As a Senior Equipment Engineer/Equipment Engineer in the NTI, you will be expected to support R&D activities associated with rapid deployment of First-of-Kind equipment, the CIP hardware evaluations and managing on the timeline needed to deploy in current technode/next advance technode on time. Good team spirit and good collaborations working is needed with various stakeholders including (not limited to) facilities/fab support/Gas & Chemical/EHS/F4/F10/Central team etc with various equipment setup and improvement work necessitated thereof as well as to ensure extended engagement with F4 on the upcoming First-of-Kind equipment in upcoming technode. Expected to work independently with minimal direction and complete projects in a timely manner and achieve set objectives.

Responsibilities
• Install equipment and/or CIP hardware for evaluation by the process development team to enable early introduction, maturity, and adoption for current and next node of 3D NAND technology.
• Work with the Fab layout and facility team to ensure smooth and on time installation and operation of the equipment.
• Work with process development team to quantify benefits of equipment/CIP hardware.
• Develop and optimize existing equipment hardware to meet the productivity requirements of advanced 3D NAND parts.
• Participate with Boise TD equipment development peers on technology choices for the upcoming nodes and able to translate future technology needs into clear equipment requirements.
• Identify disruptive equipment early, work with manufacturing and Boise TD to identify viable evaluation path forward in manufacturing.
• Design and implement advanced equipment monitoring and control methodologies.
• Lead team or sites or suppliers on complex projects in focused meetings with end goal of maturity an equipment technology in record times for technical advantage, cost and productivity.
• Serve as a technical expert within Micron, provide advice and recommendations to senior management on improvements from equipment development. Lead and initiate innovation projects through patents/technical papers.
• Identify and resolve safety hazards; follow safety procedures including lockout, chemical safety, lifting techniques and ergonomically correct methods.

Requirements:
• A minimum of 2-3 years of experience in the semiconductor industry in the area of equipment engineer roles.
• In-depth understanding of the equipment operation, working principles, troubleshooting and tool installation procedure is a must.
• Exposure to R&D equipment transfer and ability to develop/optimize equipment hardware design is preferred.
• Communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Self-motivated and adaptable to Micron’s fast paced, demanding and dynamic work environment; flexibility to work for extended hours, as required.
• Excellent oral and written communication skills with ability to convey the message clearly and sharply both locally and globally.
• Excellent ability to prioritize and manage multiple projects simultaneously; efficiently utilize available resources or seek peers’ and/or management help to get over the roadblocks to drive to solutions.
• Encourage and enforce safe, compliant behavior through periodic communications and the performance management process.

GJS for this position: E2 and above

Location: Fab10N

Closing Date: Until filled

As a NAND CMOS Device Engineer, you will help set the direction for current and future CMOS technology for Micron’s NAND Memory Technology Roadmap!

You will work with the Design Team to set electrical targets and define transistor structures to meet these targets. You will guide the device technology development and be in close relation with Process Integration, Design Engineering, Design, Design Rules, Reliability, Transistor Modeling, TCAD (Technology Computer-Aided Design), and Parametric Test, to name a few! In addition, you will ensure that the developed technology is manufacturable and highly yielding and that these considerations are designed into the technology from the start.

Together with your peers, you craft and implement our NAND-CMOS roadmap and make sure to align to product roadmaps

• You give directions on how to improve our device portfolio, both in performance and cost effectiveness
• You define, execute, and analyze silicon experiments for future device generations
• Interface with Design Engineers to define transistor targets, deliver transistor models, and optimize critical layout constrained Design Rules
• Work with TCAD simulation group to develop strategies for transistor structures to meet targets
• You strive to ensure that transistor models are correctly targeted to anticipate final silicon
• Define electrical test structures for transistors, isolation, design rule verification, and process monitoring
• Highly motivated to ensure transistors are developed meeting the required reliability standards
• You take initiative to collaborate with Manufacturing to ensure transistors are performing as expected and to debug yield/reliability issues
• You foster and enable a collaborative working style and team spirit by mentoring less experienced colleagues

Minimum Qualifications:

• MS/PhD in Electrical Engineering or related field, PhD in Semiconductor Device Technology preferred
• 5 plus years industry experience in the field of CMOS device design, simulation, characterization
• Experience in developing advanced logic transistor technologies
• Experience in developing Analog FETs operating at higher Voltages
• Preferred: Experience in the field of High Voltage applications, reliability, characterization, device development
• Understanding of analog design concepts
• Good presentation skills
• Excellent team and mentoring skills

Develops new or modified process formulations, defines processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products. Involvement may begin at any step from pilot plant to full-scale manufacturing. Coordinates design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods. Compiles and evaluates test data to determine appropriate limits and variables for process or material specifications. May conceive and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes.

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Field Service Engineer to be part of their team for ongoing transformation projects. They are located at Jurong East.

Job Requirement:

• Perform verification, calibration, and preventive maintenance (PMs) in accordance with in-house Metrology SOPs.
• Maintain calibration and qualification tools, ensuring timely upkeep.
• Coordinate with and oversee External Third-Party (3P) vendors for calibration, PMs, qualifications, and repairs.
• Ensure External 3P vendors meet Customer off-site and on-site qualifications prior to service execution.
• Respond promptly to ad-hoc service requests from Laboratory End Users, adhering to the agreed Service Level Agreement (SLA).
• Recommend appropriate inventory levels for critical equipment parts and tools to minimize downtime and aid budget planning.
• Accurately document and manage service records, training, and asset information in the in-house Asset Management system.
• Facilitate clear communication and coordination among customers, vendors, and internal teams to ensure smooth service delivery.

Qualifications and Criteria:

• Diploma or bachelor’s degree in Science or Engineering, ideally in Electrical or Mechanical Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Ptd Ltd

EA License No: 19C9682
Reg No: R24122162 | LAI CHAI LI

As a Senior Equipment Engineer/Equipment Engineer in the NTI, you will be expected to support R&D activities associated with rapid deployment of First-of-Kind equipment, the CIP hardware evaluations and managing on the timeline needed to deploy in current technode/next advance technode on time. Good team spirit and good collaborations working is needed with various stakeholders including (not limited to) facilities/fab support/Gas & Chemical/EHS/F4/F10/Central team etc with various equipment setup and improvement work necessitated thereof as well as to ensure extended engagement with F4 on the upcoming First-of-Kind equipment in upcoming technode. Expected to work independently with minimal direction and complete projects in a timely manner and achieve set objectives.

Responsibilities
• Install equipment and/or CIP hardware for evaluation by the process development team to enable early introduction, maturity, and adoption for current and next node of 3D NAND technology.
• Work with the Fab layout and facility team to ensure smooth and on time installation and operation of the equipment.
• Work with process development team to quantify benefits of equipment/CIP hardware.
• Develop and optimize existing equipment hardware to meet the productivity requirements of advanced 3D NAND parts.
• Participate with Boise TD equipment development peers on technology choices for the upcoming nodes and able to translate future technology needs into clear equipment requirements.
• Identify disruptive equipment early, work with manufacturing and Boise TD to identify viable evaluation path forward in manufacturing.
• Design and implement advanced equipment monitoring and control methodologies.
• Lead team or sites or suppliers on complex projects in focused meetings with end goal of maturity an equipment technology in record times for technical advantage, cost and productivity.
• Serve as a technical expert within Micron, provide advice and recommendations to senior management on improvements from equipment development. Lead and initiate innovation projects through patents/technical papers.
• Identify and resolve safety hazards; follow safety procedures including lockout, chemical safety, lifting techniques and ergonomically correct methods.

Requirements:
• A minimum of 2-3 years of experience in the semiconductor industry in the area of equipment engineer roles.
• In-depth understanding of the equipment operation, working principles, troubleshooting and tool installation procedure is a must.
• Exposure to R&D equipment transfer and ability to develop/optimize equipment hardware design is preferred.
• Communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Self-motivated and adaptable to Micron’s fast paced, demanding and dynamic work environment; flexibility to work for extended hours, as required.
• Excellent oral and written communication skills with ability to convey the message clearly and sharply both locally and globally.
• Excellent ability to prioritize and manage multiple projects simultaneously; efficiently utilize available resources or seek peers’ and/or management help to get over the roadblocks to drive to solutions.
• Encourage and enforce safe, compliant behavior through periodic communications and the performance management process.

GJS for this position: E2 and above
Location: Fab10N
Closing Date: Until filled

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a QC Coordinator Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Responsibilities:

• Conduct quality control audits.
• Organize pre-inspection meetings with clients.
• Create Project Inspection and Testing Plans.
• Draft Project Inspection and Testing Procedures.
• Address client feedback on QC documents.
• Coordinate and schedule QC activities, including inspection notices and factory acceptance tests.
• Manage coordination and scheduling of QC procedures, reports, and documents.

Requirements:

• Minimum of Bachelor Degree in Engineering or Quality Management
• Minimum of 5 years experience in Quality Control function.
• Experience in the Oil and Gas or offshore and marine industry
• Proficiency in metal welding inspection and piping system testing and inspection

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

• Performs inspections, testing and troubleshooting on electrical & mechanical of marine hydraulic systems.
• Performs preventive maintenance procedures on equipment.
• Carry out repairs on various marine products, both mechanical & electrical systems on Marine and offshore installations.
• Prepare reports from attended jobs.
• Participate in vessel dockings and work at shipyards.
• Adhoc duties as assigned.

Requirements:

• Diploma in Mechanical/ Electrical or Marine Engineering.
• Knowledge in PLC based control systems and/or Hydraulic systems.
• Automation or instrumentation experience an advantage
• Prefer 2-3 years of experience in Marine Hydralius System.
• Possess good initiative, customer oriented and action oriented.

West/Tuas Area (Tpt Pick up at CCK MRT /Boon Lay Mrt)

5 days work week

European MNC

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd

License No: 06C3745

Attention: Audris Teo / EA Personnel No: R1102063

• New Product process design and line setup.
• Understand SAP concept and align process design
• Work closely with local and HQ (Japan) designers on product change requirements, plan with the local group of members.
• Draft the implementation schedule to meet target date, disseminate and finetune the scheduled with production PICs for the implementation to be carried out smoothly.
• Follow up with related members and enforce the usage of systems developed for operation change tracking.
• Understand key functions and product master setting rules of ERP (SAP) system, process-related inline systems, traceability requirements, to align the process design with the systems.

Requirements:

• Diploma/Degree in Engineering Electrical & Electronics.
• Prefer 2 year(s) of working experience in the related field in the PCB manufacturing environment.
• Good statistical and analytical skills.
• Good communication, planning and coordination skills.
• Entry level are welcome as training will be provided.
• Travelling to Batam Factory and staying for project (min. 2weeks to max 2 months stay per visit depending on project requirements.

Electronics Manufacturing Industry

East Area/Bedok Area

5 days work week

Interested candidates, please forward a detailed resume to [email protected]

Tempserv Pte Ltd
License No: 06C3745
Attention: Audris Teo / EA Personnel No: R1102063

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Assurance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

(Gov project, stable role) x 8

Singaporean Only, security clearance required

Salary range:

• Basic Salary $2800 - $3600 + Site Allowance + Standby Allowance + Other Benefits

Responsibilities:

• Perform Preventive & Corrective maintenance work on IT Network system involving fault troubleshooting, diagnosis & replacement of equipment/ component at permanent sites
• Perform testing of equipment
• Provide troubleshooting to technical problem on communication system

Requirements:

• Higher Nitec/ Diploma in Electrical/Electronics, Communications/ Computer Engineering or InfoComm Technology
• Training will be provided
• Able to perform standby duties (based on roster)

Additional Information:

• Stable role, Government Project (Singaporean Only)
• Working hours: Office Hours (Mon – Fri)
• Location: Near Choa Chu Kang MRT

Interested applicants simply email your resume to: [email protected]

We regret to inform that only shortlisted applicants will be notified.

Our client is a well-established MNC, market leader in the IT industry. Due to their current expansion plan, they are looking for an Information Security Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities:

• Handle post-sales activities of related products and solutions.
• Engage in the implementation of large-scale projects.
• Offer on-site services, including deployment, testing and preparation of documentation.
• Provide technical assistance to maintain high levels of customer satisfaction.
• Troubleshoot customer inquiries by leveraging existing knowledgebase resources and resolving known issues.
• Be available for standby support to manage 24/7 maintenance calls.
• All other adhoc duties as assigned.

Requirements:

• Minimum diploma in IT / Cybersecurity or other related field of studies.
• Minimum 2 years’ IT support experience.
• Certified CCNA or CCSA is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Summary

You will be working with our client who specialises in the healthcare and technology space. Our client is seeking a skilled Test Engineer with hands-on experience in Microsoft Dynamics CRM 365. The ideal candidate will have a strong background in testing enterprise applications, particularly Dynamics CRM, and ensuring the quality and functionality of business-critical system. The role requires an individual with a thorough understanding of testing methodologies and best practices.

Responsibilities

• Analyse business requirements and translate them into detailed test cases for Microsoft Dynamics CRM 365 applications.
• Create, review, and maintain comprehensive test plans, test scenarios, and test cases based on functional and non-functional requirements
• Execute test cases manually, including functional, integration, and regression testing for Microsoft Dynamics CRM modules.
• Identify, document, and track defects/issues found during testing in defect management tools like Jira, Azure DevOps, etc.
• Work in close coordination with business analysts, developers, and stakeholders to understand the functionality of CRM modules and ensure proper testing coverage.

Requirements

• Bachelors degree in Computer Science or equivalent
• At least 4 years of experience in manual testing, with at least 2-3 years focused on Microsoft Dynamics CRM 365
• Strong knowledge of Dynamics CRM functionality, including sales, marketing, service, and custom modules.
• Familiarity with SQL and the ability to query databases to validate data within CRM systems.
• Understanding of software development life cycles (SDLC) and testing methodologies (Waterfall, Agile).
• Experience with end-to-end testing of complex business applications and integrations
• Able to conduct Test Readiness Review (TRR) to ensure readiness of the test phase.
• Experience in API testing using postman.
• Basic knowledge of automated testing tools and scripting is an advantage.
• Experience in testing integrations with other Microsoft technologies (e.g., Power Platform).
• Experience in UAT coordination and user training.

If you are interested in this role and would like to discuss the opportunity further please click apply now or email Chew Kai-Xinn at [email protected] for more information.Only shortlisted candidates will be responded to, therefore if you do not receive a reply within 14 days please accept this as notification that you have not been shortlisted.Morgan McKinley Talent SolutionsMorgan McKinley Pte Ltd EA Licence No: 11C5502EAP Registration No: R2196712EAP Name: Chew Kai-Xinn

• 5 days, Jurong West, Transport
• $3800 - $4500, AWS, performance bonus
• Medical/dental benefits

Job Description

• Review engineering drawing & specifications, design and execute engineering experiments, calculations and statistical control for new products & processes.
• Perform trouble shooting & analysis of production & process issues for cleanroom & non-cleanroom operations. Perform process redesign where required.
• Support qualification & setup (where applicable) of new materials, recipe, processes & system application for both cleanroom & non-cleanroom operations.
• Perform new equipment & materials validation using standards involving IQ, OQ & PQ methodology.
• Source new suppliers, qualify specifications & perform cost estimation to price out project expenses.
• Support new business projects & technology implementation.
• Research, Procure, Qualify & Implement new solutions (equipment or materials).

Job Requirements

• Possess a Diploma or Degree in Engineering
• Minimum 2 years of working experience
• Knowledge on end to end processes from technical/material qualification, process qualification to manufacturing & supply chain logistics engineering.
• General awareness of Manufacturing Systems e.g. CAD, Manufacturing Execution System, ERP & Technical Publications.
• General experience with work flow Simulation software & Robotics applications e.g. Flexsim & UiPath.
• Experience with write-ups on work procedure workflow & instructions for production process.
• Ability to apply ISO13485, GDPMDS & other ISO standards to existing operations & into new businesses.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Overall in-charge for PMIC, Mixed Signal & RF IP Test characterization, Test code development and Test Platform Enablement.
• Liaise closely with test engineering team and production support team to drive debug activities and data correlation with ATE.
• Deliver detailed status reports at each phase, test limit (guard band) generation and summary reports.

Requirements:

• Degree in Electronics/Electrical Engineering or equivalent.
• At least 5 years of characterizing mixed signal IP & RF experience with lab equipment such as Spectrum Analyzer, Digitizers, High Speed Serial Data analyzers, etc.
• Proficient in Embedded C/C++, LabVIEW, FPGA development.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Begin your engineering career by enrolling into our 26-month structured Career Advancement Programme (CAP).

This programme sets you on the pathway to become a Accredited BIM Professional for Digital Delivery Management. Your time on our programme counts towards the work experience requirement. Digital skills are crucial in the Built Environment sector. BIM is the way to digitally create and simulate building and infrastructure models before the actual construction.

AcePLP welcomes fresh graduates and mid-careerists from Architectural, Mechanical, Electrical, Civil, BIM, Mechatronics and Engineering with diploma/degree to enrol in our CAP. AcePLP’s 26-months CAP aligns you to the Built Environment career trajectory. It is the most established work-study programme in Singapore with 20-years proven track record of producing thousands of engineering professionals in the Built Environment. CAP Alumni have made valuable contributions in the development and management of digital models for buildings and infrastructure. You will have opportunities to learn on-the-job alongside industry experts and build your expertise after an initial 2-months classroom training with us.

Why Join Us?

We have the most established Work-Study Programme in the Built Environment sector with over 20 years track record.

• An intensive free two-month technical BIM and CAD training will be provided.
• Learn on-the-job as you work across building and infrastructure projects in Singapore with guidance from our experienced Trainers and Resource Managers.
• Build your expertise and widen your professional network with us through our large database of clients, project assignments and alumnus.
• This program counts towards the fulfilment of pre-requisite for the SUSS Bachelor of Building and Project Management and NUS Bachelor of Technology in Engineering, as well as towards the Digital Delivery Management (BIM) accreditation.
• Sponsorship from AcePLP for further studies are available subject to terms and conditions apply.
• Obtain accreditation for your DDM/BIM skills and Specialist BIM Diploma and/or building related Degree after 6 years in the building industry.

Am I an Eligible Candidate?

• Entry level candidates and mid-careerists may apply.
• Strong interest in pursuing a career in the Built Environment Sector.
• Degree/Diploma in Built Environment-related fields: Architecture, Mechanical, Electrical, Civil, Structural Engineering, Green Building & Sustainability, Project or Construction Management and Facilities Management.
• Other qualifications considered: Any engineering subjects, Intelligent Building Technology, Graphic Arts, Visual/Product/Interior Design, Landscape Architecture, Environmental Engineering, Mechatronic, Aeronautical, etc.
• Professionals with prior experience in BIM may request for a skills test to fast-track their development at AcePLP.

You can apply here: https://aces.aceplp.com.sg/apply/nt/

Responsibilities:

• Plan, design and administer contract/project of mechanical and electrical engineering works for building service including Schematic / concept and detailed design.
• Preparation of tender drawing/specifications & cost estimates.
• Attend project meetings, site meetings & site inspections.
• Review of shop drawings and technical submissions.
• Contract administration.
• Testing and commissioning of electrical and mechanical systems.

Requirements:

• Degree in Mechanical / Electrical / Building Services Engineering.
• Good interpersonal and communication skills.
• Able to work independently, self-motivated and resourceful.

Salary:

• Commensurate with qualification and experience.

Responsibilities:

• Working with the development team, you will be responsible for the design, development, documentation, testing and delivery of the software solution for an Automatic Fare Collection (AFC) system or a high volume and performance intensive back office of an AFC system.
• Requirements gathering;
• Design, development, and maintenance of the software;
• Preparation and submission of deliverables throughout the software development lifecycles such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual, Training Manual and others documents as required in the standard adopted by the Authority;
• Assist the Authority with day-to-day application support issues; and
• Liaise with users on the requirement, design and testing issues.

Qualifications & Requirements:

• Recognised degree in Computer Science, IT or engineering with at least 5 years’ relevant experience in software development;
• Gone through at least one full software development lifecycle (SDLC) with experience in producing SDLC documentations;
• Extensive experience in analysing requirements, designing, development and delivering complex enterprise applications in Java/JEE, web programming on UNIX / LINUX and Windows environment;
• Proficiency with database programming such as SQL and DAO, and relevant experience with MySQL, PostgreSQL
• Experience in Spring Framework and Spring Boot;
• Experience in Software Modernization, Containerization, Microservices;
• Experience in Agile development methodology and continuous integration;
• Experience in writing Requirements Specification, Use Cases, Design Documentation, object-oriented software design and UML modelling;
• Proficiency in AWS ECS and Docker containerization, with a solid understanding of DevOps principles and best practices
• Strong analytical and problem-solving skills; and
• Good written and verbal communication skills in English.
• Self-motivated and a good team player.
• Added advantage if candidate is familiar with one or more of the following technologies:

1. Experience in Message Queues and/or Solace;
2. Experience in Cloud Computing, Kubernetes & Dockers, AWS Services like Amazon ECS Fargate, AWS RDS & Lambda;
3. Experience in Automatic Fare Collection (AFC) system;
4. Experience in EMV and Payment Card Industry Data Security Standard (PCI DSS);
5. Experience in Microsoft Active Directory
6. Experience in HTML / CSS / JavaScript / JSON
7. Experience in Secure Communications (SFTP, HTTPS, etc.)
8. Experience in Angular or equivalent
9. Experience in Java Unit Tests frameworks

Email to: [email protected] (134-002-Software Engineer (System))

• A1 Main Contractor
• 5.5 Alternate saturdays (South of Singapore)
• Building Project

Our client is in the Civil & Infrastructure Contractor and has a strong presence globally. They are looking to fill the role of C&S Design Engineer

Responsibilities:

• Prepare technical reports, designs, and detailed drawings.
• Perform calculations for pressures, loads, and stresses.
• Assess the strength of construction materials and select them appropriately.
• Provide expert advice on safe construction and design practices.
• Secure planning permissions and ensure compliance with building regulations.
• Analyze the configuration of essential structural components.
• Oversee and inspect contractor work to guarantee structural integrity.
• Inspect properties to assess conditions and foundational stability.
• Utilize computer-aided design (CAD) software for simulations and modeling.

Requirements:

• Degree in Civil or Structural Engineering.
• Professional registration with the Institute of Structural Engineers.
• Proven experience in project management.
• Advanced knowledge of construction techniques, materials, and legal standards.
• Strong grasp of physics and mathematics.
• Ability to collaborate effectively with other professionals.
• Exceptional attention to detail and excellent organizational skills.
• Ability to work efficiently under pressure and meet deadlines.
• Excellent communication skills and proficiency in IT.

OTHER INFORMATION:

• Location: South
• Working days: 5.5 Days
• Salary: Up to S$7,500 / Negotiable and Bonus (salary will be commensurate according to experience & qualifications).
• The Company strives to achieve employee satisfaction by providing attractive staff benefits, welfare & training programmes to all staff.

HOW TO APPLY:

Simply submit your application with your updated Resume in MS Word Format to David Sia Yi Sheng (EA Personnel Reg. No.: R1875905) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, David , at 6590 9958 or 9271 7510 for a confidential discussion.

Please click APPLY NOW button to submit your application

Please indicate the below information in your resume:

• Current & Expected salary
• Reason(s) for leaving
• Availability to commence work

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

• Simulate user issues to identify and resolve network and connectivity problems. Conduct root cause analysis to pinpoint the source of infrastructure incidents and devise temporary and permanent solutions.
• Recommend system modifications to address ongoing issues. Oversee updates and maintain an accurate system inventory.
• Mentor and train teams on resolving infrastructure-related incidents.
• Lead the planning and requirements phases of infrastructure network operations projects.
• Contribute to the design and implementation of infrastructure replacement plans. Manage the implementation of approved infrastructure changes and maintenance routines.
• Oversee network operations activities and the installation of network systems according to design specifications. Ensure alignment with service level agreements.
• Develop and manage service-level objectives and targets. Monitor performance to meet or exceed requirements.
• Develop client satisfaction metrics and service procedures. Propose recommendations to improve performance and client satisfaction.
• Pilot new tools, technologies, and processes to enhance infrastructure performance.
• Manage infrastructure network testing and implementation.
• Address identified vulnerabilities and ensure solutions are implemented in accordance with company policies.
• Gather performance and data usage statistics for capacity planning and reporting.
• Perform ongoing tuning and optimization of infrastructure network hardware and software components.
• Manage and troubleshoot SDWAN infrastructure.

Requirements:

• Bachelor's degree or equivalent diploma in IT, Computer Science, or related field.
• Certified in CCNP, NSE, and CCSA.
• Cloud certification and experience preferred.
• Proficient in network management tools such as SolarWinds, WLC, FortiAnalyzer, and FortiManager.
• Understanding of cloud network architecture, particularly Azure.
• Strong communication and interpersonal skills.
• Flexible to work outside of standard business hours.

To apply, please visit www.gmprecruit.com and search for Job Reference:24985

To learn more about this opportunity, please contact Gia Grace at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.

Job Description

• Industry/Organization Type: Manufacturing/Electronic Components and Boards
• Position Title: R&D Engineer
• Working Location: Bedok
• Working Hours: Monday – Friday, 8.15 AM – 6.15 PM
• Salary Package: Basic Salary up to $4,000 + Transport Allowance + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Researching electronic components and designing new products to meet market needs.
• Supporting the complete R&D project life cycle and participating in all phases from concept to manufacturing through designing, prototyping, validation, and production of R&D products, taking into account the functionality, feasibility, quality, manufacturability, costs, and completion time.
• Giving concise and informative demos/presentations to other team members or product managers about design concepts.
• Finalizing a design and its deliverables to facilitate a smooth transition to the relevant stakeholders.
• Preparing product documentation like the bill of material, material specification, and process documentation.
• Evaluating processes and design improvements.
• Coordinating with the Global R&D team.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Bachelor’s Degree in Engineering or Technology (Electrical/Electronics) or equivalent
• Has a minimum of 2 years of experience with passive electronic components design
• Has understanding and work knowledge of AutoCAD Electrical
• A good understanding of product safety, environmental testing, and electromagnetic compatibility (EMC) will be advantageous

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69868 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Summary:

As a Software Engineer on the Product Engineering team, you will be responsible for designing, developing, and improving core sub-systems in the card personalization process.

You will collaborate with cross-functional teams on ambitious projects, contributing to the enhancement of global infrastructure and ensuring the robustness of critical systems.

Responsibilities:

• Manage the full software development life cycle, including coding, unit testing, and integration testing.
• Participate in design reviews with peers and stakeholders.
• Document user guides and technical specifications.
• Conduct code reviews to ensure code quality and consistency.
• Collaborate with development, deployment, integration teams, and project managers in an Agile/Scrum environment.
• Set up and maintain CI/CD pipelines using GitLab.

Requirements:

• Strong hands-on experience with C#, .NET Core, Entity Framework, WPF, and WCF.
• Experience with application servers, particularly IIS, and Oracle databases.
• Proficiency in software engineering best practices.
• Strong knowledge of GIT version control and branching models.
• Hands-on experience in setting up CI/CD pipelines using GitLab.
• Familiarity with Kubernetes/Docker and microservices architecture.
• Understanding of security best practices and their application.

Qualifications:

• Bachelor’s degree in Computer Science, Engineering, or related discipline.
• At least 5 years of hands-on experience in web and WPF development, Windows/Web Services, and Desktop/Distributed Applications.

The Opportunity

• Opportunity to work with MNC Client
• 5 days' work week, Office Hours
• Working location: One-north business park

The Day-to-Day Activities

• Implement and maintain machine learning algorithms and edge AI models provided by the data scientist team on Android based IoT devices.
• Integrate machine learning models and optimize performance on Android platforms.
• Work on video and audio processing using machine learning techniques on Android devices.
• Develop sensor data processing algorithms for the applications on Android platforms.
• Provide technical support for product and operations teams.
• Write related technical documentation and contribute to patent applications.

The Must-Haves

• Bachelor’s degree in Computer Science, Electronic Engineering, or related fields, with 3+ years of experience in Android development and machine learning (framework layer & system services related).
• Proven track record of developing machine learning models and algorithms on Android platforms for successful commercial products or projects.
• Proficient in Java, Kotlin, or C/C++ languages, with good programming habits and large-scale software development experience.
• Familiar with Android kernel, including interrupt processing, memory management, process scheduling, device drivers, etc.
• Experience with Android system issue analysis and solving, including deadlock, crash, performance optimization, and low power optimization.
• Proficient in machine learning frameworks such as TensorFlow Lite, PyTorch Mobile, or similar.
• Experience in optimizing machine learning models for mobile devices.
• Excellent problem analysis and solving capabilities, communication skills, and teamwork.

Preferred Qualifications

• Experience in audio or video processing on Android systems.
• Experience with open source large language model (LLM) inference on devices.
• Familiarity with computer vision models or voice recognition models.
• Familiarity with machine learning model training, model distillation, model conversion for edge AI.

Next Step

Prepare your updated resume and expected package.

Simply click on 'Apply here' or email to [email protected] to drop your resume

All shortlisted candidates will be contacted.

Prasant Sirohi

EA Licence Number: 91C2918

Registration Number: R22106307

• Perform first level troubleshooting on all reported incidents and escalate incidents to 2nd level resolver groups as per work instructions
• Provide First Call Resolution (FCR) technical support
• Troubleshoot and investigate cause of user’s problem
• Update work information with all troubleshooting steps used in the ticketing system
• Set Incident to “Resolved” if User’s problem has been solved
• Reassign ticket if agent is unable to resolve ticket

Position Overview:

You would be part of a dynamic digital SoC design team that develops state-of-the-art video processing, neural processing, advanced video analytics accelerators, and the entire Camera Processor SoC. You would be joining the team to explore, evaluate and define innovative design SoC architectures, to meet or exceed the technical requirements of the SoC. You would be responsible for the successful implementation of the designs in Verilog/SystemVerilog coding, metrics measurement to meet key objectives & results, and follow-through in comprehensive verifications to successful silicon.

Requirements:

1. Experience in SoC architecture and design, and RTL coding with Verilog/SystemVerilog

2. Experience in ARM, RISC processor system

3. Experience in embedded C and assembly code programming

4. Experience in analysis of power, timing and area

5. Experience in at least one of scripting languages (e.g. Perl, Python, TCL, or Bash)

6. Disciplined, quality-minded, and highly driven for excellence

7. Excellent team player and good communication skills

8. MSEE/BSEE in Electrical Engineering or Computer Engineering

9. Candidates with relevant experiences would be offered as Staff, taking on higher responsibilities

10. Experience in always-on system, automotive system, secured system, bus interconnect, neural processing, video processing and video analytics is a plus

11. Experience in system modelling and simulation using emulator and SystemC is a plus

12. Passionate and strong in general programming is a plus

Roles & Responsibilities:

Job Description

• Involve in the project or maintenance services related with General Security Systems, Alarms
• Systems, CCTV Systems , Access control systems and Server & Network infrastructure and whenever required.
• Perform Installation, Implementation, Configuration and testing of system/storage equipment & setup
• Troubleshoot problems encountered on site
• Perform OS hardening, patching and updating on servers/VM
• Develop implementation plan, migration plan and acceptance test plan for the project.
• Conduct acceptance test with users and address the testing findings/issues
• Work closely with Project/Maintenance Managers in planning the implementation tasks
• Maintain accurate and consistent set of work instructions service delivery processes.
• Develop As-built documentation for handover

Job Requirements

• Candidate must possess at least a Professional Certificate/Nitec, Diploma,
• Advanced/Higher/Graduate Diploma, Engineering (Electrical/Electronic/InformationTechnology ) or equivalent
• Minimum 2 years’ experience in Operational Technology/Information Technology industry
• Knowledge of networking and IP/TCP protocol
• In-depth knowledge in CCTV, Access Control and System Server etc.
• Hands-on experience in security-related tasks such as OS tightening, patching and updating, virus scanning will be an added advantage.
• IT Certification in windows system & storage, network, database, virtualization, cloud technologies will be an added advantage
• Good communication skills and positive working attitude.
• Candidate must possess a Class 3 driving license

Rajkumar Renganathan

EA Licence Number: 23C2060 Registration ID is R1983662

Disclaimer: The company is committed to ensuring the privacy and security of your information. By submitting this form, you consent to the collection, processing, and retention of the information you provide. The data collected (which may include your contact details, educational background, work experience and skills) will be used solely for the purpose of evaluating your qualifications for the position you're applying for. Your data will be stored securely and retained for the duration necessary to fulfill our hiring process. If you are not selected for the position, your data will be kept on file for a limited period in case future opportunities arise. You have the right to access, correct, or delete your data at any time by contacting us at Quess Singapore | A Leading Staffing Services Provider in Singapore (quesscorp.sg)