Job Description & Requirements

Perform inspection including the use of gages and equipments and document quality paperwork meeting the Engineering Print, Job Instruction Sheets and/or the QMS Instructions. To support all CORE, EH&S and Continuous Improvement activities.

Roles and Responsibilities

• Perform job inspection at first piece, in process and final inspection per the Job Instructions Sheet plans.
• Perform First Article Inspection (FAI) and Delta FAI per AS9102 requirements.
• Perform dimensional inspection using a variety of inspection gages & equipment.
• Initiate Quality Notification (QN) for non-conformance when products are not meeting Quality and Engineering requirement.
• Perform proper use and maintenance of gages and inspection equipment.
• Perform proper documentation including inspection stamping of quality paperwork.
• Maintain and improve 5S standards on workstations and responsible areas.
• Good communication and interpersonal skill and ability to communicate with all levels.
• Adhere to company EH&S policies and guidelines.
• Adhere to company Quality Policy.

Qualification and Education Requirements

• Minimum Education required (specific field or equivalent):
• NITEC qualification in Precision/Mechanical Engineering or higher.
• Minimum years of experience in role: At least 2 years of working experience in a quality control environment.

Preferred Skills (if any):

• Able to interpret basic technical (GD&T) drawings.
• Proficient in using hand gages; micrometer, dial indicator, height gage etc.
• Good command of written and spoken English.
• Basic operating knowledge of Co-Ordinate Measuring Machine (CMM) inspection; Carl Zeiss / Wenzel CMM.
• General proficiency of Microsoft Excel and Microsoft Word (SAP a plus).
• Non Destructive Testing (NDT) method in MPI Level 2 will be an added advantage.
• Able to perform weekly rotating shifts.

Working Location: Bedok South

ALG is currently hiring NDT Technicians for our internationally renowned airline client based in Singapore. This role will be on a long-term contract with option extension and a chance for permanent role conversion should you excel.

Job Responsibilities:

• Assist NDT and BSI Authorisation Holders to perform NDT and BSI inspections on aircraft structures and components/parts/engines/APUs.
• Carrying out and certifying inspections in the NDT method specified in their authorization where applicable
• Maintain good housekeeping, documentation, equipment, and tools to ensure compliance with airworthiness standards
• Maintain a high level of situational awareness and by fully compliant in all matters related to general safety and personal safety as guided by company and industrial practices
• Ensure validity of calibration of all inspection and test equipment before use
• Conduct regular checks on chemical expiry and maintain its records
• Carry out any other duties as assigned by Engineering Supervisor (NDT).

Job Requirements:

• Ideally has 1 - 2 years of Aerospace experience and possess NAS 410/ EN 4179 Level I certification on FPI. Other FPI Level 1 certificates can be considered if the candidate can demonstrate his proficiency.
• Able to perform rotating day and night shift.
• Able to effectively utilize lifting devices.
• Fresh entry level candidate preferably with educational qualification in Aviation can be considered.

If you are interested in this role, please APPLY NOW! Please note that only shortlisted candidates will be notified.

EA License Number: 11C4379 | Registration Number: R23113794

· Adhere to all Singapore safety standards, rules and regulations as well as group

legislative safety requirements while executing tasks.

· Perform routine and non-routine preventive maintenance activities in one or more

designated work areas.

· Assist in necessary troubleshooting on machines and equipment (motors, bucket

elevators, pneumatic gate valve, solenoid valves, air slides, mechanical/rotating

parts and so on) as and when required.

· Assist in shipment receiving activities and ensure timely completion

· Assist in monthly physical stock check/count as assigned by superior.

· Assist in cement sampling and testing activities during every shipment.

· Assist in maintaining the general housekeeping of the plant at desired level.

· Assist in installation of new assets, equipment and machineries

· Assist in updating and up keeping the maintenance checklist.

· Assist in all other plant/operations related works as assigned by Superior.Qualifications

· NTC / Nitec / Diploma in Mechanical / Electrical Engineering or similar technical certification from a reputable institute.

· Able to read basic schematic drawings or circuit diagram. (added advantage)

· Relevant working experience. Hands-on knowledge on welding, cutting and so on will be an added advantage. · Knowledge in Microsoft Office. (added advantage)

· Able to work in a shift when required

• To work in accordance wtih company policies, production plan, product specifications and management guidance
• Operate and monitor machinery which distillate, filter, separate, heat or refine chemicals, to blend,mix, process a wide range of chemical products
• Handover and takeover of plant status, routine check on plant, ensure all bleeders and vents are close
• Console technician to handover and takeover of plant status face to face at control room, check on MOS, screen through all pages for abnormality and check status of fire panel
• Report any leaks, deviation, and abnormality and unsafe conditions in the plant to Team Leader
• Perform process start-up, normal operation and shut-down in accordance to work instructions, ensure no deviation on process and safety
• Monitor processes, taking samples and performing routine chemical and physical tests of products and recording production data. Ensure products are meeting product specifications
• Line up for tank transfer and monitor transfer of products in conformance with safety procedures
• Logistic operation (Loading/unloading ISO tankers, road trucks, drumming, etc)
• Troubleshooting of equipment malfunctions, carrying out routine operating verification tests, filter cleaning, minor piping/spool connection/disconnect and request for maintenance if needed
• Prepare equipment for maintenance, LOTO, check for leaks and gas test, De LOTO, AFTT, test run and put equipment back in service
• Assess the area or equipment before signing the permit assessor portion
• Respond to process upsets, leaks and emergency situations (as ERT team member)
• To support maintenance activities/other departments/shifts on shortage of manpower
• Monitor, report and intervene any unsafe conditions and situations
• Raise concern on MOS, safety critical equipment and MOC/PSSR as required
• Other duties as assigned
• Good team worker, good communication skills, safety/process knowledge and troubleshooting skills are prerequisites
• Work 12-hour shifts and be physically fit
• NITEC in Chemical Process Technology with 1 to 5 years of working experience in Chemical/Pharmaceutical, Oil and Gas manufacturing industries
• Good understanding in general EHS practices
• Fluent in English (written and verbal)
• Candidates need to be trustworthy, hands-on, take full ownership/responsibility of their roles and responsibilities. Can-do attitude, flexible approach and provding full support to the Site Management team are key.

Job Description & Requirements:

• PC / Notebook / AIO system diagnostic.
• Assist and advising customer the best solution for their repair / upgrade / customization.
• Handling of hardware and software installation.
• Training will be provided.
• Basic Salary + High Commission + Variable Performance Bonus
• 5 days/6 days work week
• Medical Benefits
• Staff Purchase Discounts

Responsibilities and Duties

*Carry out preventive maintenance and corrective repair works on packaging and conveying equipment
• Troubleshoot and rectify electrical, mechanical, pneumatic and hydraulic system faults on equipment
• Identify mechanical, electrical, and technical issues through inspections and tests
• Analyze problems, diagnose malfunctions, and find solutions
• Use various tools and equipment for diagnosis and repair
• Maintain accurate records of repairs and parts used
• Communicate findings and repair option
• Test vehicles post-repair to ensure proper functionality
• Order and replace parts, collaborating with suppliers
• Attend to breakdown repair and recovery of operational equipment
• Reduce equipment downtime and enhance equipment performance through quality maintenance works
• Proper recording of works carried out on equipment. Equipment includes vehicles, chassis, forklift, industrial facilities, etc (list is non exhaustive)
• Any others adhoc job assigned by supervisor
• Maintain high standard of housekeeping at workplace
• Ensure strict adherence to all workplace Health & Safety policies, legal and company regulations, with proper documentation and storage.
• Practice safe work procedures and safety rules implemented at the workplace.
• Not to engage in any unsafe or negligent act that may endanger self or others.

Singaporean Only

Job descriptions

• Carrying out maintenance, repairing and servicing tasks (Electrical /Aircon / Mechanical / Building / Repairs).
• Carry out preventive / breakdown and corrective maintenance of M&E works or Aircon or Building.
• To carry out maintenance operations for facilities or buildings , including troubleshooting and repairing mechanical, electrical, and plumbing systems
• Attend to defects and customers' complains promptly. Respond to any fault reports, client requests, or any breakdowns efficiently.
• Performing regular maintenance and repairs on the building facilities or systems to ensure smooth operation. Reporting any fault issues to the supervisor.
• Conduct preventive checks and troubleshooting on the M&E systems.
• Record or inform supervisor of any faults or issues during routine checking.
• Perform any other ad hoc duties assigned

Requirements

• Minimum 2 years and above in Facilities Maintenance or Engineering company
• Minimum NTC/ ITE/ NITEC/ HIGHER NITEC/ VOCATIONAL CERTIFICATE in Mechanical / Air-Con / Electrical / Building / Facility Management or maintenance
• Shift works , 2 Day shifts , 2 Night Shifts , 2 Off days.
• East Side - report for day shift location in Changi . Northern Central - report for night shift near Whitley Road.
• SIngaporean only

OT Pay and Bonus!!

Responsibilities:

· Perform building M&E services maintenance, repair and servicing works to properties under our care.

· Perform reinstatement of properties under our care.

· Perform builder’s works to properties under our care.

· Carry out on-call emergency activities as necessary, notify appropriate personnel and follow safety protocol.

· Undertake any other ad hoc activities as assigned by management.

Other Responsibilities

· Support other M & E maintenance jobs or projects as and when assigned by management.

· Cover other technicians on shift duties as and when required by management.

Schedule

· M & E technician schedule

WORKING HOURS

MONDAY TO FRIDAY 9.00 – 5.30 PM

SATURDAY 9:00 – 4.30 PM

OVERTIME

According to Employment Act

i.e. Working beyond normal work hours from Monday to Saturday 1.5 x

Working on Sunday 2 x

Working on PH 1 x

Responsibilities:

• Conduct maintenance and repair tasks on CCTV systems installed in buses

• troubleshoot and diagnose issues with CCTV equipment

• Repair or replace faulty components as needed to ensure proper functionality

• Perform routine inspections and preventive maintenance on CCTV systems

• Record and maintain accurate documentation of repair activities

• Follow safety protocols and guidelines while working in various environments

• Maintain cleanliness and organization of work areas and equipment

• Meet the KPI set by the department

Additional Information:

• Diploma or Electric Certification

• Ability to enter data accurately in Excel or similar software

• Strong multitasking skills with the ability to prioritize tasks effectively

• Basic knowledge of electronics and CCTV systems

• Ability to work independently and as part of a team

• Willingness to work night shifts as required by job demands

5 work days per week

7pm - 4am

8pm - 5am

Our Production Technicians operate our chemical processes and perform production related activities, utilizing their chemical manufacturing knowledge and experience to operate and troubleshoot the plant in a safe and efficient manner. The Production Technician works in a team environment where collaboration and teamwork are critical to meeting the goals of the business.

Production Technicians are required to work shift work including nights, weekends, and holidays.

Job Responsibilities include but are not limited to:
- Safely and efficiently operates their assigned processes to meet the day-to-day quality, production and productivity goals of ALAM.
- Effectively prioritizes their daily tasks working with the Production Leads and Production Supervisors.
- Participate in monthly safety meetings and promote a safe work environment
- Actively participate on ALAM’s emergency response (ER) team and ER entry team
- Reviews and updates the Standard Operating Procedures
- Reviews and updates the Learning Resources for the processes
- Completes annual personal goals to achieve the plant goals and their own personal development goals
- Assembles and disassembles production equipment
- Performs basic maintenance on equipment
- Drives a culture of "Do It Safe, Do It Right the First Time" with their actions and their words on a daily basis
- Successfully complete all assigned training
- Cross-trains peers on approved functions
- Ability to roll cylinders- Rolling cylinders requires an individual to tilt a cylinder slightly with one hand, and use the other hand to move the cylinder forward by rolling it
- Fitness for duty, including but not limited to: ability to lift 50 pounds and have the ability to climb ladders
- Actively participate on ALAM’s emergency response (ER) team including as an ER entry team member, which requires wearing a tight fitting full-face respirator

Work Hours:

• Monday - Friday, Shifts

Responsibilities

• Assist engineer to carry out all the Test related activities
• Support & implement different product configuration setup
• To test, analyze and perform troubleshooting on product failures
• Working closely with process and test engineers on yield improvement
• Participate in the Kaizen activities
• To update test tracking records
• Prepare and update Working Instruction
• To support the NPI Process and production runs
• Participate in ISO activities (implementation & maintain)

Requirements

• Nitec & above qualification in engineering with at least 1-3 years of working experience in testing and debug environment
• Good team player
• Ability to work with Peers, engineers, and superiors
• Able to multi-task & work under pressure
• Good understanding of test methods and concepts
• Knowledge of programming and debugging skills

RBA Compliance.

This role involves ensuring the efficiency, safety and compliance of heating, ventilation, air conditioning (HVAC) systems, plumbing, fire protection systems, elevators and other mechanical infrastructure.

Plan, manage, inspect, compile service reports for routine maintenance for M&E systems

Prepare quotation via schedule of rates for any repairs or new works

Attend to fault calls for emergency/ critical M&E systems

Provide support in project works

Attend meetings as arranged by superior

Required to make frequent site visits to government sites (this is not a desk bound job)

Requirements:

Only those with relevant experiences may apply

We seek Mandarin-speaking candidates who are required to serve Mandarin-speaking clients.

To Apply:

Please attach your resume with the following information:

Reason for leaving last/ current employment

Last drawn salary

Expected salary

Notice period

Workplace location

Clementi area

About Us

The National Cancer Centre Singapore (NCCS) is a leading national and regional tertiary cancer centre, attending to the majority of cancer cases in Singapore’s public healthcare sector. We offer world class oncology care by having the best talent, doing robust clinical and translational research and leading education efforts to improve cancer outcomes. Join us to build a meaningful career and offer patients hope for a cancer-free tomorrow.

About the Role

You will be part of the Oncology Pharmacy department to provide all aspects of administrative and operational support to onsite pharmacy activities as well as inventory management.

Responsibilities

• You will assist in drug stock management, dispensing processes, drug distribution and laboratory work and other assigned administrative tasks.

Job Requirements

• Diploma in Pharmaceutical or Certified Pharmacy Technician

• Organised and hardworking

• Good interpersonal and communication skills

About the Company

Casa Creation is the authorized distributor for SK Magic, one of the world’s most advanced home appliance makers originating from Korea. Combining sleek design, effortless use, and amazing health benefits, we believe that our SK Magic product range - particularly state of the art water and air purifiers - are the fast-rising appliances of the future in today’s hectic yet discerning society. Find out about us - https://skmagic.sg/pages/about

Vision

Creating a clean and safe living environment, through the pursuit of fundamental health care.

Core Values

1. Health: We believe in creating a clean and safe environment, through the pursuit of fundamental
   health care.
2. Eco-Friendliness: Our products reduce resource consumption, minimise pollution and reduces the production-use-disposal process.
3. Convenience: We aim to minimise labour for all our customers, creating a seamless experience and curating our products to suit each of your needs.

Responsibilities

• Install company water purifiers on-site, including set up of parts, troubleshooting, and quality checks.
• Perform routine maintenance, such as inspecting parts, checking, and replacing filters.
• Perform repair works as necessary.

Skills Required

• Minimum 1 year experience in plumbing or related technician work.
• Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
• Customer oriented with positive work attitude.

Other Requirements

• Possess a valid Class 3/3A driving license.
• Able to work 5.5 days a week.

Be a catalyst for change and drive sustainability forward with us at The Westin Singapore, where your passion transforms into meaningful action.

As a Senior Technician, you will be tasked to:

Inspect, repair, and maintain HVAC, air quality control, and refrigeration equipment. Maintain and conduct daily inspections of the mechanical plant. Monitor and control property temperature. Monitor and analyze energy and utilities usage. Calibrate all controls, gInspect, repair, and maintain HVAC, air quality control, and refrigeration equipment. Maintain and conduct daily inspections of Guest Rooms. Coordinate Room Preventive Maintenance. Assist with guest room rectification works. Monitor and control property temperature. Monitor and analyze energy and utilities usage. Calibrate all controls, gauges, meters, and other equipment. Assemble, install, test, repair, and maintain electrical systems or electronic wiring. Assemble, install, and maintain pipe assemblies, fittings, valves, etc. Perform routine pool and spa maintenance.

Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards and anticipate and address guests’ service needs. Speak with others using clear and professional language. Develop and maintain positive working relationships with others and listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; and identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Reach overhead and below the knees. Move in confined or elevated spaces. Move over sloping, uneven, or slippery surfaces. Move up and down stairs, service ramps and/or a ladder. Grasp, turn, and manipulate objects of varying size and weight. Assist with moving, lifting, carrying, and placing of objects weighing in excess of 100 pounds. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.uges, meters, and other equipment. Assemble, install, test, repair, and maintain electrical systems or electronic wiring. Assemble, install, and maintain pipe assemblies, fittings, valves, etc. Perform routine pool and spa maintenance.

Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards and anticipate and address guests’ service needs. Speak with others using clear and professional language. Develop and maintain positive working relationships with others and listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; and identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Reach overhead and below the knees. Move in confined or elevated spaces. Move over sloping, uneven, or slippery surfaces. Move up and down stairs, service ramps and/or a ladder. Grasp, turn, and manipulate objects of varying size and weight. Assist with moving, lifting, carrying, and placing of objects weighing in excess of 100 pounds. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.

Marriott International is an equal opportunity employer. We believe in hiring a diverse workforce and sustaining an inclusive, people-first culture. We are committed to non-discrimination on any protected basis, such as disability and veteran status, or any other basis covered under applicable law.

At Westin, we are committed to empowering guests to regain control and enhance their well-being when they need it most while traveling, ensuring they can be the best version of themselves. To achieve the brand mission of becoming the preeminent wellness brand in hospitality, we need passionate and engaged associates to bring the brand’s unique programming to life. We want our associates to embrace their own well-being practices both on and off property. You are the ideal Westin candidate if you are passionate; you are active and take pride in how you maintain your well-being; you are optimistic; you are adventurous. Be where you can do your best work,​ begin your purpose, belong to an amazing global​team, and become the best version of you.

• Plan and supervise renovation, A&A works
• Experience in M&E works such as fire protection system, cooling tower, air con, etc.
• Plan and supervise building services such as cleaning, landscaping, waste management, renovation, etc.
• Conduct daily routine inspection for building/M&E facilities works.
• Ensure contractor comply with security and safety requirements for corrective and preventive maintenance works.
• Raise PR for works/services to be done by contractors/vendors.
• Perform acceptance of services completed by contractor e.g. pest control, grass cutting, etc.
• Response to emergency call including after office hours e.g. power failure, fire incident, etc.

Requirements

• Diploma in Facilities Management or Mechanical/Electrical Engineering.
• Class 2/3 Driving license (preferred).
• Able to cycle and physically fit.
• More than 5 years’ experience in Facilities/M&E maintenance.
• Willing to work in Riffle Range (with shuttle services at Beauty World)

We are looking for a service technician responsible for installing, maintaining, and repairing equipment.

Job Description

• Maintenance and service of cleaning machines & robots
• Repair of machines
• Submission of monthly report
• Liaise with equipment suppliers
• Any ad-hoc assignment

Job Requirement

• Ability to work independently or as part of a team
• Previous experience as a service technician or in a related field
• Hands-on experience in installation, maintenance, and repair of equipment or systems
• Good organizational and time management skills to handle multiple tasks
• Adherence to workplace safety standards and protocols

Other Requirements

• Working Hours: 800am to 530pm (Mon-Fri, alternate Saturday)
• Working Location: East

RESPONSIBILITIES:

• Perform service & repair work on customer site for battery & charger
• Provides on-site technical assistance to help troubleshoot and repair equipment
• In charge of the delivery of batteries & chargers
• Preparation/maintenance of Motive Power batteries as per company SOP
• Packing/loading/delivery of batteries/chargers according to schedule
• All other activities required by superiors

The service technician shall possess the following competence:

• Simple inventory management skills.
• Ability to prioritize tasks & able to adhere to company SOPs
• Able to carry out tasks professionally and keep to the delivery & service schedule
• Safety-conscious
• Candidate must possess at least an "O" Level or equivalent.
• At least 1-2 Years of working experience in the related field is required for this position.
• Preferably Non-Executive specialized in Engineering - Others or equivalent.
• Must possess a Class 3 driving license. A forklift license is preferable but not a must.
• Able to do OT when required.

Working Hours: Monday - Friday 0830hrs to 1700hrs

Work Place: Tuas Ave 1 (Nearest Mrt: Gul Circle)

The candidate can drive the lorry back home (in Singapore only). The company will pay for the seasonal parking.

Job Description

• Industry/ Organization Type: Healthcare / Medical (Dental Laboratory)
• Position Title: Dental Technician
• Working Location: Novena
• Working Hours: 5 Days (Mon to Sunday 9am to 6pm, on Rostered work schedule)
• Duration: Permanent Role

Key Responsibilities

• Read and interpret doctors’ prescriptions.
• Download digital scans and upload files for fabrication.
• Operate CAD/CAM equipment such as milling machines.
• Create and perfect models from dental impressions.
• Build and repair dental prostheses such as crowns, bridges, onlays, and veneers, using both traditional and digital methods.
• Personalize dental prostheses to function correctly according to the prescription.
• Ensure all products meet quality standards before delivery.
• Work closely with team members, dentists, and dental partners to achieve the best results for patients.
• Manage and order dental materials and equipment.
• Maintain equipment, arrange for servicing and repairs when needed.
• Any other ad-hoc duties as assigned.

Apply Now

• Minimum GCE O Level, NITEC or equivalent
• Prior experience in a dental laboratory is an added advantage
• Competent with computer and smartphone applications/software

Primary Roles & Responsibilities

The patching cabling between network equipment and client’s network

The installation of power cables from equipment to power supply in rack/cabinet/closet

The installation, troubleshooting and de-installing IT equipment (Servers / Network /

Storage / etc)

o Install/swap out devices (e.g., phone, computers, cables, boards, edge routers, switches and etc.)

Complete all hard and complex Move, Add Change (MAC) requests within the defined service levels

Act as interface between client’s associates and management

Provide hardware break-fix services for network infrastructure

Perform onsite call-through, data, voice, website and security testing

Perform back-up testing to ensure all systems are connected to the client’s network as directed

Support carrier testing of circuits

Assist with facilities efforts such as vendor coordination and vendor supervision

o Power and uninterruptable power supply (UPS) restoral

o Water problems,

o Emergency cooling restoration,

o Fire suppression exercises, restoration, and post fire events

Support inventory management activities

o Receiving inventory

o Tagging of assets

o Tracking spares (crash kits)

o Ordering inventory

o Updating inventory records

o Prepare and return damaged equipment

Act as an interface, as needed, between associates at the applicable location and centralized project / operations / MAC management

Requirements:

Must be proficient in utilizing technical tools such as BERT testers, cable testers, and fiber testers.

Requires experience in working in communications closets

o Must be able to perform rack and stack activities

Must be able to safely lift heavy objects

o Must understand cable patching processes and procedures in copper and fiber

o Experience in either or both CommScope and Corning structured cables (copper and fiber)

o Must have a basic knowledge of data communications networking.

Must be able to assist in troubleshooting issues

Must understand network terminology

Requires good interpersonal communications skills

o Must be able to explain technical issues in a way the client will understand an

issue

o Must be able to interpret a client’s issue in a way that will allow technician to facilitate a resolution

Education/Experience Requirements

• 5+ years of experience in Data Centre operations and environment
• Must have a basic knowledge of local and wide area networking.
• High school Diploma or equivalent required

EA License no: 96C4864

Reg No: R23115903 Kong Yin Ching

Jason Marine Group Limited is a Maritime-centric Equipment and Service Provider based in Singapore, providing marine electronics and communications equipment/services and integration services for the commercial marine and offshore industries in Singapore, Asia and Europe regions.

We are seeking a Commissioning Technician to support the implementation of the design and installation of the marine electronics and communications equipment/services onboard shipping vessels, not limited to locally, offshore and overseas. He/ She will report directly to Commissioning Manager and the Energy Team in carrying out the following work and responsibilities:

• Support with implementation/ assembly/ design/ testing with system or/ and project Engineers.
• Carry out installation, termination, testing, troubleshooting, but not limited to Navigation, IT, Scada, Communication system and equipment in workshop assembly and onsite.
• Assist and/ or carry out Factory Acceptance Test & Site Acceptance Test with client.
• Contribute necessary improvements and offer advice about operational procedures.
• Work with the team to investigate problems and diagnose and repair faults, if any, in order for the equipment to work to its specifications
• Help out in the timely and accurate reports, documentation, timesheets, service reports as per company/ client format for submission and reporting.
• Work with the Service Department to resolve enquiries, if required.
• Any other associated tasks and responsibilities assigned from time to time.

Other Requirements

• Able to work under tight schedule and minimum supervision.
• Able to travel in short notice.
• Physically capable and available to work overtime including weekends and public holidays.
• Good verbal communication skill.
• Ensure a safe working environment.
• Experience in Telecommunication system in marine, shipyard, offshore is preferred. Job Title and Grade will commensurate with experience.
• Fresh candidates are also welcome as there will be onboard mentorship and On-Job-Trainings (OJT).
• Desirable overtime allowance after probation period.

Job Description:

As an Aircraft Technician, you will perform maintenance, repair and overhaul of aircrafts in one of the following trades:

• Mechanical (B1)
• Avionics (B2)
• Sheetmetal
• Cabin

Requirements:

• Minimum 2 years of relevant experience
• Relevant educational qualifications in Engineering field
• Willing to work on shifts

Jobsite.com Pte Ltd

Reg No: R22108762 (Joelle Foo)

EA Licence No: 00C3461

You will be part of our client’s Support & Services Field Service team responsible for preparation, testing, installation and commissioning of radar systems and preparation of technical documentation within the Defence and Security market.

Responsibilities

• Responsible for hardware and system installation, commissioning and testing.

• To provide troubleshooting, repair and maintenance activities.

• To prepare maintenance and installation documentations.

• To provide technical support to customers, by email, phone and on site.

• To generate service reports according to activities.

• To assist engineers as second engineer in installation, service, commissioning support worldwide.

• To undertake other ad-hoc duties when required.

Qualifications & Competencies

• Good knowledge on IT and communications systems.

• It is an advantage if you have experience in field support, installation, repair & maintenance of electronics and communications equipment, for example within radar or surveillance systems in aviation or marine related industry etc.

• ITE certificate or higher

• Basic mechanical skills is required

• Should be able to work at heights and be able to pass a Work-At-Height Course, which our client will provide for.

• Good command of written and spoken English and 1 local language.

• Willing to work long and irregular hours, including weekends when required.

• Required frequent regional travel for field assignments, approximately 50% of the year.

• Team player with good communication and interpersonal skills.

Salary: SGD 4,500 x 12 + AWS

Location: West, Singapore

Alternatively for immediate consideration, please send you resume to [email protected]

We regret that only shortlisted candidates will be responded.

Job Description & Requirements

Join our team where you will play a crucial role in the setup, installation, and maintenance of automation systems. We are seeking an individual to fulfill the following roles and responsibilities:

Responsibilities:

1. Machine Setup and Maintenance:Perform machine setup, installation, testing, troubleshooting, and replacements.

2. Fault Finding and Diagnosis:Attend to and carry out fault finding, diagnosis, and recovery of systems breakdowns, ensuring high levels of service and response times.

3. Work Schedule Adherence:Follow work schedules to specified standards and procedures, maintaining accurate written records.

4. Installation and Repair:Conduct installation and repair of machines to ensure optimal functionality.

5. Project Participation:Participate and/or lead Electrical, Instrumentation, and Automation (E&A) projects in the pilot plant.

6. Coordinated Project Management:Coordinate personnel and resources to meet E&A project objectives, ensuring timely implementation and budget adherence.

7. Technical Integrity:Ensure the technical integrity and performance of Electrical, Instrumentation, and Automation systems at all times.

8. Safety Compliance:Ensure safe installations and operations through proper design, protection systems, procedures, and training.

9. Collaboration and Issue Resolution:Collaborate with various departments to resolve Electrical, Instrumentation, and Automation issues in the pilot plant.

10. Documentation and Reporting:Ensure proper documentation (e.g., electrical, structural, and equipment drawings) is written and updated with each project.

11. Modification and Fabrication:Perform modification, fabrication, fitting, and installation for minor projects.

12. Travel Readiness:Be available for occasional travel to support industrialization processes in factories.

13. Facility Maintenance:Ensure facility building and pilot plant maintenance through continuous improvements and troubleshooting.

14. System Maintenance and Updates:Maintain and update electrical and automation systems and related documentation supporting pilot plant activities.

15. Monitoring and Safety Focus:Monitor plant and equipment for optimal operation while maintaining a strong focus on safety, including food safety.

16. Electrical Safety Standards:Manage, perform, and check all tasks based on Electrical Safety Nestlé Standards.

17. Inventory Management:Manage and control critical spare parts and maintain accurate inventoryrecords.

18.able to work on Weekend and PH

We thank you for your interest, and we regret that only shortlisted candidates will be notified. All resumes received will be used for recruitment purposes only.

EA License ID: 18C9520

EA Registration ID: R1765753

About the Company

Casa Creation is the authorized distributor for SK Magic, one of the world’s most advanced home appliance makers originating from Korea. Combining sleek design, effortless use, and amazing health benefits, we believe that our SK Magic product range - particularly state of the art water and air purifiers - are the fast-rising appliances of the future in today’s hectic yet discerning society.

Vision

Creating a clean and safe living environment, through the pursuit of fundamental health care.

Core Values

1. Health: We believe in creating a clean and safe environment, through the pursuit of fundamental health care
2. Eco-Friendliness: Our products reduce resource consumption, minimise pollution and reduces the production-use-disposal process.
3. Convenience: We aim to minimise labour for all our customers, creating a seamless experience and curating our products to suit each of your needs.

Responsibilities

• Install company water purifiers on-site, including set up of parts, troubleshooting, and quality checks.
• Perform routine maintenance, such as inspecting parts, checking, and replacing filters.
• Perform repair works as necessary.

Skills Required

• Minimum 1 year experience in plumbing or related technician work.
• Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
• Customer oriented with positive work attitude.

Other Requirements

• Possess a valid Class 3/3A driving license.
• Able to work 5.5 days a week.