ACMV Design/Site Engineer - Job Description

1. System Design: Create and optimise air-conditioning and mechanical ventilation systems, including load calculations and equipment selection.

2. Site Supervision: Oversee the installation, testing, and commissioning of ACMV systems on-site to ensure they meet design specifications and quality standards.

3. Technical Support: Provide on-site troubleshooting and technical guidance during construction, resolving any issues related to HVAC systems.

4. Regulatory Compliance: Ensure all designs and installations adhere to local and international codes and standards (e.g., ASHRAE,Green Mark).

5. Project Coordination: Collaborate with architects, contractors, and other stakeholders to ensure seamless integration of ACMV systems into the overall building design.

6. Client Communication: Interface with clients to address their needs, provide updates, and ensure satisfaction throughout the project lifecycle.

7. Minimum Requirements: Bachelor's degree in Mechanical Engineering, 3-5 years of experience in HVAC design and site supervision, proficiency in design and project management tools, and strong problem-solving skills.

ACMV Engineer Minimum Requirements

1. Education: Bachelor’s degree in Mechanical Engineering or related field; a diploma with extensive experience may be considered.

2. Professional Accreditation: Registration with the Professional Engineers Board (PEB) Singapore; Green Mark Accredited Professional (GMAP) is advantageous.

3. Experience: 3-5 years of relevant experience in HVAC or ACMV design, preferably within Singapore.

4. Technical Skills: Proficiency in HVAC design software (e.g., AutoCAD, Revit MEP); strong understanding of Singapore's SS 553, SS 530, and SS 531 standards.

5. Regulatory Compliance: Knowledge of local building codes, fire safety regulations, and BCA standards, including Green Mark Certification requirements.

6. Soft Skills: Strong communication, problem-solving, and project management abilities.

7. Continuing Education: Commitment to Continuous Professional Development (CPD) as required by professional bodies like IES or PEB

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Description:-

1. Responsible for all aspects of drafting electrical and structural drawing of switchboard & control panels for marine and industrial use, incorporating the company's key circuit breaker products.

2. Based on abundant practical experience and extensive knowledge on circuit breakers, produce high class switchboard and control panels drawing according to company’s standard.

3. Manage and lead the project for timely and accurate production of software engineering, electrical drawing and structural drawing.

4. Based on software management skill and rich experience of programming language and software development tools, construct software for control system.

5. By communicating closely with the clients both in Singapore and Japan, responsible for accurately understanding their needs and make sure that the products delivered are perfectly designed to meet their demand.

6. During the periodic inspection of products after delivery, responsible for supervising the on-site inspection to ensure that it is carried out correctly.

7. Take the lead of investigation to solve the issue rapidly in case of any software or system issues, by closely liaising with HQ in Japan.

8. Based on the extensive knowledge of switchboard, circuit breakers and software for railway, marine, cogeneration system, power plant and biomass plant projects, liaise closely with engineers’ team in Japan HQ and clients in Singapore to ensure solutions.

Job Requirement:-

1. More than ten (10) years of experience as software and electrical design engineer in electric power system industry.

2. More than ten (10) years of experience in drawing electrical circuit and outline drawing of switchboard using AUTOCAD.

3. More than five (5) years of experience in using software programming tools for power management system in industrial cogeneration system, specifically with PLC (Omron, Fuji, Mitsubishi, Schneider product etc.).

4. More than five (5) years of experience in communicating with clients as software and/or electrical design engineer, explaining technical details to clients in an easy-to-understand manner.

5. Understand “TERASAKI” products that include circuit breaker, marine and industrial switchboard.

6. Certified as a power generation equipment specialist or equivalent and more than five (5) years of practical experience in power generation of switchboard & control products.

Skills Required:-

・Problem-solving skills in challenging and complex situations

・Project management skills from concept, prototype to implementation

・Excellent communication skill to explain technical matters to clients

・Conversant with Autocad, Software for PLC (Omron, Fuji, Mitsubishi, Schneider product).

・Certificate of 1st grade Electrical drafting specialist or equivalent

・Certificate of power generation equipment specialist

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Responsibilities:

• Attends and records the daily quality assurance related inspections for mechanical and HVAC installations
• Coordinates with other production departments, clients, and surveyors for Inspection & testing requirements
• Assigns the systems to be tested to the various supervisors and technicians involved in the operation
• Ensures that the Quality work processes to enhance efficiency and productivity
• Reports on non-conformance and issue Improvement notes, where necessary
• Ensures timely completion of project
• Ensures that all standard operating procedures comply with specifications, quality standards, statutory and regulatory requirements
• Any other assigned duties and responsibilities

Requirements:

• Degree in Marine and Offshore / Mechanical Engineering
• Minimum 5-10 years’ experience with 3 years in marine construction and installations
• Must have ASME PCC-1
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Admiralty Yard

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Summary:

• As a Service Engineer, you will play a critical role in maintaining the operational efficiency of our equipment.
• Your expertise will ensure that our services remain top-notch, directly impacting our client satisfaction and operational success.

Key Responsibilities:

• Conduct periodic inspections, repair, service and maintenance of Musasino equipment to ensure reliable operation.
• Collaborate with clients and superintendents to deliver quality services efficiently.
• Generate reports and present findings to relevant personnel.
• Provide remote troubleshooting support through emails, ensuring customer issues are resolved promptly to maintain high satisfaction levels.

Job Requirements:

• Fresher or related marine engineer experience are welcome.
• A minimum of a Diploma in Engineering (Electrical, Electronics, Mechanical, Mechatronics) or equivalent educational background.
• Ability to work overtime and weekends when required.
• Willingness to travel overseas for an assignment as required.
• Ability to work independently and under pressure, delivering quality results within tight schedules.
• Team player.

Highlights:

• Gross Salary: S$3000 to S$4000/ month
• Working Day: 5 days
• Working Hour: 8am to 5pm
• Overtime paid when working outside of working hours (include Weekend/ Public Holiday)
• Dental and Medical Benefits
• AWS

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for ACMV system installation and troubleshooting on site
• Prepare material requisition for all ACMV equipment and materials
• Prepare work programme for ACMV works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with ACMV suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for ACMV system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling ACMV works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Nitec, Diploma in IT/Computing or Bachelor Degree related certification and above

minimum 1-year working experience in IT

Looking for a long-term career in an IT environment

Must have a passion for IT technology

Preparation of IT documentation, reports, and IT administrative tasks

Good at conducting research

5.5 workday (Mon - Fri 9am to 6pm, Sat 9am - 1pm)

Weekend (Public Holiday Standby)

Short courses will be provided

* No experience or fresh Grad are welcome too.

WAGO Group is an international, standard-setting supplier of electrical interconnection, automation, and electronic interface products and solutions. This family-run company is the world market leader in spring pressure connection technology. Whether in industrial, railway, or energy technologies, in the marine and offshore sectors, or building and lighting management, WAGO products and solutions provide safety and efficiency.

WAGO has been represented in Singapore with a wholly owned subsidiary for over 25 years and has a well-established local infrastructure.

WAGO started setting up an R&D Competence Center in Singapore in 2023 to better cope with the rising global market demand. The new R&D Competence Center operates within the already existing infrastructure in Singapore.

The new R&D Competence Center in Singapore focuses on the business areas of sensor technology and power electronics, which serve the industry, energy, building, and green mobility sectors.

We are looking for someone who enjoys and has experience in the mechanical design of industrial electronic products.

Roles & Responsibilities

• Responsible for planning, conceptualizing, and creating mechanical designs for electronics and power electronics products.
• Create and review technical drawings, plans, and specifications using Siemens NX.
• Collaborate with multi-disciplinary engineering teams to complete design for manufacturing (DFM) and design for assembly (DFA).
• Work with vendors and contractors efficiently to ensure timely completion of deliverables.
• Conduct thermal simulation and analysis using industrial software for development.
• Generate working prototypes for beta testing and customer demonstration, including 3D printing.
• Develop prototype testing processes, and perform testing and verification of new designs.
• Perform detailed documentation to track project development and design process.
• Manage BOM creation and maintenance within the PLM (Product Lifecycle Management) system.
• Ensure the project timeline is met and the project stays within budget.

Qualifications & Competences

• Bachelor's degree in mechanical engineering, or related technical discipline.
• Minimum of 5 years of relevant work experience.
• Sound knowledge of GD&T (Geometric dimensioning and tolerancing)
• Extensive experience using CAD software such as Siemens NX, Creo, or similar.
• Familiar with state-of-the-art 3D printing technology for prototyping purpose.
• Experience and knowledge of Industrial Design (ID) would be an advantage.
• Knowledge of FEA (Finite Element Analysis) would be an advantage.
• Knowledge and experience with special plastic molding techniques, especially overmolding or ultrasonic welding, would be an advantage.
• Ability to communicate effectively and clearly.
• Self-motivated and a great team player.

What can we offer:

• Exciting and diversified duties and responsibilities await you within a dynamic, international company environment that is experiencing sustainable growth.
• We provide you with a platform where you can further develop your passion and technical competence and onboard an exciting industry, and market-oriented career.
• We offer you an attractive, performance-related payment package. We focus on an efficient, process-oriented organization, where the individual responsibility and self-organization of our employees as ‘entrepreneurs within the company’ are particularly advanced.
• The company is one of the globally leading players in the connection and automation technology space offering to its customers innovative high-tech solutions.

WAGO Group is an international, standard-setting supplier of electrical interconnection, automation, and electronic interface products and solutions. This family-run company is the world market leader in spring pressure connection technology. Whether in industrial, railway, or energy technologies, in the marine and offshore sectors, or building and lighting management, WAGO products and solutions provide safety and efficiency.

WAGO has been represented in Singapore with a wholly owned subsidiary for over 25 years and has a well-established local infrastructure.

WAGO started setting up an R&D Competence Center in Singapore in 2023 to better cope with the rising global market demand. The new R&D Competence Center operates within the already existing infrastructure in Singapore.

The new R&D Competence Center in Singapore focuses on the business areas of sensor technology and power electronics, which serve the industry, energy, building, and green mobility sectors.

We are looking for someone who enjoys and has experience in the PCB layout design of industrial electronic products.

Roles & Responsibilities

• Support hardware developers on board schematic capture fulfilling design requirements.
• Responsibility for PCB layout in Cadence Allegro.
• Manage the layout design review prior to design release.
• Prepare and release all PCB documentation, and ensure the project timeline is met.
• CAD library administration including symbol, footprint generation and database administration.
• Creation of components’ and PCBAs’ 3D models and liaising with Mechanical Design Engineers on design constraints.
• Liaise with PCB manufacturers to clarify design requirements and resolve problem encountered.
• Liaise with Process Engineers of the product factory to clarify design requirements and resolve problems encountered during PCB assemblies.

Qualifications & Competences

• Minimum Degree/ Diploma in Electrical/ Electronic Engineering with 5 years working experiences in PCB layout design
• Knowledge in Cadence Allegro, Altium or any other electronics design software
• Experience in high speed, mixed signal, power and RF board design would be an advantage
• Sound knowledge of IPC-2221
• Good interpersonal skills to work with team members
• Self-motivated and able to work independently and efficiently

What can we offer

• Exciting and diverse duties and responsibilities await you within a dynamic international company environment experiencing sustainable growth.
• We provide you with a platform where you can further develop your passion and technical competence and onboard an exciting industry, and market-oriented career.
• We offer you an attractive, performance-related payment package. We focus on an efficient, process-oriented organization, where the individual responsibility and self-organization of our employees as ‘entrepreneurs within the company’ are particularly advanced.
• The company is one of the globally leading players in the connection and automation technology space offering to its customers innovative high-tech solutions.

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control
• Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of electrical works.
• Handle and resolve all site technical relating matters.
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met.
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules.
• Familiar with AUTOCAD Software.

- Designing electrical system

- Ensure designs meet industry standards and regulations

- Knowledge of design techniques

- Prepare technical documentation and reports

- Responsible for producing schematic drawings

- Proficiency in electrical design software (e.g., AutoCAD, Solidwork)

- Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.

- Assist and collaborate with other project team members to comply with project requirements and meet project schedules

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills

Overall Job Purpose

Responsible for configuring, implementing, and maintaining Project AVEVA Net/AIM and ISM instances. The incumbent will play a pivotal role in Project data capture, verification, and handover.

Core Responsibilities

• Be the Single Point of Contact for all matters related to setting up, maintaining, administering, upgrading, and troubleshooting the AVEVA NET system deployed on all MODEC

• Coordinate with the engineering disciplines assigned to the project and work closely with project management, procurement, HSE, QA/QC, operations, and the construction team. Meet or, where possible, exceed on-time deliverables while maintaining quality and safety in each activity.

• Establish and maintain the creation of a Class Library and define its structure and mapping techniques in ISM.

• Develop efficient data capture, validation, loading and handover work processes to meet Client/Project schedule requirements.

• Establish new project portals that effectively reflect client/project class libraries, data structure, and handover requirements.

• Ongoing Gateway configuration, maintenance, and development of AVEVA NET portals.

• Generation of Query Forms, SSRS and BI reports communicating data discrepancies, omissions, completion trending and status

• Raise the profile of information management and create a data-centric culture via effective portal development and deployment.

• Shall be capable of developing work instructions for users of AVEVA NET.

• Must understand company goals and implement management directives and policies.

• Anticipate potential problems and take preventive actions.

• Support the Product Manager in planning and delivering AVEVA NET solutions on projects.

• Shall train the MODEC users on the AVEVA NET application in projects.

• Interface with all disciplines to clarify/explain AVEVA NET intent and suggest alternatives when

• Contribute to continuous improvement of company work methodology/procedures.

• Conclude all open issues amicably.

Educational Qualification:

Certification(s):

• Training in AVEVA NET administration

Relevant Experience:

a) 5-10 years’ experience applying AVEVA NET in onshore/offshore Oil & Gas areas or FPSO line(s).

b) AVEVA NET/AIM and AVEVA ISM administration and implementation.

c) Be fully proficient in exception handling between the AVEVA system with associated Gateways and the Client system

d) Have extensive knowledge of AVEVA registers gateway interface with Client system

e) Experience in mapping Company data and document structures to Client structures. Have an in-depth understanding of FEED & Detailed Design deliverables, their execution methodology and their interdependencies with one another.

f) Have previous experience in engineering information management.

g) Possess previous experience with AVEVA Net Portal and ISM development and administration skills on Oil & Gas Projects, specifically for Major Capital Projects.

h) Knowledge of Engineering Design software like AVEVA E3D and AVEVA Engineering is a plus.

i) Possesses good working knowledge of the Oil & Gas Industry, including EPCs and owner-operators (preferred but not mandatory).

j) Shows evidence of good organizational skills.

k) Demonstrates ability to take the lead.

l) Good communication skills.

m) Commitment to take responsibility.

• Provide technical advice to customers on pumps related inquiries.
• Selection of pumps based on the specification given by customers.
• Provide coordination support to Sales Engineers.
• Handle sales process from quotation to finished goods delivery.
• Handle walk-in customers.
• Work closely with customers and maintain good business relations.

Job Requirements:

• Min. Diploma in Mechanical Engineering or any Engineering background.
• A Meticulous and fast learner with good communication skills.
• Experience in pump industry is a plus.
• Fresh graduates are welcome to apply.

Overall Job Purpose

Responsible for configuring, implementing, and maintaining Project AVEVA Net/AIM and ISM instances. The incumbent will play a pivotal role in Project data capture, verification, and handover.

Core Responsibilities

• Be the Single Point of Contact for all matters related to setting up, maintaining, administering, upgrading, and troubleshooting the AVEVA NET system deployed on all MODEC

• Coordinate with the engineering disciplines assigned to the project and work closely with project management, procurement, HSE, QA/QC, operations, and the construction team. Meet or, where possible, exceed on-time deliverables while maintaining quality and safety in each activity.

• Establish and maintain the creation of a Class Library and define its structure and mapping techniques in ISM.

• Develop efficient data capture, validation, loading and handover work processes to meet Client/Project schedule requirements.

• Establish new project portals that effectively reflect client/project class libraries, data structure, and handover requirements.

• Ongoing Gateway configuration, maintenance, and development of AVEVA NET portals.

• Generation of Query Forms, SSRS and BI reports communicating data discrepancies, omissions, completion trending and status

• Raise the profile of information management and create a data-centric culture via effective portal development and deployment.

• Shall be capable of developing work instructions for users of AVEVA NET.

• Must understand company goals and implement management directives and policies.

• Anticipate potential problems and take preventive actions.

• Support the Product Manager in planning and delivering AVEVA NET solutions on projects.

• Shall train the MODEC users on the AVEVA NET application in projects.

• Interface with all disciplines to clarify/explain AVEVA NET intent and suggest alternatives when

• Contribute to continuous improvement of company work methodology/procedures.

• Conclude all open issues amicably.

Educational Qualification:

Certification(s):

• Training in AVEVA NET administration

Relevant Experience:

a) 5-10 years’ experience applying AVEVA NET in onshore/offshore Oil & Gas areas or FPSO line(s).

b) AVEVA NET/AIM and AVEVA ISM administration and implementation.

c) Be fully proficient in exception handling between the AVEVA system with associated Gateways and the Client system

d) Have extensive knowledge of AVEVA registers gateway interface with Client system

e) Experience in mapping Company data and document structures to Client structures. Have an in-depth understanding of FEED & Detailed Design deliverables, their execution methodology and their interdependencies with one another.

f) Have previous experience in engineering information management.

g) Possess previous experience with AVEVA Net Portal and ISM development and administration skills on Oil & Gas Projects, specifically for Major Capital Projects.

h) Knowledge of Engineering Design software like AVEVA E3D and AVEVA Engineering is a plus.

i) Possesses good working knowledge of the Oil & Gas Industry, including EPCs and owner-operators (preferred but not mandatory).

j) Shows evidence of good organizational skills.

k) Demonstrates ability to take the lead.

l) Good communication skills.

m) Commitment to take responsibility.

Company Description

Working at Boskalis is about creating new horizons and sustainable solutions. In a world where population growth, an increase of global trade, demand for (new) energy and climate change are driving forces, we challenge you to make your mark in finding innovative and relevant solutions for complex infrastructural and marine projects.

Within a vibrant company culture, you will be working as part of a diverse, international team of experts. We offer you the opportunity to realize your full personal potential and expand your professional career by creating new horizons. Together!

Job Description

As a Salvage Engineer, the world is your playground. You never know when or where a ship gets into trouble. That is why for a Salvage Engineer literally every day is different. It sounds like a cliché, but it is the reality. As a Salvage Engineer, you will have an adventurous job. When a ship is in distress, you will travel to the emergency scene with a multidisciplinary team. Once on-site, you work together with the team to get the ship systems up and running again. You are responsible for the vessel maintenance, trouble shooting, and on-site repairs of our salvage equipment. It is vital to salvage the vessel as quickly as possible. As well as working on actual ship salvage operations.

Your responsibilities as a Salvage Engineer

• As part of the mobile team, reports to the Salvage Master/Project Manager at site.
• When at base, assisting the technical manager and the operations manager to set up the right maintenance procedures and carry out the planned maintenance system of our equipment.
• Sharing knowledge with other engineers about complex ship's systems and maintenance solutions.
• Advising the salvage inspector and superintendent about how to break into existing ship's systems in order to use them during the salvage operation.
• Producing reports about the actions taken to get systems operational again. As you can expect from a leading international maritime service company, you will work with state-of-the-art equipment.

Your qualities

To make your mark as a Salvage Engineer with SMIT Salvage, you will need a flexible approach; you never know when or where your next project will be. You adapt easily to working with different teams and you are fully proficient in English. Of course, you are happy to work irregular hours and to spend longer periods of time abroad. In addition, you have:

• An experience sailing onboard ships.
• Worked for at least 5 years on modern (merchant) ships.
• Preferably experience with a range of different types of vessels and engine-room plants.
• Ability to handle heavy duty diesel machineries, hydraulic, pneumatic and basic electrical etc.
• Willingness to work on weekends and public holidays frequently.

Qualifications

What you can expect

• Career opportunities: We challenge you every day to get better. Together we realize your full personal and professional career by creating development opportunities.
• Warm welcome: We warmly welcome our new colleagues, so they feel at home as soon as possible. During your onboarding program, we give you all the ins and outs of Smit Salvage!

Extra information

• Your team: As a Salvage Engineer, you will work for SMIT Salvage Singapore. You will work for one of the largest salvage companies in the world. You are part of a team of 6 Salvage Engineers. You will also work with various other colleagues who are part of the Salvage team.
• Where you will work: You will work at our warehouse in Singapore (23 Gul Road) and at project locations onboard vessels worldwide.
• Procedure: You can easily apply by filling in the online application form and uploading your CV and cover letter. You will always receive an immediate confirmation of receipt by e-mail. It is not possible to apply by email, the contact form or by post. Depending on the position, we invite you for two or more job interviews. If you have successfully completed all steps, you will receive an offer from us and we would like to welcome you to Smit Salvage Singapore!

Additional information

We’ll be happy to answer your questions about the position of Assistant/Salvage Engineer. Please contact Arshad Asharaf, corporate recruiter via our careers page.

Interested? Please apply by filling in your details and by uploading your cover letter and CV on our careers site.

Disclaimer for recruitment and selection agencies

We appreciate your interest in our vacancies and understand that your candidate might be enthusiastic about this exciting opportunity. However, our recruitment process is not structured this way, at Boskalis we handle recruitment ourselves. Therefore, we do not accept unsolicited applications or CVs from recruitment agencies. Any submission will be treated as a direct application.

LI-AASH

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

RESPONSIBILITY
· Plan and allocate tools, material and manpower for fabrication;
· Ensure that all the technical reviews by engineering team comply with project requirements;
· Coordinate all technical queries with related parties – engineering team, client, vendor etc;
· Assist Project Manager in streamlining work processes;
· Coordinator with team to review all subcontract and supplier shop drawing, product data, samples,
manuals etc for all compliance with contract documents;
· Manage vendor documents for all equipment;
· Monitor and ensure all the vendor equipment delivery are on time, including checks on inspection status and requirement;
· Prepare tender submission, cost estimation and project change request;

*Prepare monthly P&L reporting.

*Able to use AutoCAD – Advance Steel Software.
· Any other duties as assigned.

Please note that duties of the Employee may change and develop over time.

REQUIREMENTS

· Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Mechanical) or equivalent

· Proficient in design software such as PV AutoCAD

· Proficiency in English language (spoken and written) with strong communication skills

Mechanical Component Engineer

Do you enjoy being part of team that provides high-quality services for our customers?

Would you like to be in a team delivering world class service to our customers?

Be part of a successful Customer Service team

Baker Hughes Valves is a global technology company that designs, develops and manufactures the highest quality, most accurate and reliable control valves and safety valves products, services and solutions to our customers across a large range of process industries.

Partner with the best

As a Mechanical Component Engineer, you will be in charge of BoM and technical support for Pressure Safety Valves (Consolidated) and Control Valves (Masoneilan). You will also provide a global engineering support focused on Channel Partners and Aftermarket Centers for the selection, repair, maintenance, and replacement of Masoneilan and Consolidated products.

As a Mechanical Component Engineer, you will be responsible for:

• Executing design and analysis of assigned projects to develop valves meeting customer application needs, specification requirements, complying with local design/product standards.
• Reviewing customer specifications and “translating” customer specification in to order instructions for manufacturing of valves.
• Providing Retrofit solutions, with bills of material, drawing information, test specifications and processing instructions to meet quality and manufacturing requirements.
• Creating the design review process, ensuring accuracy, quality and design for manufacturability goals are met.
• Enabling the use of design tools (like 2D / 3D CAD (SolidWorks / ProE / UG), Excel, and in-house design calculations.
• Engaging with sales to support the quotation activities.
• Identifying, Own and Enable such initiatives which are in line with business objectives.

Fuel your passion

To be successful in this role you will:

• Have a Bachelors in mechanical / mechatronics from an accredited uni, (or a diploma / GED with at least 4 yr of experience in Engineering/Technology)
• Have 0-2 yr of Mechanical Engineering experience
• Be proficient in SolidWorks or similar Computer Aided Design software
• Possess knowledge of basic mechanical engineering design principles
• Have knowledge of geometric dimension and tolerance as it relates to individual parts and overall assemblies
• Be able to work independently and have good problem-solving skills.

Work in a way that works for you

We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns:

This role is a Full Time Regular, live in country

Working with us

Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.

Working for you

Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:

• Contemporary work-life balance policies and wellbeing activities
• Comprehensive private medical care options
• Safety net of life insurance and disability programs
• Tailored financial programs
• Additional elected or voluntary benefits

Job Description & Requirements

Candidate must possess at least Diploma/ Dgree in Engineering (Electrical)

• Preferable with 2 Year(s) of working experience in the related field is required for this position.
• Entry level candidates are welcome to apply.
• Preferably Junior Executive specialized in Engineering - Electrical or equivalent.
• 6 days work week.
• Good interpersonal and communication skills.
• Rotating shift

Responsibilities:

• Responsible for all works related to Project Engineer duties
• Able to prepare shop drawings, as built drawings of electrical services
• Able to visualize site condition and make necessary proposal
• Will need to assist in other department

• Assists the Project Manager in managing and supervising the execution of production works and ensuring the delivery of assigned projects
• Assists the Project Manager in planning and prioritising the order of works and work methodology
• Liaises with the project team to allocate adequate manpower and equipment resources
• Monitors work progress on board vessels and in workshops
• Conducts production meetings between Yard’s subcontractors, supervisor and ship’s staff to clarify work scope, co-ordinate sequence of work, update schedules and other contractual matters, as and when required
• Ensures works are carried out according to the job specifications in terms of quantity, quality and meeting Class/Owner requirements by developing test plans and arranging for inspection and survey for the Superintendents and Classification
• Completes the process of mechanical completion and commissioning scope of work
• Any other associated tasks and responsibilities assigned from time to time

Requirements:

• Bachelor's Degree in Marine Engineering, Shipbuilding, Naval Architecture, Mechanical Engineering or relevant apprenticeship training in a marine trade
• Knowledge of various workshops dealing with specialised works in the industry
• Able to perform scheduled night duties when required
• Attend to vessel’s needs during weekends and public holidays
• Travel within the country or abroad for ship check
• Good knowledge of marine industry skills in any discipline
• Knowledge in Hull,Mechanical, Piping & Electrical will be advantageous
• Good planning,organization, control, problem-solving, interpersonal and communication skills
• Good knowledge of project management software and other planning softwares

Our Address:

Seatrium (SG) Pte. Ltd.

Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Our Working Hours:

Mon – Thurs: 8:00am – 5:15pm

Fri: 8:00am – 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

1. Lead sales and operation / project team

2. Set direction and guide the project team for all the project

3. Ensure project all is provided with support and advise all aspects of project planning, execution, monitor and control

4. Value engineering, lean engineering and selection of equipments

5. Liaising with main contractor, owner, stakeholder & consultant

6. Check and ensure the scope of work for all the fire protection system and services

7. Prepare weekly, monthly report and project budget

8. Overseeing current project as well upcoming projects

9. Attend and conducting project review and attend meeting

10. Ensure the project delivery as planned schedule and manage operational cost within the budget

11. Prepare and submit authority required documents

12. Monitor compliance of work with the workplace safety and health regulations

13. Maintain customer relationship

14. Knoweldge in AUTO CAD & Revit

14. Other ad-hoc duties as assigned by management