Job Responsibilities:

· To perform calibration of Test and Measurement (T&M) equipment.

· To provide quality support to customer technical enquiries.

· Install and optimize hardware/software/network products and configuration at bench or customer sites.

· To meet customer target in Quality and Turn-around time.

Job Requirements:

l Candidate must possess at least ITE/Diploma in RF Engineering (Electrical/Electronic) or equivalent.

l At least 1-2 year(s) of working experience in Test & Measurement environment.

l Expected to know basic knowledge of electronic instruments.

l Familiarity with general purpose instruments like Mutimeters and scope.

l Basic knowledge of repair and troubleshooting skill and basic understanding of calibration.

l Good repair analysis skill and judgment call.

l A proactive and keen learner of new technology.

l Excellent customer service attitude, good team player and ability to work under stress.

l Good verbal and written communication skills.

l Ability to work independently, sharing skill set and quick to adapt to new technologies.

Benefits:

· AWS

· Yearly increment

· 5-day work week

· 14-day Annual Leave

· Medical and Dental

· Work Injury Insurance

· Overtime Pay

The title holder will be part of a team that design, test and commission electrical control systems for ACMV/HVAC systems in buildings. The candidate will work with other internal engineering teams to design the control system to meet the overall project objectives and goals.

Specific job responsibilities:

• Design and develop control strategy for automation system controls for building M&E systems (ACMV)
• Design and draft system control logic and drawing to meet project commitments
• Work closely with internal teams such as mechanical design and project engineers to design effective solutions to solve engineering problems
• Liaise with suppliers on components selection and quotation to develop project costing
• Review specifications and standard practices for projects and tenders
• Addresses issues brought about by feedback from customers and operations teams to improve the performance of the electrical and controls system

To excel in this job, the candidate will require a high level of organization, creativity, attention to detail, and engineering knowledge to successfully perform design, engineering and field start up tasks for System Integration in Electrical Controls for building M&E systems.

Minimum job requirements:

• Bachelor’s degree in Electrical/Controls/Electronics Engineering
• Relevant experience/ experience in ACMV design/controls is a plus
• Exceptional communication skills (written and verbal)
• Ability to prioritize and work independently to meet project timelines

• Able to implement a security architecture blueprint (from devsecops, application, infrastructure, operational security, for applications to interact with). Define the process, provisioning, interfaces and provide recommendations.
• Access management and control.
• Engage and execute Security Vulnerability Scanning activities (HCR/NVA/Pen Test/ SAST/DAST activities etc) and resolve findings.
• Manage Access management and SIEM tools in the environment.
• Facilitate auditing processes conducted by external parties.
• Familiar with operational security processes
o OS level patching
o Application-level patching
o Operational housekeeping and archival.
o Server and application hardening procedure & steps
o IM8 policy
o Vulnerability Assessment
o Security Incident detection and reporting
o SSL certificate renewal

Technologies & Skills Required
• OS Administration (Linux / Windows)
• IBM Security Verify Access
• IBM Qradar
• Thales HSM
• OpenSSL
• Tenable Nessus, Burp Suite Enterprise

Top 3 MUST have skills:
• Minimum 2+ years of experience with IT Security.
• CISSP/CCSP/CCSK certification or its equivalent is preferred
• 1-2 areas of Cyber Security domains such as Identity Access Management, Security and Risk Management, Application and Network security, Vulnerability Management with a broad understanding of other areas.


Good to have skills (Optional)
• Familiar with Singapore Government standards of security posture including planning and running SSAT, Security Compliance Check, Security Vulnerability Scanning, DAST & SAST.
• Work with security tools & environment.

Our company is expanding into providing installation of solar panel systems and clean energy. The candidate should be an electrical engineer with knowledge of solar systems integration to SP grid and have experience or is familiar with the requirements of EMA. Selected candidate will be responsible for the application/submission, supervise the installation of the solar systems, connection to SP grid, Testing and commissioning of systems. Renumeration will based on qualifications and experience. Only shortlised candidate will be informed for an interview.

Responsibilities:

• Good technical and project management abilities.
• Strong ability to develop, plan and organize resources efficiently.
• Communicating plans and challenges and options in engineering issues and solutions to various stakeholders and Clients alike.
• Inspiring a team of different nationalities and cultures.
• Professional integrity and exemplary conduct at all times.
• Proven problem-solving and achievements.
• Comfortable at work site conditions.
• Site supervision and able to co-ordinate well with sub-contractors, RE and RTO.

Requirements:

• At least 3 year(s) of relevant working experience in construction is required for this position.
• Candidate must possess at least a Degree in Engineering (Civil/Structural) or equivalent.
• Preferably Managers specializing in Engineering - Civil/Construction/Structural or equivalent.
• Knowledge in Microsoft project.
• Full-Time positions available.

Applicants are to email to [email protected]

Job Scope:

• Supervise site operations and daily activities on construction or engineering sites
• Manage project timelines to ensure the project stays on schedule
• Coordinate with contractors, subcontractors, and suppliers for timely delivery of materials and services
• Ensure quality control by conducting site inspections and monitoring work to meet design specifications
• Monitor and enforce safety standards to comply with health and safety regulations
• Manage resources, including manpower, equipment, and materials for project efficiency
• Provide technical support and troubleshoot issues as they arise on-site
• Review plans, blueprints, and technical drawings, offering feedback and solutions
• Prepare daily and weekly progress reports for senior engineers or project managers
• Maintain accurate project documentation, including records of site activities and materials used
• Assist in cost control by monitoring project expenses and tracking material usage
• Supervise the installation of systems or equipment as required
• Collaborate with design engineers, architects, and other stakeholders to ensure project alignment with design
• Conduct and participate in site meetings to discuss progress, challenges, and next steps

Requirements:

• Degree in Civil Engineering or equivalent
• 3-5 years of relevant experience, with at least 2-3 years in LTA underground or MRT projects
• Experienced in managing underground projects, including D-wall, borepiling, and other structural works in Singapore.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Main role and responsibilities
• Take ownership of multiple application products and its operational aspects of patching, application support etc. Eg, Websphere/IBM MQ/QlikSense/Sharepoint/Pega etc
• Take part in application architecture sessions with build teams to provide inputs on integration points like Web services, interfaces for MQ and SFTP
• Familiar with setting and defining operational processes.
• OS level patching
• Application-level patching
• Operational housekeeping and archival.
• Backup and recovery etc
• Familiar with Government level security concepts in hardening, scanning, security posture and mindset
• Troubleshooting Application and/or Infrastructure related problems
• Operational mindset to provide onsite support upon notice when issue occurs, including after office hours
• Monitoring and maintaining of IT system and application assets for the project

Top Must have skills / Primary skills
• Basic Networking Knowledge
• Basic Server Administration for Windows and Unix Operation systems
• Understanding of Enterprise 3-tier architecture

Good to have skills (Optional)
• Familiar with Agile process and tools so that can understand develop process and tools to support SDLC
• Scripting (Bash/Perl/Powershell etc)
• Familiar with Web application from end user interaction to backend servers and databases
• Knowledge on virtualization, containerization, and cloud computing infrastructure
• Familiar with IT Security Hardening and Vulnerability Assessment

Job Description

• Able to implement a security architecture blueprint (from devsecops, application, infrastructure, operational security, for applications to interact with). Define the process, provisioning, interfaces and provide recommendations.
• Access management and control.
• Engage and execute Security Vulnerability Scanning activities (HCR/NVA/Pen Test/ SAST/DAST activities etc) and resolve findings.
• Manage Access management and SIEM tools in the environment.
• Facilitate auditing processes conducted by external parties.
• Familiar with operational security processes
o OS level patching
o Application-level patching
o Operational housekeeping and archival.
o Server and application hardening procedure & steps
o IM8 policy
o Vulnerability Assessment
o Security Incident detection and reporting
o SSL certificate renewal
Technologies & Skills Required
• OS Administration (Linux / Windows)
• IBM Security Verify Access
• IBM Qradar
• Thales HSM
• OpenSSL
• Tenable Nessus, Burp Suite Enterprise

Top 3 MUST have skills:
• Minimum 2+ years of experience with IT Security.
• CISSP/CCSP/CCSK certification or its equivalent is preferred
• 1-2 areas of Cyber Security domains such as Identity Access Management, Security and Risk Management, Application and Network security, Vulnerability Management with a broad understanding of other areas.


Good to have skills (Optional)
• Familiar with Singapore Government standards of security posture including planning and running SSAT, Security Compliance Check, Security Vulnerability Scanning, DAST & SAST.
• Work with security tools & environment.

We are representing our client in the Aerospace industry to hire for an Operations Engineer.

Responsibilities:

• Provide technical support to production operations.
• Liaise with OEMs on technical concessions and repairs.
• Issue rework instructions and update technical routers.
• Support special processes (e.g., machining, NDT, electroplating).
• Develop repair capabilities and design tools/fixtures for component overhaul.
• Investigate failures and recommend preventive measures.
• Perform vendor audits and support continuous improvement initiatives.

Requirements:

• Degree in Aerospace, Mechanical, or related engineering field.
• At least 2–3 years of experience in aerospace engineering.
• Knowledge of ATR, A320, or B737 landing gear overhaul preferred.

Interested candidates please apply here.

EA Personnel (Koh Pei Wen)

EA Reg: R23115205

APBA TG Human Resources Pte Ltd

EA License: 14C7275

Our Client:

• Engineering Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $8,000 per month

Responsibilities:

• Design and build data pipelines infrastructure to collect, process and store data from various sources.
• Develop data assets platform to provide a centralized repository for managing and accessing data assets.
• Implement automated SQL queries based on user-defined criteria or business requirements.
• Use techniques like query templates, metadata-driven generation, or machine learning algorithms to generate SQL queries.
• Create new IPs in Singapore in area of expertise.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new technology development.

Requirements:

• Degree / Masters / PhD in Computer Science, Data Science, Statistics Applied Sciences or related field.
• Proficiency in Python, SQL, Java or Scala programming languages.
• Understand data warehousing concepts, ETL (Extract, Transform, Load) processes and tools like Informatica, Talend, or Airflow.
• Knowledge of relational databases (MySQL, PostgreSQL, Oracle) and NoSQL databases (MongoDB, Cassandra).
• Familiar with Apache Airflow, Kubernetes or Ansible for automating data pipelines and infrastructure.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

• Assists Project Manager in the co-ordination of project management activities to ensure that projects are executed in a smooth and effective manner;
• Attends external project kick-off meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting;
• Assists Project Manager in carrying out all shop drawings and submission with Drafting Department;
• Assists Project Manager in carrying out risk assessment and other risk management activities; makes recommendations on risk control measures; communicating risk assessment to all workers;
• Ensures all contractors are safety inducted and issued with Permit before work commencement;
• Ensures the adherence to the safe work procedure (SWP) established; to inform project manager or project director of any shortcoming in the SWP or risk control measures implemented;
• Ensures the familiarization with the scope of works;
• Resolves site problems proactively in a timely manner and seeks advice from Project Manager as appropriate;
• Ensures the timely preparation of project progress and other reports;
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation;
• Co-ordinates daily activities of workers’ duties and to ensure that they are performed in a proper manner;
• Makes daily checks on work progress, housekeeping and safety implementation on site with safety personnel;
• Assists in cost control by cutting materials wastage, reducing labour cost, usage of tools and equipment, etc;
• Assists the Project Manager in conducting Mass Tool Box meeting with safety personnel;
• Ensures proper project documentation including email communication;
• Assists in promoting good team morale and team spirit in the project team;
• Strong in Structural work

12-hr rotating shift, 7.30am - 7.30pm, 7.30pm - 7.30am

Responsibilities

• Responding to intrusion alarm system activations
• Performing maintenance services on alarm systems
• Commissioning new alarm systems
• Attending to customer requests regarding alarm and card access systems
• Conducting night patrols

Requirements

• At least a Higher Nitec qualification
• High level of energy
• Good interpersonal communication skills
• Valid Class 3 license
• Min 1 year of working experience
• Enhanced Basic Security certification is an added advantage
• Ability to work 12-hour rotating shifts

Devon Yang Yue Teng

EA License No: 24C2352

Reg No: R24123723

Roles & Responsibilities

Job Description

• Industry/ Organization Type: Engineering
• Position Title: Mechanical Engineer
• Working Location: Tuas South
• Working Hours: 5 days (Mon to Thurs 8 am to 6 pm, Fri 8 am to 5 pm)
• Salary Package: Basic Salary + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Follow up on projects from start to finish, including quotation, on-site work, invoicing, and service report.
• Lead technician teams through projects.
• Independently execute engine repairs and overhauls on board and on site.
• Dismantle, repair, replace, and reassemble mechanical parts.
• Troubleshoot and recommend repair solutions for machinery breakdowns.
• Conduct daily toolbox meetings with teams, ensuring safe work practices.
• Complete repairs, maintenance, and overhauls on time.
• Deliver high-quality services to satisfy customers.
• Prepare quotations for new inquiries and manage job costs within budget.
• Prepare service reports after project completion.
• Plan job methods and work schedules.
• Communicate with customers to ensure smooth project completion.
• Coordinate with local or overseas agents for job deployment and preparation.

APPLY NOW!!!

• Diploma or Degree in Marine/Mechanical Engineering or equivalent
• At least 3 years experience
• Able to work with tight schedules
• Willing to perform hands-on mechanical repairs, installations, and removals
• Willing to work on-site and in workshops with occasional irregular hours

Monday to Friday
9am to 6pm

Collaborate closely with management to fulfill project responsibilities:

• Take the lead on AV initiatives and provide input for project procurement.
• Offer expert advice on project plans and layouts.
• Assist in the procurement of AV hardware and software, ensuring project needs are met.
• Plan, maintain, and monitor project timelines, intervening when necessary, and managing equipment storage and transportation.
• Perform rack and stack, onsite installation, upgrades, troubleshooting, and repair of AV equipment, networking, and other in-house projects at customer premises.
• Complete electrical wiring, trunking, programming, and basic construction setups (may require the use of a ladder).
• Manage, test, and commission CCTV, door access, ELV equipment, Bluetooth devices, and other necessary devices.
• Ensure timely completion of testing, configuration, staging, and upgrades for assigned projects.

Collaborate closely with management to fulfill project responsibilities:

Take the lead on AV initiatives and provide input for project procurement.

Offer expert advice on project plans and layouts.

Assist in the procurement of AV hardware and software, ensuring project needs are met.

Plan, maintain, and monitor project timelines, intervening when necessary, and managing equipment storage and transportation.

Perform rack and stack, onsite installation, upgrades, troubleshooting, and repair of AV equipment, networking, and other in-house projects at customer premises.

Complete electrical wiring, trunking, programming, and basic construction setups (may require the use of a ladder).

Manage, test, and commission CCTV, door access, ELV equipment, Bluetooth devices, and other necessary devices.

Ensure timely completion of testing, configuration, staging, and upgrades for assigned projects.

Provide comprehensive project services:

• Liaise with clients to understand their requirements.
• Conduct quality control analysis prior to events.
• Diagnose and resolve technical issues, both hardware and software, as needed.
• Respond to service calls related to equipment breakdowns.
• Provide on-site support and user training at end-users' premises.
• Ensure production and updating of documentation such as user guides, etc.
• Follow up with the finance department regarding costing and billing.

Devon Yang Yue Teng

EA License No: 24C2352

Reg No: R24123723

Job Overview

We are seeking an experienced NetApp Engineer to join our team. This role blends the responsibilities of a technical consultant with those of a support engineer. The ideal candidate will be responsible for designing, implementing, and optimizing NetApp storage solutions, as well as providing in-depth technical support to our clients. This dual role requires a well-rounded professional with strong expertise in NetApp technologies, excellent problem-solving skills, and a customer-focused approach.

Professional Services Responsibilities

Solution Design and Implementation:

• Design, configure, and deploy NetApp storage solutions (including ONTAP, SnapMirror, SnapVault, etc.) to meet client requirements for storage, data protection, and disaster recovery.
• Provide NetApp solutions to meet specific client needs, considering performance, capacity, scalability, and budget.
• Develop technical documentation, including solution architectures, deployment guides, and as-built documentation.

Technical Consulting:

• Serve as a NetApp advisor for clients on storage best practices, solution architecture, and storage optimization.

Support Responsibilities

Technical Troubleshooting and Support:

• Provide support for NetApp storage solutions, diagnosing and resolving.
• Act as an escalation point for Level 1 support teams, handling fault cases and return and replacement of faulty equipment.
• Engage with NetApp support for complex issues, coordinating troubleshooting efforts and solutions for clients.

Requirements

• Education: Bachelor’s degree in Computer Science, Information Technology
• Certifications:
  • NetApp certifications (e.g., NCDA, NCIE, or equivalent) required.

Additional certifications in related storage, cloud, or networking technologies are a plus.

• Experience:
  • [3-5 years] of experience in NetApp storage solutions, including both implementation and support.
  • Experience with NetApp ONTAP, SnapMirror, SnapVault, and data management products.
• Technical Skills:
  • NetApp storage ASE certified (preferred) or with relevant experience
  • Understanding of storage protocols (NFS, CIFS, iSCSI, FC) and networking basics.
  • Familiarity with cloud storage solutions (AWS, Azure, or Google Cloud) and NetApp Cloud Volumes is preferred.
• Soft Skills: Excellent communication skills, a client-oriented approach, strong analytical and problem-solving skills, and ability to work independently or as part of a team.

Willingness to be on standly mode.

Degree / Diplom in Science, Electrical / Instrumentation / Process Control System

Prepare the ITP, QA / QC Check List, Quality plan and submit the documents to Client as per Pharma / Wafer Plant requirement

Monitor the Quality and provide the training for workers if quality lack before Client Inspection

Project Management and Quality Inspection with Client, Main contractor and Sub Contractor

Quality trainning including practical to the own team and Sub contractors.

Coordinate with Consultants, Clients, Sub Main contractor Manager / Engineer for update the site installation, Red Marking Drawings for approval, BOQ for Construction Works Execute

Must Experience in the usage of Bim MEP (Revit / Navis / NWD Software and 3D ) model to submit the drawing to clients

Prepare the materials BOQ to procurement team

Observation of the Safety violation and Correcting the unsafe works

Prepare the RA, SWP and MOS as per client required

The Project Engineer/Site Engineer is responsible for all project related matters for building construction works, steel works, A&A works, renovation works, etc

• Supervise and checking of all subcon and internal team, to ensure carried out in accordance to contractual specifications, quality standards, statutory compliance & client's requirements and safety.
• Assist Project Manager in all project matters, on-site technical/ engineering matters and authority submissions.
• Cooperate with site supervisor for all project and technical matters.
• Preparation of project weekly & monthly report, master schedule, micro task program, method of statement, construction sequence, hoisting plan, safe work procedure, risk assessment, any other technical documents.
• Co-ordinate works with Clients / Sub Contractors / Suppliers / Consultants.
• Plan & track the project progress, all site works, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all aligning with the project completion timeline.
• Technical expertise and knowledge in foundation, structural and building and steel works
• Other adhoc duties by Management assigned from time to time.

Requirements:

• Degree in Civil or Structural Engineering
• 3-5 years civil engineering project management / building construction in construction industry
• Excellent leadership, time management, analytical, communication, presentation and interpersonal skills
• Organized, meticulous with positive work attitude

Responsibilities:

• Render all M&E Engineering support to the M&E Manager/Project Manager/Planning Manager for the successful execution of the project
• Liaise and coordinate with clients, consultants, consultant representative (RE/RTO), relevant authorities and sub-contractors on M&E issues and challenges
• Coordinate with all M&E subcontractors, as well as project team structural and architectural colleagues to resolve all drawings, site discrepancy or technical issues
• Attend all project meetings and progress meetings relating to meeting master program schedule
• Ensure good M&E drawing management and the control of M&E documentation/filing on site
• Ensure timely production and submission of M&E shop drawings, materials submission and method statements & all M&E shop drawings, materials and method statement are to be approved before use
• Ensure all M&E site activities are well-planned, well-coordinated and on time
• Oversee and guide all M&E staff/Supervisors/sub-contractors, ensuring work is carried out in accordance with the approved shop drawings, materials and method statements
• Prepare accurate and comprehensive M&E progress report with photographs when required
• Arrange for all M&E T&C works
• Work with Consultants to come out with proper site inspection schedule to be carried out by the relevant government authorities
• Work closely with EHS Department to ensure strict compliance of safety regulations.Requirement:
• Degree in Mechanical/Electrical Engineering or related disciplines
• Minimum 3 years’ experience for Main Contractor in project management and/ or site coordination works for building or civil projects
• A team player and able to communicate well with all level

Job Description:

This role will support and collaborate with Design, planning, solution architect, application and Development teams on infra build requirements, standards and the use, optimization and troubleshooting of all features in VMware, Linux, Windows & its tools.

This role will participate in technical discussions to share ideas and provide feedback in continuing the improvement of the Service Build Engineering team in areas such as Optimization, automation, cost savings, technology adoption & operational efficiency.

Key Skill

- Red Hat Enterprise Linux (RHEL) and Windows Administration

- Must Have:

o Intensive experience in supporting RHEL for JBOSS/WebSphere/WebLogic, Oracle DB is a must

o Intensive experience in supporting RHEL in DMZ is a must

- Professional understanding of networking related to RHEL and Windows

- Professional understanding of SAN Storage related to RHEL and Windows

- Good understanding of large Data Center Facilities operation

- Hands-On experience supporting various Infrastructure agents like NetBackup, BMC Patrol

- (Mid-Level) vSphere 5.x and 6.x

- Cross-team collaboration with storage, network, security and application delivery

- Technical leadership quality to handle technical challenge and sensitive situations

- Integrate the server automation process either by custom scripts or via third-party solutions(Chef)

- Candidate should have the drive and intellectual horsepower to resolve user issues and support them through telephone, email, or via chat services as applicable

- Strong communications skills

- Excellent spoken and written English communication skills

Job Summary:

· Salary package: Basic $3500 - $4000 + Performance Bonus

· Working hours: Monday to Friday 9am - 6pm

· Working location : Kallang

Job Responsibilities:

Job Objective:
•⁠ ⁠Work closely with manufacturers and Engineers to implement and service audio visual and video conferencing solutions in accordance to company’s standards and best practices to meet customer’s requirements

Core Responsibilities:
•⁠ ⁠System configuration, Testing & Commissioning of Integrated Audio Visual and Videoconferencing solution.
•⁠ ⁠Conduct end user trainings to end users on how to use the Solution(s) implemented.
•⁠ ⁠Work closely with in house AV Designers and Engineers from different manufactures to implement full integrated solutions for venues like meeting room, lecture room, experience centre, command centre, auditorium, ballroom, etc
•⁠ ⁠Study the schematic drawings to understand the technical & functional requirements to implement each solution
•⁠ ⁠Assist in after sales services

Requirements:

•⁠ ITE/ Diploma in IT/Engineering/Audio Visual
•⁠ Minimum 2 years of experience in System configuration, Testing & Commissioning for Audio Visual solution. Good to have:
•⁠ Experience in some of the products like Videowall, LED & LCD Display, Digital Sound Processor (DSP), Amplifier, Speaker, videoconferencing, Audio Visual Switches.
•⁠ Experience in similar renowned AV brands like Samsung, Crestron, Extron, BOSE, Ev, Poly, Cisco, Logitech, etc
•⁠ Experience in Crestron, Extron, AMX, Kramer automation programming will be an added advantage
•⁠ Experience in DSP programming will be an added advantage

How to apply:

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret that only shortlisted candidates will be notified.

Elitez Pte Ltd | EA Licence: 16C8004| Tiong Hong Wee | Registration No: R23115259

• Able to use AutoCAD and read drawings (P&ID, isometrics, schematics, layouts etc).
• Able to process and define engineering requirements.
• Perform technical evaluations, review specifications, datasheets, and standards, including ITP and HAZOP, cause, and effect studies.
• Engage vendors, fabricators, consultants, and surveyors on engineering issues.
• Familiar with equipment integration work packages, including interfacing of structure, piping, instrumentation, and alarm systems.
• Generate and tabulate RFQs. Assess supplier, vendor and/ or sub-contractor proposals. Present techno-commercial recommendations and justifications.
• Prepare work packs, procurement, and quality plan. Monitor and follow up on documentation flow, procurement process and shipment according to project schedule.
• Develop project plan (schedule, resources, and material). Track project milestones and deliverables. Escalate issues where necessary.
• Highlight potential cost or time impact.
• Update MTO and procurement list.
• Assess risks and organize project risk register.
• Monitor and manage changes, inform, and track deviations.
• Coordinate interdisciplinary and subcontracting activities according to phase of project. Attend to site work (fabrication, installation, and testing) and drive performance in terms of manpower, QAQC and HSE.
• Able to draft technical reports and method statements in an organized manner.
• Conduct action review (AR) and lessons learnt (LL).
• Disseminate information in a timely manner ie. during and post project.
• Contextualise issues and facilitate dispute resolution.
• Follow up on client and/ or engineering comments, punch lists and NCRs.
• Assist with commissioning, project closeout and warranty claims.

Requirements:

• 3-7 years of working experience in Oil & Gas, Process, and/ or Marine & Offshore EPC (turnkey) projects (newbuilding, repairs, conversions, upgrades, and retrofits).
• Degree/diploma in Engineering or equivalent qualifications
• Knowledge of industry and statutory standards and codes.
• Able to work in fast-paced, multicultural, and disciplinary project teams.
• Flexibility towards working hours, primarily office based but with requirements for site attendance, e.g., time with clients and site inspections.
• Able to travel.
• Proficient in Microsoft applications (Excel, Words, Outlook).
• Demonstrate good verbal and written communication skills.
• Have good situation awareness and safety mindset.
• Professional qualifications such as Project Management or Ship Repair Manager Certificate will be advantageous.

Degree / Diplom in Electrical / Instrumentation / Process Control System

Project Site Management and Coordination with Sub Main Contractor

Supervise the own team and Sub contractors.

Coordinate with Consultants, Clients, Sub Main contractor Manager / Engineer for Design, Red Marking Drawings for approval, BOQ for Construction Works Execute

Must Experience in the usage of Bim MEP (Revit / Navis / NWD Software and 3D ) model to provide the drawing for construction team and Prepare the materials BOQ to procurement team

Execute the Electrical & Instrumentation construction progress based on main contractor schedule, coordinate with other trade contractor to sharing the CSD Support System

Observation of the Safety violation and Correcting the unsafe works

Prepare the RA, SWP and MOS for smooth operation

Monitor the Quality and provide the training for workers if quality lack before Client Inspection

prepare the ITP, QA/QC Check list as per Clientrequirement

Position Overview

The Facilities Engineer is responsible for managing the technical and infrastructure aspects of building operations, ensuring reliable, efficient, and cost-effective facility systems. This role includes overseeing mechanical, electrical, plumbing (MEP) systems, implementing preventive maintenance, troubleshooting issues, and enhancing building performance. With the adoption of smart building technologies, the Facilities Engineer also monitors, configures, and optimizes IoT-enabled systems for energy efficiency, security, and occupant comfort.

Key Responsibilities

Operations

System and Maintenance

• Maintain and troubleshoot HVAC, electrical, plumbing, and structural systems.
• Ensure compliance with safety standards and regulatory requirements for all building systems.
• Conduct regular inspections and preventive maintenance on mechanical and electrical systems.

Department

• Staff management including planning of resources, discipline, and achievement of targets.

Smart Building Management

• Integrate and manage IoT-enabled devices and Building Management Systems (BMS) to monitor and control building functions.
• Utilize data analytics to track energy usage, air quality, occupancy patterns, and system performance, identifying areas for improvement.
• Implement predictive maintenance using data from sensors and automation platforms to minimize downtime and extend equipment lifespan.

Energy Management and Sustainability

• Develop and implement energy-saving strategies, including optimizing lighting, HVAC, and building envelope systems.
• Monitor and adjust systems to improve energy efficiency through smart building technologies, such as automated lighting controls, smart thermostats, and renewable energy systems.
• Support initiatives to meet sustainability goals by minimizing the building’s carbon footprint and water usage.

Security and Safety Systems

• Oversee and maintain smart security features, such as access control, video surveillance, and occupancy sensors.
• Ensure life safety systems, including fire alarms, sprinklers, and emergency lighting, are operational and integrated with smart building protocols.
• Conduct safety audits and emergency drills to prepare for and mitigate potential risks.

Project Management

• Lead facility upgrade projects, including installing new equipment, retrofitting systems, and integrating smart building technologies.
• Coordinate with contractors, vendors, and cross-functional teams to execute building improvements on schedule and within budget.
• Manage documentation, including as-built drawings, equipment manuals, and maintenance records.

Compliance and Documentation

• Ensure all building systems meet local, state, and federal regulations.
• Maintain accurate records of inspections, maintenance, and repairs.
• Prepare reports on facility performance, energy use, and compliance for management review.

Budget

• plan, budget and control spend to ensure best value is received

Vendor & people management

• work and maintain excellent vendor relationship.

Team Player

• Support other lines of services within the Account – locally on events and other assistance required.
• Support other offices eg Hub Asia, only when necessary

Skills and Qualifications

• Bachelor’s degree in engineering (Mechanical, Electrical, Civil, or a related field) or equivalent experience.
• 3-5 years of experience in facilities management or building engineering.
• Strong understanding of Building Management Systems (BMS), IoT devices, and smart building technologies.
• Knowledge of HVAC, electrical, plumbing, and structural systems in commercial or industrial buildings.
• Experience with energy management practices and sustainable building operations.
• Proficiency in data analysis and diagnostic tools for system performance monitoring.
• Excellent problem-solving and project management skills.
• Strong communication skills for collaborating with stakeholders, contractors, and vendors.
• Experience in managing and leading projects.

Smart Building Features for Facilities Engineers In the role, the Facilities Engineer is increasingly expected to use technology to improve operational efficiency and occupant experience. Some smart building features they may work with include:

• Automated lighting and climate controls that adjust based on occupancy and time of day.
• Predictive maintenance systems that alert to potential issues before breakdowns occur.
• Energy management systems that monitor consumption and optimize utility usage.
• IoT-enabled safety and security systems that enhance protection and monitor access.

The Facilities Engineer’s role in smart buildings is to harness these technologies to ensure efficient, sustainable, and safe building operations.

Requirements:

• Bachelor's Degree or Diploma in Civil Engineering.
• Minimum 5 to 8 years experience is required for this position.
• Must have experience in level 4 planning
• Must have Working Experience in Primavera P6.
• Experience on Tender Submissions will be an added advantage.
• Experience in building civil projects with the main contractor in construction projects.

Job Description:

• Assist the Project Manager in preparing Level 2 to Level 4 construction schedule in Primavera, Planning Projects within allocated budget and resources within the established timeline.
• Monitor progress, schedules and plans for new proposals of Projects.
• Prepare progress S Curve, coordinate and attend meetings with clients and contractors..
• Prepare project progress summary.
• Prepares scheduling documents & construction document planning documentation for tender & project execution
• Performs project performance analysis including earned value through analysis of man-hour resources including productivity of third parties
• Prepares progress reporting, developing and updating progress curves and briefing materials as required to measure and assess progress
• Maintain logical schedules in software Primavera P6 to determine problem areas and alert project team to critical scheduling issues

S. A. ENGINEERING PTE LTD

Civil Engineer

Salary range – S$3,500.00 to S$5,500.00

Job Description – Civil Engineer

Responsibilities

- Project site management mainly related to Steel Structure / Metal / RC / Architectural works

- Manage and handle on-site technical matters

- To prepare site related forms like Method Statement, Risk Assessment, Safe Work Procedures, etc

- Coordination with personnel from both main-contractors and sub-contractors

- Coordination with Professional Engineers

- Coordination with relevant Government agencies like LTA, SMRT, SCDF, etc

- Ensure project is executed in accordance with the construction standards and specifications

- Ensure project is on schedule and within budget

- To do on-site measurements and tally the measurements to drawings

- To prepare / amend / study shop-drawings and give comments

- To make sure all site staff attend the Tool Box Meetings (TBM)

- Any other ad hoc duties assigned by the Senior Management

Requirements

- Minimum Diploma / Degree in Civil Engineering or similar course

- Has at least 5 years of experience in Singapore in the related field

- Has experience working for LTA projects / high-rise buildings

- Familiar with Microsoft Office (Word & Excel in particular)

- Must have good interpersonal / social skills to explain, communicate, liaise, negotiate with the Senior Management, own construction team, and main-contractors and/or subcontractors

Expectations

- Have good work ethics and shows camaraderie with other employees

- Have good presentation skills when meeting clients (Organized and neat)

- Have good interpersonal sills

- Is self-motivated and willing to learn

- Able to perform in challenging environment

- Values respect, responsibility and humility

Interested candidates who meet the qualifications and requirements may email their resumes.

Only short-listed candidates will be notified