Summary

The Infrastructure and Tools (Cisco AppDynamics) Operations Engineer focuses on the ongoing maintenance, support, and optimization of Cisco Application Performance Monitoring (APM) solutions after their initial deployment (Day 1). This role requires a deep understanding of Cisco APM tools (AppDynamics) networking, application architectures, and ITIL practices. The engineer ensures the continued health, performance, and stability of the AppDynamics environment and its ability to provide valuable insights into application performance.

Job Scope

Implementation and Configuration:

• Support the implementation of Cisco APM solutions (AppDynamics) for customers

• Collaborate with clients to understand their application environments, business goals, and performance monitorin needs.

• Install, configure, and fine-tune Cisco APM agents and collectors to monitor applications and infrastructure components.

• Integrate Cisco APM with existing monitoring and management tools.

• Define and configure application performance baselines and thresholds.

• Develop custom dashboards and reports to visualize application performance data.

Performance Monitoring and Analysis:

• Proactively monitor application performance metrics (response times, transaction volumes, error rates, resource consumption).

• Analyse performance data collected by AppDynamics to identify bottlenecks, perform root cause analysis on outages, and pre-emptively alert for potential problems.

• Utilize Cisco APM tools to trace transactions, diagnose performance problems, and identify root causes.

• Collaborate with application development teams to optimize application code and infrastructure configurations.

Troubleshooting and Optimization:

• Troubleshoot application performance issues using Cisco APM tools and diagnostic techniques.

• Work with network, infrastructure, and application teams to resolve performance bottlenecks.

• Optimize application performance by tuning application parameters, infrastructure configurations, and network settings.

• Implement performance improvements and validate their effectiveness.

Maintenance and Support

• Develop custom queries and metrics to enhance visibility into key problem areas in customer environments.

• Perform regular maintenance and upgrades of Cisco APM solutions.

• Ensure the availability and reliability of the APM infrastructure.

• Provide technical support to users of the APM tools.

• Stay up to date on the latest Cisco APM features, best practices, and releases.

Documentation and Knowledge Sharing:

• Develop and maintain comprehensive documentation for the APM environment.

• Create knowledge base articles and training materials for users.

• Share knowledge and expertise with other team members.

Responsibilities:

• Support implementation and maintain Cisco APM solutions to monitor critical applications and infrastructure.

• Configure and customize Cisco APM agents, collectors, and dashboards.

• Define application performance baselines, thresholds, and alerting rules.

• Proactively monitor application performance and identify potential issues.

• Analyse performance data and troubleshoot performance problems.

• Collaborate with application and infrastructure teams to resolve performance issues.

• Optimize application performance by tuning application and infrastructure configurations.

• Perform regular maintenance and upgrades of Cisco APM solutions.

• Ensure the availability and reliability of the APM infrastructure.

• Provide technical support to users of the APM tools.

• Create and maintain documentation for the APM environment.

• Stay current on the latest Cisco APM features and best practices.

Requirements

• Bachelor's degree in computer science, network engineering, or a related field.

• 2 or more years of relevant experience with maintaining AppDynamics in a production environment.

• Possesses ACIP (AppDynamics Certified Implementation Professional) certification or can attain within 3 months.

• Has working experience with programming languages (e.g., Java, .NET, JavaScript)

• Strong understanding of large-scale application deployment architecture and challenges in both on-premises and cloud environments

• Working experience with other observability industry platforms (Datadog, Dynatrace, etc.) and cloud experience is a good to have.

• Strong analytical and problem-solving skills.

• Excellent communication and interpersonal skills.

• Ability to work independently and as part of a team.

• Well Established Company
• Basic $2800 - $3300 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Gul Circle
• Working hours: Normal Working Hours
• Training provided for those without/lesser experience

Job Responsibilities:

• Hands-on in execution and implementation including configuration and testing for PLC based systems
• Assisting Senior Engineer
• Identification of potential issues
• Liaise with team members, clients or others for problem resolution
• Other ad-hoc duties as assigned from time to time

Job Requirements:

• Minimum Nitec/Diploma in Engineering, preferably Electrical, Electronics or Automation
• Candidate without or with lesser experience are welcome as Training will be provided

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Degree in Computer Science Engineering or a relevant discipline.
• Developed software in at least one full Software Development Lifecycle.
• Experience in writing Requirements Specification, Use Cases, Design Documentation, and designing software using object-oriented software design and UML modelling
• Good knowledge and experience in C++ on Embedded platforms (e.g. QNX, Vxworks, Embedded Linux).
• At least 4 years’ experience in object-oriented software development.
• Strong analytical and problem-solving skills.
• Good written and verbal communication skills.
• Self-motivated, independent and a good team player.

Responsibilities

• Coordinate with internal team in Singapore liaise with customers / consultants on day to day basis
• Preparation of project documents including BQ
• Handling Design & Build projects
• Prepare optimised design solutions for projects
• Prepare Design drawings (Single Line Drawings & layout)
• Prepare design calculations incl voltage drop, short circuit current etc.
• Support multiple M&E projects concurrently
• Lead project meetings and work with team members to achieve the deliverables on-time
• Ensure drawings & documents are well maintained & stored in a timely manner
• Other adhoc duties as assigned

Requirement

• Diploma/Degree in Electrical Engineering
• Minimum 2 yrs of relevant hands-on M&E experience in construction industry, LTA projects, mixed development etc
• Need to be familiar with Singapore codes such as SS638 (CP5), SS650, SS555 etc
• Hands-on experience in AutoCAD drawings is preferred
• Familiarity in BIM (Revit / Navisworks) is advantageous
• Having consultancy experience is preferred
• Possess effective organizational and follow-up skills, meticulous
• Good communication skills
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

*We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

EA License No.: 22C1153

Ref: PTEPL

Key Responsibilities:

• Design, develop, and execute automated test scripts using Tosca.

• Ensure automation coverage for regression, smoke, and integration testing.

• Perform end-to-end (E2E) testing to validate workflows and integrations.

• Conduct database testing to verify data accuracy, consistency, and integrity.

• Execute User Acceptance Testing (UAT) in collaboration with business stakeholders.

• Document and track test cases, test results, and defects using HP QC/ALM and Microsoft Azure DevOps.

• Ensure timely reporting and resolution of defects.

• Maintain and update regression test suites to reflect new functionality and defect fixes.

• Validate critical system functionalities during release cycles.

• Collaborate with development teams to test interfaces between components and systems.

• Validate APIs, microservices, and data flows across platforms.

• Leverage Azure DevOps for continuous integration/continuous deployment (CI/CD) pipelines.

• Integrate test automation into the DevOps pipeline to support continuous testing.

Required Skills and Qualifications:

• Hands-on experience with Tosca for test automation.

• Minimum of 3 years of experience in Software Testing.

• Bachelor of engineering or similar relevant industry experience.

• Strong knowledge of E2E, regression, smoke, integration, database, and UAT testing methodologies.

• Proficiency in using HP QC/ALM and Microsoft Azure DevOps for test case management and defect tracking.

• Experience with SQL and other database technologies to validate backend data.

• Familiarity with Azure DevOps pipelines and continuous testing practice

• Experience with Agile and DevOps methodologies.

• Knowledge of API testing tools (e.g., Postman, SoapUI) and performance testing tools.

• ISTQB or other relevant certification in software testing

Disclaimer: The company is committed to ensuring the privacy and security of your information. By submitting this form, you consent to the collection, processing, and retention of the information you provide. The data collected (which may include your contact details, educational background, work experience and skills) will be used solely for the purpose of evaluating your qualifications for the position you're applying for. Your data will be stored securely and retained for the duration necessary to fulfill our hiring process. If you are not selected for the position, your data will be kept on file for a limited period in case future opportunities arise. You have the right to access, correct, or delete your data at any time by contacting us at Quess Singapore | A Leading Staffing Services Provider in Singapore (quesscorp.sg)

• Develop and promote overall corporate and Data Centre sustainability goals as direction for all initiatives, including promoting decision- making based on financial and sustainability goals.
• Develop and run systems to make reporting and information sharing more efficient, accurate and impactful. Work with stakeholders to develop and achieve their key performance indicators
• Manage the development of sustainability communications internally and externally. Create continual educational resources on sustainability issues
• Institutionalize sustainability through documentation and quarterly review of policies e
• Manage and track corporate sustainability goals and metrics, analyze data and produce regular reports. Run regular audits as information-gathering exercises for content generation
• Keep abreast with trends and industry leading best practices in sustainability

Requirements

• Diploma / Degree in Electrical / Mechanical Engineering with background in Sustainability
• Preferably 1 - 3 years' of working experience in related fields
• Good verbal and written communication skills
• Good interpersonal skills, meticulousness, and a strong desire to learn.
• Knowledgeable and continually curious about current best practices in corporate responsibility, environmental efficiency, sustainability reporting
• Knowledgeable of Local and International standards such as BCA Green Mark for Data Centre and Buildings, SS564 Green Data Centre, ISO 14001 Environment Management System, etc
• Strong analytical and project management skills to track progress and reporting
• Motivated self-starter, resourceful, and independent

Job Description:

• Drive strategic initiatives that maximize the team's positive impact on the public good, including taking an active role in team delivery of product and engineering goals.
• Delivering high-quality, maintainable, and reusable software systems
• Champion engineering best practices and establish tools to optimize team effectiveness and impact, including providing technical contributions and leadership to software engineers, coaching and mentoring them toward fostering a culture of technical excellence
• Influencing team direction towards achievement of high-priority initiatives (to maximize our impact on the public good)
• Establishing practices and tools to encourage a strong engineering culture and maximize engineering effectiveness and impact.
• Independently managing external (to the team) dependencies related to your work items.
• Working with other leaders to create a long-term technical plan and roadmap for the assigned squads, and for other squads as needed. Updating the roadmap regularly to meet future product/business needs and infrastructure requirements.
• Helping with recruitment, particularly for senior hires.

Job Requirements:

• Experience working on reasonably large, high-availability software systems that have operated at scale.
• Experience in modern full-stack web application technologies; experience in modern front-end engineering on Next.Js/React.js and Java/TypeScript on the backend is preferred.
• Have a strong sense of what it means to be a technical leader, particularly as it relates to the suite of soft skills beyond just your technical chops.
• Passion towards engineering excellence; you deeply understand that software engineering is a team sport, and you take pride in the craftsmanship aspect of software engineering.
• Passion towards working for public good with interest.
• Interest and experience in coaching and growing junior engineers.

Job Description:

• Drive strategic initiatives that maximize the team's positive impact on the public good, including taking an active role in team delivery of product and engineering goals.
• Delivering high-quality, maintainable, and reusable software systems
• Champion engineering best practices and establish tools to optimize team effectiveness and impact, including providing technical contributions and leadership to software engineers, coaching and mentoring them toward fostering a culture of technical excellence
• Influencing team direction towards achievement of high-priority initiatives (to maximize our impact on the public good)
• Establishing practices and tools to encourage a strong engineering culture and maximize engineering effectiveness and impact.
• Independently managing external (to the team) dependencies related to your work items.
• Working with other leaders to create a long-term technical plan and roadmap for the assigned squads, and for other squads as needed. Updating the roadmap regularly to meet future product/business needs and infrastructure requirements.
• Helping with recruitment, particularly for senior hires.

Job Requirements:

• Experience working on reasonably large, high-availability software systems that have operated at scale.
• Experience in modern full-stack web application technologies; experience in modern front-end engineering on Next.Js/React.js and Java/TypeScript on the backend is preferred.
• Have a strong sense of what it means to be a technical leader, particularly as it relates to the suite of soft skills beyond just your technical chops.
• Passion towards engineering excellence; you deeply understand that software engineering is a team sport, and you take pride in the craftsmanship aspect of software engineering.
• Passion towards working for public good with interest.
• Interest and experience in coaching and growing junior engineers.

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyze and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Bachelor’s degree in computer science, Software Engineering, or a related field (Advanced degrees are a plus).
• Minimum of 5 years of professional experience in Software Quality Assurance.
• Proven experience with automation testing, particularly using Cypress for E2E testing.
• Hands-on experience with performance testing tools like Gatling and Autocannon.
• Experience with contract testing frameworks such as Pact.js.
• Proficiency in JavaScript (TypeScript) and familiarity with Go.
• Solid understanding of frontend and backend technologies, including ReactJS, ExpressJS, and Gin-gonic.
• Experience with AWS services, Docker, and Kubernetes.
• Familiarity with CI/CD pipelines using GitLab and ArgoCD.
• Knowledge of relational databases (MySQL, PostgreSQL) and caching solutions (Redis)
• Understanding of REST API, GraphQL API, JWT authentication, and Elasticsearch.
• Experience with logging and monitoring tools like Splunk or OpenSearch.

Job Title: NLP Research Scientist

Job Responsibilities:

Responsible for leading and driving innovative research and development in the field of NLP technology to address the fundamental challenges and core issues in language models, knowledge representation, machine translation, dialogue systems, and text generation. Achieve high impact through the publication of influential papers and the creation of valuable patents. Proactively explore and identify new applications for these cutting-edge technologies.

Job Qualification

● Possess a strong foundation in deep learning, machine learning, and natural language processing, including a thorough understanding of common models. Capable of selecting appropriate models and devising effective technical solutions for problem-solving purposes.

● Demonstrated outstanding publication records in top-tier international conferences and journals like ICLR, ACL, NeurIPS, EMNLP, TACL, etc. Preference given to individuals with experience in LLMs.

● Proficient in popular deep learning frameworks like PyTorch, with comprehensive knowledge of key deep learning models such as Transformer, BERT, GPT, RNN, LSTM, and their implementations.

● Exceptional organizational and communication skills, self-motivated and capable of handling pressure. Possess a strong enthusiasm for acquiring knowledge and a genuine passion for technology.

Job Description:

• Drive strategic initiatives that maximize the team's positive impact on the public good, including taking an active role in team delivery of product and engineering goals.
• Delivering high-quality, maintainable, and reusable software systems
• Champion engineering best practices and establish tools to optimize team effectiveness and impact, including providing technical contributions and leadership to software engineers, coaching and mentoring them toward fostering a culture of technical excellence
• Influencing team direction towards achievement of high-priority initiatives (to maximize our impact on the public good)
• Establishing practices and tools to encourage a strong engineering culture and maximize engineering effectiveness and impact.
• Independently managing external (to the team) dependencies related to your work items.
• Working with other leaders to create a long-term technical plan and roadmap for the assigned squads, and for other squads as needed. Updating the roadmap regularly to meet future product/business needs and infrastructure requirements.
• Helping with recruitment, particularly for senior hires.

Job Requirements:

• Experience working on reasonably large, high-availability software systems that have operated at scale.
• Experience in modern full-stack web application technologies; experience in modern front-end engineering on Next.Js/React.js and Java/TypeScript on the backend is preferred.
• Have a strong sense of what it means to be a technical leader, particularly as it relates to the suite of soft skills beyond just your technical chops.
• Passion towards engineering excellence; you deeply understand that software engineering is a team sport, and you take pride in the craftsmanship aspect of software engineering.
• Passion towards working for public good with interest.
• Interest and experience in coaching and growing junior engineers.

Key Responsibilities:

1. Design & Implementation:

• Integrate Azure Sentinel with on-premises and cloud-based resources for comprehensive threat visibility.

• Develop and manage Log Analytics Workspaces and data connectors.

2. Security Monitoring & Threat Detection:

• Create and maintain custom rules, alerts, and automation playbooks.

• Analyze security events, identify threats, and provide actionable recommendations.

• Monitor and manage SIEM dashboards for real-time threat intelligence.

3. Incident Response & Management:

• Respond to security incidents and conduct root cause analysis.

• Coordinate with stakeholders to mitigate risks and resolve vulnerabilities.

4. Optimization & Automation:

• Enhance Sentinel performance by optimizing data ingestion and query performance.

5. Documentation & Reporting:

• Develop and maintain documentation for configurations, processes, and incident responses.

• Generate detailed reports on security incidents, trends, and recommendations.

Qualifications & Skills:

• Bachelor’s degree in Computer Science, Information Technology, Cybersecurity, or related field.

• Proven experience with Azure Sentinel, Microsoft Defender, and Azure Security tools.

• Strong understanding of SIEM platforms and security operations.

• Knowledge of KQL (Kusto Query Language) for writing log queries and analytics rules.

• Familiarity with threat detection frameworks like MITRE ATT&CK.

• Experience with incident response, threat hunting, and SOC operations.

Being client representative for all Process-related activities and installations

Supporting the E.O in getting the necessary information at the battery limits of the package

Ensuring alignment between equipment suppliers and client Specification and Guidance

Reviewing design and technical documentation

Following-up construction & all testing activities falling under the package' scope

Ensure systems start-up and punch list solving

Provide projects support in terms of technical expertise, contractors' management and troubleshooting capabilities.

Facilitating handover process towards the end user

Review documents for ITT process & contractors' selection

Detailed design studies review with contractors, including follow up of yellow reviews, functional specifications, piping and vessel design, 3D-model

Works supervision, Walkdowns performed, FAT, SAT, IQ, OQ + punch list follow-up

Provisional and final acceptances

Final handover for process packages and systems.

Experience in the Bio-Pharmaceutical industry

Perform his/her work in an EHS and cGMP high-demanding environment.

Chemical or Process engineering degree is required.

10 years of experience in the field of Bio or Vaccine Process engineering is required, ranging from early design to facility start-up.

Deep knowledge of commissioning and qualification of similar production trains is a must.

Experience with Centrifugation and Ultrafiltration systems is a must.

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

Responsiiblitiies:

• Responsible for the Software Test design and execution for the applications under test.
• Work closely work with the QA Manager, Business/Functional Analyst and Project Manager through the Project Life Cycle.
• Able to perform defect reporting and verification of the fixes.
• Effective Communication with strong interpersonal skills and good analytical, problem solving skills.
• Conduct Test Readiness Review (TRR) to ensure readiness of the test phase.
• Experience in API testing using postman.
• Knowledge of SQL and scripting.
• Hands-on experience and expertise with test management tool.
• Development /scripting skills in programming languages which are compatible for Selenium WebDriver such as Java/C#/Python.

Requirement:

• Bachelors degree in comuter science or equivalent
• Possess 3 to 5 years of experience in Funcational / Automation testing
• Experience in Software Development Life Cycle Process (SDLC) , Software Testing Lifecycle (STLC) ,Test Methodologies and defect life cycle.
• Knowledge and experience in analysing Software Requirement Specification and identifying and creating the required test scenarios, test cases, test data and document traceability matrix to ensure sufficient test coverage.
• Experience in executing test cases and test plans to support the quality assurance activities throughout the software lifecycle.
• Healthcare domain knowledge.
• Experience in testing mobile apps.
• Experience in Automation of Web Applications.
• Good Knowledge in using Version control Management tools such as Bitbucket, GitHub and sound understanding of the code review process.

Shortlisted candidates will be offered a 1 Year Agency contract employment.

Job Description:

• Drive strategic initiatives that maximize the team's positive impact on the public good, including taking an active role in team delivery of product and engineering goals.
• Delivering high-quality, maintainable, and reusable software systems
• Champion engineering best practices and establish tools to optimize team effectiveness and impact, including providing technical contributions and leadership to software engineers, coaching and mentoring them toward fostering a culture of technical excellence
• Influencing team direction towards achievement of high-priority initiatives (to maximize our impact on the public good)
• Establishing practices and tools to encourage a strong engineering culture and maximize engineering effectiveness and impact.
• Independently managing external (to the team) dependencies related to your work items.
• Working with other leaders to create a long-term technical plan and roadmap for the assigned squads, and for other squads as needed. Updating the roadmap regularly to meet future product/business needs and infrastructure requirements.
• Helping with recruitment, particularly for senior hires.

Job Requirements:

• Experience working on reasonably large, high-availability software systems that have operated at scale.
• Experience in modern full-stack web application technologies; experience in modern front-end engineering on Next.Js/React.js and Java/TypeScript on the backend is preferred.
• Have a strong sense of what it means to be a technical leader, particularly as it relates to the suite of soft skills beyond just your technical chops.
• Passion towards engineering excellence; you deeply understand that software engineering is a team sport, and you take pride in the craftsmanship aspect of software engineering.
• Passion towards working for public good with interest.
• Interest and experience in coaching and growing junior engineers.

Job Description:

• Drive strategic initiatives that maximize the team's positive impact on the public good, including taking an active role in team delivery of product and engineering goals.
• Delivering high-quality, maintainable, and reusable software systems
• Champion engineering best practices and establish tools to optimize team effectiveness and impact, including providing technical contributions and leadership to software engineers, coaching and mentoring them toward fostering a culture of technical excellence
• Influencing team direction towards achievement of high-priority initiatives (to maximize our impact on the public good)
• Establishing practices and tools to encourage a strong engineering culture and maximize engineering effectiveness and impact.
• Independently managing external (to the team) dependencies related to your work items.
• Working with other leaders to create a long-term technical plan and roadmap for the assigned squads, and for other squads as needed. Updating the roadmap regularly to meet future product/business needs and infrastructure requirements.
• Helping with recruitment, particularly for senior hires.

Job Requirements:

• Experience working on reasonably large, high-availability software systems that have operated at scale.
• Experience in modern full-stack web application technologies; experience in modern front-end engineering on Next.Js/React.js and Java/TypeScript on the backend is preferred.
• Have a strong sense of what it means to be a technical leader, particularly as it relates to the suite of soft skills beyond just your technical chops.
• Passion towards engineering excellence; you deeply understand that software engineering is a team sport, and you take pride in the craftsmanship aspect of software engineering.
• Passion towards working for public good with interest.
• Interest and experience in coaching and growing junior engineers.

• Developing and planning engineering strategies
• checking on paper and site work progress
• conducting project safety briefing
• controlling materials order and usage
• supervising construction team
• increasing company's work quantity and quality
• ensure that structure are constructed in a safety and sturdiest manner
• reporting to director and PM
• liaise with consultants, conractors and authorities
• miscellaneous duties and adhoc works

To express your interest in this opportunity/position, please click APPLY NOW or forward your CV to [email protected]

Kindly note that only candidates selected for shortlisting will be contacted.

JOB DESCRIPTION:

We are seeking a highly skilled and experienced Licensed Aircraft Engineer to join our team in Singapore. The ideal candidate will be responsible for performing and certifying aircraft maintenance tasks, attending to routine transit/daily/weekly/monthly checks, troubleshooting, and repairing aircraft and engines, and ensuring compliance with regulatory requirements and company policies and procedures. The role is a mixture of base and line maintenance, with the percentage allocated depending on workload.

RESPONSIBILITIES:

• Perform and certify aircraft maintenance tasks including inspection, repair, modification, and functional tests.

• Attend to routine transit/daily/weekly/monthly checks and other line maintenance duties.

• Inspect, troubleshoot, and repair aircraft and engines and all associated aircraft systems.

• Inspect finished work, carry out operation/functional tests, and rectify aircraft defects.

• Sign-off all tasks performed and comply with Airworthy Release.

• Manage and maintain tool & equipment store and provide recommendations, if applicable.

• Base Maintenance: 70%, Line Maintenance: 30%, depending on workload.

• Ensure that all maintenance activities comply with regulatory requirements and company policies and procedures.

• Maintain accurate records of all maintenance activities performed.

• Collaborate with other maintenance and engineering personnel to troubleshoot and resolve complex aircraft issues.

REQUIREMENTS:

• A valid CAAS license or an Aircraft Maintenance License, that is transferable to a Singaporean CAAS license (EASA, CASA, DCAM, etc.).

• Possess at least 2 type ratings, with a minimum of one of the following type ratings: A320, A350, A380, B747, B777, and/or B787.

• At least five years of experience as an LAE.

• Excellent interpersonal and communication skills (proficient in English reading and writing).

• Good customer relationship skills.

To express your interest in this opportunity/position, please click APPLY NOW or forward your CV to [email protected]

Kindly note that only candidates selected for shortlisting will be contacted.

Our Client is a leader in the Energy Manufacturing industry in Singapore. Due to their current expansion plan, they are looking for an Electrical Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsible;

• Resolve plant faults by performing troubleshooting and conducting root cause analysis.
• Implement approved plant improvement projects and generate technical specifications for equipment parts and work services. Initiate requisitions when necessary.
• Conduct scheduled plant inspections based on the maintenance regime and carry out plant maintenance activities.
• Supervise maintenance contract works and develop work procedures for all maintenance tasks.
• Prepare comprehensive reports on a weekly and monthly basis, covering activities, overhauls, technical matters, and trips.
• Any ad-hoc duty as assigned

Job Requirements:

• Min degree in Electrical Engineering
• Exhibit good knowledge in Electrical systems.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Job Description

• Industry/ Organization Type: IT / Software
• Position Title: Data Center Engineer
• Working Location: Boon Lay
• Working Hours: 5 days, Mon – Fri (Morning Shift 6 AM – 2 PM / Afternoon Shift 2 PM – 10 PM)
• Salary Package: Basic Salary up to $5,000 + AWS + Bonus
• Duration: Permanent Role

Key Responsibilities

• Perform periodic walk-through, validation of equipment status, amber lights check, etc.
• Review work order requests in the queue and respond to semi-routine work orders by adhering to commitment times.
• Escalate and expedite orders to appropriate teams upon standard operating procedures.
• Rack and stack semi-routine customer equipment tickets.
• Support datacenter standard operating cross-connect work order requests.
• Support standard operating testing and standard operating installations of customer assets.
• Support standard operating procedures of layer 1 cross-connect certification testing.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma / Degree in IT/Computer Science, or related field.
• Minimum 1 year of IT experience or equivalent.
• Prior working experience in a Data Center, Network or Server environment would be an added advantage.
• Must be comfortable with shift rotation.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66104 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyze and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Bachelor’s degree in computer science, Software Engineering, or a related field (Advanced degrees are a plus).
• Minimum of 5 years of professional experience in Software Quality Assurance.
• Proven experience with automation testing, particularly using Cypress for E2E testing.
• Hands-on experience with performance testing tools like Gatling and Autocannon.
• Experience with contract testing frameworks such as Pact.js.
• Proficiency in JavaScript (TypeScript) and familiarity with Go.
• Solid understanding of frontend and backend technologies, including ReactJS, ExpressJS, and Gin-gonic.
• Experience with AWS services, Docker, and Kubernetes.
• Familiarity with CI/CD pipelines using GitLab and ArgoCD.
• Knowledge of relational databases (MySQL, PostgreSQL) and caching solutions (Redis)
• Understanding of REST API, GraphQL API, JWT authentication, and Elasticsearch.
• Experience with logging and monitoring tools like Splunk or OpenSearch.

Overall Job Purpose

To independently determine and draft the Requisitions for packages of mechanical components and / or equipment that are required in a project, assists in evaluating the technical aspects of bids and executing in order to deliver the packages on time and to ensure that the packages meet the technical requirements.

Core Responsibilities

• Understands the specifications and requirements in the area of mechanical components and equipment (such as compressors, heat exchangers, pressure vessels, pumps etc.) of the assigned project.
• Independently develops technical specifications and attachments that are part of Requisitions.
• Independently evaluates the technical and engineering aspects as well as issues related to components delivery of bids received from suppliers and gives assessment to the Senior Engineer.
• Generally, Senior Engineers are assigned complex packages and / or medium risk equipment
• Upon award to the successful tenderers, executes the orders for complex and / or medium risk packages by ensuring that documents (such as data sheets, drawings etc.) provided by the suppliers are complete, accurate and in order.
• An example is the specifications and information related to the interfacing between the mechanical component and other components.
• Being the focal point in respect of those packages handled, liaises and coordinates with various internal stakeholders, other discipline engineers, quality team, Engineering contractors and suppliers, ensuring that their needs are met timely and according to the specifications.
• Periodically visits suppliers, checks and tests the packages and their components to ensure that they function as per specifications. Occasionally, has to work with the suppliers to rectify the components making sure that they comply with the specifications and are ready on time
• Provides technical/engineering support and advice to Construction/Commissioning work at site, trouble shoots and follows up with suppliers to rectify the defects or problems.
• Resolves technical issues independently that may arise during the execution of packages handled using expert knowledge and technical know-how, and takes part in HAZOP workshop related to the assigned package and ensures recommendations are incorporated in the completed package with appropriate HAZOP close out.
• Is responsible for capturing lessons learned in his/her functional area, entering in MIMS, and closing out project related MIMS actions.

Qualifications & Experience

• Bachelor in Mechanical Engineering
• 12 years or more of relevant working experience in Mechanical engineering in oil and gas sector.
• Is aware of

1. Applicable industry standards, Company standards, specifications and procedures for his functional area;
2. Expert knowledge in the application of mechanical components such as pressure vessels, heat exchangers, pumps, compressors, Generators etc and market practices in the oil and gas sector.

Brunel International S.E.A Pte. Ltd

UEN No: 199603098R

EA License No: 16S8067

Shinu Alexander: R1657042

Our client is transforming the cleaning industry with advanced robotic solutions that tackle manpower challenges. Their innovative robots are already making a difference in 30 countries! As they continue to grow, they are seeking a Hardware Embedded Engineer (Senior) to join their team.

As a Hardware Embedded Engineer (Senior), you'll design and develop embedded hardware, optimize performance, ensure industry compliance, and mentor junior engineers.

Responsibilities:

• Design, document, and develop optimized hardware solutions.
• Conduct testing, bug fixing, and improve hardware performance.
• Perform PCB layout design and schematic capture.
• Create and maintain PCB library, schematics, and Bill of Materials (BOM).
• Prepare documentation and plans to support product certification and approval processes.
• Assist in troubleshooting product issues during production and in-service stages.
• Perform logical design tasks, including creating netlists and routing rules based on customer-provided information.
• Carry out PCB physical layout tasks such as parts placement, routing, and trace length adjustments.
• Apply electrical knowledge in high-speed, RF, and power PCB design to meet project requirements.
• Ensure designs are manufacturable by working with PCB suppliers and applying best practices to optimize cost and yield.
• Verify internal design tools and provide feedback to the development team.
• Develop design processes to reduce cycle time, minimize defects, and enhance product performance.
• Prepare detailed design documents and support training requirements.

Requirements:

• Minimum of 4 years of relevant PCB design experience.
• Experience with designs involving 6+ layer PCBs.
• Strong background in analog and mixed-signal PCB design, and experience working with PCB manufacturers to improve manufacturability.
• Proficient in logical net listing, schematic design, electrical rule creation, and signal/power integrity optimization.
• Solid knowledge of EMI/EMC handling and ESD precautions.
• Experience with blind, buried, and micro vias is a plus.
• Scripting skills in languages like Skill, Python, or others are advantageous.
• Experience in RF backplane, electrical package design/routing, and familiarity with robotics, automotive testing, or ATE industries is a plus.
• Strong attention to detail, teamwork skills, and good communication abilities.
• Proven ability to meet project deadlines consistently.

Interested candidates are invited to send in your Resume in MS Word Format stating your past work experience, reasons for each leave, past and expected remuneration.

We regret to inform that only shortlisted candidates will be notified.

By submitting an application to us, you will be deemed to have agreed for us to collect, use, and disclose your personal data which you have submitted to your prospective employers, for the purpose of job search, and/or other services which you have consented us to perform on your behalf.

Attn: Woo Gu Ming (R24123795)
Cultivar Asia Pte Ltd (MOM EA License: 19C8782)