Job Description & Requirements

UTILITY ENGINEER (LTA Tunnelling Construction)

- Report to Site Mgr/Construction Mgr/Coordination Mgr/PM/PD

- Provides coordination of construction of the project t pertaining to the utilities.

- Ensure the project needs are met without compromising the reliability of the utility system

- Ensure all utility documents are properly submitted and filed

- Conduct routine site inspections to ensure adherence to relocation plan

- Review project documentation from consultant for compliance with all relevant regulations, codes, guidelines and policies

- Schedules and attends all necessary and related pre-construction conferences for utility relocations

- Reviews utility relocation plans as compared to project construction plans to identify and correct potential utility conflicts prior to construction

- Coordinate with engineering and design consultants in order to find the best solution cost-frame time

- Liaise with construction manager to ensure that the utility work supports construction sequencing and respective deadlines are met and on schedule

- Resolve site inquiries, attending site meetings and performing site inspections during construction

EDUCATIONAL QUALIFICATION:

- Minimum Diploma/ Degree in Engineering technology

EXPERIENCE / SKILL REQUIRED

- Must have at least 5 years of engineering working experience in the relevant field (ideally with LTA projects)

- With 2 years experience in the Coordination with utility agencies for similar projects

- Good interpersonal and communication skills and able to interact with people of all levels

- Experience with utility design or utility construction activities (gas, water, sewer, telecom)

- Experience in coordinating and scheduling installation of utilities

Conduct primary technical reviews of the contractors work and ensure approvals are obtained where relevant

Evaluate and advise on electrical related design changes and non-conformances to ensure fulfilment of the requirements

Identify new business opportunities and have involvement in bids/tenders etc

Provides guidance and direction on department design guides, standards, systems, applicable engineering codes and policies

Independently applies knowledge and complies with quality program relative to assigned tasks

Oversees collection, assimilation, and management of data for engineering work

May offer other services to the clients

Provide electrical engineering and technical expertise to ensure the safe and reliable operation of electric power systems in processing facilities worldwide

Originate plans and develop strategies for power systems worldwide to ensure electrical reliability and safety in the most cost effective manner

Participate in engineering design through all phases of the process

Preparation or supervision of drawings for plant general arrangements, power single line diagrams, cable block diagrams, instrumentation loop diagrams, P&IDs, control system architecture drawings, and cable, instrument and I/O schedules at detailed design level.

Some electrical design will also be required for integration and system development of electro-mechanical systems

Assist in design and documentation of vehicle electrical architecture

Develop Project Timelines in support of Program milestones

Development and Release of Engineering Component and Assembly Drawings

Resolve Test Issues and Document Through the use of the PDCA Process

Test and certification report generation

Provides electrical engineering and project management expertise in support of projects, to ensure stated quality, operational, safety, schedule and budget objectives are met

Provide training to electricians on safety

Ensure complete and current electrical prints for all machines

Maintain documentation for all electrical components used

Organize documentation and electrical prints

Design Circuit Card Assemblies (CCA) using Altium Designer for Schematic, and layout

A working knowledge of cost estimating, code review, field investigation, report and memo writing and other similar electrical engineering related tasks

Power distribution, essential power systems including generators and UPS, Substations, transformers, metering, primary and secondary switchgear, motor control and motor control centers Life Safety including Fire Alarm system design

Prepare reports, proposals, and tender/bid submissions, budgets, project plans and other supporting documentation as required

Develop standards related to our electrical engineering practice, ensuring best practices for project delivery, and when applicable sustainable building constructions

Lighting, Lighting Control systems.

Manage internal and external stakeholders - Support and run the commercial and contractual side of projects

Evaluates and test components

Ensures design, fabrication, maintenance and repair methods/processes are developed executed in a manner, which supports all quality standards

Develops, designs low voltage (600V) and medium voltage (15kV) and high voltage (115kV) electrical distribution systems for building, industrial and utility facilities

Performs electrical system design for switchgear, switchboards, motor control centers, variable frequency drives, generators, transformers, distribution panels and various raceway systems

Designs underground medium voltage distribution systems and sizes electrical low voltage (600V) and medium voltage (15kV) and high voltage (115kV) equipment

Serves as the Engineer of Record for drawings, specifications and reports prepared under their direction

Performs field investigations, field inspections and witnesses start-up/acceptance testing activities

Works effectively in a collaborative environment with Architects, Mechanical Engineers, Civil Engineers and Structural Engineers on large multi-discipline projects

Coordinates with Mechanical, Fire, Architecture, Structural and Civil disciplines for comprehensive building design or modification.

Provide instruction on electrical drawing and using AutoCAD electrical

Work with PCB Fabrications houses to develop the stack-ups, dieletric materials, routing guidelines, and any Design For Manufacturing (DFM) suggestions

Write AFCEs

Determine project specifications

Compare equipment and select manufacturer

Work with on-shift maintenance personnel to find and fix problems on down equipment

Engineer solution to fix root cause and prevent recurring failures

Create and conduct training, if required, to prevent future downtime

Design equipment upgrades to optimize machine performance

Estimate total project costs and estimate project payback

Responsible for designing, testing, supporting, and troubleshooting components of low-voltage and medium-voltage electrical systems operating up to several megawatts

Develop system-level and/or physics-based models of components and devices in support of new technology development, project engineering, and test & evaluation

Develop and/or improve the test methods and procedures

Write test procedures and technical papers

Responsible for the design, analysis, and testing of advanced power electronic systems for both military and commercial applications

Will lead and direct small technical teams (engineers, designers and technicians) in solving complex problems

Responsible for writing requirements, specifications, and design reports

Act as an expert and advisor in power electronics engineering and electrical engineering area

Advises and directs the activities of assigned programs and/or projects to achieve technical objectives

Responsible for digital and analog design with power electronics emphasis and must be able to do system level design and analysis

Requirement:

Degree in Electrical and Electronics Engineering.

Knowledge of international codes & standards IEC, ANSI / IEEE

Significant experience in the power generation industry strongly desired

Prepare Electrical Engineering deliverables such as calculations, equipment specifications, datasheet

Working knowledge of “AutoCAD” or equivalent CAD system, MS Project, and MS Office

Track record of launching high volume electronics products, especially low power platforms

Knowledge of the PCB design process and tools experience with Cadence or Altium products

Proficiency with EE lab instruments and their use in verification and troubleshooting

Experience with ODM, JDM, or CM models of product development

Self-starter and creative problem-solver

Logicalis is an international multi-skilled solution provider providing digital enablement services to help customers harness digital technology and innovative services to deliver powerful business outcomes. Our customers span across industries such as financial services, TMT (Telecommunications, Media and Technology), Education, Healthcare, Retail, Government, Manufacturing and Professional services. Our focus is to engage in the dynamics of our customers’ vertical markets and apply the skills of our employees in modernising key digital pillars, Data centres and Cloud services, Security and Network Infrastructure, Workspace communications and collaboration, Data and information strategies, and IT operations modernisation.

Logicalis Group has an annualised revenue of over $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4 billion.

As we continue to grow as a business, our people are our key differentiator with our competitors, and developing and retaining our talent is a key priority for all of our businesses.

Accountabilities:

• Understand the customer’s network structure and become familiar with the Customer’s network implementation and support processes and procedures to ensure supporting a network with proper SLAs.
• Carry out migrations of existing setup, features, and configuration as required by the customer in a production/testing environment and help improve plans to implement new features to increase the network stability or user requirements.
• Perform IOS upgrades and patches to fix software and ensure that the environment is bug/vulnerable free by keeping system with up to date software.
• Troubleshoot production issues and network problems to fix any user related issues and work with principal vendors and customer to provide the resolution with in the proposed timelines.
• Raise equipment Return Material Authorizations (RMA’s) and to track till problem resolution and produce incident report for any severity issues that was reported by customers or end users.
• Be available for customers’ questions in assisting their needs to support network related issues and monitor customer network leveraging appropriate monitoring tools as well for special scheduled activities performed during non-business hours or public holidays due to system upgrades.
• Perform the wireless testing across customer’s different locations and identifying or fixing if there are any performance issues or slowness in network for wireless users.
• Identify the principal vendor best practices and only perform changes with customer approval to improve the security levels.
• Co-ordinate between his/her own Global Network Centre for any escalations or major issues and bridge between customer / senior resources / vendor / etc

The Individual and their Experience:

• Minimum 2-3 years of relevant experiences in network operations including wireless technologies.
• Hands on experience in fixing user issues in production environment is essential
• CCNA certified plus any other networking certifications preferred
• Basic understanding about Routing / switching protocols.
• In-depth knowledge on Stacking / L2 technologies / STP / IP Addressing.
• Proficient at performing local / remote IOS upgrades on different products and RMAs for faulty devices in production
• Good understanding about different monitoring tools like Cisco PI / PRTG / Spectrum / Syslog / etc and TCP/IP structure and IP scheme
• Strong knowledge on Wireless / ARP / MAC / L2 loops / Switching.
• Understand DNS / DHCP / Security knowledge is an added advantage.
• Eagerness and willingness to pick up & adapt new technologies and automation.

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

Job Description & Requirements

• Working hour: 9am – 6pm (Mon – Fri)

• Variable Bonus + Excellent Welfare

• Well Established Equipment Manufacturing Company

• On-Job-Training Provided

(Two-way company transport provided from Jurong East Mrt)

Job Descriptions

• Build and install offshore generator/fire pump systems;
• Onsite planning and managing of installation teams, sub-cons;
• Supporting assistant to project manager and ad-hoc;
• Project Management, including effective cost, time and quality control, manpower planning, Material Take Off & etc
• Overall project schedule and expertise to meet project objectives and deliverables;
• Involve in negotiation with subcontractors and suppliers with commercial personnel where necessary;
• Liaise with clients and consultants on project requirements and attending meetings;
• Complete assigned projects on schedule and within budget;
• Identify any potential safety risks within projects and putting in place strategies to mitigate any risks;
• Prepares for engagement reviews and quality assurance procedures;
• Ensure that Health, Safety and Environmental Safety standards are met;
• Supervision of project engineers and other project team members;
• Ensure smooth delivery of the project completion/site commissioning

Requirements:

• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Mechatronics), Engineering (Mechanical), Engineering (Electrical/Electronic) or equivalent.
• Minimum 5 years as Project Engineer in oil & gas industry, Energy industry and must have experience in M&E
• Completed medium sized projects from start to finish
• Previous project experience in relevant fields e.g. offshore projects, marine projects etc.
• Commercial knowledge
• Offshore general Safety Course for Project Manager
• Managing Work at Height Course
• Workplace Safety and Health Risk Management Course
• Possess high level of integrity, good interpersonal and strong leadership skills.
• Good communication skill
• Knowledge in energy modelling software (PVsyst), Autocad and construction modelling software
• A team player who is results and customer oriented, independent, creative, and passionate about energy generation
• Singaporeans/PRs only.

Interested and suitable candidate kindly click quick apply. Resume will be routed to HR Department. We regret that only suitable candidate will be notified.

Resident Engineer

Available job sites at various locations:

- Ang Mo Kio

- Jurong West

- Bugis

- Hougang

-West Coast

Description:

-To assist Qualified Person (Supervision) in ensuring the works is carried out in accordance to approved drawings

- Manage a team of Resident Technical Officer(s) in performing their duties on site supervision

- Liase and conduct inspection with Contractor and Consultant

- Oversee all aspects of the project and keep record of works, materials, attend meetings, keeping minutes of meetings and discussions etc.

Requirements:

- Accredited as a Resident Engineer with IES/ACES

-Degree in civil and structural engineering from a University accredited by the Professional Engineers Board, Singapore

-Literate in English and have a good knowledge to use computer softwares. E.g. Microsoft office

-Experience in LTA project sites would be a plus

Summary

Responsible for designing, developing, and maintaining automated systems to enhance production efficiency and accuracy. Strong analytical and problem-solving skills are essential.

Responsibilities

• Design, develop, and implement automated systems to improve production efficiency and accuracy.
• Work closely with cross-functional teams to identify automation opportunities in manufacturing and assembly processes.
• Program and maintain PLCs, robots, and other automated equipment.
• Develop user-friendly interfaces and dashboards for monitoring and controlling automated systems.
• Conduct troubleshooting, debugging, and performance tuning for automated equipment.
• Stay updated on advancements in automation technology to recommend and implement innovative solutions.

Requirements

• Recognized degree in Mechanical Engineering, Electrical Engineering, or Automation Engineering.
• At least 5 years of experience in industrial automation, including hands-on experience with PLCs, robotics, and sensors.
• Proficiency in programming languages such as Python, C++, or ladder logic for PLCs.
• Knowledge of Industry 4.0 principles and IoT integration.
• Strong analytical and problem-solving skills.

1. JOB DESCRIPTION

Job Title

Sales Engineer

Occupation

Sales & Marketing Engineer

Job Description & Requirements

Job Description:

We are seeking a highly motivated and skilled Mechanical Sales Engineer to join our team. As a Mechanical Sales Engineer, you will be responsible for driving sales and promoting our mechanical products and solutions to customers in Singapore. Your primary focus will be on developing new business opportunities, managing customer relationships, and achieving sales targets.

Responsibilities:

1. Develop and implement effective sales strategies to promote mechanical products and solutions.
2. Identify and target potential customers, including conducting market analysis and research.
3. Build and maintain strong relationships with existing and new customers, ensuring customer satisfaction.
4. Collaborate with the engineering team to provide technical support and product knowledge to customers.
5. Prepare and deliver professional sales presentations and demonstrations to potential clients.
6. Negotiate and close sales deals, ensuring profitable business growth.
7. Monitor market trends and competitor activities to identify new business opportunities.
8. Collaborate with the business development team to develop and execute sales plans.
9. Provide regular sales reports and updates to management.

Requirements:

1. Diploma in Mechanical Engineering or related field.
2. Proven experience in technical sales, preferably in the mechanical industry.
3. Strong customer relationship management (CRM) skills.
4. Excellent negotiation and communication skills.
5. Ability to analyze market trends and identify business opportunities.
6. Knowledge of mechanical engineering principles and products.
7. Demonstrated ability to achieve sales targets and drive business growth.
8. Proficient in presentation skills and delivering persuasive sales pitches.
9. Self-motivated and able to work independently as well as in a team.
10. Singaporean citizenship or valid work permit.

If you are a dynamic and ambitious individual with a passion for sales and mechanical engineering, we invite you to apply for this exciting opportunity. Please submit your resume, along with a cover letter highlighting your relevant experience and achievements.

We are seeking a skilled and motivated Middleware Engineer to design, implement, and maintain middleware solutions that enable seamless integration between applications, services, and systems. The ideal candidate will have a deep understanding of middleware technologies, system architectures, and enterprise integration patterns. You will collaborate with cross-functional teams to ensure the performance, reliability, and scalability of middleware platforms.

Key Responsibilities:

1. Middleware Design & Implementation:Design and deploy middleware solutions to support enterprise application integration.
   Install, configure, and manage middleware technologies, such as WebLogic, WebSphere, Apache Kafka, or Oracle Fusion Middleware.
   
2. Integration & Automation:Develop and implement integration solutions using APIs, messaging, or event-driven architecture.
   Automate middleware deployment, monitoring, and maintenance using scripting or orchestration tools.
   
3. Monitoring & Troubleshooting:Monitor middleware performance and ensure high availability and reliability.
   Diagnose and resolve middleware-related issues in a timely manner.
   Conduct root cause analysis and implement preventive measures.
   
4. Security & Compliance:Ensure middleware solutions are secure and compliant with organizational policies and standards.
   Apply patches, updates, and security configurations to middleware components.
   
5. Collaboration & Support:Work closely with application developers, system administrators, and DevOps teams to align middleware solutions with business needs.
   Provide technical support and training for middleware technologies.
   
6. Documentation:Maintain accurate and comprehensive documentation for middleware configurations, processes, and standards.
   

Required Qualifications:

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• Proven experience as a Middleware Engineer or in a similar role.
• Hands-on experience with middleware technologies (e.g., IBM WebSphere, Apache Kafka, Oracle WebLogic, or similar).
• Strong knowledge of enterprise integration patterns, API management, and service-oriented architecture (SOA).
• Proficiency in scripting languages (e.g., Python, Bash, or PowerShell).
• Familiarity with cloud platforms (e.g., AWS, Azure, Google Cloud) and containerization technologies (e.g., Docker, Kubernetes).
• Excellent troubleshooting and problem-solving skills.

Preferred Qualifications:

• Certifications in relevant middleware or cloud platforms (e.g., AWS Certified Solutions Architect, Oracle Middleware Certification).
• Experience with CI/CD tools (e.g., Jenkins, GitLab CI/CD).
• Knowledge of database systems and SQL.

Key Competencies:

• Strong communication and interpersonal skills.
• Ability to work independently and collaboratively in a team environment.
• High attention to detail and commitment to delivering quality solutions.

Role & Responsibility:

• Set design requirements based on information from internal teams and user research.
• Identify new product improvement opportunities.
• Analyze how a new product satisfies business needs and user preferences.
• Modify and revise existing designs to meet changing customer preferences.
• Work closely with product engineers to suggest improvements for products and processes.
• Present product design ideas to cross-functional teams
• Help development teams create components by ensuring its built according to design and interaction specifications.
• Maintain the design system, create, and update documentation, and library components.
• Establish design standards and principles accompanying the design system for scalability, efficiency, and consistency.

Skillset Requirements

• Proven experience in all phases of the design process including user research, copywriting, wireframing, prototyping, visual design, interaction design, and usability testing.
• Proficiency and mastery of standard design tools (Figma, Sketch, Adobe CS and XD).
• Demonstrable experience in building design systems, component libraries, and/or UI Kits.
• An intuitive eye for customer needs beyond the obvious.
• Excellent attention to detail.
• Ability to collaborate with cross-functional team members.
• Ability to collect and interpret both qualitative and quantitative feedback.
• A well-rounded portfolio of client work, demonstrating a strong understanding of client objectives.
• Ability to effectively communicate and persuade around design concepts.
• Passion for design, not satisfied with the status quo and always thinking of ways to improve.
• Creative problem-solving skills.
• Dynamic, creative personality, effective at engaging and influencing a variety of audiences.
• Provide assistance to product engineers when needed.
• Recommend new tools and technologies by staying abreast of the latest trends and techniques.

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

Roles & Responsibilities

• Site & office project management and daily operations including inspections, handover, site measurements, project management.
• Handling technical and engineering issues.
• Overall project planning, scheduling, monitoring and updating to meet project completion targets.
• Liaison and meeting with client's representatives, relevant authorities and consultants.
• Site co-ordination, monitoring and report work progress.
• Responsible for timely submission of reports and completion of projects including tender/submission with target dates
• Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of projects
• Conduct site check on the repair works in building structures, in accordance with approved methods and procedures proposed by the Qualified Person, specifications and instructions.

Requirement:

• Degree or Diploma in Civil/ Structural Engineering or equivalent
• Incumbent with working experience on Singapore LTA / Rail project preferred
• Possessing 2 years of working experience in the related field will be advantageous.

Job Description

• Manage a team of technical supervisors on site to ensure that all site activities comply with the regulations and client's requirements.
• To report to C&S QP, works closely with the regulatory authorities and contractors to provide supervision on site, resolve all site issues and ensure timelycompletion of the projects.
• To be competent in carrying out supervision of structural works by identifying any non-conformity of contractor's works on site. The appointed person must havethe strong ability to interpret the drawings and contract documents on works to be carried.
• Appointed person possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurancesystem.
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM.
• To manage the site supervisors with respect to C&S engineering works, architectural and MandE engineering works.
• To attend site, progress, variation and coordination meetings Interpret drawings and contract documents on works to be carried.

Job Requirement

• Recognized Degree in Civil/Structural Engineering acceptable for registration with the PE Board, Singapore.
• Accredited with IES/ACES with a valid Resident Engineer Practicing.
• Minimum 8 years’ experience preferably in steel and precast building construction.
• Must be familiar with local Regulations/Codes for Civil and Structural related to building projects.
• Must have experience in condominium project.
• A good team player and experience in leading a team of Resident Technical Officers.
• Carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM.
• Supervision of C&S and Architecture works by identifying any non-conformity of contractor’s works on site.
• Strong ability to interpret the drawings and contract documents on works to be carried.
• Supervision and manage site supervisors with respect to C&S and Architecture Work.
• Ability to resolve site and technical issues, prepare and document detailed site progress reports.

You will be responsible for bringing process automation solution to our customers and show them how our products can simplify and integrate complex systems for higher productivity.

Responsibilities & Duties

· Identify and develop potential new customers

· Provide support and further develop existing customers.

· Marketing, promoting and selling of products.

· Provide advice on best solution and product to customers.

· Analyse competitors and market trend.

· Prepare quotations.

· Meeting of sales target and plan.

· Perform other duties as assigned.

Requirements & Skills

· Minimum Diploma in electrical / engineering.

· Experience in Semicon / PCBA will be an added advantage.

· Fresh graduates are welcome.

· Strong communication and sales skill.

· Team player.

We offer

· A friendly and informal working environment.

· A continuous process for learning, development, and career growth.

· Professional and motivated team members.

· Competitive remuneration package.

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner.

• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other).

• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications.

• Assess potential risks, materials and costs.

• Provide advice and resolve creatively any emerging problems/deficiencies.

• Oversee and mentor staff and liaise with a variety of stakeholders.

• Handle over the resulting structures and services for use.

• Monitor progress and compile reports in project status.

• Manage budget and purchase equipment/materials.

• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required.

• Working with a team of fellow engineers and construction crews to organize and complete projects.

Site Engineer – Mechanical maintenance

We need an independent, self-motivated site engineer for facilities construction projects with the follow qualification and experience.

1. Bachelor degree / Diploma in Mechanical engineering

2. Should have worked in a Facilities project for Semiconductor or Pharmaceutical or Chemical plants

3. Four to five years site experience is required.

4. Work experience in the plant modification or new built in the above industry is preferred.

Drafter Job Description:

• To prepare M&E drawings for submission
• Following specifications and calculations to create various technical drawings, ability to draw manually favorable, but not essential
• To maintain all the documents in relation to the drawings in order as per the ISO procedure
• To draft Electrical & Mechanical engineering drawing in Autocad / SolidWork as well as 3D modelling tools
• Assist Project Engineer and Project Manager in understanding the project needs and transform those inputs into the drawing
• Analyse any drawing issues or clashing and highlight to the relevant personnel
• Assist on documentation during conceptual and detailed design development stage
• Conduct self-check on drawing to ensure accuracy and quality and make update as needed
• Provide support to production and sales team by clarifying design specifications
• To provide design and drafting support to the Production and Sales Department
• To prepare and circulate all shop drawing to the Production Department
• Any other works as directed

Research Job Description:

• Identify new research materials, tools, and subscriptions that enhance research capabilities
• Recommend and implement improvements to research processes and tools
• Plan and perform experiments and surveys, oversee new product / raw materials and suppliers
• Collating data from different sources, record and analyzing information and draw inferences and conclusions
• To manage raw material sourcing, research and development on products in order to ensure compliance to specifications and regulations, fulfill market and customer requirement
• Ensure records are properly maintained and easily accessible for tracking issues
• Carry out assignments as required by management
• Provide support in preparing presentation materials and reports and presenting research results to the committee, executives, and other relevant parties
• Work closely with Directors and other team members to understand research needs and objectives

Qualifications:

• Diploma in Mechanical or Electrical Engineering or equivalent
• Relevant working experience in an M&E Consulting firm is an added advantage
• Strong understanding of technical drawing and modeling
• Experienced working in construction industry is must especially M&E
• Proficient with Microsoft Word, Excel, Powerpoint Excel, AutoCAD, SolidWorks
• At least 2 - 3 years of working experience in related field is required for this position
• Meticulous, Organized, Energetic and Positive Minded
• Strong analytical and problem-solving skills
• Ability to work independently as well as part of a team
• Good communication skills, both written and verbal
• Attention to detail and a passion for innovation
• Proficiency in research tools and software
• Strong analytical skills with the ability to interpret complex data

职位描述:

• 准备提交的机电图纸
• 根据规范和计算绘制各种技术图纸，具备手动绘图能力者优先，但并非必须
• 按照 ISO 程序维护与图纸相关的所有文件，使其井然有序
• 使用 Autocad / SolidWork 以及 3D 建模工具绘制机电工程图纸
• 协助项目工程师和项目经理了解项目需求，并将这些输入转化为图纸
• 分析任何图纸问题或冲突，并向相关人员强调
• 在概念和详细设计开发阶段协助编制文件
• 对图纸进行自我检查，确保准确性和质量，并根据需要进行更新
• 为生产和销售团队提供支持，澄清设计规范
• 为生产和销售部门提供设计和绘图支持
• 准备并向生产部分发所有车间图纸

研究工作描述:

• 确定新的研究材料、工具和订阅，以提高研究能力
• 建议并实施研究流程和工具的改进
• 计划并执行实验和调查，监督新产品/原材料和供应商
• 整理不同来源的数据，记录和分析信息，并得出推论和结论
• 管理原材料采购、产品研发，以确保符合规格和法规，满足市场和客户要求
• 确保记录得到妥善保存，并便于追踪问题
• 执行管理层要求的任务
• 协助准备演示材料和报告，并向委员会、高管和其他相关方介绍研究成果
• 与总监和其他团队成员密切合作，了解研究需求和目标

任职资格:

• 机械或电气工程文凭或同等学历
• 有机电工程咨询公司相关工作经验者更佳
• 精通技术制图和建模
• 必须有建筑行业工作经验，尤其是机电工程方面的经验
• 精通 Microsoft Word、Excel、Powerpoint Excel、AutoCAD、SolidWorks
• 要求至少有 2 - 3 年相关领域的工作经验
• 一丝不苟、有条理、精力充沛、心态积极
• 具有很强的分析和解决问题的能力
• 既能独立工作，又能融入团队
• 良好的书面和口头沟通能力
• 注重细节，热衷创新
• 熟练掌握研究工具和软件具有很强的分析能力，能够解读复杂的数据
• 工作类型 兼职、长期、合同

Job Description:

• Develop and maintain Android applications.
• Collaborate with designers and backend developers to implement features.
• Write clean, maintainable, and efficient code following Android best practices.
• Participate in code reviews and provide constructive feedback.
• Troubleshoot and debug issues in production and development environments.
• Ensure applications are optimized for performance and reliability.

Requirements:

• Bachelor’s degree in Computer Science, Engineering, or a related field.
• 1-3 years of experience in Android development.
• Proficiency in Kotlin and/or Java for Android development.
• Familiarity with Android SDK, Jetpack components, and design patterns.
• Knowledge of RESTful APIs and third-party libraries.
• Strong problem-solving skills and attention to detail.

Requirements:

• Diploma / Degree in Civil / Structural or its equivalent.
• Preferably 2-3 years’ experience in related field.

Responsibilities:

• To resolve all technical and non-technical issues.
• Assists Site Manager/Project Manager in verifying monthly progress reports, claims / EOT claims.
• Oversees the daily construction activities at the work site to meet the project progress and quality goals
• Supervises subcontractors / direct manpower to complete the project within the given budget and time frame.
• Perform quality inspections.

COMPANY DESCRIPTION

We are one of the largest one-stop Underground Utilities Infrastructure companies based in Singapore. We provide Underground Utilities Infrastructure construction and maintenance, sewer pipeline rehabilitation, road and airfield construction and maintenance as well as asphalt pre-mix production and construction waste recycling.

RESPONSIBILITIES

• Developing in-depth understanding of project scope and particulars i.e. timeframes, financials, outcomes, plan and manage team goals, project schedules and new information.
• Communicate with clients to identify and define project requirements, scope and objectives, regularly schedule and attend meetings between stakeholders, clients, employees and the Project Manager.
• Getting necessary approval (NCE, LTA Approval, NPark and Special Approvals) for the site teams, and special approvals like GTP, MPA and LPB clearances and request for, TPOM Officers coordination for standing supervision.
• Maintain records and renew any expired approvals/permits that are required (C&G NCE, Telecom, GTP, LPB LOAs).SP Officers coordination regarding the following schedule of works (ROA Schedules, Reinstatement) for Distribution Projects.
• Coordinating with LTA and NPark officers regarding the ROA queries raised by authorities, and get approval on time.
• Providing support to project managers and operation team when requested.
• Participate in project design meetings and propose improvements if necessary, and sharing relevant documentation and reports with project teams.
• Communicate with clients to identify and define project requirements, scope and objectives.
• Plan and manage team goals, project schedules and new information.
• Adhere to budget by monitoring expenses and implementing cost-saving measures.
• Supervise current projects and coordinate all team members to keep workflow on track.
• Regularly schedule and attend meetings between stakeholders, clients, employees and the Project Manager.
• Direct project correspondences by preparing and reviewing project proposals, meeting minutes and emails.
• Providing support to project managers and operation team when requested.
• Being point of contact for various working groups.
• Manage project-related paperwork by ensuring all necessary materials are current, properly filed and stored.
• Perform other duties or tasks as assigned by immediate supervisor or HOD.

• Degree in Civil Engineering recognized by Singapore Professional Engineers Board (PEB)
• Minimum 3 year of experience in constructions or civil engineering
• Those with experience in underground utilities especially gas pipes will be advantageous
• Possess excellent interpersonal and communication skills
• Service-oriented client relationship and people
• Self-motivated and able to work independently
• Preferably possess a valid Class 3 license

• 6 days work week
• Working location: Sungei Kadut (with company transportation provided at Woodlands and Kranji MRT Station)

Other Benefits

• Provided company lunch bus
• Medical Teleconsult
• Portable Medical Benefit Scheme (PMBS) - additional monthly contribution direct to Medisave account
• Medical benefits (applicable for dental and company provider health screening)

Why Join Us

• Opportunity to work in a dynamic and fast-paced environment
• Engage in diverse tasks that keep each day unique and interesting
• Be part of a team that values communication, efficiency, and security
• Supportive work culture with opportunities for growth and development

The title holder will manage ACMV/HVAC retrofit project works locally. He/She will report directly to the project manager based in Singapore.

RESPONSIBILITIES

• Assist project manager in monitoring and implementing overall project.
• Liaise with customer on project delivery details and coordinate installation schedules.
• Plan and manage overall project deliverables in a timely basis.
• Perform inspection on incoming materials received at site.
• Manage subcontractors work schedule, inspect work quality against contracted expectations.
• Check for defects in work and work with contractors to rectify defect list promptly.
• Verify progress claims against work delivered.
• Test and commission system as required.
• Upkeep level of customer satisfaction and promptly resolve any feedbacks/complaints.
• Prepare OMM and drawings for hand over to customer.
• Prepare risk assessment, method of work and complete necessary permits applications.
• Attend regular update meetings with customer.
• Conduct energy audits for project sites

REQUIREMENTS

• Degree in relevant Engineering disciplines
• Flexible, analytical and efficient in problem solving
• Excellent planning and organizing skills
• Able to work independently within a team environment
• 3-5 years of working experience in project management or related field
• ACMV/HVAC knowledge is advantageous

Role:DataCenter Engineer

JD:

Dedicated as well as hard working individual with the intercommunication skills to work at all the level of organization.
• Possess an in-depth knowledge of data center infrastructure technology and components for installation.
• Working knowledge of Data Centre Mechanical & Electrical for operation.
• Vendor management.
• Extensive knowledge garnered working as a Data Center Operator
• Thorough knowledge of Data Center Operations with strong knowledge of Operations methodology.
• Experience in eye-ball checking of system faults and failures
• Good technical knowledge on Data Centre monitoring tools.
• Strong written and excellent communication skills."

Must have Talent / Skills

Ever work in Data Centre

"• ITIL Process Knowledge
• WOG experience

KEY DUTIES & RESPONSIBILITIES

• Produce commissioning sequence & commissioning plan as per project requirements
• Liaise with vendors , contractors to prepare testing scripts required for data center equipment and services commissioning and submit them to related authorities
• Produce Testing and commissioning schedule and analyze commissioning critical path
• Laise with construction team for commissioning requirements to ensure commissioning milestones are achieved
• Laise with equipment vendors with their testing equipment set up and their requirements to ensure they can be accommodated on site for testing.
• Ensure and track the commissioning activities are been carried out as per schedule
• Track , record and update of commissioning status per weekly basic
• Chair weekly commissioning meetings with vendors , suppliers , contractor and consultant
• Issue weekly commissioning reports and commissioning and scripts tracker status
• Log commission issues and resolve them together with vendors/contractors and suppliers
• Lead Testing and Commissioning FAT, SAT activities with vendors , contractors and consultants.
• Consolidate and validate the testing reports and document them per day to day basic
• Arrange logistic Heaters, Data Loggers , PQA , Test PC, temporary CAC , HAC requirements for Heat Load Test & IST.
• Support commissioning agent for HLT and IST by leading all vendors , suppliers and contractors.
• Close out of all T&C issues and hand over the Documents as part of OMM.

JOB REQUIREMENTS

• Diploma or Bachelor’s Degree in computer science, information technology, engineering, or related field.
• At least 3 years of relevant experience in data center testing and commissioning or a similar role.
• Recent graduates are encouraged to apply. We are open to tailoring the role to match your strengths and career goals.
• Knowledge and skills in data center systems and equipment, such as server, storage, network, power, cooling, fire protection and security.
• Ability to work independently and in a team, with good communication, problem-solving, and analytical skills.
• Able to travel for oversea (SEA region) assignment if required

This candidate will responsible for the development of IOT products and its full product cycle from research to production. He/she will be in a team of different expertise to research, design and develop the product with cooperation from various external vendors/suppliers.

Responsibilities

· Design electronics including schematics and PCB layout for various new and legacy product

· Research and Source for components, equipment and tools related to new Product

· Collaborate with external vendors/suppliers to inspect and determine suitable components

· Build and assemble prototypes and troubleshoot issues

· Support firmware design and optimize development of the product

· Support electronics issue in product manufacturing

· Formulate test method and collaborate with engineers/technician to perform them

· Documenting development process and design at every product cycle.

· Any other duties as may be assigned.

Requirements

· Diploma or Degree in Mechatronics, Electronics, Robotics, Embedded systems or related fields

· No experience needed

· Firm grasp of Electronics design is a must

· Knowledge of Microcontroller and Microprocessor is a plus

· Knowledge of C/C++ is a plus

· Outstanding analytical and problem-solving skills

· Able to start work within short notice will be an advantage

Technical Sales for Precision Engineering

1 to 2 years sales experience in Engineering Products

Engineering Products examples: Bearings, Linear Guides, Actuators, Linear Motors, Gantries etc

Industries: Semiconductor, Biotech, Renewable energy

Use of Microsoft Office and ERP, CRM will be good

Willing to travel if required

Positive attitude, ability to interact with both internal and external parties

Ability to learn quickly, and problem solve if required

Responsibilities:

• Install, configure, and maintain server operating systems (Windows/Linux/VMWare)
• Deploy, configure, manage, and troubleshoot the following software/hardware - Active Directory, Exchange Server & Exchange Online, VMware ESXi, SAN Storage & Backup
• Perform routine system administration duties
• Monitor servers and troubleshoot issues
• Provide additional support when necessary (eg. backup and storage functions)
• Perform proper documents for all processes
• Recommend solutions and ensure all IT issues have been corrected, and maintain records of work performed
• Provide technical support across the company, including Singapore, regional offices, and retail stores
• Provide technical support to server and network infrastructure and perform regular upgrades to ensure systems remain updated
• Troubleshoot system failures or bugs, and provide solutions to restore functionality
• Assist with any ad-hoc tasks as assigned

Requirements:

• Minimum Diploma in Computer Science, Information Technology, or a similar field
• At least 2-3 years of working experience in the related field
• Experience in configuring, monitoring, and troubleshooting systems
• Able to communicate effectively in both oral and written aspects
• Able to work independently and in a team
• Possesses analytical skills and works well in a fast-paced environment

Our client, a well-known company, is looking for candidates for the position of Associate Engineer.

Responsibilities:

1. Supporting the production line
2. Ensuring the machines are running smoothly
3. Basic troubleshooting and housekeeping maintenance
4. Other ad-hoc duties

Requirements:

• Candidates must possess a diploma in any engineering related field
• Candidates must be comfortable with a standing job

​​​​​​​
Thank you for your application but we regret that only shortlisted candidates will be notified.

PERSOLKELLY Singapore Pte Ltd | EA License No. 01C4394

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.