Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum 10 years QA/QC experiences

· LTA Mrt experiences will be an advantages

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Salary range: SGD $147,000 - $180,000 per annum + RSUs 

We're looking for a Senior Full Stack Engineer to join our APAC (Asia Pacific) Onboarding team based in Singapore.

APAC customers are a strong contributor to the Wise's growth. A big part of this growth comes from new customer acquisitions, so having a fast, convenient and delightful customer onboarding journey is central to this growth. That’s the mission of the APAC Onboarding team, and we’re looking for people who can make this happen. If this sounds like an exciting challenge, we’d love to hear from you!

Here’s how you’ll be contributing to the team

• Design scalable onboarding solutions tailored to diverse APAC markets, reducing redundancies and driving up conversion rates

• Develop robust systems to seamlessly KYC customers without delays, while being compliant

• Implement scalable KYC controls across multiple regulatory markets with minimal friction in the customer journey

• Build and maintain automations and tooling to process customer documents and other sensitive identity data in a scalable and cost-efficient way

• Utilise the observability stack and analytics to identify gaps, and unlock new opportunities for growth and operational excellence.

• Collaborate with various stakeholders throughout Wise, plan roadmaps with your team, and work through challenges to determine scope and realistic delivery

Imagine yourself as part of a dedicated, passionate, and energetic team on a mission to build amazing mobile apps for all Visa Employees to use on their iPhone, iPad, and Apple Watch.  This team is known as the Corporate Mobile Development and is part of the End User Operations organization within Corporate IT.  Our mission is to design, develop, test, and release the most amazing native mobile apps for our employees to use from anywhere and everywhere on their Apple devices.  Developed in Swift 5.x using the Xcode tool, we pride ourselves on frequent releases, understanding user behavior through usage data, collecting, and analyzing crash log data to understand how to make our next release even better while reviewing user feedback to understand what new features our employees would like to see in the future. 

We strive to operate like a flexible startup, always lock step with where Apple is going yet able to pivot quickly as needed to accommodate Visa’s needs.  We develop with the latest Xcode, refactor all code for the latest version of Swift and use the latest SDKs to build our apps to run all iPhones, iPads and Apple Watches that are still supportable while leveraging the latest iPhone innovations. 

You play a very important role for each release.  Your duties will include: 

• Develop feature-rich native iOS applications for iPhones, iPads, Apple Watch. 
• Be part of an agile team participating in the full lifecycle of application development, including  building entire features and maintaining source control management, build processes, testing, and operations 
• Develop Gen Ai Based application 
• Accountable for ensuring all aspects of product development follow compliance and security best practices. 
• Takes feedback from code review and apply changes to meet standards. 

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

Job Description and responsibilities

1. To develop and disseminate the Company's QA manual and control all amendements and revisions.

2. To monitor all quality related activities on the project.

3. To perform all internal and external audits on behalf of the management.

4. To ensure quality requirements are disseminated to workers and sub contractors.

5. To facilitate client quality management meetings.

6. To review quality inspection personnel qualifications and training requirements.

7. To monitor th disposition of all issued non conformance reports.

8. To monitor the progress and effectiveness of the project quality management system and recommend and implement improvements when required.

9. To coordinate all QA / QC activities with the Project Manager.

10. To coordinate all quality related correspondence witht he customer's representatives.

11. To action and close all customer complaints.

12. To control and archive documentation upon the completion of the project.

Who we are

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

About Beca

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.

We are currently recruiting for experienced Executive Engineer (Civil & Structural) to join the Singapore Office in a growing engineering consulting business.

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

In this role, you will be responsible to:

• To work with the Qualified Person (QP) to develop structural scheme for structures and buildings.
• To carry out engineering analysis to assess the stability and load to be sustained by the structures.
• To carry out engineering design in according with Eurocodes or relevant international design codes.
• To prepare submission to authorities for approval of design.
• Provide technical advice to team members/colleagues in supporting or leading role and embrace a culture that values teamwork
• To attend project meetings with Client, Project Manager and Consultants from other disciplines.
• To attend site progress meetings and reply to technical queries.
• To lead junior engineer in delivering design and seek clearance for all relevant parties and authorities
• To conduct supervision & contract administration when required

Key Requirements

• Degree in Civil/Structural Engineering recognised by Professional Engineers Board, Singapore.
• Minimum 5 years of experience with design of multi-storey/high-rise building from a local engineering consulting environment will be an advantage.
• Those registered as Professional Engineer with PEB and/or have more relevant working experience will be considered for senior role.
• Familiarity with codes of practice, relevant regulations and a working knowledge of authority submission and approval procedures.
• Competent user of relevant engineering software.
• Excellent written & spoken communication skills in English.
• Able to interact and work with colleagues and member of other consultants at various levels.
• A team, client and delivery focused working style.

Job Highlights

• Career Advancement
• Medical Allowance
• AWS & Variable Bonus

Why Beca?

We offer a comprehensive career growth and development programme along with a vibrant and supportive team environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for its people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply now with your CV and cover letter online today.

Please include the following information in your resume:

• Education background
• Work experiences
• Reason(s) for leaving
• Current and Expected salary
• Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

• All project Control (Solar project )with Solar Technical Knowledge
• Project planning And handling with Subcontractors
• Well known Autocad Solar Edge Ms Office. Word Documents Photoshop
• Take The Bill Of Qty For Electrical, Aircon.P&S. Solar Panels And Technical Details
• Compilation of tender documentation for submission (M&E Only)
• Preparation For VO Claim & Amend the DWG with All Supporting Documents
• Preparation of Subcontractor's Claim, Enquiry of Quotation, Preparation of quotation comparision
• Sourcing and purchasing of materials and related products needed for Construction
• To do a daily progress report and have the initiative to report to boss without being asked at end of the day
• Arrange the Catalogue Submission For job Running Approval
• Arrange the OMM Drawing & Catalogue Submission
• Purchase knowledge & control the Budget with Value Engineering Knowledge
• Prefer Singaprean or PR

Job Description:

- Plan, organise and execute the quality assurance activities at in-process and final QA process stages

- Prepare acceptance test plans and work instructions for the inspection and test of the first article and series MRO (Maintenance, Repair and Overhaul) units

- Plan and execute acceptance tests for first article and series production units

- Identify special skills and special test equipment that are to be made available or acquire for acceptance of the products

- Identify and evaluate quality problems, relating to the product, process and quality system, to initiate, recommend or provide solutions

- Initiate actions to prevent the occurrence of any non-conformity relating to the product, process and quality system

- Conduct failure investigation, monitor and ensure closure of corrective/preventive action

- To perform inspection of MRO units

Job Requirements:

- Diploma/ Degree in Mechanical Engineering with basic hydraulic knowledge

- Possess Class 3 driving license

- Knowledge of military vehicles or armament will be added advantage

- Willingness to work in workshop environment

Job Description

• Develop detailed designs, layouts, and specifications for piping systems, ensure proper pipe support design based on piping loads, thermal expansion, and seismic considerations.
• Identify appropriate materials, ensure material compliance with project specifications, applicable codes, and standards such as ASME, ANSI, and local regulations.
• Work closely with process, mechanical, civil, and electrical teams to ensure piping systems are integrated seamlessly with other systems
• Coordinate with procurement, construction, and commissioning teams to ensure timely delivery and installation of piping systems
• Prepare piping-related project deliverables including technical drawings, specifications, data sheets, and material take-offs
• Liaise with suppliers for quotation and technical evaluation of quotation. Review and approve piping construction drawings, isometrics, and support drawings
• Lead piping design reviews, coordination meetings, and vendor technical discussions
• Manage piping engineering scope, schedule, and budget, ensuring project milestones are met

Requirements

• Degree in Mechanical / Piping Engineering
• For degree holder, minimum 5 years of experience in piping design and engineering. For Diploma holder, minimum 8 years of experience is required.
• For senior position, candidate must have at least 10 years of experience, including leadership or project management experience.
• Strong expertise in piping materials, piping arrangement, stress analysis, and design of piping systems
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Knowledge of international and local standards (e.g., ASME, ANSI, BS EN, PUB Singapore guidelines)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping engineering software, and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Overall Job Purpose

Responsible for configuring, implementing, and maintaining Project AVEVA Net/AIM and ISM instances. The incumbent will play a pivotal role in Project data capture, verification, and handover.

Core Responsibilities

• Be the Single Point of Contact for all matters related to setting up, maintaining, administering, upgrading, and troubleshooting the AVEVA NET system deployed on all MODEC

• Coordinate with the engineering disciplines assigned to the project and work closely with project management, procurement, HSE, QA/QC, operations, and the construction team. Meet or, where possible, exceed on-time deliverables while maintaining quality and safety in each activity.

• Establish and maintain the creation of a Class Library and define its structure and mapping techniques in ISM.

• Develop efficient data capture, validation, loading and handover work processes to meet Client/Project schedule requirements.

• Establish new project portals that effectively reflect client/project class libraries, data structure, and handover requirements.

• Ongoing Gateway configuration, maintenance, and development of AVEVA NET portals.

• Generation of Query Forms, SSRS and BI reports communicating data discrepancies, omissions, completion trending and status

• Raise the profile of information management and create a data-centric culture via effective portal development and deployment.

• Shall be capable of developing work instructions for users of AVEVA NET.

• Must understand company goals and implement management directives and policies.

• Anticipate potential problems and take preventive actions.

• Support the Product Manager in planning and delivering AVEVA NET solutions on projects.

• Shall train the MODEC users on the AVEVA NET application in projects.

• Interface with all disciplines to clarify/explain AVEVA NET intent and suggest alternatives when

• Contribute to continuous improvement of company work methodology/procedures.

• Conclude all open issues amicably.

Educational Qualification:

Certification(s):

• Training in AVEVA NET administration

Relevant Experience:

a) 5-10 years’ experience applying AVEVA NET in onshore/offshore Oil & Gas areas or FPSO line(s).

b) AVEVA NET/AIM and AVEVA ISM administration and implementation.

c) Be fully proficient in exception handling between the AVEVA system with associated Gateways and the Client system

d) Have extensive knowledge of AVEVA registers gateway interface with Client system

e) Experience in mapping Company data and document structures to Client structures. Have an in-depth understanding of FEED & Detailed Design deliverables, their execution methodology and their interdependencies with one another.

f) Have previous experience in engineering information management.

g) Possess previous experience with AVEVA Net Portal and ISM development and administration skills on Oil & Gas Projects, specifically for Major Capital Projects.

h) Knowledge of Engineering Design software like AVEVA E3D and AVEVA Engineering is a plus.

i) Possesses good working knowledge of the Oil & Gas Industry, including EPCs and owner-operators (preferred but not mandatory).

j) Shows evidence of good organizational skills.

k) Demonstrates ability to take the lead.

l) Good communication skills.

m) Commitment to take responsibility.

• Design, develop, and implement Spark Scala applications and data processing pipelines to process large volumes of structured and unstructured data.
• Integrate Elasticsearch with Spark to enable efficient indexing, querying, and retrieval of data.
• Optimize and tune Spark jobs for performance and scalability, ensuring efficient data processing and indexing in Elasticsearch.
• Collaborate with data engineers, data scientists, and other stakeholders to understand requirements and translate them into technical specifications and solutions.
• Design and deploy data engineering solutions on OpenShift Container Platform (OCP) using containerization and orchestration techniques.
• Optimize data engineering workflows for containerized deployment and efficient resource utilization.
• Collaborate with DevOps teams to streamline deployment processes, implement CI/CD pipelines, and ensure platform stability.
• Monitor and optimize data pipeline performance, troubleshoot issues, and implement necessary enhancements.

• Strong expertise in designing and developing data infrastructure using Hadoop, Spark, and related tools (HDFS, Hive, Ranger, etc)

• Experience with containerization platforms such as OpenShift Container Platform (OCP) and container orchestration using Kubernetes.
• Proficiency in programming languages commonly used in data engineering, such as Spark, Python, Scala, or Java.
• Knowledge of DevOps practices, CI/CD pipelines, and infrastructure automation tools (e.g., Docker, Jenkins, Ansible, BitBucket)
• Experience with Grafana, Prometheus, Splunk will be an added benefit

Responsibilities:

• To manage the Quality Assurance & Quality Control (QA/QC) function so that quality products/services are supplied.
• Liaison with customers, consultants, engineers, inspection bodies and suppliers on matters relating to quality assurance.
• Coordinating with Production/Plant Managers to conduct investigations on quality deficiencies.
• Conduct site visits to ensure that quality of products supplied is within design parameters.
• Co-ordinate all QA/QC operations to ensure that customers are satisfied with the level of products/service provided.
• Co-ordinate with the Sales and Production Departments to ensure that customer complaints are professionally and efficiently resolved.
• Develop QA/QC systems and set achievable targets
• Ensure Production comply with quality procedures.
• Assist Project Management team on project/safety for daily activities and Quality Management
• Work with Production Manager and Plant Manager to minimize defects
• Comply with all requirements for the continuity of ISO certifications

Requirement:

• Relevant Qualifications in Engineering or equivalent
• possess training certificate in ISO Quality Management System, Quality Engineer, CONQUAS, BCA-Good Industry Practices would be advantageous
• Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity
• Strong communication and interpersonal ability, coupled with influencing skills
• Independent and a self-starter, with strong personal drive to initiate and implement

Job Description

• Liaise with respective functions to prepare project planning and progress report as and when required by authorities or clients and consultants.
• Ensuring projects meet agreed specifications, budgets or timescales
• Supervision of sub-contractors’ project execution processes.
• Attend technical meeting with authorities and consultants
• Ensure safe work procedures are implemented to control risk
• Familiar with relevant legal requirement
• Other duties as and when assigned

REQUIREMENT:

• Candidate must possess at least a Bachelor's Degree in Civil Engineering or equivalent.
• Required skill(s): MS Office, MS Project, AutoCad.
• Ability to work independently with minimum supervision and to meet tight deadlines
• Good team player

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities:

• Create, review, administer and update (monitor & track) construction schedule for project
• Collaborate with other disciplines to collate/provide scheduling data — subcontract change requests, bid comparisons, new work item estimates and resolution of potential schedule/work problems
• Interface and work closely with project team and sub-contractors to ensure required progress
• Liaise with managers and engineers to discuss the progress of the project and address any issues that may arise
• Liaise with external contractors and suppliers to organize the phases of the construction development and scheduling
• Prepare cost estimations and detailed man-hour calculations
• Monitor and track/record work delay/progress and prepare scheduling reports
• Analyze gaps between the planned and actual progress and highlight the areas of concern to project management
• Prepare Project site daily, weekly, and monthly reports and project schedules
• Prepare cost estimation for any additional works and variation order
• Prepare Project site minutes of meeting (MOM) for the current progress meeting and other site meetings
• Any other duties to be assigned from time to time

Pre-requisites:

• Diploma/ Degree in Mechanical Engineering
• Minimum 3 years of experience in a similar role for power plant / industrial plant projects
• Proficient in Primavera P6 and/or MS project
• Candidates with experience in power plant projects will have an added advantage
• Independent and able to communicate effectively at all levels with other disciplines
• Good time management and planning
• Good organizational skills and methodological approach
• Strong attention to details
• Willing to work under pressure and in construction site conditions

About No deviation

At No deviation, we are dedicated to delivering patient-centric solutions that revolutionize the pharmaceutical landscape. As a dynamic expert in engineering consultancy, Commissioning Qualification Validation (CQV), and Quality, Compliance, and Regulatory services, we are looking for individuals who are excited to contribute to impactful projects and drive innovation.

We believe that great things happen when Empathy, Integrity, and Transparency guide our actions. That's why we foster a culture of collaboration, inclusion, and continuous development – empowering our team members to grow personally and professionally.

Position Overview

We are looking for a highly motivated and skilled Project Engineer to execute site engineering projects. This role involves managing both process and non-process-related projects, such as Technology Transfer/New Product Introductions and Capital Projects (typically <$5M). The successful candidate will ensure these projects meet safety, quality, and technical requirements while maintaining alignment with corporate and site standards.

Key Responsibilities

• Collaborate with cross-functional teams (e.g., manufacturing, facilities, engineering, process development, and quality assurance) to successfully implement engineering projects.
• Oversee all phases of project execution, including initiation, change control, design coordination, procurement, construction, commissioning, qualification, and close-out activities.
• Ensure projects comply with corporate and site engineering standards, including Environmental Health & Safety (EHS) requirements.
• Lead safety initiatives such as pre-job safety briefings, permit management, contractor risk assessments (e.g., JHAs), and HAZOP reviews.
• Act as the technical lead for site capital projects, providing oversight of design, vendor, and contractor submissions.
• Partner with document controllers to ensure timely updates and compliance with document management SOPs.
• Support document archiving in the Amgen document management system.
• Utilize critical thinking to troubleshoot and solve complex issues efficiently.
• Leverage tools such as MS Project, SharePoint, Smartsheet, and Excel for project tracking and management.
• Represent project milestones and updates in daily cross-functional meetings.
• Manage all aspects of projects, including planning, budgeting, scheduling, risk management, resource allocation, and post-project follow-up.
• Identify and address high-priority risks proactively during project execution.
• Collaborate with external stakeholders such as engineering firms, construction management teams, and vendors to ensure seamless project delivery.
• Build strong relationships with internal and external partners to foster a collaborative working environment.
• Execute multiple projects simultaneously in a dynamic, fast-paced setting while maintaining high-quality outcomes.
• Demonstrate learning agility and technical leadership by breaking down complex challenges into actionable plans.

Required Qualifications

• Master’s degree with 3 years of experience in Engineering or Project Management.
• Bachelor’s degree with 5 years of experience in Engineering or Project Management.
• Engineering background with expertise in cGMP manufacturing and utilities projects for Biotech/API plants.
• In-depth knowledge of biotech/API manufacturing processes and supporting functions.
• Certifications in Project Management and Safety (e.g., WAH Manager).
• Proficiency in commissioning and qualification of GMP equipment and automation systems.
• Familiarity with regulatory environments (e.g., cGMP, OSHA, EPA).
• Excellent communication and facilitation skills to build consensus among stakeholders.

Why join us?

• Generous Leave Policy including 3 days to care for aging family members, reflecting our commitment to family wellbeing.
• Comprehensive Health & Wellness Coverage: Receive robust medical and dental coverage to support your health needs.
• Professional Development Opportunities: Access continuous learning programs and resources for career growth within the company.
• Inclusive Culture: Work in an environment where innovation, collaboration, and diverse perspectives are encouraged and celebrated.
• Shape the Future: Make a real difference in the pharmaceutical industry while advancing your career.

How to apply

Are you ready to play a key role in shaping the future of pharmaceutical solutions? If you're passionate about making an impact, we want you on our team!

Please submit your resume, outlining your qualifications and experience relevant to the role, here.

Job Description

1. Perform hands-on Marine/ Electrical / Mechanical / Chemical / ervice & Maintenance and Repairs of Equipment / Instruments on outdoor field, canal, undergound, confine space, underwater, marine coastal

2. Involves working onboard vessel /work boat, canal, underground, river and field sites

3. Involve in integration of instrument / computer devices, programming, setup, configuration, testing and commissioning of remote access and control application.

4. Involve in instrument calibration, knowledge in chemical reagent

5. Planning maintenance schedule and product service report / analysis report / Maintenance Report

6. Involve in Ad-Hoc assignments as and when required

7. Willingness for Standby duties or work after office hour or during weekend and Public Holiday

Requirement:

1. Possess positive attitude to learn, has initiative and independent

2. Relevant educational qualifications in Marine/ Electrical / Mechanical / Structure Engineering (Degree/Diploma)

3. Willing to do field work (outdoor sites, onboard vessel /workboat, underground, canal, water coastal, etc.)

4. Team player

5. No prior experience may also be considered.

6. Confident in Marine Environment

7. Self-driven and motivated individual with critical thinking skill

Interested applicants, please email detail resume to [email protected]

Regret to inform only shortlisted candidates will be notified

OMS has built a long-standing commitment to the upstream energy industry as we manufacture and distribute products from facilities and business units around the world. We are an equal opportunity employer and process all employment applications following the relevant regulations in the countries we operate in.

We are now looking for a Product Design Engineer, with strong background in Mechanical Engineering to join the Engineering Team. The individual is responsible to prepare and generate detailed engineering work instructions and procedural specifications, provide technical support to sales function, guide and supervise junior product engineers for day to day work order preparation and perform other assigned duties as and when required. Work scope covers all OMS locations across the region.

Individuals with relevant product design experience in Conductor/Pipe Connectors, Wellhead Systems, Valves, Actuators, Choke, and/or Downhole Systems will be highly considered for this role.

Job Descriptions:

* Familiar with analytical systems such as O2, Ammonia, pH, TOC, TRC, Conductivity and etc Analyzer, and instruments (PIT, TIT, FIT, etc)

* Coordinate with internal team, vendors, and contractors to ensure smooth project execution.

* Supervise and lead Installation and Commissioning and initial calibration of various Analyzer, instruments, sensors, etc. Troubleshoot and resolve any technical issues that arise during installation and commissioning.

* Perform Electrical & Pressure Tests, Factory Acceptance Test (FAT), Site Acceptance Tests (SAT)

* Perform site commissioning for instrumentation & Control System, analytical systems and project-related jobs

* Carry out preventive maintenance and corrective maintenance of analytics systems services

* Ensure all documentation is accurate and up-to-date, technical documents, not limited to installation report, testing and commissioning report, etc

* Ensure all installations & commissioning meet customer specifications and industry standards.

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Degree in Engineering (Mechanical, Environmental, Science, Electronics/Electrical Engineering or equivalent qualification)

* Strong analytical & troubleshooting skills

* Preferably 3 - 5 years of working experience or more in the analytical instruments or related field.

* Knowledge of analyzers, instrumentation would be advantageous.

* Able to work independently and write effective good service report

* Good work experience with Hart communicator, calibration, and PLC/SCADA would be advantageous

* Good planning and time management skills to achieve job efficiency.

* Customer orientated with a positive attitude

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Job Description

* Perform software development and/or Cloud / Virtual / Computer programming with Systems Development Life Cycle (SDLC) methodology

* Implemenmt Cloud Management, Cloud programming, Enterprise Server / Network / Cybersecurity Architecture and databases.

* Develop technical specifications, design, coding, data security, implementation, integration, support, documentation and user guide.

* Experience in Data Analysis and Data Integration

* Handle Design and deliver end-user training and training materials

* Install, configure, troubleshoot and administration of Cybersecurity / System infrastructure/ networking / Windows servers / Disk storage / Cloud Management.

* Provide technical support and management for Server and / or Cloud Application

* Integration & Engineering services

Job Requirements:

* Diploma or Degree in Computer Science, IT or Computer Engineering

* 1-2 Years of similar working experience, Fresh graduate are welcome

* Hands on experience in developing full stack applications in Cloud Computing (AWS, Azure, etc), Cloud Management, Web Application, Computer Application, Process Control Application using, JAVA, NoteJS, Python, etc

* Good technical skills in Database Design, Windows Server, Cloud Application Management;

* Cybersecurity Infrastructure / Networking / firewall implementation and experieice

* Possess positive attitude to learn, has initiative and independent

* Strong analytical skills and able to work under tight timelines

* Strong team player with excellent interpersonal and communication skills, and the ability to work independently Pro-active and able to work in a fast pace environment and handle multiple tasks when required

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Job Description:

- Conduct product development activities, such as product system & sub-system design and integration, technical evaluation, prototype preparation / testing, test analysis and system qualification.

- Review specifications and technical requirements with clients.

- Generate product technical documents, drawings, assembly drawings and bill-of-materials.

- Provide technical support to manufacturing, quality and marketing department.

- Work effectively in a multiple department project team to ensure that project schedule, budget and quality are met.

Job Requirements:

- Degree in Mechanical Engineering.

- Knowledge in 3D modeling software such as Solidworks is an advantage.

- Able to work hands-on and manage project deliverables individually.

- An effective team play.

- Excellent problem solving skills.

Job Description

• Manage the company’s projects
• Coordinate between client, company, factory and work site staff
• Work on ensuring good quality and maintain delivery schedules
• Liaise with QA/QC for the third party/client inspections, class survey certification, etc

Requirements

• Degree in structural / marine / naval architecture / civil / mechanical engineering
• Min 2 years of working experience in similar industry
• Good written and spoken English
• Experience in quality assurance and project management, preferably in the construction, marine, or offshore industry
• Leadership qualities expected
• Able to plan and manage project independently
• Come and convince us why you are the best person for the job

Job Responsibilities:

- Perform basic and advanced machine electrical wiring works

- Develop electrical testing jigs and perform testing and validation of machines

- Lead the production team to strictly adhere to production schedule and same time improving the manufacturing process to improve quality, cost, and productivity.

- Creates, implements, and monitors KPI indicators on product quality and section capability

- Provide shop floor feedback to Production Engineering and D&D Department

- Assist the Production Manager to provide quality, cost effective and efficient support for launching of new machine models

- Perform machine pre & post machine power ON inspection checks, machine parameter settings, testing and inspection according to standard

- Able to troubleshoot and resolve machine electrical non conformance

- Perform machine final electrical inspection and adjustments for any defects to maintain high level of quality

- Prepare reports on productivity, quality, claims, etc

- Work with engineering and other departments to improve assembly processes

- Monitor the serviceability of measuring electrical instruments or jigs and fixtures and reporting to Supervisor or Manager any non-compliance condition

- Maintain accurate records of inspection result at each electrical process

Job Requirements:

- Minimum Diploma or equivalent in Electrical required

- 2-3 years working in a machine assembly environment

- A good track record of supporting the department achieving KPI

- Strong understanding of 5S and HSE knowledge

- Able to work effectively in a fast and ever-changing stressful environment

- Maintain good Quality standards, 5S and safety discipline

- Well verse in Microsoft office (Excel, Words, Powerpoint and Outlook)

- Knowledge of drawing software(Solidworks, Unigraphic, etc) is added advantage

Job Description

- Work with Production Engineers, Supervisors and Technician to design, develop, and improve engineering processes.

- Planning and coordinating of production schedule and production output.

- Plan and implement improvement projects for productivity improvement

- Ensuring all monthly operating expenses stay within allocated budget.

- Support inspections of equipment and scheduling maintenance or repairs with Maintenance Dept

- Inspecting inventory and reporting inconsistencies as well as ordering more materials.

- Producing CAD drawings, nesting thru company smart system according to our standard specifications.

- Evaluating first article and processes and ensuring standardization of quality assurance measures.

- Calibrating and troubleshooting of equipment /machines as required.

- Perform time study and improve standard time hour

Job Requirements:

- A degree or minimum diploma in Engineering discipline.

- Minimum 2 years' experience in precision engineering in manufacturing industry

- Proficient in 3D drawing software – Solidworks

- Proficient in Microsoft Office

- Familiar with manufacturing quality assurance techniques

- Understand 5S discipline, TQC and other quality improvement tools

- Good interpersonal skills, problem-solving and project management skills

Responsibilities:

• Responsible to contribute to product cost savings through identifying opportunities for cost savings & build value engineering project pipeline
• Develop methodologies, templates and approach for target costs based on product analysis data
• Analyze and evaluate design for materials, manufacturing process & supply chain for value analysis / value engineering opportunities
• Execute & drive VAVE projects starting from Idea generation to implementation
• Co-ordinate with Global & local stake holders including suppliers for project execution including samples, prototypes and testing requirements
• Build active VAVE project funnel and build active VAVE project funnel and todDrive multiple VAVE projects in a timely manner to support business goal target
• Establish and update processes for execution on teardown, benchmarking and VAVE requests

Requirements:

• At least 5 years of working experience in the EMS or an MNC environment
• Strong analysis skills, knowledge in material pricing and strategy
• Strong knowledge in Mechanical/Electro-Mechanical/Electronics commodities

Interested candidates are to submit a detailed resume to speed up the application process.

We regret to inform that only shortlisted candidates will be notified.

Thank you for applying.

Meranti Power Pte Ltd, a fully owned subsidiary of Energy Market Authority, is currently in the final phase of power generating station development. and will thereafter, operate and maintain the power generating station. We are inviting applicants for the position of Senior Engineer, Electrical who shall report to the Head, Electrical. The scope and requirements are as follows:

RESPONSIBILITIES :

A. Current & future Project

• Ensure compliance to the prevailing Workplace Safety and Health Act and all relevant authorities’ regulations.
• Assist the Project Director and Head (Electrical) in all phases of Project Cycle related to all electrical systems and equipment including conceptual stage, drafting work scope for Owner’s Engineer consultant, system design and engineering stage, execution stage and right up to commissioning.
• Work with the Consultants for the timely completion and cost-effective implementation of the projects.
• Participate in the design review, implementation & commissioning of new power plants’ Electrical systems, including evaluation and recommendations for acceptance of the Consultants/Contractors’ Electrical systems engineering design and selection, procurement, and installation proposals for the power plant to ensure successful commissioning on time & within budget.
• Detect and provide prompt triggering of risks or potential risks to avoid/minimize delays or losses, recommend cost effective plans and monitor finances to ensure each phase of Electrical system works is started and completed on time and within the budget allotted.
• Attend meetings with various stakeholder to report on project progress against milestones and challenges faced
• Manage problems resolution processes with Head (Electrical) and consultants with respect to power plant project Electrical systems design, implementation, installation, and commissioning and resolve co-ordination/interfacing issues with other parties.
• Provide status updates to Head (Electrical) for report to MP’s Senior Management on progress of major Electrical systems project activity against the schedule, highlighting significant milestones and any issues/interfacing affecting or may affect project cost and schedule.
• Support Head (Electrical) to communicate, coordinate and collaborate with Contractor, external parties and agencies (SPPG, EMA/ PSO, JTC, etc) with regards to Meranti Power’s 400kV Switchhouse/ Substation, SPPG feeder connections, Gas Insulated Switchgears, Generator Step-up Transformer, Insulated Phase Bus Duct, etc. at different stages of the project (including Commissioning).

B. Operation & Maintenance Phase

• Be familiar with all regulations pertaining to the Electrical systems of the power station’s equipment, auxiliaries and common systems maintenance works and safety, e.g. Workplace, Safety & Health Act’s Regulations, including Risk Assessment and Mitigating Measures, Work Methods, Permit-to Work, Lock-Out-Tag-Out System in relation to maintenance of Electrical equipment in the power generation station.
• Prepare technical specifications for equipment electrical parts and work services when required. Work with Procurement to manage the procurement of Electrical parts and services.
• Coordinate all Electrical Maintenance programmes (Predictive, Preventive, Corrective) and liaising with relevant stakeholders to ensure safe and timely completion of works.
• Be familiar with Predictive Maintenance monitoring techniques.
• Familiar with use of Computerised Maintenance Management System (CMMS).
• Manage and optimize all planned plant/equipment electrical maintenance activities during minor and major overhauls and inspections
• Responsible for the functional tests and analyse the failures related to Electrical systems and components and recommends remedial/mitigation measures to prevent recurrence. Troubleshooting of faults/defects & carry out failure analysis to determine root cause.
• Study, evaluate and implement plant improvement projects to enhance overall plant reliability, availability and performance
• Supervision of Electrical maintenance contract works and prepare work procedures and risk assessment for all Electrical maintenance activities
• Manage day-to-day activities of Electrical team effectively; may be appointed as Reporting Officer to technical officers.
• Support Head (Electrical) to engage and manage Licensed Electrical Worker (LEW), Qualified Persons (QP), Competent Persons (CP) to carry out the required services and works.
• Track the year-to-date expenditure against the approved department Electrical budget; Support Head (Electrical) to prepare upcoming budgets.
• Prepare Department’s Electrical monthly report
• Design, coordinate and conduct training on Electrical matters

C. Other tasks

• Perform administrative tasks for the benefit of the organization as instructed by Head (Electrical) or Senior management e.g. secretariat for meetings, staffing duties, presentations, etc.
• Take part in organisation-wide activities in various capacities such as organising committees for events,
• Attend training/ events/ conferences that is in line with the organisation objectives and proceed to share the learning points for organisation benefit

REQUIREMENTS :

• Degree in Electrical Engineering or equivalent.
• Major Project Management experience with at least 3 years in power plants development, implementation, commissioning tests, preferably including operation/electrical maintenance of large power plants, specifically employing Combined Cycle Technology.
• Conversant with international and local codes, standards and recommended practices for design and selection of electrical equipment related to the above plants will be an added advantage.
• Hands-on experience in power plant projects’ tender preparation including technical/functional and commissioning tests specifications for C&I equipment, tender evaluations, contract negotiations, contract administration and contract supervision.
• Experience in overseeing the power plants worksite’s adherence to Workplace Safety & Health, and relevant regulatory requirements.
• Will be required to work beyond office hours in event of plant exigency or emergency.
• Self-motivated, results focused and willing to work under tight schedules with multi-disciplinary teams.
• Able to lead a technical team and harness and direct the strengths of the different members to output greater effect than the sum of each individual. ·
• Willing to work in construction site office during construction stage and Jurong Island. (Morning transportation pick-up points available at different parts of Singapore.)

Only shortlisted candidates will be notified.

By submitting your personal data and/or resume to Meranti Power Pte. Ltd. (“MP”), you shall be deemed to have given your consent to MP for collecting, using, and disclosing your personal data for the purpose of assessing your job application.

Addcel has been delivering deep value to clients across Semi-con, Pharmaceutical, Data Centers & Oil & Gas industries since 2010.

Specialising in Design & Build of process utility systems, prefabrication/ DFMA, facility & plant maintenance and construction implementation, we take pride and passion in all that we do.

The Process Engineer reports to the Tender Manager and is responsible for the below:

• Design and develop industrial processes to improve efficiency and safety.
• Perform calculations for flow rates, pump sizing, temperature, and pressure.
• Develop and review process design documents and specifications.
• Utilize process simulation software to model and optimize processes.
• Collaborate with cross-functional teams, including operations, maintenance, and project management.
• Provide technical support and troubleshooting for process-related issues.
• Ensure compliance with industry standards and regulations.
• Conduct risk assessments and implement safety measures.

To be a good fit, you would possess these qualities and skills

• Bachelor’s degree in Chemical Engineering, Mechanical Engineering, or a related field.
• Min. 3 - 5 years of relevant working experience, preferably in Semi-con, Data-centre, Pharma & Oil & Gas.
• Strong knowledge of process design principles and methodologies.
• Experience in the oil & gas, chemical, or manufacturing industries.
• Experience in extracting BOQ from layout and P&ID drawings for tender preparation.
• Experience in attending technical clarification meetings and presentation
• Familiarity with Distributed Control Systems (DCS) and instrumentation.
• Strong knowledge of process utilities design (Chilled Water, Steam, Process Cooling Water, and CDA systems).
• Proficient in pipe sizing, stress analysis, pump head, and hydraulic calculations.
• Familiarity with proposal costing and tendering processes in EPC projects.
• Strong communication skills with the ability to propose alternative technical solutions.
• Detail-oriented and proficient in Excel.
• Excellent problem-solving and analytical skills.
• Strong communication and interpersonal skills.
• Ability to work effectively in a team environment.