JOB RESPONSIBILITIES

· Follow standard operating procedures (SOPs) to accurately prepare, dispense pharmaceutical raw materials and ingredients in the correct quantities.

· Record and document manufacturing data, including dispensing data, logbook, cleaning record and other relevant information.

· Perform daily cleaning of the dispensing room, including surfaces, equipment, and storage areas, following established cleaning procedures SOP and protocols. Ensure that all workspaces are kept clean and organized to maintain a ISO clean room class 8 environment for pharmaceutical processes.

· Monitor and maintain dispensing device performance to ensure proper functioning and calibration.

· Adhere to safety protocols and procedures to protect yourself and others in the dispensing environment.

· Work collaboratively with other team members to ensure smooth and efficient operations.

· Report any issues, deviations, or incidents to supervisors or relevant personnel for prompt resolution.

· Participate in training programs and Adhere to Good Manufacturing Practices (GMP) guidelines and regulations related to cleaning and dispensing in pharmaceutical manufacturing.

·To carry out any other duties assigned by your immediate superior.

Preventive system maintenance

- Hydraulic/Mechanical/Electrical support (Setting up, troubleshooting, repairs and construct)

- Support R&D activities to develop, fabricate and build/upgrade new/existing ROVs

- Support data recording activities on jobs

- System launch and recovery

- Ability to work outdoors on-board ships, possess a level of physical fitness appropriate to the job requirements, and able to work irregular shifts hours (when required) based on operations schedules.

- To assist with ROV operations as instructed and in accordance with approved procedures and policies.

- To perform remote vehicle and possess positive, hands-on systems maintenance, electrical, mechanical and hydraulic repair of the ROV and various ancillary systems

• Shipyard working environment
• Knowledge on Marine and deck machinery service
• Hydraulic Pump and Hydraulic Motor service and testing knowledge
• Team work
• Willing to travel overseas at short notice
• Service report writting
• Communicating with customer
• Service work at workshop
• Workshop maintenance and tools keeping

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Responsible to set-up and operate CNC Machine Milling, Lathe

• Able to perform simple programming (For CNC machines only)

• Conduct first piece inspection

• Report to management in the event of non-conformance of components

• Adhere to good quality, housekeeping, and safety practices

• Perform 5S

Detailed

• Perform duties assigned by Engineering

• Check Routing Sheet details against drawings are correct before machining

• Maintain good housekeeping in the areas of work

• Always follow Company’s safe working practices and requirements

• Comply with safety measures and practices of the Company

• Report any unsafe conditions and practices to Production Superintendent or Engineering Assistant

• Ensure that a machining and inspection procedure is compiled to meet Quality Management System requirements and Quality Objectives

• Ensure adherence and compliance of the Quality Management System and achieve Quality Objectives

• Check raw material dimension before machining commencement

• Carry out the day-to-day machining operation in accordance with Routing Sheet and required date

• Perform 100% in-process inspection and recording inspection result

• Identity any non-conformance product and inform the problem to Production Superintendent or Engineering Assistant

• Check and report raw material defects / non-conformance before commencement

• Proper handling and usage of inspection devices and production machines/equipment

• Ensure job piece set-up and machining operation is in accordance with Routing Sheet and drawings

• Constant check on machining process and carry out in-process inspection to control the dimension according to customer requirements

• Maintenance and account for the inspection devices and tools issued for use

Requirements

• NTC 2 or 3 in Precision Engineering or equivalent

• Minimum 2 years of relevant experience

• Able to operate Fanuc Controller

• Experience in the machine applied for will be an added advantage

• Trainee positions available for interested parties without experience

• Able to read & interpret technical drawings

• Capable of using measuring instruments - Micrometre, Bore Gauge, Profile Projector

· Must be able to work night shift and split shift

· Must be able to work extra hours or weekend if needed

Job Description:

1. Carry out maintenance, repair and overhaul work on heavy vehicles, has diagnostic capability and able to perform major repair on engine and transmission

2. Ensure high standard of workmanship and minimize turnaround time for scheduled repairs and inspections to meet workshop’s service standards and according to job order.

3. Notify Team Leader of unusual repair problems which will require major repair and replacement parts recommendation.

4. Complete work order for each vehicle and unit serviced.

5. Adhere to defined guidelines in regards to safety, orderliness and etc.

6. Performs ad hoc duties as assigned by Superiors

Job Requirements:

1. Academic qualification: NTC 2 / Diploma Automotive Technology or equivalent

2. Competent in basic English (verbal & written)

3. Prefers candidates with at least class 3 driving license

4. Prior experience of at least 2 to 3 years in performing automotive service repair (commercial vehicle)

The job scope includes:

• Support laboratory operations by maintaining cleanliness, organization, and functionality of laboratory equipment and workspaces.
• Assist in conducting experiments, tests, and analyses under the supervision of laboratory staff.
• Procure laboratory supplies, equipment, and materials in accordance with project requirements and budgetary guidelines.
• Coordinate with vendors and suppliers to obtain competitive pricing and ensure timely delivery of procurement orders.
• Maintain accurate records of inventory levels, procurement transactions, and supplier information using designated software or systems.
• Assist in the development and implementation of procurement strategies to optimize cost-effectiveness and efficiency.
• Collaborate with laboratory personnel and project teams to identify procurement needs and recommend suitable products or solutions.
• Monitor and track the usage of laboratory consumables to prevent stockouts and minimize wastage.
• Adhere to safety protocols and guidelines while handling hazardous materials and operating laboratory equipment.
• Assist in other laboratory-related tasks and projects as assigned by supervisors or management

COMPETENCIES AND QUALIFICATION REQUIREMENTS

• Candidate must possess at least a Secondary School/Professional Certificate/NITEC, Diploma, Advanced/Higher/Graduate Diploma/Degree, any field.
• At least 1 year(s) of working experience in the related field is required for this position.
• Preferably Junior Executives or fresh graduate.
• Good communication skills and able to communicate with suppliers and internal department well.
• Excellent negotiation skills for best material/equipment/service pricing and payment terms from suppliers.
• Be driven, responsible, organized, independent and able to handle stress well.
• Able to learn fast, high attention to detail, and able to multi-task
• Basic Skills required: Proficient in Microsoft Office applications and multilingual skills (English & Mandarin)
• Possess positive working attitude, punctual, initiative and able to work productively under minimal supervision.
• Able to work under pressure and minimum supervision.
• Able to start immediately or at short notice is a plus.
• Able to work from 1:00pm - 10:00pm

ABRIDGED VERSION OF JOB DESCRIPTION AND REQUIREMENTS

We are looking for a focused and highly motivated individual to contribute to a dynamic and growing team. This team focuses on the fabrication of next-generation photovoltaic technology in our flagship project.

We regret that only shortlisted candidates will be notified.

Responsible for the efficient operation and oversight of Automated Storage and Retrieval Systems (ASRS) equipment to facilitate the storage, retrieval, and movement of materials or products within a warehouse or distribution center. This role involves executing tasks according to established procedures, monitoring system performance, and ensuring compliance with safety and operational standards.

Responsibilities:

1. Operate ASRS equipment, including automated cranes, conveyors, and control systems, to perform material handling tasks such as loading, unloading, and storing goods in designated locations.
2. Follow maintenance schedules and perform routine inspections and preventive maintenance tasks on ASRS equipment.
3. Follow standard operating procedures (SOPs) for operating ASRS equipment, including startup and shutdown procedures, equipment inspections, and safety protocols.
4. Monitor system operation through computerized interfaces or control panels, and respond promptly to alarms, error messages, or abnormal conditions.
5. Ensure smooth operation with the aid of warehouse control system (WCS) and Humane Machine Interface (HIM).
6. Perform routine checks and visual inspections of ASRS equipment to identify signs of mechanical, electrical, or operational issues, and report any anomalies to maintenance personnel or supervisors.
7. Collaborate with warehouse or inventory control personnel to prioritize workload, optimize storage space utilization, and fulfill orders in a timely manner.
8. Adhere to safety regulations and company policies by wearing personal protective equipment (PPE), following safe work practices, and participating in safety training programs.
9. Assist maintenance team during equipment maintenance, repair, or troubleshooting activities by providing operational insights, performing equipment checks, and coordinating equipment downtime as needed.
10. Communicate effectively with team members, ASRS operation engineer, and other departments to coordinate workflow, resolve issues, and ensure smooth operation of ASRS systems.
11. Participate in training sessions or refresher courses on ASRS operation, safety procedures, and best practices to enhance job performance and skills development.

Qualifications:

• High school diploma or equivalent; additional technical training or certification in warehouse operations, material handling, or ASRS operation is a plus.
• Previous experience in operating automated material handling equipment, such as ASRS, conveyor systems, or forklifts, preferred.
• Basic understanding of warehouse operations, inventory management principles, and supply chain logistics.
• Ability to operate computerized systems and software applications for data entry, inventory tracking, and system monitoring.
• Strong attention to detail, accuracy, and reliability in performing tasks and recording inventory transactions.
• Excellent communication skills, both verbal and written, with the ability to follow instructions and collaborate with team members.
• Physical stamina and dexterity to perform manual tasks, including lifting, bending, and standing for extended periods.
• Willingness to work in a fast-paced environment, adapt to changing priorities, and work flexible hours, including weekends or evenings, as required.

Basic Information

• 5 Days : 8am - 5.15pm
• Basic up to $3.3k
• Working location at Joo Koon

Job Responsibilities:

• Inspect, maintain, and repair material handling equipment (e.g., cranes, hoists) at customer sites.
• Conduct post-service reviews with customers.
• Utilize company digital tools for work and customer interactions.
• Identify sales leads and opportunities for improvement.
• Complete accurate, professional service reports promptly.
• Maintain company equipment, vehicles, and assets in safe, operational condition.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified**

Zen Career Pte Ltd | 24C2559
Wong Kaili (Kylie)| R21100484

Job scope:

• Perform daily production activities including process monitoring and field checks
• Operate all production chemical processing equipment (ie pumps, boilers, DCS, etc)
• Maintain and record accurately in production documents (eg Work Order)
• Assist Production Supervisor to perform field work in order to meet production schedule
• Attend and contribute for production training matters
• Participate and respond to the certified emergency response team

Beneficial:

• Forklift, work-at-height, confined space, firefighting and hazmat

Requirements:

• Willing to work in shifts (8am to 4.30pm OR 1.30pm to 10pm)

Benefits:

• 5 days work week
• Shift allowances

Reporting to the Technical Officer and Senior Maintenance Supervisor, this role is responsible for preserving the good condition and functionality of the school premise. This includes maintenance and repair of electrical, plumbing, ventilation works and other building systems.

Responsibilities:

• Survey buildings and repair mechanical systems to ensure consistency with health and safety standards.
• Check work orders via the ticketing system daily and take on assigned work activities accordingly. This includes setting up and tearing down of events location.
• Ensure scheduled inspections, maintenance and repair work are conducted regularly and properly recorded. This includes the buildings (e.g. landscaping, painting, carpentry, pest control etc), equipments, electrical systems (e.g. replacing light bulbs/sockets, cleaning and repairing circuit breaker panels etc), alarm systems (e.g. fire and protection), plumbing systems and manual repairs (e.g. fixing of locks, replacing of windows etc).
• Maintain the air conditioning and plumbing systems to ensure functionality.
• Ensure emergency repairs are attended to promptly and efficiently.
• Maintain the inventory (e.g. tools and materials) in a tidy and appropriate manner.
• Undertake any other duties as assigned by the Senior Maintenance Supervisor and/or Technical Officer.

Requirements:

• Nitec in Engineering or equivalent
• Minimum 2 years’ experience working in maintenance
• Good knowledge in general maintenance processes and methods
• Basic understanding of electrical, hydraulic and other systems
• Able to carry load of up to 25kg.

Please note that only shortlisted candidates will be contacted.

Roles & Responsibilities

Technician Responsibilities:

• Inspecting, analyzing, and troubleshooting systems and equipment.
• Carry out troubleshooting and minor repairs to building works and M&E works including air-conditioning, electrical, plumbing and fire protection system.
• Involved in coordination and supervisor of construction works
• Responsible for planning, managing and ensuring smooth implementation and monitoring of projects assigned
• Responsible for effective site management which include safety inspection and quality control of materials and plants on site
• Required to plan, lead and monitor progress and performance against the project plan whilst managing the day-to-day operational aspects of projects which includes manpower planning, construction progress monitoring, preparation of master schedule and cost control.

Technician Requirements:

• Any Degree
• Experience as a technician.
• Ability to multitask and liaise with professionals in different fields.
• Ability to explain problems simply and clearly.
• Proficiency in MS Office.
• Ability to understand verbal and written instructions.
• Ability to follow health and safety regulations.
• Excellent mathematical and problem-solving skills.

Position Overview

The candidate will assist the Maintenance Supervisor to conduct preventive maintenance, troubleshooting & repair of CNC machines and update maintenance records regularly.

Job Responsiblities

• Preventive maintenance and calibration of the machines according to the checklist
• Analyse machine problems and repair
• Update and maintain maintenance records and forms regularly
• Any other ad-hoc maintenance activities such as maintaining coolant and lubrication of machines
• Perform other duties and responsibilities, as assigned.

Position Requirements

• Minimum 3 years of hands-on experience in maintenance and repair of CNC metal cutting machines
• Good knowledge in Electrical and Mechanical aspects of CNC Machines
• Able to read the PLC

* This is a 1 year contract role (subject to extension/conversion) *

Key responsibilities:

• Perform hands-on mechanical/electrical assembly tasks within the standard time
• Ensure that the assembled machine is according to Makino's quality standards
• Responsible for keying the operation time into EES for performance measurement
• Responsible for housekeeping and ensuring that the assigned machine area is clean and tidy
• Carry out duties in according with Quality Policy, EHS control procedures and WIS
• Ensure that all machine tools and instruments are properly calibrated and taken care of

Job requirements:

• Minimum NITEC/Higher NITEC in Mechanical/Electrical Engineering, or a related field
• Experience working in Assembly/Production is an added advantage
• Able to work shifts and commit to overtime on weekdays and weekends when required
• Able to handle physical work and stand for long hours
• Able to read and interpret drawings
• Have the initiative to learn and produce quality outcome
• Responsible and committed to the assigned task
• Team player and able to work independently

• ITE in Mechanical Engineering or equivalent
• Good technical Knowledge on Mechanical or Electrical and Instrumentation
• Hands-On experience on Pumps (Centrifugal, gear pumps, etc.) and Motors
• Customer service oriented
• Independent and proficient in basic writing skills
• Class 3 driving license is a plus
• Relevant working experience in pumps servicing/repair

Benefits:

• 14 days of annual leave per year. Prorated based on join date.
• Variable bonus.
• Meal allowance.
• Annual health screening.
• Dental reimbursement.
• Hospitalisation insurance.
• Specialist treatment coverage.
• Annual allocated training hours for each employee.

Responsibilities:

• To adhere to prevailing Company SOPs including service KPIs.
• To carry out indoor and outdoor service jobs (commission, repair, troubleshoot, inspection, modification, warranty checks).
• To investigate customer complaints (product defects, failures or non-conformance) and recommend solutions.
• To issue customer outdoor and indoor service reports.
• To disassemble cancelled units for stock return.
• To provide service and maintenance training sessions on product usage for customers.
• To perform routine maintenance and repair work on inverters and gear motors.
• To report discrepancies if any.

Requirements:

• ITE (Mechanical Engineering) with 1 year of relevant work experience.
• Basic proficiency in English (both written and spoken) is mandatory.

Work Conditions:

• Must be comfortable working outdoors in order to repair and service inverters and gear motors.
• Must be willing to be on standby for after office hours for service activiation, with OT payment.
• Must be willing to commute to clients' site for servicing. Transport reimbursement is provided for commute between the office and client sites.
• Work-at-height is required at some clients' sites.
• Must be open to occasional overseas work on adhoc activation basis.

JOB SUMMARY:

The Engineering Technician is responsible for ensuring the efficient operation of all hotel facilities, systems, and equipment to guarantee guest comfort, safety, and satisfaction. This role requires proactive maintenance, repair work, and troubleshooting to address any technical issues within the hotel. The Engineering Technician will work closely with other hotel departments to support operational needs, uphold safety standards, and ensure that all technical systems function properly, contributing to an overall exceptional guest experience.

WHAT YOU WILL BE DOING:

• Guest and Facility Support:Ensure the smooth operation of all hotel systems, including HVAC, plumbing, electrical, and mechanical systems, for the safety and comfort of guests.
  Respond promptly to guest requests and issues related to the hotel’s facilities, ensuring minimal disruption and maximum satisfaction.
  Carry out preventive maintenance tasks, addressing any technical issues before they impact guests.
  Assist with repairs of guest rooms, public areas, and common hotel facilities, ensuring guest comfort and operational efficiency.
  
• System & Equipment Management:Regularly inspect hotel equipment, including heating, cooling, plumbing, and electrical systems, to ensure proper operation and compliance with safety standards.
  Perform troubleshooting and repairs to hotel systems, machinery, and equipment, identifying and resolving issues quickly and effectively.
  Maintain a clean and organized mechanical room, ensuring all tools and supplies are readily available and properly stored.
  Document maintenance activities, including repairs and inspections, in the Duty Log to ensure clear communication and follow-up on any unresolved issues.
  
• Safety & Compliance:Ensure compliance with all safety protocols, building codes, and hotel standards.
  Respond to emergency situations, including fire alarms, water leaks, or power failures, ensuring a safe and quick resolution.
  Conduct safety checks on all hotel systems and infrastructure to identify and prevent potential hazards.
  Assist in emergency drills and safety training, ensuring the hotel staff is well-prepared for any situation.
  
• Collaboration with Hotel Departments:Work closely with other hotel departments, including housekeeping, front desk, and security, to address maintenance issues promptly and prevent any inconvenience to guests.
  Assist in setting up and maintaining hotel equipment for special events or large group functions as needed.
  Provide technical support to other hotel staff, offering guidance or assistance on maintenance-related tasks when necessary.
  
• Other Operational Duties:Ensure that all hotel vehicles, including buggies and other transport equipment, are properly maintained, clean, and in working condition.
  Recharge and maintain the hotel's buggy fleet, ensuring it is operational and ready for use by guests and staff.
  Maintain a tidy and organized environment in all work areas, ensuring that tools and supplies are stored appropriately.
  Perform other duties as requested by supervisors or hotel management to support the hotel's operational needs.
  

YOUR EXPERIENCE AND SKILLS INCLUDE :

• Strong verbal communication skills, allowing for effective communication with guests and hotel staff.
• Ability to work cohesively with a team, building positive relationships with colleagues and departments.
• A proactive, solutions-oriented mindset, with an ability to stay calm and professional in urgent situations.
• Strong attention to detail and a commitment to providing high-quality service.
• Ability to work in a multi-cultural environment, demonstrating respect and understanding for diverse guest needs and backgrounds.

Qualifications:

• Secondary/High School education required; technical certifications in engineering or maintenance preferred.
• Possess a valid driving license.
• Minimum 1 year of experience in hospitality, facilities management, or a technical role.
• At least 2 years of experience in maintenance, repair, or engineering, with hands-on experience in troubleshooting systems and equipment.
• Previous experience in a hotel or similar service environment is an advantage.
• Knowledge of building systems, including HVAC, plumbing, electrical systems, and mechanical equipment.

Job Description & Requirements

Key Responsibilities :

o Perform routine and preventative maintenance tasks on industrial packaging machines and equipment;

o Carry out repairs, troubleshooting, and maintenance work on mechanical and electrical systems;

o Keep records of maintenance and repair work, including ensure spare parts inventory equipped at all times;

o Maintain a clean and organized work area, adhering to safety and efficiency standards;

o Ensure maintaining spare parts inventory levels and ensuring proper care and protection of maintenance tools and equipment;

o Assist Maintenance Chief to identify and implement continuous improvement initiatives;

o Obtain quotes from suppliers and internet purchases for comparison to achieve the most cost effective solutions while maintaining quality standards;

o Provide weekly updates on the status of ongoing maintenance tasks, servicing issues, and outstanding parts orders.

Requirements :

o Minimum 5 years of experience in maintenance, repair, and troubleshooting of industrial machinery, preferably in a beverage manufacturing environment;

o Diploma, NITEC, NTC-2, or ITC in Mechanical, Mechatronic, or Electrical Engineering;

o Competent in Microsoft Office preferred - outlook, excel, word, and CAD;

o Knowledge of industrial machinery, including packaging equipment, conveyor system, boiler, chiller, compressor and cooling tower etc;

o Familiarity with Electrical motors (AC/DC), Pneumatic and hydraulic systems, Valves and actuators, Pumps, Gearboxes and transmission systems, Sensor technologies (e.g., temperature, pressure, level, flow), Boiler and chiller systems, Water treatment systems, Packaging machinery and Material handling equipment.

Job Description:

1. Using hand welding and flame-cutting equipment to weld together metal components and parts.

2. Cut, trim, modify or scarf metal objects to dimensions, as specified by layouts/works orders.

3. Review layouts, diagrams, or work orders in the preparation for welding or cutting metal components.

Requirement:

1. Minimum 3 years experience.

Able to start work immediately

Benefits:

• Stable career
• Guaranteed PB
• Guaranteed AWS
• Up $2,800

Job Description

• Pack and dispense prescriptions; provide patient counseling on medication use.
• Maintain equipment and ensure a clean, hygienic pharmacy environment.
• Monitor stock levels, check expiry dates, and ensure proper storage of medications.
• Assist with repackaging, conduct quality control, and ensure IT/Automation systems are functioning.
• Perform additional tasks as assigned by the Reporting Officer.

Requirements:

• Diploma graduate in Pharmaceutical Sciences/ Graduates of the Certified Pharmacy Technician Course

Alternatively, you may send your application and resume to [email protected]

**We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by company relating to this job application.

For a faster response, you may contact 6990 0456 via WhatsApp with the following details:
Name:
Position applied:
Location:

Megan Chan Xin Yi
Registration Number: R24123277
EA License No: 06C2859 (MCI Career Services Pte Ltd)

• Conduct routine maintenance work (replacing fluids, lubricating parts etc.) aiming to vehicle functionality and longevity and repair work and report to workshop foreman for necessary technical assistance
• Inspect vehicle computer and electronic systems to repair, maintain and upgrade
• Inspect vehicle engine and mechanical/electrical components to diagnose issues accurately.
• Repair or replace broken or dysfunctional parts and fix issues (e.g. leaks)
• Has Experience in Automotive repairing, repair tyres,engine tune-ups, oil changes, gearbox repair, air-con & system diagnosis
• Any other ad-hoc duties as assigned

Jobs Requirements

• A minimum of 5 years’ experience in a similar role.
• Basic computer skills.
• Able to work independently and with a good working attitude
• Experienced/Responsible/Diligence.
• Strong team spirit.
• Must be able to work night shift and split shift
• Must be able to work extra hours or weekend if needed

The incumbent is responsible to:

• Assist the pharmacist in the processing of medication orders for inpatient and outpatient dispensing which includes typing, packing, labelling and distribution of drug supplies to the wards and other hospital departments
• Perform billing functions and ensure that cost and revenue of all stocks supplied are recovered
• Dispenses medicines under the supervision of a pharmacist
• Monitor and maintain inventory stock level of drugs in the areas of work
• Receive, unpack and check deliveries against the appropriate documents, to ensure that items supplied are correct and accounted for
• Perform stock receipts and issues strictly in FIFO order
• Assist in providing quality customer service
• Maintains the cleanliness of the work areas and prepare these for daily operations
• Assist in orientating new staff assigned to the section
• Supports the hospital by participating actively in the various activities organized by the hospital

Job Requirements:

• Certificate in Pharmacy Technician Course or a Diploma in Biomedical Science (Specialization in Pharmaceutical Science Technology) or Diploma in Pharmaceutical Science and relevant experience
• Able to work staggered shift duties Job

Job Summary:

The ROV Pilot is responsible for operating, maintaining, and repairing Remotely Operated Vehicles (ROVs) and associated systems to support subsea operations such as inspection, maintenance, repair, and construction tasks in offshore environments.

Responsiblilities:

• Operate ROVs to conduct underwater tasks
• Technical Maintenance
• Troubleshoot and repair ROV hydraulic, and mechanical systems.(electrical system will be beneficial)
• Data Collection and Reporting
• Safety and Compliance
• Work closely with other team members

Qualifications and Skills:

· Training will be provided to those without experienced

Education and Certification:

• Diploma or degree in Engineering (Mechanical, Electrical, or related field) or equivalent experience.

Personal Attributes:

• Strong problem-solving and decision-making skills.
• Ability to work under pressure in challenging offshore environments.
• Excellent teamwork and communication abilities.

Work Conditions:

• Offshore assignments requiring extended periods on vessels or rigs.
• Onshore assignments requiring extended periods at anchorages
• Exposure to harsh weather and confined spaces.

About No deviation

At No deviation, we are dedicated to delivering patient-centric solutions that revolutionize the pharmaceutical landscape. As a dynamic expert in engineering consultancy, Commissioning Qualification Validation (CQV), and Quality, Compliance, and Regulatory services, we are looking for individuals who are excited to contribute to impactful projects and drive innovation.

We believe that great things happen when Empathy, Integrity, and Transparency guide our actions. That's why we foster a culture of collaboration, inclusion, and continuous development – empowering our team members to grow personally and professionally.

Position Overview

As a Process Technician, you will support plant operations by assisting with troubleshooting, process optimization, and monitoring processing parameters. Your duties include preparing solutions, staging components for autoclaving, and aiding in production sample testing. You will ensure compliance with GMP, EHS standards, and regulatory requirements, follow procedures, evaluate documentation, and contribute to safety audits while working with internal and external inspectors.

Key Responsibilities

• Play a key role in the hands-on execution of plant operations while providing valuable support to Manufacturing Associates in troubleshooting and resolving issues.
• Monitor and analyze processing parameters to identify trends and uncover opportunities for process optimization and improvement.
• Prepare solutions and equipment, ensuring smooth operation and efficiency.
• Stage components for autoclaving and washing, contributing to the production flow.
• Assist in the testing of production samples and leverage any experience with analytical instruments to enhance process accuracy.
• Actively participate in continuous improvement initiatives, helping to drive operational excellence.
• Contribute to safety audits and ensure that all activities align with industry standards and regulations.
• Ensure strict adherence to EHS, regulatory, and GMP requirements, maintaining a high level of compliance.
• Follow written procedures, quickly recognize malfunctions, and take prompt action to report and resolve issues.
• Evaluate documentation and data in line with company and regulatory guidelines, ensuring accuracy and compliance.
• Engage with internal and external inspectors, maintaining open communication and fostering transparency.
• Apply your knowledge of GMP to ensure the highest standards of production practices.
• Use basic statistical and mathematical skills to analyze data and make informed decisions.
• Effectively organize tasks, manage multiple priorities, and meet deadlines in a fast-paced environment.
• Leverage your understanding of basic chemistry, biology, and physical principles to support various plant operations.
• Have a solid grasp of analytical methods to ensure precision and quality in production.

Required Qualifications

• Diploma in Science or Engineering.
• NTC/ITC/Diploma in Chemical, Pharmaceutical, Life Sciences, or Bio-processing-related disciplines.
• Fresh graduates are highly encouraged to apply.
• Proficiency in reading and writing English.
• Strong commitment to cGMP and EHS compliance in clean-room plant operations (prior experience with cGMP is a plus).
• Knowledge of plant and unit operations (e.g., autoclaves, parts washers, process equipment) and strong problem-solving skills.
• Excellent self-motivated team player with a hands-on attitude and effective communication skills.
• Familiarity with systems like Emerson DeltaV, LIMS, and TrackWise.
• Ability to understand, apply, and evaluate basic chemistry, biology, and physical principles.
• Willingness to work shifts, including 24/7 operations.
• Strong mechanical ability and expertise.

Why join us?

• Generous Leave Policy including Elderly Care Leave for aging family members, reflecting our commitment to family wellbeing.
• Comprehensive Health & Wellness Coverage: Receive robust medical and dental coverage to support your health needs.
• Professional Development Opportunities: Access continuous learning programs and resources for career growth within the company.
• Inclusive Culture: Work in an environment where innovation, collaboration, and diverse perspectives are encouraged and celebrated.
• Shape the Future: Make a real difference in the pharmaceutical industry while advancing your career.

How to apply

Are you ready to play a key role in shaping the future of pharmaceutical solutions?
If you're passionate about making an impact, we want you on our team!

Please submit your resume, outlining your qualifications and experience relevant to the role, here.

Job Description

- Troubleshooting photocopier hardware.

- Break-fix & Proactive Maintenance of photocopiers and printers.

- Software installation of printer drivers and scanners

- Programming WiFi router to connect laptop and printers.

- IT Support (remote and onsite) and customer service

- Onsite - Key operator training and troubleshooting

- Laptop, printer, copier and router setup.

- Delivery and setup of photocopier / printers

Requirements

- Min 2 year experience in similar field

- Network configuration experience

- Remote desktop support experience

- Work from Penjuru (West of Singapore)

- Training will be provided