Job Description

• Lead and manage the electrical engineering design works and projects works
• Prepare and review the design of the electrical works, e.g. equipment sizing, cable sizing and voltage drop calculation, power system study, electrical layout single line diagram, schematic drawings, etc.
• Handle equipment packages and procurement including technical specifications, technical clarification, technical bid analysis, etc.
• Develop cost estimates for electrical equipment and electrical works.
• Develop work schedule and coordination of the project works.
• Review the sub-consultants, sub-contractors and vendors' design and submission, ensuring all project specifications and design standard are met.
• Prepare all relevant checklists for installation, testing and commission works.
• Collaboration with multiple stakeholders including internal teams of different trades, clients, consultants, other packages, sub-contractors, and vendors.
• Attending to client's comments and ensuring client's approval and acceptance of all electrical works related design, installation, testing and commissioning works.
• Handle and resolve all site technical related matters in site

Requirements

• Bachelor Degree in Electrical Engineering
• Min 5 years of relevant experience in construction project.
• Experience in design, installation, testing and commissioning of electrical works, e.g. high voltage system, low voltage system, transformers, motor starters, cabling works, earthing and lightning protection system, etc.
• Experience in project execution, project coordination, supervision and coordination
  with clients, consultants, and all other sub-tier under the Contractor.
• Good technical knowledge in electrical system.
• Well verse in power system analysis software e.g. ETAP and BIM software e.g. Bentley, Revit and Navisworks.
• Team player with good interpersonal skills.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Highly motivated and able to work independently with minimal supervision.
• Will be required to work full time at project site.

• Job Description
• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.
• Requirements
• Degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.

Job Description:

· To make sure that PLC and SCADA system equipment are tested and commissioned in conformity with the

design drawings, testing procedures, safety measures and QA/QC system.

· To manage the PLC Testing & Commissioning activities (Integration, Validation, SAT, and ITC)

· Software design, configuration, programming, testing installation, commissioning, optimization, and

maintenance of multiple PLC and STEP7 SIMATIC MANAGAER and Siemens PCS7 process control systems or

Siemens DCS systems.

· Developing of Process Logic in Ladder, Statement List and Functional Block Diagram, Continuous Function Chart

(CFC), Structured Control Language (SCL), SIEMENS- various SERIES using STEP7 SIMATIC MANAGER. Conversant

with IEC 61131-3 (international standard for programmable controller programming languages).

· Knowledge working in Allen Bradley PLC1756-L56, using AB RS Logix 5000 for programming, using Kepware

OPC server (KEP Server EX).

· Knowledge in Profibus DP, Ethernet, Modbus RS485 and TCP /IP, IEC61850.

· To carry out Point-to-point test with substation electrical equipment.

· To carry out Point-to-point test with SCADA interface.

· To ensure the testing are in conformance with testing procedures.

· To management and update of the modification’s details for future as-built file.

· To prepare testing procedures & test forms.

· To record the test results in the test forms and prepare for report submission.

· Transmission of data to the QC Engineer whenever the issuances of a Corrective Action Requests.

· To attend the testing meetings relevant to his sites and participates during site visits.

· To co-ordinate activities with the Client and the external interface parties (Subsystem Work Contractors)

· Manage his team staff, preparing work schedules and assigning specific duties.

· To plan the activities and to follow-up the proper progress against deadlines and manpower.

· To co-ordinate with client and consultant, on Site acceptance test and ensure that established procedures are

complied.

Job Requirements:

· Bachelor’s degree in business, Electrical Engineering, or a related field.

· Experience in business development or sales within the power supply, railway and other electrification sector is

highly preferred

· Excellent negotiation, communication, and interpersonal skills.

· Ability to build strong relationships with clients and industry stakeholders.

· Results-oriented with a proactive approach to problem-solving.

· Proficiency in Microsoft Office Suite and CRM systems.

· Knowledge of the railway electrification industry and relevant regulatory standards.

Responsibilities and Duties

· Develop a deep understanding of design specifications based on customer requirements, , organizational goals, and business strategies. Conceptualize and develop solutions based on project requirements and Company standards through the use of simulations/modelling to support design concept used.

· Develop design specification sheet with relevant info related to the project and update as and when required and distribute to relevant parties.

· Carry out detailed cycle time study for individual modules to select the appropriate machine or module design. Develop 3D model of the machine and/or modules assigned with optimised design for manufacturing, cost, quality and safety.

· Initiate and carry out internal design reviews to share and explain the completed modules with other departments.

· Initiate and carry out design review with customer base on project schedule

· Revise design and documents based on both internal and external review

· Create and update flow chart for the module or the entire machine

· Create part drawings and assembly drawings based on approved design and obtain approval from department manager

· Create Bill Of Materials (BOM) for the modules assigned based on design schedule given

· Create drawing release file and send out drawings for quotation

· Send out standard part list for quotation based on BOM

· Receive quotation and make price comparison spreadsheet

· Raise PR and get department manager approval and send to Purchase department for negotiation and ordering

· Promptly support any design issues discovered during fabrication and /or assembly stages

· Make necessary modifications needed, update design, drawings and get approval from department manager.

· Release revised drawings to supplier and internal assembly team

· Support machine assembly team as and when necessary, with set up and fine tuning of machines

· Carry out all the activities based on the project schedule given

· Meet quality standards while maintaining working knowledge of relevant technologies and best practices, and upholding company policies, internal, customer standards for machine building and safety.

· Develop, train, and educate junior engineers, guide technical direction, and act as a technical liaison between customers

SPECIAL NOTES:

The incumbent (s) of this position is expected to perform all other related duties as assigned

• Develop ATE test program, test hardware and bench evaluation board for analog, digital and power semiconductor devices.
• Research new test methodology for better test coverage and test time reduction.
• Work with multi-functional team to meet new product release schedule
• Proficiency in C++ Programming
• Degree in Electrical/Electronics Engineering
• Fresh graduates with good academic result are welcome to apply.

Responsibilities:

• Review, validate and monitor budgets, funds, expenditures, forecasts, and contingency drawdown for respective projects throughout the entire project lifecycle.
• Review cost estimates, develop and maintain forecasts, and cost control plans for assigned projects.
• Track and analyze project expenditures, identifying variances from budgets and recommending corrective actions.
• Conduct cost risk assessments and develop mitigation strategies to minimize budget deviations.
• Support to review and analyze material contracts and contractor subcontracts, ensuring alignment with project specifications and budget parameters.
• Manage and track change orders associated with material contracts and subcontracts, ensuring proper cost control carried out and approval processes is in accordance to Micron’s Construction Management of Change (CMOC)
• Support in reviewing estimate and justification for change according to Micron’s Change Management process.
• Collaborate with project teams across engineering, procurement, and construction disciplines to identify cost-saving opportunities.
• Analyze financial data to identify trends, discrepancies, and opportunities for cost savings, presenting findings to management and recommending actions.
• Monitor and verify project costs, including materials, labor, and equipment, ensuring accurate cost allocation based on Work Breakdown Structure (WBS) and financial reporting.
• Carry out regular updates to WBS dictionary and ensure standardization is effectively used throughout the project.
• Prepare comprehensive cost reports and presentations for project stakeholders. Maintain a strong understanding of cost control principles and best practices within the semiconductor industry.
• Utilize cost control software and tools to manage project financials effectively.
• Implement and oversee cost auditing processes to ensure compliance with company policies and financial regulations, identifying and resolving discrepancies.

Qualifications:

• Bachelor's degree in Engineering, Construction Management, Quantity Surveying, Finance, or a related field.
• 7 to 10 years of working experience in the Construction Industry
• Minimum 3+ years of experience in cost control, preferably within the semiconductor industry or a similar capital projects environment.
• Strong understanding of cost estimating, budgeting, and forecasting methodologies.
• Excellent analytical and problem-solving skills.
• Proficient in Microsoft Office Suite (Excel, Word, PowerPoint) and cost control software.
• Meticulous attention to detail and a strong work ethic.
• Excellent communication and interpersonal skills, with the ability to collaborate effectively with diverse teams.

Preferred Qualifications:

• Experience with Contingency Drawdown management and Quantitative Cost Risk Analysis (QCRA)
• Experience with Earned Value Management (EVM) principles.
• Knowledge of semiconductor manufacturing processes and equipment.

Job Responsibilities and Duties:

-Develop a deep understanding of design specifications based on customer requirements, , organizational goals, and business strategies. Conceptualize and develop solutions based on project requirements and Company standards through the use of simulations/modelling to support design concept used.

-Develop design specification sheet based on Mechanical design and update as and when required and distribute to relevant Develop system architecture based on mechanical design, flow chart and other control system requirement specified by customer taking in to consideration of optimised design for manufacturing, cost, quality and safety.

-Initiate and carry out internal design reviews to share and explain the completed modules with other departments.

-Initiate and carry out design review with customer based on project schedule

-Revise design and documents based on both internal and external review

-Create wiring diagram for various control panels and filed wiring and approval from department manager

-Create Bill Of Materials (BOM) for various panels and sub panels based on design schedule given

-Create drawing release file and send out drawings for panel and field wiring quotation

-Send out standard part list for quotation based on BOM

-Receive quotation and make price comparison spreadsheet

-Raise PR and get department manager approval and send to Purchase department for negotiation and ordering.

-Prepare offline PLC/PC program for various panels based on the design requirements.

-Make necessary modifications needed, update design, drawings and get approval from department manager.

-Release revised drawings to wiring and assembly team

-Support panel and filed wiring team as and when necessary

-Carry out PLC I/O configuration, Netother devise driver set up and carry out I/O check and wiring integrity check

-Set up and debug PLC/PC program

-Carry out all the activities based on the project schedule given

-Meet quality standards while maintaining working knowledge of relevant technologies and best practices, and upholding company policies, internal, customer standards for machine building and safety.

-Develop, train, and educate junior engineers, guide technical direction, and act asa technical liaison between customers

SPECIAL NOTES:

The incumbent (s) of this position is expected to perform all other related duties as assigned

Job Description

As a Senior / Principle Engineer in PDE (Package Development Engineering) at Micron, you will be responsible for the Advance Packaging success within your scope (MRDA) and guided by functional objectives, in terms of process, equipment and materials definition, development and/or optimization. You will be managing and optimizing your area's performance to meet or beat defined metrics. You will apply extensive knowledge to carry out tactics and collaborate with internal and external partners to build and implement packaging technology roadmaps aligned to corporate strategic objectives. You will provide advice to senior management related to tactical decision for the function. You will interact with executives, major customers and/or site managers to provide consultation, influence decisions and identify and resolve critical issues.

Identify, select, and evaluate new process, equipment and/or technology to support current and future requirements for MRDA area

• Define, development and establish new process, equipment design and/or capability requirements aligned to Process and Packaging Roadmap
• Develop and engage creative solution for new process, equipment capabilities and/or solution to identified constraints or future technology requirements
• Work with equipment suppliers to develop new capability
• Actively participate in Package Development Engineering activities
• Conduct equipment benchmarking to establish the equipment suppliers and platforms for current and future need
• Create decision matrix for equipment and material selection
• Generates and set-up ADC, set-up/improve recipes
• Set-up PMON, Sampling Plans, BKM, CIP Strategies & performance indicators

Installation and qualification of new equipment platform and handover to production group

• Plan/submit capital request to acquire new Equipment
• Create purchasing specification (Doc2) document
• Establish the new equipment qualification criteria and activities roadmap with respective functional team
• Establish project handover requirements and procedures upon machine qualification
• Prepare documentation for handing over with respective site owner
• Conduct data gathering for low volume production
• Conduct training for Site representatives/personnel
• Establish the feedback loop for Continuous Improvement after mass volume production

Define, improve and/or maintain a matrix of key equipment platform capability and constraints (TOR - Tool of Records) on current and new equipment platform

• Maintain and regularly update the TOR, with inputs from local or other assembly site
• Maintain general knowledge of process and material characteristics and translate to equipment design requirement
• Search continually for new equipment or suppliers with improved or new capability that is aligned to Process/Packaging need

Collaborate with production group on upgrades of existing production equipment through continuous improvement projects

• Maintain knowledge of design constraints and weakness of existing platform
• Participate in the continuous improvement projects involving equipment improvement and upgrades

Job Requirements/ Qualifications:

• Bachelor / masters in electrical engineering, Materials Science, Chemical Engineering, or related field. A PhD is a plus.
• 4 or more years of experience in Semiconductor Manufacturing with proven track record of technical leadership in semiconductor manufacturing, preferably in MRDA Process & Equipment Engineering. Experience in other Front-End areas, in PWF & HBM technology is of greater advantage.
• Be able to comfortably work across organizational boundaries and geographies.
• Ability to effectively collaborate with multi-functional organizations to understand needs and translate them into actionable plans, deliverables, and resource requirements.
• Demonstrated ability to drive and implement a wide range of global initiatives with global teams.
• Organized, meticulous, and strong focus on results.
• Demonstrated ability to inspire teamwork and to effectively lead others.
• Demonstrated track record in baseline performance improvement, business process creation, process simulation techniques, data interpretation skills and proficiency in statistical analysis/method.
• Excellent analytical skills and organizational competency
• With good oral and written English communication skill

Skills and responsibilities:

• Utilize commercial and in-house EDA tools (e.g. Synopsys, Cadence, Siemens) for the design and implementation of 100 ~ 400 million gate integrated circuits in 7nm/5nm/3nm/2nm process technologies.
• Proficient with a full Netlist/Gates to GDS flow, inclusive of all construction stages (e.g. RTL synthesis, placement, clock tree synthesis, detailed routing, physical verification, formal verification and timing analysis) for complex digital blocks of up to 12Mgates/3M instances with embedded macros. Ability to handle multiple block assignments in parallel is required.
• Proficiency in UNIX/Linux and scripting languages is advantageous.

Required Qualifications:

• Degree, Masters or PhD in Electrical/Electronics/Computer engineering.
• Minimum of 2 years or more experience in a relevant field.

We are looking for energetic and passionate design engineers to join our Central Engineering Group and be part of an elite team responsible for the development of foundation IP for AI products including memory compilers, logic cells and custom macros of all types on the bleeding edge of process technology. We have multiple positions at all experience levels.

Available Job Responsibilities

• Design and build memory or circuit blocks at the gate or transistor level
• Simulate and analyze the circuit design using transistor level simulators
• Extract the layout and perform post-layout simulations and verification
• Floorplan physical implementation and layout integration of design components
• Integrate characterization flow to extract timing and power information
• Develop scripts to automate characterization flow, simulations, and verification
• Specify and verify various behavioral and physical memory models
• Document the design specifications, behavioral description, and timing diagrams
• Help specify silicon test plan and correlate silicon to simulation data

Preferred Skills

• Good understanding of transistor level circuit behavior and device physics
• Good understanding of signal integrity analysis, EM/IR analysis, and reliability analysis
• Proficiency in running simulators, writing automation scripts, and are tools savvy
• Understanding of memory behavioral and physical models is a plus
• Expertise in memory circuit design is a plus
• Understanding of DFT schemes and chip level integration is a plus
• Good communication, interpersonal, and leadership skills
• Motivated, self-driven and good at multi-tasking
• Passion for solving complex problems and willingness to learn

Qualifications

• Requires a BS in Electrical or Computer Engineering
• Some years of relevant experience is preferable
• Fresh graduates are encouraged to apply

1. Plan, devise and implement production schedule for the spice processing and packing operation.

2. Plan, Devise and implement maintenance program for packing equipment,

3. Grade and Blend spices based on spice characteristics.

4.Set up spice packing machine for the specific operation.

5. Monitor spice quality during spice packing.

6. Monitor the ground spices for fineness, aroma and essential oil volatility using sensory perceptions.

7. Clean and maintain spices packing equipment.

8. Work shift operations.

9. Tabulate production hours, machine time, product utilized and product output.

10. Supervise routine maintenance of production systems.

11. Supervise trouble shooting of production systems.

12. Supervise the inventory of production material.

Roles & Responsibilities

· Study construction drawing

· Raise RFI

· Responsible for the preparation of design calculation, checking of shop drawings and submit for approval

· Prepare and issue production drawing to production team

· Liaising with other internal company functions on all matters related to design and shop drawings.

· Maintain all drawing files, update drawings as needed, and make correction to drawing as needed.

Requirement:

· At least 1-2 year(s) working experience in precast industry

· Proficiency in AutoCad, Microsoft office (Word, Excel, Outlook)

· Prefer with Civil Engineering background

Descriptions:

• Provide IT technical support on hardware and software issues
• Liaise with internal and external parties
• Install operating systems and applications
• Fulfil ad hoc responsibilities and duties when required

Requirements:

• Bachelor’s Degree in Computer Science or equivalent
• Skilled in installing and configurating IT hardware and software
• Skilled in troubleshooting IT hardware and software issues
• Minimum 1 year experience in IT desktop support work
• Responsible, organized, hardworking and team player

Job Title: Solar Project Engineer

Department: Engineering/Project Management

Reports to: Project Manager or Engineering Manager

Job Summary

The Solar Project Engineer will oversee the engineering, design, and technical aspects of solar projects from initiation to completion. This role requires close collaboration with project managers, design teams, and installation crews to ensure that each project is executed to the highest standards, safely, efficiently, and within budget. The Solar Project Engineer will also ensure compliance with all regulatory and industry standards, troubleshoot technical issues, and support continuous improvement in project execution.

Key Responsibilities

1. Project Design and Engineering

• Develop and review detailed designs for solar PV systems, including single-line diagrams, layouts, and schematics.
• Conduct feasibility studies and site assessments, including shading analysis, solar irradiance, and other site-specific conditions.
• Work with design software (e.g., AutoCAD, PVsyst, Helioscope, or similar) to model and optimize system performance.
• Select appropriate system components (e.g., inverters, solar panels, mounting structures) based on project requirements, budget, and site conditions.
• Collaborate with structural and electrical engineers to ensure system designs meet safety and regulatory standards.

2. Project Planning and Coordination

• Develop project timelines, resource plans, and engineering deliverables in collaboration with the project management team.
• Coordinate with procurement to source materials and ensure timely delivery of components.
• Prepare technical documents, including bill of materials, wiring diagrams, and specifications.
• Participate in pre-construction meetings to ensure alignment on project requirements and schedules.

3. Quality Control and Compliance

• Ensure all designs comply with relevant codes, standards, and regulatory requirements (e.g., NEC, IEC, local building codes).
• Conduct technical reviews and inspections of completed installations to ensure adherence to design specifications and quality standards.
• Implement quality control measures and perform periodic checks during installation.
• Review and approve submittals, test plans, and commissioning procedures.

4. Technical Support and Troubleshooting

• Provide technical support to the construction and installation teams, addressing issues as they arise on-site.
• Identify and resolve engineering issues that may affect project timelines, costs, or quality.
• Monitor system performance and work with O&M teams to troubleshoot and rectify issues post-installation.

5. Documentation and Reporting

• Maintain accurate records of engineering designs, specifications, and project changes.
• Prepare and present project status reports, highlighting technical progress, issues, and risks.
• Ensure that all documentation, including as-built drawings and commissioning reports, is completed accurately and submitted in a timely manner.

6. Health, Safety, and Environmental (HSE) Compliance

• Ensure all engineering practices comply with company HSE policies and local regulatory requirements.
• Participate in safety meetings, conduct risk assessments, and promote a safety-first culture on-site.
• Identify potential safety risks in the design phase and work with teams to mitigate these risks in implementation.

7. Stakeholder Communication

• Liaise with clients, contractors, and subcontractors to ensure alignment on project requirements and deliverables.
• Communicate technical updates, project progress, and any changes to key stakeholders.
• Attend site visits and client meetings to address technical queries and provide project updates.

Required Qualifications

Education and Experience

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or a related field.
• Minimum of 2-5 years of experience in solar project engineering, renewable energy, or a related industry.
• Proven experience with solar PV system design and project management.

Technical Skills

• Proficiency in design and simulation software (e.g., AutoCAD, PVsyst, Helioscope).
• Strong knowledge of electrical systems, solar PV technology, and power distribution.
• Familiarity with industry standards and codes (e.g., NEC, IEC).
• Understanding of site assessment tools and techniques, including shading and irradiance analysis.

Soft Skills

• Excellent problem-solving skills with a detail-oriented approach.
• Strong communication skills for effective collaboration with clients, team members, and stakeholders.
• Ability to work independently and manage multiple projects simultaneously.

Additional Requirements

• Willingness to travel to project sites as required.
• Valid driver’s license.
• Professional Engineer (PE) certification or PMP certification is a plus.
• Ability to work in outdoor conditions and at heights (if applicable).

Benefits

• [List any benefits your company offers, such as medical insurance, retirement plans, etc.]
• Opportunities for professional development and certification.
• Career growth in a rapidly expanding renewable energy sector.

The Job

1. Responsible for assembly, debug and test run of customized modular machines and it’s commissioning.
2. Provide on-site technical support at customer premise for equipment operation.
3. Perform design modifications through: Simplified design, reduced parts, using cheaper alternatives, while maintaining or enhancing the performance of products in terms of cost reduction.
4. Procure and/or assist in the procurement of necessary items to enable the performance of above duties.
5. Writing and maintenance of all necessary documentations, work and assembly instructions, manufacturing and test procedures.

The Requirements

1. Nitec / Higher Nitec / Diploma in Mechanical Engineering with 2 to 3 years’ relevant experience.
2. Knowledge of industrial automation, jigs and fixture design, FMEA, SPC, CAD as well as experience in machine design are added advantages
3. Self-Disciplined with strong project management skills
4. Can work independently
5. Good interpersonal and communication skills
6. Required to travel when necessary

Responsibilities:

• Identify and create sales opportunity to penetrate new accounts for parts sales and main existing products
• Service corporate accounts and manage full sales cycles
• Follow up with customer enquiries
• Build strong and sustainable relationships with customer
• Any other ad hoc duties assigned

Requirements:

• Diploma in Engineering (any)
• Fresh grads are welcome
• Prefer at least 1 year working experience
• Technically incline with Sales Experience in Semiconductor Industry are preferred
• Bilingual with good communication skills (verbal & written)
• Good presentation skills
• Willingness to travel overseas

Benefits

• 5 days work
• Transport claim
• Handphone claim
• Medical insurance
• Annual, Medical, Childcare/Family care leave

Objectives of this role

Supervising and managing construction projects from start to finish, ensuring adherence to project plans and specifications.

Reporting project updates, milestones and potential risks to the project manager and key stakeholders.

Analysing and interpreting engineering drawings, survey reports and other technical documentation to guide the construction process.

Planning and overseeing allocating resources, materials and equipment to optimise project efficiency.

Monitoring project costs, identifying cost-saving opportunities and adhering to budget constraints.

Providing technical guidance and expertise to resolve construction-related challenges.

Your tasks

Oversee and manage construction activities at the site, ensuring adherence to project specifications, codes and safety regulations.

Conduct regular site inspections to monitor progress, identify potential issues and ensure compliance with engineering and design requirements.

Collaborate closely with project managers, architects and subcontractors to ensure timely project completion.

Analyse and interpret engineering plans, aerial photography, blueprints, topographical & geologic data and technical drawings to plan and execute construction activities.

Coordinate the procurement and delivery of construction materials, ensuring their compliance with industry standards.

Identifying potential risks and implementing preventive measures to minimise project delays, cost overruns and safety hazards.

Maintain accurate project documentation, including progress reports, site diaries, change orders and quality control measures.

Required skills and qualifications

4-5 years of experience as a site engineer, civil engineer or an equivalent role.

Demonstrated proficiency in managing and supervising construction projects.

Experience with Microsoft Office Suite, GIS, AutoCAD and other software.

Ability to manage multiple construction projects at various stages of their lifecycle.

Strong knowledge of construction methods, materials and regulations.

Competent in assessing, interpreting and presenting survey reports and other critical data for stakeholders and shareholders.

Excellent project management and organisational skills.

Strong problem-solving and decision-making abilities with effective communication.

Ability to work effectively in a team and coordinate with multiple stakeholders.

Attention to detail and a focus on delivering high-quality results.

Preferred skills and qualifications

Relevant engineering certifications, like Project Management Professional (PMP) or Construction Health and Safety Technician (CHST).

Thorough knowledge of the Singapore Building Code, safety regulations and standards.

Excellent interpersonal, leadership and management skills.

Knowledge of sustainable construction practices.

Understanding of budgeting and cost control.

1) Purchase tender documents, understand tender requirement, calculate material requirement, submit tender

2) Progress claim for each project

3) Liase with vendor /Client for quotation, PO & invoice issue

4) Monitor project progress & update peers & management

5) Arrange meeting as and when is needed, reporting & filling

6) Ad-hoc task assigned

• To advice operational/site personnel on all engineering designs.
• To propose corrective actions for non-conformances related to engineering design.
• To assist in the investigation of complaints related to engineering design.
• To assist the Operation Manager in terms of administrative concern.
• To prepare technical submissions, including submission to authority, before work commencement.
• To attend technical meetings
• To check and ensure that the latest construction drawings are being issued to the site

Qualification

• Minimum Degree holder in Civil Engineering

Experience

• 1 year relevant experience preferred

Skills

• Engineering competence/knowledge

Training

• In house and/or on the job training

Skills and responsibilities:

• Utilize commercial and in-house EDA tools (e.g. Synopsys, Cadence, Siemens) for the design and implementation of 100 ~ 400 million gate integrated circuits in 7nm/5nm/3nm/2nm process technologies.
• Proficient with a full Netlist/Gates to GDS flow, inclusive of all construction stages (e.g. RTL synthesis, placement, clock tree synthesis, detailed routing, physical verification, formal verification and timing analysis) for complex digital blocks of up to 12Mgates/3M instances with embedded macros. Ability to handle multiple block assignments in parallel is required.
• Proficiency in UNIX/Linux and scripting languages is advantageous.

Required Qualifications:

• Degree, Masters or PhD in Electrical/Electronics/Computer engineering.
• Minimum of 5 years or more experience in a relevant field.

We are looking for energetic and passionate design engineers to join our Central Engineering Group and be part of an elite team responsible for the development of foundation IP for AI products including memory compilers, logic cells and custom macros of all types on the bleeding edge of process technology. We have multiple positions at all experience levels.

Available Job Responsibilities

• Design and build memory or circuit blocks at the gate or transistor level
• Simulate and analyze the circuit design using transistor level simulators
• Extract the layout and perform post-layout simulations and verification
• Floorplan physical implementation and layout integration of design components
• Integrate characterization flow to extract timing and power information
• Develop scripts to automate characterization flow, simulations, and verification
• Specify and verify various behavioral and physical memory models
• Document the design specifications, behavioral description, and timing diagrams
• Help specify silicon test plan and correlate silicon to simulation data

Preferred Skills

• Good understanding of transistor level circuit behavior and device physics
• Good understanding of signal integrity analysis, EM/IR analysis, and reliability analysis
• Proficiency in running simulators, writing automation scripts, and are tools savvy
• Understanding of memory behavioral and physical models is a plus
• Expertise in memory circuit design is a plus
• Understanding of DFT schemes and chip level integration is a plus
• Good communication, interpersonal, and leadership skills
• Motivated, self-driven and good at multi-tasking
• Passion for solving complex problems and willingness to learn

Qualifications

Requires a BS in Electrical or Computer Engineering and > 5 years of related experience

Position Responsibilities

• Provide quality assurance support and review areas of manufacturing operations, product development, or field/ product quality.
• Ensure that facilities, equipment, materials, processes and product readiness comply with cGMP practices.
• Serve as Quality representative on project teams for reviewing the new product design transfers and/ or line transfers.
• Review and align manufacturing operational activities, such as Work instructions, Device History Records, Nonconformances, CAPA, RMA, and customer complaint investigations.
• Identify and drive resolution of quality issues in Quality Management System and/ or manufacturing operations.
• Work with cross-functional teams to resolve operational quality issues.
• Trend, analyze and monitor key performance indicators, suggest improvements and escalate to supervisor/ management as necessary.
• Participate in customer complaints and work closely with cross-functional teams to investigation issue and ensure timely response to corporate/ customer.
• Work in accordance with procedures and integrated program plans to achieve and maintain the required level of product quality in preparation for FDA and ISO third party audits.
• Support product risk management activities and ensure quality and completeness of project design history files, validation packages, and change orders
• Review verification and engineering study reports and identify gaps for GMP compliance. Develop and execute strategies to close gaps in an efficient, technical, and compliant manner
• Coordinate issue resolution using a risk-based approach

Listed responsibilities are an essential, but not exhaustive list, of the usual duties associated with the position. Changes to individual responsibilities may occur due to business needs.

Position Requirements

• Minimum of 1-2 years of related experience in manufacturing, quality assurance, and/ or process validation in a regulated environment. Fresh graduates can be considered.
• Bachelor's Degree in Biology, Biochemistry, Chemistry or equivalent field is preferred.
• Experience in the medical devices / IVD / biotech / pharmaceutical industry, or instrument hardware / software integration is an advantage.
• Good interpersonal, verbal and written communication skills.
• Familiar with 21 CFR 820 and ISO 13485 requirements.
• Familiar with words processing, spreadsheets and presentation tools.
• Familiar with failure investigation, technical report writing, data mining, trend analysis and statistical analysis.
• Adaptable to fast-paced, dynamic work environment with shifting demands
• Ability to operate with high level of independence to investigate and resolve compliance issues, lead projects, plan and implement improvements, and achieve goals.

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional task and responsibilities.

As a NAND CMOS Process Integration Engineer in the Singapore Technology Development department at Micron Technology Inc., you will be responsible for developing 3D NAND CMOS devices scaling and enhancing their performance, reliability and manufacturability.

Responsibilities:

• Develop and innovate critical CMOS Front end/interconnect module. Drive multi-functional teams to optimize existing process flows and develop new innovative solutions to meet product requirements and manufacturability.
• Develop/re-define critical specifications criteria for optimum product performance and drive activities to get them to manufacturing process capability.
• Extract and analyze inline, probe, parametric, reliability, and other critical metrics and predict future behavior of the CMOS device performance of the product to enable early innovative solutions to meet product and device specifications.
• Early introduction, characterization and validation of new CMOS device models and test structures for developing future NAND products.
• 3 dimensions analysis with the use of K2 view to extract layout information and combine with the doping profiles of each implant step for product development and integration solutions.
• Interact and collaborate with TCAD, modeling, and layout teams to drive clearer definition of CMOS device and reliability improvements across multiple tech-nodes and designs.
• Coordinate activities at manufacturing site towards gating experiment funding, conversions, and effectively communicate decisions made to all R&D, manufacturing, and relevant partners.
• Take on leadership role at quarterly yield summits and monthly program reviews in summarizing complex problems, deriving and explaining actions taken to address them and getting R&D, manufacturing, and senior management teams on the same page.
• Assist in the transfer of a new technology from R&D to manufacturing and contribute towards ensuring successful ramp and qualification. Supporting the transfer, documentation and training of module fundamentals into manufacturing.

Requirements:

• MS or PhD in Electrical Engineering preferably specialized in Microelectronics and Semiconductor Device Physics. Prior technology development and tech transfer/manufacturing experiences are preferred.
• Fresh MS/PhD candidates with knowledge of semiconductor process Integration and CMOS engineering.
• Direct fab experience with nonvolatile memories manufacturing, knowledge of TCAD, K2 view layout, and NAND product are highly desirable.
• Ability to develop a strong, holistic, end-to-end understanding of CMOS device and its related module on NAND technologies, related structural and electrical fail mechanisms.
• Deep understanding of probe failure mechanism, ability to do electrical bench data collection.
• Self-motivated, self-governing with proven ability to work in a demanding and dynamic environment.
• Experienced in coordinating cross-functional teams to achieve a goal.
• Solid data analysis, communication and reporting abilities with demonstrated presentation abilities.
• Curiosity and natural tendency of learning new things independently.
• Ability to travel for extended periods of time to the US for collaborative R&D work.

Roles & Responsibilities

· Study construction drawing

· Raise RFI

· Responsible for the preparation of design calculation, checking of shop drawings and submit for approval

· Prepare and issue production drawing to production team

· Liaising with other internal company functions on all matters related to design and shop drawings.

· Maintain all drawing files, update drawings as needed, and make correction to drawing as needed.

Requirement:

· At least 2 year(s) working experience in precast industry

· Proficiency in AutoCad, Microsoft office (Word, Excel, Outlook)

· Prefer with Civil Engineering/ Precast background

Job duty:

· Coordinate with contractor and customer to plan, organize and scheduling job activities for the assigned project.

· Monitor and control project based on plan schedule

· Represent company for project meeting and discussion with all project stakeholders

· Manage of project according to contract specification and maintain good relationship with customer

· Manage material requisition

· Record scope change and follow up on variation submission and approval

· devising control panels based on site surveys and existing documentation

· creating operations and maintenance documents including equipment schedules, points schedules, site reports and descriptions of operations

· writing bespoke software for each individual BMS project

· designing software graphics for user interfaces

· performing electrical installation checks and completing necessary alterations when issues arise

· completing mechanical installation checks for correct installation and repair if necessary

· surveying sites to provide current documentation of the site, maintenance quotes or energy savings advice

· performing commissioning checks, including both pre-commissioning and post-commissioning, to ensure everything is working as intended

· writing reports for stakeholders and senior management about the work completed, the state of the project as a whole and any other remaining work

· providing maintenance and service work to pre-existing BMS systems to ensure that all controllers and devices continue to operate smoothly

Requirements:

• Candidate must able to write & speak in English; if can speak & write Japanese is addon advantage.
• Working country: Singapore / Japan Tokyo
• Candidate must possess at least Diploma/Bachelor's Degree/Post Graduate Diploma/Professional Degree in Mechanical/electrical Engineer
• Preferably Engineer specialized in Engineering - Electrical/Mechanical or equivalent
• At least 3 Year of working experience in the related field is required for this position
• Energetic, leadership, self-motivated, good problem-solving skills, positive attitude, good written and communication skills.
• Self-initiative and positive thinker
• Committed on job assign