JOB SCOPE & JOB RESPONSIBILITIES

• Design for single line diagram, electrical distribution system, small power, street lighting, compound lighting, ELV etc
• Determine the cable sizing & design routing for sub-main cabling and conduit/trunking wiring.
• Selection for cable, circuit breaker, transformers, UPS, VFD, generator.
• Supervise electrical Installation, testing and commissioning.
• Preparation of project documents including technical proposal, load list, cable schedule, cable routing, switch-room layout, load flow, etc.
• Prepare the BQ for the RFQ.
• Fault and short circuit study, harmonic analysis.
• Preparing specifications and datasheet for RFQ and review offers from vendors for compliance to technical specification, compliance with codes and regulation.
• Prepare documentation for submission and supporting project team on plant start-up, performance test, and optimization.
• Perform the cable sizing calculation and the voltage drop calculation.
• Supervise electrical Installation, testing and commissioning

JOB REQUIREMENT

• Bachelor's degree in Electrical & Electronic engineering.
• Minimum 3 years work experience in process plants or in the water/wastewater industry, with good knowledge in electrical desgin of water and/or wastewater treatment plants.
• Familiarity with AutoCAD, Navisworks.

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner.

• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other).

• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications.

• Assess potential risks, materials and costs.

• Provide advice and resolve creatively any emerging problems/deficiencies.

• Oversee and mentor staff and liaise with a variety of stakeholders.

• Handle over the resulting structures and services for use.

• Monitor progress and compile reports in project status.

• Manage budget and purchase equipment/materials.

• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required.

• Working with a team of fellow engineers and construction crews to organize and complete projects.

Job Description:

• Develop and maintain backend services and APIs.
• Collaborate with frontend developers to integrate user-facing elements with server-side logic.
• Write clean, maintainable, and efficient code.
• Participate in code reviews and provide constructive feedback.
• Troubleshoot and debug issues in production and development environments.
• Contribute to the optimization of application performance.

Requirements:

• Bachelor’s degree in Computer Science, Engineering, or a related field.
• 1-3 years of experience in backend development.
• Proficiency in one or more programming languages such as Go, Python, Java, or Node.js.
• Familiarity with databases (SQL and/or NoSQL).
• Knowledge of RESTful APIs and microservices architecture.
• Strong problem-solving skills and attention to detail.

Responsibilities:

• Able to plan, execute, monitor, control and manage project works that are assigned.
• Manage or work with operations teams including engineers, supervisors, and workers to complete the entire project scope.
• Preparation of documentation including but not limited to risk assessment, project status report, method statement, work procedure for the project, quality control, etc.
• Cost control of the materials and labour.
• Liaising and coordinating with all parties such as clients, consultants, consultants’ representatives, site supervisors, sub-contractors; to ensure smooth, timely and successful completion of the project.
• Attend site meetings, inspections, safety meetings, etc.
• Ensure that all the construction safety rules and regulations are being observed.

Requirements:

• Must possess at least a Degree in Engineering (Civil) and is familiar with the British, American Design Standards, and Eurocodes.
• Must possess good communication skills (Written and Verbal).
• Have excellent problem-solving abilities and interpersonal relationship skills.
• Good team player and customer-focused, able to work with all levels on site.
• Able to work independently under pressure with minimum supervision.
• Only candidates with degrees recognised by the Ministry of Manpower, Singapore need to apply.

As a Cloud DevOps Engineer, you will run and support the company’s software application infrastructure in the cloud, ensuring the optimized use of resources to scale.

What will you do

• Design, develop, and implement cloud infrastructure as code using Terraform.
• Manage and optimize cloud resources for cost-efficiency and performance.
• Secure infrastructure by implementing best practices and adhering to security compliance standards.
• Implement robust monitoring and alerting systems for infrastructure resources.
• Collaborate with developers and operations teams to integrate infrastructure changes seamlessly into the software development lifecycle.
• Champion DevOps best practices for cloud infrastructure management.
• Setup, monitor and support CI/CD pipeline on premise or in the cloud.
• Stay up to date on the latest AWS services and Terraform features.

What do we expect

• Proven experience as a DevOps Engineer with at least 3 years of experience (with a focus on AWS cloud infrastructure).
• Implementation proficiency in service control policy and account governance (Control Tower, OU management, etc.).
• Enable and configure AWS VPC flow logs, load balancer logging, direct connect, AWS VPN, TGX etc.
• Experience managing Unix/Linux environments.
• Extensive experience in scripting in languages such as Python/Ruby/Perl and shell scripting.
• In-depth knowledge and experience with AWS services (EC2, S3, VPC, IAM, etc.).
• Expert-level proficiency in Terraform, including writing reusable modules and leveraging best practices.
• Able to troubleshoot infrastructure issues in cloud, identify root cause and implementation improvement and fixes.
• Good knowledge of microservices architecture, container technologies (Docker, Kubernetes).
• Expertise in Git and GitOps philosophy.
• Good people skills, teamwork, collaboration with cross function and cross-geo teams.
• Self-motivated, willing to learn new technologies continuously.
• Maintain documentation for design, integration, testing, and deployment.

Good to have

• Relevant DevOps certifications (e.g. AWS).
• Some experience with other cloud providers like Azure and GCP.
• Experience with CI/CD pipelines and integrating infrastructure provisioning with development workflows.
• Knowledge on mobile and web applications development.
• Knowledge of big data and data analytics infrastructure in cloud.

Summary

Equipment Engineer is responsible for the installation, troubleshooting and maintenance of production equipment.

Responsibilities

• Initiate meeting within the team or with cross functional counterparts to resolve complex integration issues and chronic hardware issues.
• Manage and plan new equipment start-up to support production, from facilities hook-up, vendor startup, to acceptance of equipment for production.
• Establish Preventive Maintenance (PM) plans for all equipment taking into account safety and optimize PM for quality, cost, and productivity. Including spare review, planning, budgeting and tracking.
• Establish and document work process and conduct self-audit to ensure specifications meet company Quality Standard requirements.
• Possess knowledge on SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness.
• Familiar and follow up on SPSR, MRB, 8D, TECN, ECN ISO9001/QS9000/TQM documentation for closure of issues / setup system.
• Any other ad-hoc duties as assigned.

Requirement

• Minimum bachelor's degree in Electrical / Electronics / Mechanical / Mechatronics Engineering
• Hands-on experience in equipment maintenance or troubleshooting
• Experience in a semiconductor/electronics/electrical manufacturing industry preferred
• Fresh graduates are welcome to apply

Key Responsibilities:

• Project Management including project scheduling, execution and handling over of commissioned system
• Project lead and ensure smooth deployment
• Top monitor project resources, budget, schedule and scope of work
• Provide technical expertise on site to troubleshoot and propose the best solution for our clients
• Conduct preventive maintenance to ensure optimal performance of equipment.
• Propose and recommend improvement projects to clients to upgrade existing equipment performance.
• Attend to site installation, equipment breakdown and servicing, and emergency requests from client
• Collaborate with cross-functional teams to deliver exceptional after-sales support to our clients
• Utilize your technical know-how to identify, diagnose and repair complex issues efficiently.
• Other ad-hoc duties

Qualifications:

• Must possess a minimum Diploma in Engineering (Mechanical / Electrical / Automation) or equivalent.
• Minimum 3 years relevant experience required and knowledge related to electromechanical control & automation.
• Programming skills and understanding in PLC & Robotic Control.
• Strong analytical and problem-solving skills.
• Excellent communication and interpersonal skills.
• Ability to work independently and as part of a team.
• Travel, often on short notice, to customer sites to resolve problems or support other team members.
• With class 3 driving license.
• Regional travel experience.

Job Descriptions

• Pre Project site evaluation of electrical product/meter location and perform range test
• Develops wiring diagrams, layout drawings, and as built drawings for system or equipment modifications or expansion and directs personnel performing installation and maintenance duties.
• Installation, testing and commissioning of repeaters or wireless devices
• Follow safe work procedures to remove/ Install electrical products/meter on site
• Conduct Testing and commissioning of installed electrical products
• Ensure Testing and Commissioning reports in proper order
• Preventive Maintenance (Thermoscan/ Eeprom Downloading/ Data/System Backup)
• Perform troubleshooting and perform appropriate corrective solutions for operational equipment where appropriate
• Soldering of electronics parts
• Internal wiring/ assembly of electrical products/meter
• Burning of firmware
• Testing of defective meters
• Project Coordination to ensure works being carry out as per schedule given by working with partners or contractors
• Manage enquiries, feedback and any other operational issues
• Carries out Site survey, Project management, documentation, testing, user training and commissioning
• To ensure timely completion of schedules and new projects start up through efficient coordination of all function groups both internal and external.
• Team player

Requirements:

• Minimum ITE, NTC/ITC, NITEC in Electrical Engineering or any similar qualifications
• Ability to read and comprehend electrical drawings
• Knowledge of firmware is a plus
• Ability to multi-task and effectively manage concurrent initiatives
• Strong interest in electronics engineering and firmware
• Ability to work effectively in a dynamic working environment.
• Applicant must be willing to work during weekend when required.
• Able to draw Autocad (Would be advantage)
• Minimum 3 years relevant experience

Only shortlisted candidates will be notified.

As a Software Engineer (C++ / C#), you will be a critical team member and fully responsible for developing graphics components for our products. In this role, you will work closely with product managers, UI-UX designers and the R&D team to collaboratively solve real-world problems.

What will you do

• Design, build and maintain efficient and reliable software modules for Screening Eagle software products.
• Develop tools for real-time interactive 3D graphics applications.
• Assist other team members to implement next generation NDT solutions.
• Collaborate with team members to integrate the components to desktop, mobile and web platforms end products.

What do we expect

• BA/MA/MS/PhD degree in Computer Science, Computer Graphics, or strong experience in 3D Games / 3D experiences.
• Proficiency in C++11 and above.
• Proficiency in C# and Unity.
• Good understanding of software design patterns.
• Good knowledge of data structures and algorithms for OOP.
• Good understanding of memory management in non-garbage collected environments.
• Familiar with memory and CPU usage optimization.
• Familiar with 3D graphics pipelines and optimization techniques.
• Solid linear algebra knowledge.Experience in developing for and integrating third party software on desktop, mobile and web tech stacks.

• Involve revese enginnering based on part given.
• Create the part drawing from the component by measuring and prepare the new cnc program.
• Lead a programmer and machinist to successfully deliver the cam program for precision machined component projects
• Work closely with senior management to prepare quotation and concept dedign for new projects
• Prepare and track schedules for live projects - manage deliverables targets by designers and drafters
• Train and groom new Cnc 3d cam programmer / machinist in company
• Create, maintain and enforce workflow processes to enhance design department efficiency
• Manage team KPIs

Pre-Sales Solution Engineer

Our Sales team is the driving force behind our company's growth, handling the entire sales cycle from prospecting and business development to expanding our services with existing clients through effective account management. We pride ourselves on our dynamic, fast-paced, and multicultural environment, where ambition and innovation thrive.

What is the role about?

We are now searching for an experienced Pre-Sales Solution Engineer to provide technical knowledge, advice, and support to sales representatives and customers during the sales process to resolve requests regarding products and technical issues and to maximize the benefits derived from the organizations’ products and or services.

Key responsibilities:

• Provides presales technical expertise to the Product teams and customers.
• Provides technical input into projects and technical documents and identifies additional sales opportunities with existing customers.
• Installs and demonstrates the products at customer sites.
• Collaborates with product teams to develop and recommend products and services to meet customer’s requirements.
• Assist customers to identify their technical specifications and determine what documentation is required to incorporate the organization’s products into customer applications.
• Maintains up-to-date and comprehensive knowledge of the organizations and competitor’s products and/or services.
• Writes blogs, white papers, and other technical material to promote the products and technical capability of the company.
• Helps the customer, if needed, in the implementation of the new products and makes sure the defined specifications are in place and helps implementing them.

Who are you?

• 7 - 10 years of Technical Solution experience within IT (mainly Cloud)
• BA/BS degree in Business Administration, Sales, or a relevant field
• Experience in the IT Industry (IaaS)
• Experience in writing blogs, attending events, and making presentations.
• Experience working cross-functionally with internal and external stakeholders.
• Fluency in English and one Asian language (both, verbally and in writing) to liase with stakeholders in the region.
• SAP experience is a plus.

Benefits:

• Competitive salary + AWS + annual bonus scheme
• The possibility to develop yourself and build your career
• Comprehensive Health Insurance
• 18 days paid time off
• Multi-cultural work environment (our colleagues are from over 60 countries!) in a company where you can truly make a difference

Ready for the next step?

If you’d like to apply, please do so online. To learn more about us, follow us on LinkedIn or Instagram to get an inside look at life at Leaseweb. For questions, please reach out to Danisha Ardilla, Talent Acquisition Specialist, at: [email protected]

ROLE DESCRIPTION SUMMARY

Thales is seeking suitable candidate for the position of Engineer (System Security).

You will be looking after the governance of the infrastructure and systems for mission-critical Command and Control (C2) system that Thales Solutions Asia (TSA) have developed for government agency. You will be part of a team to manage the security of system, to ensure the system adhere to the security policies, and is well protected from any threats, risks or exploits.

KEY ACTIVITIES AND RESPONSIBILITIES

As aSystem Security Engineer, you are accountable for:

Provide security expertise and management services to support Authority in activities such as:

· Internal / external audits (IM8, Cybersecurity, etc)

· Policies compliance (IM8, Cybersecurity, etc), work with vendor on:

- Vulnerability management compliance reports and patch reports

- Filing of documents and Security Scorecard for audit purpose, to produce it as required

- Monthly logs review. E.g., privilege user activities

- Vulnerability/ Compliance Assessments

- Penetration Tests and Source Code Reviews

· Disaster Recovery (DR) and Business Continuity Planning (BCP):

- All relevant activities related to the DR and BCP planning

- Checks on system backup completion by vendor and datacentre

- Document update and implementations.

· ICT/Threat Risk Assessments (TRA)

· Monthly reviews of privileged accounts and non-privileged account, disable inactive accounts

· Seek security waivers (IM8, Cybersecurity Act, Circulars etc)

· Circulate security notifications/alerts to vendors and ensure status updates too all stakeholders including cybersecurity centre

· Security monitoring/tracking:

- Monitor alerts from SOC

- Update stakeholders regarding SOC alerts

- Review compliance reports with vendors to ensure that system is compliant

- Manage, track and update any security incidents/ issues to all stakeholders

- Review Incident Report (if any)

· Patching:

- Ensure patches are tested and verified before seeking approval for patching downtime

- Communicate system downtime to all stakeholders

- Ensure system availability after patching is completed

· Obsolescence management for software licenses, hardware, operating systems and certificates

· Security enhancement/ integration

· Support the submission of security clearance for related vendors

· Perform other related duties as assigned or requested

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

· Working hours will be 0830 hrs to 1800 hrs (for Monday to Thursday) and 0830 hrs to 1730hrs (for Friday), excluding weekends and Public Holidays

· Outside of working hours, to provide online support via emails and group chats when required based on the priority and severity of issues related to the system

· Able to cope in a highly pressured fast-paced environment

· Prior working experience in cyber security and vulnerability management is preferred

· Strong knowledge of security principles, best practices, and industry standards, such as NIST, ISO 27001, and CIS Critical Security Controls

· Able to understand security posture of systems

· Prior working experience in Project Management is a plus point

· Able to understand the system and software architecture, and user operations environment

· Willingness to pick up any new technologies

Education

Diploma or Bachelor’s Degree in Cybersecurity/ InfoSec/ Information Technology / Information Systems / Business IT or its equivalent

Relevant professional certifications, such as CISSP, CISM, CEH, or other security certifications

Experience

Minimally 1-2 years of experience in cybersecurity and supporting mission critical systems with very stringent SLA e.g. 99.9%

Well-versed in cybersecurity best practices and establishing of its policies

Well-versed in IT Service Management (ITSM) standards, processes, guidelines and best practices

Position: Senior/ Junior Software Engineer

Campus: DigiPen (Singapore)

Description:

We are hiring a team of software engineers to design and develop software platforms for supporting multi-user AR/VR applications.

Salary Package for 2 years:

• Salary range: $4,000 - $8,000 per month
• 13th-month bonus
• Health and dental insurance

Role:

• Design and develop AR/VR software solutions for online education, team collaboration, and workplace training with a focus on real-time interactive simulation.
• Build infrastructure for real-time interactions, scripting tools, backend web services, and frontend applications.
• Design and implement spatial interactions using 3D game engines, modelling animation tools and shader programming

Educational and Experience Requirements:

• A degree in Computer Science or relevant field
• Strong knowledge in C++
• 3D engine development experience
• Familiarity with core engine technologies such as engine architecture, multi-threading, streaming, computer graphics and advanced real-time rendering techniques
• Experience developing optimized modules in C#/C++ within Unity and/or Unreal Engine
• Experience with database management systems
• Experience with software development life cycle
• At least 5 years of work experience in a similar capacity to qualify for the senior position

Application:

To apply, please submit your updated resume and relevant portfolio with the subject line “Senior/ Junior Software Engineer” sent to:

Dr. Tang Liang

Associate Dean of Academic

Email: singapore-jobs(at)digipen.edu

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Electrical and Computer Engineering (ECE) Department at the National University of Singapore (NUS) is seeking qualified applicants for the position of Research Engineer to join our team and contribute to our ongoing research projects related to IC design.

Responsibilities:

• Explore heterogeneous systems with silicon chips being integrated on unconventional substrates such as flexible and stretchable, for ultra-low power always-on and intelligent silicon platforms.
• Work on innovative circuit techniques with very wide power-performance scaling to minimize the system energy while providing targeted levels of performance on demand. Such techniques will be investigated for digital sub-systems in advanced technologies.
• Be responsible to conduct research at the circuit level, defining and validating design options and defining new integrated circuit techniques.

We offer a competitive salary commensurate with qualifications and experience, along with a stimulating research environment and access to state-of-the-art facilities. This is a full-time position with an initial contract duration of 12 months, with potential for renewal based on performance and funding availability.

Qualifications

The candidate must possess:

• Possess a Bachelor/Master’s degree in either Electrical Engineering or strictly related (e.g., Computer, Communication, or Information Engineering).
• Activity performed in multiple research environments and industrial experience are highly valued.
• Expertise on the project scope, ultra-low power always-on and intelligent silicon platforms.
• Knowledge on circuit and system-level chip design is valued.
• Analytical and problem-solving skills.
• Open to fixed term contract.

• PLC & HMI system design and develop applications that effectively accomplish objectives and needs
• Analyse and edit existing PLC applications to improve functionality
• Test & simulate PLC applications extensively to ensure they are error and bug free
• Liaise with customer/end-users to identify technical requirements and develop solutions
• Create and present application prototypes that align with requirements
• Problem solving and troubleshooting skill
• Identify and evaluate technology solution to fulfil system requirements
• Determine project constraints including estimated time and costs
• Perform maintenance, troubleshooting and calibration on machines & equipment.
• Other duties/activities as assigned by management

Job Summary:
We are seeking a motivated and detail-oriented Fab Reliability Engineer to join our dynamic team. The ideal candidate will play a crucial role in ensuring the reliability and performance of our manufacturing processes. This position involves process qualification, conformance, process change management, new process development, and wafer-level reliability testing to enhance our production capabilities.

Key Responsibilities:

• Process Qualification: Conduct thorough evaluations and validations of manufacturing processes to ensure they meet reliability standards and specifications.
• Conformance: Monitor and analyze process performance to ensure compliance with established quality and reliability metrics.
• Process Change Management: Lead and manage process changes, ensuring that all modifications are documented, validated, and communicated effectively to relevant stakeholders.
• New Process Development: Collaborate with development teams to design and implement new manufacturing processes.
• Wafer-Level Reliability Testing: Design and execute wafer-level reliability tests to assess the performance and durability of semiconductor devices under various conditions.
• Data Analysis: Utilize statistical tools and methodologies to analyze process data, identify trends, and recommend improvements.
• Collaboration: Work closely with engineering, production, and quality assurance teams to drive continuous improvement initiatives.
  
  Qualifications:
• Education: Bachelor’s degree in Electrical Engineering, Physics, or a related field. Advanced degrees are a plus.
  Experience: Previous experience in a semiconductor manufacturing environment or related field is preferred.
  
  Skills:
• Strong analytical and problem-solving skills.
• Proficiency in statistical analysis and data interpretation.
• Familiarity with process qualification, reliability engineering principles, and wafer-level reliability testing.
• Excellent communication and teamwork abilities.
• Knowledge of industry standards and best practices in manufacturi年

Responsibilities

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Requirements

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Candidate must have min 6 years of relevant working experience in design engineering of ACMV / HVAC, Fire Protection and Plumbing services with Engineering Consultancies in Singapore
• Proven track record of working across organization boundaries to define requirements, solve complex problems and drive programs to successful completion
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)
• BIM and CAD capabilities (REVIT / Microstation / Autocad) will be added advantage

We are seeking a skilled Civil Engineer to support the site project. The candidate will also supervise concreting operations and manage estimation of Bill of Quantities, project progress claims and earthwork supervision. Proficiency in AutoCad to review and make necessary adjustment to project

drawings.

Responsibilities:

• Install, configure, and maintain server operating systems (Windows/Linux/VMWare)
• Deploy, configure, manage, and troubleshoot the following software/hardware - Active Directory, Exchange Server & Exchange Online, VMware ESXi, SAN Storage & Backup
• Perform routine system administration duties
• Monitor servers and troubleshoot issues
• Provide additional support when necessary (eg. backup and storage functions)
• Perform proper documents for all processes
• Recommend solutions and ensure all IT issues have been corrected, and maintain records of work performed
• Provide technical support across the company, including Singapore, regional offices, and retail stores
• Provide technical support to server and network infrastructure and perform regular upgrades to ensure systems remain updated
• Troubleshoot system failures or bugs, and provide solutions to restore functionality
• Assist with any ad-hoc tasks as assigned

Requirements:

• Minimum Diploma in Computer Science, Information Technology, or a similar field
• At least 2-3 years of working experience in the related field
• Experience in configuring, monitoring, and troubleshooting systems
• Able to communicate effectively in both oral and written aspects
• Able to work independently and in a team
• Possesses analytical skills and works well in a fast-paced environment

Computer Engineering Technical Skills

- Knowledge of operating systems

- Understand computer network and hardware

- Debugging and troubleshooting

- Strong written and verbal communication skills

- Interested and passion in robotics

Jobe Description

- Development and test new features for robotic systems

- Participate in the whole development cycle including design,

development and deployment

- Application of software product onto real-world industrial

environment

- Product fiscovery and evaluation of emerging technologies for robotic

use cases

• PLC & HMI system design and develop applications that effectively accomplish objectives and needs
• Analyse and edit existing PLC applications to improve functionality
• Test & simulate PLC applications extensively to ensure they are error and bug free
• Liaise with customer/end-users to identify technical requirements and develop solutions
• Create and present application prototypes that align with requirements
• Problem solving and troubleshooting skill
• Identify and evaluate technology solution to fulfil system requirements
• Determine project constraints including estimated time and costs
• Perform maintenance, troubleshooting and calibration on machines & equipment.
• Other duties/activities as assigned by management

Job Description:

• Responsible for supporting yield improvement, driving, and managing the continuous yield and quality improvement for various devices.
• Responsible for having close interaction with Product Test Engineering team and communicate technical product status to management.
• Responsible for following up with Foundries and test subcontractors to resolve low yield/reliability issues.
• Responsible for monitoring of parameter test and wafer sorting yield with in-depth analysis using various statistical data analysis tools and understand on semiconductor process knowledge, e.g., inline d0, ET, CPK etc.
• Develops failure analysis methodologies as required for assigned projects to enable rapid problem solving with support of internal and external parties.

Requirements:

• Degree/Master’s in Electrical Engineering, Microelectronics or related discipline.
• Strong analytical problem-solving skills.
• Capability of mass data analysis.
• Min 2 years of experience in Product Engineering.
• Salary package will be offered based on working experience.

Job Description

• Attend to customer enquiry on Industrial Automation products
• Work with design team on conceptual design
• Prepare periodical sales report
• Project management support for the entire project cycle
• Work with marketing team to explore new business opportunities

Job Requirement

• Diploma/Degree in any Engineering discipline
• Positive work attitude, willing to put in extra effort during peak period
• Strong communications skills
• Exposed to Project Management, Industrial Automation and/or Robotic Systems
• Working knowledge of Auto CAD

We regret that only shortlisted candidates will be notified.

We need you to work along-side the Cloud Apps team, supporting our UI wielding petabytes of streaming data into visualizations and metrics of both real and simulated scenarios, aiding: management; debugging; and real-time monitoring of our Autonomous Vehicles (AVs).

You’ll be connecting the work of many disparate, international teams - ensuring their “day-to-day” goes by uninterrupted. You’ll be writing, and testing, in: React; TypeScript; and Vue.js in order to take stakeholder concepts from vague ideation, to the creation of great, responsive UIs with intuitive visualizations. This work will encompass every step of the journey of our AV fleets… from registration and software updates, to calibration, testing, and finally getting users into commercial rides.

What we want you to do

• Design, build, document, test, and maintain the AV fleets’ monitoring and data visualization platforms
• Monitor, support, and resolve issues as they arise in production
• Assist with high-level analysis, system design, and code reviews
• Communicate with stakeholders and team leads to identify system requirements

What we hope you’ll have

• 5+ years of working professionally delivering complex, high-performance web applications with modern JavaScript tooling
• A good eye for UI, UX, and responsive design
• Comfort taking projects from ideation through to completion, with strong communication and collaboration across multiple international teams
• 3D visualization tools (WebGL, Deck.gl/three.js, Mapbox)

Bonus points for experience with

• Working in a globally distributed team
• React, Vue.js, and TypeScript
• Data visualization (Plotly, D3); video manipulation; WebSockets
• Serverless APIs tools such as: AWS; Docker; Terraform
• Python and/or Golang

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy