Job Description

• Perform electrical power system analysis studies including: relay coordination study, fault level study , arc flash study using ETAP software
• Perform design calculations including: cable sizing, voltage drop calculation as per code requirements and local regulations and go through with PE
• Preparation of quotation and follow up to secure purchase orders
• Consult and discuss with relevant authorities for planning and designing of power stations

Requirement

· Bachelor Degree in Electrical Engineering (Preferably NTU or NUS)

· Training on ETAP studies will be provided and fresh graduates are welcomed to apply

· Good interpersonal and communication skill.

· Team player & able to work independently

Transport is provided from 6 MRT pickup points ie Paya Lebar, Serangoon NEX, Bishan, Jurong East, Joon Koon, Woodlands

• Lead Production team to drive kaizen events and continuous improvement projects.
• Plan and assign daily work schedule for technicians.
• Develop training plan for team members to meet production demands.
• Investigate and resolve production technical challenges.
• Provide equipment and production tools as needed to ensure that business continuity and manufacturing efficiencies.
• Support and work with NPD and RR to conduct manufacturing process trials and prove out.
• Maintain reliable and safe production activities while improving manufacturing efficiencies.
• Improve process capability and production volume while maintaining and improving quality standards.
• Monitor Production metric and develop continuous improvement plan through process improvement.

Requirement

• Minimum Diploma in Mechanical Engineering or relevant discipline
• 10+ years of experience in relevant industry is required (Oil & Gas and Manufacturing combined).
• Good understanding of LEAN Six Sigma.
• Leadership experience in managing technicians is preferred.
• Experience in assembly and testing processes is preferred.
• Experience in SAP is preferred.
• Willing to working on shift or on weekend as and when required.

Key Responsibilities:

• Configure, and manage Cisco Catalyst Switches (IOS), Cisco Nexus Switches (NXOS), and Alcatel Lucent Switches (AOS) to maintain a secure and efficient network infrastructure.
• Implement and maintain Palo Alto and Fortinet Fortigate Firewalls for network security and access control.
• Administer Alcatel Lucent Wireless Controllers to ensure a secure and robust wireless network environment.
• Utilize SolarWinds NPM (Network Performance Monitor) and NCM (Network Configuration Manager) for network monitoring and configuration management.
• Manage and maintain ClearPass Policy Manager for network access control and policy enforcement.

Requirements:

• Bachelor’s degree in Computer Science, Information Technology, or related field.
• 3+ years of experience in network security engineering.
• Proficiency in Cisco Catalyst Switches (IOS), Cisco Nexus Switches (NXOS), and Alcatel Lucent Switches (AOS).
• Experience in configuring and managing Palo Alto and Fortinet Fortigate Firewalls.
• Hands-on experience with Alcatel Lucent Wireless Controllers.
• Familiarity with SolarWinds NPM / NCM for network monitoring and configuration management.
• Proficient in ClearPass Policy Manager for network access control and policy enforcement.
• Knowledge of network protocols, security architectures, and best practices.

Job Description

• Work as a member of the technical team to provide process engineering support for operations
• Provide technical advice / support to daily operational issues
• Perform unit optimization, troubleshooting, de-bottlenecking studies
• Lead/participate in safety initiatives including risk assessments and HAZOP reviews
• Support on-going reliability improvements and equipment strategy development
• Analyze complex technical issues, identify key drivers, propose strategy / recommendations to support decision-making/resolution of technical issues
• Responsible for the development/execution of margin improvement ideas/projects
• Job role can be assigned to start at either the Chemical Plant or Refinery

Job Requirements

• Degree in Chemical Engineering from a recognized university
• Open to fresh graduates, or with up to 3 years of relevant process engineering/design experience in the petrochemical / chemical / refinery industry
• Knowledge of process modeling software and experience in the use of relevant technical computing tools and design tools for hydraulic calculations, TRV relief amongst other evaluations
• Familiarity with the development of H&MB, PFD / P&IDs and design specification of process equipment
• Good knowledge of industry standards and practices related to process design and safety

Responsibilities:

• Implements and monitors security measures for the protection of computer systems, networks and information
• Identifies and defines system security requirements
• Develops technical solutions and new security tools to help mitigate security vulnerabilities and automate repeatable tasks
• Prepares and documents standard operating procedures and protocols
• Coordinates with line of business for cybersecurity compliance matters and project initiative
• Works with the various team to perform analysis of security events, network traffic and identify incident root cause and steps to mitigate the risk
• Performs vulnerability assessment and remediate the findings
• Follows up on the security advisories and threat intelligence report shared by regulators and MSP

Requirements:

• Bachelor's degree in Computer Science, Cybersecurity, or a related field
• Minimum of 5-7 years of experience in cybersecurity
• Experience in building and maintaining security systems
• Experience with network security and networking technologies and with system, security, and network monitoring tools
• Familiar with web related technologies (Web applications, Web Services, Service Oriented Architectures) and of network/web related protocols
• Hands on experience in security systems, including firewalls, intrusion detection systems, anti-virus software, authentication systems, log management, content filtering, etc
• Detailed technical knowledge of database and operating system security
• Proven work experience as a System Security Engineer or Information Security Engineer

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Pioneer Yard)

50 Gul Road, Singapore 629353

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Roles & Responsibilities:

We are looking for a creative/ responsible Mechanical Design Engineer to join us.

The Mechanical Design Engineer is responsible for preparing and completing design 3D & 2D drawings in accordance with the clients’ requirements, and issue drawings to production for fabrication. the engineer should have conceptual / detailed design abilities and work with a multi- teams and interactions with vendors.

Qualifications/ Job Experience:

· Degree & Diploma in Mechanical Engineering

· 2 years’ experience in mechanical Design.

· Proficient in SOLIDWORKS ,AutoCAD software, it is a must.

· Interested in Heavy vehicle industry /Automotive experience preferred.

· Water/foam tank, steel piping schematic experience is the best.

· Basic knowledge of ISO9001 standard.

· Knowledge of Microsoft Word and Excel.

Job Duties & Responsibilities

• Specialize in processes and perform detailed troubleshooting and failure analysis
• Guide technicians and operators to achieve the required output and quality
• Check on supplementary materials changes to ensure they are properly done
• Assist the Engineer in checking on all control charts and checklists
• Ensure smooth production operation with production report done
• Monitor, troubleshoot, and improve production daily final test yield
• Perform maintenance and troubleshooting of machinery
• Any other jobs as assigned by the supervisor

Qualification

• Degree in Electronics / Mechatronics / Electrical / Mechanical discipline

Soft Skills Required

• Basic operation & manpower management knowledge
• Computer software knowledge in Microsoft Excel and Word
• Good communication skills

Others

• Cleanroom working experience would be a plus

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others) or equivalent.
• Required skill(s): MS Office, AutoCad.
• At least 3 year(s) of working experience in the related field is required for this position.
• Preferably Senior Executives specializing in Engineering - Civil/Construction/Structural or equivalent.
• Full-Time position(s) available.
• Responsibilities of a project site engineer includes:
  • Supervising and organizing daily site activities
  • Coordinating with various parties and controlling progress of the project, making sure that the schedule is kept
  • Monitoring resources on site, like equipment, manpower and sub-contractors, ensuring that sufficiency, availability and performance are aligned with the schedule.
  • Preparing periodic project progress report to Management.
• Qualities that a competent project site engineer should have:
  • Great troubleshooting skills
  • Good oral and written communication skills
  • Good public relations and organization skills
  • Enjoy problem solving
  • Ability to handle multiple projects simultaneously.
• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree,
  Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Industrial), Quantity Survey, Engineering (Environmental/Health/Safety) or equivalent.
  At least 2 year(s) of working experience in the related field is required for this position.
  Preferably Senior Executives specializing in Engineering - Civil/Construction/Structural or equivalent.
  Full-Time position(s) available.

PT Trakindo Utama Singapore Branch is expanding! The Power Systems department is looking for two exceptional project engineers to bolster the department's capabilities! Aspiring applicants can look forward to a dynamic career, engaging stakeholders on all aspects of their electrical needs, and to exercise their creativity and robustness in delivering solutions and customizations!

Our office is located just 6 minutes away from Tuas Crescent MRT, within walking distance from the MRT Exit.

We invite aspiring applicants to join our team, and experience the prestigious legacy of our Company, let's advance forward together!

Primary Objective of Position

• Responsible for all electrical aspects and management of projects, including tendering, design, drawing, scheduling, purchasing, testing, packing, shipment and commissioning of power generation sets on site.

Duties & Responsibilities

• Coordinate all electrical interfacing of designated projects to meet specifications
• Instruct draughtsperson to prepare electrical drawings for tender replies and awarded projects according to customers' specifications
• Review returned drawings and modify as required for construction
• Coordinate with contractors on genset build up
• Provide specifications for control panels, generators and switchgears to vendors
• Liaise with vendors for quotations to procure/fabricate
• Coordinate with Parts Dept on order for CAT parts
• Assist with final technical inspections and testing of equipment
• Prepare packing list and coordinate with HPL on packing, delivery and shipment
• Perform on site commissioning as and when required
• Prepare project costing and report to the Project Manager
• Attend/Conduct engineering and project meetings both in Singapore and overseas (when required)
• Perform calibration of electrical items
• Assist in review and update of department procedures and manuals
• Fulfill other adhoc duties as assigned by Management

Person Specifications

• Possess a degree in Electrical/Power Engineering or 2 years of related experience in Power Generation Engineering and/or Project Management
• Proficient in Microsoft Office applications
• Knowledge in electrical aspects of power systems and control panels

To act as the overall assistant to project manager for delivering projects to the client, ensuring work is completes on time, within budget, and in accordance with client and company requirements.

Report directly to project manager/director.

Runs the project as an assistant on a daily basis from conception to completion on a daily basis and ensures all documentation is produced to a high standard for Reporting.

Responsibilities:

Database Administration

• Act as the Subject Matter Expert for database-related services.
• Manage the daily BAU operation of database-related services.
• Carry out service monitoring, end-to-end performance correlation, and database performance optimization. Create, review and update system documentation and work instructions to enhance the efficiency of daily operations.
• Perform capacity planning to size database resources to meet the demands of application workloads.
• Plan, execute, and monitor backup schedules in accordance with business needs and data retention policies.
• Review database security, perform database hardening, and apply regular or ad-hoc security patches to ensure compliance with IT security policy.
• Coordinate/Support with application support teams to schedule database updates and upgrade databases with minimal business impact.
• Provide Level 2 support for database service-related queries.
• Perform incident escalation in accordance to escalation procedures.
• Coordinate with other functional teams in incident handling, and ensure incidents are resolved or work- around within stipulated SLAs.
• Contribute to or drive root-cause analysis.
• Ensure that all internal processes and procedures are up to date and in accordance with the company's directives.

Data Services Provisioning

• Perform requirement gathering with application support teams.
• Recommend appropriate data services and system capacity according to agreed requirements.
• Develop configuration policies to optimize security, performance, and availability.
• Set up data services according to policies and guidelines.
• Set up data pipelines for data analytics and dashboard initiatives.
• Coordinate with other functional teams to complete the work required to operationalize data services such as IP address assignment, DNS requests, firewall port opening and security scan, database onboarding, data pipeline creation, database monitoring, and database performance monitoring.
• Ongoing review and improvement of process flow, system, and processes through automation, innovation, as well as the adoption of new technologies.

Implementation of IT Initiatives and Solutions

• Provide feedback on the design of data services for new systems.
• Support execution of database services initiatives and business projects.

Requirements:

• A recognized diploma or degree in IT or related fields.
• Minimal 5 years of hands-on experience in systems and database administration in an enterprise or campus environment.
• Hand-on experience in administering MSSQL, Oracle database (10g and above), Oracle high availability technologies such as RAC and Data Guard, database performance tuning and troubleshooting, and database upgrades and migrations tools.
• Hand-on experience in data cleansing, data transformation, and data quality management.
• Hand-on experience in developing dashboards using data visualization tools e.g., Qlik Sense, Power BI and etc.
• Knowledge of MariaDB, MySQL, and PostgreSQL.
• Experience in Windows, and Linux variants, preferably Red Hat and Ubuntu.
• Experience in capacity planning, availability management and business continuity management.
• Experience in project management.
• Independent, highly motivated and a proactive team player who can work with minimal supervision.
• Excellent in written and verbal communication.

The following certifications while not necessary, will be an added advantage:

• Database Administrator Certified Professional for MSSQL/Oracle/MySQL
• ITIL Foundation Level
• Certified Professional in Data Analytics/Data Visualization/Data Virtualization/Machine Learning
• AWS/Azure Certifications

About the role

This position is for a Project Engineer, an established professional in New Equipment Modernization responsible for project schedule updates, report documentation, and acts as the primary contact with customers. Resolves customer issues and escalates more complex issues as needed.

Key Responsibilities:

As a Project Engineer, you’ll be responsible for:

• Reviews project expenditures to ensure the accuracy of all invoices/applications for payment in accordance with purchase order and subcontract terms and conditions. Also ensures that they are processed (approved/authorized)in a timely manner.
• Updates project schedules and prepares project management correspondences and documents effectively on all aspects of the implementation phases, including customer meeting minutes, team assignments/action item tracking, letters, memorandums, transmittals and RFIs.
• Acts as the primary contact with customers, develops a professional relationship, and understands the customer needs to meet those within the bounds of contracted scope.
• Understands and communicates job schedule to all project team members to ensure timely completion of project.
• Adjusts orders for any changes to the scope for moderate projects.
• Manage Project and Controls
• Attend to Meetings with customers, consultants, contractors, etc .
• Paper documentation submission, approval, job site status,
• Manage sub-contractors.

Requirements

We are looking for people who has excellent stakeholder management and experienced in project management. If this is you, get in touch.

As a minimum you must have:

• Minimum Diploma holder in Engineering
• Minimum 2 years of relevant experience in project management.
• Preferably possesses certification such as Project Management certifications and Work at Height certifications
• Experience in Office Skills (Excel) is desired to have

Job Info:

• Salary: Basic from $4000 - $4500 + Performance Bonus
• Working Hour: Monday - Friday (9am - 6pm)
• Location: Pioneer

Job Scope:

• Ensure client instructions were properly documented and communicated downstream
• Interpreting of customer's documents and ensure Customers' instructions align with the work scope stated in quotation.
• Cross-reference customer's instructions with reference specification(s)
• Ensure proper markings of Samples for machining/cutting
• Comprehensive and accurate input in DWO
• Check for all internal (e.g., quotation) and external (e.g., mill certificate) documents and upload to system
• Ensure instant update of the documents whenever there are changes
• Ensure instant communication of any changes to downstream personnel
• Oversee the scheduling and coordination of the test jobs with Workshop and Testing Department(s), including ensuring there is prioritization of jobs
• Ensure anticipation of longer lead time for jobs that require special preparation works for specimens or fixtures
• Understand customers' testing objectives and Attend to Customers' enquires and to provide professional technical advice
• Work with Draftsman to draw up sample plans to advise customers and instruct workshop on cutting/machining

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

· Prepare detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Participate in the coordination with other disciplines in preparation of design deliveries.

· Participate in preparing tender documentations.

· Participate in the successful delivery of projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· Conversant with local codes and authority submission procedures.

· Excellent interpersonal, good written and verbal communication skills.

· Have good knowledge of common engineering design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures).

· Strong analytical skills.

· Able to work under pressure with good time management skill.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact telephone number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Dornier MedTech, a wholly-owned subsidiary of Advanced MedTech Holdings, with manufacturing headquarters in Munich, Germany, is a medical device company known for its pioneering technologies and revolutionary therapies in urology. Through its deep rooted spirit of entrepreneurship and excellence, Dornier continues to spearhead innovations in urology, developing some of the highest quality urological devices on the market today.

As the pioneers of the Extracorporeal Shock Wave Lithotripsy (ESWL) non-invasive kidney stone treatment method and leader in Holmium laser urological equipment, Dornier MedTech is one of the most trusted names in the industry. Working closely with physicians and patients, Dornier is committed to improving lives through game-changing innovations in medical technology.

This role will is responsible for the management of all service and support issues as well as field related upgrades, changes and modifications.

Job Responsibilities

• Perform on-site troubleshooting, installations, start-ups, maintenance, repairs and updates/upgrade of the ESWL/ESWT and LASER systems
• Plan, schedule and perform periodic preventive and corrective maintenance to ensure that the Products continue to perform reliably
• Respond to unscheduled service calls
• Provide technical support and service training to distributors and local customers
• Update records of installation and device history and manage the final acceptance certificate database
• Track and record all returned goods authorization and manage all warranty and contract claims
• Monitor and perform tools maintenance and calibration
• Coordinate with manufacturers on technical and service-related issues
• Recommend and manage replacement spare parts sales or optional hardware for system upgrade or conversion
• Create and update training materials to maintain the relevance to the software/hardware ofthe current models
• Support product demonstrations, seminars, workshops, tradeshows, conventions, and exhibitions related to Company’s products
• Liaise with vendors on technical purchases

Job Requirements

• Degree/Diploma in Biomedical or Electrical/Electronics Engineering

We regret that only shortlisted applicants will be notified.

Join Our Team as a Senior Process Engineer

Are you a driven and motivated Senior Process Engineer looking for a new challenge? We're seeking a dynamic individual to join our team and play a pivotal role in process design, safety, support, evaluation, and compliance. As a Senior Process Engineer with us, you'll have the opportunity to collaborate with cross-functional teams, engage in process improvement initiatives, and ensure the efficiency, safety, and regulatory compliance of our operations.

Key Responsibilities:

Process Design and Engineering:

• Lead and develop specifications for various equipment for new projects or modifications.
• Drive the development and updating of P&IDs and piping line lists for new projects or modifications.

Process Safety:

• Take a leadership role or actively participate in Process Hazards Analysis (HAZOP, What-ifs, Bowtie, and LOPA).
• Draft and evaluate training materials covering topics on process safety, energy, and industrial incidents.
• Lead process design activities, including basic sizing calculations for process safety and operational equipment.
• Conduct periodic process safety activities, such as testing of alarms and interlocks.
• Provide expert advice to the operations team on process optimization and troubleshooting.
• Lead and implement process improvement projects.
• Be a contributing member of the company’s Major Hazard Installation (MHI) team.

Process Support:

• Ensure technical support is readily available to cross functional departments during process plant trials.
• Offer guidance to the operations team in troubleshooting production and quality issues.
• Lead impact assessments of changes arising from the Management of Change process.
• Contribute to incident investigations as needed.

Process Evaluation:

• Assist the Head of Technical in technical evaluations when assessing new process needs from existing or new customers.
• Support Head of Technical in project costing activities.
• Lead the development of test procedures and analytical requirements for trial testing in the laboratory.

Regulatory & Audit Compliance :

• Lead in the annual license renewal of the relevant regulatory agencies.
• Assist Head of Technical in the routine and recertification audits and subsequent closure of findings.
• Lead in the completion of process safety / predictive aspect related Intervention plans as part of the requirement for working in a Major Hazard Installation (MHI).

Management:

• Manage and ensure execution of company and departmental goals and objectives.
• Provide guidance and training to junior Process Engineers.

What We're Looking For:

We invite applications from candidates who possess:

• A recognized chemical engineering degree.
• A minimum of 5 years of working experience in the petrochemical or related industry.
• Strong technical and problem-solving skills.
• A proactive and results-driven attitude.

This full-time, on-site position offers the chance to work within a collaborative environment where innovation and dedication are valued. If you're excited to contribute to process optimization, safety enhancement, and regulatory compliance, we encourage you to apply and become a part of our dynamic team.

SR Quality / Quality Lead/ Supervisor (QAQC)

Location: Penjuru Place (shuttle bus provided)

Monday - Friday 8am - 5.30pm

The Quality Lead/ Supervisor is responsible for ensuring timely and effective implementation of the company's policies, procedures, and standards involved in assuring the quality of manufactured products and customer satisfaction, as well as for conducting quality control activities. The Quality Supervisor strives to ensure the facility adheres to quality licenses, standards and certifications.

A successful candidate will collaborate closely with functional areas such as Manufacturing, Procurement, Mfg. Engineering, Sustaining Engineering, Product Lines, R&M and Geozones regularly as well as presenting to internal teams plans and updates.

Job Responsibilities:

• Supervise and lead 4 Quality Control Inspectors and liaise with internal & external stakeholders.
• Maintain site Quality Management System.
• Update QMS records and maintain all necessary documentation and certificates.
• Responsible for following management of change as processes and procedures are updated as per QMS requirements.
• Perform regular process audits in Manufacturing areas and functional areas, including technical work instructions, processes, procedures, and competence and ensure compliance.
• Generate CARs related to any deficiencies and track them to completion.
• Keep competency records up-to-date.
• Conduct training related to QMS, procedures, WIs, others.
• Actively participate in Contract Reviews.
• Develop customer QCP Plans. Ensure contractual requirements are built into Quality Control plans.
• Actively participate in Pre-Production meetings.
• Coordinate Client visits, and audits and constant communication to demonstrate our commitment and promote the Corporate Quality Management System.
• Drive action trackers to completion, related to customer audits, manufacturing reviews or qualification process.
• Coordinate TPIs per customer QCPs, and per production schedule. Ensure documentation meet requirements.
• Review/release WOs from a Quality point of view.
• CPARs/NCRs/COPQ; monitor performance/trends, data analysis, and evaluate the effectiveness of corrective actions to ensure that the required improvements are sustained. Actively participate in RCA. Monitor/track other Quality KPIs.
• Coordinate with product design engineers and manufacturing engineers the requirements in the quality plans and inspection and test plans to be aligned with their engineering design criteria, production schedules and customer requirements.
• Coordinate quality assurance plans for new PNs/product introductions.
• Review and approval purchased materials/products mill test certificates if it complies with the required company specifications and/or applicable industry standards prior to acceptance and use.
• Ensure quality control inspection and testing activities are performed in accordance with Global MFG QMS, customer QCPs/Inspection matrices, and/or local procedires and work instructions.
• Manage non-conformance process in accordance with Global MFG QMS.
• Identify a minimum of two continuous improvement projects per year to lead and complete with measurable improvement to the business in terms of margin, quality, etc
• Any other delegated responsibilities as instructed by his direct supervisor within the timeframe specified safely and efficiently to meet business requirements, provided the instruction is reasonable and you are capable and deemed competent to fulfil these.

Job Requirements:

• 5 to 8 years of experience with ISO-9001
• Minimum 5 years of experience in QA/QC role in the manufacturing environment
• Excellent written, reading, and oral communication in English
• Computer literate and familiar with Microsoft Office software at a minimum
• Fast learner, results-oriented and independent with strong interpersonal skills
• Possess strong customer service skills, i.e. listening, follow-through, and willingness to help
• Certified Auditor
• Ability to read engineering drawings
• Ability to interpret MTCs (Material Test Certificates) against the Company specifications
• Skilled at data mining (Excel Pivot Tables, other Excel tools)

Preferred

• Lean / Six Sigma experience
• Certified Lead Auditor
• Root Cause Analysis implementation experience
• Power BI dashboards.

Overview

This position is responsible for the rapid development and deployment of high-performing AI and Data Science models suitable for advanced manufacturing of electric vehicles.

Responsibilities

• Rapidly develop, deploy, and enhance high-performing and purpose-fit Visual Inspection algorithms, including Anomaly Detection, Object Detection, and Image Classification.
• Advance Human Understanding algorithms, encompassing (2D/3D) Human Pose estimation, Behavior classification, and Person Re-identification.
• Apply cutting-edge Multimodal and LLM Models to Information Retrieval and Question-Answering tasks.
• Take ownership of the complete data life-cycle for AI and Data Science algorithms: from creation/extraction and transformation to annotation, loading, storage, update, and deletion.
• Participate actively in cross-functional Agile projects, contributing to the collaborative development and integration of AI solutions.

Requirements

• Bachelor's or Master's degree in Computer Science, Electrical Engineering, Industrial Engineering, or equivalent practical experience.
• At least 2 years of working experience in Artificial Intelligence, Machine Learning, Computer Vision, Statistics, Data Analytics, or Data Science is preferred.
• Hands-on experience in the following areas: Anomaly Detection, (2D/3D) Human Pose estimation, Behavior classification, Abnormal behavior detection, Online/Continual Learning, Multimodal/LLM Models, or other related fields of AI/Machine Learning.
• Understanding of state-of-the-art theories in AI/Machine Learning.
• Skills/experience with one or more programming languages, including Python, C++, or Java.
• Expertise in deep learning frameworks, including PyTorch or TensorFlow.
• Experience in Agile methods and design thinking is an advantage.
• Experience in MLOps is an advantage.

JOB SCOPE

Able to do Master cam Programming for CNC Milling and Turning Machines using Master-Cam

Must be familiar with CNC operation and setting with Mazak

Able to interpret Engineering drawing, process drawing

The candidates should be familiar with all cutting tools and terminology

The person candidates should be familiar with Geometrical Dimension and tolerance

REQUIREMENTS

Should have a diploma in Mechanical Engineering / Precision Engineering

Should have experience in the oil and gas industries

Minimum five years of experience is required

Location

Toh Guan

Number of working days

5 days a week

Responsibilities:

• Conducts risk assessments on OT systems and identify potential vulnerabilities and threats
• Designs and implements cybersecurity controls and measures to protect OT systems from cyber-attacks and other security threats
• Collaborates with cross-functional teams to ensure cybersecurity requirements are integrated into the design and implementation of new OT systems
• Conducts regular cybersecurity assessments and audits of OT systems to ensure compliance with cybersecurity standards and regulations
• Develops and maintains incident response plans for OT systems and provide support during cybersecurity incidents
• Conducts security awareness training for OT system users and stakeholders
• Stay up-to-date with emerging threats and cybersecurity trends in the OT space and make recommendations for new security measures and controls

Requirements:

• Bachelor's degree in Computer Science, Cybersecurity, or a related field
• Minimum of 3-5 years of experience in cybersecurity, with a focus on OT systems
• Experience with OT systems, such as SCADA and DCS
• Strong understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Familiarity with cybersecurity standards and regulations, such as NIST, IEC 62443, and ISA/IEC 62443
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills
• Relevant cybersecurity certifications, such as GIAC GICSP, ISA/IEC 62443 Cybersecurity Fundamentals Specialist, or similar

Our Addresses and Working Hours:

(Pioneer Yard)

50 Gul Road, Singapore 629353

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description:

• Configures and installs various network devices and services (e.g., routers, switches, firewalls, load balancers, VPN, QoS)
• Performs network maintenance and system upgrades including service packs, patches, hot fixes and security configurations
• Monitors performance and ensures system availability and reliability
• Monitors system resource utilization, trending, and capacity planning
• Provides Level-2/3 support and troubleshooting to resolve issues
• Works within established configuration and change management policies to ensure awareness, approval and success of changes
• Selects and implements security tools, policies, and procedures in conjunction with the company’s security team
• Liaises with vendors and other IT personnel for problem resolution

Requirements:

• Bachelor's degree in Computer Science or related disciplines
• At least 5-7 years of similar experience
• Proven hands-on network engineering experience
• Certified in CCNP or higher (CCIE and/or CISSP highly valued)
• Good understanding of networking protocols (e.g., IPSEC, HSRP, BGP, OSPF, 802.11, QoS)
• Good understanding of the OSI or TCP/IP model
• Hands-on experience with monitoring, network diagnostic and network analytics tools

Our Addresses and Working Hours:

(Pioneer Yard)

50 Gul Road, Singapore 629353

(Islandwide transport provided)

Mon - Fri: 7:30am - 5:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities:

• Provides safety engineering guidance and support to other disciplines, ensuring assurance of technical safety aspects in design
• Ensures major hazards are identified, adequately assessed, evaluated and managed in accordance with relevant statutory, client and project-specific requirements
• Identifies safety engineering elements and propose solutions to rectify the situation
• Acknowledges changes in regulatory requirements and advise relevant departments of requirements to comply
• Develops specifications, terms of reference and scopes of work for specific safety engineering studies
• Gathers necessary information and provide inputs to safety studies
• Develops and supports safety philosophies: Passive Fire Protection, Escape Evacuation and Rescue, ESD, Fire & Gas Detection, Fire Fighting and functional safety management: FSMP, SRS
• Supports the development of ESD and F&G Cause & Effect design
• Leads hazardous area classification studies
• Prepares procedures, specifications, material requisitions, and technical reports relating to safety engineering
• Liaises with external stakeholders (e.g. classification society) where required
• Organizes, participate in HAZOP, HAZID, SIL/LOPA, risk assessments and other safety engineering reviews and close out the recommendations and actions
• Coordinates formal safety assessments: Dispersion, Fire, Explosion,Dropped object, Ship collision, EER Analyses, QRA etc
• Provides technical guidance regarding working practice/timescale of work carried out for contracted services
• Any other assigned duties and responsibilities

Requirements:

• Bachelor's Degree in Chemical Engineering or Petroleum Engineering with relevant experience in process/technical safety.
• Minimum 3 years of relevant experience
• Possess positive and willing to learn attitude

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Yard)

51 Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8 am – 5.15 pm

Fri: 8 am – 4.30 pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Description -

• Collaborate with Process and Equipment Engineer to establish automation design concepts and specifications, communications protocol, response plan and redundancy to achieve the required product specifications.
• Lead the execution phase of automation planning and design development, installation, configuration and testing as pre-requisite for Manufacturing Release.
• Manage automation hardware and software documentation, standards, revisions, and roll outs. Conduct training to Operations staff on the use of the SCADA/HMI systems.
• Lead the automation aspect of the Ink manufacturing to achieve cost, quality, availability, and safety metrics. Ensure ‘same ink’ quality & performance level with partner side.
• Establish automation plan and execute to meet new manufacturing requirements.
• Collaborates and communicates with management, internal, and outsourced development partners regarding design status, project progress, and issue resolution.
• Lead automation issues troubleshooting and corrective action implementation.
• Lead automation innovations and optimizations to achieve breakthrough cost, productivity, quality, safety, and efficiency.
• Develop and execute Smart Manufacturing/Industry 4.0 strategies for the manufacturing site.
• Work with IT teams for Project Implementations.
• Works on problems of diverse complexity and scope

Individuals who do well in this role at HP, usually possess:

• Bachelors or master’s degree in Electronics/Electrical Engineering or Computer Science.
• 4-6 years Automation experience in a Manufacturing or similar industry.
• This will be 2 years fixed term contract role directly with HP Inc.
• Experience in having direct responsibilities in manufacturing automation.
• Direct experience in PLC programming and DCS infrastructure.
• Experience in MES systems for Manufacturing Environments.
• Experience in Various Industrial Communications protocols
• Applied knowledge in SCADA/HMI, PID tuning, P&ID, sensor instrumentations, and industrial controls programming.
• Experience in script programming skills such as C++/C#/SQL/.Net is preferred.
• Experience in AWS, MS Azure Platforms and IoT Protocols for Manufacturing Projects.
• Ability to employ engineering tools and software to automate manufacturing processes.
• Demonstrated competency on industry-standard project management methodologies.

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices in Singapore.

#Li-Post

Job -

Schedule -

Shift -

Travel -

Relocation -

Equal Opportunity Employer (EEO) - 

HP, Inc. provides equal employment opportunity to all employees and prospective employees, without regard to race, color, religion, sex, national origin, ancestry, citizenship, sexual orientation, age, disability, or status as a protected veteran, marital status, familial status, physical or mental disability, medical condition, pregnancy, genetic predisposition or carrier status, uniformed service status, political affiliation or any other characteristic protected by applicable national, federal, state, and local law(s).

Please be assured that you will not be subject to any adverse treatment if you choose to disclose the information requested. This information is provided voluntarily. The information obtained will be kept in strict confidence.

If you’d like more information about HP’s EEO Policy or your EEO rights as an applicant under the law, please click here: Equal Employment Opportunity is the Law Equal Employment Opportunity is the Law – Supplement

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Driven by our Purpose, we are committed to building a more sustainable future to make the world better for everyone. With more than 16,000 employees in more than 50 countries, we combine our global reach with local presence. We support more than 10,000 customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. 

Join a company where the people challenge themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. You will be part of a team known for its industry-leading talent, unparalleled portfolio, and unmatched commitment to customer success. Flowserve’s culture promotes recognition and rewards creativity, hard work, and commitment. We invite you to put your talents and career in motion at Flowserve.

Flowserve is presently recruiting a Reliability Engineer to support our Innovation & Product Development initiatives reporting to the Director Application Development & Emerging Technologies.

This is an opportunity to take a lead role on supporting engineering design and consultancy activities on all aspects related to technical risks and reliability strategies. The Reliability Engineer will be part of a multidisciplinary team working on diverse projects, as well as supporting Reliability and Integrity Management programs on existing practices & facilities.

Responsibilities:

• Support the growth and development of the Reliability Engineering as a practice.

• Implementing and executing Design for Reliability (DfR) process

• Provide support to projects and operational teams by identifying technical risks and developing reliability studies for production/ processing systems and new product development.

• Supporting design and development teams by developing, assessing, and verifying Reliability & Maintainability-related requirements for mission-critical product and systems

• Develop reliability engineering studies to specific project requirements, including Failure Modes, Effects and Criticality Analysis (FMECA); Reliability, Availability and Maintainability analysis (RAM); Technical Risk Categorization (TRC); Technology Readiness Level Assessment (TRL); Life Data Analysis; Fault Tree Analysis (FTA) and Life Cycle Cost (LCC); as well as other methodologies and techniques related to Reliability Analysis and Reliability Centered Maintenance (RCM).

• Determine asset availability forecasting using applicable software.

• Produce asset Reliability Performance reports and work with failure investigation teams on Root Cause Failure Analysis (RCFA).

• Develop technical reports as necessary.

• Liaise with other disciplines for applicable engineering interfaces.

Required Skills / Qualifications:

• Engineering Degree, BS, MS Mechanical or Equivalent

• Minimum 10-years professional experience.

• Experience developing FMECA, RCM, TRC, TRL, RAM, and LCC studies as applicable.

• Knowledgeable on RCFA and risk reduction initiatives associated with field failures.

• Familiar with international codes and standards, including API (RP 17N / 17Q), ISO 14224, ISO 20815 and ASME to the extent required.

• Familiar with technical and operational reliability requirements, including evaluation of novel technology initiatives and prototype qualification procedures.

• Experience in the use and application of failure rate and reliability databases

• Familiarity with industry known reliability and maintainability tools/software such as Reliasoft, Windchill, or Express to perform analyses.

• Developing Reliability Allocations and Predictions (hardware and software), Maintainability Allocations and Predictions, Failure Modes, Effects & Criticality Analysis (FMECA), Testability Analysis, Failure Reporting Analysis and Corrective Action System (FRACAS), Maintainability/Built-In Test (M/BIT) Demonstration

• Supporting Reliability Centered Maintenance (RCM), Condition-Based Maintenance Plus (CBM+), and Integrated Health Management System (IHMS) programs

• Planning and executing Reliability testing, e.g., Highly Accelerated Life Testing (HALT), Highly Accelerated Stress Screening (HASS), reliability growth testing (RGT)

• Proven track record of program design, implementation, and management

• Willingness to travel domestically and internationally up to 25 % of time as and when required.

Preferred Skills

• Working with industry standards and handbooks such as MIL-HDBK-217F (Reliability Predictions for Electronic Equipment), 217Plus, MIL-HDBK-470A (Designing and Developing Maintainable Products and Systems), MIL-HDBK-338B (Electronic Reliability Design Handbook), MIL-HDBK-454B (General Guidelines for Electronic Equipment), MIL-HDBK-781A (Reliability Test Methods), MIL-HDBK-2155 (FRACAS), MIL-HDBK-2165 (Testability Handbook), Software reliability per IEEE 1633-2016.

• Broad knowledge of O&G production and processing equipment.

Job Responsbilities

• Prepare of tender activities
• Perform process design and costing (CAPEX & OPEX)
• Perform technical proposal c/w PFD, P &ID
• Tender clarification & presentation (supporting sales activities)
• Assisting project team on technical matters (process design & calculation and sequence of operation)
• Assist to source new product technical evaluation

Job Qualifications

• Diploma or Degree in Chemical/Mechanical/ Electrical Engineering
• Technical knowledge (i.e. Process Design and calculation) in membrane (MF/UF/RO/MBR), Ion Exchange (2B3T, MB, CPU, EDI) and pretreatment processes (coagulation/ flocculation, sedimentation, clarification, filtration)
• Relevant project management / plant testing & comissioning experience will be an added advantage
• Self-starter, highly motivated, driven by excellence and having an eye for details