occupation

Technician/Engineer

Job Description & Requirements

Job Highlights

• Mon - Fri 8.30am to 5.30pm. Training provided
• Transport and Mobile Allowance + OT + Medical reimbursement

Job Description

Responsible for facility hook-up, installation, repair and start-up process of semiconductor equipment.

Responsibilities

• Perform installation work according to guidelines and procedures
• Perform safe and proper move-in according to procedures
• Tally and check the conditions of parts and accessories
• Support engineering activities
• Ensure good EHS compliance

Requirements

• Must possess Min. Certificate / Diploma in Electrical / Mechanical / Electronic Engineering or equivalent
• Preferred bilingual in English and Chinese to handle Chinese speaking customers’ technical enquires & conduct trouble shooting based on customers’ feedback
• Cleanroom environment
• Able to start immediately preferred

Job Description:

• Perform installation of electrical related equipment following company policies and manufacturer’s specifications.

• Carry out wiring of both low and line voltage to cooling and heating equipment.

• Determine the right material needed for installation work by pre-measuring jobs.

• Provide necessary support to other team members to be able to complete tasks on time as instructed by management.

Job Requirement:

• Physically capable of performing the above duties.

• With relevant experience in electrical work.

• Possess good electricaltechnical knowledge.

This is a fantastic opportunity for a skilled production operative to join a manufacturing environment in a leading manufacturer of radio frequency (RF) antenna products. The role would suit a motivated, individual looking to work as part of a friendly team.

The company is an industry leader in a specialist field with extensive experience and a well-established reputation, producing a range of bespoke and standard RF antenna products ranging from large volume products for global companies to small volume custom work for highly specific applications. The company manufactures products for a diverse range of industries and market sectors including public safety, defence, transportation, utilities, manufacturing, construction and consumer goods.

Job objective:

• Assembly of RF products – experience in fitting connectors is essential
• Soldering cables to PCBs – experience essential
• Assisting with fulfilment of production orders
• Reading and understanding production instructions
• Assisting with quality test and inspection
• Assisting with stock inventory management
• Ensure that all procedures are adhered to guarantee a high quality product at all times and ensure products produced comply with quality standards.
• Liaising with other departments as required fulfilling orders and ensuring manufacturing proceeds according to the needs of the customers and the business.
• Assisting in maintaining the efficient operation of the manufacturing area.
• Assisting resolution of problems and implementing process improvements to gain efficiencies and reduce wastes (Time, process, material) and advising of any issues or improvements
• Assisting in maintaining a clean working environment, by cleaning work areas and shop floor at regular intervals.
• Maintaining safe working environments by following relevant H&S procedures, and advising of any issues or improvements.
• Helping with pick and pack if needed
• Undertake any reasonable ad hoc work as requested by the Site Manager

Specific Knowledge & Skills:

• Committed to safety, quality and productivity
• Soldering and connectors fitting experience is essential
• Knowledge how to use network analyser would be beneficial
• Good computer literacy and confident working with numbers – basic numeracy essential
• The ability to work independently and as part of a team
• Attention to detail
• Flexibility to effectively switch between tasks
• Good time-keeping
• Soldering: 2 years (Required)

Working Hours:

Permanent full time position, 40 hours per week with 1 hour lunch break (unpaid)

Monday to Friday: 8:30-5:30pm

Work Location: In person; Space@Tampines; 18 Tampines Industrial Crescent; Singapore 528605

Job Type: Contract 12 months, with a possibility turning it to full Time permanent

Pay: $2,500.00 - $3,000.00 per month

Supplemental Pay: 13th month salary

Benefits: Employee discount; Health insurance

Responsibilities:

• Execute daily routine calibration and repair work orders as assigned.
• Troubleshooting instrument breakdowns and carry out intermediate repairs on production systems or report back to Engineer/Manager.
• Supervisor vendors/service providers activities for routine calibration work to ensure instruments are maintained in full operational status.
• Promptly inform engineers of any incidents or events, irrespective of the nature and severity.
• Ensure all calibration works are duly carried out as scheduled and in compliance with Engineering standards and calibration procedures.
• Work with contractors, vendors/service providers for calibration work to ensure instrument is maintained in full operational status.
• Coordinates with external contractors for specialized calibration work
• Report promptly to Engineers of any incidents or events, irrespective of the nature and severity.
• Perform work order documentation in SAP and calibration data in CMX.
• Good housekeeping of work areas.
• Inform Engineer/Manager when encounter non-compliance issues including work delay, breakdown, missing parts and etc.
• Any other duties as assigned by Supervisor/Manager.

About You:

• NITEC / Higher NITEC in Electronics Engineering or Polytechnic
• Preferably 3-5 years work experience in related field
• Good understanding of electronics theory
• Able to perform shift work and respond on-call for calibration/service breakdown and support ongoing operations.
• High compliance in EHS and GMP

Duration : 12 months. Option to extend/convert subject to performance review.

Based in Tuas.

Job Responsibilities:

• Operate, maintain, and repair central chiller plant equipment, including chillers, cooling towers, pumps, and related components.
• Carry out preventive maintenance of properties and attend to all work orders issued by tenants and management
• Monitor system performance, conduct regular inspections, and perform preventive maintenance to ensure optimal efficiency and reliability.
• Ensure compliance with safety rules and regulations
• Maintain and monitor building systems
• To assist the departments in all aspects pertaining to electrical, ACMV engineering work to plumbing, sanitary installations, fire sprinkler, alarm systems, lifts and escalators etc

Key Requirements:

• Minimum 5-7 years of related building maintenance experience
• Skilled in Building Works, M&E, Air-Con and/or Electrical
• Independent, proactive and responsible team player
• Flexibility to work shift hours
• Effective communication skills to work collaboratively within a team and communicate with tenants and management.

Job Description & Requirements

1. Assembly of higher end products which require self-interpretation and understanding of technical drawing, assembly requirements, which also includes Geometric Dimensioning and Tolerance
2. Electrical wiring and soldering for installation and assembling of mechanical and sub-assembly level components.
3. Troubleshooting of machinery, servicing and maintenance.
4. Perform testing and commissioning of machines and testers.
5. Providing smooth and continuous running and support on machines and projects.
6. To provide rework or make call for the required rework processes.
7. Providing guidance to the team of operators.

Competence Requirements

• Preferred to have NTC / Diploma in engineering field or equivalent.
• Fresh NTC / Diploma holder may be considered, else others with minimum 2 years of related work experience in manufacturing environment.
• Able to read and interpret technical drawing.

Benefits Summary:

• Up $2500 + OT + Bonus + Benefits
• 5 Days work week
• Working Location: West
• MNC with good working environment

Responsibilities:

• Repair, maintenance and troubleshoot EV & heavy commercial vehicles
• Inspect and fix a vehicle’s electrical system
• Perform automotive care tasks like checking fluid levels, rotating tires and changing oil fluids
• Read & understand electrical schematic diagram and use the multimeter & insulation meter to measure voltage, etc
• Any ad-hoc duties as required

Interested candidates, please submit your updated resume in MS format by using the Apply Now Button.

Follow us on Facebook for more info:

https://www.facebook.com/EC-Recruitment-Pte-Ltd-113771667194961/

Text us on for more details:

https://wa.me/6593839640

Follow us on Telegram for more job opportunities:

https://t.me/ecrecruitment

Our dedicated and approachable E&C consultants will get back to you soon for a confidential discussion.

By submitting your application or resume to us, you will be deemed to have agreed and consented us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

**We regret to inform that only shortlisted candidates would be notified. **

Edward TOH

Registration No: R1658602

EA License No: 20C0278

☑ Basic Salary : $2800 - $3200 + AWS + High Variable Bonus !!

☑ Transport Allowances : $350 - $1000 (Own Transport, ERP & Parking or Corporate Private Hire Reimburse)

☑ Additional Pay : OT Pay, Standby Allowance + ERP & Parking or Corporate Private Hire Fully Reimburse !!

☑ Flexible Work Schedule : 5 Days, Flexi Hours - Required to standby once a month ( with Standby Allowance)

☑ Location : Island-wide (Parking & ERP Fully Claimable)

☑ Employer : MNC - Medical Device & Equipment Manufacturer

☑ Perks :Good Benefits & Career Prospects

Job Responsibilities:

• Install, maintain, and troubleshoot medical angiography systems at customer sites.
• Perform routine inspections and CM/PM maintenance to ensure equipment reliability.
• Collaborate with engineering teams to relay customer feedback to contribute improvement.
• Deliver technical training to clients and internal staff.
• Maintain accurate documentation for FSN/FMI/FSCA reporting on assigned products.

Job Requirement:

• Higher NITEC, Diploma / Degree in Biomedical, EEE or Mechatronic Engineering.
• OR 1 - 3 years of strong hands-on field servicing skills in medical device are highly advantageous

Interested applicants are welcome to apply online with updated Resume/CV via Apply Now button or email to [email protected]

Only shortlisted candidate will be notified

Kam Soo Leng, Yvette

Registration: R22107492

Job description

Responsibilities

• To perform electrical and electronics diagnostics, repair services , troubleshooting for Electrical and Electronics Home Appliances and Industrial Equipments.

• Ability to use electronics and electrical testing equipment such as multimeter, clamp meter e.t.c.

• Customer Service for receiving and collection of electrical appliances and equipment.

• Pleasant personality as customer facing in a professional and polite manner.

• Providing goods receiving and service reports and communicating with the customer on the diagnostics outcome and next course of action

• Manage stock inventory, ensure proper care of equipment and appliances repair.

• Willing to take on new responsibilities and new projects on short notice.

• Willingness to ask and learn

Job Requirements

• Diploma / Nitec preferred (Mechanical Engineering or Electrical Engineering or related discipline preferred.)

• Strong interest and passion in hands on repair and troubleshooting

• No experience required. On job training provided

• Valid Class 3 or Class 2 Driving License (preferred by not a must)

• Working hours: 5 ½ day 8.30am to 6.30pm (Mon-Fri) 8.30am - 12pm (Sat)

• Immediate hire

Roles & Responsibilities:

1. Repair & Service Commercial Chiller & Freezer & Other Kitchen Equipment

2. Familiar with Copper Welding

3. Assist in Goods Delivery & Stock-Taking

Job Requirements:

1. Min O-Level or Equivalent

2. Able to Communicate in Basic English & Mandarin

3. From Monday to Fri (9AM to 6PM) & Sat (9AM to 1PM)

4. Possess Class 3 Driving Licence

Corporate Benefits:

1. Basic Salary + Overtime + Allowance + CPF (For Local)

2. Annual Bonuses (For Full-Year Employee Only)

3. Annual Increment

4. Medical Benefits

5. Annual Leave + Complimentary Leave (For Confirmed Employee Only)

6. On The Job & External Training Provided

7. WICA Insurance

8. Good Career Prospects

Refer to our corporate website: www.singmahsteel.com

or our Facebook page: https://www.facebook.com/singmahsteelrfg

for more details on our corporate profile and description.

本公司诚意聘请有兴趣的求职者，请联系我们

Key Responsibilities:

• Provide professional manicure and pedicure services, including nail shaping, cuticle grooming, hand and foot massage, and polish application

• Offer a range of nail care services such as gel polish application, acrylic or gel extensions, and nail art as per client requests

• Maintain a clean, organized, and sanitary work environment, including disinfecting tools and equipment after each client

• Assess clients' nail and skin conditions and recommend appropriate treatments and aftercare

• Stay updated on the latest nail trends, techniques, and products to enhance service offerings

• Ensure a positive client experience by being attentive, friendly, and professional

• Manage appointment scheduling and client records accurately

• Comply with all health, safety, and hygiene standards

Required Skills & Qualifications:

• Proven experience as a Manicure/Pedicure Technician or similar role

• Certification in nail care or cosmetology preferred

• Proficiency in nail techniques such as gel and acrylic application, nail art, and classic manicures and pedicures

• Strong attention to detail, creativity, and ability to stay calm and professional under pressure

Job Responsibilities:

• Installation, termination and performing the electrical wiring for control panel, instruments and machine per drawing.
• Assembly and installation of the components and fittings.

Multinational corporation
Basic + AWS + Variable Bonus + Overtime
Good benefit & welfare including medical insurance

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Job description:

• Dealing with Excavator, Prime Mover, Reach stacker, & forklift problems and repair
• Troubleshooting electrical & mechanical components & inspecting vehicle engine
• Replacing & repairing malfunction parts & potential leaking
• Understanding vehicle diagnostic systems & functions
• Repair experience in excavator, forklift & prime mover, etc

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use and/ or disclosure of personal data by AlwaysHired and its affiliates for the purpose of job application processing and administrative purpose, in compliance with the relevant provision of personal data protection act.

Working hours: 3 rotating shift work (3 rest day every 2 weeks)

Morning – 7am to 4pm

Afternoon – 2pm to 11pm

Night – 10.30pm to 7.30am (night shift allowance at $14/night)

Location: CBD area

BASIC + AWS + PERFORMANCE BONUS!

Responsibilities

• Perform daily operational activities which includes attending to customer's enquiries, needs and complaints.
• Perform preventive and breakdown techinical support and maintenance for mechanical/electrical services, plumbing & sanitary services, Aircon servicing and maintenance, ACMV systems, chillers and electrical control.
• Perform electrical related work for all Low and High voltage systems, and preventive & breakdown technical support.
• Inspect and maintain site electrical equipment.

Requirements

• Candidate must possess Licensed Electrical Worker (LEW) Certified Grade 7
• Recognized techincal certificate in Mechanical & Electrical, Building Services, Facility Technology or its equivalent.
• Candidates with WSQ qualifications are welcome to apply.
• Possess hands on and technical knowledge with minimum 3 years' experience in Facilities Management.
• Able to perform shift work

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform that only shortlisted candidates would be notified

We wish you all the best in your career search.

You are welcome to visit our website at www.rdtpsg.com

RD Trusted Partners Pte Ltd| EA License No.: 24C2352

Chee Wei Qian (Sandy) | EA Personnel No.: R24125920

Roles & Responsibilities

Job Description

· Good learning attitude and able to work independently

· Perform air-con installation works/piping works, testing & commissioning of installed air-con systems

· Experience with split unit or VRF system

· Preparation of service report for client’s endorsement upon completion of maintenance works.

· Attend complaint related to air-con and ventilation works

· Ensure all works carried out in accordance with safety procedures

· Perform any ad-hoc works as assigned

Requirements:

· Min 2 year of hands-on experience in trouble-shooting & service-repair of refrigeration systems

· Willing to work 6-days week / Overtime

Requirements:

· Candidates must possess at least Diploma/Advanced/Higher/Graduate Diploma, Bachelor's Degree in Biological Sciences (Biotechnology/Molecular Biology) or equivalent.

· No work experience required.

· Preferably Entry Level specialized in Biotechnology or equivalent.

Responsibilities:

· Carry out DNA Sequencing related experiment, documentation work

· Conduct routine molecular work

· Follow established protocols and SOP’s to test received samples for QC acceptability.

· Assist in designing and performing experiments for the optimization and validation of sequencing workflow.

· Troubleshoot instrument problems when necessary.

· Preparation, daily maintenance, and use of Sanger sequencing instruments and equipment.

· Maintain a systematic and proper record of all orders.

· Perform administrative duties, including but not limited to purchasing laboratory consumables, chemicals/equipment, preparing invoices, maintenance of inventory and assisting in company safety matters.

Working Hours: 12pm - 9pm, including one hour break.

Jober Pte Ltd UEN 201616711G

EA License No: 16C8401

XING CHONG | Registration No: R22109860

#SGUnitedJobs

Website : https://www.jobersg.com/

ALG is currently recruiting for Trainee Technicians with our Engine MRO client.

This traineeship is an opportunity for aspiring individuals who are keen to join aviation industry but do not meet the pre-requisites as a trained aircraft engine technician. Upon successful completion of the programme, a career as a qualified aircraft engine technician awaits you.

Job Responsibilities:

• The programme involves a fully-sponsored training programme with an allowance over the one-year training period.
• Upon completion of the training, the qualified aircraft engine technician will serve a two-year or four-year bond.
• Career progression opportunity is open to promising technicians.
• The programme encompasses initial company familiarisation, classroom training and on-the-job training.
• The initial familiarisation provides an insight to the working environment prior to attending classroom training.
• The three-month classroom training, consisting of theory and practical sessions, will be conducted and assessed by an external training academy.
• The nine-month on-the-job training provides the opportunity to learn and work on the renowned Engines.

Job Requirements:

• NITEC / Higher NITEC / Diploma in Engineering (eg. Aeronautical/Avionics/Mechanical/Mechatronics/Manufacturing/ Electrical/Precision)
• Completed full-time National Service (for locals)
• Able to perform rotating shift work
• Willing to work in Changi

If you are interested in this role, please APPLY NOW! Please note that only shortlisted candidates will be notified.

EA License Number: 11C4379 | Registration Number: R21103388

ALG is recruiting for an Avionics Technician for our Aerospace Client.

This is a permanent role is based in Singapore. Candidates who have just graduated with a diploma in electronics are welcome to apply.

PRINCIPAL ACCOUNTABILITIES

o Set up and operate test equipment in the repair, overhaul and modification of Avionics Line Replaceable Units.

o Conduct regular functional/self test and calibration on Automated/Manual Test Equipment.

o Ensure all test equipment are within calibration due-date before testing of LRU is carried out.

o Perform modification in accordance to service bulletins on LRUs as and when required.

o Troubleshoot customer's unit and return it to serviceable condition in the most efficient manner.

o Verify and ensure all repairs or modifications carried out conform to quality and workmanship standards.

o Maintain good housekeeping practices at work place and test benches at all time.

o Carry out duties as assigned by the Supervisor to meet team’s objectives.

KNOWLEDGE AND SKILLS

o Minimum Diploma in Electronics a must.

o Minimum of one year experience in Avionics equipment repair; those with no experience is welcome.

o Able to read digital and analog electronics circuitry.

o Able to perform manual soldering on electronics components.

o Have good color perception.

o Able to communicate effectively in English, both verbally and in writing.

o Ability to interpret schematic diagrams, troubleshoot and repair PCB assembly down to component level is highly desired.

o Competent to conduct tests according to the Component Maintenance Manual.

o Able to interpret, evaluate test results and write test report.

If you are interested in this role, please APPLY NOW! Please note that only shortlisted candidates will be notified.

EA Licence Number: 11C4379 | Registration Number: R22105273

Job Title: Process Technician