Singaporeans or PR ONLY

Experienced AV Technician and driver

Singapore class 3 (Manual) driver license and driving experience required

Job Highlights

===========

Full Time position.

Opportunity to upskill and learn new things. Career advancement

Opportunities to try out and be exposed to new technologies

Casual environment

Roles & Responsibilities include but not limited to:

======================================

- Follow arrangements and company standard procedure.

- Safely transporting audio visual equipment to specified locations in a timely manner.

- Assisting with the loading unloading packing and setup of TV and speakers.

- Ensuring that the company vehicle is always parked in areas that permit parking in order to avoid towing / fines.

- Ensuring safe driving at all times and not tail-gating vehicles in order to avoid accidents and damages to the delivery vehicle.

- Keeping the company vehicle clean and properly maintained by performing regular washing, cleaning and vehicle maintenance.

- Reporting any accidents and vehicle damage to management.

- Good working attitude and communication skills

- Able to work OT

- Setup TV

- Setup Speakers and other AV equipment

- Lay cables in a neat manner

General Requirements

==================

- Singaporeans or PR ONLY

- Experienced AV Technician and driver

- Singapore class 3 (Manual) driver license and driving experience required

- Highly responsible, punctual and good time management

- Attention to details and well organised

- Good team player with service-oriented mindset

- Experience setting up sound system, digital and analog audio mixer, LED video wall and other AV equipment will be ideal

- Work at height certification will be ideal

- Versatile, willing and flexible to take on broad spectrum of tasks and new tasks

- Adaptable to changes, stress and last minute requirements

- Positive, can do attitude

- Calm and level headed

- Good problem solver

You will assist in the preparation, distribution and inventory management of pharmaceuticals according to standard procedures. This includes packing, dispensing as well as replenishment of drug supplies. You will also be required to perform periodic stock counts and general housekeeping.

Requirements:

• Diploma in Pharmaceutical Sciences or Certificate in Pharmacy Technician Course;
• Able to perform shift duties including weekends and public holidays;
• Highly motivated team player with good communication skills; and
• Candidates with supervisory experience may be considered for senior position.

At Otis, it’s our people that make us different. Come and join OTIS today and be part of the Forbes 2023 World's Best Employers!

Join the Otis family where collaboration, innovation, and empowerment help each individual and the company reach new heights.

About you

You will be responsible for installing, maintaining, repairing, and inspecting elevators and escalators. You will also ensure the safe and efficient operation of these systems, troubleshoot mechanical and electrical issues, and perform routine maintenance tasks to prevent breakdowns. This role requires a strong understanding of mechanical and electrical systems, as well as a commitment to safety and precision in their work. This position reports to the Service Engineer for Singapore.

Your key responsibilities

• Responsible for carry out servicing of elevators, escalators and mechanical-parking systems that includes checking, oiling, greasing, mechanical adjustment, trouble-shooting, testing of safety devices, inspection and parts recommendation and replacement, in accordance to code of practice.
• Demonstrate understanding of Environmental, Health and Safety (EH&S) procedures and comply accordingly on the job.
• Attend to breakdown maintenance calls at various job sites.
• Support Service Operations Team to achieve department objectives on service sales targets and service quality standards.

Your Requirements:

• Diploma, Higher Nitec or Nitec level.
• Relevant work experiences on service and maintenance of elevators and escalators will be an advantage but not a must.
• Team player and willing to learn on the job.
• Candidates who possess a valid Class 3 or 3A driving license will be advantageous.

We offer :

• Trainings to transition into this role and succeed
• Excellent base salary, AWS, Performance Bonus and Allowances
• Medical benefits for employee and immediate family
• Career progression that helps to plan and proceed with the great future
• Work Life balance

Do you know someone at OTIS?

If Yes, let's get them to submit your interest as a Referral to this position. Tell them about this role!

About OTIS

Otis is the world’s largest elevator and escalator manufacturing, installation, and service business. We serve customers in over 200 countries and territories around the world and maintain more than 2 million elevators and escalators globally.

Otis has more than 69,000 employees, including engineers, digital technology experts, sales, and functional specialists, as well as factory and field technicians.

We are proud to be a global team that continues to rise to the challenges of a fast-moving, high-performance company. Together, the people of Otis are creating new ideas and opportunities by collaborating across time zones, geographies, and cultures to better serve our customers. So just imagine where you can take your career!

Great working location walking few steps from Sengkang Mrt

We work in a small team, good welfare and management

Roles and Responsibilities

Trained in manicure n pedicure services.

Excellent in Nail Art

Positive attitude and willingness to learn

Pleasant and cheerful personality

• Assess the condition of clients' nails, provide recommendations for nail care and treatments, and educate clients on proper nail maintenanc
• stay updated on the latest nail care techniques, trends, and products
• Build and maintain a loyal clientele by providing exceptional customer service work closely together and building relationships
• Handle customer inquiries and concerns in a professional and timely manner

Group commission

The technician to be trained to perform basic on-line leak sealing of pipeline components, report directly to the operation manager during the on-job training (OJT) period. Trainee technician will be sent to attend Safety Course and trained to work in the Petrochemical OEM environment in Jurong Island or mainland Utilities, Pharmaceutical and the general manufacturing industries.

Preventive Maintenance Technician- Troubleshoot, repair and maintain food production equipment- Execute emergency breakdown protocols- Assist in resolving downtime issues- Clean equipment and maintain equipment hygiene requirements for production use, after installation and/or repairs- Collate and coordinate maintenance work, at times need to work with contractor- Comply with cleanliness and safety regulations while setting up and maintaining food manufacturing equipment- Able to perform ad-hoc duty when require- Basic electrical and refrigerator knowledge- Prepare maintenance reports/records in relation to the work assignedRequirements- Minimum 1 Year of experience in maintenance work and engineering field, preferable in food manufacturing- “O” leave / NTC3 or NITEC in Mechanical Enginnering- Able to performance Shift- Willing to learn new skills- Positive work attitude

Singaporeans or PR ONLY

Experienced AV Technician and driver

Singapore class 3 (Manual) driver license and driving experience required

Job Highlights

===========

Full Time position. Part-time positions also available.

Opportunity to upskill and learn new things. Career advancement

Opportunities to try out and be exposed to new technologies

Casual environment

Roles & Responsibilities include but not limited to:

======================================

- Follow arrangements and company standard procedure.

- Safely transporting audio visual equipment to specified locations in a timely manner.

- Assisting with the loading unloading packing and setup of TV and speakers.

- Ensuring that the company vehicle is always parked in areas that permit parking in order to avoid towing / fines.

- Ensuring safe driving at all times and not tail-gating vehicles in order to avoid accidents and damages to the delivery vehicle.

- Keeping the company vehicle clean and properly maintained by performing regular washing, cleaning and vehicle maintenance.

- Reporting any accidents and vehicle damage to management.

- Good working attitude and communication skills

- Able to work OT

- Setup TV

- Setup Speakers and other AV equipment

- Lay cables in a neat manner

General Requirements

==================

- Singaporeans or PR ONLY

- Experienced AV Technician and driver

- Singapore class 3 (Manual) driver license and driving experience required

- Highly responsible, punctual and good time management

- Attention to details and well organised

- Good team player with service-oriented mindset

- Experience setting up sound system, digital and analog audio mixer, LED video wall and other AV equipment will be ideal

- Work at height certification will be ideal

- Versatile, willing and flexible to take on broad spectrum of tasks and new tasks

- Adaptable to changes, stress and last minute requirements

- Positive, can do attitude

- Calm and level headed

- Good problem solver

Benefits:

• MNC, 5 days, North
• Salary: $2000 - $3000, allowances
• 12hr rotating shifts: 9pm to 9am/9am to 9pm
• 14-15 working days per month
• Overtime claim, AWS, performance bonus
• No experience can apply
• North/Central

Job responsibilities:

• Provide service and support for Vertical probe cards
• Liaise with customers and factory on the card issues
• Compile of investigation report/tracker/monthly report
• Support for DOE (design of experiment) or evaluations either by customer or company’s initiative
• Pin replacement onsite
• Station at client’s site

Requirements:

• Minimum Nitec in Electronics/Mechatronics
• 1 to 2 years of relevant experience in semiconductor industry
• Candidates with no experience can apply
• Possess basic electronics and troubleshooting skills
• Able to start within short notice

Interested applicants, please send your resume to [email protected]

Job Overview:

We are seeking a skilled Calibration Technician to join our team. The successful candidate will be responsible for maintaining and calibrating automated PLC control panels, skid systems, and various instruments. The Calibration Technician will play a crucial role in ensuring the functionality and accuracy of instrumentation equipment, contributing to the overall efficiency of the organization.

Responsibilities:

1. Calibration and Testing:Conduct calibration, testing, and commissioning of automated PLC control panels and skid systems.
   Perform line checking, loop checking, and input-output checking using Process Meters.
   Repair, test, and troubleshoot faulty instruments, ensuring adherence to scheduled timelines.
   
2. Installation and Commissioning:Install, test, and commission new instrumentation equipment.
   Conduct air tube testing, termination on both field and panel, and ensure compliance with safety standards.
   Inject digital and analog signals (4-20mA, 0-20mA, and digital signals) as part of commissioning procedures.
   
3. Documentation:Prepare comprehensive documentation for all calibration, testing, and commissioning activities.
   Maintain accurate records of work performed, instrument status, and calibration schedules.
   
4. Professional Experience:Minimum of [X] years of experience as a Calibration Technician.
   Familiarity with designing software such as Pro-E, In CAAD centre.
   Completion of safety courses in building construction supervision and oil/petrochemical industry safety for supervisors.
   

Qualifications:

• Diploma in Instrumentation & Control Engineering from a recognized institution or ITE Graduate.
• Relevant certifications in calibration and instrumentation.
• Strong understanding of automated PLC control panels and skid systems.

Skills and Abilities:

• Proficient in using Process Meters and other calibration tools.
• Excellent troubleshooting skills for identifying and resolving instrument faults.
• Detail-oriented with strong organizational and documentation skills.
• Ability to work independently and collaboratively within a team.
• Good communication skills and a commitment to safety protocols.

Job Description

To carry out repair & maintenance and electrical works

Requirements

• Minimum NTC 2/3 in electrical or equivalent
• Min 2 years hands on experience in maintenance and electrical work
• Possess good interpersonal, supervisory skill and initiative
• Independent and able to work under pressure
• Mature and outgoing

If you wish to be part of our DYNAMIC TEAM, click APPLY BUTTON NOW!

We regret that only shorlisted canndidates will be notified.

Thank you!

Job Description

• To carry out repair & maintenance and electrical works

Requirements

• Minimum NTC 2/3 in electrical or equivalent
• Min 2 years hands on experience in maintenance and electrical work
• Possess good interpersonal, supervisory skill and initiative
• Independent and able to work under pressure
• Mature and outgoing

If you wish to be part of our DYNAMIC TEAM, click APPLY BUTTON NOW!

We regret that only shorlisted canndidates will be notified.

Thank you!

1. MUST HOLD ANY DIPLOMA OR DEGREE IN ANY MANNER IN A RECOGNISED UNIVERSITY/BOARD

2. MUST HAVE A MINIMUM OF 5 YEARS OF EXPERIENCE IN THE CONSTRUCTION SECTOR

3. MUST BE FLUENT IN ENGLISH.

4. SHOULD COOPERATE FOR OVERTIME WORKING IF NECESSARY

5. SHOULD FOLLOW SUPERIOR'S INSTRUCTION TIME TO TIME

6. SHOULD BE FAMILIAR WITH SINGAPORE ROAD ROOTS

7. SHOULD HAVE CLASS 3/3C DRIVING LICENCE

8. SHOULD OBEY THE COMPANY RULES AND REGULATIONS

9. SHOULD BE READY FOR LOADING AND UNLOADING

10 SHOULD BE ABLE TO HANDLE THE SITE INDEPENDENTLY

• Perform routine preventive maintenance tasks and calibration as per standard operation procedures.
• Carry out fault troubleshooting and equipment failure recovery.
• Review, update and maintain R&M inventory to ensure necessary parts are readily available for repair and maintenance.
• Monitor operation and performance of facility equipment on a daily basis and make adjustments as needed. Eg: HVAC, Air compressor, BMS system, DI water system, UPS.
• Coordinate and supervise contractors to ensure necessary services are provided and meet Company standards.
• Support and execute Capex project to realization.
• Mentor and provide guidance to junior technicians.
• Receive the appropriate training and contribute as a Company Emergency Response Team (CERT) member.
• Perform other duties as specified by Management.
• Be aware of the quality policy and contribute to achieving quality goals by following all related procedures and work instructions. And by doing so adhere to the requirements of the ISO 9001 standard applied within the company, where applicable.
• Practice safe working habits, follow all IDT safety policies, perform safety checks on equipment and systems, and identify, correct, and report potential safety hazards.

• Manage Audio Visual Lighting System (AVLS) and Digital Audio Recording Transcription (DART) for event functions
• Setting up of meeting rooms
• Daily routine check and testing of AV equipment before and after each event
• Daily routine check on cleanliness in meeting, training and function rooms
• Operate AV equipment and provide technical advice related to audio-visual equipment
• Assist with logistics set up for all events
• Perform onsite fault diagnosis and coordinate with product suppliers to resolve technical issues related to video conferencing and audio-visual integrated solutions
• Maintain an updated individual fault record for all fault escalated to the product suppliers
• Any other ad-hoc duties as and when assigned

Requirements:

• Diploma in Electronics/ Audio Visual related discipline
• Minimum 2 years of relevant experience with knowledge in managing the setup of AV systems
• Good interpersonal and communication skills
• Able to work independently
• Willing to work fixed 5.5 days work week
• Has a good safety mindset and display good WSH behaviour

Benefits:

• MNC, 5 days, North
• Salary: $1700 - $2500, allowances
• 12hr rotating shifts: 9pm to 9am/9am to 9pm
• 14-15 working days per month
• Overtime claim, AWS, performance bonus
• No experience can apply
• North/Central

Job responsibilities:

• Provide service and support for Vertical probe cards
• Liaise with customers and factory on the card issues
• Compile of investigation report/tracker/monthly report
• Support for DOE (design of experiment) or evaluations either by customer or company’s initiative
• Pin replacement onsite
• Station at client’s site

Requirements:

• Minimum Nitec in Electronics/Mechatronics
• 1 to 2 years of relevant experience in semiconductor industry
• Candidates with no experience can apply
• Possess basic electronics and troubleshooting skills
• Able to start within short notice

Interested applicants, please send your resume to [email protected]

Job Description:

• Perform welding repair and assembly of aircraft components with gas tungsten arc welding/ tungsten inert gas processes
• Use measuring instruments such as gauge blocks, height gauges, dial indicators and callipers to examine components
• Perform various jobs such as cutting, grinding, sheet metal and assembly works with hand or power tools which include portable riveting guns, squeezers, abrasive tools and torque wrenches
• Meet repair production schedule and delivery requirements
• Suggest new tooling design and modification to existing tooling when required
• Participate in cost control initiatives and continuous improvement projects/ events
• Perform other duties as assigned

Requirements:

• NITEC or equivalent qualification
• Minimum 3 years of working experience in welding aircraft alloy material or in tungsten inert gas/ gas tungsten arc welding. On the job training will be provided for candidates who does not possess relevant working experience.
• Able to read and follow Repair/OEM specifications
• Able to perform rotating shift work, and support overtime, if required
• Open to cross-training and multi-tasking

Responsibilties:

• Responsible for set up and operate CNC & NC Machine according to production schedule and meet all specification requirement
• Perform simple trouble shooting, basic daily machine maintenance and maintaining 6S housekeeping
• Read, interpret & execute various machining works using CNC and NC vertical/ horizontal lathe involving milling, turning and grinding per the engine manual requirements
• Meet tight and demanding repair production schedule & delivery requirements
• Suggest new tooling design & modification to existing tooling when required
• Participate in cost control initiatives & continuous improvement projects/ events
• Perform other duties as assigned

Requirement:

• Minimum NITEC or equivalent qualification
• Minimum 3 years of working experience in aviation repair involving CNC & conventional machining (milling, turning and grinding)
• Able to work rotating shifts
• Proactive to cross-training and multi-tasking
• On the job training will be provided

Job Description

Responsibilities

• Track, monitor and analyze utilities consumption and plan for facilities capacity upsize with respect with scenario ramp.
• Carry out system capacity study to meet Manufacturing requirement
• Able to evaluate and supervise Mechanical modification or enhancement projects.
• Supervise improvement/upgrading/new projects for mechanical system and able to work with and lead respective contractors to complete mechanical jobs effectively to ensure maximum uptime and reliability of the Mechanical systems.
• Able to work with cross functional team effectively in driving projects or troubleshooting.
• Review work procedures and highlight activities which may cause interruptions.
• Provide technical support to Operations and Maintenance team in solving complex mechanical and water systems issues.
• Perform troubleshooting and rectification work independently, applying basic theories and principles to prevent repeat and interruptions.
• Basic understanding of relevant building and mechanical regulatory standards/codes.
• Be aware of and perform all work in accordance with company safety guidelines. Good communication and collaboration within Facilities Sections and with all customers throughout the organization

Requirements

• Understanding of Mechanical system design in Semiconductor industry including its associated equipment’s working principles (e.g. HVAC, exhaust systems, scrubbers, process cooling water, chillers, boilers, cooling towers, pumps, fans, etc) is preferred.
• Diploma in Mechanical Engineering or any related field of study
• Minimum 3 year experience in Mechanical Engineering with a focus on design and construction of Semiconductor Mechanical Systems
• Ability to prioritize and schedule workload and work on multiple tasks concurrently
• Good organizational skills and willing to learn
• Excellent communication skills and good team working skills
• Self-motivated worker
• Familiarity with semiconductor manufacturing and facilities systems
• Strong ability in English speaking and writing

Responsibilities:

• Test and troubleshoot instruments, components, and assemblies, using circuit testers, oscilloscopes, or voltmeters
• Test electrical equipment or systems to ensure proper functioning
• Carry out schedule servicing, and troubleshooting and defect rectification on military aircrafts
• Inspect parts from suppliers conforming to stated specifications
• Keep records of maintenance and repair work. Maintain repair or maintenance records
• Order supplies, equipment, materials and parts for repairs and general maintenance
• Keep detailed records of the inspections performed, repairs finished, maintenance procedures and ordered parts
• Support daily production and deployable to outstation project works when necessary
• Complete all tasks in the allotted time frame and to the quality standards of our company
• Promote safety within the workplace by monitoring others and yourself to guarantee all tasks are performed within the safety manual guidelines, and communicate with other mechanics and supervisors to coordinate repairs and keep apprised of safety concerns

Requirement:

• Min NITEC/Higher NITEC/Diploma in Aerospace Avionics/Aerospace Engineering or equivalent OR
• Min NITEC/Higher NITEC/Diploma in Engineering with Aerospace work experience
• Able to work rotating shift
• Singaporeans only

Job Description:

• Perform repair processes such as plasma spray, water jet, shot peening, heat treatment, cleaning, masking, blasting, sheetmetal etc
• Meet repair production schedule and delivery requirements
• Participate in cost control initiatives and continuous improvement projects/events
• Any other duties as assigned

Requirements:

• NITEC or equivalent, preferably with experiences in the component overhaul/repair industry
• Knowledge and skills in any repair process, e.g. plasma spray, water jet, shot-peening, heat treatment etc
• Able to perform rotating shift work, and support overtime, if required

• can work on publick holidays
• can work on shifts/change of shifts
• can work and stand for long hours
• at least 10 years experiences
• 
  
• Provide overall supervision of production activities.
• Plan, organize and lead a team of production workers to achieve production target and output, cycle time, and yield.
• Improvement in maintaining product quality and productivity. Provide a guideline to check on processes thereby assuring that work is done by the operators.
• Monitor the daily efficiency status of the line.
• Ensure good housekeeping and safety at the workplace.
• Oversee hiring and training of food production personnel
• Perform other duties as assigned.

Responsibilities:

• Perform troubleshooting, assist in investigation and resolving production issues
• Identify and implement continuous process improvement and cost control initiatives
• Trending for process parameters
• Manage capability setup for new equipment and processes
• Carry out tolling review and control and submission of capability declaration
• Handle proper documentation for publication review, worksheet amendments and in-house specifications amendments
• Provide technical support to Operations, ensuring productivity efficiency
• Review, investigate and provide solutions to issues raised by Operation
• Carry out training on repair processes and any other related practices

Requirements:

• Degree or equivalent, preferably with experiences in propulsion engines and components MRO facility
• Ability to interpret engineering drawings
• Prior experience in repair processes will be an added advantage
• Familiar with NDT requirements and FAA 45 /EASA 145 regulations

Responsibilities:

• Install and configure equipment on data center racks (servers, switches, routers, firewalls).
• Replace components in existing hardware (mainboards, CPUs, RAM, HDDs/SSDs, network modules, transceivers, cables).
• Conduct patching of fiber optics and Ethernet cables, ensuring accurate connections.
• Maintain tidy cable management for efficiency.
• Prepare servers for operation (OS installation, network/firewall config, application installation).
• Perform operational and maintenance tasks (cable tests, equipment power cycling, console interface setup for remote access).
• Troubleshoot issues (ping/traceroute, hardware tests, generate logs for vendor escalation).
• Manage inventory and ensure proper asset tracking.
• Enforce data center processes, access control, and compliance with rules and regulations.
• Escort external vendors to ensure premises security.

Requirements:

• Min Nitec in Computer Science, Information Technology or related disciplines
• Candidate with no experience is welcome to apply, training will be provided
• Proficient in equipment installation and troubleshooting.
• Strong knowledge of data center operations.
• Excellent organizational and communication skills.

I regret to share that only shortlisted candidates will be notified.

www.dadaconsultants.com

EA Registration Number: R21100604

Data provided is for recruitment purposes only

Business Registration Number: 201735941W.

Licence Number: 18S9037

Benefits:

• MNC, 5 days, North
• Salary: $1700 - $2500, allowances
• 12hr rotating shifts: 9pm to 9am/9am to 9pm
• 14-15 working days per month
• Overtime claim, AWS, performance bonus
• No experience can apply
• North/Central

Job responsibilities:

• Provide service and support for Vertical probe cards
• Liaise with customers and factory on the card issues
• Compile of investigation report/tracker/monthly report
• Support for DOE (design of experiment) or evaluations either by customer or company’s initiative
• Pin replacement onsite
• Station at client’s site

Requirements:

• Minimum Nitec in Electronics/Mechatronics
• 1 to 2 years of relevant experience in semiconductor industry
• Candidates with no experience can apply
• Possess basic electronics and troubleshooting skills
• Able to start within short notice

Interested applicants, please send your resume to [email protected]

Responsibilities

• Carry out repair, perform maintenance checks and modification of the full range of aircraft structural components and body structures
• Inspect defects and determining the repairs required
• Fabricate airframe sheet metal parts, service aviation, subsystem assemblies’ components and perform operational checks to ensure aircraft is in line with regulations and safety requirements
• Identify, remove and manage aircraft corrosions while ensuring aerodynamics smoothness

Requirements

• Min NITEC/Higher NITEC/Diploma in Engineering
• Knowledge in repair work (component repair/sheetmetal structure) will be an advantage
• Able to use precision equipment/tools/machinery
• Work location: North (nearest MRT: Yishun/Bukit Panjang)
• Singaporeans only