Reporting to Shift Supervisor, this position will execute and maintain manufacturing process operations by physically performing the task of process control, equipment monitoring and in-process analysis to ensure the production process strictly follows company safety standards and environmental regulations and product quality is within customer's requirement.

Responsibilities:

• Support Shift Supervisor in handling plant start-up, shutdown manufacturing process according to established procedures
• Support production activities such as in-process quality testing, catalyst preparation, equipment preparation for maintenance, loading & unloading of process solvents
• Perform all routine task required to maintain manufacturing process such as monitor process parameters, plant patrolling, data logging and housekeeping
• Perform safe work practices through following safety regulations and supporting safety programs
• Ensure safe working conditions through taking corrective actions to maintain equipment and process condition within safe operating limits
• Perform company emergency response in areas of firefighting, rescue and loss containment
• Maintain plant safety equipment through routine checks
• Execute predictive maintenance to identify and prepare equipment for maintenance before breakdown
• Prepare or update standard operating procedures based on acquired experience and new technical know-how

Requirements:

• Diploma in Chemical Engineering or Chemical and Pharmaceutical Technology, NITEC in Chemical Process Technology or Higher NITEC in Chemical Technology or a related discipline with at least 4 years of relevant experience
• Entry level candidates without experience are welcome to apply
• Knowledge in Distributed Control System will be advantageous
• Effective team player with good communication skills and high self-motivation
• Able to perform rotating shift work
• Able to perform overtime work when required
• Willing to work in Jurong Island

Founded in 1996, Huabao Flavours & Fragrances Co., Ltd. is the largest Flavour & Fragrance house in China, engaged in the research & development, production, sales and services of tobacco flavors, food flavours, fragrances and food ingredients.

Our company in Singapore - Huabao Asia Pacific Pte Ltd, is currently looking for a motivated and detail-oriented Lab Technician to join our team.

Key Responsibilities:

1. Assist flavorist in organizing and cataloging flavor raw materials.
2. Prepare simple flavor formulations by blending flavor base ingredients.
3. Collaborate with flavorist to perform sensory evaluations of flavor samples.
4. Operate and maintain routine laboratory equipment to ensure it is in good working condition.
5. Maintain cleanliness and orderliness in the laboratory environment, ensuring compliance with safety and hygiene standards.
6. Assist with laboratory documentation, including recording experiment results, observations, and inventory management.
7. Support the team in carrying out any other tasks required in the flavor development process.
8. Communicate smoothly with the China headquarters to ensure accurate and efficient information exchange.

Qualifications and Skills:

• 2 years experiences in the flavor or food industry, familiarity with GC-MS instrumentation and software is preferred.
• Knowledge of basic laboratory equipment and flavor raw materials.
• Strong attention to detail and ability to work with precision.
• Good communication skills and ability to work effectively within a team.
• Fluent in Chinese, need to communicate effectively with the China headquarters.
• Ability to multitask and manage time efficiently.
• Familiarity with laboratory safety and hygiene standards.

If you have a passion for flavor creation and are eager to work alongside experienced flavorist, we encourage you to apply for this exciting opportunity.

Job scope:

• Perform daily production activities including process monitoring and field checks
• Operate all production chemical processing equipment (ie pumps, boilers, DCS, etc)
• Maintain and record accurately in production documents (eg Work Order)
• Assist Production Supervisor to perform field work in order to meet production schedule
• Attend and contribute for production training matters
• Participate and respond to the certified emergency response team

Beneficial:

• Forklift, work-at-height, confined space, firefighting and hazmat

Requirements:

• Willing to work in shifts (8am to 4.30pm OR 1.30pm to 10pm)

Benefits:

• 5 days work week
• Shift allowances

Roles & Responsibilities

Technician Responsibilities:

• Inspecting, analyzing, and troubleshooting systems and equipment.
• Carry out troubleshooting and minor repairs to building works and M&E works including air-conditioning, electrical, plumbing and fire protection system.
• Involved in coordination and supervisor of construction works
• Responsible for planning, managing and ensuring smooth implementation and monitoring of projects assigned
• Responsible for effective site management which include safety inspection and quality control of materials and plants on site
• Required to plan, lead and monitor progress and performance against the project plan whilst managing the day-to-day operational aspects of projects which includes manpower planning, construction progress monitoring, preparation of master schedule and cost control.

Technician Requirements:

• Any Degree
• Experience as a technician.
• Ability to multitask and liaise with professionals in different fields.
• Ability to explain problems simply and clearly.
• Proficiency in MS Office.
• Ability to understand verbal and written instructions.
• Ability to follow health and safety regulations.
• Excellent mathematical and problem-solving skills.

Position Overview

The candidate will assist the Maintenance Supervisor to conduct preventive maintenance, troubleshooting & repair of CNC machines and update maintenance records regularly.

Job Responsiblities

• Preventive maintenance and calibration of the machines according to the checklist
• Analyse machine problems and repair
• Update and maintain maintenance records and forms regularly
• Any other ad-hoc maintenance activities such as maintaining coolant and lubrication of machines
• Perform other duties and responsibilities, as assigned.

Position Requirements

• Minimum 3 years of hands-on experience in maintenance and repair of CNC metal cutting machines
• Good knowledge in Electrical and Mechanical aspects of CNC Machines
• Able to read the PLC

Roles & Responsibilities

The aircon technician will be involved in the maintenance, repair, and installation of different types of air conditioning systems. Aircon Technician will be involved in performing general maintenance services in households and offices all across Singapore, including washing aircon, diagnosing and rectifying issues in all brands and types of aircon, and installing and dismantling aircon. This role has the following responsibilities:
- Dismantle malfunctioning systems and replace worn out or defective parts.
- Perform chemical washes and chemical overhauls.
- Perform repair and maintenance on malfunctioning air conditioners.
- Perform general maintenance services on normally-functioning air conditioners.
- Prepare service reports after every completed job.
- Keep a record of job schedules.
- Pick up and deliver required materials and supplies as and when required.
- Communicate with clients with regards to problems in equipment and post-job reports.
- Perform any ad-hoc tasks given by supervisor or management.
This role requires the following skills
- Possess a CLASS 3 DRIVING LICENSE.
- Must be a confident driver and have experience driving medium-large-sized vans.
- Minimum 5 years experience working as an air conditioner technician performing chemical wash, general servicing, repairs, and installation.
- Experience working in CENTRALISED AIRCON SYSTEM maintenance is a big advantage.
- Confident at carrying out repairs and cleaning on all common aircon brands for wall-mounted, ceiling, casement, ducted, and portable aircon in Singapore including Daikin, Panasonic, Samsung, Mitsubishi Electric, Heavy Industries, Fujitsu, Toshiba, Carrier, and Europace.
- Able to speak and write basic English (excellent English is a strong advantage)
- Knowledge of electrical wiring.
- Able to do some heavy lifting and climbing.

- Willing to work on weekend shift

Position Summary

To provide efficient after-sales technical services and support, including assembly, pre-delivery inspection, delivery, installation and commissioning, trouble-shooting, maintenance and servicing of equipment and its related parts.

Job Responsibilities

Technical Support, Quality and Service Standards

• Responsible for the successful completion of scheduled service jobs & ad hoc troubleshooting.
• Perform and complete all service jobs as assigned, ensuring equipment is in good condition before handing over to customer.
• Work in co-operation with supervisor, colleagues and vendors to fulfill job requirements and resolve technical problems in meeting the expectations of external customers.

Records and Documentation

• Responsible for recording and providing accurate and complete service reports upon completion of every service jobs or visits to facilitate follow up and/or warranty claim where appropriate.
• Prepare and upkeep all equipment related documents in accordance with the documentation system and procedure of Industrial Services.

EHS and Housekeeping

• To maintain proper housekeeping and discipline at workplace as well as the client's work site so as to improve operational efficiency, whilst maintaining the good image of the Company.
• To observe safety precautions and to execute correct engineering practices at all times so as to minimize risk to self and others as well as damage to equipment and workplace.
• Act responsibly at all times to comply with the Environment, Health and Safety (EHS) policies, procedures and work instructions of the company.
• Able to produce Risk Assessment (RA) for related jobs at site.

Job Requirements

• Certificate or Diploma or in an Engineering disciplines.
• Minimum 3 years in machine maintenance and troubleshooting.
• Proficient in MS Office applications preferred
• Able to interpret Electrical diagram and knowledge on instrumentation & Control
• Fluent in both written and oral English
• Have good discipline and work attitude
• A good team player

Working Location

• Changi Loyang

Our client is transforming the cleaning industry with advanced robotic solutions that tackle manpower challenges. Their innovative robots are already making a difference in 30 countries. As they continue to grow, they are seeking a Service Technician to join their team. The position may require you to travel to different countries within the Asia region.

Key Responsibilities:

• Provide technical assistance during product demonstrations and sales trials to help customers understand our cleaning robots.
• Train customers on how to use and maintain our cleaning robots, and certify them for proper operation.
• Address technical inquiries, quickly identify issues, and troubleshoot robot malfunctions to ensure minimal downtime and maintain customer satisfaction.
• Work with internal teams to address and solve robot issues, both on-site and for factory returns.
• Stay updated on the latest robot technologies and use this knowledge to assist customers.
• Collect feedback to help improve the product and share insights with the R&D team.
• Travel to customer sites as needed for onsite support, training, and troubleshooting services.
• Assist with any additional duties assigned by the manager.

Requirements:

• Diploma or certificate in electrical, electronics, or mechanical engineering.
• 2-3 years in technical support or servicing, ideally in robotics or automation.
• Strong troubleshooting and problem-solving capabilities.
• Excellent communication and interpersonal skills for effective customer training and support.
• Ability to collaborate effectively with cross-functional teams.
• Up-to-date knowledge of the latest advancements in cleaning robot technologies.
• Must be willing to travel for customer support and training.
• Class 3 driving license is a plus.
• Interested candidates are invited to send in your Resume in MS Word Format stating your past work experience, reasons for each leave, past and expected remuneration.

We regret to inform that only shortlisted candidates will be notified.

By submitting an application to us, you will be deemed to have agreed for us to collect, use, and disclose your personal data which you have submitted to your prospective employers, for the purpose of job search, and/or other services which you have consented us to perform on your behalf.

Attn: Woo Gu Ming (R24123795)

Cultivar Asia Pte Ltd (MOM EA License: 19C8782)

* This is a 1 year contract role (subject to extension/conversion) *

Key responsibilities:

• Perform hands-on mechanical/electrical assembly tasks within the standard time
• Ensure that the assembled machine is according to Makino's quality standards
• Responsible for keying the operation time into EES for performance measurement
• Responsible for housekeeping and ensuring that the assigned machine area is clean and tidy
• Carry out duties in according with Quality Policy, EHS control procedures and WIS
• Ensure that all machine tools and instruments are properly calibrated and taken care of

Job requirements:

• Minimum NITEC/Higher NITEC in Mechanical/Electrical Engineering, or a related field
• Experience working in Assembly/Production is an added advantage
• Able to work shifts and commit to overtime on weekdays and weekends when required
• Able to handle physical work and stand for long hours
• Able to read and interpret drawings
• Have the initiative to learn and produce quality outcome
• Responsible and committed to the assigned task
• Team player and able to work independently

Job Description:

The Telecom Technician is responsible for mechanical completion, pre-commissioning, and commissioning activities.

To successfully complete these activities according to the project plan and schedule, the Telecom Technician should:

• Understand roles, responsibilities, and compliance requirements.
• Follow the project completion execution plan and the Notification of Energization (NOE) Flow Chart.
• Interpret system drawings and follow the Walk Down procedure.
• Submit a daily report for transparency with the Discipline Lead Technician.
• Attend daily toolbox talks for task briefings.
• Perform mechanical completion (‘A’ Scope ITRs) in collaboration with the construction team, adhering to project drawings and specifications.
• Execute pre-commissioning activities (‘B’ Scope ITRs) as per vendor documentation and specifications.
• Support Operation Test Procedures (OTP) under supervision.
• Use specific tools and test equipment safely and with quality assurance.
• Assist field service vendors in system commissioning.

Requirements

• Technical diploma in Electronics, Communication, Automation, Instrumentation & Control, or Electrical disciplines, or equivalent.
• Minimum 4 years of construction or commissioning experience in FPSO offshore projects and systems.
• Knowledgeable in Telecom Systems (PAGA, LAN, TV, Telephones, Radio, Radar, GPS, etc.) and installation/testing of communication cables (Ethernet, Fibre Optic, Antenna feeders).
• Proficient in installation, pre-commissioning, and commissioning of Telecom devices.
• Experienced in installation of indoor and outdoor telecom equipment, loop checking, and testing of telecom systems.
• Able to interpret engineering documents including datasheets, schematics, block diagrams, and loop drawings.

Registration No. :R1871121

EA License No.: 16S8067

Reza Johannes

• Setting up electrical connections in R&D equipment
• Setting up of Jigs
• Other R&D tasks as required (PCB testing, assembly, soldering, paneling, cabling and misc work)
• Performing Goods Receipt
• Labelling and Packaging of components
• Inventory storage and housekeeping
• Training will be provided

Requirements:-

• Possess engineering experience in Mechanical/Electronics, or equivalent
• At least 5 years experience in relevant or related field
• Good communication and interpersonal skill
• Proactive with good initiatives, problem solving skill and analytical ability
• Technical knowledge and hands-on skills on monitoring, troubleshooting, servicing, maintenance and tool recovery
• Able to work under pressure
• Experienced In Assembly, Automation, Testing / Soldering / Machine Alignment (eg. Perpendicularity) preferred
• Able to work any shift
• Able to work OT on weekends and public holiday
• · Must be able to work night shift and split shift
• · Must be able to work extra hours or weekend if needed

- Assist Project Manager and Engineer to fabricate in the stage of setup the monitoring system;

- Installation and setup of instrumentation hardware;

- Liaise positively among the project team;

- Testing and carrying out the maintenance of the system;

- Site inspection is required for troubleshooting

- Ensure that works carried out are in compliance with the Workplace Safety and Health Act

- Perform any other technical tasks as and when required

Job Description

• Maintain all electrical in good condition
• Preventive maintenance all load center
• Checked all support main power annual
• Take care lighting general area
• Repairing work order and carry out
• Daily report to Chief Engineer
• Attend meeting as assigned by Chief Engineer
• All happening in department informed to Chief Engineer

Location: Singapore

Job Type: Full-Time

Working Hours: 5 day work week (Tuesday – Saturday)

Description:

We are seeking a motivated and reliable individual to handle window mesh installation projects.

Responsibilities:

• Perform installation tasks for household fixtures.

• Use basic handyman tools and equipment to carry out installations.

• Travel to different sites to carry out installation works.

• Attend to any defects that customers may have.

Requirements:

• Relevant practical experience will be advantageous.

• Ability to carry out installation with the use of basic handyman tools.

• Possess Class 3 driving license. Vehicle for transport will be provided.

• Training will be provided.

Job Responsibilities:

1. Installation and Configuration:

· Install, set up, and configure IoT devices and sensors in various cleaning equipment and facilities.

· Ensure proper connectivity and data transmission between IoT devices and central monitoring systems.

2. Monitoring and Maintenance:

· Continuously monitor the performance of IoT devices, identifying and troubleshooting technical issues.

· Conduct routine maintenance and firmware updates to ensure optimal functionality.

· Achieve high IoT uptime percentage, minimising downtime for maintenance and repairs

· Minimise response time to ensure prompt resolution and quick return to normal operations.

3. Data Analysis:

· Collect and analyze data generated by IoT devices to identify patterns, trends, and anomalies.

· Provide insights and recommendations based on data analysis to improve cleaning processes and efficiency.

4. Integration:

· Collaborate with software developers and engineers to integrate IoT data into cleaning management software

· Working on Ad hoc projects and other IoT related matters

Job Requirements:

• Minimum 1-2 years of experience in IoT, electronics, network admin or related field.
• Excellent communication skills.
• Proficiency in IT systems and networking.
• A customer service orientation and problem-solving mindset.
• Location: West (Bukit Batok)
• Working Hours: 5 Days Work Week (Mon – Fri)

Work Week & Shift: 5.5 days

Location: Gul Circle

Job Responsibilities:

• Perform facilities maintenance of crane and machineries
• Perform routine preventive maintenance and corrective action to ensure equipment run smoothly and efficiently
• Respond promptly to calls and feedback
• Liaise with contractors and in-house team to handle breakdown
• Provide technical support, standby and respond for emergency
• To ensure cleanliness/housekeeping / tidiness of warehouse, warehouse equipment is kept in good order/conditions
• Such other duties and responsibilities as may be reasonably requested by your immediate supervisor / the head of department from time to time.
• Travel overseas for work / assignment as and when necessary or requested by your immediate supervisor / the head of department.

Compensation:

• annual wage supplement (AWS)
• allowances*
• overtime

Job Description & Requirements

Roles & Responsibilities

Technician Responsibilities:

• Inspecting, analyzing, and troubleshooting systems and equipment.
• Carry out troubleshooting and minor repairs to building works and M&E works including air-conditioning, electrical, plumbing and fire protection system.
• Involved in coordination and supervisor of construction works
• Responsible for planning, managing and ensuring smooth implementation and monitoring of projects assigned
• Responsible for effective site management which include safety inspection and quality control of materials and plants on site
• Required to plan, lead and monitor progress and performance against the project plan whilst managing the day-to-day operational aspects of projects which includes manpower planning, construction progress monitoring, preparation of master schedule and cost control.

Technician Requirements:

• High school diploma.
• Experience as a technician.
• Ability to multitask and liaise with professionals in different fields.
• Ability to explain problems simply and clearly.
• Proficiency in MS Office.
• Ability to understand verbal and written instructions.
• Ability to follow health and safety regulations.
• Excellent mathematical and problem-solving skills.

• Operating of CNC machine.
• Assist the supervisor/manager in manufacturing operation.
• Perform housekeeping and comply with manufacturing disipline.
• Teamplayer and willing to learn new skills and positive attitude to improve.
• Able to be work independently and achieve allocated tasks according to deadline.
• Any other ad-hoc task assigns by supervision.

Monday - Friday, 8.30am – 5.30pm

Location: Jurong

Basic + AWS + VB

Responsibilities

• Handle service requests for both scheduled and unscheduled maintenance in compliance with the Company’s Service Agreement.
• Diagnose and resolve any system issues encountered during maintenance service visits at customer locations.
• Oversee and ensure the quality of work performed by subcontractors during maintenance tasks, while providing technical support to other departmental staff.

Requirements

• With 1-2 years’ experience in service and maintenance of alarm, card access and CCTV systems.
• Candidate with building construction safety supervisor / Work-At-Height / Risk Management certs will be an added advantage.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform that only shortlisted candidates would be notified

We wish you all the best in your career search.

You are welcome to visit our website at www.rdtpsg.com

RD Trusted Partners Pte Ltd| EA License No.: 24C2352

Chee Wei Qian (Sandy) | EA Personnel No.: R24125920

Roles & Responsibilities

• Deliver professional nail services including manicure/ pedicure, extension and gel nail services
• Good excellent cleanliness and hygiene practices
• Recommending various nail designs and nail art to clients
• Evaluating the condition of clients’ nails and advising them on proper nail care and suitable nail care treatments
• Sanitizing all nail instruments and equipment before each use
• Ensuring that workstations are kept clean and orderly
• Ensuring that nail supplies are adequately stocked
• Advise clients on nail care and use of products and colors
• Promote and sell nail care products
• Schedule client appointments and accept payments
• Other duties as and when assigned

Requirements

• With or Without experience - Candidates with experience will be an advantage
• Able to work on weekends and PH
• Good communication skills and cheerful personality

Other Information:

• Good and comfortable working environment
• Annual leave and Medical benefits
• Basic Salary + Commission + Service point + Incentive

Purpose of the Position

• Support for the Operational readiness of the new plant (including walkdowns & punch listing, pre-commissioning, and commissioning activities, preparing SOPs & routine schedules etc.)
• To manage Linde Gas Singapore operations to ensure it is maintained safe, reliable, and efficient.
• The operations are to achieve key performance indicators (KPI’s) and annual plan objectives.

Responsiblities

• Accountable for compliance with safety, health, environmental, quality and relevant industry standards.
• Accountable for safe, efficient, and reliable operation of assets
• Accountable for investigating and trouble shooting process issues and outages
• Support process improvement, productivity and reliability projects
• Accountable for the planning, supervision, and execution of operation activities
• Accountable for compliance to all Procedures, Routines, Logs and other Operational Processes
• Accountable for meeting contractual and supply commitments
• Accountable for planning and executing TAR operational activities
• Accountable for controllable site costs
• Accountable for timely and accurate data reporting

Requirements

• ITE in Chemical Process technology /Diploma in Chemical Engineering or related discipline
• Min. 1 to 2 years Operational experience with demonstrable exposure to process plant operations and site-based activity or equivalent.

JOB OVERVIEW

The Calibration Lab Technician is responsible for performing calibration, testing, and verification of equipment and instruments in the areas of dimensions, mass, force, and torque. The role ensures adherence to strict quality and regulatory standards to maintain precision and accuracy in measurements.

KEY RESPONSIBILITIES

• Perform calibration and verification of measuring instruments and devices related to dimensions, mass, force, and torque in laboratory or client site as required.
• Operate and maintain precision instruments, including micrometers, weights, force gauges, torque testers, and dimensional tools etc.
• Conduct routine testing and quality checks on lab equipment.
• Prepare detailed calibration certificates and reports in compliance with ISO/IEC 17025 standards.
• Maintain accurate calibration records and ensure traceability to national or international standards.
• Ensure proper maintenance and cleanliness of calibration equipment and the lab environment.
• Troubleshoot, repair and adjust instruments as necessary to meet calibration specifications.
• Follow safety protocols and maintain compliance with all relevant quality management systems.
• Stay updated on industry standards and methodologies related to calibration.
• Work collaboratively with engineers and other team members to meet customer requirements.

PREFERRED SKILLS

• Proficiency in handling precision measuring instruments.
• Knowledge of calibration software and tools is an advantage.
• Strong attention to detail and problem-solving abilities.
• Good communication and interpersonal skills.
• Ability to work independently and as part of a team.

1. JOB DESCRIPTION

Job Title

IT Support cum Cashier (General)

Job Description & Requirements

Work in Clique Gaming Cybercafe (Chain Store all Singapore) , easy and relax job .

Job dec :

1. Counter service

2. Customer service

3. Repair PC

4. Others easy job .

Require :

computer knowledge

Whatapps number 89000857

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Occupation: Inspection Technician

Salary : $1,600 to $2,300

Allowances : $11/day, $22/night

Working hours:

• 12 hour shifts
• Rotate day/night shift every month
• 4334 shift schedule - 4 days work, 3 days rest. 3 days work, 4 days rest

Work place: Tampines

Inspection Technician Singapore Headquarters | Contract | On-site company’ primary focus is on the development of optical and extreme ultraviolet (EUV) photomask blanks, which are critical components in the manufacturing process of the latest-generation chips used in various applications such as artificial intelligence, high-performance computing, and 5G. The company also manufactures a range of photomask blanks used in the production of chips for various applications such as memory, logic, and power devices.

Life at company strives to create innovations for a better future for people.

At company, we are dedicated to innovation in the information technology segment, envisioning a world where all can thrive in harmony with nature. Our people are guided by our mission along with principles of commitment and innovation, influence every decision and action we take. We prioritize environmental protection, safety, and human rights, fostering diversity, inclusion, and employee wellbeing.

Be Empowered to Innovate and Develop for a Better Tomorrow with Us

• Experience an empowering and inclusive workplace that fuels your growth and development.

• Unlock your potential with abundant opportunities for skill-building and career advancement.

• Thrive in an environment that supports work-life balance and values your well-being.

• Receive fair and competitive rewards – your success is our success.

• We believe in recognizing excellence and celebrating your contributions.

Get to Know the Role

The position involves offering engineering, production, and application support for inspection equipment, covering operation, troubleshooting, maintenance, installation, and upgrades. Responsibilities include providing first level and front-end support to ensure reliable tools operations and efficient trouble recovery. Routine checks are performed to monitor equipment operating parameters, with prompt updates onto monitoring systems to maintain operations within control specifications. Additionally, the role includes troubleshooting, quick equipment breakdown recovery, and conducting corrective/preventive maintenance, as well as participating in upgrading, modification, or improvement work as needed.

Essential Responsibilities

• Assist in engineering, production, and application support for inspection equipment regarding operation, troubleshooting, maintenance, installation or upgrading.

• Provide first level and front-end support to maintain reliable tools operations and trouble recovery.

• Conduct routine checks to monitor equipment parameters, prompt updating onto monitoring system to ensure operations are within control specifications.

• Troubleshoot and resolve equipment breakdowns, carry out corrective/preventive maintenance, upgrading, modification or improvement work.

• Any ad hoc duties assigned by supervisor/manager.

Skills and Competencies Profile

• Diploma/Degree in Engineering preferred, but not required.

• Relevant work experience preferred, but not required.

• Proficient and have experience Microsoft Word, Excel, and PowerPoint.

• Good conversational English skills to communicate and collaborate with colleagues.

Additional Information:

• This will be a 2 year contract position.

• Leave approvals for holiday seasons are subject to manpower requirements.

• OT days is subject to change depending on budget and operational needs.

Please contact 90608812