Summary:

• Preventive Maintenance, semiconductor, cleanroom, jumpsuit
• Basic salary up to $2600
• OT fees
• Attendance allowances $200/month
• Night shift allowances
• Guaranteed AWS
• Performance bonus
• Increment after probation (subject to performance)
• Completion bonus (1 year)
• Location: Kranji
• Work week: 4/3/4/3 (12 hours shift)

Key Responsibilities:

• Perform robot Preventive Maintenance: parts cleaning & greasing, replacement of sensors, motors, motor drivers etc
• Installation of vacuum valves, fore line pipes, heater jackets
• Support tool owner engineer to do technical activities in fab: trouble shoot, modification, installation, de-installation
• Support 6S & logistic activities (parts cleaning, arrangement, labelling, housekeeping)
• Other related ad hoc duties

Key Requirements:

• Min Nitec in engineering
• No experience welcome to apply!

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

• Well Established Company
• Basic $3500 - $4000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: East
• Working hours: Normal Working Hours

Job Responsibilities:

• Carry out maintenance, repair and overhaul work on heavy vehicles
• Conduct service maintenance on trucks, including:
• Power steering diagnostics and repair
• Engine overhaul
• ESCOT control housing, gearbox, and rear axle overhauls
• Advanced multimeter measurements and wiring repairs
• Emission-related system repairs
• Electrical fault tracing, repair, and calibration using Tech Tool
• Carry out mechanical, electrical, and electronic repairs
• Any other ad hoc duties as assigned

Job Requirements:

• Possess minimum Certificate and/or NTC 3/2 in Motor Vehicle Mechanics or NTC 3/2 Heavy Duty Diesel Mechanics or related field with at least 2-3 years of relevant experience
• Possess Class 3 driving license would be an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

Benefits:

• Full training provided

• Completion Bonus + Sign on Bonus + Variable Bonus

• MNC, Great Career Development

Job Scopes:

• Support the maintenance and repair of aircraft systems and components.

• Conduct inspections, troubleshooting, and testing procedures under supervision.

• Service engines, landing gear, hydraulic systems, and avionics equipment.

• Examine aircraft components for signs of leaks, cracks, or damage.

• Maintain, repair, and rebuild aircraft structures, functional components, and parts to ensure optimal performance.

• Assist with additional tasks and duties as assigned.

Job Requirements:

• At least Nitec, Higher Nitec, or Diploma in any engineering related field.

• Candidates with no experience are welcome to apply, training will be provided.

To Apply, kindly click on the "APPLY NOW" button and job details.

We regret that only shortlisted candidates will be notified.

StaffKing Pte Ltd (20C0358) | Tan Pei Xuan (R24124430)

• Conduct sensory evaluation and ensure overall status of incoming and new raw materials (seasoning and liquid)
• Manage the overall QC status of all final products and issue the appropriate type of labels for every final product.
• Perform Glovia transactions for final products to facilitate shipment.
• Issue various documents and reply technical enquiry raised internally or externally (e.g.. by customers).
• Conduct investigations on customers’ complaint samples or rejected items.
• Ensure lab stock is sufficient for lab use.
• Ensure preventive maintenance and external calibration of lab equipment is carried out duly.
• Ensure proper functioning and running of QC laboratories (Chemical, sensory, microbiology, retain sample room) in accordance with ISO9001, 5S, lean principle, ISO14000 and OSHAS 18001 standards and procedures.
• Assist and support in the implementation of continuous improvements in QA/QC functions.

Requirements

• Min Diploma in Fragrance / food science / chemistry
• Min 1 to 2 years of exp / internship in fragrance industry will be an advantage

Up to $3K

Mon to Fri, office hours

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

Summary:

• Preventive Maintenance, semiconductor, cleanroom, jumpsuit
• Basic salary up to $2600
• OT fees
• Attendance allowances $200/month
• Night shift allowances
• Guaranteed AWS
• Performance bonus
• Increment after probation (subject to performance)
• Completion bonus (1 year)
• Location: Kranji
• Work week: 4/3/4/3 (12 hours shift)

Key Responsibilities:

• Conduct regular inspection of machinery to ensure they are in optimal working condition
• Identify and assess wear and tear, and other potential issues
• Perform scheduled tasks such as lubrication, cleaning, replacing and etc
• Update records to track maintenance activities
• Resolve minor problems that can be fixed during preventive maintenance
• Other relevant ad-hoc duties

Key Requirements:

• Min Nitec in engineering
• No experience welcome to apply!

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition.

Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging its sector expertise and global track record.

Sembcorp has a balanced energy portfolio of 21.2GW, with 14.4GW of gross renewable energy capacity across 10 countries*.

Its urban development projects span over 14,000 hectares across Asia and have generated over 377,000 employment opportunities and attracted close to US$50 billion of investment capital.

Sembcorp is listed on the main board of the Singapore Exchange. It is a constituent stock of FTSE Russell Index, MSCI Singapore Index, Straits Times Index as well as sustainability indices including FTSE4Good Index, iEdge SG ESG indices and several MSCI ESG indices.

For more information, please visit www.sembcorp.com.

Purpose and Scope

Carry out inspections as per daily maintenance schedule; attend defects, breakdowns, including the repairing of Mechanical Equipment.

Key Roles and Responsibilities

· Conduct disassembling and assembling of Mechanical Equipment & Familiar with Boiler statutory inspections

· Hands on experience of valves, pumps, compressors, piping, safety valves, control & shutoff valves etc

· Assist the Maintenance Mechanical Engineers to troubleshoot/ fault diagnosis/ failure analysis to determine cause of failure.

· Assist the Maintenance Mechanical Engineers to develop Risk Assessment and mitigation measures for every Maintenance job in the plant

· Apply for Permit to Work (PTW) as the Competent Person (CP) for every Maintenance work in the plant

· Supervise contractors and liaise with other maintenance crafts and operations technicians to execute maintenance activities

· Withdraw and prepare spares from warehouse for job execution.

· Prepare daily updates on Maintenance activities for the day to all stakeholders (operations)

· Flexibility in supporting other Sembcorp plants whenever required.

Qualification, Skills and Experience

· Min Higher- Nitec or Diploma in Mechanical engineering field

· Preferably minimum 5 years of experience in the relevant maintenance fields in a power plant / petrochemical industry

· Be familiar with Computerized maintenance management system.

· Good team player and able to work well with other members and stakeholders.

· Strong interpersonal, communication and management skills.

· Outcome driven and able to deliver results within tight deadlines

· Good planning, organizing, and problem solving skills.

· Creative and critical thinking skills

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

· Institution-first Mindset – Put the interest of the Group ahead of individual interests.

· Collaboration – Deliver through collaborating across markets, businesses and functions.

· Accountability – Hold team and self accountable to deliver on our commitments.

We are hiring a Contract Process Technician to be outsourced to our clients from reputable healthcare organizations.
Apply now!

Job Responsibilities

• Perform production activities such as raw or intermediate material receiving, staging, material movement, dispensing, sampling, filter inspection, material charging, offloading, drum packing, milling operations, housekeeping as per SOP.
• Ensure proper communication and handling over of shift duties.

Requirements

• Minimum Diploma/NITEC in Chemical Engineering or related fields preferred.
• Immediate commitment preferred.

All Interested candidates are invited to email your resume in MS Word format to:

[email protected]

Please include your full working experience, education background, notice period, expected salary.

Sheryl Tan
Outsourcing Team
Recruit Express Pte Ltd
Company Reg. No. 199601303W | EA License Number: 99C4599

We regret to inform that only suitable candidates will be shortlisted for an interview.

Job Description

• Industry/ Organization Type: Telecommunication Services (Data Center)
• Position Title: Facilities Maintenance Technician
• Working Location: New Tech Park & Techlink
• Working Hours: Rotating 8-hour shifts
• Salary Package: Basic Salary + Shift Allowance ($300) + Variable Bonus + Medical & Flexi Benefits
• Duration: Permanent

Key Responsibilities

• Maintain and service building facilities, including electrical and mechanical systems.
• Perform minor repairs and improvements to buildings and equipment.
• Conduct routine preventive maintenance on building systems and infrastructure.
• Manage and oversee contractors and vendors to ensure cost-effective, quality repairs and maintenance.
• Provide engineering support during weekends, public holidays, or extended hours when necessary.
• To standby 24 hours on duty roster (will provide additional standby allowance).

APPLY NOW!!!

• Minimum ITE Certificate/Diploma in Mechanical/ Electrical Engineering, Facilities Management or related fields.
• With hands-on skill set in mechanical (ACMV) and electrical systems, with proficiency in maintenance, troubleshooting, and repair.
• Prior work in critical environments like Data Centres, Cleanrooms, or Semiconductor plants is an added advantage.
• Effective communication skills and ability to work as part of a team.
• Competent in using Microsoft Excel and Word.
• Good understanding of facility M&E (Mechanical & Electrical) systems.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #64875 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

• MNC Company
• Basic $2200 - $2500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8am to 4.30pm
• Working Location: Jurong Island (Transport Provided)

Job Responsibilities:

• Responsible for Heat Treatment Daily Operations, support shift team on Grade Change Maintenance activities and Day shift Operations
• In charge of day-to-day operation for Heat treatment unit to ensure quality, safety and production capacity are met according to production plan
• Lead and support GCM transition activities for HT facility, and main operation in ensuring cleaning activities are done efficiently up to company operation standard before handing over to maintenance
• Ensure any operational issues are communicated and followed by the maintenance team by working closely with maintenance contractor and coordinator
• Support the shift team in multiple aspects of operation consisting of off-spec PVA blending, chemical loading/unloading, chemical preparation and GCM cleaning
• On all activities, report to shift supervisor and day supervisor to ensure daily operation are done safely and according to the requirement
• Any other duties as assigned

Requirements:

• NITEC or Diploma in Chemical Process Technology
• At least 3 years’ working experience as Process Technician in a chemical industry

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

CHAN KAM HUI (R24125233)

EA Recruitment Pte Ltd

EA License No: 21C0492

Position title : Hotel Maintenance

Location: Bugis

Working days : 6 days ; 8 hours/day

Salary : $2500- $3000 (depend on experience)

Responsibilities & Duties :

• Perform general maintenance and repairs on plumbing, electrical.
• Ensure guest rooms are well-maintained, including fixing plumbing, electrical, and furniture issues.
• Conduct regular inspections of hotel facilities to identify potential maintenance problems.
• Respond to emergency repair needs (e.g., burst pipes, electrical outages, power trip, water heater malfunction,promptly.
• Maintain the hotel’s exterior, including landscaping, parking lots, and outdoor lighting.
• Ensure all safety and security systems, including fire alarms, extinguishers, and emergency lights, are functioning.
• Work closely with housekeeping and management to address and resolve maintenance issues.
• Ensure compliance with safety, health, and environmental regulations.
• Maintain an inventory of maintenance supplies and tools.

Requirements:

• Proven experience in hotel or building maintenance .
• Ability to troubleshoot and solve problems quickly.
• Basic knowledge of safety and fire regulations.

✅The Supreme HR Advisory Pte Ltd EA No: 14C7279

✅SAMUEL SIAW Reg No: R24124745

Summary:

• Preventive Maintenance, semiconductor, cleanroom, jumpsuit
• Basic salary up to $2600
• OT fees
• Attendance allowances $200/month (No lateness and able to commit to all scheduled roster shift)
• Night shift allowances
• Guaranteed AWS
• Performance bonus
• Increment after probation (subject to performance)
• Completion bonus (1 year)
• Location: Kranji
• Work week: 4/3/4/3 (12 hours shift)

Key Responsibilities:

• Perform robot Preventive Maintenance: parts cleaning & greasing, replacement of sensors, motors, motor drivers etc
• Installation of vacuum valves, fore line pipes, heater jackets
• Support tool owner engineer to do technical activities in fab: trouble shoot, modification, installation, de-installation
• Support 6S & logistic activities (parts cleaning, arrangement, labelling, housekeeping)
• Other related ad hoc duties

Key Requirements:

• Min Nitec in engineering
• No experience welcome to apply!

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Chemical Technician (Manufacturing/ Pharma/ GMP)

12 Months Contract

Location: Tuas

Up to $2,000 + Shift Allowance

Industry: Pharmaceutical

Our client aims at creating a new manufacturing concept consisting of a new generation of evolutive multi-product facilities, modular, adaptable, and agile, leveraging new disruptive technologies, to better address vaccine business challenges.

Job Purpose

• Operate and monitor the chemical production activities in the plant, ensuring that the product is manufactured within set production schedule and to the required standards of quality in a safe, efficient, responsible and cost-effective manner.

Responsibilities:

• Operate the different streams of the plant for their specific processes.
• Each of these processes comprises the following activities.

1. Handover checks computerised and/or manual.
2. Obtaining, following and completing process related documentation.
3. Pre and post batch cleaning of vessels and lines.
4. Pre batch checks.
5. Charging vessels either manually or via a pump.
6. Post charging checks and taking corrective action where necessary.
7. Adjusting and monitoring process conditions as required to start the process.
8. Monitoring process; both with computer and manually observing temperature, pressure, flow, pH, volume, colour, moisture content and adjusting the parameters accordingly.
9. Carrying out routine sampling and Bulk packing and testing of samples as required.
10. Recognise end point of the reaction and altering process parameter to stop reaction.
11. Transferring product to the next stage.

• Comply with HSE and quality policies and defined procedures. Bring out unsafe conditions and acts / procedures for correction.
• Record all operational and analytical data on the appropriate documents and inform the Shift Supervisor of any process abnormalities.
• Maintain product separation and accurate labelling of all documents, bags and vessels at all times.
• Carry out routine checks and scheduled cleaning procedures including cleanrooms.
• Request and collect raw materials and consumables, observe clean areas procedures, monitor raw materials stock and notify Shift Supervisor for any abnormalities.
• Notify Shift Supervisor of requirements for maintenance. Prepare equipment before maintenance work e.g. depressurizing, cleaning of lines and equipment, de-energizing, LOTO etc.
• Perform basic maintenance of equipment using tools such as TPM.
• At the Shift Supervisor's request, to carry out on-the-job training of other Chemical Technicians, incorporating cGMP and safety procedures.
• To observe cGMP and Health & Safety rules and regulations at work at all times in accordance with Company set standards.
• To be aware of the potentially hazardous nature of the chemicals in the area and must take the appropriate precautions when using them.
• Maintain housekeeping of the plant, daily API cleanrooms cleanings and provide suggestions for improvements.
• To operate ancillary facilities e.g. water system, tank farms, solvent recovery, salt crushing activities etc.

Requirements:

• Minimum NITEC or Higher NITEC in Chemical Processing or related
• Be prepared to work 12-hour shifts and overtime.
• Able to perform manual handling tasks including lifting of materials which are weights up to 25kg.
• Medically fit, and to be part of Company’s firefighter CERT team.
• Able to use process control systems for operation of plant equipment
• Familiar with operation of manufacturing equipment such reactors, centrifuges, filters, dryers etc
• Familiar and able to apply GMP in manufacturing processes
• Able to identify and manage hazards that may occur within biopharmaceutical plant

Lim Pey Chyi - [email protected]

Recruitment Consultant (R2090579)

Manpower Staffing Services (S) Pte Ltd

EA Licence: 02C3423

Benefits:

• Basic Salary up to $2,700 with yearly increment based on performance.
• Allowance and Attractive bonuses provided.
• 5 days work week include weekends & Public Holiday
• Our company emphasises on good career progression.
• Shift Work timings: (6.30am to 3.30pm), (8am to 5pm), (1.30pm to 10.30pm) – Depending on roster basis

Job Description:

This is a full time role for a Technician (Building Maintenance) located in River Valley Road. Our clients are pioneer companies that played an integral role in the country’s physical and economic transformation.

You will be responsible for performing preventive maintenance, repairs, and troubleshooting for mechanical and electrical systems. You'll conduct routine inspections of fixtures, fittings, cooling towers, and chillers, and supervise contractors during repairs and testing. Addressing fault reports, complaints, breakdowns, and customer service requests promptly is crucial. Additionally, you'll report any irregularities observed during maintenance, complete maintenance logs and schedules accurately and on time, and ensure compliance with building and fire safety regulations.

Qualifications:

• Minimum 2-3 years of relevant experience in building or facilities maintenance
• NITEC in Building Services, Electrical, Mechanical, Facility Technology or equivalent
• Good working knowledge in building, mechanical & electrical systems
• Able to work on rotating shift, public holidays and weekends

SERVICE TECHNICIAN (5 Day / West)

Job Type : Full-Time

• Travel Opportunity
• Training Provided
• 5 Days Work Week

Responsibilities :

• Have a passion to carry out trouble-shooting and maintenance works.
• Love the satisfaction after solving difficult machines.
• Willing to do hands-on work
• Willing to do brazing work
• Any other adhoc duties as assigned

Requirements :

• Candidate must possess at least Secondary School / "O" Level, Professional Certificate / NiTEC, Diploma / Advanced / Higher / Graduate Diploma in Engineering (Industrial), Engineering (Mechanical), Engineering (Mechatronic / Electromechanical) or equivalent.
• Required Language(s) : English
• Required Skill(s) : Aircon, Refrigeration, Chiller, Mechanical, Vacuum Pumps, Water Pumps, Scrubbers or Chillers.
• Able to travel on short notice
• Possess valid driving license (optional)
• Only Singaporean / SPR / Malaysian may apply.

Interested candidates who wish to apply for the advertised position, please send to us your resume via APPLY NOW

Email : [email protected]

We regret that only shortlisted candidates will be notified.

Benefit:

➡️ 5 days, 8am-5:30pm

➡️ Training Provided

➡️ Good career growth

➡️ AWS + Variable bonus

Job Scope:

• Operate and maintain machines used in production.
• Check products to make sure they meet quality standards.
• Fix simple machine or process issues to avoid delays.
• Follow safety rules and work instructions.
• Do basic maintenance and report broken equipment.
• Help with assembling, testing, and packing products.
• Keep records of production activities.
• Work with the team to meet production goals.

Requirement

✔️ Possess at least Nitec/Higher Nitec or relevant field

✔️ Relevant experiences will be advantage

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Angel Lee Yueh Lin (R24120071)

Position title : Hotel Maintenance

Location: Bugis

Working days : 6 days ; 8 hours/day

Salary : $2500- $3000 (depend on experience)

Responsibilities & Duties :

• Perform general maintenance and repairs on plumbing, electrical.
• Ensure guest rooms are well-maintained, including fixing plumbing, electrical, and furniture issues.
• Conduct regular inspections of hotel facilities to identify potential maintenance problems.
• Respond to emergency repair needs (e.g., burst pipes, electrical outages, power trip, water heater malfunction,promptly.
• Maintain the hotel’s exterior, including landscaping, parking lots, and outdoor lighting.
• Ensure all safety and security systems, including fire alarms, extinguishers, and emergency lights, are functioning.
• Work closely with housekeeping and management to address and resolve maintenance issues.
• Ensure compliance with safety, health, and environmental regulations.
• Maintain an inventory of maintenance supplies and tools.

Requirements:

• Proven experience in hotel or building maintenance .
• Ability to troubleshoot and solve problems quickly.
• Basic knowledge of safety and fire regulations.

✅The Supreme HR Advisory Pte Ltd EA No: 14C7279

✅SAMUEL SIAW Reg No: R24124745

Service Technician

Salary: $2500 - $3300 + $60 handphone allowance

Working Hours: Mon - Fri (8am – 5pm), Sat 8am – 12pm

Working Location: Senoko

Job Responsibilities:

• Servicing, installation, testing and troubleshooting of electrical and mechanical parts at clients' premises or workshop.
• Access control, able to work under minimal supervision.
• Experience in Security System is a plus.

Requirements:

• Candidate must possess at least a NITEC, Professional Certificate in ( Electrical / Electronic / Mechanical) or equivalent.
• Must have basic Electrical/ Mechanical and Electronic background.
• Must have class 3 driving licence
• Able to start work immediately or short notice.

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

About Facilities Management Team:
Our team centralises the organisation’s facilities management and renovation needs. We are looking for candidates who are happy to work at multiple locations, enjoy troubleshooting facilities issues and able to independently resolve facilities issues for our various centres. Candidates must be good stewards of Fei Yue resources and can provide solutions that best fit Fei Yue.

Responsibilities:

Facilities Management and Maintenance
• Independently troubleshoot facilities issues at various centres and provide best solution using cost-benefit-performance analysis.
• Basic repairs and maintenance works at Fei Yue premises, including height works.
• Optimizing the use of space within facilities to support operational needs and accommodate growth or changes in the organization.
• Supervise installation / replacement works on facilities and equipment which are carried out by vendors / contractors and ensures all works are carried out appropriately.

Health and Safety Compliance
• Part of Workplace Safety & Health Committee.
• Ensure all installation/ replacement works carried out by the contractors complied with the safety standards.

Others
• Develop and review work processes pertaining to FM.
• Ad hoc dispatch duties.
• Perform any other duties as assigned by the management.
• Maintain and upkeep an inventory list on spares for all centres.

Requirements:
• Holder of Higher Nitec in Facilities Management & Engineering or Integrated Mechanical & Electrical Design
• Preferred at least 2 years of facilities management and project management experience.
• Understand the importance of stewardship.
• Able to travel to various locations.
• Possess a Class 3 driver’s license.
• Able to work independently and as a team.
• Able to interpret single line electrical diagrams and layout plans for ACMV, fire protection and plumbing & sanitary.

Work Location: Henderson Road/ Islandwide

Interested applicants are to submit their resume to [email protected]. Please visit www.fycs.org for more details.

Job Description

• Industry/ Organization Type: Custom Die-cut Components Manufacturer
• Position Title: Process & Manufacturing Technician/Engineer (2D CAD Designer/Drafter)
• Working Location: Serangoon North
• Working Hours: Monday – Friday, 8am – 5.30pm
• Salary Package: Up to $3,800 + VB
• Duration: Permanent

Key Responsibilities

• Define manufacturing processes and estimates for new project introductions (RFQs).
• Design and define die cutting tooling.
• Prepare Process & Manufacturing documentation such as CAD Drawings, BOM, ECN, Control Plans, and Working Instructions.
• Evaluate manufacturing processes based on quality criteria, including efficiency, speed, and cost.
• Provide support for production troubleshooting and manage production delays.
• Promote continuous improvement in operational KPIs (Scrap, Efficiency, Cost, Yield, Customer Complaints, Audits, etc.).
• Optimize facility layouts, production lines, machine operations, and network performance.
• Implement cost-reduction strategies while maximizing quality.
• Train staff in both new and existing manufacturing processes.
• Collaborate with engineers, contractors, suppliers, and team members to improve processes.
• Ensure compliance with safety and environmental regulations in all manufacturing procedures.
• Study and upgrade systems and processes with new technologies.

APPLY NOW!!!

• Minimum of a Diploma/Degree in Engineering, preferably with at least 2 years of experience in a manufacturing or production environment.
• Prior experience in continuous process improvement culture/approach
• Proficient in CAD 2D software.
• Experience with ISO 9001 and ISO 13485 audits, Six Sigma, and lean manufacturing principles is highly desirable.
• Hands-on experience with laser machines will be an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70614 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Chemical Technician

Working Days & Hours: 3-4 Day | 8am to 8pm (12 hour rotating shift)

Working Location: Jurong Island (Transport provided at Jurong East)

Salary Range: $2000-$2600

• The Chemical Technician is responsible for monitoring and maintaining the operations of the process units and equipment by measuring, recording and controlling process operating parameters.
• Expected to diagnose and rectify systems and components’ faults in accordance to established procedures and specifications and to ensure that the process units and equipment operates safely and efficiently.

Job Responsibilities:

• Perform minor maintenance.
• Performing checks, start-up and shutdown operations on process equipment such as pumps and compressors.
• Carry out filter changes.
• Isolating piping systems for plant start-up, shutdowns, product grade change and troubleshooting operations.
• Adjusting process parameters to optimize process operations under supervision of Supervisors.
• Commissioning and decommissioning of process equipment.
• Performing emergency shutdown of process equipment
• Proper handing and blending of non-conforming and off specs products.
• Preparing plant equipment for maintenance
• Preparing chemicals, including mixing and dilution, for process operations
• Performing inter-tank transfers of chemicals and products based on established quality procedures.
• Performing emergency response activities and drills

Job Requirement:

• NITEC or Diploma in Chemical Process Technology
• At least 3 years’ working experience as Process Technician in a chemical industry

Tan Jia Jun | REG No: R23112681
The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Benefits:

• Basic Salary up to $2,300 with yearly increment based on performance.
• 5 Days Work Week (Mon-Fri,8:30am - 5:30pm)
• Reimbursement of Transport claims from office to client site
• Company Medical Insurance and Approval Clinics Panel for staff Medical Consultation.
• Our company emphasises on good career progression and providing our employees attractive remuneration with generous bonuses.

Job Description:

This is a full time role for a Technical Specialist located in Ang Mo Kio. Our client makes sophisticated nurse call systems, enterprise reporting and analytics tools, and industry-leading software applications for caregivers and clinical staff and you will be responsible for performing preventive and corrective maintenance according to Standard Operating Procedures and Work Instructions. It also requires coordinating site work with sub-contractors and customers, as well as providing on-site support for systems testing, commissioning, and client training, both locally and overseas. Additionally, the position entails responding to emergency service calls during and after office hours, including public holidays, as part of a weekly standby rotation.

Qualifications:

• Fresh / Entry-level / Relevant Experience for NTC2 / ITE / Diploma in Electronics or IT Engineering background. Certificate for Electronics / IT Engineering will be required upon interview.

Service Technician

• $2500 - $3300 + $60 handphone allowance
• Senoko
• Working hours: Mon - Fri 8am – 5pm, Sat 8am – 12pm

Job Responsibilities:

• Servicing, installation, testing and troubleshooting of electrical and mechanical parts at clients' premises or workshop.
• Access control, able to work under minimal supervision.
• Experience in Security System is a plus.

Requirements:

• Candidate must possess at least a NITEC, Professional Certificate in ( Electrical / Electronic / Mechanical) or equivalent.
• Must have basic Electrical/ Mechanical and Electronic background.
• Must have class 3 driving licence
• Able to start work immediately or short notice.

Leo Shin Guan Reg No: R22108030

The Supreme HR Advisory Pte Ltd EA No: 14C7279

• Maintenance Technician / Facilities Management
• Electrical & Plastic Manufacturer at Singapore (MNC)
• 5 Day (Mon – Fri): 8am-5.30pm + OT
• Salary: $1,800 - $2,200 +AWS +Allowance + VB
• Location: Senoko South Road (Sembawang Area）
• Transport provided at Admiralty or Woodlands MRT.

Requirements:

1. Minimum Nitec or equivalent, training provided for entry level.
2. Relevant experience in electrical installation, PLC (Programmable Logic Controller) and electrical maintenance preferred.
3. Good technical knowledge with hands-on experience in troubleshooting & servicing HVAC equipment eg chillers, cooling towers, aircon, air compressors etc
4. Experience in simple welding, piping work, and simple machining work.
5. Must be willing to wear jumpsuit and mask as Personal Protective Equipment while working in the production area.

Responsibilities

1. Assist in the maintenance of mechanical or electrical installations and equipment within the compound.
2. Provide engineering support to all depts if required
3. Diagnose and repair faulty equipment, perform preventive maintenance to minimize equipment breakdown.
4. Carry out instrumentation calibration activities.
5. In charge of maintenance and troubleshooting of entire facility duties.
6. Involve in TPM (Total Productive Maintenance) activities.

#SCR-carson-cheong

⭕ Cheong Kar Chun ⭕ Team Manager ⭕ R1980386

⭕ The Supreme HR Advisory ⭕ 14C7279

Purpose and Scope

As an Operations Technician for the process plants in the Energy-from-Waste cluster, the individual will be part of a team who is hands-on in operating the industrial processes and technology to harness energy from waste, including recycled wood from construction and demolition waste, as well as waste from industrial, commercial and municipal sectors.

This role is based in Singapore. There is no relocation package.

Key Roles & Responsibilities

• Operation of boilers, ensuring smooth operation and taking of daily process log reading
• Prepare equipment’s (isolate and drain/de-pressure Pump, exchanger, fan of others process equipment) for maintenance jobs
• Collect waste and water sample for lab analysis
• Able to read P&ID drawing and know the application of KKS
• Perform LOTO for equipment in accordance to isolation list prepared.
• Perform basic mechanical maintenance work (eg, replacing gasket, topping up lude oil, strainer cleaning, greasing and other simple task)

Qualification, Skills and Experience

• Minimum Higher NITEC with engineering / technical background
• Forklift license and boiler attendance certificate will be an advantage
• Possess good attitude and willingness to learn

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

Job Description

• Industry/ Organization Type: German MNC Precision Engineering Company
• Position Title: Service Technician x 2 pax
• Working Location: West – Tuas (Nearest MRT: Gul Circle) / Company transport provided at CCK/ Lakeside MRT
• Working Hours: 5 days (Monday to Friday: 8.30 am to 5.30 pm)
• Salary Package: Up to SGD SGD2500 + Allowances + AWS+ Variable Bonus (Good company benefits)
• Duration: Permanent

Key Responsibilities

• Adhere to prevailing Company SOPs including service KPIs
• Carry out indoor and outdoor service jobs (repair, troubleshooting, inspection, modification, warranty checks)
• Disassemble canceled units for stock return

APPLY NOW!!!

• Min. O level or ITE in Engineering
• Min. 1 year of working experience in repair work required
• Willing to be on standby for ad-hoc service activation after office hours with OT pay
• Must be willing to travel to client sites, with transport reimbursement provided

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67598 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694