• Identify and resolve problems with marine motors, auxiliary engines, steering systems, and other related components.
• Repair inboard and outboard engines, focusing on fuel, cooling, and exhaust systems.
• Perform regular maintenance to ensure the proper functioning of all shipboard systems.

Requirements:

• Diploma in Marine Engineering or equivalent.
• At least 2 years of nautical maintenance and repair experience.
• Skilled in using diagnostic tools and marine service equipment.
• Good understanding of marine engines, auxiliary engines, and cargo pumps.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Collaborate closely with the Planning and Project Controls Manager to perform planning and scheduling, risk management, cost control, and reporting activities throughout the detailed design and construction phases of the project.
• Act as the main contact for planning, scheduling, and cost analysis, developing accurate cost forecasts and actionable reports to support effective project management.
• Prepare and deliver clear status reports, issue network-based schedules, update Primavera P6 with project progress, and monitor earned value systems to guide team performance and understanding.
• Strong knowledge of planning and scheduling to identify scheduling issues and recommend corrective actions and implement relevant control services.

Requirements:

• Degree in Project Management or equivalent
• At least 5 years EPC/full-service project delivery processes and apply project controls methodologies and practices specifically related to cost control development.
• Strong verbal and written communication skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24125585

Responsibilities:

• The 1st Level Remote Support is required to provide 1st level troubleshooting to users queries/incidents received (regardless of source; in a professional and timely manner)
• Provide First Call Resolution (FCR) technical support via phone and email.
• Ensure calls are answered and emails are responded in a timely manner.
• Perform first level troubleshooting on all reported incidents and escalate incidents to 2nd level resolver groups as per work instructions.
• Furnish and submit timely updates to customers on the status of outstanding issues within targeted Service Level
• Maintain ownership of cases and follow-up on reported issues until closure and gather accurate and complete relevant information is recorded.
• Manage customer expectations and notify Team Lead in the event of unusual surge in calls of a specific nature.
• Handle initial classification/ prioritization of the incidents. Track the progress of resolution and provide regular updates for follow-up actions and incident status.

Requirements:

• Min Higher Nitec in any discipline
• Min1 year End user support experience, Desktop or Technical Service Desk.
• Knowledge in Windows OS, Active Directory Account Administration, MS Outlook, mobile devices support.

Responsibilities

• Collaborate closely with engineers to support Dry Etch process development.
• Analyze test data and set parameters for material and process specifications.
• Lead and coordinate reviews with engineering/scientific teams to ensure processing techniques align with design requirements.
• Innovate and implement new or enhanced process formulations, defining equipment needs and assessing production methods for effectiveness.
• Plan and lead projects focused on introducing new concepts, advanced automation technologies, and improved process strategies.
• Partner with cross-functional engineering teams to identify and resolve integration and process issues.

Requirements:

• Bachelor’s degree in Chemical Engineering, Materials Science Engineering, or a related field.
• Minimum of 2 years of hands-on experience in Dry Etch process development.
• Strong communication abilities with good interpersonal interactions.
• Detail-oriented, organized, and a resourceful team contributor.
• Self-driven and capable of working with minimal supervision.
• Project management skills are highly advantageous.
• Comfortable working in a cleanroom environment.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QVRX6Y98

To apply, It will be great if you could share your CV to [email protected]. Alternatively, you can apply at https://lnkd.in/gxuq4dY5

• Permanent role with an established company
• Exposure to wide range of technologies including cloud

About the company

Our Client is an established company within their industry. They have a well-established presence of more than 20 years with a global footprint of more than 5 countries. With rapid expansion plan, they are now looking for a .net Software Engineer to join their team.


About the job

Reporting directly to the Head of Software Development, your responsibility includes:

• Develop and maintain web/mobile applications and microservices.
• Collaborate closely with vendors, business users and project team for
• applications requirement gathering and development.
• Provide user support for key applications.
• Manage IT projects.
• Evaluate and propose suitable alternatives for software architecture, designs and implementations.

Skills and experience required

As a successful applicant, you will have at least 3 years of experience in C# / .net core. Experience to .net core is required for this role.

Candidates with exposure to cloud, devops, Angular, Vue or React will be of added advantage

Whats on offer
This is an excellent opportunity to join an established end user environment with exposure to latest technology.

To apply, It will be great if you could share your CV to [email protected]. Alternatively, you can apply at https://lnkd.in/gxuq4dY5 (EA: 94C3609/ R1219669)

COMPANY DESCRIPTION

About the Company

JERA Global Markets (JERAGM) is a leading utility-backed seaborne energy trader specialising in LNG, coal and freight. A joint venture between majority shareholder JERA Co., Inc. and EDF Trading, JERAGM's shareholders are among the world's major utilities.

JERAGM operates one of the largest energy portfolios in the world which gives it an in-depth understanding of the way local, regional and international energy markets behave. Its in-depth knowledge and market insights enable us to capture trading opportunities, optimise portfolios, create value and enhance security of supply for our customers.

Headquartered in Singapore, JERAGM has a global talent pool of close to 300 people across offices located in four strategic locations: Singapore, Japan (Tokyo), the UK (London) and the US (Houston).

JERAGM is strongly capitalised with over US$500 million in paid up capital and a total equity of US$4 billion. JERAGM has retained its A+ Stable rating from R&I, attributable to a robust business model and solid financial base.

RESPONSIBILITIES

JERA GM is implementing a series of new IT systems to reduce its reliance on its shareholders for IT services and to enable the rapid growth into a global leader in the trading of fossil fuels.

At the core of the system landscape is a set of vendor systems that support critical business activities such as trading, risk management, pricing, and logistics. JERA GM have and will continue to make significant investments building on top of these systems to tailor them to the specific needs of its business. Up until now, this work has been performed by teams of consultants. JERA GM would like to develop an in-house capability, so they can be self-sufficient in the ongoing development on this platform.

This in-house capability needs to be able to extend, customise, configure and integrate these systems to meet the ongoing needs of the business. They will also support the development of new bespoke systems, such as for business intelligence and decision support, to meet needs not provided by the vendor systems.

The Core Platform Software Engineer will:

• Work to obtain excellent business knowledge of the full transaction cycle within a multi-commodity energy trading environment such that they can converse directly with users and other stakeholders with minimal hand-holding from Business Analysts.

• Develop new features on the company's credit system (Cubelogic) and ETRM (Energy Trading and Risk Management) system to support the company's growth (new products, new processes), in a Python/Azure (Databricks & ADF)/C# / SqlServer environment.

• Demonstrate a broad set of technical skills including expert database development and administration, Python/.NET/C# development and Powershell Automation/Devops skills.

• Build new features on the various applications that revolve around the Cubelogic/ETRM (APIs, loaders, reports, BI). It is most important that they have the ability and desire to rapidly pick up a diverse range of technical skills to support challenges as they arise. They will be actively required to work with challenges using technologies such as Azure IaaS/PaaS, Python, Databricks, Power BI.

• Apply their strong software engineering skills to:
  • Improve the ability to integrate vendor systems together.
  • Improve the ability to unit test customisations of vendor systems.
  • Improve the structure the source of such customisations.

• Work with JERA GM IT to evaluate the quality of the existing vendor system customisations and build out a prioritised backlog of improvements. Work to then safely improve the code estate to improve its flexibility and maintainability.

• Support efforts to improve end-to-end test automation and continuous integration across the application estate.

• Have a strong engineering focus and eye for high quality delivery. They will be expected to deliver high quality software and adhere to modern software engineering practices. They must also be driven to automate everything as this is ingrained in the culture of the team.

• Work within a hybrid internal/consultant/vendor team to deliver a backlog of new features, enhancements, bug fixes and integrations to support the ongoing needs of the LNG and Coal trading businesses. Demonstrate a strong ability to self-organise when required.

• Work collaboratively with the rest of the JERA GM technical team, whilst also demonstrating end-to-end ownership of entire problems where required.

• Show a highly proactive attitude in learning and immersing themselves in the vendor platforms with the aim of gaining an expert knowledge of how to develop and support extensions and integrations.

• Be comfortable with agile delivery modes such as Scrum or Kanban but also be flexible to work with whichever delivery approach works best for the problem at hand.

• Provide 3rd line production support.

Skills and Experience required

• 5-10 years of overall experience with advanced level of coding experience in either Python or C# with good knowledge of other.
• Strong experience in SQL, & PowerShell
• Modern cloud-based system architectures and technologies such as Data Lakehouse using Databricks, Azure functions and ADF
• Experience with C# .NET
  • Good understanding of the core language and framework
  • Service oriented development (WCF, Rest API, GraphQL)
  • Data access development (ADO.NET, EF or equivalent such as NHibernate)
• Extensive SQL Server database design and development skills (excellent SQL skills assumed). A good working knowledge of database performance optimisation is also required.
• Familiar with knowledge of Azure services including VNET, Key-Vaults, Azure Data Factory, ADLS Gen2, Virtual Machines, App Services, Storage Accounts and Azure Active Directory
• Orchestrating data pipelines using Azure Data factory
• Strong conceptual understanding of Big Data, Map-Reduce, Spark, file formats such as Parquet, Avro, ORC etc.
• Reporting tools such as Power BI
• Knowledge of JavaScript/UI framework like Angular/React.
• Cloud experience in Azure or AWS
• Experience with Windows Server infrastructure
• Experience working with agile delivery methodologies such as SCRUM or Kanban.
• Experience with Microsoft-based BI stack, including SSIS, SSRS and Power BI is desirable.
• Experience with Azure PaaS and IaaS and corresponding automation toolkits is desirable.
• Experience in Allegro ETRMs is desirable.
• Experience in Cubelogic is desirable.
• Proven work experience in the energy trading, commodities trading or corporate banking sector

• Highly motivated to continually develop skills and techniques to ensure the best tools are used for the job. Support, resources and technical mentoring will be provided by JERA GM as required.

• Highly motivated to deliver results and ‘go the extra mile' to meet deadlines.

• Able to multi-task with minimal supervision and highly structured and organised in the way tasks are approached.

• Excellent communication skills.

• Strong academic background, educated to degree level and/or equivalent professional qualification or relevant business experience.

Provide 1 st and 2nd level support  Technical assistance and support for incoming IT Helpdesk and End User desktop queries and problems.  Laptop/desktop/peripherals hardware and software technical support.  Windows 7/10, Windows server, file/print/scan services, Outlook/Office 2016, Office365 suite, 2FA, LAN\WAN/Wireless network connectivity, VPN, mobile devices, meeting room audio/video conferencing systems, PABX and basic application troubleshooting.  Perform PC/Laptop Refresh, Onboarding and off boarding of users and ensure asset inventory tracking is updated.  Escalate issues to OEM/vendors and follow-up until the resolution of the problem.  Out-Of-Office-Hours On-Call support. 2. Systems administration and maintenance  Provide Wintel server, Active Directory, GPO, WSUS, Software deployment and system administration.  Liaise with external vendors for any related hardware/software maintenance and services.  Perform Installation/Configuration/Monitoring/Patching/Upgrades of desktops, servers, operating systems, antivirus, databases and other system related software.  Participate in disaster recovery testing. 3. IT governance & documentation  Involve in regular review and update of infrastructure policies, procedures and system documentation to ensure compliance.  Plan and conduct end-users training as needed.  Conduct quarterly IT asset counts.

At least 2 years of working experience in IT helpdesk providing 1st level and 2nd level end user desktop support. 2. Strong experience in End user hardware and software technical support, Windows 7/10, Office 365 administration and Active Directory. 3. Good to have networking, storage and some database administration experience. 4. Able to work on a rotating 2nd level Out-Of-Office-Hours support On-Call basis. 5. Knowledge of ITIL operation. 6. Strong analytical skills, ability to work independently and in a team environment. 7. Possesses good attitude, good interpersonal and communication skills. EDUCATION 1. Degree/Diploma in Electronic/Computer Engineering or Computer Studies or equivalent. 2. Good to have ITIL foundation certification. 3. Good to have Microsoft 365 or MCSA certification

• Design and deploy networks, including LAN, WAN, WLAN, and VPN solutions.
• Configure and install hardware such as routers, switches, firewalls, and wireless access points.
• Conduct network modeling and analysis to optimize performance and security.

Skillsets Required (MUST):

1. F5 Load Balancer

2. AWS Load Balancer - Application Load Balancer (ALB) / Network Load Balancer (NLB)

3. Firewall

4. Palo Alto

We are representing our client in the global technology and engineering space to look for Systems Engineer to complement the existing team based in Jurong.

Responsibilities

• System Engineering Design
• Generating Test Plan & Procedures
• Sourcing and Procurement of System Hardware
• Planning and Setting up Test Lab
• Conduct Factory Acceptance Test
• Lead Installation, Checkout, Integration and Testing (ICIT) at customer’s sites
• Perform Troubleshooting and Resolving System Faults
• Perform On-Site Acceptance Test
• Lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

Requirements

• Degree in Electrical & Electronics Engineering / Computer Science or equivalent
• Minimum 2 to 3 years working experience in industry
• Experience and knowledge in Infocomm Technology, RedHat Linux, Virtual Environment, Network Security is preferred
• Computer literate e.g. MS office, Visio
• Excellent Oral and Written Communication Skills
• Excellent Time-management
• Good Learning Capability

Job Description :

• Perform environmental monitoring in various industries such as aerospace, pharmaceutical, chemical industry and etc
• Experience in Compressed Dry Air and Nitrogen Testing
• Day-to-day operations and activities such as noise, water & air sampling, monitoring, and report writing
• Coordination with customers and suppliers

Requirements :

• Degree in Chemical/ Environmental Engineering, Chemistry, or Science-related field
• Minimum 1 year of working experience
• Entry-level candidates are welcome to apply as on-the-job training will be provided
• Must possess Class 3 or equivalent driving license

Work location : 121 Genting Lane, ALS Building, Singapore 349572

Please apply with detailed resume stating current/last drawn and expected salary, and notice period.

ABOUT MONEYTHOR

Moneythor is an award-winning global enterprise software company based in Singapore providing banks and fintech firms world-wide with a modern technology platform to enhance their digital banking services, with a prime focus on the generation of data-driven personalised recommendations and insights for consumers and businesses.

Moneythor is headquartered in Singapore and with presence in London, Paris, Dubai, Tokyo, and Sydney, with further expansion in progress.

OVERVIEW

Are you energised by figuring out elegant solutions to hard problems? Do you love doing great work and always going above and beyond for your clients? Have you been looking for a role where you can stretch and leverage all your skills as part of an amazing team? If yes, then this might be the perfect role for you!

We have an opening for a pro-active and personable Solution Engineer with deep JavaScript, HTML, and Web development experience. This is a client-facing role where you will be the point person for our enterprise clients in the region and help them maximize the value they generate from the Moneythor solution. You will also work closely with our business development, product, and engineering teams to identify potential product enhancements and sales opportunities arising from your client engagements. This is a hybrid role and will work both remotely and out of our client offices based in Singapore.

RESPONSIBILITIES

• Provide strategic, operational and deep technical expertise to execute Moneythor’s Customer Success vision.
• Provide assistance to our digital banking clients and address their ongoing technical & functional questions.
• Act as technical go-to person for our customer success organization
• Leverage your deep HTML, JavaScript, Web development, SQL, and Java skills to customize our clients' implementations.
• Play an evangelist role with our clients on the existing and/or new features of the solution.
• Maximize platform adoption/engagement and drive new business growth through greater advocacy and reference-ability.
• Understand and analyze client business requirements, and help implement, test, package and ensure the timely and accurate solution delivery.
• Partner with business development, product, and engineering teams in pre-sales, onboarding, and client-retention activities.
• Maintain in-depth understanding of our platform and provide vetted, impactful customer feedback to the product team.
• Use a case tracking system to manage information, questions and answers for every client-driven request.
• Identify potential opportunities to extend our relationship with clients and ensure that these are passed on to the appropriate team members.
• Maintain expert professional knowledge about the market and developments in the digital banking industry.
• Respond to service disruptions/incidents as part of our internal incident procedures.
• Ensure accurate and timely completion of all projects and requests.

REQUIREMENTS

• 5+ years of experience working in a CSM/Solution Engineer role, or as a client-facing technical and business analyst with involvement in project implementation, pre-sales and support activities.
• Hands-on technical experience with JavaScript, HTML, Java, SQL, Web and database technologies.
• Excellent written and oral communication skills.
• Ability to work on multiple client accounts in autonomy with little or no management oversight.

The detail plans as described above are as follows:

• Execution formation with the direction by COMPANY’s Site In-charge/ Project Manager.
• Outline of the Construction & sequence of work.
• Temporary facilities plan (If require) and subcontracting Plan.
• Manpower mobilization plan.
• Construction equipment mobilization plan.
• Work closely with the project scheduler on construction schedule and progress reporting.
• Constructability studies and plans, coordinate with Project Engineers and other related discipline as and when necessary.
• Scaffolding plan.
• Reflect the constructability plans in the inquiry for subcontracting.
• Preparation of documents such as specifications, procedures, manuals and etc.
• Erection plan of extra heavy equipment, inclusive of haulage plan.
• HSSE work control plan including rules and promotion plan together with COMPANY’s Site HSSE personnel.
• Coordinate with Project team of vendor specialists for work which need vendor specialist support.

Duties & Responsibilities:

• Initiate the subcontractors sourcing, inquiry package issuing, work scope clarification, sub-contractors evaluation & selection, cost negotiation and PO issuance.
• Work scope clarification & confirmation, BQ verification and construction direct & indirect cost estimation.
• Initiate Project’s Kick off meeting with the selected subcontractor and coordinating with selected subcontractors to ensure they are in line with company or project strategies and planning. Discussing and clarifying the detail of scope of work, execution plan, commercial issue and technical issue to minimize potential future conflict.
• Carry out constructability studies, construction activities planning and execution plan for the job.
• Coordinating with all engineering disciplines to ensure design, cost and client’s requirement can be achieved.
• Handling of issued drawings or field change sheet to ensure latest drawings to be applied.
• Work closely with the team member and subcontractor to prepare all the MSRA required for the project.
• Working closely with scheduler, subcontractors and clients to plan ahead and schedule critical work paths in order to avoid delays or obstructions on mechanical completion.
• Day to day management of the site, including supervising and monitoring the work progress, site labour force and any work of subcontractors.
• Overseeing quality control and health and safety matters on site.
• Maintain knowledge on all contract terms and legal requirements for project to avoid any delay in projects.
• Identify and resolve all technical issues in Construction process.
• Liaising with clients and company project team, including attending regular meeting and submitting reports to keep them informed of progress and construction issues.
• Liaising with any vendors, consultant, supervisors, subcontractors and the general workforce involved in the project.
• Assist the COMPANY’s Site In-charge/ Project Manager to monitor and manage the overall construction cost, including subcontractors’ progress billing, construction expenses and cost of variation order.
• Prepare and submit the weekly and monthly progress/construction reports to management.

Education Qualifications & Other Requirements:

• Degree in Mechanical engineering or equivalent.
• Over 3 years’ relevant experience in construction management field.
• Experience in oil and gas or chemical projects.
• Knowledge in construction planning.
• Knowledge and experience in sub-contracting work.
• Proficient in MS Office, MS Powerpoint and schedule reporting.
• Clear awareness of construction management tools and method of execution.
• Familiar with Construction Practices.

Our client is specialized in the production and distribution of disposable medical devices.

• Handle the automation projects including equipment upgrade, and assembly process productivity initiatives.
• Lead the automation initiatives to ensure the machine design, cycle time, project lead time and cost meet the requirements.
• Work closely with cross functional teams to achieve equipment effectiveness and improve process capability through process enhancement and validation.
• Contribute to continuous improvement projects to minimize operational disruption and achieve productivity savings.

Requirements:

• Degree in Mechanical/Electrical Engineering or equivalent
• At least 5 years of experience in automation and assembly processes from Medical Device/Pharmaceutical industry.
• Strong knowledge on automation machine design and PLC programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Role:

Electrical Project Engineer / Licensed Electrical Worker

• Working Hours: Monday-Friday [ 830am - 530pm ]
• Address: Bukit Batok
• Salary: $3,500-5,000

Requirements:

• Degree in Electrical Engineering (Major in Power)
• Possess Class 3 driving license

Responsibilities:

• Preparation of technical specifications.
• Carry out site inspections on LT and HT installations per EMA requirements.
• Assist PE/ LEW to carry out switching of electrical panels.
• Standby and attend emergency call up services at customer installations.
• Prepare incident reports, technical proposals, etc.
• Site supervision of sub-contractors on maintenance works.

✅ Wee Yuan Huan

✅ Reg No: R21100383

✅ The Supreme HR Advisory Pte Ltd

✅ EA No: 14C7279

Job Description:

• To review customers’ design and documents (CAD data, drawings, specifications, etc.) for better manufacturability and to provide proposals/feedback or seek clarifications from customers.
• Perform process planning, generate part arrangement, Cam editing instructions and production documents for manufacturing processes.
• Liaise with Cam section on generation of soft toolings to support production.
• Liaise with tooling vendors on fabrication of hard toolings.
• Perform initial DFM review prior to confirmation of customer’s design or order.
• Work with Material Planners and Purchasing on the processing and material positioning for the product.
• To monitor and follow-up on production feedback via Engineering Change Request and to take the appropriate actions to implement upon appropriate approval process.
• To handle customer inquires/problem solving matters on engineering related issues.
• To maintain proper documentation and filing of parts tooled or reviewed.
• Support company’s continuous productivity and quality improvements (e.g. panelization utilization improvements, process flow simplification, update department checklist/guides, etc.).
• To conduct technical training to relevant staff as and when necessary.
• Work with Process and Development Engineering Teams on process capabilities, design guidelines and new product developments.
• To carry out any other tasks assigned by superior.

Job Requirements:

• Min Degree/Diploma in Electrical/Electronic/Mechanical Engineering
• Familiar with Cam and In-Plan system (Genesis etc)
• Good communication skills
• Meticulous
• Familiar with Microsoft Office

Our client is a manufacturer of machines that offers automated solutions for the pharmaceutical industry and healthcare facilities.

• Conduct system performance tests, data analysis, and troubleshooting to ensure optimal functionality of mechanical, software, and hardware components.
• Execute validation protocols for automated systems, ensuring compliance with industry standards and regulations.
• Collaborate with cross-functional teams, including design, manufacturing, and quality assurance, to identify validation requirements and methodologies.

Requirements:

• Diploma and above
• At least 2 years of experience in validation engineering, particularly with automated systems.
• Experience with robotics, control systems, or advanced manufacturing technologies.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Our client specializes in power solutions, ensuring the delivery and maintenance of electrical supply.

• Perform technical assistance for different components and systems in power management and backup solutions.
• Liaise with end-users for on-site installation, commission, repair and maintenance.
• Ensure on-site work are carried out in safe manner and comply to safety measures.
• Monitor on maintenance contract to ensure work is carried out timely.

Requirements:

• Diploma in Electrical/Electronics Engineering or equivalent.
• At least 4 years of experience in offering technical support in the UPS/DC Power sector.
• Strong interpersonal, communication and presentation skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Responsibilities

· Provide support to customers’ engineers on the development of Dry Etch process

· Develop new or modified process formulations, defines processing or handling

· equipment requirements and specifications, and reviews processing techniques and

· methods applied in the manufacture, fabrication, and evaluation of products

· Coordinate design requirement review with appropriate engineering/scientific personnel

· to ensure compatibility of processing methods

· Compile and evaluate test data to determine appropriate limits and variables for process

· or material specifications

· Develop and plan projects involving definition and selection of new concepts, equipment

· automation technology, and approaches in the processing or development of new or

· improved processes

· Work closely with cross-functional engineering teams to troubleshoot processes and

· integration problems

·

Requirements

· Degree in Chemical/Materials Science Engineering or its equivalent

· At least 2 years of relevant experience in the development of Dry Etch process

· Experience in Project Management will be an added advantage

· Strong communication and good interpersonal skills

· A meticulous, organized and resourceful team player

· A highly motivated individual who works independently with little supervision

· Work in cleanroom environment

· Willing to work overtime

· Require to be on standby during weekend/public holiday

To apply, please visit to www.gmprecruit.com and search for Job Code: 19185

To find out more about this opportunity, please contact Lionel Liew at [email protected].

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lionel Liew | Registration No: R1330693

Bloomberg Data Technologies Engineering is seeking a strong Software Engineer with experience designing resilient distributed systems, strong implementation skills, and a passion for user experience of a platform.

Bloomberg delivers billions of data points to our customers each day and our clients heavily rely on comprehensive financial information including real-time market data to identify trends and gain data transparency so they can analyze the value of a potential investment, partnership, or acquisition target. In order to make this analysis possible for our clients, the Data Technologies Engineering department is responsible for designing and building large-scale sophisticated infrastructure and data processing pipelines to acquire financial reference information and pricing data from sources around the world (regulatory agencies, exchanges, central banks, buy-side and sell-side firms, website, news, feeds, etc).

We are Data Technologies Orchestration Platform team, and we develop an orchestration platform for the internal users both Engineers and Data Analysts to create a resilient, performant and easy to use data ingestion / analysis pipeline. Our tools are used extensively within the organization with hundreds of thousands of calls and we are in the process of re-architecting to better address the expanding use cases of our system.

We'll trust you to:

• Work with us to design the user-friendly, fault tolerant and scalable Orchestration Platform
• Participate in the full SDLC of various components and systems that make up of the orchestration platform
• Familiarize yourself with the Data Processing / Analysis tasks taken on by the Data Department and systems developed by our sister teams so that we can help more effectively
• Have your antenna up and bring the latest development in OSS into the development

You'll need to have:

• 4+ years experience writing production code in either Python, Rust, Go, JavaScript/TypeScript in a corporate environment
• 4+ years experience building fault-tolerant and horizontally scalable distributed applications / systems dealing with distributed system specific concerns
• Having experience building client facing (internal or external) platform at scale
• Bachelor’s degree or degree-equivalent qualifications in Computer Science (or similar field of study)
• Fluency in both written and spoken English
• Demonstrated continuous career growth within an organisation

We'd love to see:

• Knowledge of Database Systems and trade offs in the distributed systems
• Experience working with distributed queue systems like Apache Pulsar, Kafka, RabbitMQ, ActiveMQ and Database Systems like Cassandra, PostgreSQL etc
• Experience with DataFrame processing systems like Pandas, Polars, Spark, Modin, Ibis and declarative languages on top of it like SQL variants and substrait
• Familiarity with API Designs
• Familiarity with Orchestration Frameworks such as Apache Airflow, Argo Workflows, etc.
• Experience working with and designing systems utilizing AWS

Position Summary:
We are seeking a dedicated and customer-focused Service Desk Agent to provide 1st Level IT Support to users. The role involves managing incidents and queries via phone and remote-control tools, ensuring professional and timely resolutions.

Key Responsibilities:

• Deliver First Call Resolution (FCR) technical support via phone and email, responding promptly to calls and queries.
• Perform initial troubleshooting of reported incidents and escalate unresolved issues to 2nd level support as per guidelines.
• Provide regular updates to customers on the status of their issues, ensuring adherence to Service Level Agreements (SLAs).
• Maintain ownership of reported cases, following up until closure and documenting accurate, complete details.
• Manage customer expectations effectively and notify the Team Lead of any unusual surges in specific types of calls.
• Classify and prioritize incidents, tracking resolution progress and providing follow-up updates.

Ideal Candidate Should Have:

• Strong communication and interpersonal skills.
• A proactive and solution-oriented approach to problem-solving.
• Basic technical knowledge of IT systems and troubleshooting methods.
• The ability to work effectively under pressure and manage multiple priorities.

Our client provides solutions from industries like pharmaceuticals, medical devices, automotive, electrical, industrial, and consumer goods.

• Assemble, troubleshoot, and install stations, ensuring correct pre-alignment and machine performance with support from the Manufacturing Manager.
• Deliver technical training to customers on hardware, pneumatics, setup, and maintenance processes.
• Assist with installations at customer sites and create project documentation.
• Collaborate with Project Engineers to meet deadlines, budgets, and share technical challenges.

Requirements:

• Nitec in Mechanical/Mechatronics engineering
• At least 3 years of experience in the automation or machine building industry.
• Familiar with project documentation and preparing manufacturing documents.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

• Develop test programs for Digital, PMIC, RF & Mixed Signal products on automated test equipment.
• Liaise closely with the design engineers on the first silicon debug, device characterization, test program bring up and production release activities.
• Troubleshoot digital vectors (JTAG/SCAN/ATPG / Functional / Mbist) and Device characterization across PVT (Process, Voltage and Temperature).

Requirements:

• Diploma in Electronics/Electrical/Communication Engineering or equivalent.
• At least 3 years of developing SOC programs from NPI to volume ramp stage experience with Advantest V93k or Teradyne Uflex/Iflex.
• Proficient in Java, C/C++, Visual Basic, Perl, Python

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Responsibilities

• Set and advance sustainability targets, balancing financial and environmental goals.
• Implement effective reporting systems; collaborate on performance benchmarks.
• Lead sustainability communications; create educational materials.
• Formalize sustainability practices through documentation and reviews.
• Monitor and report on sustainability metrics; conduct audits.

Requirements

• Experience in a related field preferred.
• Knowledged of BCA Green Mark for Data Centre and Buildings, ISO 14001 Environment Management System, SS564 Green Data Centre etc

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

POSITION OVERVIEW : Industry Consulting Consultant

POSITION GENERAL DUTIES AND TASKS :

Core Skills:

OS: Unix/Linux platform/Window
DB: MS SQL and Oracle, Postgre database
App server: WebLogic/WebSphere
Middleware: MQ, Kafka, CD/SSH, JBOSS
Programming Language: Java, C++, shell script, PL/SQL

Requirements:

Up to 9 years of IT experience & 5+ Years on Channels and Payment applications in banking/financial services industry. Knowledge on G3 and SWIFTalliance is preferred.

Possess good knowledge on 3 tiers-architecture application to:

Provide L2 support – Be able to understand the application architecture, and interfaces to upstream/downstream.

Support day-to-day IT operations – production issue resolution. Analyse issue raised by users or reported by monitoring system.

Perform impact analysis and suggest workaround solution for service recovery.

Be able to specify the monitoring requirement and observing system abnormality ahead of time to prevent issues from happening.

Be able to conduct application capacity planning and perform performance tuning.

Be able to participate/conduct regular DR simulation/live DR exercise.

Good interpersonal skills and capable to communicate with different work groups within internal IT, BU/Operations and external vendors.

• Working Days: 5 Days A Week (Monday – Friday), 8.30am to 5.30pm
• Office at City Hall, may need to work at site
• Salary: $5000 to $7500

Requirements
Minimum of 5 years of relevant site / building construction experience.

Roles & Responsibilities

• To coordinate with consultants / subcontractors on the shop drawings / samples / method statements and keep all involved parties updated of the latest changes.
• To attend to project / technical meeting and resolve site issues with owner / consultants for the site progress to proceed smoothly.
• To verify the work done on site are in accordance with the approved drawings / specifications / authority’s requirement and ensured that the subcontractor carry out rectification for non-compliance.
• To resolve site issues with consultants / subcontractor / supplier ASAP to minimise delay to the construction progress.
• To ensure that the related documentations are updated and ready for ISO audit.
• To cooperate with the safety department and carry out the assigned duties within the safety framework.
• Assist site management team in project Planning & coordination.
• Plan and schedule work sequences for construction operation.
• Arrange and prepare documents for authorities’ submission for Conquers, RI, TOP etc.
• To study tender / construction drawings, specifications, and contracts to understand project requirements.
• Understanding of critical project criteria related to schedule & productivity.
• Able to provide guidance to new staff / junior staff.

Interested applicants can email your CV to [email protected] or whatsapp to +65 89249206

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580