About the Role:

To maintain the service education system for trainers and distributors. This includes training on repair processes, installation, maintenance, and troubleshooting, as well as introducing new products by preparing training schedules and materials. The role also involves promptly tracking technical inquiries and providing remote support to other Business Centres and distributors, ensuring that all administrative documentation is accurate and complete to enhance efficiency and service quality. Additionally, it includes planning and reviewing the Quality Management System to improve repair quality in the repair centre.

Roles and responsibilities:

• ·Conduct in-service training on medical devices and related products for trainers in other Business Centres and distributors, including:

o Repair processes (assembly and disassembly)

o Installation and maintenance processes

o Troubleshooting

• Prepare service training and manage the introduction of new product repairs, including training materials and schedules.
• Establish a service education system for medical devices and related products for engineers in other Business Centres.
• Address technical inquiries and provide technical support (installation, maintenance, etc.) to Business Centres and distributors, both remotely and on-site (e.g., at hospitals).
• Ensure proper documentation, notification, tracking, and follow-up on all technical inquiries.
• Support Business Centres and distributors with all service and technical-related inquiries and activities.
• Escalate issues to higher-level support when necessary and act as a contact point between Business Centres and headquarters.
• Plan and review the Quality Management Systems of repair centers to secure and enhance repair quality.
• Perform any other tasks as assigned.

About Olympus:

Our purpose at Olympus is to make peoples’ lives healthier, safer and more fulfilling. We do this through innovation. As a technology pioneer, we design and deliver solutions across our Medical division that make a positive contribution to society.

Our products are used to capture the medical and diagnostic images of our world, from the microscopic to the endoscopic. They are instrumental in furthering research, and for travelling inside the human body to help diagnose, treat and prevent illness.

Our commitment to customers and our social responsibility is the cornerstone of everything we do.

Why work at Olympus?

At Olympus, we are dedicated to fostering a high-performing culture, a collaborative environment, and enabling everyone to shine. Our common values of Patient Focus, Integrity, Innovation, Impact and Empathy, form the foundation of our culture and guide our behaviour, where our people feel like they are making a difference every single day.

Not only will you benefit from a meaningful, rewarding and challenging career, you will have access to a range of benefits:

• A competitive salary package including AWS and Variable Bonus
• Hybrid home office work arrangements
• 18 days of annual leave in your first year
• Health and Wellbeing initiatives (Annual Medical Checkups, Flu Vaccinations, Dental benefits, and Employee Assistance Programs)

What we are looking for:

• Diploma or Degree in any Electrical/Electronics/Mechanical Engineering Discipline
• At least 3 years of related experience in the medical device industry is highly preferred.
• Experience in technical support, including technical training.
• Experience with lean manufacturing and Six Sigma is preferred
• Strong hand-on skills and good eyesight.
• Willingness to travel to the Asia Pacific region if required.
• Proficient in the use of MS Office and its applications.
• Possess strong communication and troubleshooting skills.
• Able to work in a team environment and collaborate with staff across different age groups.
• A team player with enthusiasm for learning and the ability to work with minimal supervision.
• Strong troubleshooting and analytical skills.

Apply Now:

To submit your interest in this opportunity, select “Apply for this job”.

In the meantime, follow us on:

· LinkedIn - Olympus APAC

· Company website - www.olympus.com.sg

A site engineer is responsible for the planning, design, and construction of civil engineering projects, such as roads, dams, bridges, and buildings. They are responsible for many aspects of a construction project, including:

• DesignSite engineers evaluate the soil conditions, topography, drainage, and environmental considerations to ensure the design is implemented successfully. They also draft blueprints.
• ConstructionSite engineers manage the construction teams, subcontractors, and equipment on the site. They also ensure that the construction adheres to safety regulations and project timelines.
• Quality assuranceSite engineers perform quality assurance tests to ensure that the materials and workmanship meet the required standards.
• Technical adviceSite engineers provide technical advice during construction work and identify and resolve technical issues.
• CollaborationSite engineers collaborate with clients, construction crews, architects, designers, and other stakeholders.

Epsilon operates a global IP/MPLS network as well as supporting transmission networks. We are seeking a candidate with strong IP/MPLS skills and experience. The candidate would be responsible for ongoing network optimization and technological development for our global IP/MPLS network which support layer2 and layer3 VPN services. The candidate should also express a willingness to participate in projects related to transmission network upgrades and planning exercises.

Responsibilities

• Responsible for the deployment and management of the global MPLS and VPLS (E-Line, E-LAN and IP-VPN) infrastructure.
• Work with solutions design, and technical sales teams to develop complex service solutions for bespoke customer applications.
• Responsible for the deployment and management of the global IP transit, IP peering, and the connection to IXP and CSP.
• Work cross-functionally with product team and project management to generate implementation plans including Method of Procedure (MOP), Bill of Materials (BOM) and Scope of Works (SOW)
• Participate in optical transmission network upgrades and migrations as needed.
• To take up the on-call rotation and out of hours work when required
• Maintain technical and training documentation and develop automation as needed.
• Provide guidance and training to NOC when required

Requirement

• 5+ years of working experience in telecom provider, ISP, CSP or content provider.
• Experience working within a multi-vendor network environment – Juniper, Alcatel-Lucent/Nokia and Cisco are relevant.
• Experience working with network automation tools (Ansible, Python, Jinja, Git) a plus
• Extensive knowledge and experience in Layer 2 switching and Layer 3 routing technologies and protocols including TCP/IP ,OSPF, BGP/MP-BGP, IS-IS, MPLS and RSVP etc.
• Experience working and knowledge in security and firewall.
• Experience working and knowledge in SD-WAN/SASE is a plus
• Knowledge or prior working experience with optical networks is a plus, but willingness to learn and understand the design and operational aspects of transmission technologies is required.
• Demonstrated ability to meet deadlines among multiple concurrent projects
• An enthusiastic and helpful attitude
• Willing to learn new technologies
• Must enjoy working in a fast-paced environment where a strong ability to multi-task is necessary
• Must be highly detail-oriented

Overall Summary:

Mainly supporting security aspect like firewall checkpoint, security appliances - configuration, troubleshooting, capacity planning. Supporting current operation and deployment of resiliency project. This is a 2-year direct contract position.

Roles and Responsibilities:

• Directly reporting to Security Senior Manager
• Assist Architect team on new infrastructure design, implementation, and management of network solutions that form the core infrastructure, ensuring seamless integration across different platforms. This includes procurement of necessary equipment.
• To provide comprehensive product knowledge on the data technology required to deliver, support the networks infrastructure.
• Collaborate with the team to identify network and system needs, monitor performance metrics, troubleshoot, and resolve network-related issues, and implement improvements.
• Deliver project management for network activities encompassing upgrades, deployments, and migrations. Provide technical guidance and user support as required.
• Develop, maintain, and update documentation covering the network environment and operational procedures.
• Generate reports and detailed documentation outlining findings, implemented solutions, and recommendations for further enhancements.
• Oversee network environment to maximize performance, scalability, and minimize downtime.
• Closely coordinate and conform to Change Management policies, process, and procedures on any network changes.
• To implement approved changes, troubleshoot to identify root causes and implement effective solutions.
• Experience on Automating daily network tasks using scripting.
• Be available to provide on-call support as needed.

Qualifications/ Requirements:

• Minimum Bachelor in Computer Engineering or equivalent
• Must equipped with CCNP or CCIE
• Network Infrastructure & Hardware: 5+ years experience managing large enterprise network with a strong focus on F5, Palo Alto, Cisco, and CheckPoint Technology.
• Network Devices: In-depth knowledge and proficiency with switches, firewalls, load balancers, routers, and ISE.
• Network Design & Troubleshooting: Expertise in designing, monitoring, and network & incident management (LAN, WAN, VPN).
• Strong experience with automation tools: Ansible, Python - Automate in operation / project work before
• Experience with Deployment and automation, advantage to have experience building data center
• Proven track record of success in a fast-paced IT environment.
• Excellent communication and interpersonal skills, allowing you to effectively collaborate with both technical and non-technical stakeholders.
• Ability to work under pressure and delivery the project on time with minimum supervision.
• Certified and experienced with the mentioned technologies.

Summary

The OT Cyber Security Engineers is working in billion-dollar scale projects to safely and securely deliver the Digitalisation Strategy for our FPSO Facilities. Digital innovation requires operational technology (OT) systems to interact more and more with information technology (IT) systems. With the convergence of OT and IT Systems and network components comes increased Cyber security threats requiring focused attention and management.

You will be focusing on implementing and maintaining a defence in depth security posture and securely connecting previously isolated Systems and Equipment within OT networks to the Enterprise IT environment.

Additionally, to the OT integration piece, you will assist with the development and sustainment of robust processes and methodologies for data handling, which in-turn assists the management of tactical and strategic interactions between Technology & Autonomy and other business units across the organization.

MODEC is a part of the Mitsui Group, with 5000+ employees from 25 countries. Following the successful launch of digital capability in Brazil (https://www.modec.com/news/2020/20200115_pr_MV29-Lighthouse.html), our Singapore office commenced building digital team and promote Digital Transformation in 2021. You will work in this new “start-up” team in the professional, multinational work environment.

Our Singapore office occupies the top floors of The Metropolis Tower building, which provides scenic views of the city, and is located right next to the Buona Vista MRT station.

Responsibilities In EPCI Project

• Advocate, integrate and improve on existing technology change management process.
• Focal Point for Project related OT Cyber Security matters
• Research, design, and implements cyber security solutions for OT systems and products
• Contribute to Project Cyber Security Detailed Risk Assessment/s
• Establish and define Cyber Security Requirement Specification/s for FPSO Project’s
• Provide Cyber Security and Network Engineering requirements to Contractors, Vendors and suppliers
• Review and verify Contractors/Vendors/Suppliers design and deliveries
• Assist with Scoping, Development and Management of OT projects.
• Assist with Hardware Lifecycle planning and standardization.
• Liaising with key stakeholders
• Participates in project design reviews to ensure consistency with required business outcomes.

In Digital & Analytics Department

• Contribute to relevant Company policies/strategies/philosophies
• Analyse Operation Technology (OT) and Information Technology (IT) networks for opportunities to improve integration, network architecture and security.
• Provide architectural advice and oversight and input into selected Operational Application implementation projects
• Design, document and deliver technical Cyber Security solutions for OT within company and client enterprise architectures.
• Communicate effectively with, and between the immediate team, business subject matter experts, developers, analysts, engineers, end users of systems and management.
• Assists in responding to audits, penetration tests and vulnerability assessments

Key Skills

Domain Expertise – can be flexible

• Broad understanding of Technology Infrastructure and Applications that support FPSO Operations.
• Excellent communication skills with a strong technology focus.
• Ability to understand complex and detailed business processes.
• Bachelor’s or Master’s degree in relevant field of Engineering (With a strong knowledge of Industrial Automation Systems and Operational Technology)
• Understanding of Cyber Security standards (IEC, ISO, NIST or equivalent). Certified competencies highly regarded.
• Understanding of Network design and infrastructure used in both OT and IT realms
• Understanding of Industrial Communications protocols
• Understanding of Operational Challenges for Integrating and managing OT systems
• Understanding of Virtualisation, Server equipment and SAN Solutions (either in Use, Management or Design)
• Strong knowledge of common vulnerabilities and exploitation techniques
• Technical knowledge in Industrial network security; For example, firewall configuration, network monitoring, intrusion detection, etc.
• Strong problem-solving and trouble-shooting skills
• Good knowledge of System’s Engineering approaches, tools and their application

Individual Skills

• Has the ability to interface with, and gain the respect of, stakeholders at all levels and roles in the company
• Is a confident, energetic self-starter, with strong interpersonal skills
• Has good judgment, a sense of urgency and has demonstrated commitment to high standards of ethics, regulatory compliance, customer service and business integrity
• Instinctive and creative
• Self-motivated and possessing of a high sense of urgency and personal integrity
• Highest ethical standards and values

Ref ID: JT

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

SIA-NUS Digital Aviation Lab at the National University of Singapore (NUS) offers an exciting opportunity for a highly motivated Research Engineer (UX Designer/Researcher) within Work Package 4. The work package focuses on developing innovations in the following key strategic areas related to passengers’ inflight experience, mainly in Enhancements to SIA’s Cabin Seat Product Offerings, Novel Features for SIA’s Next Generation Aircraft Cabins for Sleep Improvement and Pushing SIA’s Superior Customer Experience to New Heights with an Advanced Connected Cabin.

The duties and responsibilities for this role includes working collaboratively with a multi-disciplinary team to develop and execute strategies that ensure the successful delivery of project goals outlined in the brief. As a UX Designer, you will be responsible fin supporting the team in developing innovative, desirable, and feasible design solutions and concepts that meet the business needs while bringing customer experiences to greater heights. One of the key role is to conduct research and develop new framework and strategies in new area of interest as identified by the PI.

As a UX Designer/Researcher, your key responsibility will be:

• Support the development of current and new projects.
• Conduct research and develop frameworks in new topics of interest as identify by the PI.
• Develop strategies such as probes, workshops, or teaching platforms to test and develop these frameworks.
• Conduct probes, workshops and teaching activities above.
• Data collections
• Assist PI in collating research material for communication and publication.
• Assist in conducting studies and experiments when necessary.

Requirements

The university values courage and creative, openness and engagement, inclusion and diversity, and respect and integrity. As such, we see the importance of recruiting talent aligned to those values and are looking for a suitable candidate who has:

• Bachelor’s degree in industrial Design, Design, Anthropology, Psychology, Sociology or related disciplines.
• Possess excellent interpersonal and communication skills.
• Strong organizational skills. Ability to manage projects with various stakeholders.
• Am comfortable in working within a self-directed culture and navigating ambiguity.
• Previously worked in projects related to delivering better customer experience or UI/UX experience is a plus.
• Proficient with prototyping software such as Figma, Adobe XD. Ability to CAD and handle 3D prototype is a bonus.
• Ability to conduct secondary research. Ability to analyze and syntheses research materials.
• Good writing and presentation skills.
• Openness to critique from other disciplines.
• Have empathy and curiosity for how great brands, businesses and organization navigate innovation and design.
• Experience with unique and novel research tools, methods of uncovering key insights, and proposing of new concepts.

Job Description

· Contribute to high-quality research and development work in TCOMS laboratory through physical experiments including:

o design of scaled physical test models, such as maritime vessels, offshore rigs, marine renewable platforms, and aquaculture systems for testing in TCOMS Ocean Basin.

o generation of detailed design, production, assembly, and as-built drawings of test models.

o Structural assessment of the test models as well as other support to be used in the experimental setup.

o Work with a team of engineers and technicians on model fabrication and modification, calibration, instrumentation, and experimental setup.

o enhance the measurement of models’ behaviour and response by use of appropriate sensors like load cells or custom strain gauges.

o document design processes, methodologies, and results.

o contribute to process enhancements for improved efficiency of research work.

· Perform research in the following areas:

o Offshore hydrodynamics

o Coastal Protection

o Structural response and health monitoring of Marine & Offshore platforms and floating structures

o Fluid-structure interactions

· Collaborate with internal teams, affiliated research institutes and other relevant stakeholders in proposal preparation and submission.

· Any other duties as assigned by supervisor.

Job Requirements

· Bachelor’s/ Master’s Degree in Civil Engineering, Mechanical Engineering, Marine Engineering, Offshore Engineering, or other related disciplines.

· Preferably 3 years of relevant research/industry experience with competent knowledge in some of the following areas:

- Offshore engineering, marine engineering, marine structures, hydrodynamics, naval architecture.

· Prior knowledge in the following numerical methods/software/programming languages will be an advantage:

- CAD software such as SolidWorks, Rhino, AutoCAD

- Engineering tools such as SESAM and ABAQUS

- Programming codes such as Python, MATLAB, or equivalent.

· Model experiments in wave flumes, wave tank or ocean basin.

· Good interpersonal and communications skills.

· Ability to adapt and work effectively as members of a team.

· Resourceful and self-driven with a high degree of professional integrity.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities:

· Git Repository and Toolchain Management: Administer multiple Git repositories across different locations and develop automation toolchains using Python and scripting languages.

· Manage and Configure Firmware SDK: Oversee configuration management for firmware SDKs, ensuring modular design, code consistency, and automated testing prior to releases.

· Lead Automation and CI Integration: Implement and manage automation pipelines, particularly with Jenkins, and integrate CI solutions throughout the SDLC to enhance efficiency and automation.

Requirements:

· Bachelor’s degree or higher in Computer Engineering, Computer Science, Automation, or a related field.

· Proven experience in firmware SDK configuration management with a focus on best coding practices, such as clean and modular design, and automated testing prior to software/firmware releases.

· Strong expertise in managing Git repositories, including ensuring code consistency across two or more repositories hosted at different locations.

· Strong proficiency in:

o C: For firmware configuration management.

o Python: For managing Git repositories and creating toolchains.

o Scripting: Proficiency in batch, shell, or similar scripting languages.

· Comprehensive understanding of the SDLC and the ability to integrate CI solutions into each phase to achieve high levels of automation.

· Experience with cybersecurity and intellectual property protection, will be a significant advantage.

· Extensive hands-on experience with automation pipelines, particularly Jenkins.

Job Description:

- Perform Civil, Structural Analysis and Design (entry-level) to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- Reporting to Senior Engineer

Job Requirements:

- Candidate must possess at least a Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 1 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

- Candidate with longer experience or qualifications will be considered for Senior Positions

Office Location : Tai Seng

Working hours : Monday to Friday | 8am to 6pm | Saturday 8am to 12pm

Salary (commensurate with experience) : Up to $5,000 + Variable Bonus + Annual Leaves + Medical Benefits

Industry : Construction Sector - A&A / Building Works

Job Responsibilities:

•Check and analyse drawings, authority requirements and tender specifications

•Check site installation whether it is in accordance to design and standards

•Check and prepare for discrepancies of drawings to be highlighted to consultant

•Oversee the projects and follow the terms and conditions of contracts. Ensure compliance to contracts and the drawings with regulatory specifications

•Able to coordinate with owners, architects, consultants, project managers, sub-contractors and suppliers.

Job Requirements:

•Candidate has at least 2 years of relevant working experiences that possess Degree in Construction, Civil Engineering and M&E or equivalent

•Entry level candidates are encouraged to apply ，as training will be provided.

•Knowledgeable in basic Autocad software

•Has positive attitude and sense of responsibilities

•Able to handle construction projects with commitment on work

•Good in communication and written abilities

•Required skill : Able to use Microsoft Project to present schedule to the clients

Maxhunt Resource Pte Ltd | EA Licence: 22C1322
Loh Wing Sheng | Registration No: R22110239

Job Description:

• Manage team of the site supervisors
• Appointed by QP(S) to be full time on site carrying out the duties of the QP(S)’s roles and responsibilities as required by BCA
• Site supervision/inspection of construction works
• Liaise with all parties involved in the project
• Monitor and ensure all works carried out as per specification/approved construction drawings
• Maintain & control site records as per BCA requirement
• Attend site meeting with Authority's Representative and Authority's Appointed Consultant project staff and assist in preparation of the meeting minutes and presentation with Station experience is required.

Job Requirements:

• Minimum eight (8) years of post-graduate experience as a civil engineer, of which at least three (4) years of experience in heavy civil/ structural engineering works. Experience in Station will be required.
• Degree in Civil Engineering recognised by the PE Board and qualification accredited by Joint Accreditation Committee of IES/ACES as Qualified Site Supervisor as defined under the Building Control Act.

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Functional Competencies:

1. Perform review of marine construction, equipment of drawings / document according to applicable rules, regulations and delegations.
2. Communicate and work closely with internal and external stakeholders and ensure contract requirements are met.
3. Support and provide technical advice to clients.
4. Participate in meetings (both internal and external) as required.
5. Support Equipment & Material Certification team and Consultancy Services team in drawing review, inspection or consultancy work, as and when required.
6. Attend all scheduled trainings (locally and overseas) and ultimately achieving specified delegations as agreed in Performance Management Process.
7. Ensure timely and accurate submission of time & expense sheets.
8. Keep up to date with new rules, regulations and technical information or process disseminated through internal communication.

Requirements:

1. Degree qualified in Naval Architecture, Marine Engineering or equivalent with minimum 3 years relevant working experience on Marine and Offshore related field.
2. Minimum delegation level 1 within area of specialization: Hull, Machinery, Electrical / Automation, Safety, Stability / TLO.

Thales Singapore Engineering Competence Centre (ECC) is a well-established R&D and engineering center serving major customers worldwide in Digital Identity and Security domains ranging from mobile connectivity, IoT, banking & payment to government solutions.

Thales DIS Digital Payment business line is seeking a mobile developer for our successful Mobile payment product.

Thales DIS -Digital Payment offers a simplified digital experience solution for proximity payment and e-commerce, allowing banks and businesses to offer a multi-channel and multi-device payment experience. This sophisticated solution that involves multiple web services and clients, offers a single platform that provides ready-to-eat, easy-to-integrate services while ensuring best-in-class security.

Responsibilities:

• Participate in design, implementation, and validation of mobile SDK and application within the R&D project team structure in accordance with institutionalized processes and delivery standards
• Participate in the design and development of mobile SDKs
• Contribute to the improvement of existing technology platform/baseline and development methodology through prototyping and patent proposal
• Troubleshoot and SL3 support for our customers

Requirements:

• Degree in Information Security / Electrical/Electronics/Computer Engineering, or related fields.
• Strong knowledge of mobile development in Android, especially on relevant core platform technologies.
• Proficient in Java, Kotlin
• Around 8 years experience working with mobile technologies
• Proficient in native development is a plus
• Strong interest in mobile applications ecosystem
• Knowledge of OO design and programming skills
• Knowledge of unit testing and test automation
• Experience with continuous integration and build automation Jenkins and Gradle
• Motivated self-starter, strong logical, creative problem-solving skills and excellent analytical skills

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Department of Chemical and Biomolecular Engineering, National University of Singapore, is inviting applications for 1 Research Engineer (RE) position under Associate Professor Sibudjing Kawi’s group. The candidate will work on A*STAR LCERFI research project entitled “Methane Pyrolysis for Hydrogen and Carbon Nanotube Production via Novel Catalytic Membrane Reactor System”.

Qualifications

Master degree in chemistry/chemical engineering in the area of catalysts, inorganic membranes and inorganic membrane reactors for high temperature reactions.

• Proven experience (with good research track record in terms of publications and/or patents) in the field of inorganic hollow fiber membrane synthesis, catalyst synthesis/characterization/testing for hydrocarbon pyrolysis and catalytic membrane reactor design.
• Strong team player skills and the ability to work harmoniously with a diverse workforce.

Responsibilities

• Responsible for the quality management of machined products to ensure that product quality
• Ensuring that our internal management systems are well defined and relevant in meeting international standards and customer requirements.
• Lead and monitor the QMS incl. ISO9001 & ISO 14001 quality system certification and promote continuous improvement.
• Lead the quality team to implement quality inspection and control and manage non-conforming products.
• Participate in supplier evaluation and management to ensure the quality of raw materials and purchased parts.

Requirement

• Minimum Bachelor Degree in Mechanical or Industrial Engineering
• At least 3 years of quality management experience in the machining industry
• Proficient in using office software and mintab statistical analysis software, and possessing Six Sigma quality management knowledge and skills, e.g. SPC tools & 8D reports.
• Strong knowledge and experience in leading ISO9001 & ISO 14001 quality system certification.
• Proficiency in English and Chinese, with the ability to communicate effectively with stakeholders in China.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a newly established joint-venture dedicated to building a 300mm semiconductor wafer manufacturing facility in Singapore. We are seeking passionate, resilient, and dedicated professionals to help us launch a promising future that will power the next generation of devices and systems. If you share our commitment to excellence and want to make a lasting impact, join us and be part of something extraordinary!

Key Responsibilities

• Lead the conceptual design and RFP preparation for the Tool Installation/Hookup in a 300mm semiconductor fabrication plant.
• Supervise and track the design progress of Tool Installation/Hookup contractors and design consultants.
• Manage on-site construction schedules and oversee the commissioning of the Tool Installation/Hookup package.

Education Qualification & Essential Experiences

• Bachelor's degree in Electrical/Electronic Engineering or a related field.
• Experience with Tool Installation/Hookup in semiconductor 300mm fab facility.
• Familiar with 3D CAD design, Tool Hookup Connection, platform installation and tool move in are preferable.
• Proficient in computer software such as Microsoft Office, Microsoft Project, AutoCAD, Autodesk Revit etc.
• A proactive attitude and strong teamwork skills, with experience in construction projects.

Key Skills and Attributes

• Strong interpersonal and communication skills, with the ability to collaborate effectively across functions and teams from diverse backgrounds.
• Excellent analytical and problem-solving abilities, focused on delivering positive outcomes.
• Goal-oriented and a team player, able to perform under pressure in a fast-paced, dynamic environment.
• A growth mindset, prioritizing adaptability, resilience, innovation, and continuous learning to meet business needs.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Duties to be Performed:

Senior Mechanical Engineer for HVAC Systems shall be handling on designing and delivering mechanical systems for industrial properties in semiconductors, electronics, biopharma, and related industries.

The mechanical systems include Cleanroom, HVAC, Process exhausts, vacuum, condenser, chilled water, process and process cooling water, fire protection, diesel fuel, natural gas and associated, equipment, ducts and pipe works.

The Duties/ Responsibilities of the Prospective Candidate are,

• Responsible for Engineering of Concept / Basic / Detail design for Mechanical systems with the focus of HVAC systems.
• Shall perform system related engineering calculation including heat load calculation, equipment sizing, distribution system sizing from fundamentals with spreadsheet tools.
• Shall develop design drawings including, but not limited to, PFD, Schematics and Layout for required HVAC systems.
• Engineering design of HVAC and Process Exhaust systems for new/ existing production buildings.
• Conduct feasibility study and conceptual design of Mechanical Systems throughout all technological aspects
• Review of HVAC system in preparation for testing and commissioning and validation
• Coordination and engineering in regards of R&D Equipment requirements
• Provision of engineering service for tendering, conduct site show round and brief bidders
• Develop a detailed project plan to monitor and track progress
• Create and maintain comprehensive project documentation
• Meet with clients to take detailed ordering briefs and clarify specific requirements of each project
• Coordinate internal resources and third parties/vendors for the flawless execution of projects
• Clearly define and align inter-discipline technical interfaces and scope demarcation
• Work with CAD drafters and BIM modeler to guide, check and carry out field verification with them.
• Prepare SOW (Scope of work) for bid package, including BOM for form of tender.
• Calculate system OSE (Operating System Efficiency) of chilled water system to meet MEES requirements.
• Frictional loss calculation for fan and pump head and estimation of power requirements.
• Perform psychrometric analysis on system design
• Trouble shooting of design and construction related problems and develop solutions accordingly
• To promote safe working practices and to protect the health and well-being of Employees, contractors and Customers.
• Liaising with QA / QC Engineers to ensure they are aligned with the requirements of the specification.
• Support during construction stage

Job / Skills Requirement:

• You should have a bachelor's degree in mechanical.
• You should have sound experience in mechanical systems in designing and installation works related to semiconductors, biopharma, laboratories, data centers, or process buildings.
• You should be familiar with both Singapore and Malaysia’s latest codes, standards, guidelines, regulations, and authorities requirements. Your familiarity with available equipment, modern technology, construction methods, and CAD/ BIM is an added advantage.
• You should be able to advise clients and engineers on project execution, supervising progress, and quality of work.
• Able to Travel/ Relocate

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Quality & Product Engineering diverse team of talent. You will be responsible for Quality control for Facilities and Fab use - UPW, Chemicals, wafers, Fab Environment and Incoming quality check of materials.

What you will be working on:

• Liaise and support fab engineering modules on requirements for ad-hoc requests
• Communicate to end user and follow up for OOC/OOS issues
• Manage, maintain and verify functionality of equipment and perform troubleshoot where required
• Responsible and accountable for work quality and integrity in all assigned tasks
• Participate in continuous improvement programs/ initiate action for continuous improvement in work processes, safety and quality standards
• To monitor and improve the performance of analytical tools and methods for analysis
• Responsible for safety and housekeeping of Lab work areas and environment
• Update in meetings for Pre alert/ Out of control/ shutdown cases
• Update and maintain documents for Lab operation and analytical tools
• Update and reporting of lab operation and issues
• In charge of arrangement for Lab manpower
• Internal audit of lab

More About You:

• Degree in Chemistry/ Material Science or equivalent
• 1- 3 year experience in semiconductor, manufacturing, Chemical Lab or/ and quality related experience preferred
• Basic to intermediate knowledge of analytical techniques
• Knowledge of Microsoft Excel, Win Word, Powerpoint, Tableau and Excel VBA
• Knowledge of requirements IATF16949, ISO17025, ISO 14000, OSHA 18000 will be an added advantage

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Quality & Reliability Engineering diverse team of talent. You will be responsible for end-to-end notification and communication process on product and process changes.

What you will be working on:

• Responsible in managing the end-to-end notification and communication process on product and process changes.
• Responsible in ensuring that changes are effectively communicated to customers through working with various stakeholders including the account facing teams & process owners.
• Be the Facilitator of engineering change requirements to ensure that both internal and customer requirements must be met.
• Manage the ECN scorecards with respect to implementation and closure with the relevant stakeholders.
• Tracking implementation progress and reporting back to management.
• Be the Facilitator for customer concessions and work with internal stakeholders/customers until concession closure.
• Participates in inter-departmental cross-functional projects.
• Analyzing common problems / root causes with possible suggestions for further improvements.

More About You:

• Degree in Chemical Engineering / Chemistry / Materials Science / Physics / Electrical & Electronic Engineering or equivalent.
• Minimum 3 years of relevant experience in semiconductor or automotive industry.
• Preferably with experience in SPC tool.
• Preferably with experience in Change Management & Concession Management

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job Summary:

Drives the design chain value proposition by generating the greatest number of Xilinx design wins in technologies and registrations for customers engaged in Xilinx based product design resulting in growing business. Interface with the engineering departments of customers and suppliers. Performs a variety of product, technical and engineering functions including but not limited to: pre/post sales support, research, design and development.

Principal Responsibilities:

• Work with sales to explore new customer base which use Xilinx products.
• Deliver technical solutions / proposals and provide product presentations to customers.
• Provide technical support to customer which are using Xilinx products from start of development to design win closure.
• Provide technical training to customers
• conduct seminars and workshops
• Willing to travel
• Must be proactive and constantly striving to keep abreast of latest advances in Xilinx technology.

Job Level Specifications:

• Must be highly motivated and able to work independently
• Strong interpersonal and communication skills.
• Good team player
• Good analytic and problem-solving skills
• Integrity & Trust
• Excellent in time management.

Work Experience:

• Minimum 3+ years work experience in Programmable Logic based design / ASIC / Processors / GPU
• Proficient in VHDL/Verilog/C++ programming
• Experience working on AI solutions development using Caffe, Tensorflow, Keras, Pytorch frameworks is a strong plus.
• Experience working on systems in one or more of the following areas is a highly desired: Software Defined Radios, Wireless Communication Systems, Artificial Intelligence,.

Education and Certification(s):

• Bachelor's or Masters Degree in Engineering or equivalent.

Job Description

• Candidate must possess at least Bachelor's Degree in Engineering (Civil & Structural) from local or recognized foreign universities subject to Client's approval
• 2 years & above working experience in the related field is required for this position
• Perform Engineering Design and drawings
• Project coordination and documentation
• Perform building/site inspections.
• Attend progress meetings.
• Work related travel and meetings
• Any other duties as assigned

Job Requirement

• Keen to learn and work independently with minimum guidance.
• Able to work under pressure, dynamic, creative and results oriented.
• Conversant in regulatory requirements and building codes.
• Good knowledge of AutoCad and Revit.
• Possess Class 3/3A driving license preferred.

Job description

• Carry out Indoor Air Quality monitoring
• Carry out Industrial Hygiene monitoring
• Carry out Noise monitoring
• Preparation of test reports

Requirements

• Degree in Environmental / Chemical / Mechanical Engineering or related field / certificates
• For fresh graduates / candidates with no experience, training will be provided
• Willing to work in outdoor environment, testing and monitoring is carried out at customers premises
• Proficient in Microsoft Office
• Class 3 license preferred

Optics are critical at KLA and at the core of our tools that are finding defects on wafers and reticles that aren’t visible with the human eye. We do this by using different light sources and nanophotonics to capture images. As an optical engineer at KLA, you’re responsible for developing ultra-high precision optical systems and component designs for complex systems, conducting key optical simulations, modeling and analysis as well as identifying manufacturing issues and developing solutions for these.

Responsibilities:

• Facilitate the optical specifications, lens design, and supplier integration of new optics enabled products for the Optics Development Engineering group.
• Effective use of Code V or Zemax to design low residual aberration generating imaging lenses, relays, spatial/polarization beamsplitters and zoom lenses both from nominal design process to final Monte Carlo tolerance analysis and error budgeting.
• Construct complex system models using above components having all imaging paths with critical parameters needed to produce accurate and efficient raytracing simulations of Strehl/WFE performance, coherent and incoherent PSF size/shape, focal depth of field and pupil, multiple bounce ghost and non-sequential stray light analysis, and polarization ray tracing to quantify transmission, retardance, diattenuation.

Education or experience should include:

• Designing, modeling and analyzing optical systems
• Optical manufacturing processes
• Code V or Zemax Optical software advanced user
• Statistical lens tolerancing
• Ghost and stray light analysis
• Design for manufacturing based on capabilities of Optical metrology
• Specification of precision opto-mechanical assemblies; and
  Data analysis using Matlab or other programs. Any suitable combination of education, training, or experience is acceptable.

Minimum Qualifications

• Doctorate (Academic) Degree and 0 years related work experience; Master's Level Degree and related work experience of 3 years; Bachelor's Level Degree and related work experience of 5 years

Process Engineer (Pick and Place) is responsible for development and establishment of production process.

Responsibilities

• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line in Pick and Place Process.
• Establish, review and update specifications, workflow, quality and safety related documentation for production line.
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Process sustaining and control through SPC and periodic defect Pareto Analysis.
• Lead and drive SPC control towards zero defects.
• Review and update FMEA, Control plan OCAP with cross-functional teams.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
  • New material, process & machine development and qualification.
  • Handle and manage customer audits and 8D reports.
  • Provide disposition for engineering and production lots.
  • Conduct process characterization and qualification to establish process baseline.

Requirement

• Minimum Degree in Electrical & Electronics, Microelectronics, Mechanical engineering or relevant engineering discipline
• Experience in Semiconductor manufacturing industry & working in cleanroom environment
• Minimum 3 years hands-on process experience in area of in the Wafer-level Fanout packaging production line or LCD/FPD production line in Pick and Place Process.
• Experience in SPC, DOE, FEMA, and 8D reports